Biofilm structure and cell vitality in a laboratory model of subgingival plaque

The accumulation of dental plaque below the gingival margin (i.e. subgingival plaque) is responsible for the most prevalent microbe-induced diseases of humans--the periodontal diseases. Access to this plaque is difficult, making studies of its structure in vivo very difficult. We have, therefore, used a constant-depth film fermenter to grow microcosm subgingival dental plaques under conditions similar to those existing in vivo to enable us to study certain aspects of its structure. Confocal laser scanning microscopy revealed that the biofilms consisted of pillar-like stacks of bacteria separated by water channels. In terms of their structure, these microcosm dental plaques reached a pseudo steady-state after 4 days. Individual optical sections generally showed the outer layers of the biofilm stacks to contain a high proportion of nonviable cells surrounding an inner core of predominantly viable cells with "veins" of nonviable bacteria penetrating from the outer layers through into the inner core. Such a structure differs from that classically described for biofilms growing in an aerobic atmosphere where the arrangement of viable and nonviable bacteria is usually reversed. The reasons for the preponderance of nonviable bacteria in the outer layer of the bacterial stacks remain to be established.     

A fluorescence assay to determine the viable biomass of microcosm dental plaque biofilms

Dental plaque bacteria form complex and robust cell aggregates which cannot be counted accurately using epifluorescence microscopy. This causes a significant problem for quantifying their viability. The aim of the investigation was to develop a fluorescence assay to quantify the viable biomass of dental plaque biofilms. Using an artificial mouth system, microcosm plaques were grown under a range of fluoride and mineralizing conditions, and were treated with the oral antiseptics chlorhexidine (CHX) and Listerine. Plaques were harvested, made into suspension and stained in microtitre plates with a di-chromatic fluorescent stain (Live/Dead BacLight). The percentage of viable biomass was calculated from the regression data generated from a viability standard. The standard was constructed using different proportions of viable (green fluorescence) and non-viable (red fluorescence) plaque bacteria, and growth conditions for optimizing green fluorescence were investigated. The results from the assay showed that fluoride at 1000 and 3000 ppm promoted plaque viability by at least 15%, from approximately 45 to 60%, and at 5000 ppm to approximately 87% (P<0.05). Plaques treated with Listerine and CHX from d 0 yielded insufficient biomass to be tested for viability, however 14 d post-treatment, viability was comparable to untreated plaques (approximately 55%, P>0.05). Treatment with Listerine and CHX from d 3 reduced biomass but not viability. Development of this assay enabled viability of plaque bacteria which cannot be resolved with epifluorescence microscopy to be evaluated. It offers a rapid alternative to epifluorescence microscopy and could be applied to nonoral bacteria.     

Determining the spatial distribution of viable and nonviable bacteria in hydrated microcosm dental plaques by viability profiling

AIMS: The aim of this study was to use confocal laser scanning microscopy (CLSM) to examine the spatial distribution of both viable and nonviable bacteria within microcosm dental plaques grown in vitro. Previous in vivo studies have reported upon the distribution of viable bacteria only. METHODS AND RESULTS: Oral biofilms were grown on hydroxyapatite (HA) discs in a constant-depth film fermenter (CDFF) from a saliva inoculum. The biofilms were stained with the BacLight LIVE/DEAD system and examined by CLSM. Fluorescence intensity profiles through the depth of the biofilm showed an offset between the maximum viable intensity and the maximum nonviable intensity. Topographical differences between the surface properties of the viable and nonviable biofilm virtual surfaces were also measured. CONCLUSIONS: The profile of fluorescence intensity from viable and nonviable staining suggested that the upper layers of the biofilm contain proportionally more viable bacteria than the lower regions of the biofilm. SIGNIFICANCE AND IMPACT OF STUDY: Viability profiling records the transition from predominantly viable to nonviable bacteria through biofilms suggesting that this technique may be of use for quantifying the effects of antimicrobial compounds upon biofilms. The distribution of viable bacteria was similar to that found in dental plaque in vivo suggesting that the CDFF produces in vitro biofilms which are comparable to their in vivo counterparts in terms of the spatial distribution of viable bacteria.     

Running economy deteriorates following 60?min of exercise at 80% V˙O2max

Fifteen young adult Singaporean male physical education students maximum oxygen consumption [(V˙O_2max) = 56 (4.7) ml · kg⁻¹ · min⁻¹] performed three prolonged runs in a counterbalanced design. The running bouts varied in time (40 vs 60 min) and intensity (70% vs 80% V˙O_{2 max} ). Each prolonged run was separated by 7 days. The running economy (RE) at 10.8 km · h⁻¹ during 10-min running bouts was measured before (RE1) and after (RE2) each prolonged run. A control study involved monitoring RE at 10.8 km · h⁻¹ before and after 60 min rest. There were no differences between RE1 and RE2 values during the control run. However, there were differences between RE1 and RE2 values when separated by a prolonged run. For example, the mean (SD) changes in oxygen consumption (ml · kg⁻¹ · min⁻¹) values were 38.2 (2.5) versus 40.1 (2.6) (40 min at 80% V˙O_{2 max} ), 38.9 (2.8) versus 41.5 (2.6) (60 min at 70% V˙O_{2 max} ), and 39.0 (3.1) versus 42.7 (2.9) (60 min at 80% V˙O_{2 max} ; P < 0.01). The results of this investigation support the hypothesis that RE deteriorates during prolonged running, and that the magnitude of the deterioration in RE increases with both increasing exercise intensity and duration. Accepted: 14 July 1997     

Beta-endorphin infusion alters pancreatic hormone and glucose levels during exercise in rats

β-Endorphin (BE) infusion at rest can influence insulin and glucagon levels and thus may affect glucose availability during exercise. To clarify the effect of BE on levels of insulin, glucagon and glucose during exercise, 72 untrained male Sprague-Dawley rats were infused i.v. with either: (1) BE (bolus 0.05 mg · kg⁻¹ +0.05 mg · kg⁻¹ · h⁻¹, n = 24); (2) naloxone (N, bolus 0.8 mg · kg⁻¹ + 0.4 mg · kg⁻¹, n = 24); or (3) volume-matched saline (S, n = 24). Six rats from each group were killed after 0, 60, 90 or 120 min of running at 22 m · min⁻¹, at 0% gradient. BE infusion resulted in higher plasma glucose levels at 60 min [5.93 (0.32) mM] and 90 min [4.16 (0.29) mM] of exercise compared to S [4.62 (0.27) and 3.41 (0.26 mM] and N [4.97 (0.38) and 3.44 (0.25) mM]. Insulin levels decreased to a greater extent with BE [21.5 (0.9) and 18.3 (0.6) uIU · ml⁻¹] at 60 and 90 min compared to S [24.5 (0.5) and 20.6 (0.6) uIU · ml⁻¹] and N [24.5 (0.4) and 21.6 (0.7) uIU · ml⁻¹] groups. Plasma C-peptide declined to a greater extent at 60 and 90 min of exercise with BE infusion compared to both S and N. BE infusion increased glucagon at all times during exercise compared to S and N. These data suggest that BE infusion during exercise influences plasma glucose by augmenting glucagon levels and attenuating insulin release. Accepted: 26 February 1997     

The effect of molybdenum on biofilm development

Little is known about the formation and effects of biofilms on stainless steel pipes in freshwater environments, particularly as they are considered as a direct replacement for copper pipes for ‘problem’ water. There is some cause for concern especially as stainless steel cannot claim the inherent biocidal potential of copper. As molybdenum is known to be leached out of stainless steel grade 316, in very small amounts, a study was set up to see if molybdenum could retard the development of biofilms. When a comparison of biofilm viable and total cell counts was made between pure molybdenum metal and stainless steel grade 304, it was found that cell counts were significantly higher (P < 0.05) on grade 304 stainless steel after 5 weeks exposure to flowing water (0.64 m s⁻¹). Molybdenum (above a concentration of 1 g L⁻¹) affected the growth rate of Acinetobacter sp, a pioneering bacterium of biofilms in potable water. Received 18 February 1998/ Accepted in revised form 17 May 1999     

An in vitro study of the effect of fluoridated milk on oral bacterial biofilms

Microcosmic dental plaques were grown in artificial saliva and supplemented with either milk or fluoridated milk. The presence of fluoride in the milk increased the pH of the biofilms and reduced the proportions of streptococci, demonstrating that in this model, fluoridation of milk produces biofilms with reduced cariogenic potential.     

The influence of either no fluid or carbohydrate-electrolyte fluid ingestion and the environment (thermoneutral versus hot and humid) on running economy after prolonged, high-intensity exercise

This study investigated the effects on running economy (RE) of ingesting either no fluid or an electrolyte solution with or without 6% carbohydrate (counterbalanced design) during 60-min running bouts at 80% maximal oxygen consumption (V˙O_2max). Tests were undertaken in either a thermoneutral (22–23°C; 56–62% relative humidity, RH) or a hot and humid natural environment (Singapore: 25–35°C; 66–77% RH). The subjects were 15 young adult male Singaporeans [V˙O_2max = 55.5 (4.4 SD) ml kg⁻¹ min⁻¹]. The RE was measured at 3 m s⁻¹ [65 (6)% V˙O_2max] before (RE1) and after each prolonged run (RE2). Fluids were administered every 2 min, at an individual rate determined from prior tests, to maintain body mass (group mean = 17.4 ml min⁻¹). The V˙O₂ during RE2 was higher (P < 0.05) than that during the RE1 test for all treatments, with no differences between treatments (ANOVA). The mean increase in V˙O₂ from RE1 to RE2 ranged from 3.4 to 4.7 ml kg⁻¹ min⁻¹ across treatments. In conclusion, the deterioration in RE at 3 m s⁻¹ (65% V˙O_2max) after 60 min of running at 80% V˙O_2max appears to occur independently of whether fluid is ingested and regardless of whether the fluid contains carbohydrates or electrolytes, in both a thermoneutral and in a hot, humid environment. Accepted: 30 October 1997     

The effect of turbulent flow and surface roughness on biofilm formation in drinking water

There is considerable interest in both Europe and the USA in the effects of microbiological fouling on stainless steels in potable water. However, little is known about the formation and effects of biofilms, on stainless steel in potable water environments, particularly in turbulent flow regimes. Results are presented on the development of biofilms on stainless steel grades 304 and 316 after exposure to potable water at velocities of 0.32, 0.96 and 1.75 m s⁻¹. Cell counts on slides of stainless steel grades 304 and 316 with both 2B (smooth) and 2D (rough) finishes showed viable and total cell counts were higher at the higher flow rates of 0.96 and 1.75 m s⁻¹, compared to a flow rate of 0.32 m s⁻¹. Extracellular polysaccharide levels were not significantly different (P< 0.05) between each flow rate on all stainless steel surfaces studied. higher levels were found at the higher water velocities. the biofilm attached to stainless steel was comprised of a mixed bacterial flora including Acinetobacter sp, Pseudomonas spp, Methylobacterium sp, and Corynebacterium/Arthrobacter spp. Epifluorescence microscopy provided evidence of rod-shaped bacteria and the formation of stands, possibly of extracellular material attached to stainless steel at high flow rates but not at low flow rates. Received 04 February 1998/ Accepted in revised form 12 February 1999     

Effects of marine paints on microbial biofilm development on three materials

The development of biofilms of Pseudomonas aeruginosa PAO-1 was studied using modified Robbins devices. Biofilm development was measured using viable counts, acridine orange direct counts (AODC), and a colorimetric method for exopolysaccharide (EPS). Biofilms reached their maximum population 24–72 h after inoculation on coupons with no paint or on coupons coated with marine paint VC-18 without additives. Biofilms on stainless steel contained higher numbers of total cells and of viable cells than biofilms on fiberglass or aluminum. Coating the surfaces with marine paint VC-18 resulted in decreased numbers of cells on stainless steel but had little effect on numbers of cells on fiberglass or aluminum. Addition to the paint of Cu or tributyltin (TBT), the active components in two types of antifouling paints, inhibited the initial development of biofilms. However, by 72–96 h, most biofilms contained the same number of cells as surfaces without additives as shown by both viable counts and AODC. Biofilms that formed on surfaces coated with Cu- or TBT-containing paint did not synthesize more EPS, suggesting that P. aeruginosa PAO-1 does not respond to these compounds by synthesizing more EPS, which could bind the metal and protect the cells. Rather, these biofilms may contain Cu- or TBT-resistant cells. TBT-resistant cells made up 1–10% of the viable counts in biofilms on uncoated stainless steel, but in biofilms on stainless steel coated with marine paint containing TBT, TBT-resistant cells made up as much as 50% of the population. For non-coated stainless steel surfaces, Cu-resistant cells initially made up the majority of the population, but after 48 h they made up less than 1% of the population. On Cu-coated stainless steel, Cu-resistant cells predominated through 48 h, but after 48 h they comprised less than 10% of the population. These results suggest that the growth of TBT-resistant and Cu-resistant cells contributes to biofilms of P. aeruginosa PAO-1 at early stages of development but not at later stages. Received 16 December 1997/ Accepted in revised form 9 March 1998     

Rapid atrazine mineralisation in soil slurry and moist soil by inoculation of an atrazine-degrading Pseudomonas sp. strain

The evaluation of pesticide-mineralising microorganisms to clean-up contaminated soils was studied with the widely applied and easily detectable compound atrazine, which is rapidly mineralised by several microorganisms including the Pseudomonas sp. strain Yaya 6. The rate of atrazine removal was proportional to the water content of the soil and the amount of bacteria added to the soil. In soil slurry, 6 mg atrazine kg soil⁻¹ was eliminated within 1 day after application of 0.3 g dry weight inoculant biomass kg soil⁻¹ and within 5 days when 0.003 g kg soil⁻¹ was used. In partially saturated soil (60% of the maximal water-holding capacity) 15 mg atrazine kg soil⁻¹ was eliminated within 2 days by 1 g biomass kg soil⁻¹ and within 25 days when 0.01 g biomass kg soil⁻¹ was used. In unsaturated soil, about 60% [U-ring-¹⁴C]atrazine was converted to ¹⁴CO₂ within 14 days. Atrazine was very efficiently removed by the inoculant biomass, not only in soil that was freshly contaminated but also in soil aged with atrazine for up to 260 days. The bacteria exposed to atrazine in unsaturated sterile soil were still active after a starvation period of 240 days: 15 mg newly added atrazine kg soil⁻¹ was eliminated within 5 days. Received: 31 October 1997 / Received revision: 16 January 1998 / Accepted: 18 January 1998     

Comparisons of serum testosterone and corticosterone between exercise training during normoxia and hypobaric hypoxia in rats

The purpose of this study was to compare the effects of continuous and intermittent exercise training on serum testosterone [T] and corticosterone concentrations [Cort] during normoxia and hypobaric hypoxia. Male rats swam with loads of 3% (normoxia) or 2.25% (462 mmHg) body mass for 60 min in the continuous training groups, and 15 min separated by a 7-min rest  × 4, with 60-min total exercise duration in the intermittent training groups, 5␣days · week⁻¹ for 6 weeks. Serum [T] were measured at␣rest and following exercise after 6 weeks of training. Serum [Cort] were measured immediately after an acute period of exercise or after 6 weeks of training at rest and following exercise. Continuous exercise induced decreases in [T] under both conditions. Intermittent exercise showed a tendency to increase [T] during normoxia, but caused a suppression during hypobaric hypoxia. The [Cort] was elevated by a similar margin after an acute period of exercise during both conditions. After 6 weeks of training, however, [Cort] increased slightly after exercise during normoxia. A lower resting [Cort], which was increased after exercise, was found in the training groups during hypoxia. No relevant relationship was found between the behaviours of [T] and [Cort] after exercise during either conditions. Accepted: 20 April 1998     

The Impact of heat exposure and repeated exercise on circulating stress hormones

To determine if heat exposure alters the hormonal responses to moderate, repeated exercise, 11 healthy male subjects [age = 27.1 (3.0) years; maximal oxygen consumption, V˙O_2max = 47.6 (6.2) ml · kg · min⁻¹; mean (SD)] were assigned to four different experimental conditions according to a randomized-block design. While in a thermoneutral (23°C) or heated (40°C, 30% relative humidity) climatic chamber, subjects performed either cycle ergometer exercise (two 30-min bouts at ≈50% V˙O_2max, separated by a 45-min recovery interval, CEx and HEx conditions), or remained seated for 3 h (CS and HS conditions). Blood samples were analyzed for various exercise stress hormones [epinephrine (E), norepinephrine (NE), dopamine, cortisol and human growth hormone (hGH)]. Passive heating did not alter the concentrations of any of these hormones significantly. During both environmental conditions, exercise induced significant (P < 0.001) elevations in plasma E, NE and hGH levels. At 23°C during bout 1: E = 393 (199) pmol · l⁻¹ (CEx) vs 174 (85) pmol · l⁻¹ (CS), NE = 4593 (2640) pmol · l⁻¹ (CEx) vs 1548 (505) pmol · l⁻¹ (CS), and hGH = 274 (340) pmol · l⁻¹ (CEx)vs 64 (112) pmol · l⁻¹ (CS). At 40°C, bout 1: E = 596 (346) pmol · l⁻¹ (HEx) vs 323 (181) pmol · l⁻¹ (HS), NE = 7789 (5129) pmol · l⁻¹ (HEx) vs 1527 (605) pmol · l⁻¹ (HS), and hGH = 453 (494) pmol · l⁻¹ (HEx) vs 172 (355) pmol · l⁻¹ (HS). However, concentrations of plasma cortisol were increased only in response to exercise in the heat [HEx = 364 (168) nmol · l⁻¹ vs HS = 295 (114) nmol · l⁻¹). Compared to exercise at room temperature, plasma levels of E, NE and cortisol were all higher during exercise in the heat (P < 0.001 in all cases). The repetition of exercise did not significantly alter the pattern of change in cortisol or hGH levels in either environmental condition. However, repetition of exercise in the heat increased circulatory and psychological stress, with significantly (P < 0.001) higher plasma concentrations of E and NE. These results indicate a differential response of the various stress hormones to heat exposure and repeated moderate exercise. Accepted: 16 April 1997     

The relationship between plasma potassium concentration and muscle torque during recovery following intense exercise

The present study investigated the relationship between plasma potassium ion concentration ([K⁺]) and skeletal muscle torque during three different 15-min recovery periods after fatigue induced by four 30-s sprints. Four males and one female completed the multiple sprint exercise on three separate days; recovery was passive, i.e. no cycling exercise (PRec), active cycling at 30% peak oxygen consumption O_2peak (30% Rec) and active cycling at 60% O_2peak (60% Rec). Plasma [K⁺] was measured from blood sampled from an antecubital vein of subjects at rest and at 0, 3, 5, 10 and 15 min into each recovery. Isokinetic leg strength was measured at rest and at 1, 6, 11 and 16 min during each recovery. Following the exhaustive sprints, [K⁺] increased significantly from an average mean (SEM) resting value of 3.81 (0.07) mmol · l⁻¹ to 4.48 (0.19) mmol · l⁻¹ (P < 0.01). In all recovery conditions, plasma [K⁺] returned to resting levels within 3 min following the fourth sprint. However, in the two active recovery conditions plasma [K⁺] increased over the remainder of the recovery periods to 4.36 (0.12) mmol · l⁻¹ in the 30% Rec condition and 4.62 (0.12) mmol · l⁻¹ in the 60% Rec condition, the latter being significantly higher than the former (P < 0.01). The maximum torque measured following the sprints decreased significantly, on average, to 61.1 (8.36)% of peak levels (P < 0.01). After 15 min of recovery, maximum torque was highest in the 30% Rec condition at 92.13 (3.06)% of peak levels (P < 0.01), compared to 85.23 (3.64)% and 85.71 (0.82)% for the PRec and 60% Rec conditions, respectively. In contrast to the significant differences in plasma [K⁺] across all three recovery conditions, muscle torque recovery was significantly different in only the 30% Rec condition. In summary, recovery of peak levels of muscle torque following fatiguing exercise does not appear to follow changes in plasma [K⁺]. Accepted: 18 October 1996     

Production of β-galactosidase from thermophilic fungus Rhizomucor sp

A thermostable β-galactosidase was produced extracellularly by a thermophilic Rhizomucor sp, with maximum enzyme activity (0.21 U mg⁻¹) after 4 days under submerged fermentation condition (SmF). Solid state fermentation (SSF) resulted in a nine-fold increase in enzyme activity (2.04 U mg⁻¹). The temperature range for production of the enzyme was 38–55°C with maximum activity at 45°C. The optimum pH and temperature for the partially purified enzyme was 4.5 and 60°C, respectively. The enzyme retained its original activity on incubation at 60°C up to 1 h. Divalent cations like Co²⁺, Mn²⁺, Fe²⁺ and Zn²⁺ had strong inhibitory effects on the enzyme activity. The K _m and V _max for p-nitrophenyl-β- _D-galactopyranoside and o-nitrophenyl-β - _D-galactopyranoside were 0.39 mM, 0.785 mM and 232.1 mmol min⁻¹ mg⁻¹ respectively. The K _m and V _max for the natural substrate lactose were 66.66 μM and 0.20 μ mol min⁻¹ mg⁻¹. Received 10 March 1997/ Accepted in revised form 17 July 1997     

Inhibition of methane production from whey by heavy metals – protective effect of sulfide

A whey solution was used as a substrate for methane production in an anaerobic fixed-bed reactor. At a hydraulic retention time of 10 days, equivalent to a space loading of 3.3 kg (m³day)⁻¹, 90% of the chemical oxygen demand was converted to biogas. Only a little propionate remained in the effluent. Toxicity tests with either copper chloride, zinc chloride or nickel chloride were performed on effluent from the reactor. Fifty per cent inhibition of methanogenesis was observed in the presence of ≥10 mg CuCl₂ l⁻¹≥40 mg ZnCl₂ l⁻¹ and ≥60 mg NiCl₂ l⁻¹, respectively. After exposure to Cu²⁺, Zn²⁺ or Ni²⁺ ions for 12 days, complete recovery of methanogenesis by equimolar sulfide addition was possible upon prolonged incubation. Recovery failed, however, for copper chloride concentrations ≥40 mg l⁻¹. If the sulfide was added simultaneously with the three heavy metal salts, methanogenesis was only slightly retarded and the same amount of methane as in non-inhibited controls was reached either 1 day (40 mg ZnCl₂ l⁻¹) or 2 days later (10 mg CuCl₂ l⁻¹). Up to 60 mg NiCl₂ l⁻¹ had no effect if sulfide was present. Sulfide presumably precipitated the heavy metals as metal sulfides and by this means prevented heavy metal toxicity. Received: 8 October 1999 / Received revision: 3 January 2000 / Accepted: 4 January 2000     

Microorganism inactivation using high-pressure generation in sealed vessels under sub-zero temperature

In order to test the possibility of utilizing high pressure in bioscience and biotechnology, a simple method for high-pressure generation and its use for microbial inactivation have been studied. When a pressure vessel was filled with water, sealed tightly and cooled to sub-zero temperatures, high pressure was generated in the vessel. The pressure generation was 60 MPa at −5 °C, 103 MPa at −10 °C, and 140 MPa at −15 °C, −20 °C, and −22 °C. The high pressure generated inactivated microorganisms effectively: yeasts (Saccharomyces cerevisiae and Zygosaccharomyces rouxii), bacteria (Lactobacillus brevis and Eschericia coli), and fungi (Aspergillus niger and Aspergillus oryzae) were completely inactivated when stored in sealed vessels −20 °C for 24 h. However, Staphylococcus aureus was only partly inactivated under the same conditions. This method opens up a new application of high pressure for storing, transporting, and sterilizing of foods and biological materials. Received: 28 July 1997 / Received last revision: 12 June 1998 / Accepted: 19 June 1998     

Effects of repeated exercise/rest sessions at –10°C on skin and rectal temperatures in men wearing chemical protective clothing

The development of thermophysiological responses during four consecutive exercise/rest sessions in the cold was studied in men wearing chemical protective clothing and a face mask. Six men repeated four exercise/rest sessions during 8 h at –10°C. Each session consisted of step exercise (240 W · m⁻²) for 60 min and rest for another 60 min. Rectal and skin temperatures were measured continuously and thermal sensations were obtained at 30-min intervals. Entering the cold from a warm environment and the onset of exercise resulted in a decrease in skin temperatures during the first session and the decrement in the temperatures of the extremities continued for 10–20 min during the following period of exercise. Torso skin temperature was at its lowest during the first rest period. After the first session of cold exposure the range and the level of variation in mean body temperature (Tˉ _b) followed a pattern which was repeated until the end of the experiment. However, the torso skin temperatures increased gradually until the fourth session, while the temperatures of the extremities, in contrast, tended to decrease up to the third session. In conclusion, the present results indicated that although Tˉ _b, reflecting the whole body heat balance, showed a typical pattern of change after the first session (2 h), the torso area was warming until the end of the cold exposure while the extremities continued to cool down up to the third session (6 h), obviously due to a prolonged redistribution of the circulation. Accepted: 29 May 1998     

Ontogeny of deep-body cold sensitivity in Pekin ducklings Anas platyrhynchos

The ontogeny of deep-body cold sensitivity was studied in 1 to 12 days old Pekin ducklings Anas platyrhynchos. Deep-body cold sensitivity was determined by means of thermodes implanted in the abdominal cavity. The thermodes were perfused with cold water for 15-min periods to lower the core temperature. Cooling of the body core elicited increases in metabolic rate and vasoconstrictions in the legs of all the ducklings. From the changes induced in metabolic rate and core temperature, deep-body cold sensitivity values of between −5.17 and −6.36 W · kg⁻¹ · °C⁻¹, were estimated. These values, which are in the range of those reported previously for adult Pekin ducks, did not change with age, and it is concluded that deep-body cold sensitivity is fully developed at hatching. Our next aim was to investigate whether the autonomic responses elicited by exposure of ducklings to cold ambient conditions could be explained by temperature changes within the body core. During cold exposure, the increase in metabolic rate was not accompanied by a concomitant decrease in core temperature. On the contrary, deep-body temperature increased slightly during the initial phase of cold exposure. The ducklings attained a metabolic rate amounting to 85–90% of their peak metabolic rate before the core temperature fell below the regulated level measured at thermoneutrality. Thus, despite the findings that Pekin ducklings have a highly-developed deep-body cold sensitivity, their metabolic cold defence under natural conditions seems to be mediated primarily by peripheral thermoreceptors. Accepted: 7 January 1997     

High rates of microbial sulphate reduction in a mesophilic ethanol-fed expanded-granular-sludge-blanket reactor

In a mesophilic (30–35 °C), sulphidogenic, ethanol-fed expanded-granular-sludge-blanket reactor, sulphate, at loading rates of up to 10.0–12.0 g Sl⁻¹␣day⁻¹, was removed with an average efficiency of more than 80%. The pH was between 7.7 and 8.3 and the maximal total dissolved sulphide concentration was up to 20 mM S (650 mg S/l). The alkaline pH was maintained by either a pH-control unit with sodium hydroxide or by stripping part of the sulphide and CO₂ from the recycle with nitrogen gas. The superficial upstream liquid velocity (v _up) was 3.0–4.5 m/h. The ratio of ethanol to sulphur was near stoichiometry. At alkaline pH, the activity of the acetotrophic sulphate-reducing bacteria, growing on acetate, was strongly enhanced, whereas at pH below 7.7 the acetotrophic sulphate-reducing bacteria were inhibited by aqueous H₂S. With regard to the removal efficiency and operational stability, external stripping with N₂ and pH control were equally successful. Received: 2 December 1996 / Received revision: 13 March 1997 / Accepted: 15 March 1997