PEGylation kinetics of recombinant hirudin and its application for the production of PEGylated HV2 species

A critical challenge of PEGylation is the production of the desired PEGylated protein form at a high yield. In this study, a kinetic model was constructed successfully to describe the PEGylation reaction of recombinant hirudin variant-2 (HV2) with monomethoxy-PEG-succinimidyl carbonate (mPEG-SC) by fitting the experimental data. Moreover, PEGylation reaction conditions were investigated using the established model and the corresponding experiments to determine the optimal condition to achieve the mono-PEG-HV2 at the desired yield. The model predictions agreed well with the experimental data. Several important process parameters (maximum theoretical yield of mono-PEG-HV2 (y_max), critical PEG/HV2 molar ratio (m_crit) and reaction time to achieve y_max (t_max)) and their mathematical equations were obtained to determine the optimum reaction conditions. Among reaction conditions affecting the PEGylation rates, pH and temperature displayed little effect on y_max, but y_max increased as PEG size increased. Optimal reaction condition to produce mono-PEG-HV2 was as follows: pH and temperature could vary in a certain range; whereas PEG/HV2 molar ratio should be slightly greater than m_crit and the reaction should be stopped at t_max. The results of this study indicate that the proposed reaction kinetic model can provide a possible mechanism interpretation for real PEGylation reactions and optimize efficiently the PEGylation step.     

Size-exclusion reaction chromatography (SERC): a new technique for protein PEGylation

A new, widely applicable process that combines reaction and separation in a single unit operation is described. The process, size-exclusion reaction chromatography (SERC), simultaneously allows control of the extent of reactions in which molecular size is altered and the separation of products and reactants. In SERC, a moving reaction zone is formed by injection of reactants onto a size-exclusion chromatography column. Reactants and products are partitioned differently within the mobile phase, resulting in different linear flow rates through the column. The products are therefore removed selectively from the reaction zone, minimizing their residence time in the reaction zone and allowing their separation in the downstream section of the column. For reactions such as protein PEGylation, in which successive addition of PEG groups to the protein results in significant molecular size increases, SERC potentially offers a method by which a dominant final PEGylated protein size can be produced at high yield. The SERC PEGylation of two model proteins, alpha-lactalbumin and beta-lactoglobulin, is demonstrated and results show that simultaneous reaction and separation was obtained.     

In situ PEGylation of recombinant hirudin on an anion exchange chromatography column

In this study, an integrated process was developed for successive solid-phase PEGylation of recombinant hirudin variant-2 (HV2) and separation of PEGylated HV2 species on an anion exchange chromatography column (so-called in situ PEGylation). The effects of different PEG sizes, ion exchange resins and reaction conditions on in situ PEGylation were investigated. The results showed that in situ PEGylation efficiently integrates the reaction, separation and purification into a single-unit operation using the same column. In situ PEGylation could improve the selectivity of PEGylation reactions by significantly reducing the formation of multi-PEG-HV2. The pore sizes and internal surface structures of different resins had a significant impact on the yield of mono-PEG-HV2. In contrast to liquid-phase PEGylation, the yield of mono-PEG-HV2 decreased as PEG size increased during the in situ PEGylation process, indicating that in situ PEGylation is a pore diffusion-controlled process. The in vitro and in vivo anticoagulant activities of mono-PEG-HV2 derived from in situ PEGylation were higher than those from liquid-phase PEGylation, indicating that in situ PEGylation could enhance the bioactivity retention of mono-PEG-HV2. The results of this study demonstrated that in situ PEGylation can be used as an effective approach for the development of PEGylated protein drugs.     

Synthesis of a New Tri-Branched PEG-IFNα2 and Its Impact on Anti Viral Bioactivity

Efficacy of proteins can be enhanced by using polyethylene glycol (PEG) conjugation (PEGylation) to the protein molecules. Mobile non-toxic PEG chains conjugated to bio-therapeutics increase their hydrodynamic volume and in turn can prolong their plasma retention time and increase their solubility. An important aspect of PEGylation is the selection of PEG molecule with suitable structure and molecular weight. In this study, conceiving the idea that branched PEG-conjugates show superior efficacy over the linear PEG-conjugates, a tri-branched PEG-interferon (mPEG₃L₂-IFN) was synthesized by reacting a 30 KDa tri-branched mPEG₃L₂-NHS reagent with IFN to improve its pharmacokinetic properties and reduce the loss of in vitro bioactivity (which is generally exhibited by PEGylation) of the conjugated protein to some extent. The PEGylation procedure was optimized in terms of concentration and molar ratios of reactants, reaction time, temperature and pH conditions of the reaction mix. The conjugate was purified by cation exchange chromatography and characterized by SDS-PAGE and SE-HPLC. Trypsin digestion of mPEG₃L₂-IFN indicated a single site specificity of PEGylation. Anti viral bioactivity of mPEG₃L₂-IFN was found to be 2.38 × 10⁷ IU/mg which is approximately 9.52% of native IFNα2 (2.5 × 10⁸ IU/mg) and better than PEGasys from Roche Pharma. Therefore, it is reported that the tri-branched mPEG₃L₂-NHS reagent has the potential to be used to conjugate proteins for the promising therapeutic results.     

Site-specific PEGylation for high-yield preparation of Lys(21)-amine PEGylated growth hormone-releasing factor (GRF) (1-29) using a GRF(1-29) derivative FMOC-protected at Tyr(1) and Lys(12)

PEGylation has been viewed as an effective means of overcoming the therapeutic restriction of growth hormone-releasing factor (1-29) (GRF(1-29)) due to its short biological lifetime caused by severe proteolysis and rapid glomerular filtration. Of three isomers according to the PEGylation sites (Tyr1, Lys12, or Lys21), PEGylated GRF(1-29) at Lys21-amine (Lys21-PEG-GRF(1-29)) was shown to have the highest bioactivity. In this report, we propose a unique two-step site-specific PEGylation method capable of producing only Lys21-PEG-GRF(1-29) with a single composition in high yield using a GRF(1-29) derivative protected at Tyr1 and Lys12 and remained available at Lys21 (FMOC1,12-GRF(1-29)). The first step of this reaction involved the PEG attachment to FMOC1,12-GRF(1-29), and the second step involved the removal of FMOC moieties. This PEGylation process was optimized at the following conditions: 0.2-0.3% (v/v) triethylamine concentration, 5.0-6.0-fold molar amount of PEG, reaction temperature of 25-45 degrees C, and reaction time of 30 min. Under these conditions, the maximum yield of Lys21-PEG-GRF(1-29) produced was ca. approximately 95%, 6.3-fold higher than that by nonspecific PEGylation at pH 8.5. Significantly, this site-specific Lys21-PEG-GRF(1-29) was found to have greatly increased resistance to rat plasma, liver, and kidney homogenates, with 7.0-, 25.4-, and 16.4-fold longer half-lives vs GRF(1-29), respectively. Furthermore, 125I-Lys21-PEG-GRF(1-29) displayed significantly reduced liver and kidney distributions and extended blood presence vs 125I-GRF(1-29) in rats. Due to these benefits, Lys21-PEG-GRF(1-29) displayed an enhanced initial growth hormone release in vivo despite having 15% remaining activity in vitro. This devised PEGylation method using an FMOC-protection/deprotection strategy would provide great usefulness for PEGylating bioactive peptides in terms of improved biological potency, elevated production yield, and a uniform composition.     

微生物来源的谷氨酰胺转氨酶(mTG)介导的单一定点修饰的PEG IFN-α2a(英文)

PEG修饰被认为是改善重组蛋白药物特性的最有效手段,包括增加蛋白质药物在体内的血浆半衰期,降低免疫原性和抗原性。目前典型的PEG修饰手段为将PEG连接至蛋白质的游离氨基,包括赖氨酸和N-末端,但这种连接缺乏选择性,产物为混合物,活性及工艺稳定性差,难以控制。酶法PEG化修饰能有效克服上述缺点,其中谷氨酰胺转氨酶(TGase)可以作为PEG化定点修饰用酶。文中选择重组人干扰素α2a(IFNα2a)进行酶法修饰反应,通过计算机模拟预测IFNα2a可以在第101位Gln特异性定点修饰。将IFNα2a与40 kDa的Y型PEG在微生物来源的谷氨酰胺转氨酶(mTG)催化下进行定点PEG化修饰。结果显示,mTG可以介导IFNα2a特异性位点Gln的单一定点PEG修饰,产生分子量为58 495.6 Da的PEG-Gln101-IFNα2a分子。圆二色谱结果显示,PEG-Gln101-IFNα2a与未修饰的IFNα2a具有相同的二级结构。SD大鼠药代结果显示,与IFNα2a相比,PEG-Gln101-IFNα2a能有效提高药代动力学参数,强于已上市PEGIFNα2a-PEGASYS?。     

Optimization of PEGylation Conditions for BSA Nanoparticles Using Response Surface Methodology

Chemical coupling of polyethylene glycol (PEG) to proteins or particles (PEGylation), prolongs their circulation half-life by greater than 50-fold, reduces their immunogenicity, and also promotes their accumulation in tumors due to enhanced permeability and retention effect. Herein, phase separation method was used to prepare bovine serum albumin (BSA) nanoparticles. PEGylation of BSA nanoparticles was performed by SPA activated mPEG through their free amino groups. Effect of process variables on PEGylation efficiency of BSA nanoparticles was investigated and optimized through response surface methodology with the amount of free amino groups as response. Optimum conditions was found to be 32.5 g/l of PEG concentration, PEG-nanoparticle incubation time of 10 min, incubation temperature of 27°C, and pH of 7 for 5 mg of BSA nanoparticles in 1 mL phosphate buffer. Analysis of data showed that PEG concentration had the most noticeable effect on the amount of PEGylated amino groups, but pH had the least. Mean diameter and zeta potential of PEGylated nanoparticles under these conditions were 217 nm and −14 mV, respectively. In conclusion, PEGylated nanoparticles demonstrated reduction of the negative surface charge compared to the non modified particles with the zeta potential of −31.7 mV. Drug release from PEGylated nanoparticles was almost slower than non-PEGylated ones, probably due to existence of a PEG layer around PEGylated particles which makes an extra resistance in opposition to drug diffusion.     

Stabilization of a supplemental digestive enzyme by post-translational engineering using chemically-activated polyethylene glycol

Many enzymes used as digestive aids exhibit, at best, moderate stability when incubated under gastrointestinal conditions. A supplemental β-galactosidase administered orally to treat lactose intolerance was conjugated to 40 kDa, branched polyethylene glycol (PEG). PEGylation increased the enzyme's relative activity at lower pH values (2.5-4.5) and doubled enzyme stability at pH 2.5. The PEGylated enzyme retained significantly more residual activity after exposure to simulated gastric conditions (52% versus 31%), a consequence of protection from both pepsin and low pH mediated inactivation. Conjugation also provided significant protection against the proteolytic component of pancreatin. Overall, the PEGylated enzyme retained over twice the levels of residual activity recorded for non-PEGylated enzyme after exposure to complete simulated gastrointestinal conditions. PEGylation also marginally improved the enzyme's kinetic characteristics. When using its physiological substrate (lactose), K(m) values recorded were slightly decreased (from 83 to 60 μM) and k(cat)/K(m) values (M(-1) s(-1)) were increased from 100 to 147. This appears to be the first report of the use of a conjugated PEG to stabilize a digestive enzyme and the first report of the ability of conjugated PEG to stabilize a protein at low pH.     

Synthesis, characterization, and pharmacokinetic studies of PEGylated glucagon-like peptide-1

Glucagon-like peptide-1-(7-36) (GLP-1) is a hormone derived from the proglucagon molecule, which is considered a highly desirable antidiabetic agent mainly due to its unique glucose-dependent stimulation of insulin secretion profiles. However, the development of a GLP-1-based pharmaceutical agent has a severe limitation due to its very short half-life in plasma, being primarily degraded by dipeptidyl peptidase IV (DPP-IV) enzyme. To overcome this limitation, in this article we propose a novel and potent DPP-IV-resistant form of a poly(ethylene glycol)-conjugated GLP-1 preparation and its pharmacokinetic evaluation in rats. Two series of mono-PEGylated GLP-1, (i) N-terminally modified PEG(2k)-N(ter)-GLP-1 and (ii) isomers of Lys(26), Lys(34) modified PEG(2k)-Lys-GLP-1, were prepared by using mPEG-aldehyde and mPEG-succinimidyl propionate, respectively. To determine the optimized condition for PEGylation, the reactions were monitored at different pH buffer and time intervals by RP-HPLC and MALDI-TOF-MS. The in vitro insulinotropic effect of PEG(2k)-Lys-GLP-1 showed comparable biological activity with native GLP-1 (P = 0.11) in stimulating insulin secretion in isolated rat pancreatic islet and was significantly more potent than the PEG(2k)-N(ter)-GLP-1 (P < 0.05) that showed a marked reduced potency. Furthermore, PEG(2k)-Lys-GLP-1 was clearly resistant to purified DPP-IV in buffer with 50-fold increased half-life compared to unmodified GLP-1. When PEG(2k)-Lys-GLP-1 was administered intravenously and subcutaneously into rats, PEGylation improved the half-life, which resulted in substantial improvement of the mean plasma residence time as a 16-fold increase for iv and a 3.2-fold increase for sc. These preliminary results suggest a site specifically mono-PEGylated GLP-1 greatly improved the pharmacological profiles; thus, we anticipated that it could serve as potential candidate as an antidiabetic agent for the treatment of non-insulin-dependent diabetes patients.     

Phenol removal from aqueous solutions by peroxidase extracted from horseradish

Horseradish peroxidase (HRP) is one of the most recently used enzymes in the process of enzymatic phenol removal. It has a catalytic ability over a broad range of pH, temperature and contaminant concentrations. In this study we revealed the possibility of successful use the crude peroxidase obtained from horseradish roots for the phenol removal from aqueous solutions in the presence of the low molecular polyethylene glycol (PEG 300) at room temperature (20°C) and pH 7.2. Reaction was monitored by direct measuring of the absorbance changes in a samples taken at certain time intervals from the reaction mixture. At the first time PEG 300 was shown to be a more stabilizing effect on crude HRP and provided a higher phenol removal in comparison with PEG 3350. Crude HRP used in these study demonstrated a greater resistance on phenol and hydrogen peroxide inactivation that allowed a higher phenol removal. The highest phenol removal was achieved when the concentration of PEG 300, phenol and hydrogen peroxide were 300 mg/L, 2.0 and 2.5 mM, respectively.     

PEGylation of native disulfide bonds in proteins

PEGylation has turned proteins into important new biopharmaceuticals. The fundamental problems with the existing approaches to PEGylation are inefficient conjugation and the formation of heterogeneous mixtures. This is because poly(ethylene glycol) (PEG) is usually conjugated to nucleophilic amine residues. Our PEGylation protocol solves these problems by exploiting the chemical reactivity of both of the sulfur atoms in the disulfide bond of many biologically relevant proteins. An accessible disulfide bond is mildly reduced to liberate the two cysteine sulfur atoms without disturbing the protein's tertiary structure. Site-specific PEGylation is achieved with a bis-thiol alkylating PEG reagent that sequentially undergoes conjugation to form a three-carbon bridge. The two sulfur atoms are re-linked with PEG selectively conjugated to the bridge. PEGylation of a protein can be completed in 24 h and purification of the PEG-protein conjugate in another 3 h. We have successfully applied this approach to PEGylation of cytokines, enzymes, antibody fragments and peptides, without destroying their tertiary structure or abolishing their biological activity.     

A method to optimize PEG-coating of red blood cells

Alloimmunization to donor blood group antigens remains a significant problem in transfusion medicine. A proposed method to overcome donor-recipient blood group incompatibility is to mask the blood group antigens by the covalent attachment of poly(ethylene glycol) (PEG) to the red blood cell (RBC) membrane. Despite much work in the development of PEG-coating of RBCs, there is a paucity of data on the optimization of the PEG-coating technique; it is the aim of this study to determine the optimum conditions for PEG coating using a cyanuric chloride reactive derivative of methoxy-PEG as a model polymer. Activated PEG of molecular mass 5 kDa was covalently attached to human RBCs under various reaction conditions. Inhibition of binding of a blood-type specific antiserum (anti-D) was employed to evaluate the effect of the PEG-coating, quantified by hemocytometry and flow-cytometry. RBC morphology was examined by light and scanning electron microscopy. Statistical analysis of experimental design together with microscopy results showed that the optimum PEGylation conditions are pH = 8.7, temperature = 14 degrees C, and reaction time = 30 min. An optimum concentration of reactive PEG could not be determined. At high polymer concentrations (>25 mg/mL) a predominance of type III echinocytes was observed, and as a result, a concentration of 15 mg/mL is the highest recommended concentration for a linear PEG of molecular mass 5 kDa.     

PEG chain length impacts yield of solid-phase protein PEGylation and efficiency of PEGylated protein separation by ion-exchange chromatography: Insights of mechanistic models

The mechanisms behind protein PEGylation are complex and dictated by the structure of the protein reactant. Hence, it is difficult to design a reaction process which can produce the desired PEGylated form at high yield. Likewise, efficient purification processes following protein PEGylation must be constructed on an ad hoc basis for each product. The retention and binding mechanisms driving electrostatic interaction-based chromatography (ion-exchange chromatography) of PEGylated proteins (randomly PEGylated lysozyme and mono-PEGylated bovine serum albumin) were investigated, based on our previously developed model Chem. Eng. Technol. 2005, 28, 1387–1393. PEGylation of each protein resulted in a shift to a smaller elution volume compared to the unmodified molecule, but did not affect the number of binding sites appreciably. The shift of the retention volume of PEGylated proteins correlated with the calculated thickness of PEG layer around the protein molecule. Random PEGylation was carried out on a column (solid-phase PEGylation) and the PEGylated proteins were separated on the same column. Solid-phase PEGylation inhibited the production of multi-PEGylated forms and resulted in a relatively low yield of selective mono-PEGylated form. Pore diffusion may play an important role in solid-phase PEGylation. These results suggest the possibility of a reaction and purification process development based on the mechanistic model for PEGylated proteins on ion exchange chromatography.     

Screening of Reducing Agents for the PEGylation of Recombinant Human IL-10

PEGylation is a technology commonly used to enhance the bioavailability of therapeutic proteins in patients. Reductive alkylation of a protein amino terminal alpha amine in the presence of a polyethylene glycol (PEG) chain derivatized with propionaldehyde and a reducing agent, typically sodium cyanoborohydride, is one of the technologies available to achieve quantitative and site specific PEGylation. While cyanoborohydride has proven to be a robust and efficient reagent for this type of reaction, it generates aqueous cyanide as a reaction by-product (and its corollary, the very volatile hydrogen cyanide). We report here the screening of reducing agents such as dimethylamine borane, trimethylamine borane, triethylamine borane, tert-butylamine borane, morpholine borane, pyridine borane, 2-picoline borane, and 5-ethyl-2-methyl-pyridine borane as alternatives to cyanoborohydride for the PEGylation of recombinant human IL-10. The results of our study show that pyridine borane and 2-picoline borane promote rhIL-10 PEGylation at levels comparable to those observed with cyanoborohydride.     

A magnetic adsorbent-based process for semi-continuous PEGylation of proteins

A semi-continuous magnetic particle-based process for the controlled attachment of PEG (PEGylation) to proteins is described for the first time. Trypsin and 2 kDa mono-activated PEG were used to systematically develop the steps in the process. Proof of concept was shown in a microfluidics system to minimize reagent consumption. Two streams containing (i) 1.2 g/L trypsin and (ii) 4 g/L magnetic adsorbents derivatized with the reversible affinity ligand benzamidine were pumped into a pipe reactor. At the exit, a third solution of activated PEG (0-40 g/L) was introduced and the solutions immediately fed into a second reactor. Upon exiting, the mixture was combined in a third reactor with a fourth stream of free amine groups to stop the reaction (50 mM lysine). The mixture continued into a high-gradient magnetic separator where magnetic supports, with PEGylated trypsin still attached, were captured and washing and elution steps were subsequently carried out. Analysis of the conjugates (with SDS-PAGE & LC-MS) showed that the extent of PEGylation could be controlled by varying the reaction time or PEG concentration. Furthermore, the PEG-conjugates had higher enzyme activity compared to PEGylation of non-immobilized trypsin.     

Solid-phase N-terminus PEGylation of recombinant human fibroblast growth factor 2 on heparin-sepharose column

Recombinant fibroblast growth factor-2 (FGF-2) has been extensively studied and used in several clinical applications including wound healing, bone regeneration, and neuroprotection. Poly(ethylene glycol) (PEG) modification of recombinant human FGF-2 (rhFGF-2) in solution phase has been studied to increase the in vivo biostabilities and therapeutic potency. However, the solution-phase strategy is not site-controlled and the products are often not homogeneous due to the generation of multi-PEGylated proteins. In order to increase mono-PEGylated rhFGF-2 level, a novel solid-phase strategy for rhFGF-2 PEGylation is developed. RhFGF-2 proteins were loaded onto a heparin-sepharose column and the PEGylaton reaction was carried out at the N-terminus by PEG20 kDa butyraldehyde through reductive alkylation. The PEGylated rhFGF-2 was purified to near homogeneity by SP sepharose anion-exchange chromatography and the purity was more than 95% with a yield of mono-PEGylated rhFGF-2 of 58.3%, as confirmed by N-terminal sequencing and MALDI-TOF mass spectrometry. In vitro biophysical and biochemical measurements demonstrated that PEGylated rhFGF-2 has an unchanged secondary structure, receptor binding activity, cell proliferation, and MAP kinase stimulating activity, and an improved bio- and thermal stability. Animal assay showed that PEGylated rhFGF-2 has an increased half-life and reduced immunogenicity. Compared to conventional solution-phase PEGylation, the solid-phase PEGylation is advantageous in reaction time, production of mono-PEGylated protein, and improvement of biochemical and biological activity.     

聚乙二醇定点修饰蛋白质药物的技术和临床研究进展

聚乙二醇(PEG)定点修饰蛋白药物是针对蛋白特定基团特定位点的修饰,相比于非定点随机修饰的特点是PEG修饰位点的单一与确定,避免了修饰异构体的干扰,能较好的保留药物体内外活性;修饰产物组成均一、性质稳定,便于质量控制,降低由修饰异构体引起的潜在的安全性风险,并很大程度上提高得率,降低成本。已有PEG定点修饰蛋白药物上市,还有部分处于临床试验阶段。本文综述了PEG定点修饰蛋白药物的技术研究与临床进展,包括PEG定点修饰剂、定点修饰方法、PEG定点修饰的上市和临床药物及面临的问题,并展望了PEG修饰技术未来的发展前景。     

In vitro refolding of PEGylated lipase

Covalent modification of proteins with polyethylene glycol (PEG) has become a well established drug enhancement strategy in the biopharmaceutical industry. The general benefits of PEGylation, such as prolonged serum half-lives or reduced in vivo immunogenicity, are well known. To date, the PEGylation process has been performed with purified proteins, which often requires additional multi-step purification steps to harvest the desired PEGylate. However, it would be beneficial for bioprocessing if 'renaturation,' i.e. in vitro refolding and 'modification,' and PEGylation can be integrated, especially for inclusion body proteins. We investigated the feasibility of protein PEGylation under denaturing conditions and of protein refolding with the attached PEG molecule. Using lipase as a model protein, PEGylation occurred in 8 M urea and covalently attached PEG did not appear to hinder subsequent refolding.     

INACTIVATION OF CRYSTALLINE TRYPSIN

1. The rate of inactivation of crystalline trypsin solutions and the nature of the products formed during the inactivation at various pH at temperatures below 37°C. have been studied. 2. The inactivation may be reversible or irreversible. Reversible inactivation is accompanied by the formation of reversibly denatured protein. This denatured protein exists in equilibrium with the native active protein and the equilibrium is shifted towards the denatured form by raising the temperature or by increasing the alkalinity. The decrease in the fraction of active enzyme present (due to the formation of this reversibly denatured protein) as the pH is increased from 8.0 to 12.0 accounts for the decrease in the rate of digestion of proteins by trypsin in this range of pH. 3. The loss of activity at high temperatures or in alkaline solutions, just described, is very rapid and is completely reversible for a short time only. If the solutions are allowed to stand the loss in activity becomes gradually irreversible and is accompanied by the appearance of various reaction products the nature of which depends upon the temperature and pH of the solution. 4. On the acid side of pH 2.0 the trypsin protein is changed to an inactive form which is irreversibly denatured by heat. The course of the reaction in this range is monomolecular and its velocity increases as the acidity increases. 5. From pH 2.0 to 9.0 trypsin protein is slowly hydrolyzed. The course of the inactivation in this range of pH is bimolecular and its velocity increases as the alkalinity increases to pH 10.0 and then decreases. As a result of these two reactions there is a point of maximum stability at about pH 2.3. 6. On the alkaline side of pH 13.0 the reaction is similar to that in strong acid solution and consists in the formation of inactive protein. The course of the reaction is monomolecular and the velocity increases with increasing alkalinity. From pH 9.0 to 12.0 some hydrolysis takes place and some inactive protein is formed and the course of the reaction is represented by the sum of a bi- and monomolecular reaction. The rate of hydrolysis decreases as the solution becomes more alkaline than pH 10.0 while the rate of formation of inactive protein increases so that there is a second point at about pH 13.0 at which the rate of inactivation is a minimum. In general the decrease in activity under all these conditions is proportional to the decrease in the concentration of the trypsin protein. Equations have been derived which agree quantitatively with the various inactivation experiments.     

PEGylated protein separations: challenges and opportunities

PEGylation, the covalent attachment of polyethylene glycol (PEG) chains to protein, isa promising method for making an efficient protein drug. Several PEGylated protein drugs, such as PEGylated interferons, are already on the market and others are presently in their clinical trials. However, the PEGylation reaction is very product specific so that generalized or platform processes for both reaction and purification have not yet been established. In the current issue of Biotechnology Journal, Günter Allmaier and colleagues report a modified microchip capillary gel electrophoresis (MCGE), which allows for a rapid separation (one minute) of PEGylated proteins of different degrees of PEGylation.