Resonance energy transfer in cells: a new look at fixation effect and receptor aggregation on cell membrane

Fluorescence resonance energy transfer (FRET) measurements offer a reliable and noninvasive approach to studying protein and lipid colocalization in cells. We have considered systems in which FRET occurs as intramolecular and/or intermolecular process. The proposed dynamic FRET model shows that in the case of intermolecular process the degree of aggregation only slightly affects the energy transfer efficiency. The theory was tested on a set of donor-acceptor pairs in which energy transfer occurs intramolecularly, intermolecularly, or both. The obtained experimental results are in a good agreement with the proposed model. It is well known that the energy transfer efficiency depends both on the distance between the donor and acceptor molecules and the relative orientation of their respective transition dipole moments. This dual dependence often leads to ambiguity. In this article, we show how FRET efficiency can be significantly reduced even in highly coupled system through conformational restrictions in the donor-acceptor pair. Importantly, such restrictions can be imposed on the system by cell fixation, a procedure routinely used when conducting FRET measurements.     

一种改进的荧光共振能量转移方法分析同质二聚体内蛋白质-蛋白质相互作用

荧光共振能量转移(fluorescence resonance energy transfer, FRET)技术日益广泛的应用于检测活细胞中分子内和分子间的相互作用. 由于FRET仅发生于相互作用的供体和受体,即供体-受体复合物之间,所以检测的FRET信号必须经标准化处理以去除供体受体比例和浓度的影响然后才能够进行FRET的比较研究. 由于供体和受体的比例相同,分子内FRET的检测较为简单;而分子间FRET的检测存在更多的不确定因素,导致现有的方法很难精确定量.根据1类特殊的分子间相互作用,同质二聚体的独特特征,推导出供体 受体复合物的含量,进而开发了1种同质二聚体分子间FRET的精确定量的方法,以1种同质二聚体,雌激素受体α(estrogen receptor alpha, ERα)为供体和受体对,通过和其它的方法比较,证实了该方法用于FRET检测可获得更可靠的结果.     

Evolutionary optimization of fluorescent proteins for intracellular FRET

Fluorescent proteins that exhibit Forster resonance energy transfer (FRET) have made a strong impact as they enable measurement of molecular-scale distances through changes in fluorescence. FRET-based approaches have enabled otherwise intractable measurements of molecular concentrations, binding interactions and catalytic activity, but are limited by the dynamic range and sensitivity of the donor-acceptor pair. To address this problem, we applied a quantitative evolutionary strategy using fluorescence-activated cell sorting to optimize a cyan-yellow fluorescent protein pair for FRET. The resulting pair, CyPet-YPet, exhibited a 20-fold ratiometric FRET signal change, as compared to threefold for the parental pair. The optimized FRET pair enabled high-throughput flow cytometric screening of cells undergoing caspase-3-dependent apoptosis. The CyPet-YPet energy transfer pair provides substantially improved sensitivity and dynamic range for a broad range of molecular imaging and screening applications.     

Oxazine dye-conjugated dna oligonucleotides: Förster resonance energy transfer in view of molecular dye-DNA interactions

In this work, the photophysical properties of two oxazine dyes (ATTO 610 and ATTO 680) covalently attached via a C6-amino linker to the 5'-end of short single-stranded as well as double-stranded DNA (ssDNA and dsDNA, respectively) of different lengths were investigated. The two oxazine dyes were chosen because of the excellent spectral overlap, the high extinction coefficients, and the high fluorescence quantum yield of ATTO 610, making them an attractive F?rster resonance energy transfer (FRET) pair for bioanalytical applications in the far-red spectral range. To identify possible molecular dye-DNA interactions that cause photophysical alterations, we performed a detailed spectroscopic study, including time-resolved fluorescence anisotropy and fluorescence correlation spectroscopy measurements. As an effect of the DNA conjugation, the absorption and fluorescence maxima of both dyes were bathochromically shifted and the fluorescence decay times were increased. Moreover, the absorption of conjugated ATTO 610 was spectrally broadened, and a dual fluorescence emission was observed. Steric interactions with ssDNA as well as dsDNA were found for both dyes. The dye-DNA interactions were strengthened from ssDNA to dsDNA conjugates, pointing toward interactions with specific dsDNA domains (such as the top of the double helix). Although these interactions partially blocked the dye-linker rotation, a free (unhindered) rotational mobility of at least one dye facilitated the appropriate alignment of the transition dipole moments in doubly labeled ATTO 610/ATTO 680-dsDNA conjugates for the performance of successful FRET. Considering the high linker flexibility for the determination of the donor-acceptor distances, good accordance between theoretical and experimental FRET parameters was obtained. The considerably large F?rster distance of ~7 nm recommends the application of this FRET pair not only for the detection of binding reactions between nucleic acids in living cells but also for monitoring interactions of larger biomolecules such as proteins.     

Location of cyanine-3 on double-stranded DNA: importance for fluorescence resonance energy transfer studies

Fluorescence resonance energy transfer provides valuable long-range distance information about macromolecules in solution. Fluorescein and Cy3 are an important donor-acceptor pair of fluorophores; the characteristic F?rster length for this pair on DNA is 56 A, so the pair can be used to study relatively long distances. Measurement of FRET efficiency for a series of DNA duplexes terminally labeled with fluorescein and Cy3 suggests that the Cy3 is close to the helical axis of the DNA. An NMR analysis of a self-complementary DNA duplex 5'-labeled with Cy3 shows that the fluorophore is stacked onto the end of the helix, in a manner similar to that of an additional base pair. This provides a known point from which distances calculated from FRET measurements are measured. Using the FRET efficiencies for the series of DNA duplexes as restraints, we have determined an effective position for the fluorescein, which is maximally extended laterally from the helix. The knowledge of the fluorophore positions can now be used for more precise interpretation of FRET data from nucleic acids.     

Organization and dynamics of NBD-labeled lipids in lipid bilayer analyzed by FRET using the small membrane fluorescent probe AHBA as donor

Fluorescent probes are employed to investigate natural and model membranes. It is important to know probe location and extent of perturbations they cause into the lipid bilayer. Förster Resonance Energy Transfer (FRET) is a useful tool to investigate phenomena involving plasma membranes, and reports in literature used relatively large fluorophores like 1,6-diphenylhexatriene, located at the center of the hydrophobic region, 4-aminophthalimide-based molecules located at lipid/water interfaces and BODIPY-labeled phosphatidylcholine. In this work we explored FRET process in 1,2-dimyristoyl-L-α-GPC large unilamellar vesicles, in gel and fluid phase, using as donor the very small group o-Abz bound to hexadecyl chain (2-amino-N-hexadecyl-benzamide - AHBA) and 7-nitro-2-1,3-benzoxadiazol-4-yl (NBD) labeled lipids as acceptor. From the intensity decay of donor in presence of acceptors, the FRET efficiency was calculated, and used to fit the model proposed by Fung and Stryer to that efficiency. Using lipid bilayer structural data, the procedure allowed the determination of Förster distance for each donor-acceptor pair in vesicles, without imposing any value for the orientational factor κ². From distance distributions between o-Abz in AHBA and NBD in lipid bilayer obtained using the program CONTIN, we obtained donor-acceptor populations having different separation distances. The populations reflect the occurrence of FRET involving probes in the same or in opposite leaflet. A dynamic picture emerged showing how relative position of the probes is dependent on the structural thermal phase of the DMPC bilayer. The results emphasize the need of careful analysis in order to understand processes involving fluorescent probes in model membranes.     

Cascade blue as a donor for resonance energy transfer studies of heme-containing proteins

Cascade Blue acetyl azide is an amine reactive compound with spectral properties ideally suited for fluorescence resonance energy transfer (FRET) studies in which heme prosthetic groups serve as acceptors. To demonstrate utility of the Cascade Blue-heme spectroscopic ruler, cytochrome c was employed as a test case to calibrate distance measurements obtained from FRET analysis. Following modification, stoichiometrically labeled cytochrome c was digested with trypsin and derivatized fragments were analyzed by matrix-assisted laser desorption/ionization and electrospray ionization mass spectrometry to identify Lys25 as the predominant site of covalent modification. FRET analysis on derivatized protein demonstrated nearly complete quenching of Cascade Blue fluorescence, indicating the labeled lysine residue to reside within 30 A of the heme prosthetic group. Sodium dodecyl sulfate (SDS) denaturation resulted in an approximately 28% recovery of fluorescence, demonstrating the utility of this donor-acceptor pair for evaluating distance changes of 30-90 A. Modeling the Cascade Blue donor molecule onto Lys25 of a cytochrome c NMR structure confirmed a distance of < or =30 A from the heme acceptor, as determined by FRET analysis. Further modeling of the SDS-denatured state as an extended chain suggested a maximum separation distance of 45 A, also consistent with results derived from FRET analysis.     

Quantitative analysis of FRET assay in biology—new developments in protein interaction affinity and protease kinetics determinations in the SUMOylation cascade

F(o)rster resonance energy transfer (FRET) techniques have been widely used in biological studies in vitro and in vivo and are powerful tools for elucidating protein interactions in many regulatory cas...     

Fluorescence depolarization dynamics of ionic strength sensors using time-resolved anisotropy

Eukaryotic cells exploit dynamic and compartmentalized ionic strength to impact a myriad of biological functions such as enzyme activities, protein-protein interactions, and catalytic functions. Herein, we investigated the fluorescence depolarization dynamics of recently developed ionic strength biosensors (mCerulean3-linker-mCitrine) in Hofmeister salt (KCl, NaCl, NaI, and Na₂SO₄) solutions. The mCerulean3-mCitrine acts as a Förster resonance energy transfer (FRET) pair, tethered together by two oppositely charged α-helices in the linker region. We developed a time-resolved fluorescence depolarization anisotropy approach for FRET analyses, in which the donor (mCerulean3) is excited by 425-nm laser pulses, followed by fluorescence depolarization analysis of the acceptor (mCitrine) in KE (lysine-glutamate), arginine-aspartate, and arginine-glutamate ionic strength sensors with variable amino acid sequences. Similar experiments were carried out on the cleaved sensors as well as an E6G2 construct, which has neutral α-helices in the linker region, as a control. Our results show distinct dynamics of the intact and cleaved sensors. Importantly, the FRET efficiency decreases and the donor-acceptor distance increases as the environmental ionic strength increases. Our chemical equilibrium analyses of the collapsed-to-stretched conformational state transition of KE reveal that the corresponding equilibrium constant and standard Gibbs free energy changes are ionic strength dependent. We also tested the existing theoretical models for FRET analyses using steady-state anisotropy, which reveal that the angle between the dipole moments of the donor and acceptor in the KE sensor are sensitive to the ionic strength. These results help establish the time-resolved depolarization dynamics of these genetically encoded donor-acceptor pairs as a quantitative means for FRET analysis, which complement traditional methods such as time-resolved fluorescence for future in vivo studies.     

The Effect of Dye-Dye Interactions on the Spatial Resolution of Single-Molecule FRET Measurements in Nucleic Acids

We study the effect of dye-dye interactions in labeled double-stranded DNA molecules on the Förster resonance energy transfer (FRET) efficiency at the single-molecule level. An extensive analysis of internally labeled double-stranded DNA molecules in bulk and at the single-molecule level reveals that donor-acceptor absolute distances can be reliably extracted down to ∼3-nm separation, provided that dye-dye quenching is accounted for. At these short separations, we find significant long-lived fluorescence fluctuations among discrete levels originating from the simultaneous and synchronous quenching of both dyes. By comparing four different donor-acceptor dye pairs (TMR-ATTO647N, Cy3-ATTO647N, TMR-Cy5, and Cy3-Cy5), we find that this phenomenon depends on the nature of the dye pair used, with the cyanine pair Cy3-Cy5 showing the least amount of fluctuations. The significance of these results is twofold: First, they illustrate that when dye-dye quenching is accounted for, single-molecule FRET can be used to accurately measure inter-dye distances, even at short separations. Second, these results are useful when deciding which dye pairs to use for nucleic acids analyses using FRET.     

Fluorescence resonance energy transfer (FRET) and competing processes in donor-acceptor substituted DNA strands: a comparative study of ensemble and single-molecule data

We studied the fluorescence resonance energy transfer (FRET) efficiency of different donor-acceptor labeled model DNA systems in aqueous solution from ensemble measurements and at the single molecule level. The donor dyes: tetramethylrhodamine (TMR); rhodamine 6G (R6G); and a carbocyanine dye (Cy3) were covalently attached to the 5'-end of a 40-mer model oligonucleotide. The acceptor dyes, a carbocyanine dye (Cy5), and a rhodamine derivative (JA133) were attached at modified thymidine bases in the complementary DNA strand with donor-acceptor distances of 5, 15, 25 and 35 DNA-bases, respectively. Anisotropy measurements demonstrate that none of the dyes can be observed as a free rotor; especially in the 5-bp constructs the dyes exhibit relatively high anisotropy values. Nevertheless, the dyes change their conformation with respect to the oligonucleotide on a slower time scale in the millisecond range. This results in a dynamic inhomogeneous distribution of donor/acceptor (D/A) distances and orientations. FRET efficiencies have been calculated from donor and acceptor fluorescence intensity as well as from time-resolved fluorescence measurements of the donor fluorescence decay. Dependent on the D/A pair and distance, additional strong fluorescence quenching of the donor is observed, which simulates lower FRET efficiencies at short distances and higher efficiencies at longer distances. On the other hand, spFRET measurements revealed subpopulations that exhibit the expected FRET efficiency, even at short D/A distances. In addition, the measured acceptor fluorescence intensities and lifetimes also partly show fluorescence quenching effects independent of the excitation wavelength, i.e. either directly excited or via FRET. These effects strongly depend on the D/A distance and the dyes used, respectively. The obtained data demonstrate that besides dimerization at short D/A distances, an electron transfer process between the acceptor Cy5 and rhodamine donors has to be taken into account. To explain deviations from FRET theory even at larger D/A distances, we suggest that the pi-stack of the DNA double helix mediates electron transfer from the donor to the acceptor, even over distances as long as 35 base pairs. Our data show that FRET experiments at the single molecule level are rather suited to resolve fluorescent subpopulations in heterogeneous mixture, information about strongly quenched subpopulations gets lost.     

Structure, dynamics, and branch migration of a DNA Holliday junction: a single-molecule fluorescence and modeling study

The Holliday junction (HJ) is a central intermediate of various genetic processes, including homologous and site-specific DNA recombination and DNA replication. Elucidating the structure and dynamics of HJs provides the basis for understanding the molecular mechanisms of these genetic processes. Our previous single-molecule fluorescence studies led to a model according to which branch migration is a stepwise process consisting of consecutive migration and folding steps. These data led us to the conclusion that one hop can be more than 1 basepair (bp); moreover, we hypothesized that continuous runs over the entire sequence homology (5 bp) can occur. Direct measurements of the dependence of the fluorescence resonance energy transfer (FRET) value on the donor-acceptor (D-A) distance are required to justify this model and are the major goal of this article. To accomplish this goal, we performed single-molecule FRET experiments with a set of six immobile HJ molecules with varying numbers of bps between fluorescent dyes placed on opposite arms. The designs were made in such a way that the distances between the donor and acceptor were equal to the distances between the dyes formed upon 1-bp migration hops of a HJ having 10-bp homology. Using these designs, we confirmed our previous hypothesis that the migration of the junction can be measured with bp accuracy. Moreover, the FRET values determined for each acceptor-donor separation corresponded very well to the values for the steps on the FRET time trajectories, suggesting that each step corresponds to the migration of the branch at a defined depth. We used the dependence of the FRET value on the D-A distance to measure directly the size for each step on the FRET time trajectories. These data showed that one hop is not necessarily 1 bp. The junction is able to migrate over several bps, detected as one hop and confirming our model. The D-A distances extracted from the FRET properties of the immobile junctions formed the basis for modeling the HJ structures. The composite data fit a partially opened, side-by-side model with adjacent double-helical arms slightly kinked at the four-way junction and the junction as a whole adopting a global X-shaped form that mimics the coaxially stacked-X structure implicated in previous solution studies.     

Anomalous Surplus Energy Transfer Observed with Multiple FRET Acceptors

Background

Förster resonance energy transfer (FRET) is a mechanism where energy is transferred from an excited donor fluorophore to adjacent chromophores via non-radiative dipole-dipole interactions. FRET theory primarily considers the interactions of a single donor-acceptor pair. Unfortunately, it is rarely known if only a single acceptor is present in a molecular complex. Thus, the use of FRET as a tool for measuring protein-protein interactions inside living cells requires an understanding of how FRET changes with multiple acceptors. When multiple FRET acceptors are present it is assumed that a quantum of energy is either released from the donor, or transferred in toto to only one of the acceptors present. The rate of energy transfer between the donor and a specific acceptor (k_D→A) can be measured in the absence of other acceptors, and these individual FRET transfer rates can be used to predict the ensemble FRET efficiency using a simple kinetic model where the sum of all FRET transfer rates is divided by the sum of all radiative and non-radiative transfer rates.

Methodology/Principal Findings

The generality of this approach was tested by measuring the ensemble FRET efficiency in two constructs, each containing a single fluorescent-protein donor (Cerulean) and either two or three FRET acceptors (Venus). FRET transfer rates between individual donor-acceptor pairs within these constructs were calculated from FRET efficiencies measured after systematically introducing point mutations to eliminate all other acceptors. We find that the amount of energy transfer observed in constructs having multiple acceptors is significantly greater than the FRET efficiency predicted from the sum of the individual donor to acceptor transfer rates.

Conclusions/Significance

We conclude that either an additional energy transfer pathway exists when multiple acceptors are present, or that a theoretical assumption on which the kinetic model prediction is based is incorrect.     

Detection of frequency resonance energy transfer pair on double-labeled microsphere and Bacillus anthracis spores by flow cytometry

Development of an ultrasensitive biosensor for biological hazards in the environment is a major need for pollutant control and for the detection of biological warfare. Fluorescence methods combined with immunodiagnostic methods are the most common. To minimize background noise, arising from the unspecific adsorption effect, we have adapted the FRET (frequency resonance energy transfer) effect to the immunofluorescence method. FRET will increase the selectivity of the diagnosis process by introducing a requirement for two different reporter molecules that have to label the antigen surface at a distance that will enable FRET. Utilizing the multiparameter capability of flow cytometry analysis to analyze the double-labeling/FRET immunostaining will lead to a highly selective and sensitive diagnostic method. This work examined the FRET interaction of fluorescence-labeled avidin molecules on biotin-coated microspheres as a model system. As target system, we have used labeled polyclonal antibodies on Bacillus anthracis spores. The antibodies used were purified immunoglobulin G (IgG) molecules raised in rabbits against B. anthracis exosoporium components. The antibodies were fluorescence labeled by a donor-acceptor chromophore pair, alexa488 as a donor and alexa594 as an acceptor. On labeling the spores with alexa488-IgG as a donor and alexa594-IgG as an acceptor, excitation at 488 nm results in quenching of the alexa-488 fluorescence (E(q) = 35%) and appearance of the alexa594 fluorescence (E(s) = 22%), as detected by flow cytometry analysis. The FRET effect leads to a further isolated gate (FL1/FL3) for the target spores compared to competitive spores such as B. thuringiensis subsp. israelensis and B. subtilis. This new approach, combining FRET labeling and flow cytometry analysis, improved the selectivity of the B. anthracis spores by a factor of 10 with respect to B. thuringiensis subsp. israelensis and a factor of 100 with respect to B. subtilis as control spores.     

Evaluation by fluorescence resonance energy transfer of the stability of nonviral gene delivery vectors under physiological conditions

The stability in physiological medium of polyplex- and lipoplex-type nonviral gene vectors was evaluated by detecting the conformational change of complexed plasmid DNA (pDNA) labeled simultaneously with fluorescein (energy donor) and X-rhodamine (energy acceptor) through fluorescence resonance energy transfer (FRET). Upon mixing with cationic components, such as LipofectAMINE, poly(L-lysine), and poly(ethylene glycol)-poly(L-lysine) block copolymer (PEG-PLys), the fluorescence spectrum of doubly labeled pDNA underwent a drastic change due to the occurrence of FRET between the donor-acceptor pair on pDNA taking a globular conformation (condensed state) through complexation. The measurement was carried out also in the presence of 20% serum, under which conditions FRET from condensed pDNA was clearly monitored without interference from coexisting components in the medium, allowing evaluation of the condensed state of pDNA in nonviral gene vectors under physiological conditions. Serum addition immediately induced a sharp decrease in FRET for the LipofectAMINE/pDNA (lipoplex) system, which was consistent with the sharp decrease in the transfection efficiency of the lipoplex system in serum-containing medium. In contrast, the PEG-PLys/pDNA polyplex (polyion complex micelle) system maintained appreciable transfection efficiency even in serum-containing medium, and FRET efficiency remained constant for up to 12 h, indicating the high stability of the polyion complex micelle under physiological conditions.     

Longer wavelength fluorescence resonance energy transfer depsipeptide substrates for hepatitis C virus NS3 protease

Maturation of the hepatitis C virus (HCV) polyprotein occurs by a series of proteolytic processes catalyzed by host cell proteases and the virally encoded proteases NS2 and NS3. Although several peptidomimetic inhibitors of NS3 protease have been published, only a few small molecule inhibitors have been reported. In an effort to improve screening efficiency by minimizing the spectral interference of various test compounds, a substrate that contains the longer wavelength fluorescence resonance energy transfer (FRET) pair, TAMRA/QSY-7, was devised. For the optimized substrate T-Abu-Q, with sequence Ac-Asp-Glu-Lys(TAMRA)-Glu-Glu-Abu-Psi(COO)Ala-Ser-Lys(QSY-7)-amide, the kinetic parameters with HCV NS3 protease are K(m)=30 microM, k(cat)=0.6s(-1), and k(cat)/K(m)=20,100s(-1)M(-1). We show that this substrate is suitable for inhibitor analysis and mechanistic studies so long as the substrate concentration is low enough (0.5 microM) to avoid complications from high inner filter effects. The substrate is especially useful with ultra-high-density screening formats, such as microarrayed compound screening technology, because there is less spectral interference from the compounds being tested than with more traditional (EDANS/DABCYL) FRET protease substrates. The merits of the new substrate, as well as potential applications of this FRET pair to other protease substrates, are discussed.     

Limitations of electronic energy transfer in the determination of lipid nanodomain sizes

Even though superresolution microscopy indicates that size of plasma membrane rafts is <20 nm, those structures have never been observed. Förster resonance energy transfer (FRET) is therefore still the most powerful optical method for characterization of such domains. In this letter we investigate relation between nanodomain affinity of a donor-acceptor (D/A) pair and the detectable nanodomain size/area. We show that probes with high affinity to the liquid-ordered (L_o) phase are required for detecting domain sizes of a few nanometers, and/or domains that occupy a few percent of the bilayer area. A combination of donors and acceptors that prefer different phases is the more favorable approach. For instance, a D/A pair with the distribution constant of donors K_D = 5 and acceptors K_A = 0.01 can resolve a broad spectrum of nanodomain sizes. On the other hand, currently available donors and acceptors that prefer the same phase, either the liquid-disordered (L_d) or L_o phase, are not so convenient for determining domain sizes <20 nm. Here the detection limits of FRET experiments employing several commonly used D/A pairs have been investigated.     

Fluorescence resonance energy transfer shows a close helix-helix distance in the transmembrane M13 procoat protein

During the membrane insertion process the major coat protein of bacteriophage M13 assumes a conformation in which two transmembrane helices corresponding to the leader sequence and the anchor region in the mature part of the protein coming into close contact with each other. Previous studies on the molecular mechanism of membrane insertion of M13 procoat protein have shown that this interaction between the two helices might drive the actual translocation process. We investigated the intramolecular distance between the two helices of the transmembrane procoat protein by measuring fluorescence resonance energy transfer (FRET) between the donor (Tyr) placed in one helix and the acceptor (Trp) placed in the other helix. Various mutant procoat proteins with differently positioned donor-acceptor pairs were generated, purified, and reconstituted into artificial lipid bilayers. The results obtained from the FRET measurements, combined with molecular modeling, show that the transmembrane helices are in close contact on the order of 1-1.5 nm. The present approach might be of general interest for determining the topology and the folding of membrane proteins.     

An ion-insensitive cAMP biosensor for long term quantitative ratiometric fluorescence resonance energy transfer (FRET) measurements under variable physiological conditions

Ratiometric measurements with FRET-based biosensors in living cells using a single fluorescence excitation wavelength are often affected by a significant ion sensitivity and the aggregation behavior of the FRET pair. This is an important problem for quantitative approaches. Here we report on the influence of physiological ion concentration changes on quantitative ratiometric measurements by comparing different FRET pairs for a cAMP-detecting biosensor. We exchanged the enhanced CFP/enhanced YFP FRET pair of an established Epac1-based biosensor by the fluorophores mCerulean/mCitrine. In the case of enhanced CFP/enhanced YFP, we showed that changes in proton, and (to a lesser extent) chloride ion concentrations result in incorrect ratiometric FRET signals, which may exceed the dynamic range of the biosensor. Calcium ions have no direct, but an indirect pH-driven effect by mobilizing protons. These ion dependences were greatly eliminated when mCerulean/mCitrine fluorophores were used. For such advanced FRET pairs the biosensor is less sensitive to changes in ion concentration and allows consistent cAMP concentration measurements under different physiological conditions, as occur in metabolically active cells. In addition, we verified that the described FRET pair exchange increased the dynamic range of the FRET efficiency response. The time window for stable experimental conditions was also prolonged by a faster biosensor expression rate in transfected cells and a greatly reduced tendency to aggregate, which reduces cytotoxicity. These properties were verified in functional tests in single cells co-expressing the biosensor and the 5-HT(1A) receptor.     

A new pair for inter- and intra-molecular FRET measurement

Fluorescence resonance energy transfer between mutant green fluorescent proteins provides powerful means to monitor in vivo protein-protein proximity and intracellular signaling. However, the current widely applied FRET pair of this class (CFP/YFP) requires excitation by expensive UV lasers, thereby hindering FRET imaging on many confocal microscopes. Further challenges arise from the large spectral overlap of CFP/YFP emission. Another FRET pair GFP/DsRed could obviate such limitations. However, the use of DsRed as a FRET acceptor is hampered by several critical problems, including a slow and incomplete maturation and obligate tetramerization. A tandem dimer mutant of DsRed (TDimer2) has similar spectral properties as those of DsRed. The rapid maturation and non-oligomerization make TDimer2 a promising substitute for DsRed in FRET experiments. Here, we have explored the possibility of using TDimer2 as a FRET acceptor for the donor EGFP. FRET was demonstrated between the EGFP-TDimer2 chimeric fusion protein. By substituting CFP/YFP in the Ca2+-sensor cameleon with EGFP/TDimer2, dynamic changes in cytosolic free Ca2+ concentrations were observed with 488nm excitation under conventional wide-field microscopy. The EGFP/TDimer2 pair was further successfully employed to monitor inter-molecular interaction between Syntaxin and SNAP25. These results reveal EGFP/TDimer2 as a promising FRET pair in monitoring intra-molecular conformation change as well as inter-molecular interaction.