Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluorescence quenching investigation on the interaction of glutathione‐CdTe/CdS quantum dots with sanguinarine and its analytical application

Water‐soluble glutathione (GSH)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. In pH 5.4 sodium phosphate buffer medium, the interaction between GSH‐CdTe/CdS QDs and sanguinarine (SA) was investigated by spectroscopic methods, including fluorescence spectroscopy and ultraviolet‐visible absorption spectroscopy. Addition of SA to GSH‐CdTe/CdS QDs results in fluorescence quenching of GSH‐CdTe/CdS QDs. Quenching intensity was in proportion to the concentration of SA in a certain range. Investigation of the quenching mechanism, proved that the fluorescence quenching of GSH‐CdTe/CdS QDs by SA is a result of electron transfer. Based on the quenching of the fluorescence of GSH‐CdTe/CdS QDs by SA, a novel, simple, rapid and specific method for SA determination was proposed. The detection limit for SA was 3.4 ng/mL and the quantitative determination range was 0.2–40.0 µg/mL with a correlation coefficient of 0.9988. The method has been applied to the determination of SA in synthetic samples and fresh urine samples of healthy human with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Luminescence Enhancement of Carboxyl-Coated CdTe Quantum Dots by Silver Nanoparticles

Metallic nanoparticles (NPs) have been used to improve the sensibility of biosensors and bioassays either by enhancing radiative emission or inducing quenching process on fluorescent probes. The aim of this research was to study the interaction of silver and silver-pectin NPs with water-dispersed carboxyl-coated cadmium telluride (CdTe) quantum dots (QDs). Metallic NPs were observed to change the emission of these fluorophores through local field effects. In a solution-base platform, an increase of 82 % was observed for the CdTe emission due to the interaction of QDs and silver-pectin NPs. QDs interaction with silver NPs without pectin was also investigated and a smaller emission enhancement of 20 % was detected. We observed that the NPs’ nature and QDs’ surface charge and concentration are important parameters for NPs-QDs interaction. Moreover, the presence of the pectin polymer shows to be a key component to the observed fluorescence enhancement.     

Effect of CdTe Quantum Dots Size on the Conformational Changes of Human Serum Albumin: Results of Spectroscopy and Isothermal Titration Calorimetry

Quantum dots (QDs) are recognized as some of the most promising candidates for future applications in biomedicine. However, concerns about their safety have delayed their widespread application. Human serum albumin (HSA) is the main protein component of the circulatory system. It is important to explore the interaction of QDs with HSA for the potential in vivo application of QDs. Herein, using spectroscopy and isothermal titration calorimetry (ITC), the effect of glutathione-capped CdTe quantum dots of different sizes on the HSA was investigated. After correction for the inner filter effect, the fluorescence emission spectra and synchronous fluorescence spectra showed that the microenvironment of aromatic acid residues in the protein was slightly changed when the glutathione (GSH)–cadmium telluride (CdTe) QDs was added, and GSH–CdTe QDs with larger particle size exhibited a much higher effect on HSA than the small particles. Although a ground-state complex between HSA and GSH–CdTe QDs was formed, the UV–vis absorption and circular dichroism spectroscopic results did not find appreciable conformational changes of HSA. ITC has been used for the first time to characterize the binding of QDs with HSA. The ITC results revealed that the binding was a thermodynamically spontaneous process mainly driven by hydrophobic interactions, and the binding constant tended to increase as the GSH–CdTe QDs size increased. These findings are helpful in understanding the bioactivities of QDs in vivo and can be used to assist in the design of biocompatible and stable QDs.     

A selective determination of copper ions in water samples based on the fluorescence quenching of thiol‐capped CdTe quantum dots

CdTe quantum dots (QDs) capped with different stabilizers, i.e. thioglycolic acid (TGA), 3‐mercaptopropionic acid (MPA) and glutathione (GSH) were investigated as fluorescent probes for the determination of Cu²⁺. The stabilizer was shown to play an important role in both the sensitivity and selectivity for the determination of Cu²⁺. TGA‐capped CdTe QDs showed the highest sensitivity, followed by the MPA and GSH‐capped CdTe QDs, respectively. The TGA‐ and MPA‐capped CdTe QDs were not selective for Cu²⁺ that was affected by Ag⁺. The GSH‐capped CdTe QDs were insensitive to Ag⁺ and were used to determine Cu²⁺ in water samples. Under optimal conditions, quenching of the fluorescence intensity (F₀/F) increased linearly with the concentration of Cu²⁺ over a range of 0.10–4.0 µg/mL and the detection limit was 0.06 µg/mL. The developed method was successfully applied to the determination of Cu²⁺ in water samples. Good recoveries of 93–104%, with a relative standard deviation of < 6% demonstrated that the developed simple method was accurate and reliable. The quenching mechanisms were also described. Copyright © 2015 John Wiley & Sons, Ltd.     

Labeling of BSA and imaging of mouse T‐lymphocyte as well as mouse spleen tissue by l‐glutathione capped CdTe quantum dots

l ‐glutathione capped highly fluorescent CdTe quantum dots (QDs) were prepared by an aqueous approach and used as fluorescent labels to link albumin bovine serum (BSA) and rat anti‐mouse CD4, which was expressed on mouse T‐lymphocyte and mouse spleen tissue. The sharp and narrow emission peaks showed that the as‐prepared QDs have desirable dispersibility, uniformity and good fluorescence properties. Both CdTe–BSA and CdTe–CD4 conjugates showed an enhancement of fluorescence intensity over that of bare CdTe QDs. The experimental result of gel electrophoresis confirmed the successful conjugation of CdTe–BSA and CdTe–CD4. The fluorescent microscopic images of CdTe–CD4 labeled mouse T‐lymphocyte cells and mouse spleen tissue were compared with that obtained from fluorescein isothiocyanate labeling. It was demonstrated that the CdTe QDs‐based probe exhibited much better photostability and fluorescence intensity than fluorescein isothiocyanate, showing a good application potential in the immuno‐labeling of cells and tissues. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of highly luminescent and biocompatible CdTe/CdS/ZnS quantum dots using microwave irradiation: a comparative study of different ligands

We compared the effects of several ligands frequently used in aqueous synthesis, including L‐cysteine, L‐cysteine hydrochloride, N‐acetyl‐L‐cysteine (NAC), glutathione and 3‐mercaptopropionic acid, for microwave synthesis of CdTe quantum dots (QDs) in a sealed vessel with varied temperatures and times, and then developed a rapid microwave‐assisted protocol for preparing highly luminescent, photostable and biocompatible CdTe/CdS/ZnS core–multishell QDs. The effects of molecular structures of these ligands on QD synthesis under high temperatures were explored. Among these ligands, NAC was found to be the optimal ligand in terms of the optical properties of resultant QDs and reaction conditions. The emission wavelength of NAC‐capped CdTe QDs could reach 700 nm in 5 min by controlling the reaction temperature, and the resultant CdTe/CdS/ZnS core–multishell QDs could achieve the highest quantum yields up to 74% with robust photostability. In addition, the effects of temperature, growth time and shell–precursor ratio on shell growth were examined. Finally, cell culturing indicated the low cytotoxicity of CdTe/CdS/ZnS core–multishell QDs as compared to CdTe and CdTe/CdS QDs, suggesting their high potential for applications in biomedical imaging and diagnostics. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive detection of sodium cromoglycate with glutathione‐capped CdTe quantum dots as a novel fluorescence probe

A sensitive and simple analytical strategy for the detection of sodium cromoglycate (SCG) has been established based on a readily detectable fluorescence quenching effect of SCG for glutathione‐capped (GSH‐capped) CdTe quantum dots (QDs). The fluorescence of GSH‐capped CdTe QDs could be efficiently quenched by SCG through electron transfer from GSH‐capped CdTe QDs to SCG. Under optimum conditions, the response was linearly proportional to the concentration of SCG between 0.6419 and 100 µg/mL, with a correlation coefficient (R) of 0.9964; the detection limit (3δ/K) was 0.1926 µg/mL. The optimum conditions and the influence of coexisting foreign substances on the reaction were also investigated. The very effective and simple method reported here has been successfully applied to the determination of SCG in synthetic and real samples. It is believed that the established approach could have good prospects for application in the fields of clinical diseases diagnosis and treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

A sensitive fluorescent sensor based on the photoinduced electron transfer mechanism for cefixime and ctDNA

Cefixime is a third generation orally administered cephalosporin that is frequently used as a broad spectrum antibiotic against various gram‐negative and gram‐positive bacteria. In this study, a simple and sensitive fluorescent sensor for the determination of the cefixime and ctDNA was established based on the CdTe:Zn²⁺ quantum dots (QDs). The fluorescence of CdTe:Zn²⁺ QDs can be effectively quenched by cefixime in virtue of the surface binding of cefixime on CdTe:Zn²⁺ QDs and the subsequent photoinduced electron transfer process from CdTe:Zn²⁺ QDs to cefixime, in particular, the high sensitivity of QDs fluorescence emission to cefixime at the micromole per liter level, which render the cefixime‐CdTe:Zn²⁺ QDs system into fluorescence “OFF” status, then turn on in the presence of ctDNA. Furthermore, the Fourier transform infrared (FTIR) spectra of characteristic bands of C–N and N–H groups of cefixime endow evidence for the interaction of cefixime with CdTe:Zn²⁺ QDs. The relative electrochemical behavior of the affinity of CdTe:Zn²⁺ QDs for cefixime and ctDNA reveals the potential molecular binding mechanism.     

Continuous-flow reactor-based synthesis of carbohydrate and dihydrolipoic acid-capped quantum dots

A detailed protocol for the large-scale synthesis of carbohydrate and dihydrolipoic acid (DHLA)-coated CdSe/ZnS and CdTe/ZnS nanoparticles using continuous flow reactors is described here. Three continuous flow microreaction systems, operating at three different temperatures, are used for the synthesis of mannose-, galactose- or DHLA-functionalized quantum dots (QDs). In the first step of synthesis, the CdSe and CdTe nanoparticles are prepared. The size and spectral properties of the CdSe core of the nanoparticles are controlled by adjustment of the residence time and the temperature. As a second step, the zinc sulfide capping under homogenous conditions is carried out at a substantially lower temperature than is required for nanoparticle growth in batch processes. Finally, the trioctylphosphine/oleic acid ligand is effectively replaced with either carbohydrate PEG-thiol moieties or DHLA at 60 °C. This new protocol allows the synthesis of biologically active fluorescent QDs in 4 d.     

L‐Cysteine capped CdTe–CdS core–shell quantum dots: preparation,characterization and immuno‐labeling of HeLa cells

Functionalized CdTe–CdS core–shell quantum dots (QDs) were synthesized in aqueous solution via water‐bathing combined hydrothermal method using L‐cysteine (L‐Cys) as a stabilizer. This method possesses both the advantages of water‐bathing and hydrothermal methods for preparing high‐quality QDs with markedly reduced synthesis time, and better stability than a lone hydrothermal method. The QDs were characterized by transmission electronic microscopy and powder X‐ray diffraction and X‐ray photoelectron spectroscopy. The CdTe–CdS QDs with core–shell structure showed both enhanced fluorescence and better photo stability than nude CdTe QDs. After conjugating with antibody rabbit anti‐CEACAM8 (CD67), the as‐prepared l ‐Cys capped CdTe–CdS QDs were successfully used as fluorescent probes for the direct immuno‐labeling and imaging of HeLa cells. It was indicated that this kind of QD would have application potential in bio‐labeling and cell imaging. Copyright © 2009 John Wiley & Sons, Ltd.     

Significant improvement in photoluminescence of ZnSe(S) alloyed quantum dots prepared in high pH solution

In this paper, we described a simple approach for aqueous synthesis of highly luminescent ZnSe(S) alloyed quantum dots (QDs) in the presence of 3‐mercaptopropionic acid as stabilizers using zinc chloride and NaHSe as precursors. The synthesis conditions were systematically investigated. We observed that the pH value of the Zn precursor solution had significant influence on the optical properties and the structure of the as‐prepared ZnSe(S) QDs. The optimal pH value and molar ratio of Zn²⁺ to HSe^? were 12.0 and 25 : 1 respectively. Under the optimal conditions, we prepared highly photoluminescent ZnSe(S) QDs at up to 31% quantum yield (compared with Rhodamine 6G). The characterization of HRTEM and XRD showed that the ZnSe(S) QDs had good monodispersity and nice crystal structure. The fluorescence life time spectra demonstrated that ZnSe(S) QDs had a long lifetime in contrast to fluorescent dyes. Compared with the currently used organometallic approach, our method was ‘green’, the reaction condition was mild and the as‐prepared ZnSe(S) QDs were water‐soluble. More importantly, our method was low cost, and was very suitable for large‐scale synthesis of highly luminescent ZnSe(S) QDs for the future applications. Copyright © 2009 John Wiley & Sons, Ltd.     

H2O2‐ and pH‐sensitive CdTe quantum dots as fluorescence probes for the detection of glucose

A novel fluorescence assay system for glucose was developed with thioglycollic acid (TGA)‐capped CdTe quantum dots (QDs) as probes. The luminescence quantum yield of the TGA‐capped CdTe QDs was highly sensitive to H₂O₂ and pH. In the presence of glucose oxidase, glucose is oxidized to yield, gluconic acid and H₂O₂. H₂O₂ and H⁺ (dissociated from gluconic acid) intensively quenched the fluorescence of QDs. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 0.01–5.0 mm under optimized experimental conditions. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, high flexibility, and good sensitivity. Furthermore, no complicated chemical modification of QDs and enzyme immobilization was needed in this system. Copyright © 2012 John Wiley & Sons, Ltd.     

A nanoprobe for nonprotein thiols based on assembling of QDs and 4-amino-2,2,6,6-tetramethylpiperidine oxide

A new fluorescent nanoprobe, 4-amino-2,2,6,6-tetramethylpiperidine oxide (AT)-functionalized CdTe quantum dots (QDs-AT), was synthesized, for selective detection of nonprotein thiols based on electron transfer (ET). In the presence of nonprotein thiols, the nitroxide radicals in QDs-AT were converted to hydroxylamines, resulting in the fluorescence recovery of the quenched QDs. The detection mechanism of the probe was investigated using Rh-Se-2 probe. The nanoprobe has high sensitivity toward glutathione (GSH) with a detection limit of 7.1 × 10?? M. The fluorescent imaging of living cells showed that QDs-AT could distinguish the concentration differences of GSH in HL-7702 and HepG2 cells.     

Temperature Driven Plasmon-Exciton Coupling in Thermoresponsive Dextran-Graft-PNIPAM/Au Nanoparticle/CdTe Quantum Dots Hybrid Nanosystem

The temperature-driven plasmon-exciton coupling in thermoresponsive dextran-graft-PNIPAM/Au nanoparticle/CdTe quantum dot (D-g-PNIPAM/Au NPs/CdTe QDs) hybrid nanosystem was studied. A significant (0.84 eV) splitting of the absorption peak was observed in the absorption spectrum of the nanosystem, which reflects the fact of formation of plexcitons, occurring due to strong plasmon-exciton coupling. An increasing with time plasmonic enhancement of the photoluminescence of CdTe QDs was revealed, as a result of the penetration of quantum dots into the volume of the D-g-PNIPAM/Au NP hybrid nanosystem and bonding to it. The heating–cooling cycle of the aqueous solution of the studied nanosystem leads to a reversible quenching-recovery alteration of the QD photoluminescence. The quenching was rationalized as a result of an increased probability of nonradiative resonance energy transfer (RET) from CdTe QDs to Au NPs, which occurs due to shortening of the NP-QD distance, caused by shrinking of the macromolecule due to cooling-induced lower critical solution temperature phase transition. Increasing the NP-QD distance in the heating stage recovers the QD PL intensity. The observed effect opens up opportunities for the controlled reversible temperature-driven tuning of the photoluminescence intensity of D-g-PNIPAM/Au NP/CdTe QD nanosystem, which is highly important for its potential use in photonics and biomedical applications.

     

Aqueous synthesis of highly stable CdTe/ZnS Core/Shell quantum dots for bioimaging

In this work, we report the synthesis, characterization and biological application of highly stable CdTe/ZnS (cadmium tellurite/zinc sulphide) Core/Shell (CS) quantum dots (QDs) capped with mercaptosuccinic acid (MSA). The CS QDs were synthesized using a simple one‐pot aqueous method. The synthesized CdTe/ZnS CS QDs were found to exhibit excellent stability even 100 days after preparation and also showed better photoluminescence quantum yield (PLQY) of about 50% compared with that of only CdTe QDs which was nearly 12%. The formation of the CdTe/ZnS CS was confirmed by high‐resolution transmission electron microscopy (HR‐TEM), and Fourier transform infra‐red (FTIR) and X‐ray diffraction (XRD) analyses. Further, on extending our study towards bioimaging of E. coli cells using the QDs samples, we found that CdTe/ZnS CS QDs showed better results compared with CdTe QDs.     

Facile synthesis and photophysical characterization of luminescent CdTe quantum dots for Forster resonance energy transfer based immunosensing of staphylococcal enterotoxin B

Aqueous phase synthesis of CdTe quantum dots (QDs) with surface functionalization for bioconjugation remains the best approach for biosensing and bioimaging applications. We present a facile aqueous phase method to prepare CdTe QDs by adjusting precursor and ligand concentrations. CdTe QDs had photoluminescence quantum yield up to ≈33% with a narrow spectral distribution. The powder X‐ray diffraction profile elucidated characteristic broad peaks of zinc blende cubic CdTe nanoparticles with 2.5–3 nm average crystalline size having regular spherical morphology as revealed by transmission electron microscopy. Infra‐red spectroscopy confirmed disappearance of characteristic absorptions for –SH thiols inferring thiol coordinated CdTe nanoparticles. The effective molar concentration of 1 : 2.5 : 0.5 respectively for Cd²⁺/3‐mercaptopropionic acid/HTe^– at pH 9 ± 0.2 resulted in CdTe quantum dots of 2.2–3.06 nm having band gap in the range 2.74–2.26 eV respectively. Later, QD₅₂₃ and QD₆₀₁ were used for monitoring staphylococcal enterotoxin B (SEB; a bacterial superantigen responsible for food poisoning) using Forster resonance energy transfer based two QD fluorescence. QD₅₂₃ and QD₆₀₁ were bioconjugated to anti‐SEB IgY antibody and SEB respectively according to carbodiimide protocol. The mutual affinity between SEB and anti‐SEB antibody was relied upon to obtain efficient energy transfer between respective QDs resulting in fluorescence quenching of QD₅₂₃ and fluorescence enhancement of QD₆₀₁. Presence of SEB in the range 1–0.05 µg varied the rate of fluorescence quenching of QD₅₂₃, thereby demonstrating efficient use of QDs in the Forster resonance energy transfer based immunosensing method by engineering the QD size. Copyright © 2012 John Wiley & Sons, Ltd.     

A simple and sensitive label‐free fluorescence sensing of heparin based on Cdte quantum dots

A rapid, simple and sensitive label‐free fluorescence method was developed for the determination of trace amounts of an important drug, heparin. This new method was based on water‐soluble glutathione‐capped CdTe quantum dots (CdTe QDs) as the luminescent probe. CdTe QDs were prepared according to the published protocol and the sizes of these nanoparticles were verified through transmission electron microscopy (TEM), X‐ray diffraction (XRD) and dynamic light scattering (DLS) with an average particle size of about 7 nm. The fluorescence intensity of glutathione‐capped CdTe QDs increased with increasing heparin concentration. These changes were followed as the analytical signal. Effective variables such as pH, QD concentration and incubation time were optimized. At the optimum conditions, with this optical method, heparin could be measured within the range 10.0–200.0 ng mL^?1 with a low limit of detection, 2.0 ng mL^?1. The constructed fluorescence sensor was also applied successfully for the determination of heparin in human serum. Copyright © 2015 John Wiley & Sons, Ltd.     

Quantum dots as nano plug-in's for efficient NADH resonance energy routing

The routing of fluorescent signals from NADH to quantum dots (QDs) has been a subject of extensive research for FRET based applications. In the present study, the spectral cross talk of NAD(+)/NADH with QDs was used to monitor the reaction of NAD(+)-dependent dehydrogenase enzyme. CdTe QD may undergo dipolar interaction with NADH as a result of broad spectral absorption due to multiple excitonic states resulting from quantum confinement effects. Thus, non-radiative energy transfer can take place from NADH to CdTe QD enhancing QDs fluorescence. Energy routing assay of NADH-QD was applied for detection of formaldehyde as a model analyte in the range 1000-0.01 ng/mL by the proposed technique. We observed proportionate quenching of CdTe QD fluorescence by NAD(+) and enhancement in the presence of NADH formed by various concentrations of enzyme (0.028-0.4 U). Hence, it was possible to detect formaldehyde in the range 1000-0.01 ng/mL with a limit of detection (LOD) at 0.01 ng/mL and regression coefficient R(2)=0.9982. Therefore, a unique optical sensor was developed for the detection of the formaldehyde in sensitive level based on the above mechanism. This method can be used to follow the activity of NAD(+)-dependent enzymes and detection of dehydrogenases in general.