Weak gel of chitin with ionic liquid, 1-allyl-3-methylimidazolium bromide

This paper reports the formation of weak gel of chitin with an ionic liquid, 1-allyl-3-methylimidazolium bromide (IL). When a mixture of 5% (w/w) chitin with IL was heated at 100 °C for 48 h, the clear liquid was obtained. The experimental process was observed by the CCD camera view and the SEM analysis. From a mixture of chitin with IL in the higher concentration (7%, w/w), a more viscous material, i.e., a gel-like material was obtained. The rheological evaluations showed that both 5% (w/w) and 7% (w/w) chitins with IL behaved as weak gels.     

Chitin and chitosan from Basidiomycetes

Chitinous material was isolated from the mycelium of seven species of Basidiomycetes to evaluate the possibility of using fungal biomass as a source of chitin and chitosan. Such material was characterised for its purity, degree of acetylation and crystallinity. Chitin yields ranged between 8.5 and 19.6% dry weight and the chitosan yield was approximately 1%. The characteristics of the fungal chitins were similar to those of commercial chitin. Chitosans, with a low degree of acetylation, comparable with that of commercial chitosan, were obtained by the chemical deacetylation of fungal chitins.     

TEMPO-mediated oxidation of chitin, regenerated chitin and N-acetylated chitosan

A commercial chitin, regenerated chitin prepared from chitin solutions in 6.8% NaOH and N-acetylated chitosans with degrees of N-acetylation (DNAc) of 77–93% were subjected to oxidization in water with NaClO and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxy radical (TEMPO) and NaBr. When regenerated chitin with DNAc of 87% and N-acetylated chitosan with DNAc of 93% were used as starting materials, water-soluble β-1,4-linked poly-N-acetylglucosaminuronic acid (chitouronic acid) Na salts with degrees of polymerization of ca. 300 were obtained quantitatively within 70 min. On the other hand, the original chitin and N-acetylated chitosan with DNAc of 77% did not give water-soluble products, owing to incomplete oxidation. The high crystallinity of the original chitin brought about low reactivity, and the high C2-amino group content of the N-acetylated chitosan with DNAc of 77% led to degradations rather than the selective oxidation at the C6 hydroxyls. The obtained chitouronic acid had low viscosities in water, and clear biodegradability by soil microorganisms.     

Chitin nanocrystals prepared by TEMPO-mediated oxidation of alpha-chitin

Chitin nanocrystals dispersed in water were successfully prepared by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) mediated oxidation of alpha-chitin in water at pH 10 under specific conditions, followed by ultrasonic treatment. When the amount of NaClO added as co-oxidant in the oxidation was 5.0 mmol/g of chitin, the weight percentage of the water-insoluble fraction in the TEMPO-oxidized chitin was 90%, and its carboxylate content reached 0.48 mmol/g. Since the TEMPO-oxidized chitin thus prepared had a crystallinity as high as that of the original alpha-chitin, the C6 carboxylate groups formed by TEMPO-mediated oxidation can be regarded as being present only on the chitin crystallite surfaces. No N-deacetylation occurred on the TEMPO-oxidized chitins. When the TEMPO-oxidized chitin was subjected to ultrasonic treatment in water, mostly individualized chitin nanocrystals were obtained, and the average nanocrystal length and width were 340 and 8 nm, respectively.     

Differentiations of Chitin Content and Surface Morphologies of Chitins Extracted from Male and Female Grasshopper Species

In this study, we used Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), and scanning electron microscopy (SEM) to investigate chitin structure isolated from both sexes of four grasshopper species. FT-IR, EA, XRD, and TGA showed that the chitin was in the alpha form. With respect to gender, two main differences were observed. First, we observed that the quantity of chitin was greater in males than in females and the dry weight of chitin between species ranged from 4.71% to 11.84%. Second, using SEM, we observed that the male chitin surface structure contained 25 – 90nm wide nanofibers and 90 – 250 nm nanopores, while no pores or nanofibers were observed in the chitin surface structure of the majority of females (nanofibers were observed only in M. desertus females). In contrast, the elemental analysis, thermal properties, and crystalline index values for chitin were similar in males and females. Also, we carried out enzymatic digestion of the isolated chitins using commercial chitinase from Streptomyces griseus. We observed that there were no big differences in digestion rate of the chitins from both sexes and commercial chitin. The digestion rates were for grasshoppers’ chitins; 88.45–95.48% and for commercial chitin; 94.95%.     

Isolation and characterization of chitin from bumblebee (Bombus terrestris)

Insect chitin possessing shell-like structure was prepared from the bumblebee corpses by a consequent treatment with 1M HCl and 1M NaOH. The bumblebee chitin was compared with crustacean (shrimp) chitin by using elemental analysis, Fourier-transform infrared (FT-IR) and solid-state (13)C cross-polarization magic angle spinning nuclear magnetic resonance (CP/MAS)-NMR spectroscopy and confocal microscopy. Both chitins (bumblebee and shrimp) exhibited identical spectra, while the bumblebee chitin had a 5% lower degree of acetylation and was characterized by a fine membrane texture.     

Analysis of ellagic acid in pomegranate rinds by capillary electrophoresis and high-performance liquid chromatography

Two novel methods for the analysis of ellagic acid in pomegranate (Punica granatum) rinds are proposed. Capillary electrophoresis (CE) was performed in a bare fused-silica capillary using a buffer solution of tri(hydroxymethyl)aminomethane:potassium dihydrogen phosphate (pH 8.4) with an applied voltage of 20 kV and UV detection at 254 nm. HPLC analysis was performed with a Zobax SB C(18) column and a mobile phase consisting of methanol:ethyl acetate:potassium dihydrogen phosphate: phosphoric acid at a flow rate of 1.0 mL/min. Under optimised conditions, the HPLC retention and the CE migration times for ellagic acid were 10.32 and 12.23 min, respectively. Calibration curves of peak area vs. concentration gave correlation coefficients of 0.9999 for HPLC and 0.9990 for CE. The detection limits for HPLC and CE were 2.8 and 2.2 microg/mL, respectively. Average recoveries were 98.32 +/- 1.2% for HPLC and 96.52 +/- 2.8% for CE. Both methods were shown to be suitable for the determination of ellagic acid in pomegranate rinds extraction; however, the CE method required less solvent and gave better column efficiency, whilst the HPLC provided superior precision.     

Extraction and Characterization of α-Chitin and Chitosan from Six Different Aquatic Invertebrates

Chitin and chitosan were extracted from six different aquatic invertebrate species. Species dry weights varied between 5 % and 20 % chitin, and the chitosan productivity of these chitins varied between 66 % and 74 %. Chitin and chitosan structures were characterized by FTIR, TGA, XRD, and SEM. FTIR results showed that the chitins obtained from the organisms were observed in α form. Chitin thermal stabilities were in the order Ranatra linearis?>?Anax imperator?>?Hydrophilus piceus?>?Notonecta glauca?>?Agabus bipustulatus?>?Asellus aquaticus, and chitosan thermal stabilities in the order N. glauca?>?A. bipustulatus?>?A. imperator?>?R. linearis?>?H. piceus?>?A. aquaticus. The crystalline index values of chitins varied between 76.4 % and 90.6 %. Their surface morphology was examined by SEM, revealing nanofibre structures. These six aquatic invertebrate species with characterized chitin and chitosan structures may be used as alternative chitin and chitosan sources for various technological purposes.     

The degree of acetylation of chitins by gas chromatography and infrared spectroscopy

Gas chromatography of a number of amines, alcohols and sulfur derivatives was carried out on chitin and partially deacetylated chitins as well as on chitosan. The retention time of methanol is proportional to the degree of acetylation, and therefore a method is proposed for the gas-chromatographic determination of the degree of acetylation of chitin/chitosan. The analysis of the infrared spectra of chitin/chitosan also permits one to determine the degree of acetylation by using the ratio of the bands 1550 and 2878 cm^?1.     

Antihypertensive activity of chitin derivatives

To develop angiotensin I converting enzyme (ACE) inhibitory chitin derivatives based on the properties of ACE inhibitors, chitins with different degree of deacetylation were chemically modified by grafting 2-chloroethylamino hydrochloride onto chitin at the C-6 position. Three kinds of chitin derivatives were prepared and designated as aminoethyl-chitin (AEC) with 10% degree of deacetylation, aminoethyl-chitin with 50% degree of deacetylation (AEC50), and aminoethyl-chitin with 90% degree of deacetylation (AEC90). IC50 values of three chitin derivatives on ACE were 0.064 microM (AEC), 0.038 microM (AEC50), and 0.103 microM (AEC90). The results of Dixon plots revealed that AEC50 was a competitive inhibitor, and the inhibition constant (Ki) value was 0.021 microM. In addition, the antihypertensive effect of AEC50 on spontaneously hypertensive rats (SHR) was evaluated, and the result showed that it effectively decreased systolic blood pressure (SBP) in a dose-dependent manner.     

A plausible prebiotic synthesis of pyridoxal phosphate: vitamin B6 - a computational study

A set of chemical reactions is proposed to account for the formation of pyridoxal phosphate, Vitamin B6, from a primeval atmosphere composed of cyanoacetylene, diacetylene, carbon monoxide, hydrogen, water, and a phosphoric acid. The reactions have been shown to be feasible from the overall enthalpy changes in the ZKE approximation at the HF and MP2/6-31G* level.     

Enhancement of enzymatic saccharification of cellulose by cellulose dissolution pretreatments

Attempts were made to enhance cellulose saccharification by cellulase using cellulose dissolution as a pretreatment step. Four cellulose dissolution agents, NaOH/Urea solution, N-methylmorpholine-N-oxide (NMMO), ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and 85% phosphoric acid were employed to dissolve cotton cellulose. In comparison with conventional cellulose pretreatment processes, the dissolution pretreatments were operated under a milder condition with temperature <130 °C and ambient pressure. The dissolved cellulose was easily regenerated in water. The regenerated celluloses exhibited a significant improvement (about 2.7- to 4.6-fold enhancement) on saccharification rate during 1st h reaction. After 72 h, the saccharification yield ranged from 87% to 96% for the regenerated celluloses while only around 23% could be achieved for the untreated cellulose. Even with high crystallinity, cellulose regenerated from phosphoric acid dissolution achieved the highest saccharification rates and yield probably due to its highest specific surface area and lowest degree of polymerization (DP).     

Culture of Vibrio cholerae in presence of shrimp and crab chitin

In the culture of Vibrio cholerae in saline water containing purified chitin prepared from fresh shrimp and crab shells, it was determined that the solubility of chitin in salin water is influenced more by the salinity than by the pH, with the optimum being pH 8·0 and salinity 15 o/oo. The stimulation of growth by freshly extracted chitins and commercially available preparations was similar. All chitin preparations stimulated growth somewhat less than did alkaline peptone broth (a commonly used culture medium). All chitin sources also stimulated the production of cholera toxin by toxigenic strains to about the same extent as did alkaline peptone broth. The strains were found to be very low toxin producers in filtered bay water alone, thus indicating the need for some nutrient source for this activity.     

不同水平磷对磷饥饿墨兰某些生化特性的影响

本文研究不同水平磷对磷饥饿墨兰［Ｃｙｍｂｉｄｉｕｍｓｉｎｅｎｓｅ（Ａｎｄｒ．）Ｗｉｌｌｄ］植株某些生化特性的影响．随着ＮａＨ２ＰＯ４浓度的增高,植株中的无机磷酸、磷脂酸、肌醇六磷酸、磷酸已糖、高能磷酸化合物和核酸等的含量都有不同程度的提高,其中以肌醇六磷酸提高最显著．酸性磷酸酯酶活性与磷浓度呈负相关．０．２０ｍｍｏｌ／ＬＮａＨ２ＰＯ４可能基本满足墨兰植株生长的要求．缺磷时叶片的蛋白质、无机磷酸和可溶性糖的含量较低,而游离氨基酸和淀粉的含量较高．因此,缺磷条件下生长的植株矮小的原因,可能主要是缺乏蛋白质。     

Chitins and chitosans for the repair of wounded skin,nerve, cartilage and bone

This review provides a balanced integration of the most recent chemical, biochemical and medical information on the unique characteristics of chitins and chitosans in the area of animal/human tissue regeneration. Hemostasis is immediately obtained after application of most of the commercial chitin-based dressings to traumatic and surgical wounds: platelets are activated by chitin with redundant effects and superior performances compared with known hemostatic materials. To promote angiogenesis, necessary to support physiologically ordered tissue formation, the production of the vascular endothelial growth factor is strongly up-regulated in wound healing when macrophages are activated by chitin/chitosan. The inhibition of activation and expression of matrix metalloproteinases in primary human dermal fibroblasts by low MW chitosans prevents or solves problems caused by metalloproteinase-2 such as the hydrolysis of the basement membrane collagen IV. Experimental biocompatible wound dressings derived from chitin are today available in the form of hydrogels, xerogels, powders, composites, films and scaffolds: the latter are easily colonized by human cells in view of the restoration of tissue defects, with the advantage of avoiding retractive scar formation. The growth of nerve tissue has been guided with chitin tubes covalently coated with oligopeptides derived from laminin. The regeneration of cartilage is also feasible because chitosan maintains the correct morphology of chondrocytes and preserves their capacity to synthesize cell-specific extracellular matrix: chitosan scaffolds incorporating growth factors and morphogenetic proteins have been developed. Impressive advances have been made with osteogenic chitosan composites in treating bone defects, particularly with osteoblasts from mesenchymal stem cells in porous hydroxyapatite-chitin matrices. The introduction of azido functions in chitosan has provided photo-sensitive hydrogels that crosslink in a matter of seconds, thus paving the way to cytocompatible hydrogels for surgical use as coatings, scaffolds, drug carriers and implants capable to deliver cells and growth factors. The peculiar biochemical properties of chitins and chitosans remain unmatched by other polysaccharides.     

Optimization of the demineralization process for the extraction of chitin from Omani Portunidae segnis

Chitin is an organic polymer and it is the most frequent marine natural polysaccharide after cellulose. The main natural sources of chitin are exoskeletons of insects, mollusks, the cell walls of certain fungi and crustaceans such as crabs, shrimps and lobsters. The waste of these marine exoskeletons are pollutant for the environment, but these waste raw materials could be useful for production of commercial products like chitin. Chitin is an important raw material used for water treatment, agricultural, biomedical, biotechnological purposes, food and paper industry and cosmetics. Based on the variety of importance, the present targets of this study are to optimize the demineralization process for the removal of calcium and phosphate contents from the waste of Portunidae segnis (P. segnis) by using acid at ambient temperature and to characterize the isolated demineralized sample as well as the percentage of remaining calcium and phosphorus contents by using Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). The prepared waste carbs coarse powder samples of P. segnis were demineralized with seven different concentrations of hydrochloric acid at ambient temperature for 1 h. All the demineralization samples by the different concentrations were analyzed by using sensitive ICP-OES. The results based on ICP-OES showed that among the seven different concentrations used in the demineralization process for the isolation of chitin, the best was 2 M of HCl concentration for the production of chitin. The results also showed that the optimized concentration 2 M HCl gave the minimum concentration of calcium and phosphorus compared to other concentrations applied in this experiment. In conclusion, the optimized concentration for demineralization process could be used commercially for the isolation or commercial production of chitin for agricultural, biomedical and biotechnological purposes.     

Preparation, characterization and properties of aminoethyl chitin hydrogels

Aminoethyl chitins (AEC) with different amino contents were synthesized from chitin and 2-chlorethylamine hydrochloride, and the AEC hydrogels were prepared by crosslinking with glutaraldehyde. The microstructures, swelling behaviors and antibacterial activities of the hydrogels were investigated. The results of Fourier transform infrared spectroscopy (FTIR), (1)H nuclear magnetic resonance ((1)H NMR) spectrum and scanning electron microscopy (SEM) showed that the hydrogels were prepared by forming the Schiff base from AEC and glutaraldehyde. The aminoethyl chitin hydrogels were sensitive to acidic environment. The swelling ratio changed with the amino content of AEC, declined with the increase of the crosslinking agent concentration and increased with the increase of the AEC concentration. In addition, the antibacterial results of the hydrogels against Staphylococcus aureus (S. aureus) indicated that the hydrogels had good antibacterial activities, and the antibacterial properties were affected by the amino content of AEC and the crosslinking agent concentration.     

Comparison of physicochemical properties of chitins isolated from an insect (Melolontha melolontha) and a crustacean species (Oniscus asellus)

The chitin structures of two common European species belonging to Insecta (Melolontha melolontha) and Crustacea (Oniscus asellus) were isolated. The same procedure is followed for chitin isolations for both the species. First, HCl was used for removing of minerals in the organisms, and then, the protein structure was removed by using NaOH. Chitins obtained from these two species were characterized physicochemically. Physicochemical properties of chitins isolated from the insect and the crustacean were compared to each other. The chitin content for dry weights of M. melolontha and O. asellus were recorded as 13–14 and 6–7 %, respectively. The results of Fourier transform infrared spectroscopy, thermogravimetric analysis and X-ray diffraction analysis were found to be more or less similar. The surface morphologies of chitins were examined via environmental scanning electron microscopy and nanofibers, and pore structures were observed. While the chitin nanofibers of O. asellus were adherent to each other, nanofibers of M. melolontha were non-adherent. On the other hand, the number of pores was much higher in the chitin from M. melolontha than in the chitin from O. asellus. Looking at the elemental analysis results, the M. melolontha chitin was found to be more pure than the O. asellus chitin. For this reason, M. melolontha has been considered more attractive source for chitin than O. asellus.     

Solubility and property of chitin in NaOH/urea aqueous solution

NaOH/urea aqueous solution has been used as a solvent for chitin for the first time. Effects of this solvent composition and temperature on the solubility and stability of chitin solution were studied with an optical microscope, from which 8 wt% NaOH/4 wt% urea concentrations were deduced as suitable and −20 °C as the appropriate temperature. The original and regenerated chitin were characterized by viscosity, elemental analysis, FI-IR and X-RD analysis, and the effect of solvent composition and temperature on chitin structure was investigated. It was inferred that 8 wt% NaOH/4 wt% urea solvent under low temperature adventitiously has little effect on chitin structure and the urea is of benefit to the stability of chitin solution. In addition, the rheological properties suggested that chitin aqueous solution in high concentration is a pseudoplastic fluid and that chitin aqueous solution in low concentrations is a Newtonian fluid. This chitin aqueous solution is sensitive to temperature and will transform it to a gel when temperature increases.