Relationships between autonomous and integrated forms of tetracycline resistance plasmid in Staphylococcus aureus.

Recombinant plasmids carrying apparently the complete genome of a small staphylococcal plasmid, pT181, or of its temperature-sensitive replication mutant, pSA0301, were isolated and characterized; in these recombinants, pT181 or pSA0301 were considered as “integrated” into the other plasmid, inasmuch as they seem to have a subsidiary role in the replication of the respective recombinant plasmids. Using these recombinants, the incompatibility relationships between integrated and autonomous forms of the same plasmid were studied. The results obtained showed that, although integrated plasmids express their incompatibility toward autonomous ones, they are not susceptible to the incompatibility manifested by an autonomous or another integrated plasmid. No differences were observed between pT181 and pSA0301 in their response to the incompatibility manifested by recombinant plasmids. The expression of the incompatibility of an integrated plasmid did not require the function of the repC gene, involved in plasmid autonomous replication. Moreover, the pT181 repC⁺ gene seems not to be expressed when pT181 is integrated into another plasmid in that the integrated form does not complement autonomous pSA0301 for replication at nonpermissive temperature.     

Compatibility and molecular properties of plasmid Rms 149 in Pseudomonas aeruginosa and Escherichia coli

Two recombinant plasmids have been constructed which code for chloramphenicol resistance but otherwise have properties similar to those of the tetracycline resistance plasmid pT181 and its temperature-sensitive replication (Tsr) mutant pSA0301, respectively, concerning their stability in the host cell and behavior in incompatibility tests. Incompatible heteroplasmid clones have been established using these four plasmids, and their segregation during growth under nonselective conditions has been followed. The results obtained proved the ability of a wild-type plasmid to complement an incompatible Tsr plasmid mutant for its autonomous maintenance at restrictive temperatures. On the other hand, at permissive temperatures, the rate of heteroplasmid segregation was higher for wild-type/wild-type plasmid pairs than for wild-type/Tsr pairs, while at restrictive temperatures the two types of heteroplasmid clones presented similar segregation rates. The possible implications of these results are discussed.     

Staphylococcus aureus chromosomal mutation specifically affecting the copy number of Inc3 plasmids

A chromosomal mutation leading to an important increase in the copy number of plasmid pT181 and its derivatives has been isolated from Staphylococcus aureus strain 8325. The amplification effect in the mutant strain SA1350 was found to be specific for plasmids of the Inc3 group, to which belongs pT181. There are some other differences in the behavior of Inc3 plasmids between SA1350 and 8325, including stable maintenance in SA1350 at high copy number of temperature-sensitive replication mutants at restrictive temperatures, and altered incompatibility properties. Derivatives of SA1350 carrying only Inc3 plasmid mutants with high copy numbers (Cop mutants) could not be obtained, suggesting a lethal runaway plasmid replication in this situation. SA1350 expressed also a temperature-sensitive phenotype. The relationship of this character to the plaC1 mutation determining the amplification of Inc3 plasmids has not yet been elucidated.     

Genetic map of the virulence plasmid of Salmonella enteritidis and nucleotide sequence of its replicons

Partial sequencing of a genomic library of the virulence plasmid of Salmonella enteritidis has been used to localize in the restriction map of this plasmid the genetic loci already described in other Salmonella plasmids. The comparison of the vestigial tra region with the corresponding genes in the F plasmid allowed us to define the extent of the deletions that the S. enteritidis plasmid should have suffered. The putative replicons of the plasmid, repB and repC, were isolated and both proved to be functional in Escherichia coli, but repC was segregationally unstable. The nucleotide sequence of repB showed the typical organization of RepFIIA replicons, although the similarity was lower than usual in this group of replicons. The highest homology was found with the replicon of the virulence plasmid pYVe439-80 from Yersinia enterocolitica (72.5%). Replicon repC also showed a maximum identity of 72.6% with known replicons, namely the RepFIB of pColV-K30 and P307, both virulence plasmids isolated from E. coli. We conclude that the S. enteritidis plasmid could arise from the S. typhimurium plasmid through deletions, and that they are evolutionary distant from other IncFI and IncFII plasmids.     

Plasmid repopulation kinetics in Staphylococcus aureus

We have analyzed the kinetic route by which the indirectly controlled Staphylococcus aureus plasmid, pT181, responds to and corrects fluctuations in copy number. The kinetics of copy number correction from low to steady-state levels (termed repopulation) were determined using two different methods of copy number reduction. Thermosensitive replication (Tsr) mutants of pT181 were grown at nonpermissive temperatures to lower copy number and then shifted to a permissive temperature to allow repopulation. After the downshift, both wild-type and copy mutant plasmids, with active inhibitors, exhibited a burst of exponential replication that resulted in a two- to threefold overshoot of normal steady-state copy numbers. This was followed by inhibition of replication and eventual reestablishment of the steady-state replication rate. Similar replication kinetics were observed when these plasmids were introduced into naive cells by high-frequency transduction. By contrast, a pT181 copy mutant with a nonfunctional inhibitor-target regulation did not overshoot its steady-state copy number, but instead repopulated asymptotically. These results suggest that at low copy numbers, pT181 and its derivatives replicate at near-maximal rates and overshoot prior to the establishment of an inhibitory concentration of repressor. The maximal replication rate is independent of the plasmid's cop genotype. As the copy number increases, inhibitor accumulates and eventually reduces the replication rate. In the absence of an active inhibitor, the steady-state copy number is established at a level that must be limited by some other invariant factor.     

Closely related plasmids from Staphylococcus aureus and soil bacilli

Antibiotic resistance plasmids from staphylococci and soil bacilli have been isolated and compared. A tetracycline resistance (Tc^r) plasmid, indistinguishable from pT181, which is typical of Tc^r plasmids that are widely dispersed among human clinical isolates of S. aureus, has been found also in bovine mastitis isolates. This plasmid, however, shows no detectable homology to a family of related Tc^r plasmids, typified by pBC16, that is widely dispersed among aerobic spore-forming bacilli. However, and rather unexpectedly, pBC16 is highly homologous to and incompatible with pUB110, an S. aureus plasmid specifying kanamycin resistance. The two plasmids are homologous except for the region occupied by their resistance determinants, which has the appearance of a heterologous substitution. These results suggest the occurrence of natural plasmid transfer between staphylococci and soil bacilli.     

Gene encoding a replication initiator protein and replication origin of conjugative plasmid pSA1.1 of Streptomyces cyaneus ATCC 14921

pSA1.1 is a 9.1-kb multicopy plasmid originally isolated from Streptomyces cyaneus (formerly S. azureus) ATCC 14921. This plasmid accumulates single-stranded DNA in S. lividans and is therefore considered to replicate by a rolling-circle replication. In the present work, the rep gene encoding the replication initiator protein and the replication origin ori of pSA1.1 were determined. The rep and ori are located on separate regions. The Rep protein of pSA1.1 belongs to superfamily I which includes A proteins of phages. Nucleotide sequence of the surrounding putative nicking site of pSA1.1 shows good agreement with those of the pC194 group plasmids and phages. The direction of replication was also determined.     

New incompatibility groups for Staphylococcus aureus plasmids

Incompatibility relationships between naturally occurring staphylococcal plasmids conferring erythromycin or kanamycin resistance have been studied making use of recombinants between these plasmids and pSA0301, a temperature-sensitive mutant plasmid determining tetracycline resistance. The four plasmids encoding kanamycin resistance fall in two incompatibility groups; similarly, the three plasmids responsible for erythromycin resistance belong to two other incompatibility groups. This brings the number of distinct incompatibility groups reported for Staphylococcus aureus plasmids to 13.     

Complete nucleotide sequence of pT181, a tetracycline-resistance plasmid from Staphylococcus aureus

pT181 is a naturally occurring Staphylococcus aureus plasmid, encoding inducible resistance to tetracycline. The plasmid has a copy number of about 20 per cell, and belongs to the incompatibility group inc3. The complete nucleotide sequence of pT181 has been determined and consists of 4437 bp. The nucleotide sequence contains 69.8% A-T and 30.2% G-C pairs. pT181 was found to contain four open reading frames capable of coding for polypeptides containing more than 50 amino acids. All the putative polypeptides are coded by one strand. The molecular weights of the four putative polypeptides are (in daltons): A, 37,500; B, 35,000; C, 23,000, and D, 18,000. Polypeptide A corresponds to the repC protein, earlier shown to be specifically required for pT181 replication. Polypeptide B (and possibly polypeptide D) are involved in tetracycline resistance. No role has yet been established for polypeptide C; deletion of the coding sequence for the C polypeptide has no detectable effect on any property of the pT181 plasmid. A region consisting of about 1200 bp contains information for the replication and copy number control of this plasmid. The sequencing results are discussed in relation to the replication properties and tetracycline resistance associated with the pT181 plasmid.     

Staphylococcus aureus chromosomal mutations that decrease efficiency of Rep utilization in replication of pT181 and related plasmids.

Staphylococcus aureus chromosomal mutants which maintain pT181 and related plasmids at a much reduced copy number but which do not affect the replication of other plasmids have been isolated. The origin of replication and the initiator protein of the affected plasmids are the only elements required for the response to these mutations. The host mutations do not interfere with the pT181 replication control mechanism.     

Two novel families of plasmids from hyperthermophilic archaea encoding new families of replication proteins

Thermococcales (phylum Euryarchaeota) are model organisms for physiological and molecular studies of hyperthermophiles. Here we describe three new plasmids from Thermococcales that could provide new tools and model systems for genetic and molecular studies in Archaea. The plasmids pTN2 from Thermococcus nautilus sp. 30-1 and pP12-1 from Pyrococcus sp. 12-1 belong to the same family. They have similar size (∼12 kb) and share six genes, including homologues of genes encoded by the virus PAV1 from Pyrococcus abyssi. The plasmid pT26-2 from Thermococcus sp. 26-2 (21.5 kb), that corresponds to another plasmid family, encodes many proteins having homologues in virus-like elements integrated in several genomes of Thermococcales and Methanococcales. Our analyses confirm that viruses and plasmids are evolutionary related and co-evolve with their hosts. Whereas all plasmids previously isolated from Thermococcales replicate by the rolling circle mechanism, the three plasmids described here probably replicate by the theta mechanism. The plasmids pTN2 and pP12-1 encode a putative helicase of the SFI superfamily and a new family of DNA polymerase, whose activity was demonstrated in vitro, whereas pT26-2 encodes a putative new type of helicase. This strengthens the idea that plasmids and viruses are a reservoir of novel protein families involved in DNA replication.     

Control of pT181 replication I. The pT181 copy control function acts by inhibiting the synthesis of a replication protein

pT181 is a fully sequenced 4.4-kb 20 copy Tcr plasmid from Staphylococcus aureus. Its replication system involves a unique unidirectional origin embedded in the coding sequence for a plasmid-determined protein, RepC, that is required for initiation. When joined to a 55 copy carrier plasmid, pE194, pT181 excludes autonomous isologous replicons by inhibiting their replication. Two types of spontaneous pT181 copy mutants have been isolated, one that eliminates sensitivity to this inhibition and another that does not. A spontaneous 180-bp deletion, delta 144, eliminates both the inhibitory activity and sensitivity to it. This deletion increases copy number by 50-fold and RepC production by at least 10-fold. It is located directly upstream from the repC coding sequence and the deletion-bearing plasmid supports the replication of inhibitor-sensitive plasmids in cells containing active inhibitor. This effect is probably due to the overproduction of RepC by the delta 144 plasmid. On the basis of these results, it is suggested that RepC synthesis is negatively controlled by an inhibitor that is encoded directly upstream from the repC coding sequence and acts as a tareget set in the same region. It is likely, therefore, that pT181 replication rate is determined by the level of RepC.     

Effect of the deletion of a fragment dispensable for the autonomous maintenance of plasmid pT181 on the competition between incompatible plasmids

The deletion of the 560-bp HindIII C fragment from pT181 derivatives does not change the stability or copy number of the plasmid but affects its ability to compete with undeleted, incompatible plasmids for maintenance in the host cell. The disadvantage of the deleted plasmids seems to be manifested at the level of replication. It results that for plasmid pT181 a sequence dispensable for autonomous maintenance and replication control could affect the outcome of the competition between autonomous, incompatible plasmids.     

Isolation and complementation of temperature-sensitive replication mutants of Staphylococcus aureus plasmid pC194

Temperature-sensitive replication (Tsr) mutants have been isolated from the Staphylococcus aureus plasmid pC194. For three of the four mutant plasmids tested (pSAO801, pSAO802, and pSAO804) the segregation kinetics suggested a complete block of plasmid replication at 43 degrees C. The replication defects of three mutant plasmids: pSAO802, pSAO803, and pSAO804 could be complemented by recombinant plasmids carrying a segment from either the wild type or the other mutant, pSAO801. There was no complementation when the segment carried by the recombinant plasmid was derived from one of the three complementable mutants. These data were taken as evidence for the involvement of a diffusible, plasmid-encoded product, RepH, in pC194 replication. The complementation of the fourth Tsr mutant, pSAO801, could not be tested due to an abnormal susceptibility of this mutant to the incompatibility expressed by recombinants carrying segments derived from pC194 or its mutants. A single mutation was found to be responsible for both pSAO801 instability and its altered incompatibility properties but the nature of the defect has not yet been elucidated.     

Growth and Survival of Genetically Manipulated Lactobacillus plantarum in Silage

The growth and persistence of two genetically manipulated forms of Lactobacillus plantarum NCDO (National Collection of Dairy Organisms) 1193 have been monitored in grass silage. Both recombinants contained pSA3, a shuttle vector for gram-positive organisms that encodes erythromycin resistance. In one of the recombinants, pSA3 was integrated onto the chromosome, whereas in the other, a pSA3 derivative designated pM25, which contains a Clostridium thermocellum cellulase gene cloned into pSA3, was maintained as an extrachromosomal element. This extrachromosomal element is a plasmid. Rifampin-resistant mutants were selected for the recombinants and the parent strain. When applied to minisilos at a rate of 10⁶ CFU/g of grass, both the recombinants and the parent strain proliferated to dominate the epiphytic microflora and induced an increase in the decline in pH compared with that of the noninoculated silos. The presence of extra genetic material did not appear to disadvantage the bacterium in comparison with the parent strain. The selective recovery of both strains by using rifampin and erythromycin was confirmed by Southern hybridization. Interestingly, the free plasmid (pM25) appeared more stable in silage than was expected from studies in MRS broth. The plasmid was retained by 85% of the rifampin-resistant L. plantarum colonies isolated from a day 30 silo. These data answer an important question by showing that genetically manipulated recombinants of L. plantarum can proliferate and compete with epiphytic lactic acid bacteria in silage.     

Bacillus anthracis and Bacillus cereus PcrA helicases can support DNA unwinding and in vitro rolling-circle replication of plasmid pT181 of Staphylococcus aureus

Replication of rolling-circle replicating (RCR) plasmids in gram-positive bacteria requires the unwinding of initiator protein-nicked plasmid DNA by the PcrA helicase. In this report, we demonstrate that heterologous PcrA helicases from Bacillus anthracis and Bacillus cereus are capable of unwinding Staphylococcus aureus plasmid pT181 from the initiator-generated nick and promoting in vitro replication of the plasmid. These helicases also physically interact with the RepC initiator protein of pT181. The ability of PcrA helicases to unwind noncognate RCR plasmids may contribute to the broad-host-range replication and dissemination of RCR plasmids in gram-positive bacteria.