Supramolecular assembly of collagen triblock peptides

The relationship between primary sequence and collagen triple-helix formation is relatively well characterized, while higher levels of structural assembly from these sequences is poorly understood. To address this gap, a new collagen-like triblock peptide design was used to study the relationship between amino acid sequence and supramolecular assembly. Four collagen-like peptides with the sequence (Glu)(5)(Gly-Xaa-Hyp-Gly-Pro-Hyp)(6)(Glu)(5) and corresponding to Xaa = alanine, proline, serine, or valine, and an analogous peptide without the glutamic acid end blocks, were solubilized in water at high concentrations (20-150 mg/mL) and analyzed in optical polarizing microscopy and transmission electron microscopy. Some of the peptides self-assembled into supramolecular structures, the nature of which was determined by the core collagen-like sequence. The globular end blocks appeared necessary for these short triple-helix-forming peptides to spontaneously organize into supramolecular structures in solution and also provided enhanced thermal stability based on CD analysis. The results indicate a strong dependence of the peptide triblock assembly behavior on the identity of the guest residue Xaa; nematic order when Xaa was valine, no organization when Xaa was serine, and banded spherulites displaying a cholesteric-like twist when Xaa was proline or alanine. According to these results, the identity of the amino acid in position Xaa of the triplet Gly-Xaa-Yaa dramatically determined the type of supramolecular assembly formed by short triple helices based on collagen-triblock like sequences. Moreover, the structural organization observed for these collagen-triblock peptides was analogous to some assemblies observed for native collagen in vivo and in vitro. The amino acid sequence in the native collagen proteins may therefore be a direct determinant of the different supramolecular architectures found in connective tissues.     

Folding and conformational consequences of glycine to alanine replacements at different positions in a collagen model peptide

The collagen model peptide T1-892 includes a C-terminal nucleation domain, (Gly-Pro-Hyp)(4), and an N-terminal (Gly-X-Y)(6) sequence taken from type I collagen. In osteogenesis imperfecta (OI) and other collagen diseases, single base mutations often convert one Gly to a larger residue, and T1-892 homologues modeling such mutations were synthesized with Gly to Ala substitutions in either the (Gly-Pro-Hyp)(4) domain, Gly25Ala, or the (Gly-X-Y)(6) domain, Gly10Ala. CD and NMR studies show the Gly10Ala peptide forms a normal triple-helix at the C-terminal end and propagates from the C- to the N-terminus until the Gly --> Ala substitution is encountered. At this point, triple-helix folding is terminated and cannot be reinitiated, leaving a nonhelical N-terminus. A decreased thermal stability is observed as a result of the shorter length of the triple-helix. In contrast, introduction of the Gly to Ala replacement at position 25, in the nucleation domain, shifts the monomer/trimer equilibrium toward the monomer form. The increased monomer and lower trimer populations are reflected in the dramatic decrease in triple-helix content and stability. Unlike the Ala replacement at position 10, the Ala substitution in the (Gly-Pro-Hyp)(4) region can still be incorporated into a triple-helix, but at a greatly decreased rate of folding, since the original efficient nucleation site is no longer operative. The specific consequences of Gly to Ala replacements in two distinctive sequences in this triple-helical peptide may help clarify the variability in OI clinical severity resulting from mutations at different sites along type I collagen chains.     

Structural changes in lipid membranes and collagen irradiated with UV light and the protective effect of plant extracts

The results of experimental studies on the effect of UV irradiation on collagen, artificial lipid membranes, and rat skin, as well as the protective effect of plant extracts from UV radiation are presented. The irradiation of collagen and lipid membranes with solar and artificial UV light leads to structural changes in these objects. In particular, collagen molecules denature and transfer into a new conformational state. The effect of UV light on lipid membranes and liposomes leads to a disturbance of membrane structure, which is connected with a decrease in the number of lipid molecules involved in the cooperative transition from gel into a liquid crystal state. The components of plant extracts (mainly flavonoids) absorb UV radiation in the erythem-forming spectral area and block the destructive processes occurring in collagen and lipids.     

Triple-helical peptides: an approach to collagen conformation, stability, and self-association

Peptides have been an integral part of the collagen triple-helix structure story, and have continued to serve as useful models for biophysical studies and for establishing biologically important sequence-structure-function relationships. High resolution structures of triple-helical peptides have confirmed the basic Ramachandran triple-helix model and provided new insights into the hydration, hydrogen bonding, and sequence dependent helical parameters in collagen. The dependence of collagen triple-helix stability on the residues in its (Gly-X-Y)(n) repeating sequence has been investigated by measuring melting temperatures of host-guest peptides and an on-line collagen stability calculator is now available. Although the presence of Gly as every third residue is essential for an undistorted structure, interruptions in the repeating (Gly-X-Y)(n) amino acid sequence pattern are found in the triple-helical domains of all nonfibrillar collagens, and are likely to play a role in collagen binding and degradation. Peptide models indicate that small interruptions can be incorporated into a rod-like triple-helix with a highly localized effect, which perturbs hydrogen bonds and places the standard triple-helices on both ends out of register. In contrast to natural interruptions, missense mutations which replace one Gly in a triple-helix domain by a larger residue have pathological consequences, and studies on peptides containing such Gly substitutions clarify their effect on conformation, stability, and folding. Recent studies suggest peptides may also be useful in defining the basic principles of collagen self-association to the supramolecular structures found in tissues.     

Sweet is stable: glycosylation stabilizes collagen

For most collagens, the melting temperature (T(m)) of the triple-helical structure of collagen correlates with the total content of proline (Pro) and 4-trans-hydroxyproline (Hyp) in the Xaa and Yaa positions of the -Gly-Xaa-Yaa- triplet repeat. The cuticle collagen of the deep-sea hydrothermal vent worm Riftia pachyptila, despite a very low content of Pro and Hyp, has a relatively high thermal stability. Rather than Hyp occupying the Yaa position, as is normally found in mammalian collagens, this position is occupied by threonine (Thr) which is O-glycosylated. We compare the triple-helix forming propensities in water of two model peptides, Ac-(Gly-Pro-Thr)(10)-NH(2) and Ac-(Gly-Pro-Thr(Galbeta))(10)-NH(2), and show that a collagen triple-helix structure is only achieved after glycosylation of Thr. Thus, we show for the first time that glycosylation is required for the formation of a stable tertiary structure and that this modification represents an alternative way of stabilizing the collagen triple-helix that is independent of the presence of Hyp.     

Characterization of the nucleation step and folding of a collagen triple-helix peptide

Peptide T1-892 is a triple-helical peptide designed to include two distinct domains: a C-terminal (Gly-Pro-Hyp)(4) sequence, together with an N-terminal 18-residue sequence from the alpha1(I) chain of type I collagen. Folding experiments of T1-892 using CD spectroscopy were carried out at varying concentrations and temperatures, and fitting of kinetic models to the data was used to obtain information about the folding mechanism and to derive rate constants. Proposed models include a heterogeneous population of monomers with respect to cis-trans isomerization and a third-order folding reaction from competent monomer to the triple helix. Fitting results support a nucleation domain composed of all or most of the (Gly-Pro-Hyp)(4) sequence, which must be in trans form before the monomer is competent to initiate triple-helix formation. The folding of competent monomer to a triple helix is best described by an all-or-none third-order reaction. The temperature dependence of the third-order rate constant indicates a negative activation energy and provides information about the thermodynamics of the trimerization step. These CD studies complement NMR studies carried out on the same peptide at high concentrations, illustrating how the rate-limiting folding step is affected by changes in concentration. This sequence preference of repeating Gly-Pro-Hyp units for the initiation of triple-helix formation in peptide T1-892 may be related to features in the triple-helix folding of collagens.     

Transformation of the mechanism of triple-helix peptide folding in the absence of a C-terminal nucleation domain and its implications for mutations in collagen disorders

Folding abnormalities of the triple helix have been demonstrated in collagen diseases such as osteogenesis imperfecta in which the mutation leads to the substitution of a single Gly in the (Gly-X-Y)n sequence pattern by a larger residue. Model peptides can be used to clarify the details of normal collagen folding and the consequences of the interruption of that folding by a Gly substitution. NMR and CD studies show that placement of a (GPO)4 nucleation domain at the N terminus rather than the C terminus of a native collagen sequence allows the formation of a stable triple helix but alters the folding mechanism. Although C- to N-terminal directional folding occurs when the nucleation domain is at the C terminus, there is no preferential folding direction when the nucleation domain is at the N terminus. The lack of zipper-like directional folding does not interfere with triple-helix formation, and when a Gly residue is replaced by Ser to model an osteogenesis imperfecta mutation, the peptide with the N-terminal (GPO)4 domain can still form a good triple helix N-terminal to the mutation site. These peptide studies raise the possibility that mutant collagen could fold in a C to N direction in a zipper-like manner up to the mutation site and that completion of the triple helix N-terminal to the mutation would involve an alternative mechanism.     

Mechanism of stabilization of a bacterial collagen triple helix in the absence of hydroxyproline

The Streptococcus pyogenes cell-surface protein Scl2 contains a globular N-terminal domain and a collagen-like domain, (Gly-Xaa-X'aa)(79), which forms a triple helix with a thermal stability close to that seen for mammalian collagens. Hyp is a major contributor to triple-helix stability in animal collagens, but is not present in bacteria, which lack prolyl hydroxylase. To explore the basis of bacterial collagen triple-helix stability in the absence of Hyp, biophysical studies were carried out on recombinant Scl2 protein, the isolated collagen-like domain from Scl2, and a set of peptides modeling the Scl2 highly charged repetitive (Gly-Xaa-X'aa)(n) sequences. At pH 7, CD spectroscopy, dynamic light scattering, and differential scanning calorimetry of the Scl2 protein all showed a very sharp thermal transition near 36 degrees C, indicating a highly cooperative unfolding of both the globular and triple-helix domains. The collagen-like domain isolated by trypsin digestion showed a sharp transition at the same temperature, with an enthalpy of 12.5 kJ/mol of tripeptide. At low pH, Scl2 and its isolated collagen-like domain showed substantial destabilization from the neutral pH value, with two thermal transitions at 24 and 27 degrees C. A similar destabilization at low pH was seen for Scl2 charged model peptides, and the degree of destabilization was consistent with the strong pH dependence arising from the GKD tripeptide unit. The Scl2 protein contained twice as much charge as human fibril-forming collagens, and the degree of electrostatic stabilization observed for Scl2 was similar to the contribution Hyp makes to the stability of mammalian collagens. The high enthalpic contribution to the stability of the Scl2 collagenous domain supports the presence of a hydration network in the absence of Hyp.     

Type X collagen contains two cleavage sites for a vertebrate collagenase

Type X collagen was cleaved at two sites by a purified human skin collagenase. Two experimental approaches were used to identify the location of the cleavage sites. First, native type X collagen was digested with the enzyme, and the rotary-shadowed products were visualized in the electron microscope. The major collagenase fragment of type X contained the epitope recognized by a monoclonal antibody (X-AC9). The antibody was used as a point of reference to locate the position of the cleavage fragment within the native molecule. Second, the digestion of radiolabeled type X collagen substrates was analyzed by gel electrophoresis. The complete cleavage of type X generated three products with 32-, 18-, and 9-kDa chains. The 32-kDa peptides were present in a triple-helical conformation and demonstrated a midpoint denaturation temperature of 43 degrees C in CD experiments. The 18-kDa peptide contained the tyrosine-rich globular domain of the molecule. The 9-kDa peptide was derived from the triple-helical end of the native molecule. Type X collagen was cleaved more rapidly by the vertebrate collagenase than was type II collagen in in vitro solution studies.     

The triple helical structure and stability of collagen model peptide with 4(S)-hydroxyprolyl-Pro-Gly units

Extensive studies on the structure of collagen have revealed that the hydroxylation of Pro residues in a variety of model peptides with the typical (X-Y-Gly)(n) repeats (X and Y: Pro and its analogues) represents one of the major factors influencing the stability of triple helices. While(2S,4R)-hydroxyproline (Hyp) at the position Y stabilizes the triple helix, (2S,4S)-hydroxyproline (hyp) at the X-position destabilizes the helix as demonstrated that the triple helix of (hyp-Pro-Gly)(15) is less stable than that of (Pro-Pro-Gly)(15) and that a shorter peptide (hyp-Pro-Gly)(10) does not form the helix. To clarify the role of the hydroxyl group of Pro residues to play in the stabilization mechanism of the collagen triple helix, we synthesized and crystallized a model peptide (Pro-Hyp-Gly)(4) -(hyp-Pro-Gly)(2) -(Pro-Hyp-Gly)(4) and analyzed its structure by X-ray crystallography and CD spectroscopy. In the crystal, the main-chain of this peptide forms a typical collagen like triple helix. The majority of hyp residues take down pucker with exceptionally shallow angles probably to relieve steric hindrance, but the remainders protrude the hydroxyl group toward solvent with the less favorable up pucker to fit in a triple helix. There is no indication of the existence of an intra-molecular hydrogen bond between the hydroxyl moiety and the carbonyl oxygen of hyp supposed to destabilize the triple helix. We also compared the conformational energies of up and down packers of the pyrrolidine ring in Ac-hyp-NMe(2) by quantum mechanical calculations.     

Osteogenesis imperfecta missense mutations in collagen: structural consequences of a glycine to alanine replacement at a highly charged site

Glycine is required as every third residue in the collagen triple helix, and a missense mutation leading to the replacement of even one Gly in the repeating (Gly-Xaa-Yaa)(n) sequence with a larger residue leads to a pathological condition. Gly to Ala missense mutations are highly underrepresented in osteogenesis imperfecta (OI) and other collagen diseases, suggesting that the smallest replacement residue, Ala, might cause the least structural perturbation and mildest clinical consequences. The relatively small number of Gly to Ala mutation sites that do lead to OI must have some unusual features, such as greater structural disruption because of local sequence environment or location at a biologically important site. Here, peptides are used to model a severe OI case in which a Gly to Ala mutation is found within a highly stabilizing Lys-Gly-Asp sequence environment. Nuclear magnetic resonance, circular dichroism, and differential scanning calorimetry studies indicate this Gly to Ala replacement leads to a substantial loss of triple-helix stability and nonequivalence of the Ala residues in the three chains such that only one of the three Ala residues is capable of forming a good backbone hydrogen bond. Examination of reported OI Gly to Ala mutations suggests their preferential location at known collagen binding sites, and we propose that structural defects caused by Ala replacements may lead to pathology when they interfere with interactions.     

Identification of an intermediate state in the helix-coil degradation of collagen by ultraviolet light

Differential scanning calorimetry has revealed the presence of a new denaturation endotherm at 32 degrees C following UV irradiation of collagen, compared with 39 degrees C for the native triple helix. Kinetic analyses showed that the new peak was a previously unknown intermediate state in the collagen helix-coil transition induced by UV light, and at least 80% of the total collagen was transformed to random chains via this state. Its rate of formation was increased by hydrogen peroxide and inhibited by free radical scavengers. SDS-polyacrylamide gels showed evidence of competing reactions of cross-linking and random primary chain scission. The cross-linking was evident from initial gelling of the collagen solution, but there was no evidence for a dityrosine cross-link. Primary chain scission was confirmed by end group analysis using fluorescamine. Electron microscopy showed that the segment long spacing crystallites formed from the intermediate state were identical to the native molecules. Clearly, collagen can undergo quite extensive damage by cleavage of peptide bonds without disorganizing the triple helical structure. This leads to the formation of a damaged intermediate state prior to degradation of the molecules to short random chains.     

A statistically derived parameterization for the collagen triple-helix

The triple-helix is a unique secondary structural motif found primarily within the collagens. In collagen, it is a homo- or hetero-tripeptide with a repeating primary sequence of (Gly-X-Y)(n), displaying characteristic peptide backbone dihedral angles. Studies of bulk collagen fibrils indicate that the triple-helix must be a highly repetitive secondary structure, with very specific constraints. Primary sequence analysis shows that most collagen molecules are primarily triple-helical; however, no high-resolution structure of any entire protein is yet available. Given the drastic morphological differences in self-assembled collagen structures with subtle changes in assembly conditions, a detailed knowledge of the relative locations of charged and sterically bulky residues in collagen is desirable. Its repetitive primary sequence and highly conserved secondary structure make collagen, and the triple-helix in general, an ideal candidate for a general parameterization for prediction of residue locations and for the use of a helical wheel in the prediction of residue orientation. Herein, a statistical analysis of the currently available high-resolution X-ray crystal structures of model triple-helical peptides is performed to produce an experimentally based parameter set for predicting peptide backbone and C(beta) atom locations for the triple-helix. Unlike existing homology models, this allows easy prediction of an entire triple-helix structure based on all existing high-resolution triple-helix structures, rather than only on a single structure or on idealized parameters. Furthermore, regional differences based on the helical propensity of residues may be readily incorporated. The parameter set is validated in terms of the predicted bond lengths, backbone dihedral angles, and interchain hydrogen bonding.     

Different effects of 4-hydroxyproline and 4-fluoroproline on the stability of collagen triple helix

Differential scanning calorimetry (DSC) analyses of a series of collagen model peptides suggest that 4-hydroxyproline (Hyp) and 4-fluoroproline (fPro) have different effects on the stability of the collagen triple helices according to the sequence of amino acids and stereochemistry at the 4 positions of these imino acids. The thermodynamic parameters indicate that the enhanced stabilities are classified into two different types: the enthalpy term is primarily responsible for the enhanced stability of the triple helix of (Pro-Hyp(R)-Gly)(10), whereas the entropy term dominates the enhanced stability of (Pro-fPro(R)-Gly)(10). The difference between the molecular volumes observed in solution and intrinsic molecular volumes calculated from the crystal structure indicates the different hydration states of these peptides. (Pro-Hyp(R)-Gly)(10) is highly hydrated compared to (Pro-Pro-Gly)(10), which contributes to the larger enthalpy. In contrast, the volume of (Pro-fPro(R)-Gly)(10) shows a smaller degree of hydration than that of (Pro-Pro-Gly)(10). The entropic cost of forming the triple helix of the fPro-containing peptides is compensated by a decrease in an ordered structure of water molecules surrounding the peptide molecule, although the contribution of enthalpy originating from the hydration is reduced. These arguments about the different contribution of entropic and enthalpic terms were successfully applied to interpret the stability of the triple helix of (fPro(S)-Pro-Gly)(10) as well.     

Folding delay and structural perturbations caused by type IV collagen natural interruptions and nearby Gly missense mutations

The standard collagen triple helix requires Gly as every third residue in the amino acid sequence, yet all nonfibrillar collagens contain sites where this repeating pattern is interrupted. To explore the effects of such natural interruptions on the triple helix, a 4- or 15-residue sequence from human basement membrane type IV collagen was introduced between (Gly-Xaa-Yaa)(n) domains within a recombinant bacterial collagen. The interruptions had little effect on melting temperature, consistent with the high thermal stability reported for nonfibrillar collagens. Although the 4-residue interruption cannot be accommodated within a standard triple helix, trypsin and thermolysin resistance indicated a tightly packed structure. Central residues of the 15-residue interruption were protease-susceptible, whereas residues near the (Gly-Xaa-Yaa)(n) boundary were resistant, supporting a transition from an alternate conformation to a well packed triple helix. Both interruptions led to a delay in triple-helix folding, with the 15-residue interruption causing slower folding than the 4-residue interruption. These results suggest that propagation through interruptions represents a slow folding step. To clarify the relation between natural interruptions and pathological mutations, a Gly to Ser missense mutation was placed three triplets away from the 4-residue interruption. As a result of this mutation, the 4-residue interruption and nearby triple helix became susceptible to protease digestion, and an additional folding delay was observed. Because Gly missense mutations that cause disease are often located near natural interruptions, structural and folding perturbations arising from such proximity could be a factor in collagen genetic diseases.     

Thermal denaturation of UV-irradiated wet rat tail tendon collagen

The thermal helix-coil transition of UV irradiated collagen in rat tail tendon has been investigated by differential scanning calorimetry. During UVB irradiation the tendons were immersed in water to keep the collagen fibers in a fully hydrated condition at all times. UV irradiation induced changes in collagen which caused both stabilization and destabilization of the triple helix in fibers. The helix-coil transition for non-irradiated collagen occurred near 64 degrees C, for irradiated 1 and 3 h at 66 and 67 degrees C, respectively. After irradiating for longer times (20-66 h) the helix-coil transition peak occurred at much lower temperatures. The peak was very broad and suggested that collagen was reduced by UV to different polypeptides of different molecular weight and different lower thermal stabilities. It was caused by the disruption of a network of hydrogen-bonded water molecules surrounding the collagen macromolecule.     

Role of carbohydrate in stabilizing the triple-helix in a model for a deep-sea hydrothermal vent worm collagen

The glycopeptide Ac-(Gly-Pro-Thr(beta-Gal))(10)-NH(2) forms a collagen-like triple-helix. A (1)H NMR structural analysis is reported for the peptides Ac-(Gly-Pro-Thr)(n)-NH(2) and Ac-(Gly-Pro-Thr(beta-Gal))(n)-NH(2), where n = 1, 5, and 10. NMR assignments for the individual peptides are made using one- and two-dimensional TOCSY, ROESY, and NOESY experiments. The NMR and corroborating CD data show that Ac-(Gly-Pro-Thr)(n)-NH(2), n = 1, 5, or 10, as well as Ac-(Gly-Pro-Thr(beta-Gal))(n)-NH(2), n = 1 or 5 peptides are unable to form collagen-like triple-helical structures. Furthermore, the equilibrium ratio of cis to trans isomers of the Pro residues is unaffected by the presence of carbohydrate. For Ac-(Gly-Pro-Thr(beta-Gal))(10)-NH(2), the kinetics of amide (1)H exchange with solvent deuterium indicate a slow rate of exchange for both the Gly and the Thr amide. The data are thus consistent with a model in which the carbohydrate stabilizes the triple helix through an occlusion of water molecules and by hydrogen bonding but not through an influence on the cis to trans isomer ratio.     

Characterization by high-resolution crystal structure analysis of a triple-helix region of human collagen type III with potent cell adhesion activity

Collagen is one of the most abundant and important proteins in the human body. Human collagen type III (hCOL3A1) belongs to the fibril-forming collagens and is widely distributed in extensible connective tissue like skin, internal organs, or the vascular system. It plays key roles in wound healing, collagen fibrillogenesis, and normal cardiovascular development in human. The charged residues are considered to be an important characteristic of hCOL3A1, especially for collagen binding and recognition. Here we found that a triple helix fragment of hCOL3A1, Gly489-Gly510, contained multiple charged residues, as well as representative Glu-Lys-Gly and Glu-Arg-Gly charged triplets. We solved the crystal structure of this new fragment to a high-resolution of 1.50?Å and identified some important conformations of this new triple-helix region, including strong hydrogen bonds in interchain and interhelical interactions in addition to obvious flexible bending for the triple helix. We also found that the synthetic collagen peptides around this region exhibited potent activities through integrin-mediated peptide-membrane interaction. We then developed a method to produce a recombinant protein consisting of 16 tandem repeats of the triple-helix fragment of hCOL3A1 with strong activity without cytotoxicity. These results provide a strong base for further functional studies of human collagen type III and the method developed in this study can be applied to produce hCOL3A1-derived proteins or other tandem-repeat proteins with membrane adhesion activity.     

Conformational preferences of substituted prolines in the collagen triple helix

Researchers have recently questioned the role hydroxylated prolines play in stabilizing the collagen triple helix. To address these issues, we have developed new molecular mechanics parameters for the simulation of peptides containing 4(R)-fluoroproline (Flp), 4(R)-hydroxyproline (Hyp), and 4(R)-aminoproline (Amp). Simulations of peptides based on these parameters can be used to determine the components that stabilize hydroxyproline over proline in the triple helix. The dihedrals F-C-C-N, O-C-C-N, and N-C-C-N were built using a N-beta-ethyl amide model. One nanosecond simulations were performed on the trimers [(Pro-Pro-Gly)(10)](3), [(Pro-Hyp-Gly)(10)](3), [(Pro-Amp-Gly)(10)](3), [(Pro-Amp(1+)-Gly)(10)](3), and [(Pro-Flp-Gly)(10)](3) in explicit solvent. The results of our simulations suggest that pyrrolidine ring conformation is mediated by the strength of the gauche effect and classical electrostatic interactions.     

Direct in vitro and in vivo evidence for interaction between Hsp47 protein and collagen triple helix

Hsp47 (heat shock protein 47), a collagen-specific molecular chaperone, is essential for the maturation of various types of procollagens. Previous studies have suggested that Hsp47 may preferentially recognize the triple-helix form of procollagen rather than unfolded procollagen chains in the endoplasmic reticulum. However, the underlying mechanism has remained unclear because of limitations in the available methods for detecting in vitro and in vivo interactions between Hsp47 and collagen. In this study, we established novel methods for this purpose by adopting a time-resolved FRET technique in vitro and a bimolecular fluorescence complementation technique in vivo. Using these methods, we provide direct evidence that Hsp47 binds to collagen triple helices but not to the monomer form in vitro. We also demonstrate that Hsp47 binds a collagen model peptide in the trimer conformation in vivo. Hsp47 did not bind collagen peptides that had been modified to block their ability to form triple helices in vivo. These results conclusively indicate that Hsp47 recognizes the triple-helix form of procollagen in vitro and in vivo.