Holographic microscopy provides new insights into the settlement of zoospores of the green alga Ulva linza on cationic oligopeptide surfaces

Interaction of zoospores of Ulva linza with cationic, arginine-rich oligopeptide self-assembled monolayers (SAMs) is characterized by rapid settlement. Some spores settle (ie permanently attach) in a ‘normal’ manner involving the secretion of a permanent adhesive, retraction of the flagella and cell wall formation, whilst others undergo ‘pseudosettlement’ whereby motile spores are trapped (attached) on the SAM surface without undergoing the normal metamorphosis into a settled spore. Holographic microscopy was used to record videos of swimming zoospores in the vicinity of surfaces with different cationic oligopeptide concentrations to provide time-resolved insights into processes associated with attachment of spores. The data reveal that spore attachment rate increases with increasing cationic peptide content. Accordingly, the decrease in swimming activity in the volume of seawater above the surface accelerated with increasing surface charge. Three-dimensional trajectories of individual swimming spores showed a ‘hit and stick’ motion pattern, exclusively observed for the arginine-rich peptide SAMs, whereby spores were immediately trapped upon contact with the surface.     

Use of self-assembled monolayers of different wettabilities to study surface selection and primary adhesion processes of green algal (Enteromorpha) zoospores

We investigated surface selection and adhesion of motile zoospores of a green, macrofouling alga (Enteromorpha) to self-assembled monolayers (SAMs) having a range of wettabilities. The SAMs were formed from alkyl thiols terminated with methyl (CH(3)) or hydroxyl (OH) groups or mixtures of CH(3)- and OH-terminated alkyl thiols and were characterized by measuring the advancing contact angles and by X-ray photoelectron spectroscopy. There was a positive correlation between the number of spores that attached to the SAMs and increasing contact angle (hydrophobicity). Moreover, the sizes of the spore groups (adjacent spores touching) were larger on the hydrophobic SAMs. Video microscopy of a patterned arrangement of SAMs showed that more zoospores were engaged in swimming and "searching" above the hydrophobic sectors than above the hydrophilic sectors, suggesting that the cells were able to "sense" that the hydrophobic surfaces were more favorable for settlement. The results are discussed in relation to the attachment of microorganisms to substrata having different wettabilities.     

Use of Self-Assembled Monolayers of Different Wettabilities To Study Surface Selection and Primary Adhesion Processes of Green Algal (Enteromorpha) Zoospores

We investigated surface selection and adhesion of motile zoospores of a green, macrofouling alga (Enteromorpha) to self-assembled monolayers (SAMs) having a range of wettabilities. The SAMs were formed from alkyl thiols terminated with methyl (CH₃) or hydroxyl (OH) groups or mixtures of CH₃- and OH-terminated alkyl thiols and were characterized by measuring the advancing contact angles and by X-ray photoelectron spectroscopy. There was a positive correlation between the number of spores that attached to the SAMs and increasing contact angle (hydrophobicity). Moreover, the sizes of the spore groups (adjacent spores touching) were larger on the hydrophobic SAMs. Video microscopy of a patterned arrangement of SAMs showed that more zoospores were engaged in swimming and “searching” above the hydrophobic sectors than above the hydrophilic sectors, suggesting that the cells were able to “sense” that the hydrophobic surfaces were more favorable for settlement. The results are discussed in relation to the attachment of microorganisms to substrata having different wettabilities.     

Antifouling properties of oligo(lactose)-based self-assembled monolayers

The antifouling (AF) properties of oligo(lactose)-based self-assembled monolayers (SAMs), using four different proteins, zoospores of the green alga Ulva linza and cells of the diatom Navicula incerta, were investigated. The SAM-forming alkylthiols, which contained 1, 2 or 3 lactose units, showed significant variation in AF properties, with no differences in wettability. Non-specific adsorption of albumin and pepsin was low on all surfaces. Adsorption of lysozyme and fibrinogen decreased with increasing number of lactose units in the SAM, in agreement with the generally observed phenomenon that thicker hydrated layers provide higher barriers to protein adsorption. Settlement of spores of U. linza followed an opposite trend, being greater on the bulkier, more hydrated SAMs. These SAMs are more ordered for the larger saccharide units, and it is therefore hypothesized that the degree of order, and differences in crystallinity or stiffness between the surfaces, is an important parameter regulating spore settlement on these surfaces.     

Effects of surface charge and Gibbs surface energy on the settlement behaviour of barnacle cyprids (Balanus amphitrite)

Gibbs surface energy has long been considered to be an important parameter in the design of fouling-resistant surfaces for marine applications. Rigorous testing of the hypothesis that settlement is related to Gibbs surface energy however has never been accomplished, due mainly to practical limitations imposed by the necessary combination of surface engineering and biological evaluation methods. In this article, the effects of surface charge and Gibbs surface energy on the settlement of cyprids of an important fouling barnacle, Balanus amphitrite, were evaluated. Settlement assays were conducted on a range of self-assembled monolayers (SAMs) (CH(3)-, OH-, COOH-, N(CH(3))(3) (+)-, NH(2)-terminated), presented in gold-coated polystyrene well plates, varying in terms of their surface charge and Gibbs surface energy. Contrary to contemporary theory, settlement was not increased by high-energy surfaces, rather the opposite was found to be the case with cyprids settling in greater numbers on a low-energy CH(3)- SAM compared to a high-energy OH- SAM. Settlement was also greater on negatively-charged SAMs, compared to neutral and positively-charged SAMs. These findings are discussed in the context of data drawn from surfaces that varied in multiple characteristics simultaneously, as have been used previously for such experiments. The finding that surface charge, rather than total surface energy, may be responsible for surface selection by cyprids, will have significant implications for the design of future fouling-resistant materials.     

Effects of surface charge and Gibbs surface energy on the settlement behaviour of barnacle cyprids (Balanus amphitrite)

Gibbs surface energy has long been considered to be an important parameter in the design of fouling-resistant surfaces for marine applications. Rigorous testing of the hypothesis that settlement is related to Gibbs surface energy however has never been accomplished, due mainly to practical limitations imposed by the necessary combination of surface engineering and biological evaluation methods. In this article, the effects of surface charge and Gibbs surface energy on the settlement of cyprids of an important fouling barnacle, Balanus amphitrite, were evaluated. Settlement assays were conducted on a range of self-assembled monolayers (SAMs) (CH₃-, OH-, COOH-, N(CH₃)₃ ⁺-, NH₂-terminated), presented in gold-coated polystyrene well plates, varying in terms of their surface charge and Gibbs surface energy. Contrary to contemporary theory, settlement was not increased by high-energy surfaces, rather the opposite was found to be the case with cyprids settling in greater numbers on a low-energy CH₃- SAM compared to a high-energy OH- SAM. Settlement was also greater on negatively-charged SAMs, compared to neutral and positively-charged SAMs. These findings are discussed in the context of data drawn from surfaces that varied in multiple characteristics simultaneously, as have been used previously for such experiments. The finding that surface charge, rather than total surface energy, may be responsible for surface selection by cyprids, will have significant implications for the design of future fouling-resistant materials.     

Correlation between surface chemistry and settlement behaviour in barnacle cyprids (Balanus improvisus)

In laboratory-based biofouling assays, the influence of physico-chemical surface characteristics on barnacle settlement has been tested most frequently using the model organism Balanus amphitrite (= Amphibalanus amphitrite). Very few studies have addressed the settlement preferences of other barnacle species, such as Balanus improvisus (= Amphibalanus improvisus). This study aimed to unravel the effects of surface physico-chemical cues, in particular surface-free energy (SFE) and surface charge, on the settlement of cyprids of B. improvisus. The use of well-defined surfaces under controlled conditions further facilitates comparison of the results with recent similar data for B. amphitrite. Zero-day-old cyprids of B. improvisus were exposed to a series of model surfaces, namely self-assembled monolayers (SAMs) of alkanethiols with varying end-groups, homogenously applied to gold-coated polystyrene (PS) Petri dishes. As with B. amphitrite, settlement of cyprids of B. improvisus was influenced by both SFE and charge, with higher settlement on low-energy (hydrophobic) surfaces and negatively charged SAMs. Positively charged SAMs resulted in low settlement, with intermediate settlement on neutral SAMs of similar SFE. In conclusion, it is demonstrated that despite previous suggestions to the contrary, these two species of barnacle show similar preferences in response to SFE; they also respond similarly to charge. These findings have positive implications for the development of novel antifouling (AF) coatings and support the importance of consistency in substratum choice for assays designed to compare surface preferences of fouling organisms.     

LIGHT BOUNDARIES AND THE COUPLED EFFECTS OF SURFACE HYDROPHOBICITY AND LIGHT ON SPORE SETTLEMENT IN THE BROWN ALGA HINCKSIA IRREGULARIS (PHAEOPHYCEAE) 1

We examined the effects of light and surface hydrophobicity individually and in tandem on Hincksia irregularis (Kützing) Amsler spore settlement. Hincksia irregularis spores were determined to be negatively phototactic by the use of computer‐assisted motion analysis. Spore settlement was significantly influenced by surface hydrophobicity and by light, individually and in tandem. Experiments conducted using culture plates modified to reduce well edge artifacts revealed significantly higher settlement on hydrophobic surfaces and in dark environments when compared with negatively charged surfaces and lighted environments. Experimental light/dark boundaries elicited distinct spore settlement responses, with spores displaying dissimilar settlement patterns on plates with different surface hydrophobicities. The results of this study indicate H. irregularis spores possess the capacity for complex responses to their environment. These complex responses may influence dispersal and aid spores in the detection of suitable settlement locations in marine microenvironments.     

Individual and coupled effects of echinoderm extracts and surface hydrophobicity on spore settlement and germination in the brown alga Hincksia irregularis

Marine substrata possess cues that influence the behavior of fouling organisms. Initial adhesion of fouling algal zoospores to surfaces is also theorized to depend primarily upon interactions between substrata and spore cell bodies and flagellar membranes. In an effort to identify cues and surface characteristics that influence spore settlement and early development, the effects of bioactive echinoderm extracts, surface charge, and surface hydrophobicity were examined individually and in tandem on zoospore settlement and germination in Hincksia irregularis. Experiments utilizing 96-well plastic culture plates confirmed that spore settlement and germination were significantly affected by surface charge and hydrophobicity as well as by echinoderm metabolites, both individually and in tandem. Spore settlement rates in the dark over 30 min were > 400% higher on hydrophobic surfaces than on positively and negatively charged surfaces. Spore germling numbers were > 300% higher on hydrophobic surfaces than on positively and negatively charged surfaces when spores were allowed to settle in the light for 30 min and the settled spores allowed to subsequently germinate for 24 h. Spore germling numbers were consistently > 25% higher on hydrophobic surfaces than on positively and negatively charged surfaces when equal numbers of spores were allowed to completely settle in the light and subsequently germinate for 24 h. H. irregularis germ tube lengths were also significantly longer on positively charged plates than on negatively charged plates. All echinoderm extracts tested had significant effects on germination and settlement at levels below those of estimated ecological concentrations. Short-term (30 min) exposure and subsequent germination experiments indicated that higher concentrations of extracts had rapid toxic effects on algal spores. Synchronous effects of echinoderm extracts and plate charge upon spore settlement varied considerably and did not show a strong dose response relationship. Long-term (24 h) exposure of spores to echinoderm extracts had dosage dependent effects on germination and spore survival. The results of this study indicate that H. irregularis spores possess the capacity for complex responses to their environment, utilizing combined cues of surface charge, surface energy and biochemistry to determine where to settle and germinate. These responses may aid spores in the detection of suitable substrata and conditions for settlement in the marine environment.     

Adhesion Strength of Settled Spores of the Green Alga Enteromorpha

Strengths of attachment of spores of the green fouling alga Enteromorpha to glass have been measured using a modified water jet apparatus. Surface pressures of ～250 kPa were required to quantitatively remove attached spores after 4 h contact with a surface. The development of adhesive and cohesive strength is highly time-dependent; after 8 h in contact with a surface spores did not detach, even at pressures in excess of 250 kPa. Spores settled in groups are more resistant to detachment than single spores, which suggests that the adaptive value of gregarious settlement behaviour may lie in the greater resistance of groups to detachment forces in a naturally turbulent environment. The interfacial forces exerted as water impinges on the surface and the derivation of adhesion strength values in terms of wall shear stress are discussed and compared with those obtained by other methods. A surface pressure of 250 kPa approximates to 325 Pa wall shear stress. Calculation using the power-law formula predicts that detachment forces of this magnitude are unlikely to be realized at operating speeds for most vessels and that most Enteromorpha spores would not detach from untreated hulls.     

Individual and Coupled Effects of Echinoderm Extracts and Surface Hydrophobicity on Spore Settlement and Germination in the Brown Alga Hincksia irregularis

Marine substrata possess cues that influence the behavior of fouling organisms. Initial adhesion of fouling algal zoospores to surfaces is also theorized to depend primarily upon interactions between substrata and spore cell bodies and flagellar membranes. In an effort to identify cues and surface characteristics that influence spore settlement and early development, the effects of bioactive echinoderm extracts, surface charge, and surface hydrophobicity were examined individually and in tandem on zoospore settlement and germination in Hincksia irregularis. Experiments utilizing 96-well plastic culture plates confirmed that spore settlement and germination were significantly affected by surface charge and hydrophobicity as well as by echinoderm metabolites, both individually and in tandem. Spore settlement rates in the dark over 30?min were >?400% higher on hydrophobic surfaces than on positively and negatively charged surfaces. Spore germling numbers were >?300% higher on hydrophobic surfaces than on positively and negatively charged surfaces when spores were allowed to settle in the light for 30?min and the settled spores allowed to subsequently germinate for 24?h. Spore germling numbers were consistently >?25% higher on hydrophobic surfaces than on positively and negatively charged surfaces when equal numbers of spores were allowed to completely settle in the light and subsequently germinate for 24?h. H. irregularis germ tube lengths were also significantly longer on positively charged plates than on negatively charged plates. All echinoderm extracts tested had significant effects on germination and settlement at levels below those of estimated ecological concentrations. Short-term (30?min) exposure and subsequent germination experiments indicated that higher concentrations of extracts had rapid toxic effects on algal spores. Synchronous effects of echinoderm extracts and plate charge upon spore settlement varied considerably and did not show a strong dose response relationship. Long-term (24?h) exposure of spores to echinoderm extracts had dosage dependent effects on germination and spore survival. The results of this study indicate that H. irregularis spores possess the capacity for complex responses to their environment, utilizing combined cues of surface charge, surface energy and biochemistry to determine where to settle and germinate. These responses may aid spores in the detection of suitable substrata and conditions for settlement in the marine environment.     

Membrane permeability commonly shared among arginine-rich peptides

Delivery of proteins and other macromolecules using membrane-permeable carrier peptides is a recently developed novel technology, which enables us to modulate cellular functions for biological studies with therapeutic potential. One of the most often used carrier peptides is the arginine-rich basic peptide derived from HIV-1 Tat protein [HIV-1 Tat (48-60)]. Using this peptide, efficient intracellular delivery of molecules including proteins, oligonucleic acids and liposomes has been achieved. We have demonstrated that these features were commonly shared among many arginine-rich peptides such as HIV-1 Rev (34-50) and octaarginine. Not only the linear peptides but also branched-chain peptides showed efficient internalization with an optimum number of arginines (approximately eight residues). The structural and mechanistic features of the translocation of these membrane-permeable arginine-rich peptides are reviewed.     

A novel amphipathic cell-penetrating peptide based on the N-terminal glycosaminoglycan binding region of human apolipoprotein E

In the direct cell membrane penetration, arginine-rich cell-penetrating peptides are thought to penetrate into cells across the hydrophobic lipid membranes. To investigate the effect of the amphipathic property of arginine-rich peptide on the cell-penetrating ability, we designed a novel amphipathic cell-penetrating peptide, A2-17, and its derivative, A2-17KR, in which all lysine residues are substituted with arginine residues, based on the glycosaminoglycan binding region in the N-terminal α-helix bundle of human apolipoprotein E. Isothermal titration calorimetry showed that A2-17 variants have a strong ability to bind to heparin with high affinity. Circular dichroism and tryptophan fluorescence measurements demonstrated that A2-17 variants bind to lipid vesicles with a structural change from random coil to amphipathic α-helix, being inserted into the hydrophobic membrane interiors. Flow cytometric analysis and confocal laser scanning microscopy demonstrated the great cell penetration efficiency of A2-17 variants into CHO-K1 cells when incubated at low peptide concentrations (2 μM or less), suggesting that the increased amphipathicity with α-helix formation enhances the cell membrane penetration ability of arginine-rich peptides. Interestingly, A2-17KR exhibited lower efficiency of cell membrane penetration compared to A2-17 despite of their similar binding affinity to lipid membranes. Since high peptide concentrations (typically >10 μM) are usually prerequisite for efficient cell penetration of arginine-rich peptides, A2-17 is a unique amphipathic cell-penetrating peptide that exhibits an efficient cell penetration ability even at low peptide concentrations.     

Synthetic oligopeptide substrates which fail to compete with H1 histone for type II and type III isoenzymes of protein kinase C.

1. The oligopeptide AAASFKAKK which contains recognition motifs similar to that found in the surrounding of the site of H1 histone phosphorylated by protein kinase C is unable to compete with H1 histone for the type II and type III isoenzymes, though it is a good substrate for protein kinase C and it is able to compete with a physiological substrate of the enzyme. 2. Among several oligopeptides tested as an alternative substrate a very basic peptide proved to be the most effective inhibitor of H1 histone phosphorylation. This oligopeptide substrate contains basic recognition motifs at both sides of the phosphorylated residue at variance with the sequence of H1 histone in the surrounding of the phosphorylated site.     

Surface engineering: optimization of antigen presentation in self-assembled monolayers.

The formation of self-assembled monolayers (SAMs) on gold surfaces containing an antigenic peptide (NANP)6 and HS(CH2)11OH, and the specific binding of a monoclonal antibody to these layers were investigated by surface plasmon resonance (SPR). Peptides were synthesized by solid-state phase synthesis and were linked either to cysteine or to an alkyl-thiol to allow covalent attachment to gold. The content of the peptide in the SAMs was systematically varied, and the binding properties of the monoclonal antibody were compared with those measured by microcalorimetry in solution. At a critical peptide concentration in the SAM an optimal antibody binding and complete surface coverage was attained. At lower peptide concentrations, the amount of adsorbed antibody decreased; at higher peptide concentrations, the binding constant decreased. These effects can be explained if the accessibility of the antigenic epitopes depends on the peptide density. Addition of free antigen induced the desorption of bound antibodies and allowed accurate measurements of the dissociation rate constant. Binding constants obtained from steady-state measurements and from measurements of the kinetic rate constants were compared.     

The structure of the oligopeptide-binding protein, AppA, from Bacillus subtilis in complex with a nonapeptide

Besides their role as a source of amino acids for Bacillus subtilis, exogenous peptides play important roles in the signalling pathways leading to the development of competence and sporulation. B.subtilis has three peptide transport systems all belonging to the ATP-binding cassette family, a dipeptide permease (Dpp) and two oligopeptide permeases (Opp and App) with overlapping specificity. These comprise a membrane-spanning channel through which the peptide passes, a pair of ATPases which couple ATP hydrolysis to peptide translocation and a lipid-modified, membrane-anchored extracellular "binding-protein" that serves as the receptor for the system. Here, we present the crystal structure of a soluble form of the peptide-binding protein AppA, which has been solved to 1.6 A spacing by anomalous scattering and molecular replacement methods. The structure reveals a protein made of two distinct lobes with a topology similar to those of DppA from Escherichia coli and OppA from Salmonella typhimurium. Examination of the interlobe region reveals an enlarged pocket, containing electron density defining a nonapeptide ligand. The main-chain of the peptide is well defined and makes a series of polar contacts with the protein including salt-bridges at both its termini. The side-chain density is ambiguous in places, consistent with the interpretation that a population of peptides is bound, whose average electron density resembles the amino acid sequence N-VDSKNTSSW-C.     

NUTRIENTS DO NOT INFLUENCE SWIMMING BEHAVIOR OR SETTLEMENT RATES OF ECTOCARPUS SILICULOSUS (PHAEOPHYCEAE) SPORES

Spores newly released from plurilocular sporangia of Ectocarpus siliculosus (Dillw.) Lyngb. sporophytes were assayed for chemotaxis to nutrients and for settlement stimulation by nutrients. To enable these measurements with relatively small volumes and numbers of released spores, we developed a computer-assisted motion-analysis assay for spore chemotaxis and verified the results with a more standard, capillary tube chemotaxis assay. The presence of a nutrient gradient did not influence the swimming behavior of E. siliculosus spores in the motion-analysis assay, and likewise no chemotactic effect was measured in the capillary tube assay. Microplate settlement assays previously utilized with bacteria and invertebrates were adapted for use with algal spores. E. siliculosus spores settled at higher rates on a hydrophobic plastic surface than on surfaces with either positively or negatively charged hydrophilic coatings. Nutrient mixtures had no effect on the rate of spore settlement on hydrophobic surfaces.     

Fibronectin binding to the Treponema pallidum adhesin protein fragment rTp0483 on functionalized self-assembled monolayers

Past work has shown that Treponema pallidum, the causative agent of syphilis, binds host fibronectin (FN). FN and other host proteins are believed to bind to rare outer membrane proteins (OMPs) of T. pallidum, and it is postulated that this interaction may facilitate cell attachment and mask antigenic targets on the surface. This research seeks to prepare a surface capable of mimicking the FN binding ability of T. pallidum in order to investigate the impact of FN binding with adsorbed Tp0483 on the host response to the surface. By understanding this interaction, it may be possible to develop more effective treatments for infection and possibly mimic the stealth properties of the bacteria. Functionalized self-assembled monolayers (SAMs) on gold were used to investigate rTp0483 and FN adsorption. Using a quartz crystal microbalance (QCM), rTp0483 adsorption and subsequent FN adsorption onto rTp0483 were determined to be higher on negatively charged carboxylate-terminated self-assembled monolayers (-COO(-) SAMs) compared to the other surfaces analyzed. Kinetic analysis of rTp0483 adsorption using surface plasmon resonance (SPR) supported this finding. Kinetic analysis of FN adsorption using SPR revealed a multistep event, where the concentration of immobilized rTp0483 plays a role in FN binding. An examination of relative QCM dissipation energy compared to the shift in frequency showed a correlation between the physical properties of adsorbed rTp0483 and SAM surface chemistry. In addition, AFM images of rTp0483 on selected SAMs illustrated a preference of rTp0483 to bind as aggregates. Adsorption on -COO(-) SAMs was more uniform across the surface, which may help further explain why FN bound more strongly. rTp0483 antibody studies suggested the involvement of amino acids 274-289 and 316-333 in binding between rTp0483 to FN, while a peptide blocking study only showed inhibition of binding with amino acids 316-333. Finally, surface adsorbed rTp0483 with FN bound significantly less anti-RGD and gelatin compared to FN adsorbed directly to -COO(-) SAMs, indicating that one or both binding regions may play a role in binding between rTp0483 and FN.     

Antifouling potential of lubricious, micro-engineered, PDMS elastomers against zoospores of the green fouling alga Ulva (Enteromorpha)

The settlement and release of Ulva spores from chemically modified, micro-engineered surface topographies have been investigated using poly(dimethyl siloxane) elastomers (PDMSe) with varying additions of non-network forming poly(dimethyl siloxane) based oils. The topographic features were based on 5 microns wide pillars or ridges separated by 5, 10, or 20 microns wide channels. Pattern depths were 5 or 1.5 microns. Swimming spores showed no marked difference in settlement on smooth surfaces covered with excess PDMS oils. However, incorporation of oils significantly reduced settlement density on many of the surfaces with topographic features, in particular, the 5 microns wide and deep channels. Previous results, confirmed here, demonstrate preferences by the spores to settle in channels and against pillars with spatial dimensions of 5 microns, 10 microns and 20 microns. The combination of lubricity and pillars significantly reduced the number of attached spores compared to the control, smooth, unmodified PDMSe surfaces when exposed to turbulent flow in a flow channel. The results are discussed in relation to the energy needs for spores to adhere to various surface features and the concepts of ultrahydrophobic surfaces. A factorial, multi-level experimental design was analyzed and a 2nd order polynomial model was regressed for statistically significant effects and interactions to determine the magnitude and direction of influence on the spore density measurements between factor levels.     

The ExsA protein of Bacillus cereus is required for assembly of coat and exosporium onto the spore surface

The outermost layer of spores of the Bacillus cereus family is a loose structure known as the exosporium. Spores of a library of Tn917-LTV1 transposon insertion mutants of B. cereus ATCC 10876 were partitioned into hexadecane; a less hydrophobic mutant that was isolated contained an insertion in the exsA promoter region. ExsA is the equivalent of SafA (YrbA) of Bacillus subtilis, which is also implicated in spore coat assembly; the gene organizations around both are identical, and both proteins contain a very conserved N-terminal cortex-binding domain of ca. 50 residues, although the rest of the sequence is much less conserved. In particular, unlike SafA, the ExsA protein contains multiple tandem oligopeptide repeats and is therefore likely to have an extended structure. The exsA gene is expressed in the mother cell during sporulation. Spores of an exsA mutant are extremely permeable to lysozyme and are blocked in late stages of germination, which require coat-associated functions. Two mutants expressing differently truncated versions of ExsA were constructed, and they showed the same gross defects in the attachment of exosporium and spore coat layers. The protein profile of the residual exosporium harvested from spores of the three mutants--two expressing truncated proteins and the mutant with the original transposon insertion in the promoter region--showed some differences from the wild type and from each other, but the major exosporium glycoproteins were retained. The exsA gene is extremely important for the normal assembly and anchoring of both the spore coat and exosporium layers in spores of B. cereus.