Adhesion and motility of gliding bacteria on substrata with different surface free energies.

The adhesion and motility of several aquatic and terrestrial gliding bacteria on slides differing in their critical surface energies have been examined. In general, adhesion was tenacious on low-critical surface energy (hydrophobic) surfaces and tenuous on hydrophilic surfaces. Gliding was inhibited on very hydrophobic substrata and skittish on very hydrophilic surfaces.     

Adhesion and motility of gliding bacteria on substrata with different surface free energies

The adhesion and motility of several aquatic and terrestrial gliding bacteria on slides differing in their critical surface energies have been examined. In general, adhesion was tenacious on low-critical surface energy (hydrophobic) surfaces and tenuous on hydrophilic surfaces. Gliding was inhibited on very hydrophobic substrata and skittish on very hydrophilic surfaces.     

A live bioprobe for studying diatom-surface interactions

Atomic force microscopy has been employed to compare the adhesion of Navicula species I diatoms to surfaces of a hydrophobic elastomer, Intersleek, and a hydrophilic mineral, mica. This was accomplished using tipless atomic force microscopy cantilevers functionalized with live diatom cells. Both surfaces were tested with the same diatom bioprobe. Force versus distance curves generated during these experiments revealed comparable cell adhesion strengths on Intersleek and mica, indicating that Navicula diatoms secrete extracellular polymeric substances with hydrophobic and hydrophilic properties. A statistical analysis of force curves was carried out and the average values of works of detachment of a diatom from Intersleek and mica surfaces were determined.     

Comparison of the fouling release properties of hydrophobic fluorinated and hydrophilic PEGylated block copolymer surfaces: attachment strength of the diatom Navicula and the green alga Ulva

To understand the role of surface wettability in adhesion of cells, the attachment of two different marine algae was studied on hydrophobic and hydrophilic polymer surfaces. Adhesion of cells of the diatom Navicula and sporelings (young plants) of the green macroalga Ulva to an underwater surface is mainly by interactions between the surface and the adhesive exopolymers, which the cells secrete upon settlement and during subsequent colonization and growth. Two types of block copolymers, one with poly(ethylene glycol) side-chains and the other with liquid crystalline, fluorinated side-chains, were used to prepare the hydrophilic and hydrophobic surfaces, respectively. The formation of a liquid crystalline smectic phase in the latter inhibited molecular reorganization at the surface, which is generally an issue when a highly hydrophobic surface is in contact with water. The adhesion strength was assessed by the fraction of settled cells (Navicula) or biomass (Ulva) that detached from the surface in a water flow channel with a wall shear stress of 53 Pa. The two species exhibited opposite adhesion behavior on the same sets of surfaces. While Navicula cells released more easily from hydrophilic surfaces, Ulva sporelings showed higher removal from hydrophobic surfaces. This highlights the importance of differences in cell-surface interactions in determining the strength of adhesion of cells to substrates.     

Listeria monocytogenes LO28: surface physicochemical properties and ability to form biofilms at different temperatures and growth phases

The surface physicochemical properties of Listeria monocytogenes LO28 under different conditions (temperature and growth phase) were determined by use of microelectrophoresis and microbial adhesion to solvents. The effect of these parameters on adhesion and biofilm formation by L. monocytogenes LO28 on hydrophilic (stainless steel) and hydrophobic (polytetrafluoroethylene [PTFE]) surfaces was assessed. The bacterial cells were always negatively charged and possessed hydrophilic surface properties, which were negatively correlated with growth temperature. The colonization of the two surfaces, monitored by scanning electron microscopy, epifluorescence microscopy, and cell enumeration, showed that the strain had a great capacity to colonize both surfaces whatever the incubation temperature. However, biofilm formation was faster on the hydrophilic substratum. After 5 days at 37 or 20 degrees C, the biofilm structure was composed of aggregates with a three-dimensional shape, but significant detachment took place on PTFE at 37 degrees C. At 8 degrees C, only a bacterial monolayer was visible on stainless steel, while no growth was observed on PTFE. The growth phase of bacteria used to inoculate surfaces had a significant effect only in some cases during the first steps of biofilm formation. The surface physicochemical properties of the strain are correlated with adhesion and surface colonization.     

Development of pure culture biofilms of P. putida on solid supports

Pseudomonas putida biofilms were developed on and biofilm accumulation rate data were obtained for the following two classes of support materials: charged surfaces and noncharged hydrophobic and hydrophilic surfaces. The effects of surface roughness and porosity on the rate of microbial attachment were also examined.Materials bearing a net positive or negative surface charge supported the greatest biofilm accumulation and the highest biofilm accumulation rate. Uncharged hydrophobic materials achieved the next greatest biofilm accumulation, averaging approximately 50% of the total biomass which was accumulated on the charged surface materials after 16 days. Uncharged hydrophilic materials supported very little biofilm development. In general, biofilm accumulation increased with decreased surface roughness. The effect of pore size on biofilm accumulation was not conclusive.The biofilm accumulation kinetics showed an exponential accumulation rate for the charged surfaces and an approximately linear accumulation rate for the hydrophobic materials. This difference in accumulation kinetics is consistent with proposed differences in the physicochemical mechanism governing attachment to these two types of surface materials.     

Vascular smooth muscle cells on polyelectrolyte multilayers: hydrophobicity-directed adhesion and growth

Polyelectrolyte multilayer films were employed to support attachment of cultured rat aortic smooth muscle A7r5 cells. Like smooth muscle cells in vivo, cultured A7r5 cells are capable of converting between a nonmotile "contractile" phenotype and a motile "synthetic" phenotype. Polyelectrolyte films were designed to examine the effect of surface charge and hydrophobicity on cell adhesion, morphology, and motility. The hydrophobic nature and surface charge of different polyelectrolyte films significantly affected A7r5 cell attachment and spreading. In general, hydrophobic polyelectrolyte film surfaces, regardless of formal charge, were found to be more cytophilic than hydrophilic surfaces. On the most hydrophobic surfaces, the A7r5 cells adhered, spread, and exhibited little indication of motility, whereas on the most hydrophilic surfaces, the cells adhered poorly if at all and when present on the surface displayed characteristics of being highly motile. The two surfaces that minimized cell adhesion consisted of two varieties of a diblock copolymer containing hydrophilic poly(ethylene oxide) and a copolymer bearing a zwitterionic group AEDAPS, (3-[2-(acrylamido)-ethyldimethyl ammonio] propane sulfonate). Increasing the proportion of AEDAPS in the copolymer decreased the adhesion of cells to the surface. Cells presented with micropatterns of cytophilic and cytophobic surfaces generated by polymer-on-polymer stamping displayed a surface-dependent cytoskeletal organization and a dramatic preference for adhesion to, and spreading on, the cytophilic surface, demonstrating the utility of polyelectrolyte films in manipulating smooth muscle cell adhesion and behavior.     

Retention of bacteria on a substratum surface with micro-patterned hydrophobicity

Bacteria adhere to almost any surface, despite continuing arguments about the importance of physico-chemical properties of substratum surfaces, such as hydrophobicity and charge in biofilm formation. Nevertheless, in vivo biofilm formation on teeth and also on voice prostheses in laryngectomized patients is less on hydrophobic than on hydrophilic surfaces. With the aid of micro-patterned surfaces consisting of 10-microm wide hydrophobic lines separated by 20-microm wide hydrophilic spacings, we demonstrate here, for the first time in one and the same experiment, that bacteria do not have a strong preference for adhesion to hydrophobic or hydrophilic surfaces. Upon challenging the adhering bacteria, after deposition in a parallel plate flow chamber, with a high detachment force, however, bacteria were easily wiped-off hydrophobic lines, most notably when these lines were oriented parallel to the direction of flow. Adhering bacteria detached slightly less from the hydrophilic spacings in between, but preferentially accumulated adhering on the hydrophilic regions close to the interface between the hydrophilic spacings and hydrophobic lines. It is concluded that substratum hydrophobicity is a major determinant of bacterial retention while it hardly influences bacterial adhesion.     

Influence of cell surface characteristics on adhesion of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to the biomaterial hydroxylapatite

The influence of the physicochemical properties of biomaterials on microbial cell adhesion is well known, with the extent of adhesion depending on hydrophobicity, surface charge, specific functional groups and acid–base properties. Regarding yeasts, the effect of cell surfaces is often overlooked, despite the fact that generalisations may not be made between closely related strains. The current investigation compared adhesion of three industrially relevant strains of Saccharomyces cerevisiae (M-type, NCYC 1681 and ALY, strains used in production of Scotch whisky, ale and lager, respectively) to the biomaterial hydroxylapatite (HAP). Adhesion of the whisky yeast was greatest, followed by the ale strain, while adhesion of the lager strain was approximately 10-times less. According to microbial adhesion to solvents (MATS) analysis, the ale strain was hydrophobic while the whisky and lager strains were moderately hydrophilic. This contrasted with analyses of water contact angles where all strains were characterised as hydrophilic. All yeast strains were electron donating, with low electron accepting potential, as indicated by both surface energy and MATS analysis. Overall, there was a linear correlation between adhesion to HAP and the overall surface free energy of the yeasts. This is the first time that the relationship between yeast cell surface energy and adherence to a biomaterial has been described.     

Forces involved in adhesion of Bacillus cereus spores to solid surfaces under different environmental conditions

The adhesion of Bacillus cereus spores (NCTC 2599) to hydrophobic and hydrophilic glass surfaces was studied when environmental conditions were varied. The spores were exposed in media of different polarities as well as different pH and ionic concentrations. With increasing ethanol concentrations, the polarity of the medium was decreased and the predominant force of attraction was found to be hydrophobic. The spore surface was uncharged at a pH around 3, at which value the spore was most adhesive to both hydrophobic and hydrophilic glass. This could be attributable to the absence of electrostatic repulsion. An increased ionic concentration of the bulk increased the degree of adhesion especially to the hydrophilic surfaces. This indicates the suppression of a solvation barrier at high ionic concentrations, when the polymers of the spore surface become dehydrated.     

Forces involved in adhesion of Bacillus cereus spores to solid surfaces under different environmental conditions

H usmark , U. & R önner , U. 1990. Forces involved in adhesion of Bacillus cereus spores to solid surfaces under different environmental conditions. Journal of Applied Bacteriology 69 , 557–562.
The adhesion of Bacillus cereus spores (NCTC 2599) to hydrophobic and hydro-philic glass surfaces was studied when environmental conditions were varied. The spores were exposed in media of different polarities as well as different pH and ionic concentrations. With increasing ethanol concentrations, the polarity of the medium was decreased and the predominant force of attraction was found to be hydrophobic. The spore surface was uncharged at a pH around 3, at which value the spore was most adhesive to both hydrophobic and hydrophilic glass. This could be attributable to the absence of electrostatic repulsion. An increased ionic concentration of the bulk increased the degree of adhesion especially to the hydrophilic surfaces. This indicates the suppression of a solvation barrier at high ionic concentrations, when the polymers of the spore surface become dehydrated.     

Listeria monocytogenes LO28: Surface Physicochemical Properties and Ability To Form Biofilms at Different Temperatures and Growth Phases

The surface physicochemical properties of Listeria monocytogenes LO28 under different conditions (temperature and growth phase) were determined by use of microelectrophoresis and microbial adhesion to solvents. The effect of these parameters on adhesion and biofilm formation by L. monocytogenes LO28 on hydrophilic (stainless steel) and hydrophobic (polytetrafluoroethylene [PTFE]) surfaces was assessed. The bacterial cells were always negatively charged and possessed hydrophilic surface properties, which were negatively correlated with growth temperature. The colonization of the two surfaces, monitored by scanning electron microscopy, epifluorescence microscopy, and cell enumeration, showed that the strain had a great capacity to colonize both surfaces whatever the incubation temperature. However, biofilm formation was faster on the hydrophilic substratum. After 5 days at 37 or 20°C, the biofilm structure was composed of aggregates with a three-dimensional shape, but significant detachment took place on PTFE at 37°C. At 8°C, only a bacterial monolayer was visible on stainless steel, while no growth was observed on PTFE. The growth phase of bacteria used to inoculate surfaces had a significant effect only in some cases during the first steps of biofilm formation. The surface physicochemical properties of the strain are correlated with adhesion and surface colonization.     

Adhesion of the entomopathogenic fungus Beauveria (Cordyceps) bassiana to substrata

The entomopathogenic fungus Beauveria bassiana produces at least three distinct single-cell propagules, aerial conidia, vegetative cells termed blastospores, and submerged conidia, which can be isolated from agar plates, from rich broth liquid cultures, and under nutrient limitation conditions in submerged cultures, respectively. Fluorescently labeled fungal cells were used to quantify the kinetics of adhesion of these cell types to surfaces having various hydrophobic or hydrophilic properties. Aerial conidia adhered poorly to weakly polar surfaces and rapidly to both hydrophobic and hydrophilic surfaces but could be readily washed off the latter surfaces. In contrast, blastospores bound poorly to hydrophobic surfaces, forming small aggregates, bound rapidly to hydrophilic surfaces, and required a longer incubation time to bind to weakly polar surfaces than to hydrophilic surfaces. Submerged conidia displayed the broadest binding specificity, adhering to hydrophobic, weakly polar, and hydrophilic surfaces. The adhesion of the B. bassiana cell types also differed in sensitivity to glycosidase and protease treatments, pH, and addition of various carbohydrate competitors and detergents. The outer cell wall layer of aerial conidia contained sodium dodecyl sulfate-insoluble, trifluoroacetic acid-soluble proteins (presumably hydrophobins) that were not present on either blastospores or submerged conidia. The variations in the cell surface properties leading to the different adhesion qualities of B. bassiana aerial conidia, blastospores, and submerged conidia could lead to rational design decisions for improving the efficacy and possibly the specificity of entomopathogenic fungi for host targets.     

Adhesion of bacillus spores in relation to hydrophobicity

The adhesion of spores of five different Bacillus species to solid surfaces of different hydrophobicity was evaluated. The spore surface hydrophobicity was measured using hydrophobic interaction chromatography (HIC). A large variation in hydrophobicity was found among the spores of the different species tested. The degree of adhesion of spores to the solid surfaces was consistent with the results obtained using the HIC method. The most hydrophobic spores, according to the HIC method, adhered in a much larger extent to the hydrophobic surfaces. Furthermore, spores generally adhered to a greater extent to hydrophobic and hydrophilic surfaces than did the vegetative cells.     

Adhesion of the Entomopathogenic Fungus Beauveria (Cordyceps) bassiana to Substrata

The entomopathogenic fungus Beauveria bassiana produces at least three distinct single-cell propagules, aerial conidia, vegetative cells termed blastospores, and submerged conidia, which can be isolated from agar plates, from rich broth liquid cultures, and under nutrient limitation conditions in submerged cultures, respectively. Fluorescently labeled fungal cells were used to quantify the kinetics of adhesion of these cell types to surfaces having various hydrophobic or hydrophilic properties. Aerial conidia adhered poorly to weakly polar surfaces and rapidly to both hydrophobic and hydrophilic surfaces but could be readily washed off the latter surfaces. In contrast, blastospores bound poorly to hydrophobic surfaces, forming small aggregates, bound rapidly to hydrophilic surfaces, and required a longer incubation time to bind to weakly polar surfaces than to hydrophilic surfaces. Submerged conidia displayed the broadest binding specificity, adhering to hydrophobic, weakly polar, and hydrophilic surfaces. The adhesion of the B. bassiana cell types also differed in sensitivity to glycosidase and protease treatments, pH, and addition of various carbohydrate competitors and detergents. The outer cell wall layer of aerial conidia contained sodium dodecyl sulfate-insoluble, trifluoroacetic acid-soluble proteins (presumably hydrophobins) that were not present on either blastospores or submerged conidia. The variations in the cell surface properties leading to the different adhesion qualities of B. bassiana aerial conidia, blastospores, and submerged conidia could lead to rational design decisions for improving the efficacy and possibly the specificity of entomopathogenic fungi for host targets.     

Features of the initial stage of surface colonization by Eshcherichia coli cells as a function of their mobility and chemotaxis]

Dependence of adhesion and colonization of hydrophilic and hydrophobic surfaces by Escherichia coli strains with different mobility and chemotaxis was studied using E. coli mot+che+, E. coli mot+che-, E. coli mot-che+. Primary adhesion was shown to correlate with mobility of cells and hydrophilic/hydrophobic character of their surface. Secondary adhesion correlated in addition with chemotactic characteristics of bacteria. E. coli populations were shown to vary in electrophoretic mobility and cells capability for adhesion and chemotaxis.     

Adhesion of algal cells to surfaces

This paper reports the cell–substratum interactions of planktonic (Chlorella vulgaris) and benthic (Botryococcus sudeticus) freshwater green algae with hydrophilic (glass) and hydrophobic (indium tin oxide) substrata to determine the critical parameters controlling the adhesion of algal cells to surfaces. The surface properties of the algae and substrata were quantified by measuring contact angle, electrophoretic mobility, and streaming potential. Using these data, the cell–substratum interactions were modeled using thermodynamic, DLVO, and XDLVO approaches. Finally, the rate of attachment and the strength of adhesion of the algal cells were quantified using a parallel-plate flow chamber. The results indicated that (1) acid–base interactions played a critical role in the adhesion of algae, (2) the hydrophobic alga attached at a higher density and with a higher strength of adhesion on both substrata, and (3) the XDLVO model was the most accurate in predicting the density of cells and their strength of adhesion. These results can be used to select substrata to promote/inhibit the adhesion of algal cells to surfaces.     

Atomic force microscopy and hydrodynamic characterization of the adhesion of <Emphasis Type="Italic">staphylococcus aureus</Emphasis> to hydrophilic and hydrophobic substrata at different pH values

Understanding the mechanism of the bacterial cell adhesion to solid surfaces is of great medical and industrial importance. Bacterial adhesion to inert surfaces, such as a catheter, and other indwelling devices can form biofilm, consequently cause severe morbidity and often fatal infections. Initial bacterial adhesion to the material surfaces is a complicated process that is affected by various physicochemical properties of both bacterial cells and substratum surfaces. The surface properties of the cells were characterized by the sessile drop technique. Moreover, the interfacial free energy of Staphylococcus aureus adhesion to the supporting materials was determined. The results showed that S. aureus examined at different pH levels could be considered hydrophilic. We noted hat the electron-donor character of S. aureus was important at intermediate pH (pH 5, pH 7, and pH 9) and it decreased at both limits acidic and basic conditions. In addition, the adhesion of Staphylococcus aureus ATCC 25923 to the hydrophilic glass and hydrophobic indium tin oxide (ITO)-coated glass surfaces at different pH values (2, 3, 5, 7, 9 and 11) was investigated using atomic force microscopy (AFM) and image analysis was assessed with the Mathlab^® program. The data analysis showed that cells (number of adhering cells to glass and ITO-coated glass surface) adhered strongly at acidic pH and weakly at alkaline pH. Also, S. aureus has the ability to attach to both hydrophobic and hydrophilic surfaces, but the adhesion was higher on hydrophobic surface.     

Effect of Cetylpyridinium Chloride on Microbial Adhesion to Hexadecane and Polystyrene

Microbial adhesion at the oil-water interface is a subject of both basic interest (e.g., as a technique for the measurement of hydrophobicity) and applied interest (e.g., for use in two-phase oil-water mouthwashes for the desorption of oral microorganisms). In general, surfactants inhibit microbial adhesion to oils and other hydrophobic surfaces. In the present study, we demonstrated that the cationic surfactant cetylpyridinium chloride (CPC) significantly enhanced microbial adhesion to hexadecane and various oils, as well as to the solid hydrophobic surface polystyrene. CPC increased adhesion to hexadecane of Escherichia coli, Candida albicans and Acinetobacter calcoaceticus MR-481 and of expectorated oral bacteria from near 0% to over 90%. The CPC concentration required for optimal enhancement of adhesion was a function of the initial cell density. This phenomenon was inhibited by high salt concentrations and, in the case of E. coli, by a low pH. CPC-pretreated cells were able to bind to hexadecane, but CPC-pretreated hexadecane was unable to bind untreated cells. Another cationic, surface-active antimicrobial agent, chlorhexidine gluconate, was similarly able to promote microbial adhesion to hexadecane. The results suggest that (i) CPC enhances microbial adhesion to hexadecane by binding via electrostatic interactions at the cell surface, thus diminishing surface charge and increasing cell surface hydrophobicity, and (ii) this phenomenon may have applications in oral formulations and in the use of hydrocarbon droplets as a support for cell immobilization.     

Adhesion of bacillus spores in relation to hydrophobicity

R önner , U., H usmark , U. & H enriksson , A. 1990. Adhesion of bacillus spores in relation to hydrophobicity. Journal of Applied Bacteriology 69 , 550–556.
The adhesion of spores of five different Bacillus species to solid surfaces of different hydrophobicity was evaluated. The spore surface hydrophobicity was measured using hydrophobic interaction chromatography (HIC). A large variation in hydrophobicity was found among the spores of the different species tested. The degree of adhesion of spores to the solid surfaces was consistent with the results obtained using the HIC method. The most hydrophobic spores, according to the HIC method, adhered in a much larger extent to the hydrophobic surfaces. Furthermore, spores generally adhered to a greater extent to hydrophobic and hydrophilic surfaces than did the vegetative cells.