Corticosteroid-Binding Globulin: Structure-Function Implications from Species Differences

Corticosteroid-binding globulin (CBG) transports glucocorticoids and progesterone in the blood and thereby modulates the tissue availability of these hormones. As a member of the serine protease inhibitor (SERPIN) family, CBG displays a reactive center loop (RCL) that is targeted by proteinases. Cleavage of the RCL is thought to trigger a SERPIN-typical stressed-to-relaxed (S-to-R) transition that leads to marked structural rearrangements and a reduced steroid-binding affinity. To characterize structure-function relationships in CBG we studied various conformational states of E. coli-produced rat and human CBG. In the 2.5 Å crystal structure of human CBG in complex with progesterone, the RCL is cleaved at a novel site that differs from the known human neutrophil elastase recognition site. Although the cleaved RCL segment is five residues longer than anticipated, it becomes an integral part of β-sheet A as a result of the S-to-R transition. The atomic interactions observed between progesterone and CBG explain the lower affinity of progesterone in comparison to corticosteroids. Surprisingly, CD measurements in combination with thermal unfolding experiments show that rat CBG fails to undergo an S-to-R transition upon proteolytic cleavage of the RCL hinting that the S-to-R transition observed in human CBG is not a prerequisite for CBG function in rat. This observation cautions against drawing general conclusions about molecular mechanisms by comparing and merging structural data from different species.     

Corticosteroid-binding globulin reactive centre loop antibodies recognise only the intact natured protein: elastase cleaved and uncleaved CBG may coexist in circulation

Corticosteroid-binding globulin (CBG) is the principal carrier of cortisol in circulation and is a non-inhibitory member of the serpin family of serine proteinase inhibitors. It possesses an exposed elastase specific site which, when cleaved, allows a conformational change promoting the delivery of cortisol to sites of inflammation. Previously there was no ability to independently distinguish between the uncleaved, stressed, conformer of CBG and total CBG in circulation. Here we raised and characterized monoclonal antibodies generated against a synthetic peptide spanning the elastase cleavage site within the exposed reactive centre loop (RCL) and measured changes in CBG by ELISA following treatment with human neutrophil elastase. The antibodies recognized the synthetic peptide as well as intact CBG and the epitope (STGVTLNL) spanned the elastase cleavage site. Treatment of plasma with elastase resulted in a complete loss of CBG levels determined using these RCL antibodies whereas CBG levels measured with an unrelated CBG monoclonal antibody were unaffected. We also compared plasma levels of CBG measured by RCL antibodies and an unrelated CBG antibody and showed discordance in some samples. This study shows for the first time the ability to measure the intact, stressed conformer of CBG. We report discordance with total CBG in some samples implying the presence of cleaved CBG in circulation. This is an important finding as it has implications for free cortisol which hitherto have been determined from total cortisol and total CBG levels. This antibody could be used for determining the time course of intact CBG in various relevant patient cohorts and for structure/function studies on the biology of human CBG.     

The S-to-R transition of corticosteroid-binding globulin and the mechanism of hormone release

Corticosteroids are transported in the blood by a serpin, corticosteroid-binding globulin (CBG), and their normally equilibrated release can be further triggered by the cleavage of the reactive loop of CBG. We report here the crystal structures of cleaved human CBG (cCBG) at 1.8-Å resolution and its complex with cortisol at 2.3-Å resolution. As expected, on cleavage, CBG undergoes the irreversible S-to-R serpin transition, with the cleaved reactive loops being fully incorporated into the central β-sheet. A connecting loop of helix D, which is in a helix-like conformation in native CBG, unwinds and grossly perturbs the hormone binding site following β-sheet expansion in the cCBG structure but shifts away from the binding site by more than 8 Å following the binding of cortisol. Unexpectedly, on cortisol binding, the hormone binding site of cCBG adopts a configuration almost identical with that of the native conformer. We conclude that CBG has adapted an allosteric mechanism of the serpins to allow equilibrated release of the hormones by a flip-flop movement of the intact reactive loop into and out of the β-sheet. The change in the hormone binding affinity results from a change in the flexibility or plasticity of the connecting loop, which modulates the configuration of the binding site.     

Partitioning of serpin-proteinase reactions between stable inhibition and substrate cleavage is regulated by the rate of serpin reactive center loop insertion into beta-sheet A

The serpin family of serine proteinase inhibitors is a mechanistically unique class of naturally occurring proteinase inhibitors that trap target enzymes as stable covalent acyl-enzyme complexes. This mechanism appears to require both cleavage of the serpin reactive center loop (RCL) by the proteinase and a significant conformational change in the serpin structure involving rapid insertion of the RCL into the center of an existing beta-sheet, serpin beta-sheet A. The present study demonstrates that partitioning between inhibitor and substrate modes of reaction can be altered by varying either the rates of RCL insertion or deacylation using a library of serpin RCL mutants substituted in the critical P(14) hinge residue and three different proteinases. We further correlate the changes in partitioning with the actual rates of RCL insertion for several of the variants upon reaction with the different proteinases as determined by fluorescence spectroscopy of specific RCL-labeled inhibitor mutants. These data demonstrate that the serpin mechanism follows a branched pathway, and that the formation of a stable inhibited complex is dependent upon both the rate of the RCL conformational change and the rate of enzyme deacylation.     

Structure and function of corticosteroid-binding globulin: Role of carbohydrates

To study the site-specificity of human corticosteroid-binding globulin (CBG) glycosylation and the functional significance of individual carbohydrate chains in its molecule, a panel of recombinant CBG mutants containing each of the six potential glycosylation sites alone and in various combinations has been expressed in Chinese hamster ovary (CHO) cells. Analyses of these mutant glycoproteins showed that three of the glycosylation sites are only partially utilized, and this may contribute to the production of glycoforms with distinct physiological functions. Processing of individual carbohydrate chains (branching and fucosylation) is site-specific and may, thus, account for the formation of structural determinants essential for the recognition of CBG by cell membranes. Glycosylation at the only phylogenetically conserved consensus site, Asn²³⁸-Gly²³⁹-Thr²⁴⁰, is essential for the biosynthesis of CBG with steroid-binding activity. Evidence has been obtained to support the hypothesis that transient carbohydrate-polypeptide interactions between Trp²⁶⁶ and the maturing carbohydrate chain at Asn²³⁸ occur during early stages of the CBG biosynthesis which affect protein folding and formation of the steroid-binding site. Another tryptophan residue, Trp³⁷¹, has been found to be critical for CBG-steroid interactions and is likely located in the steroid-binding site.     

The structure of active serpin 1K from Manduca sexta.

BACKGROUND: The reactive center loops (RCL) of serpins undergo large conformational changes triggered by the interaction with their target protease. Available crystallographic data suggest that the serpin RCL is polymorphic, but the relevance of the observed conformations to the competent active structure and the conformational changes that occur on binding target protease has remained obscure. New high-resolution data on an active serpin, serpin 1K from the moth hornworm Manduca sexta, provide insights into how active serpins are stabilized and how conformational changes are induced by protease binding. RESULTS: The 2.1 A structure shows that the RCL of serpin 1K, like that of active alpha1-antitrypsin, is canonical, complimentary and ready to bind to the target protease between P3 and P3 (where P refers to standard protease nomenclature),. In the hinge region (P17-P13), however, the RCL of serpin 1K, like ovalbumin and alpha1-antichymotrypsin, forms tight interactions that stabilize the five-stranded closed form of betasheet A. These interactions are not present in, and are not compatible with, the observed structure of active alpha1-antitrypsin. CONCLUSIONS: Serpin 1K may represent the best resting conformation for serpins - canonical near P1, but stabilized in the closed conformation of betasheet A. By comparison with other active serpins, especially alpha1-antitrypsin, a model is proposed in which interaction with the target protease near P1 leads to conformational changes in betasheet A of the serpin.     

The crystal structure of plasminogen activator inhibitor 2 at 2.0 A resolution: implications for serpin function.

BACKGROUND: Plasminogen activator inhibitor 2 (PAI-2) is a member of the serpin family of protease inhibitors that function via a dramatic structural change from a native, stressed state to a relaxed form. This transition is mediated by a segment of the serpin termed the reactive centre loop (RCL); the RCL is cleaved on interaction with the protease and becomes inserted into betasheet A of the serpin. Major questions remain as to what factors facilitate this transition and how they relate to protease inhibition. RESULTS: The crystal structure of a mutant form of human PAI-2 in the stressed state has been determined at 2.0 A resolution. The RCL is completely disordered in the structure. An examination of polar residues that are highly conserved across all serpins identifies functionally important regions. A buried polar cluster beneath betasheet A (the so-called 'shutter' region) is found to stabilise both the stressed and relaxed forms via a rearrangement of hydrogen bonds. CONCLUSIONS: A statistical analysis of interstrand interactions indicated that the shutter region can be used to discriminate between inhibitory and non-inhibitory serpins. This analysis implied that insertion of the RCL into betasheet A up to residue P8 is important for protease inhibition and hence the structure of the complex formed between the serpin and the target protease.     

Formation of the covalent chymotrypsin.antichymotrypsin complex involves no large-scale movement of the enzyme

alpha(1)-Antichymotrypsin is a member of the serine proteinase inhibitor, or serpin, family that typically forms very long-lived, enzymatically inactive 1:1 complexes (denoted E*I*) with its target proteinases. Serpins share a conserved tertiary structure, in which an exposed region of amino acid residues (called the reactive center loop or RCL) acts as bait for a target proteinase. Within E*I*, the two proteins are linked covalently as a result of nucleophilic attack by Ser(195) of the serine proteinase on the P1 residue within the RCL of the serpin. This species is formally similar to the acyl enzyme species normally seen as an intermediate in serpin proteinase catalysis. However, its subsequent hydrolysis is extremely slow as a result of structural changes within the enzyme leading to distortion of the active site. There is at present an ongoing debate concerning the structure of the E*I* complex; in particular, as to whether the enzyme, bound to P1, maintains its original position at the top of the serpin molecule or instead translocates across the entire length of the serpin, with concomitant insertion of RCL residues P1-P14 within beta-sheet A and a large separation of the enzyme and RCL residue P1'. We report time-resolved fluorescence energy transfer and rapid mixing/quench studies that support the former model. Our results indicate that the distance between residue P1' in alpha(1)-antichymotrypsin and the amino terminus of chymotrypsin actually decreases on conversion of the encounter complex E.I to E*I*. These results led us to formulate a comprehensive mechanism that accounted both for our results and for those of others supporting the two different E*I* structures. In this mechanism, partial insertion of the RCL, with no large perturbation of the P1' enzyme distance, is followed by covalent acyl enzyme formation. Full insertion can subsequently take place, in a reversible fashion, with the position of equilibrium between the partially and fully inserted complexes depending on the particular serpin-proteinase pair under consideration.     

A homologous radioimmunoassay for guinea pig corticosteroid-binding globulin

A rapid, specific, and sensitive (requiring only 20 fmole of antigen equivalent to 0.007 microliter of serum) radioimmunoassay (RIA) was developed for the measurement of guinea pig corticosteroid-binding globulin (CBG). CBG was purified to homogeneity from guinea pig serum by affinity chromatography and used for immunization, as the standard and as the radiolabeled trace in the RIA. The antiserum to CBG was raised in rabbits. It was judged specific by immunoelectrophoresis and by comparison of RIA values with steroid-binding assay profiles obtained on serum separated on the basis of size and ion-exchange properties. The results of the radioimmunoassays agree with those of a steroid-binding assay run on identical samples. The sensitivity of the assay allows detection of CBG in serial serum samples, other biologic fluids such as milk, and cell culture supernatants.     

Plasma variation of corticosteroid-binding globulin and sex hormone-binding globulin.

Sex hormone-binding globulin (SHBG) and corticosteroid-binding globulin (CBG) circulate in plasma and bind their cognate ligands with high affinity, offering a steroid delivery system to target tissues by a variety of mechanisms. Analysis of these steroid-binding proteins is gaining importance in the clinical setting, although more information is warranted on their diurnal and biological variation. This study shows that plasma SHBG (in normal subjects) exhibits little diurnal or biological variation over the 30 day period studied, in contrast to CBG, where plasma levels peak in the early afternoon. This leads to attenuation of the diurnal free cortisol level rhythm compared to total cortisol. We also show that plasma CBG is significantly lower in male subjects with the metabolic syndrome compared to age-matched lean counterparts, and may therefore act as a surrogate marker of insulin resistance. The consequence of lower levels of CBG in these obese male subjects is reflected by higher levels of circulating free cortisol, potentially offering a more favourable environment for adipogenesis.     

The development of an enzyme-linked immunosorbent assay for the determination of cortisol binding globulin.

A simple, reliable and reproducible enzyme-linked immunosorbent assay (ELISA) using polyclonal antibodies for human cortisol binding globulin (CBG) has been developed. The sensitivity of the ELISA (1.20 fmol CBG/well) compared favourably with the sensitivity of other immunoassays. The excellent agreement (r= 0.98) seen between the present study and a binding assay indicates that the polyclonal antibodies used recognize only intact steroid-binding CBG. The intra- and inter-assay coefficient of variation (4.0% and 7.1% respectively) compared favourably with those reported by other authors.     

The allosteric modulation of thyroxine-binding globulin affinity is entropy driven

Background

Thyroxine-binding globulin (TBG) is a non-inhibitory member of the serpin family of proteins whose main structural element is the reactive center loop (RCL), that, upon cleavage by proteases, is inserted into the protein core adopting a β-strand conformation (stressed to relaxed transition, S-to-R). After S-to-R transition thyroxine (T4) affinity decreases. However, crystallographic studies in the presence or absence of the hormone in different states are unable to show significant differences in the structure and interactions of the binding site. Experimental results also suggest the existence of several S states (differing in the number of inserted RCL residues), associated with a differential affinity.

Methods

To shed light into the molecular basis that regulates T4 affinity according to the degree of RCL insertion in TBG, we performed extended molecular dynamics simulations combined with several thermodynamic analysis of the T4 binding to TBG in three different S states, and in the R state.

Results

Our results show that, despite T4 binding in the protein by similar interactions in all states, a good correlation between the degree of RCL insertion and the binding affinity, driven by a change in TBG conformational entropy, was observed.

Conclusion

TBG allosteric regulation is entropy driven. The presence of multiple S states may allow more efficient T4 release due to protease activity.

General significance

The presented results are clear examples of how computer simulation methods can reveal the thermodynamic basis of allosteric effects, and provide a general framework for understanding serpin allosteric affinity regulation.     

Specific steroid-binding glycoproteins of human blood plasma: novel data on their structure and function

In this review, the modern data on the polypeptide and carbohydrate structures of human corticosteroid-binding globulin (CBG) and sex hormone-binding globulin (SHBG) as well as on the biochemical properties and biological functions of these steroid-binding glycoproteins are discussed.     

The murine orthologue of human antichymotrypsin: a structural paradigm for clade A3 serpins

Antichymotrypsin (SERPINA3) is a widely expressed member of the serpin superfamily, required for the regulation of leukocyte proteases released during an inflammatory response and with a permissive role in the development of amyloid encephalopathy. Despite its biological significance, there is at present no available structure of this serpin in its native, inhibitory state. We present here the first fully refined structure of a murine antichymotrypsin orthologue to 2.1 A, which we propose as a template for other antichymotrypsin-like serpins. A most unexpected feature of the structure of murine serpina3n is that it reveals the reactive center loop (RCL) to be partially inserted into the A beta-sheet, a structural motif associated with ligand-dependent activation in other serpins. The RCL is, in addition, stabilized by salt bridges, and its plane is oriented at 90 degrees to the RCL of antitrypsin. A biochemical and biophysical analysis of this serpin demonstrates that it is a fast and efficient inhibitor of human leukocyte elastase (ka: 4 +/- 0.9 x 10(6) m(-1) s(-)1) and cathepsin G (ka: 7.9 +/- 0.9 x 10(5) m(-1) s(-)1) giving a spectrum of activity intermediate between that of human antichymotrypsin and human antitrypsin. An evolutionary analysis reveals that residues subject to positive selection and that have contributed to the diversity of sequences in this sub-branch (A3) of the serpin superfamily are essentially restricted to the P4-P6' region of the RCL, the distal hinge, and the loop between strands 4B and 5B.     

Interaction between the P14 residue and strand 2 of beta-sheet B is critical for reactive center loop insertion in plasminogen activator inhibitor-2

The molecular interactions driving reactive center loop (RCL) insertion are of considerable interest in gaining a better understanding of the serpin inhibitory mechanism. Previous studies have suggested that interactions in the proximal hinge/breach region may be critical determinants of RCL insertion in serpins. In this study, conformational and functional changes in plasminogen activator inhibitor-2 (PAI-2) following incubation with a panel of synthetic RCL peptides indicated that the P14 residue is critical for RCL insertion, and hence inhibitory activity, in PAI-2. Only RCL peptides with a P14 threonine were able to induce the stressed to relaxed transition and abolish inhibitory activity in PAI-2, indicating that RCL insertion into beta-sheet A of PAI-2 is dependent upon this residue. The recently solved crystal structure of relaxed PAI-2 (PAI-2.RCL peptide complex) allowed detailed analysis of molecular interactions involving P14 related to RCL insertion. Of most interest is the rearrangement of hydrogen bonding around the breach region that accompanies the stressed to relaxed transition, in particular the formation of a side chain hydrogen bond between the threonine at P14 and an adjacent tyrosine on strand 2 of beta-sheet B in relaxed PAI-2. Structural alignment of known serpin sequences showed that this pairing (or the equivalent serine/threonine pairing) is highly conserved ( approximately 87%) in inhibitory serpins and may represent a general structural basis for serpin inhibitory activity.     

The length of the reactive center loop modulates the latency transition of plasminogen activator inhibitor-1

Plasminogen activator inhibitor-1 (PAI-1) belongs to the serine protease inhibitor (serpin) protein family, which has a common tertiary structure consisting of three beta-sheets and several alpha-helices. Despite the similarity of its structure with those of other serpins, PAI-1 is unique in its conformational lability, which allows the conversion of the metastable active form to a more stable latent conformation under physiological conditions. For the conformational conversion to occur, the reactive center loop (RCL) of PAI-1 must be mobilized and inserted into the major beta-sheet, A sheet. In an effort to understand how the structural conversion is regulated in this conformationally labile serpin, we modulated the length of the RCL of PAI-1. We show that releasing the constraint on the RCL by extension of the loop facilitates a conformational transition of PAI-1 to a stable state. Biochemical data strongly suggest that the stabilization of the transformed conformation is owing to the insertion of the RCL into A beta-sheet, as in the known latent form. In contrast, reducing the loop length drastically retards the conformational change. The results clearly show that the constraint on the RCL is a factor that regulates the conformational transition of PAI-1.     

Mapping of the epitope of a monoclonal antibody protecting plasminogen activator inhibitor-1 against inactivating agents.

Plasminogen activator inhibitor-1 (PAI-1) belongs to the serpin family of serine proteinase inhibitors. Serpins inhibit their target proteinases by an ester bond being formed between the active site serine of the proteinase and the P1 residue of the reactive centre loop (RCL) of the serpin, followed by insertion of the RCL into beta-sheet A of the serpin. Concomitantly, there are conformational changes in the flexible joint region lateral to beta-sheet A. We have now, by site-directed mutagenesis, mapped the epitope for a monoclonal antibody, which protects the inhibitory activity of PAI-1 against inactivation by a variety of agents acting on beta-sheet A and the flexible joint region. Curiously, the epitope is localized in alpha-helix C and the loop connecting alpha-helix I and beta-strand 5A, on the side of PAI-1 opposite to beta-sheet A and distantly from the flexible joint region. By a combination of site-directed mutagenesis and antibody protection against an inactivating organochemical ligand, we were able to identify a residue involved in conferring the antibody-induced conformational change from the epitope to the rest of the molecule. We have thus provided evidence for communication between secondary structural elements not previously known to interact in serpins.     

Physical mapping of four serpin genes: alpha 1-antitrypsin, alpha 1-antichymotrypsin, corticosteroid-binding globulin, and protein C inhibitor, within a 280-kb region on chromosome I4q32.1.

Alpha 1-antitrypsin (alpha 1AT; protease inhibitor [PI] locus), alpha 1-antichymotrypsin (alpha 1ACT; AACT locus), corticosteroid-binding globulin (CBG; CBG locus), and protein C inhibitor (PCI; PCI locus) are members of the serine protease inhibitor (serpin) superfamily. A noncoding PI-like (PIL) gene has been located 12 kb 3' of the PI gene. The PI, PIL, and AACT loci have been localized to 14q32.1, the CBG locus has been localized to 14q31-14q32.1, and PCI has been mapped to chromosome 14. Genetic linkage analysis suggests tight linkage between PI and AACT. We have used pulsed-field gel electrophoresis to generate a physical map linking these five serpin genes. The order of the genetic loci is AACT/PCI-PI-PIL-CBG, with a maximum distance of about 220 kb between the AACT/PCI and PI genes. These genes form a PI cluster at 14q32.1, similar to that of the homologous genes on murine chromosome l2. The close proximity of these genes has implications for disease-association studies.     

Fluorescence correlation spectroscopic study of serpin depolymerization by computationally designed peptides

Members of the serine proteinase inhibitor (serpin) family play important roles in the inflammatory and coagulation cascades. Interaction of a serpin with its target proteinase induces a large conformational change, resulting in insertion of its reactive center loop (RCL) into the main body of the protein as a new strand within beta-sheet A. Intermolecular insertion of the RCL of one serpin molecule into the beta-sheet A of another leads to polymerization, a widespread phenomenon associated with a general class of diseases known as serpinopathies. Small peptides are known to modulate the polymerization process by binding within beta-sheet A. Here, we use fluorescence correlation spectroscopy (FCS) to probe the mechanism of peptide modulation of alpha(1)-antitrypsin (alpha(1)-AT) polymerization and depolymerization, and employ a statistical computationally-assisted design strategy (SCADS) to identify new tetrapeptides that modulate polymerization. Our results demonstrate that peptide-induced depolymerization takes place via a heterogeneous, multi-step process that begins with internal fragmentation of the polymer chain. One of the designed tetrapeptides is the most potent antitrypsin depolymerizer yet found.     

Crystal structure of human sex hormone-binding globulin: steroid transport by a laminin G-like domain

Human sex hormone-binding globulin (SHBG) transports sex steroids in blood and regulates their access to target tissues. In biological fluids, SHBG exists as a homodimer and each monomer comprises two laminin G-like domains (G domains). The crystal structure of the N-terminal G domain of SHBG in complex with 5alpha-dihydrotestosterone at 1.55 A resolution reveals both the architecture of the steroid-binding site and the quaternary structure of the dimer. We also show that G domains have jellyroll topology and are structurally related to pentraxin. In each SHBG monomer, the steroid intercalates into a hydrophobic pocket within the beta-sheet sandwich. The steroid and a 20 A distant calcium ion are not located at the dimer interface. Instead, two separate steroid-binding pockets and calcium-binding sites exist per dimer. The structure displays intriguing disorder for loop segment Pro130-Arg135. In all other jellyroll proteins, this loop is well ordered. If modelled accordingly, it covers the steroid-binding site and could thereby regulate access of ligands to the binding pocket.