Electrostatically mediated interactions between cationic lipid-DNA particles and an anionic surface.

In an effort to model the interaction of lipid-based DNA delivery systems with anionic surfaces, such as a cell membrane, we have utilized microelectrophoresis to characterize how electrokinetic measurements can provide information on surface charge and binding characteristics. We have established that cationic lipids, specifically N-N-dioleoyl-N,N-dimethylammonium chloride (DODAC), incorporated into liposomes prepared with 1, 2-dioleoyl-i-glycero-3-phosphoethanolamine (DOPE) or 1, 2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) at 50 mol%, change the inherent electrophoretic mobility of anionic latex polystyrene beads. Self-assembling lipid-DNA particles (LDPs), prepared at various cationic lipid to negative DNA phosphate charge ratios, effected no changes in bead mobility when the LDP charge ratio (+/-) was equal to or less than 1. Increasing the LDP concentration in a solution of 0.1% (w/v) anionic beads resulted in a charge reversal effect when a net charge of LDP to total bead charge ratio (+/-) of 1:1 was observed. LDP formulations, utilizing either DOPE or DOPC, showed similar titration profiles with a charge reversal observed at a 1:1 net LDP to bead charge ratio (+/-). It was confirmed through centrifugation studies that the DNA in the LDP was associated with the anionic latex beads through electrostatic interactions. LDP binding, rather than the binding of dissociated cationic lipids, resulted in the observed electrophoretic mobility changes of the anionic latex beads.     

Assessment of methods for covalent binding of nucleic acids to magnetic beads, Dynabeads, and the characteristics of the bound nucleic acids in hybridization reactions.

Dynabeads are magnetic monosized beads with high stability, high uniformity, unique paramagnetic properties, low particle-particle interaction, and high dispersibility. Different reactive groups; hydroxyl, carboxyl and amino groups can be attached to the surface. Several methods for covalent attachment of DNA or oligonucleotides to the beads were investigated. Best coupling yields were obtained by carbodiimide-mediated end-attachment of 5'-phosphate and 5'-NH2 modified nucleic acids to respectively amino and carboxyl beads. The carboxyl beads showed a low degree of non-specific binding, while a better yield of end-attached nucleic acids was obtained using the amino beads. The DNA-beads worked efficiently in hybridization experiments, and the kinetics of hybridization approach those of solution hybridization.     

Diffusion of macromolecules in agarose gels: comparison of linear and globular configurations.

The diffusion coefficients (D) of different types of macromolecules (proteins, dextrans, polymer beads, and DNA) were measured by fluorescence recovery after photobleaching (FRAP) both in solution and in 2% agarose gels to compare transport properties of these macromolecules. Diffusion measurements were conducted with concentrations low enough to avoid macromolecular interactions. For gel measurements, diffusion data were fitted according to different theories: polymer chains and spherical macromolecules were analyzed separately. As chain length increases, diffusion coefficients of DNA show a clear shift from a Rouse-like behavior (DG congruent with N0-0.5) to a reptational behavior (DG congruent with N0-2.0). The pore size, a, of a 2% agarose gel cast in a 0.1 M PBS solution was estimated. Diffusion coefficients of the proteins and the polymer beads were analyzed with the Ogston model and the effective medium model permitting the estimation of an agarose gel fiber radius and hydraulic permeability of the gels. Not only did flexible macromolecules exhibit greater mobility in the gel than did comparable-size rigid spherical particles, they also proved to be a more useful probe of available space between fibers.     

Microencapsulation of nanoparticulate complexes of DNA with cationic lipids and polymers in pectin beads for targeted gene delivery

Nanoparticulate complexes of plasmid DNA (pDNA) with cationic liposomes/polymer, of approx 200 nm diameter, were encapsulated with a high degree of efficiency within calcium pectinate gel beads. Electron microscopy showed the DNA nanocomplexes to be evenly distributed throughout the gel matrix. Controlled release of pDNA-lipid nanocomplexes was achieved by the action of pectinase enzymes, whereas release of naked and polymer-complexed DNA was found to be more greatly influenced by the swelling behavior of the polysaccharide matrices in buffer alone. Physical degradation of pDNA within pectin beads was found to be accelerated during bead drying, most probably as a result of shear forces generated within the gel matrices by the evaporation of water. Plasmid complexation with cationic liposomes provided a greater degree of protection for the DNA during bead drying than complexation with cationic polymer, and was shown to successfully transfect cultured cells after release from the beads, via the action of pectinase. Observations concerning the physical stability of nanocomplexed pDNA, and its encapsulation within and release from pectin gel beads, are discussed with reference to the electrostatic interactions existing between the various components.     

Bead Aggregation Assays for the Characterization of Putative Cell Adhesion Molecules

Cell-cell adhesion is fundamental to multicellular life and is mediated by a diverse array of cell surface proteins. However, the adhesive interactions for many of these proteins are poorly understood. Here we present a simple, rapid method for characterizing the adhesive properties of putative homophilic cell adhesion molecules. Cultured HEK293 cells are transfected with DNA plasmid encoding a secreted, epitope-tagged ectodomain of a cell surface protein. Using functionalized beads specific for the epitope tag, the soluble, secreted fusion protein is captured from the culture medium. The coated beads can then be used directly in bead aggregation assays or in fluorescent bead sorting assays to test for homophilic adhesion. If desired, mutagenesis can then be used to elucidate the specific amino acids or domains required for adhesion. This assay requires only small amounts of expressed protein, does not require the production of stable cell lines, and can be accomplished in 4 days.     

The mobility minima in pulsed-field capillary electrophoresis of large DNA.

Pulsed-field capillary electrophoresis represents a new tool for rapid and highly efficient separations of large biopolymers. The method has been utilized here to study dependencies of the electrophoretic mobility upon the frequency and pulse shape of applied voltage for large, double-stranded DNA molecules (5-100 kb) migrating in neutral polymer solutions. Two different shapes of alternating electric field (sine- and square-wave impulses) were examined with the frequency values ranging from 1 to 30 Hz. The linear dependence between duration of the forward pulse (at which the DNA molecule experiences a minimum mobility) and the product N.In(N) (where N is the number of base pairs) was experienced in field-inversion gel electrophoresis, while exponential dependence was found with the sinusoidal electric field. The mobility minima were lower in field-inversion electrophoresis than with the biased sinusoidal-field technique. The DNA (5 kb concatamers) was adequately separated using a ramp of frequency in the square-wave electric field, in approximately 1 h. The migration order of DNA fragments was referenced through adding a monodisperse DNA (48.5 kb) into the sample. The band inversion phenomena were not observed under any experimental conditions used in this work.     

One-bead, one-compound peptide library sequencing via high-pressure ammonia cleavage coupled to nanomanipulation/nanoelectrospray ionization mass spectrometry

Biological screening of one-bead, one-compound (OBOC) combinatorial peptide libraries is routinely carried out with the peptide remaining bound to the resin bead during screening. After a hit is identified, the bead is isolated, the peptide is cleaved from the bead, and its sequence is determined. We have developed a new technique for cleavage of peptides from resin beads whereby exposure of a 4-hydroxymethyl benzoic acid (HMBA)-linked peptide to high-pressure ammonia gas led to efficient cleavage in as little as 5 min. Here we also report a new method of extracting peptide from individual library beads for its introduction into a mass spectrometer that uses nanomanipulation combined with nanoelectrospray ionization mass spectrometry (NSI MS). Single beads analyzed by nanomanipulation/NSI MS were found to give identical MS results to those of bulk samples. Detection of 18 unique cleaved peptides 1 to 8 amino acids in length, and sequencing of 14 different peptide sequences 4 to 8 amino acids in length, was demonstrated on a combination of bulk samples and ones from individual beads of an OBOC library. The method was highly reproducible, with 100% of attempts to extract peptide resulting in high-quality MS data. This new collection of techniques allows rapid, reliable, environmentally responsible sequencing of hit beads from combinatorial peptide libraries.     

DNA-Binding ability of GAGA zinc finger depends on the nature of amino acids present in the beta-hairpin

The GAGA factor of Drosophila melanogaster uses a single Cys2-His2-type zinc finger for specific DNA binding. Comparative sequence alignment of the GAGA zinc finger core with other structurally characterized zinc fingers reveals that the beta-hairpin of the GAGA zinc finger prefers amino acids with an aliphatic side-chain different from those of other zinc fingers. To probe the substitution effect of aromatic amino acids in the beta-hairpin on the DNA binding, three mutant peptides were designed by substituting consensus phenylalanine, an aromatic amino acid, at key positions in the beta-hairpin region. The metal-binding and the overall fold of the mutant peptides are very similar to those of the wild-type as shown by UV-vis absorption spectroscopy and circular dichroism spectroscopy. However, the gel mobility shift assay and isothermal calorimetric studies demonstrated that none of the mutants are able to bind the cognate DNA substrate, although the mutation is confined only to the beta-hairpin region. The present results suggest that the nature of the amino acids in the beta-hairpin plays an important role in the DNA-binding of the GAGA factor protein.     

Immobilization of Saccharomyces uvarum cells in porous beads of polyacrylamide gel for ethanolic fermentation

Summary A procedure which does not involve the use of an immiscible organic solvent phase is described for the entrapment of yeast cells in porous beads of polyacrylamide gel. The cells are rapidly dispersed at 4° C in an aqueous solution containing sodium alginate and acrylamide-N,Nmethylene-bis-acrylamide monomer, and the suspension is immediately dropped into a solution of calcium formate to give calcium alginate coated beads. Polyacrylamide gel forms within the bead. The calcium alginate is subsequently leached out of the composite bead with either sodium citrate or potassium phosphate buffer solution. Cells of Saccharomyces uvarum ATCC 26 602 entrapped in such polyacrylamide beads ferment cane molasses in batch mode at higher specific ethanol productivity than a free cell suspension. Their volumetric productivity in continuous fermentation is higher than that of Ca²⁺-alginate immobilized cells.NCL Communication No. 4383     

Model and computer simulations of the motion of DNA molecules during pulse field gel electrophoresis

A model is presented for the motion of individual molecules of DNA undergoing pulse field gel electrophoresis (PFGE). The molecule is represented by a chain of charged beads connected by entropic springs, and the gel is represented by a segmented tube surrounding the beads. This model differs from earlier reptation/tube models in that the tube is allowed to leak in certain places and the chain can double over and flow out of the side of the tube in kinks. It is found that these kinks often lead to the formation of U shapes, which are a major source of retardation in PFGE. The results of computer simulations using this model are compared with real DNA experimental results for the following cases: steady field motion as seen in fluorescence microscopy, mobility in steady fields, mobility in transverse field alternation gel electrophoresis (TFAGE), mobility in field inversion gel electrophoresis (FIGE), and linear dichroism (LD) of DNA in agarose gels during PFGE. Good agreement between the simulations and the experimental results is obtained.     

Survival of Bifidobacterium longum Immobilized in Calcium Alginate Beads in Simulated Gastric Juices and Bile Salt Solution

Bifidobacterium longum KCTC 3128 and HLC 3742 were independently immobilized (entrapped) in calcium alginate beads containing 2, 3, and 4% sodium alginate. When the bifidobacteria entrapped in calcium alginate beads were exposed to simulated gastric juices and a bile salt solution, the death rate of the cells in the beads decreased proportionally with an increase in both the alginate gel concentration and bead size. The initial cell numbers in the beads affected the numbers of survivors after exposure to these solutions; however, the death rates of the viable cells were not affected. Accordingly, a mathematical model was formulated which expressed the influences of several parameters (gel concentration, bead size, and initial cell numbers) on the survival of entrapped bifidobacteria after sequential exposure to simulated gastric juices followed by a bile salt solution. The model proposed in this paper may be useful for estimating the survival of bifidobacteria in beads and establishing optimal entrapment conditions.     

Survival of Bifidobacterium longum immobilized in calcium alginate beads in simulated gastric juices and bile salt solution

Bifidobacterium longum KCTC 3128 and HLC 3742 were independently immobilized (entrapped) in calcium alginate beads containing 2, 3, and 4% sodium alginate. When the bifidobacteria entrapped in calcium alginate beads were exposed to simulated gastric juices and a bile salt solution, the death rate of the cells in the beads decreased proportionally with an increase in both the alginate gel concentration and bead size. The initial cell numbers in the beads affected the numbers of survivors after exposure to these solutions; however, the death rates of the viable cells were not affected. Accordingly, a mathematical model was formulated which expressed the influences of several parameters (gel concentration, bead size, and initial cell numbers) on the survival of entrapped bifidobacteria after sequential exposure to simulated gastric juices followed by a bile salt solution. The model proposed in this paper may be useful for estimating the survival of bifidobacteria in beads and establishing optimal entrapment conditions.     

Translational friction of a particle inside a vesicle studied by an extended shell method

The translational friction of a particle inside a rigid hollow sphere is determined in this work. This should be important in model studies of solute diffusion in cells or vesicles. An extended shell algorithm is developed and used in which the cell or vesicle is modeled as a large number of beads. In the extended algorithm, the shell is divided into groups of beads and the assumption is made that the force exerted by each bead on the solvent is constant within a group. The algorithm is tested by using it to determine the translational friction constants of spheres and prolate ellipsoids modeled as shells of beads.     

An integrated laser trap/flow control video microscope for the study of single biomolecules

We have developed an integrated laser trap/flow control video microscope for mechanical manipulation of single biopolymers. The instrument is automated to maximize experimental throughput. A single-beam optical trap capable of trapping micron-scale polystyrene beads in the middle of a 200-microm-deep microchamber is used, making it possible to insert a micropipette inside this chamber to hold a second bead by suction. Together, these beads function as easily exchangeable surfaces between which macromolecules of interest can be attached. A computer-controlled flow system is used to exchange the liquid in the chamber and to establish a flow rate with high precision. The flow and the optical trap can be used to exert forces on the beads, the displacements of which can be measured either by video microscopy or by laser deflection. To test the performance of this instrument, individual biotinylated DNA molecules were assembled between two streptavidin beads, and the DNA elasticity was characterized using both laser trap and flow forces. DNA extension under varying forces was measured by video microscopy. The combination of the flow system and video microscopy is a versatile design that is particularly useful for the study of systems susceptible to laser-induced damage. This capability was demonstrated by following the translocation of transcribing RNA polymerase up to 650 s.     

Assessment of antral grinding of a model solid meal with echo-planar imaging

Mathematical modeling of how physical factors alter gastric emptying is limited by lack of precise measures of the forces exerted on gastric contents. We have produced agar gel beads (diameter 1.27 cm) with a range of fracture strengths (0.15-0.90 N) and assessed their breakdown by measuring their half-residence time (RT(1/2)) using magnetic resonance imaging. Beads were ingested either with a high (HV)- or low (LV)-viscosity liquid nutrient meal. With the LV meal, RT(1/2) was similar for bead strengths ranging from 0.15 to 0.65 N but increased from 22 +/- 2 min (bead strength <0.65 N) to 65 +/- 12 min for bead strengths >0.65 N. With the HV meal, emptying of the harder beads was accelerated. The sense of fullness after ingesting the LV meal correlated linearly (correlation coefficient = 0.99) with gastric volume and was independently increased by the harder beads, which were associated with an increased antral diameter. We conclude that the maximum force exerted by the gastric antrum is close to 0.65 N and that gastric sieving is impaired by HV meals.     

Immobilization of recombinant nanobiofiber CS3 fimbriae onto alginate beads for improvement of cadmium biosorption

A cell surface display system with metalbinding properties was previously developed using CS3 fimbriae, which are hollow tubes 20 nm-thick and 2 nm in diameter. In this study, hybrid CS3 pili were separated from recombinant Escherichia coli and entrapped in calcium alginate gel beads in order to improve their stabilization and also adsorption of heavy metals. The surface morphology of the gel beads containing pili was investigated by scanning electron microscopy (SEM). Immunofluorescence microscopy was employed to confirm the attachment of nanobiofibers to the alginate beads. The effects of three variables (sodium alginate concentration, protein to alginate mass ratio, and bead size) at two levels each on Cd²⁺ biosorption efficiency were investigated by full factorial experimental design. A second-order polynomial equation modeled the design space for the process response of cadmium removal capacity. The optimal values of the factors were obtained as follows: 1% sodium alginate concentration, 0.25 protein to alginate mass ratio, and a 6 mm bead size. Under these conditions, Cd²⁺ was adsorbed at 45.45 mg/g to the nanobiofiber. The results indicate that the immobilized recombinant hybrid CS3 pili may be an appropriate biosorbent for removal of heavy metals from polluted aquatic environments.     

Latex beads as probes of a neural crest pathway: effects of laminin, collagen, and surface charge on bead translocation

In the trunk region of avian embryos, neural crest cells migrate along two pathways: dorsally just under the ectoderm, and ventrally between the neural tube and the somites. Previous work from this laboratory has shown that uncoated latex beads are able to translocate along the ventral neural crest pathway after injection into young embryos; however, beads coated with fibronectin are restricted from the ventral route ( Bronner -Fraser, M.E., 1982, Dev. Biol., 91: 50-63). Here, we extend these observations to determine the effects of other macromolecules on bead distribution. The data show that laminin-coated beads, like fibronectin-coated beads, are restricted from the ventral pathway. In contrast, beads coated with type I collagen translocate ventrally after injection. Because macromolecules have characteristic charge properties, changes in surface charge caused by coating the beads may confound interpretation of the results. Electrostatic effects on bead movement were examined by coating the latex beads with polyamino acids in order to predictably alter the initial surface charge. The surface charge before injection was measured for beads coated with amino acid polymers or with various biologically important macromolecules; the subsequent translocation ability of these beads was then monitored in the embryo. Polylysine-coated beads (positively charged) were restricted from the ventral pathway as were fibronectin and laminin-coated beads, even though fibronectin and laminin beads were both negatively charged. In contrast, polytyrosine -coated beads ( neutrally charged) translocated ventrally as did negatively charged collagen-coated or uncoated beads. The results demonstrate that no correlation exists between the charge properties on the latex bead surface and their subsequent ability to translocate along the ventral pathway. Therefore, an adhesion mechanism independent of surface charge effects must explain the restriction or translocation of latex beads on a neural crest pathway.     

Transport limitation of chlorine disinfection of Pseudomonas aeruginosa entrapped in alginate beads

An artificial biofilm system consisting of Pseudomonas aeruginosa entrapped in alginate and agarose beads was used to demonstrate transport limitation of the rate of disinfection of entrapped bacteria by chlorine. Alginate gel beads with or without entrapped bacteria consumed chlorine. The specific rate of chlorine consumption increased with increasing cell loading in the gel beads and decreased with increasing bead radius. The value of an observable modulus comparing the rates of reaction and diffusion ranged from less than 0.1 to 8 depending on the bead radius and cell density. The observable modulus was largest for large (3-mm-diameter) beads with high cell loading (1.8 x 10(9) cfu/cm(3)) and smallest for small beads (0.5 mm diameter) with no cells added. A chlorine microelectrode was used to measure chlorine concentration profiles in agarose beads (3.0 mm diameter). Chlorine fully penetrated cell-free agarose beads rapidly; the concentration of chlorine at the bead center reached 50% of the bulk concentration within approximately 10 min after immersion in chlorine solution. When alginate and bacteria were incorporated into an agarose bead, pronounced chlorine concentration gradients persisted within the gel bead. Chlorine did gradually penetrate the bead, but at a greatly retarded rate; the time to reach 50% of the bulk concentration at the bead center was approximately 46 h. The overall rate of disinfection of entrapped bacteria was strongly dependent on cell density and bead radius. Small beads with low initial cell loading (0.5 mm diameter, 1.1 x 10(7) cfu/cm(3)) experienced rapid killing; viable cells could not be detected (<1.6 x 10(5) cfu/cm(3)) after 15 min of treatment in 2.5 mg/L chlorine. In contrast, the number of viable cells in larger beads with a higher initial cell density (3.0 mm diameter, 2.2 x 10(9) cfu/cm(3)) decreased only about 20% after 6 h of treatment in the same solution. Spatially nonuniform killing of bacteria within the beads was demonstrated by measuring the transient release of viable cells during dissolution of the beads. Bacteria were killed preferentially near the bead surface. Experimental results were consistent with transport limitation of the penetration of chlorine into the artificial biofilm arising from a reaction-diffusion interaction. The methods reported here provide tools for diagnosing the mechanism of biofilm resistance to reactive antimicrobial agents in such applications as the treatment of drinking and cooling waters. (c) 1996 John Wiley & Sons, Inc.     

Oxygen diffusivity in gel beads containing viable cells

This article proposes a simple steady-state method for measuring the effective diffusion coefficient of oxygen (D(e)) in gel beads entrapping viable cells. We applied this method to the measurement of D(e) in Ca- and Ba-alginate gel beads entrapping Saccharomyces cerevisiae and Pseudomonas ovalis. The diffusivity of oxygen through gel beads containing viable cells was measured within an accuracy of +/-7% and found not to be influenced by cell density (0-30 g/L gel), cell type, and cell viability in gel beads. The oxygen diffusivity in the Ca-alginate gel beads was superior to that of the Ba-alginate gel beads, and the D(e) in the Ca-alginate gel beads nearly equalled the molecular diffusion coefficient in the liquid containing the gel beads. The oxygen concentration profile in a single Ca-alginate gel bead was calculated and compared to the distribution of mycelia of Aspergillus awamori grown in that gel bead. This procedure indicated that the oxygen concentration profile is useful for the estimation of the thickness of the cell layer in a gel bead. Numerical investigation revealed that high effectiveness factors, greater than 0.8, could be obtained using microgel beads with a radius of 0.25 mm.     

The SAF-box domain of chromatin protein DEK

DEK is an abundant chromatin protein in metazoans reaching copy numbers of several millions/nucleus. Previous work has shown that human DEK, a protein of 375 amino acids, has two functional DNA-binding domains, of which one resides in a central part of the molecule and contains sequences corresponding to the scaffold attachment factor-box (SAF-box) domain as found in a growing number of nuclear proteins. Isolated SAF-box peptides (amino acids 137–187) bind weakly to DNA in solution, but when many SAF-box peptides are brought into close proximity on the surface of Sephadex beads, cooperative effects lead to a high affinity to DNA. Furthermore, a peptide (amino acids 87–187) that includes a sequence on the N-terminal side of the SAF-box binds efficiently to DNA. This peptide prefers four-way junction DNA over straight DNA and induces supercoils in relaxed circular DNA just like the full-length DEK. Interestingly, however, the 87–187 amino acid peptide introduces negative supercoils in contrast to the full-length DEK, which is known to introduce positive supercoils. We found that two adjacent regions (amino acids 68–87 and 187–250) are necessary for the formation of positive supercoils. Our data contribute to the ongoing characterization of the abundant and ubiquitous DEK chromatin protein.