Insertion kinetics of a denatured alpha helical membrane protein into phospholipid bilayer vesicles

Membrane protein folding has suffered from a lack of detailed kinetic studies, particularly with regard to the insertion of denatured protein into lipid bilayers. We present a detailed in vitro kinetic study of the association of a denatured, transmembrane alpha helical protein with lipid vesicles. The mechanism of folding of Escherichia coli diacylglycerol kinase from a partially denatured state in urea has been investigated. The protein associates with lipid vesicles to give a protein, vesicle complex with an apparent association constant of 2 x 10(6) M(-1) s(-1). This association rate approaches the diffusion limit of the protein, vesicle reaction. The association of the protein with lipid vesicles is followed by a slower process occurring at observed rate of 0.031 s(-1), involving insertion into the bilayer and generation of a functional oligomer of diacylglycerol kinase. Protein aggregation competes with vesicle insertion. The urea-denatured protein monomers begin to aggregate as soon as the urea is diluted. This aggregation is faster than the association of the protein with vesicles so that most protein aggregates before it inserts into a vesicle. Increasing the vesicle concentration favours insertion of protein monomers, but at high vesicle concentrations monomers are primarily in separate vesicles and do not associate to form functional oligomers. Irreversible aggregation limits the yield of functional protein, while the data also suggest that lipid vesicles can reverse another aggregation reaction, leading to the recovery of correctly folded protein.     

Controlling the folding efficiency of an integral membrane protein

Research into the folding mechanisms of integral membrane proteins lags far behind that of water-soluble proteins, to the extent that the term protein folding is synonymous with water-soluble proteins. Hydrophobic membrane proteins, and particularly those with transmembrane alpha-helical motifs, are frequently considered too difficult to work with. We show that the stored curvature elastic stress of lipid bilayers can be used to guide the design of efficient folding systems for these integral membrane proteins. The curvature elastic stress of synthetic phosphatidylcholine/phosphatidylethanolamine lipid bilayers can be used to control both the rate of folding and the yield of folded protein. The use of a physical bilayer property generalises this approach beyond the particular chemistry of the lipids involved.     

Folding of a small helical protein using hydrogen bonds and hydrophobicity forces

A reduced protein model with five to six atoms per amino acid and five amino acid types is developed and tested on a three-helix-bundle protein, a 46-amino acid fragment from staphylococcal protein A. The model does not rely on the widely used Go approximation, which ignores non-native interactions. We find that the collapse transition is considerably more abrupt for the protein A sequence than for random sequences with the same composition. The chain collapse is found to be at least as fast as helix formation. Energy minimization restricted to the thermodynamically favored topology gives a structure that has a root-mean-square deviation of 1.8 A from the native structure. The sequence-dependent part of our potential is pairwise additive. Our calculations suggest that fine-tuning this potential by parameter optimization is of limited use.     

Folding of DsbB in mixed micelles: a kinetic analysis of the stability of a bacterial membrane protein

Measuring the stability of integrated membrane proteins under equilibrium conditions is hampered by the nature of the proteins' amphiphilic environment. While intrinsic fluorescence is a useful probe for structural changes in water-soluble proteins, the fluorescence of membrane proteins is sensitive to changes in lipid and detergent composition. As an attempt to overcome this problem, I present a kinetic analysis of the folding of a membrane protein, disulfide bond reducing protein B (DsbB), in a mixed micelle system consisting of varying molar ratios of sodium dodecyl sulfate (SDS) and dodecyl maltoside (DM). This analysis incorporates both folding and unfolding rates, making it possible to determine both the stability of the native state and the process by which the protein folds. Refolding and unfolding occur on the second to millisecond timescale and involve only one relaxation phase, when monitored by conventional stopped-flow. The kinetic data indicate that denaturation occurs around 0.3 mole fraction of SDS, in agreement with CD analysis and acrylamide quenching data. The rate constants have been fit to a three-state folding scheme involving the SDS-denatured state, the native state and an unfolding intermediate that accumulates only under unfolding conditions at high mole fractions of SDS. The stability of DsbB is around 4.4 kcal/mol in DM, and this is halved upon reduction of the two periplasmic disulfide bonds, and is sensitive to mutagenesis. With the caveat that kinetic data are always open to alternative interpretations, time-resolved studies in mixed micelles provide a useful approach to measure membrane protein stability over a wide range of concentrations of SDS and DM, as well as a framework for the future characterization of the DsbB folding mechanism.     

Revisiting the folding kinetics of bacteriorhodopsin

The elucidation of the physical principles that govern the folding and stability of membrane proteins is one of the greatest challenges in protein science. Several insights into the folding of α-helical membrane proteins have come from the investigation of the conformational equilibrium of H. halobium bacteriorhodopsin (bR) in mixed micelles using SDS as a denaturant. In an effort to confirm that folded bR and SDS-denatured bR reach the same conformational equilibrium, we found that bR folding is significantly slower than has been previously known. Interrogation of the effect of the experimental variables on folding kinetics reveals that the rate of folding is dependent not only on the mole fraction of SDS but also on the molar concentrations of mixed micelle components, a variable that was not controlled in the previous study of bR folding kinetics. Moreover, when the molar concentrations of mixed micelle components are fixed at the concentrations commonly employed for bR equilibrium studies, conformational relaxation in the transition zone is slower than hydrolysis of the retinal Schiff base. As a result, the conformational equilibrium between folded bR and SDS-denatured bR cannot be achieved under the conventional condition. Our finding suggests that the molar concentrations of mixed micelle components are important experimental variables in the investigation of the kinetics and thermodynamics of bR folding and should be accounted for to ensure the accurate assessment of the conformational equilibrium of bR without the interference of retinal hydrolysis.     

Probing membrane protein unfolding with pulse proteolysis

Technical challenges have greatly impeded the investigation of membrane protein folding and unfolding. To develop a new tool that facilitates the study of membrane proteins, we tested pulse proteolysis as a probe for membrane protein unfolding. Pulse proteolysis is a method to monitor protein folding and unfolding, which exploits the significant difference in proteolytic susceptibility between folded and unfolded proteins. This method requires only a small amount of protein and, in many cases, may be used with unpurified proteins in cell lysates. To evaluate the effectiveness of pulse proteolysis as a probe for membrane protein unfolding, we chose Halobacterium halobium bacteriorhodopsin (bR) as a model system. The denaturation of bR in SDS has been investigated extensively by monitoring the change in the absorbance at 560 nm (A₅₆₀). In this work, we demonstrate that denaturation of bR by SDS results in a significant increase in its susceptibility to proteolysis by subtilisin. When pulse proteolysis was applied to bR incubated in varying concentrations of SDS, the remaining intact protein determined by electrophoresis shows a cooperative transition. The midpoint of the cooperative transition (C_m) shows excellent agreement with that determined by A₅₆₀. The C_m values determined by pulse proteolysis for M56A and Y57A bRs are also consistent with the measurements made by A₅₆₀. Our results suggest that pulse proteolysis is a quantitative tool to probe membrane protein unfolding. Combining pulse proteolysis with Western blotting may allow the investigation of membrane protein unfolding in situ without overexpression or purification.     

Thermodynamics of unfolding of an integral membrane protein in mixed micelles

Quantitative studies of membrane protein folding and unfolding can be difficult because of difficulties with efficient refolding as well as a pronounced propensity to aggregate. However, mixed micelles, consisting of the anionic detergent sodium dodecyl sulfate and the nonionic detergent dodecyl maltoside facilitate reversible and quantitative unfolding and refolding. The 4-transmembrane helix protein DsbB from the inner membrane of Escherichia coli unfolds in mixed micelles according to a three-state mechanism involving an unfolding intermediate I. The temperature dependence of the kinetics of this reaction between 15 degrees and 45 degrees C supports that unfolding from I to the denatured state D is accompanied by a significant decrease in heat capacity. For water-soluble proteins, the heat capacity increases upon unfolding, and this is generally interpreted as the increased binding of water to the protein as it unfolds, exposing more surface area. The decrease in DsbB's heat capacity upon unfolding is confirmed by independent thermal scans. The decrease in heat capacity is not an artifact of the use of mixed micelles, since the water soluble protein S6 shows conventional heat-capacity changes in detergent. We speculate that it reflects the binding of SDS to parts of DsbB that are solvent-exposed in the native DM-bound state. This implies that the periplasmic loops of DsbB are relatively unstructured. This anomalous thermodynamic behavior has not been observed for beta-barrel membrane proteins, probably because they do not bind SDS so extensively. Thus the thermodynamic behavior of membrane proteins appears to be intimately connected to their detergent-binding properties.     

Shape variation of bilayer membrane daughter vesicles induced by anisotropic membrane inclusions

A theoretical model of a two-component bilayer membrane was used in order to describe the influence of anisotropic membrane inclusions on shapes of membrane daughter micro and nano vesicles. It was shown that for weakly anisotropic inclusions the stable vesicle shapes are only slightly out-of-round. In contrast, for strongly anisotropic inclusions the stable vesicle shapes may significantly differ from spheres, i.e. they have a flattened oblate shape at small numbers of inclusions in the membrane, and an elongated cigar-like prolate shape at high numbers of inclusions in the vesicle membrane.     

Phasing statistics for alpha helical membrane protein structures

In this report we highlight the latest trends in phasing methods used to solve alpha helical membrane protein structures and analyze the use of heavy atom metals for the purpose of experimental phasing. Our results reveal that molecular replacement is emerging as the most successful method for phasing alpha helical membrane proteins, with the notable exception of the transporter family, where experimentally derived phase information still remains the most effective method. To facilitate selection of heavy atoms salts for experimental phasing an analysis of these was undertaken and indicates that organic mercury salts are still the most successful heavy atoms reagents. Interestingly the use of seleno‐l ‐methionine incorporated protein has increased since earlier studies into membrane protein phasing, so too the use of SAD and MAD as techniques for phase determination. Taken together this study provides a brief snapshot of phasing methods for alpha helical membrane proteins and suggests possible routes for heavy atom selection and phasing methods based on currently available data.     

Secondary and tertiary structure formation of the beta-barrel membrane protein OmpA is synchronized and depends on membrane thickness

The mechanism of membrane insertion and folding of a beta-barrel membrane protein has been studied using the outer membrane protein A (OmpA) as an example. OmpA forms an eight-stranded beta-barrel that functions as a structural protein and perhaps as an ion channel in the outer membrane of Escherichia coli. OmpA folds spontaneously from a urea-denatured state into lipid bilayers of small unilamellar vesicles. We have used fluorescence spectroscopy, circular dichroism spectroscopy, and gel electrophoresis to investigate basic mechanistic principles of structure formation in OmpA. Folding kinetics followed a second-order rate law and is strongly depended on the hydrophobic thickness of the lipid bilayer. When OmpA was refolded into model membranes of dilaurylphosphatidylcholine, fluorescence kinetics were characterized by a rate constant that was about fivefold higher than the rate constants of formation of secondary and tertiary structure, which were determined by circular dichroism spectroscopy and gel electrophoresis, respectively. The formation of beta-sheet secondary structure and closure of the beta-barrel of OmpA were correlated with the same rate constant and coupled to the insertion of the protein into the lipid bilayer. OmpA, and presumably other beta-barrel membrane proteins therefore do not follow a mechanism according to the two-stage model that has been proposed for the folding of alpha-helical bundle membrane proteins. These different folding mechanisms are likely a consequence of the very different intramolecular hydrogen bonding and hydrophobicity patterns in these two classes of membrane proteins.     

Predicting repeat protein folding kinetics from an experimentally determined folding energy landscape

The Notch ankyrin domain is a repeat protein whose folding has been characterized through equilibrium and kinetic measurements. In previous work, equilibrium folding free energies of truncated constructs were used to generate an experimentally determined folding energy landscape (Mello and Barrick, Proc Natl Acad Sci USA 2004;101:14102–14107). Here, this folding energy landscape is used to parameterize a kinetic model in which local transition probabilities between partly folded states are based on energy values from the landscape. The landscape‐based model correctly predicts highly diverse experimentally determined folding kinetics of the Notch ankyrin domain and sequence variants. These predictions include monophasic folding and biphasic unfolding, curvature in the unfolding limb of the chevron plot, population of a transient unfolding intermediate, relative folding rates of 19 variants spanning three orders of magnitude, and a change in the folding pathway that results from C‐terminal stabilization. These findings indicate that the folding pathway(s) of the Notch ankyrin domain are thermodynamically selected: the primary determinants of kinetic behavior can be simply deduced from the local stability of individual repeats.     

Optimization of the design and preparation of nanoscale phospholipid bilayers for its application to solution NMR

Despite arduous efforts and recent technological developments structural investigation of integral membrane proteins remains a challenge. The primary deterrents include difficulties with their expression, low inherent solubility, and problems associated with existing membrane mimicking systems. A relatively new class of membrane mimetics, nanodiscs, is emerging as a promising alternative. Although nanodiscs have been proven successful for several biophysical applications, they yet remain to become the system of preferred choice for structure determination. We have hereby made nanodiscs more suitable for solution NMR applications by reducing the diameter of the self‐assembly complex to its potential limit. We achieved a noticeable improvement in the quality of NMR spectra obtained for the transmembrane and cytoplasmic domains of integrin α_IIb incorporated into these smaller discs rendering them susceptible for a thorough structural investigation. In addition, we also present an on‐column method for a rapid, efficient, single‐step preparation of protein incorporated nanodiscs at high concentrations. These discs have been fully characterized by transmission electron microscopy, dynamic light scattering, and differential scanning calorimetry. Proteins 2013; 81:1222–1231. © 2013 Wiley Periodicals, Inc.     

The major outer membrane protein of Fusobacterium nucleatum (FomA) folds and inserts into lipid bilayers via parallel folding pathways

Membrane protein insertion and folding was studied for the major outer membrane protein of Fusobacterium nucleatum (FomA), which is a voltage-dependent general diffusion porin. The transmembrane domain of FomA forms a beta-barrel that is predicted to consist of 14 beta-strands. Here, unfolded FomA is shown to insert and fold spontaneously and quantitatively into phospholipid bilayers upon dilution of the denaturant urea, which was shown previously only for outer membrane protein A (OmpA) of Escherichia coli. Folding of FomA is demonstrated by circular dichroism and fluorescence spectroscopy, by SDS-polyacrylamide gel electrophoresis, and by single-channel recordings. Refolded FomA had a single-channel conductance of 1.1 nS at 1 M KCl, in agreement with the conductance of FomA isolated from membranes in native form. In contrast to OmpA, which forms a smaller eight-stranded beta-barrel domain, folding kinetics of the larger FomA were slower and provided evidence for parallel folding pathways of FomA into lipid bilayers. Two pathways were observed independent of membrane thickness with two different lipid bilayers, which were either composed of dicapryl phosphatidylcholine or dioleoyl phosphatidylcholine. This is the first observation of parallel membrane insertion and folding pathways of a beta-barrel membrane protein from an unfolded state in urea into lipid bilayers. The kinetics of both folding pathways depended on the chain length of the lipid and on temperature with estimated activation energies of 19 kJ/mol (dicapryl phosphatidylcholine) and 70 kJ/mol (dioleoyl phosphatidylcholine) for the faster pathways.     

Mycobacterium tuberculosis copper‐regulated protein SocB is an intrinsically disordered protein that folds upon interaction with a synthetic phospholipid bilayer

Multiple genes in Mycobacterium tuberculosis (Mtb) are regulated by copper including socAB (s mall o rf induced by c opper A and B), which is induced by copper and repressed by RicR (r egulated i n c opper r epressor). socA and socB encode hypothetical proteins of 61 and 54 amino acids, respectively. Here, we use biophysical and computational methods to evaluate the SocB structure. We find that SocB lacks evidence for secondary structure, with no thermal cooperative unfolding event, according to circular dichroism measurements. 2D NMR spectra similarly exhibit hallmarks of a disordered structural state, which is also supported by analyzing SocB diffusion. Altogether, these findings suggest that by itself SocB is intrinsically disordered. Interestingly, SocB interacts with a synthetic phospholipid bilayer and becomes helical, which suggests that it may be membrane‐associated. Proteins 2016; 84:193–200. © 2015 Wiley Periodicals, Inc.     

Interaction of charged lipid vesicles with planar bilayer lipid membranes: Detection by antibiotic membrane probes

A technique has been developed for monitoring the interaction of charged phospholipid vesicles with planar bilayer lipid membranes (BLM) by use of the antibiotics Valinomycin, Nonactin, and Monazomycin as surface-charge probes. Anionic phosphatidylserine vesicles, when added to one aqueous compartment of a BLM, are shown to impart negative surface charge to zwitterionic phosphatidylocholine and phosphatidylethanolamine bilayers. The surface charge is distributed asymmertically, mainly on the vesicular side of the BLM, and is not removed by exchange of the vesicular aqueous solution. Possible mechanisms for the vesicle-BLM interactions are discussed.     

Protein-catalyzed phospholipid exchange in bilayer vesicles determined by flow cytometry and electron microscopy

The protein-induced lipid transfer between phosphatidylcholine vesicles was investigated. Measurements of the degree of polarization at single vesicles were made by flow cytometry using diphenylhexatriene as the optical probe. Vesicles differing in phase transition temperature could be distinguished by their degree of polarization at a temperature where one population was in the fluid ($\text{T > T}{}_{\mathrm{<mtext>t</mtext>}}$) and the other one in the quasi-crystalline ($\text{T < T}{}_{\mathrm{<mtext>t</mtext>}}$) state. Besides vesicles containing exchanged lipids we also observed fractions of unaffected vesicles. The lipid exchange was visualized directly by freeze-fracture electron microscopy. The characteristic ‘ripple’ structure of phosphatidylcholine vesicles disappeared upon exchange with lipid in the fluid state.     

Folding thermodynamics and kinetics of the leucine-rich repeat domain of the virulence factor Internalin B

Although the folding of alpha-helical repeat proteins has been well characterized, much less is known about the folding of repeat proteins containing beta-sheets. Here we investigate the folding thermodynamics and kinetics of the leucine-rich repeat (LRR) domain of Internalin B (InlB), an extracellular virulence factor from the bacterium Lysteria monocytogenes. This domain contains seven tandem leucine-rich repeats, of which each contribute a single beta-strand that forms a continuous beta-sheet with neighboring repeats, and an N-terminal alpha-helical capping motif. Despite its modular structure, InlB folds in an equilibrium two-state manner, as reflected by the identical thermodynamic parameters obtained by monitoring its sigmoidal urea-induced unfolding transition by different spectroscopic probes. Although equilibrium two-state folding is common in alpha-helical repeat proteins, to date, InlB is the only beta-sheet-containing repeat protein for which this behavior is observed. Surprisingly, unlike other repeat proteins exhibiting equilibrium two-state folding, InlB also folds by a simple two-state kinetic mechanism lacking intermediates, aside from the effects of prolyl isomerization on the denatured state. However, like other repeat proteins, InlB also folds significantly more slowly than expected from contact order. When plotted against urea, the rate constants for the fast refolding and single unfolding phases constitute a linear chevron that, when fitted with a kinetic two-state model, yields thermodynamic parameters matching those observed for equilibrium folding. Based on these kinetic parameters, the transition state is estimated to comprise 40% of the total surface area buried upon folding, indicating that a large fraction of the native contacts are formed in the rate-limiting step to folding.     

A comprehensive database of verified experimental data on protein folding kinetics

Insights into protein folding rely increasingly on the synergy between experimental and theoretical approaches. Developing successful computational models requires access to experimental data of sufficient quantity and high quality. We compiled folding rate constants for what initially appeared to be 184 proteins from 15 published collections/web databases. To generate the highest confidence in the dataset, we verified the reported lnk_f value and exact experimental construct and conditions from the original experimental report(s). The resulting comprehensive database of 126 verified entries, ACPro, will serve as a freely accessible resource ( https://www.ats.amherst.edu/protein/ ) for the protein folding community to enable confident testing of predictive models. In addition, we provide a streamlined submission form for researchers to add new folding kinetics results, requiring specification of all the relevant experimental information according to the standards proposed in 2005 by the protein folding consortium organized by Plaxco. As the number and diversity of proteins whose folding kinetics are studied expands, our curated database will enable efficient and confident incorporation of new experimental results into a standardized collection. This database will support a more robust symbiosis between experiment and theory, leading ultimately to more rapid and accurate insights into protein folding, stability, and dynamics.     

Behavior of silkworm yolk protein on phospholipid membranes

During early development, the plasma membrane of silkworm (Bombyx mori) eggs undergoes a superficial cleavage that separates the blastodermal protoplasm and the yolk. To test whether the blastoderm absorbs yolk through the plasma membrane in B. mori, we studied the interaction of phospholipid membranes and yolk using a phospholipid planar bilayer membrane (PBM) and liposomes. In addition, egg-specific protein (ESP; 225 kDa), a yolk protein that is specific to B. mori eggs, was collected by fractionating the eggs. Liposomes were mixed with either B. mori yolk or ESP, and observed under an electron microscope. This showed that the phospholipid membrane was spanned by fine particles 10-20 nm in diameter. Both yolk and ESP caused the PBM to become extraordinarily leaky, with a membrane potential of −70 mV for yolk and −198 mV for ESP. These results suggest that although it is a water-soluble protein, ESP permeates the phospholipid membrane without the help of enzymes.     

Folding and association of an extremely stable dimeric protein from Sulfolobus islandicus

ORF56 is a plasmid-encoded protein from Sulfolobus islandicus, which probably controls the copy number of the pRN1 plasmid by binding to its own promotor. The protein showed an extremely high stability in denaturant, heat, and pH-induced unfolding transitions, which can be well described by a two-state reaction between native dimers and unfolded monomers. The homodimeric character of native ORF56 was confirmed by analytical ultracentrifugation. Far-UV circular dichroism and fluorescence spectroscopy gave superimposable denaturant-induced unfolding transitions and the midpoints of both heat as well as denaturant-induced unfolding depend on the protein concentration supporting the two-state model. This model was confirmed by GdmSCN-induced unfolding monitored by heteronuclear 2D NMR spectroscopy. Chemical denaturation was accomplished by GdmCl and GdmSCN, revealing a Gibbs free energy of stabilization of -85.1 kJ/mol at 25 degrees C. Thermal unfolding was possible only above 1 M GdmCl, which shifted the melting temperature (t(m)) below the boiling point of water. Linear extrapolation of t(m) to 0 M GdmCl yielded a t(m) of 107.5 degrees C (5 microM monomer concentration). Additionally, ORF56 remains natively structured over a remarkable pH range from pH 2 to pH 12. Folding kinetics were followed by far-UV CD and fluorescence after either stopped-flow or manual mixing. All kinetic traces showed only a single phase and the two probes revealed coincident folding rates (k(f), k(u)), indicating the absence of intermediates. Apparent first-order refolding rates depend linearly on the protein concentration, whereas the unfolding rates do not. Both lnk(f) and lnk(u) depend linearly on the GdmCl concentration. Together, folding and association of homodimeric ORF56 are concurrent events. In the absence of denaturant ORF56 refolds fast (7.0 x 10(7)M(-1)s(-1)) and unfolds extremely slowly (5.7 year(-1)). Therefore, high stability is coupled to a slow unfolding rate, which is often observed for proteins of extremophilic organisms.