Is the In?Vitro Ejection of Bacteriophage DNA Quasistatic? A Bulk to Single Virus Study

Bacteriophage T5 DNA ejection is a complex process that occurs on several timescales in vitro. By using a combination of bulk and single phage measurements, we quantitatively study the three steps of the ejection—binding to the host receptor, channel-opening, and DNA release. Each step is separately addressed and its kinetics parameters evaluated. We reconstruct the bulk kinetics from the distribution of single phage events by following individual DNA molecules with unprecedented time resolution. We show that, at the single phage level, the ejection kinetics of the DNA happens by rapid transient bursts that are not correlated to any genome sequence defects. We speculate that these transient pauses are due to local phase transitions of the DNA inside the capsid. We predict that such pauses should be seen for other phages with similar DNA packing ratios.     

FhuA-mediated phage genome transfer into liposomes: a cryo-electron tomography study

BACKGROUND: The transfer of phage genomes into host cells is a well established but only dimly understood process. Following the irreversible phage binding to a receptor in the bacterial outer membrane, the DNA is ejected from the viral capsid and transferred across the bacterial cell envelope. In Escherichia coli, the mere interaction of the phage T5 with its outer membrane receptor, the ferrichrome transporter FhuA, is sufficient to trigger the release of the DNA from the phage capsid. Although the structure of FhuA has been determined at atomic resolution, the understanding of the respective roles of phage and bacterial proteins in DNA channeling and the mechanisms by which the transfer of the DNA is mediated remains fragmentary. RESULTS: We report on the use of cryo-electron tomography to analyze, at a molecular level, the interactions of T5 phages bound to FhuA-containing proteoliposomes. The resolution of the three-dimensional reconstructions allowed us to visualize the phage-proteoliposome interaction before and after release of the genome into the vesicles. After binding to its receptor, the straight fiber of the phage T5 (the "tip" of the viral tail made of pb2 proteins) traverses the lipid bilayer, allowing the transfer of its double-stranded DNA (121,000 bp) into the proteoliposome. Concomitantly, the tip of the tail undergoes a major conformational change; it shrinks in length (from 50 to 23 nm), while its diameter increases (from 2 to 4 nm). CONCLUSIONS: Taking into account the crystal structure of FhuA, we conclude that FhuA is only used as a docking site for the phage. The tip of the phage tail acts like an "injection needle," creating a passageway at the periphery of FhuA, through which the DNA crosses the membrane. A possible mechanistic scenario for the transfer of the viral genome into bacteria is discussed.     

Bacteriophage T5 DNA ejection under pressure

The transfer of the bacteriophage genome from the capsid into the host cell is a key step of the infectious process. In bacteriophage T5, DNA ejection can be triggered in vitro by simple binding of the phage to its purified Escherichia coli receptor FhuA. Using electrophoresis and cryo-electron microscopy, we measure the extent of DNA ejection as a function of the external osmotic pressure. In the high pressure range (7-16 atm), the amount of DNA ejected decreases with increasing pressure, as theoretically predicted and observed for λ and SPP1 bacteriophages. In the low and moderate pressure range (2-7 atm), T5 exhibits an unexpected behavior. Instead of a unique ejected length, multiple populations coexist. Some phages eject their complete genome, whereas others stop at some nonrandom states that do not depend on the applied pressure. We show that contrarily to what is observed for the phages SPP1 and λ, T5 ejection cannot be explained as resulting from a simple pressure equilibrium between the inside and outside of the capsid. Kinetics parameters and/or structural characteristics of the ejection machinery could play a determinant role in T5 DNA ejection.     

Pycnometric, viscometric and calorimetric studies of the process to release the double-stranded DNA from the Un bacteriophage

Knowledge of both the packaging of the linear, double-stranded (ds)DNA in bacteriophages and its subsequent release into the bacterial host is vital to our understanding of phage infection. There is now strong evidence that packaging requires a powerful rotary motor fuelled by ATP. From thermodynamic studies, however, it has been proposed that, at least for those viruses with a contractile tail, the dsDNA ejection from the phage head is a relatively simple physical process that does not require cellular energy and is facilitated by the difference in the conditions of the medium in the environments inside and outside the head. In this case, there should be no enthalpic effects associated with the dehiscence of the capsid and no destruction of it or the other structural elements of the phage. For the present study of temperature-induced phage dehiscence, we used a newly discovered phage with a contractile tail, named the Un (unknown) bacteriophage. Evidence is given of its characteristics in terms of ultrastructural morphology, serological parameters, host range and interaction with host cell. These show that, although it has similarities with the T-even phages and, in particular, the DDVI phage, it appears to be a new type. Earlier viscometric studies with it had shown that the temperature-induced release of the capsid dsDNA was completed at 70 degrees C. In the present investigation, a concentrated suspension of purified phage was subjected to pycnometric analysis through the temperature range of 30 to 70 degrees C. This showed that a significant and abrupt increase in the phage partial volume takes place, which remarkably is in the order of threefold. Viscometric measurements over time at 72 degrees C gave a kinetic curve from which evidence it was suggested that the temperature-induced DNA release is similar to a second order phase transition. At the same time, data from differential scanning calorimetry over the same temperature range showed no enthalpic effect. Our results indicate that the ejection of DNA from the capsid tail is driven by an entropy change.     

Structure–Function Analysis of the DNA Translocating Portal of the Bacteriophage T4 Packaging Machine

Tailed bacteriophages and herpesviruses consist of a structurally well conserved dodecameric portal at a special 5-fold vertex of the capsid. The portal plays critical roles in head assembly, genome packaging, neck/tail attachment, and genome ejection. Although the structures of portals from phages φ29, SPP1, and P22 have been determined, their mechanistic roles have not been well understood. Structural analysis of phage T4 portal (gp20) has been hampered because of its unusual interaction with the Escherichia coli inner membrane. Here, we predict atomic models for the T4 portal monomer and dodecamer, and we fit the dodecamer into the cryo-electron microscopy density of the phage portal vertex. The core structure, like that from other phages, is cone shaped with the wider end containing the “wing” and “crown” domains inside the phage head. A long “stem” encloses a central channel, and a narrow “stalk” protrudes outside the capsid. A biochemical approach was developed to analyze portal function by incorporating plasmid-expressed portal protein into phage heads and determining the effect of mutations on head assembly, DNA translocation, and virion production. We found that the protruding loops of the stalk domain are involved in assembling the DNA packaging motor. A loop that connects the stalk to the channel might be required for communication between the motor and the portal. The “tunnel” loops that project into the channel are essential for sealing the packaged head. These studies established that the portal is required throughout the DNA packaging process, with different domains participating at different stages of genome packaging.     

Conformational Changes Leading to T7 DNA Delivery upon Interaction with the Bacterial Receptor

The majority of bacteriophages protect their genetic material by packaging the nucleic acid in concentric layers to an almost crystalline concentration inside protein shells (capsid). This highly condensed genome also has to be efficiently injected into the host bacterium in a process named ejection. Most phages use a specialized complex (often a tail) to deliver the genome without disrupting cell integrity. Bacteriophage T7 belongs to the Podoviridae family and has a short, non-contractile tail formed by a tubular structure surrounded by fibers. Here we characterize the kinetics and structure of bacteriophage T7 DNA delivery process. We show that T7 recognizes lipopolysaccharides (LPS) from Escherichia coli rough strains through the fibers. Rough LPS acts as the main phage receptor and drives DNA ejection in vitro. The structural characterization of the phage tail after ejection using cryo-electron microscopy (cryo-EM) and single particle reconstruction methods revealed the major conformational changes needed for DNA delivery at low resolution. Interaction with the receptor causes fiber tilting and opening of the internal tail channel by untwisting the nozzle domain, allowing release of DNA and probably of the internal head proteins.     

A kinetic analysis of DNA ejection from tailed phages revealing the prerequisite activation energy

All tailed bacteriophages follow the same general scheme of infection: they bind to their specific host receptor and then transfer their genome into the bacterium. DNA translocation is thought to be initiated by the strong pressure due to DNA packing inside the capsid. However, the exact mechanism by which each phage controls its DNA ejection remains unknown. Using light scattering, we analyzed the kinetics of in vitro DNA release from phages SPP1 and λ (Siphoviridae family) and found a simple exponential decay. The ejection characteristic time was studied as a function of the temperature and found to follow an Arrhenius law, allowing us to determine the activation energy that governs DNA ejection. A value of 25-30 kcal/mol is obtained for SPP1 and λ, comparable to the one measured in vitro for T5 (Siphoviridae) and in vivo for T7 (Podoviridae). This suggests similar mechanisms of DNA ejection control. In all tailed phages, the opening of the connector-tail channel is needed for DNA release and could constitute the limiting step. The common value of the activation energy likely reflects the existence for all phages of an optimum value, ensuring a compromise between efficient DNA delivery and high stability of the virus.     

Encapsidation and transfer of phage DNA into host cells: from in vivo to single particles studies

A remarkable property of bacteriophages is their capacity to encapsidate large amounts of DNA during morphogenesis and to maintain their genome in the capsid in a very stable form even under extreme conditions. Even as remarkable is the efficiency with which their genome is ejected from the phage particle and transferred into the host bacteria. Biophysical techniques have led to significant progresses in characterizing these mechanisms. The molecular motor of encapsidation of several phages as well as the organization of viral capsids have been described at atomic resolution. Cryo-electron microscopy and fluorescence microscopy have permitted to describe DNA ejection at the level of single phage particles. Theoretical models of encapsidation and ejection have been proposed that can be confronted to experimental data. This review will present the state of the art on the recent advances brought by biophysics in this field. Reference will be given to the work performed on double-stranded DNA phages and on one of its representative, phage T5, our working model.     

Dynamics of bacteriophage genome ejection in vitro and in vivo

Bacteriophages, phages for short, are viruses of bacteria. The majority of phages contain a double-stranded DNA genome packaged in a capsid at a density of ～500 mg ml(-1). This high density requires substantial compression of the normal B-form helix, leading to the conjecture that DNA in mature phage virions is under significant pressure, and that pressure is used to eject the DNA during infection. A large number of theoretical, computer simulation and in vitro experimental studies surrounding this conjecture have revealed many--though often isolated and/or contradictory--aspects of packaged DNA. This prompts us to present a unified view of the statistical physics and thermodynamics of DNA packaged in phage capsids. We argue that the DNA in a mature phage is in a (meta)stable state, wherein electrostatic self-repulsion is balanced by curvature stress due to confinement in the capsid. We show that in addition to the osmotic pressure associated with the packaged DNA and its counterions, there are four different pressures within the capsid: pressure on the DNA, hydrostatic pressure, the pressure experienced by the capsid and the pressure associated with the chemical potential of DNA ejection. Significantly, we analyze the mechanism of force transmission in the packaged DNA and demonstrate that the pressure on DNA is not important for ejection. We derive equations showing a strong hydrostatic pressure difference across the capsid shell. We propose that when a phage is triggered to eject by interaction with its receptor in vitro, the (thermodynamic) incentive of water molecules to enter the phage capsid flushes the DNA out of the capsid. In vivo, the difference between the osmotic pressures in the bacterial cell cytoplasm and the culture medium similarly results in a water flow that drags the DNA out of the capsid and into the bacterial cell.     

Packaging of genomes in bacteriophages: a comparison of ssRNA bacteriophages and dsDNA bacteriophages.

In complex DNA bacteriophages like lambda, T4, T7, P22, P2, the DNA is packaged into a preformed precursor particle which sometimes has a smaller size and often a shape different from that of the phage head. This packaging mechanism is different from the one suggested for the RNA phages, according to which RNA nucleates the shell formation. The different mechanisms could be understood by comparing the genomes to be packaged: single stranded fII RNA has a very compact structure with high helix content. It might easily form quasispherical structures in solution (as seen in the electron microscope by Thach & Thach (1973)) around which the capsid could assemble. Double stranded phage DNA, on the other hand, is a rigid molecule which occupies a large volume in solution and has to be concentrated 15-fold during packaging into the preformed capsid, and the change in the capsid structure observed hereby might provide the necessary DNA condensation energy.     

Pressure built by DNA packing inside virions: enough to drive DNA ejection in vitro, largely insufficient for delivery into the bacterial cytoplasm

Tailed bacteriophage particles carry DNA highly pressurized inside the capsid. Challenge with their receptor promotes release of viral DNA. We show that addition of the osmolyte polyethylene glycol (PEG) has two distinct effects in bacteriophage SPP1 DNA ejection. One effect is to inhibit the trigger for DNA ejection. The other effect is to exert an osmotic pressure that controls the extent of DNA released in phages that initiate ejection. We carried out independent measurements of each effect, which is an essential requirement for their quantitative study. The fraction of phages that do not eject increased linearly with the external osmotic pressure. In the remaining phage particles ejection stopped after a defined amount of DNA was reached inside the capsid. Direct measurement of the size of non-ejected DNA by gel electrophoresis at different PEG concentrations in the latter sub-population allowed determination of the external osmotic pressure that balances the force powering DNA exit (47 atm for SPP1 wild-type). DNA exit stops when the ejection force mainly due to repulsion between DNA strands inside the SPP1 capsid equalizes the force resisting DNA insertion into the PEG solution. Considering the turgor pressure in the Bacillus subtilis cytoplasm the energy stored in the tight phage DNA packing is only sufficient to power entry of the first 17% of the SPP1 chromosome into the cell, the remaining 83% requiring application of additional force for internalization.     

Phenogenetic characterization of a group of giant Phi KZ-like bacteriophages of Pseudomonas aeruginosa

A comparative study was made of a group of Pseudomonas aeruginosa virulent giant DNA bacteriophages similar to phage phi KZ in several genetic and phenotypic properties (particle size, particle morphology, genome size, appearance of negative colonies, high productivity, broad spectrum of lytic activity, ability to overcome the suppressing effect of plasmids, absence of several DNA restriction sites, capability of general transduction, pseudolysogeny). We have recently sequenced the phage phi KZ genome (288,334 bp) [J. Mol. Biol., 2002, vol. 317, pp. 1-19]. By DNA homology, the phages were assigned to three species (represented by phage phi KZ, Lin68, and EL, respectively) and two new genera (phi KZ and EL). Restriction enzyme analysis revealed the mosaic genome structure in four phages of the phi KZ species (phi KZ, Lin21, NN, and PTB80) and two phages of the EL species (EL and RU). Comparisons with respect to phage particle size, number of structural proteins, and the N-terminal sequences of the major capsid protein confirmed the phylogenetic relatedness of the phages belonging to the phi KZ genus. The origin and evolution of the phi KZ-like phages are discussed. Analysis of protein sequences encoded by the phage phi KZ genome made it possible to assume wide migration of the phi KZ-like phages (wandering phages) among various prokaryotes and possibly eukaryotes. Since the phage phi KZ genome codes for potentially toxic proteins, caution must be exercised in the employment of large bacteriophages in phage therapy.     

Initial cos cleavage of bacteriophage lambda concatemers requires proheads and gpFI in vivo

The development of bacteriophage lambda and double-stranded DNA viruses in general involves the convergence of two separate pathways: DNA replication and head assembly. Clearly, packaging will proceed only if an empty capsid shell, the prohead, is present to receive the DNA, but genetic evidence suggests that proheads play another role in the packaging process. For example, lambda phages with an amber mutation in any head gene or in FI, the gene encoding the accessory packaging protein gpFI, are able to produce normal amounts of DNA concatemers but they are not cut, or matured, into unit length chromosomes for packaging. Similar observations have been made for herpes simplex 1 virus. In the case of lambda, a negative model proposes that in the amber phages, unassembled capsid components are inhibitory to maturation, and a positive model suggests that assembled proheads are required for cutting. We tested the negative model by using a deletion mutant devoid of all prohead genes and FI in an in vivo cos cleavage assay; in this deleted phage, the cohesive ends were not cut. When lambda proheads and gpFI were provided in vivo via a second prophage, cutting was restored, and gpFI was required, results that support the positive model. Phage 21 is a sister phage of lambda, and although its capsid proteins share approximately 60% residue identity with lambda's, phage 21 proheads did not restore cutting, even when provided with the accessory protein gpFI. Models for the role of proheads and gpFI in cos cutting are discussed.     

Specificity of interactions among the DNA-packaging machine components of T4-related bacteriophages

Tailed bacteriophages use powerful molecular motors to package the viral genome into a preformed capsid. Packaging at a rate of up to ～2000 bp/s and generating a power density twice that of an automobile engine, the phage T4 motor is the fastest and most powerful reported to date. Central to DNA packaging are dynamic interactions among the packaging components, capsid (gp23), portal (gp20), motor (gp17, large "terminase"), and regulator (gp16, small terminase), leading to precise orchestration of the packaging process, but the mechanisms are poorly understood. Here we analyzed the interactions between small and large terminases of T4-related phages. Our results show that the gp17 packaging ATPase is maximally stimulated by homologous, but not heterologous, gp16. Multiple interaction sites are identified in both gp16 and gp17. The specificity determinants in gp16 are clustered in the diverged N- and C-terminal domains (regions I-III). Swapping of diverged region(s), such as replacing C-terminal RB49 region III with that of T4, switched ATPase stimulation specificity. Two specificity regions, amino acids 37-52 and 290-315, are identified in or near the gp17-ATPase "transmission" subdomain II. gp16 binding at these sites might cause a conformational change positioning the ATPase-coupling residues into the catalytic pocket, triggering ATP hydrolysis. These results lead to a model in which multiple weak interactions between motor and regulator allow dynamic assembly and disassembly of various packaging complexes, depending on the functional state of the packaging machine. This might be a general mechanism for regulation of the phage packaging machine and other complex molecular machines.     

Dynamics of double stranded DNA reptation from bacteriophage.

The dynamics of dsDNA release process from a phage head has been analyzed theoretically. The process was considered as dsDNA reptation through the phage tail. The driving force is assumed to be the decrease of the DNA globule free energy on its releasing from the head in the surrounding medium. The results of the equilibrium theory on an intraphage DNA globule were applied. Three possible sources of friction were examined. The first one is in the inner channel of the tail. The second is the friction of DNA segments in the whole globule volume, which is essential when the globule decondensation is a collective process, at simultaneous moving of all the turns (mechanism 1). The third is the globule friction with the capsid inner surface, that is most important when decondensation proceeds via the globule rotation as a whole spool (mechanism 2). Mechanism 1 would require a lot of time for ejection. Mechanism 2 would lead to different ejection dynamics of short- and long-tailed phages. Comparison of the theoretical results with the published experimental data argues in favor of mechanism 2.     

The minor capsid protein gp7 of bacteriophage SPP1 is required for efficient infection of Bacillus subtilis

Gp7 is a minor capsid protein of the Bacillus subtilis bacteriophage SPP1. Homologous proteins are found in numerous phages but their function remained unknown. Deletion of gene 7 from the SPP1 genome yielded a mutant phage (SPP1del7) with reduced burst-size. SPP1del7 infections led to normal assembly of virus particles whose morphology, DNA and protein composition was undistinguishable from wild-type virions. However, only approximately 25% of the viral particles that lack gp7 were infectious. SPP1del7 particles caused a reduced depolarization of the B. subtilis membrane in infection assays suggesting a defect in virus genome traffic to the host cell. A higher number of SPP1del7 DNA ejection events led to abortive release of DNA to the culture medium when compared with wild-type infections. DNA ejection in vitro showed that no detectable gp7 is co-ejected with the SPP1 genome and that its presence in the virion correlated with anchoring of released DNA to the phage particle. The release of DNA from wild-type phages was slower than that from SPP1del7 suggesting that gp7 controls DNA exit from the virion. This feature is proposed to play a central role in supporting correct routing of the phage genome from the virion to the cell cytoplasm.     

Parent-to-Progeny Transfer and Recombination of T4rII Bacteriophage

Transfer of parental, light (not substituted with 5-bromodeoxyuridine) (32)P-deoxyribonucleic acid (DNA) from rII(-) mutants of T4 bacteriophage to heavy (5-bromodeoxyuridine-substituted) progeny in Escherichia coli B was less homogeneous than in wild phages. The net transfer was 5 to 20% of the value for wild T4 phage, and the parental contribution per progeny DNA molecule amounted to 7 to 100% of the genome. Three classes could be distinguished, based on the density distribution of parental label in CsCl analysis of the progeny phages. "Far recombined" phages contain parental material only in semiconservatively replicated subunits covalently attached to progeny DNA, amounting to 5 to 10% parental contribution per genome. "Intermediate recombinants" contain, aside from conventional recombinant DNA, parental DNA banding at the original, light density. This DNA may be unattached to heavy progeny DNA or attached by weak bonds which are very sensitive to shearing during the extraction procedure. The parental contribution is 10 to 50% per progeny DNA molecule in this class. "Conservative" phages band close to the parental, light density in CsCl; their DNA is purely light. When the parental phage is labeled with both (3)H-leucine (capsid) and (32)P (DNA), the specific activity of (3)H/(32)P in the "conservative progeny" is 10 to 40% of that in the parental, showing that at least some of the (32)P in this area belongs to phages with parental DNA as the sole DNA component inside an unlabeled capsid, i.e., parental DNA which has been injected into the host and matured in a new capsid without replication or recombination. This phenomenon occurs to about the same extent in both single and multiple infection.     

Analysis of the coliphage T5 DNA ejection process with free and liposome-associated TonA protein.

Outer membrane protein TonA, the receptor for coliphage T5, has been partially purified and incorporated into the phospholipid bilayer of liposomes. Adsorption of the phage to its receptor in either a free or liposome-associated form is fast and sufficient to trigger the ejection of encapsidated DNA. In both in vitro systems the exit of DNA from the phage capsid is a very slow process. Ejected DNA can partially accumulate inside the liposome aqueous compartment, but the transfer from the phage head to the liposome internal space is never complete, perhaps because the liposome volume is too small. The presence of polyamines or divalent cations (magnesium) or both in the incubation medium diminished the extent of DNA ejection, possibly by stabilizing DNA inside the head. DNA movement was slowed as the temperature was decreased from 37 to 18 degrees C. Furthermore, incubation at 4 degrees C totally prevented this DNA movement, even if a large part of the DNA had already exited the capsid.     

Model for DNA packaging into bacteriophage T4 heads.

The mechanism of DNA packaging into bacteriophage T4 heads in vivo was investigated by glucosylation of hydroxymethylcytosine residues in a conditionally glucose-deficient host. Cytoplasmic DNA associated with partially packaged ts49 heads can be fully glucosylated, whereas DNA already packaged into these heads is shown to be resistant to glucosylation. After temperature shift and completion of arrested packaging into the reversible temperature-sensitive ts49 head, the structure of the DNA in the mature ts49 phage was investigated by restriction enzyme digestion, autoradiography, and other techniques. Such mature DNA appears to be fully glucosylated along part of its length and nonglucosylated on the remainder. Its structure suggests that the DNA is run into the head linearly and unidirectionally from one mature end and that there is little sequence specificity in that portion of the T4 DNA which first enters the capsid. This technique should be useful in investigation of the three-dimensional structure of first- and last-packaged DNA within the head; preliminary studies including autoradiography of osmotically shocked phage suggest that the DNA which first enters the head is deposited toward the center of the capsid and that the end of the DNA which first enters the head exits first upon injection. In conjunction with studies of the structure of condensed DNA, the positions and functions of T4 capsid proteins in DNA packaging, and the order of T4 packaging functions [Earnshaw and Harrison, Nature (London) 268:598-602, 1977; Hsiao and Black, Proc. Natl. Acad. Sci. U.S.A. 74:3652-3656, 1977; Müller-Salamin et al., J. Virol. 24:121-134, 1977; Richards et al., J. Mol. Biol. 78:255-259, 1973], the features described above suggest the following model: the first DNA end is fixed to the proximal apex of the head at p20 and the DNA is then pumped into the head enzymatically by proteins (p20 + p17) which induce torsion in the DNA molecule.