Automicrite facies on steep slopes (Triassic, Dolomites, Italy)

Summary  The Triassic platforms of the Dolomite Alps of northern Italy are famous for their well-preserved platform flanks. We report on the discovery of extensive automicrite on these platform slopes. Automicrite stands for autochthonous micritic carbonate, formed by in-situ precipitation that was mediated by organisms. The automicrite occurs on the 400 m high, 25°–35° dipping slopes of the Sella platform that were pervasively dolomitized. Textures include peloidal aggregates (thrombolitic microfabric), irregular spar-filled cavities as well as biodetritus and are in many samples clearly visible despite the dolomitization. The peloids may occur as loose particles floating in lighter-colored cement or form a loosely connected framework. The preservation of automicrite textures along with the nearly unaltered slope geometry of the platform lead to several conclusions on the development of automicrite on such steep and high platform slopes.

Facies patterns of a tectonically-controlled Upper Triassic platform-slope carbonate depositional system (Carnian Prealps, Northeastern Italy)

Summary Upper Triassic (Middle-Upper Norian) shallow-water carbonates of the Dolomia Principale and its deep-water counterparts (Forni Dolomite) have been studied in the Carnian Prealps (northeastern Italy). The Dolomia Principale was a storm-dominated carbonate platform; in the Mt. Pramaggiore area, along a well-preserved 3.5 km-long platform-to-basin transition, the inner platform facies of the Dolomia Principale, characterized by m-scale shallowing upward cycles, give way seaward to open marine storm-dominated shallow subtidal lagoon deposits with frequent hardgrounds and evidence of microbial stabilization of the bottom sediment. The margin of the Dolomia Principale platform was colonized by meter-scale stromatolites and serpulid-microbial mounds that thrived due to the local highly stressed environment, characterized by drastic salinity fluctuations and turbid waters, that excluded the Upper Triassic coral-sponge communities. The Forni Dolomite slope-basin complex was characterized by an upper slope facies with debris flows, megabreccias, turbidites and serpulid-microbial mounds. The lower slope and basinal facies show thinning and fining trends. After restoring the original geometry of the slope, the depositional angles of the clinoforms range between 11 and 36 degrees, reflecting closely the coarse-grained character of the Forni Dolomite slope complex, which can be interpreted as a slope apron that, as a model, can be extended to steeply inclined carbonate slopes. The onset of synsedimentary extensional tectonics at the Middle-Late Norian boundary affected the platform-slope depositional system via: 1) localized inner platform collapses and the formation of an intraplatform anoxic depression at Mt. Valmenone, 2) a switch from platform lateral progradation during the Middle Norian to vertical aggradation in the Late Norian, reflected in an increase in platform relief, steeper foreslope angles and coarser-grained slope facies, and 3) controlling the spatial orientation of the margin of the Dolomia Principale.     

Youngest early carboniferous (late Visean) shallow-water patch reefs in eastern Australia (Rockhampton Group, Queensland): Combining quantitative micro- and macro-scale data

Summary Although skeletal organisms have received most of the emphasis in studies on Phanerozoic roef history, the roles of non-skeletal (non-enzymatic) carbonates (e.g., synsedimentary cements, automicrite, microbialite, etc.) in reef framework construction are becoming increasingly better understood. One problem in understanding the role of non-enzymatic carbonates in reef construction has been the difficulty in recognizing them in reef facies. Whereas skeletal organisms commonly can be recognized and documented in the field, non-enzymatic carbonates may be recognizable only in thin section. This paper describes the application of a new sampling technique that allows the quantitative comparison of skeletal macrofauna and flora with associated non-enzymatic carbonates and other microfaunal/microfloral constituents. The technique involves the point counting of thin sections made from small diameter cores that are systematically recovered from grids and line transects that cover a reasonable area (m²) of reef facies. Small, shallow-water patch reefs are abundant in scattered oolitic intervals in the Lower Carboniferous strata of eastern Australia. The youngest known Carboniferous reefs in eastern Australia occur in uppermost Visean strata (limestone FC5) near the top of the Rockhampton Group, approximately 50 km west-northwest of Rockhampton, Queensland. The largest sampled reef was 15 m thick and 42 m in diameter, with synsedimentary relief above the sea floor of at least 2 m during the primary growth phase. The reef occurs within bioclasticoolitic grainstones representing a shallow shelf setting and consists of eight common framework microfacies: 1) coral boundstone; 2) bryozoan boundstone; 3) mixed crinoid-bryozoan boundstone; 4) tubular problematica boundstone; 5) sponge-automicrite boundstone; 6) encrusted thrombolite boundstone; 7) mixed automicrite boundstone; and 8) thrombolitic wackestone-packstone. Reef growth was initiated by automicrite-producing biofilms, sponges and a tubular problematic organism. Primary relief building was accomplished by automicrite-dominated frameworks and lithistid sponges, crinoids, and corals. Large cerioidAphrophyllum coral colonies had a heterogeneous distribution through the reef. The framework of the main relief-bearing portion of the reef consists on average of 44.4% automicrite and automicrite-bound detritus, excluding automicrite-bound sponge body fossils, and at most 19.6% skeletal organisms in growth position (minimum of 7.2%). If sponge body fossils are included as automicrite framework, because they are preserved only as a result of automicrite formation, the percentage of automicrite and bound sediment is 54.9%. A smaller sampled reef consisting of the same basic facies had 39.5% automicrite and automicrite-bound sediment in its fremework (50.2% including sponges) and, at most, 33.4% skeletal organisms in growth position (minimum of 22.7%). The greater volume of skeletal framework in the small reef reflects a greater proportion of large corals. Of framebuilding skeletal organisms, automicrite-preserved lithistid and other sponges and cerioid rugose corals provided the greatest volume. However, crinoid holdfasts were the most widespread skeletal framework components. The dominant framework facies are sponge-automicrite boundstone, encrusted thrombolite, boundstone, mixed automicrite boundstone, and coral boundstone. The reefs are similar in overall framework construction and ecological succession to slightly older Visean reefs in eastern Australia and to some of the late Visean reefs of northern England. Surprisingly, framework similarities also exist between the reefs and certain thrombolite-lithistid-coral reefs of the European Jurassic.     

Platform margins, microbial/serpulids bioconstructions and slope-to-basin sediments in the Upper Triassic of the ‘Verbicaro Unit’ (Lucania and Calabria, southern Italy)

Summary  The Upper Triassic carbonates of the area comprised between Maratea (Lucania) and Praia a Mare (Calabria) have been studied. They have been grouped into six facies assemblages which, in turn, define two depositional systems.

Microbial boundstone dominated carbonate slope (Upper Carboniferous,N Spain): Microfacies,lithofacies distribution and stratal geometry

Summary The Carboniferous, particularly during the Serpukhovian and Bashkirian time, was a period of scarce shallow-water calcimicrobial-microbialite reef growth. Organic frameworks developed on high-rising platforms are, however, recorded in the Precaspian Basin subsurface, Kazakhstan, Russia, Japan and Spain and represent uncommon occurrences within the general trend of low accumulation rates and scarcity of shallow-water reefs. Sierra del Cuera (Cantabrian Mountains, N Spain) is a well-exposed high-rising carbonate platform of Late Carboniferous (Bashkirian-Moscovian) age with a microbial boundstone-dominated slope dipping from 20° up to 45°. Kilometer-scale continuous exposures allow the detailed documentation of slope geometry and lithofacies spatial distribution. This study aims to develop a depositional model of steep-margined Late Paleozoic platforms built by microbial carbonates and to contribute to the understanding of the controlling factors on lithofacies characteristics, stacking patterns, accumulation rates and evolution of the depositional architecture of systems, which differ from light-dependent coralgal platform margins. From the platform break to depths of nearly 300 m, the slope is dominated by massive cement-rich boundstone, which accumulated through the biologically induced precipitation of micrite. Boundstone facies (type A) with peloidal carbonate mud, fenestellid and fistuliporid bryozoans, sponge-like molds and primary cavities filled by radiaxial fibrous cement occurs all over the slope but dominates the deeper settings. Type B boundstone consists of globose centimeter-scale laminated accretionary structures, which commonly host botryoidal cement in growth cavities. The laminae nucleate around fenestellid bryozoans, sponges, Renalcis and Girvanella-like filaments. Type B boundstone typically occurs at depths between 20–150 m to locally more than 300 m and forms the bulk of the Bashkirian prograding slope. The uppermost slope boundstone (type C; between 0 and 20–100 m depth) includes peloidal micrite, radiaxial fibrous cement, bryozoans, sponge molds, Donezella, Renalcis, Girvanella, Ortonella, calcareous algae and calcitornellid foraminifers. From depths of 80–200 m to 450 m, 1–30 m thick lenses of crinoidal packstone, spiculitic wackestone, and bryozoan biocementstone with red-stained micrite matrix are episodically intercalated with boundstone and breccias. These layers increase in number from the uppermost Bashkirian to the Moscovian in parallel with the change from a rapidly prograding to an aggrading architecture. The red-stained strata share comparable features with Lower Carboniferous deeper-water mud-mound facies and were deposited during relative rises of sea level and pauses in boundstone production. Rapid relative sea-level rises might have been associated with changes in oceanographic conditions not favourable for thecalcimicrobial boundstone growth, such as upwelling of colder, nutrient-rich waters lifting the thermocline to depths of 80–200 m. Downslope of 150–300 m, boundstones interfinger with layers of matrix-free breccias, lenses of matrix-rich breccias, platform- and slope-derived grainstone and crinoidal packstone. Clast-supported breccias bound by radiaxial cement are produced by rock falls and avalanches coeval to boundstone growth. Matrix-rich breccias are debris flow deposits triggered by the accumulation of red-stained layers. Debris flows develop following the relative sea-level rises, which favour the deposition of micrite-rich lithofacies on the slope rather than being related to relative sea-level falls and subaerial exposures. The steep slope angles are the result of in situ growth and rapid stabilization by marine cement in the uppermost part, passing into a detrital talus, which rests at the angle of repose of noncohesive material. In the Moscovian, the aggradational architecture and steeper clinoforms are the result of increased accommodation space due to tectonic subsidence and due to a reduction of slope accumulation rates (from 240±45−605±35 m/My to 130±5 m/My). The increasing number of red-stained layers and the decrease of boundstone productivity are attributed to environmental changes in the adjacent basin, in particular during relative rises of sea level and to possible cooling due to icehouse conditions. The geometry of the depositional system appears to be controlled by boundstone growth rates. During the Bashkirian, the boundstone growth potential is at least 10 times greater than average values for ancient carbonate systems. The slope progradation rates (nearly 400–1000 m/My) are similar to the highest values deduced for the Holocene Bahamian prograding platform margin. The fundamental differences with modern systems are that progradation of the microbial-boundstone dominated steep slope is primarily controlled by boundstone growth rates rather than by highstand shedding from the platform top and that boundstone growth is largely independent from light and controlled by the physicochemical characteristics of seawater.     

Norian serpulid and microbial bioconstructions: Implication for the platform evolution in the Lombardy Basin (Southern Alps,Italy)

Summary The development of peculiar margin facies and abundant talus breccias within the Dolomia Principale inner platform is commonly observed in the Lombardy Basin during the Norian. The organisms building these margins are mainly serpulids, benthic microbes, subordinate porostomata and other encrusting forms; typical margin organisms, as sponges or corals, are extremely rare or absent. The build-ups form narrow rims along the borders of tectonic-controlled intraplatform basins. Regional back-stepping and progradation of the margin facies on the talus breccias produced by the erosion of the reef is commonly observed in the uppermost Dolomia Principale depositional system. Widespread occurrence of serpulids and microbial margins in middle-late Norian times is indicative of stressed environmental conditions—fluctuation of salinity and temperature on the inner platform and in the intraplatform basins—controlled by palaeogeographic setting. Physical characteristics allowed the bloom of forms able to develop in a wide range of environmental conditions, such as serpulids. In the Late Norian, major input of fine-grained clastics is recorded; close to the Norian-Rhaetian boundary, carbonate ramps were regionally restored. Locally, small serpulid and microbial bioconstructions still persist in the lowermost part of the shaly succession, even if they are less abundant with respect to the Dolomia Principale. Patch-reefs generally do not build a platform margin, but represent isolated mounds within shaly deposits. These build-ups occur on the edge of former structural highs; the communities survived the environmental change responsible for the siliciclastic input and locally managed to produce mounds during the deposition of the lower part of the upper depositional system (Riva di Solto Shale).     

Carbonate facies dominated by syndepositional cements: a key component of Middle Triassic platforms. The Marmolada case history (Dolomites, Italy)

Summary This article deals with the discussion of the role of the syndepositional cementation for the growth of the Middle Triassic pre-volcanic carbonate platforms of the Dolomites (Southern Alps, Northern Italy). The study is concentrated on the Marmolada Buildup, which escaped the facies destroying dolomitization which affected many surrounding platforms. The investigations took place within an almost isochronous uppermost Anisian palcogeographic transect, ranging from the platform-top to the margin and the upper slope. Methods used include geological mapping, sedimentological and paleontological studies, evaluation of the microfacies, as well as SEM and EDS epifluorescence analyses. The well bedded platform-top succession consists of intra-bioclast calcarenites and calcirudites, interbedded with subordinate boundstones, and organized in shallowing upward, meter scale depositional cycles, sometimes capped by subaerial surfaces. The platform margin belt is rich in boundstones and lacks a primary framework formed by organisms; metazoan skeletons form less then 5% of the rock volume. The outer margin and the uppermost slope are characterized by decimeter-scale boundstone blocks, coated and linked to each other by huge amounts of radiaxial fibrous calcite cements, arranged in concentric crusts. These cements (“evinospongiac”) represent the main component of the margin and upper slope facies. Epifluorescence analyses suggest the existence of abundant organic residual matter associated not only with the bioclasts and peloids, but also with the syndepositional cements. Organic matter likely played a significant role in carbonate cementation and was a key factor for the early lithification of the platform as well as for the sediment production. Minor element microanalyses reveal an uniform Mg content in different calcite types (2–4 Mole % MgCO₃), independently from the primary nature of the components. Late diagenetic sparry calcites exhibit similar Mg values but no iron. These data point to a homogenization of minor element distribution, probably associated with a slow but long-lasting semi-closed fluid circulation, possibly related with the Neogene uplifting of the Dolomite Mountains.     

New dasycladalean algae from the Middle Norian (Upper Triassic) of northern Italy (Mt. Pramaggiore, Carnic Prealps)

In the Eastern Southern Alps of northern Italy (Carnic Prealps, Friuli region), the shallow-water carbonate platform deposits of the Dolomia Principale Fm. (Norian–Rhaetian, Upper Triassic) show best-preserved platform to basin facies transition. The palaeontological study of an algal-rich level recovered from the platform margin facies (Mt. Pramaggiore) has displayed a very interesting association of Dasycladales. Two new genera (Bystrickyella and Elliottporella) and four new species (Bystrickyella ottii, Elliottporella morelloae, Palaeodasycladus lorigae and Holosporella conradii) have been described. These new data suggest that the Norian represents a period of turnover in the evolutionary history of the green algae community. This stage, placed between two extinctions, end-Ladinian and end-Norian, is here interpreted as a re-organization period of the evolutionary schemes of Dasycladales. The new lineages originated in the Norian developed further and characterized the Early Jurassic scenery. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A late Devonian (Frasnian) coral-bafflestone reef at Houshan in Guilin, South China

Summary Givetian to early Carboniferous sediments of South China are characterized by carbonates. Middle and Late Devonian strata are best developed in the Guilin area. Reefs and organic shoals are recorded by various lithofacies types indicating the existence of an extended carbonate platform and a change of the composition of reef communities in time. Starting in the late Devonian, stromatoporoids and corals were replaced by algae that subsequently played an important role together with stromatoporoids, receptaculitids and fasciculate rugose corals in reef communities. In Houshan, 5 km west of Guilin, a coral-bafflestone reef occurs in the Frasnian strata, situated near an offshore algal-stromatoporoid reef. The coral reef was formed in a back-reef area adjacent to the inner platform margin. The coral-bafflestone reef is unique among the late Devonian reefs of South China with regard to the biotic composition. The reef is composed of fasciculate colonies ofSmithiphyllum guilinense n. sp. embedded within in packstones and wackestones. The height of colonies reaches 1 m. The community is low-diverse. The species ofSmithiphyllum occurring in the Frasnian reef complexes of Guilin exhibit a distinct facies control:Smithiphyllum guilinense occurs in or near to margin facies and formed bafflestone, constituting a coral reef whereasSmithiphyllum occidentale Sorauf, 1972 andSmithiphyllum sp.—characterized by small colonies with thin corallites—are restricted to the back-reef and marginal slope facies. The bush-like coral colonies baffled sediments. Algae and stromatoporoids (mainlyStachyodes) are other reef biota. Reef-dwelling organisms are dominated by brachiopods. The reefs are composed from base to top of five lithofacies types: 1) cryptalgal micrite, 2) peloidal packstone, 3) stromatactis limestone, 4) coral-bafflestone, and 5) pseudopeloidal packstone. The reef complex can be subdivided into back-reef subfacies, reef flat and marginal subfacies, and marginal fore-slope subfacies. The Houshan coral-bafflestone reef is not a barrier reef but a coral patch reef located near the inner margin of a carbonate platform.     

Palaeoenvironmental significance of lacustrine stromatolites of the Arnstadt Formation (“Steinmergelkeuper”, Upper Triassic, N-Germany)

Lacustrine stromatolites of the Norian Arnstadt Formation (“Steinmergelkeuper”) occur on top of asymmetric flooding–evaporation cycles of a closed lake basin. They have been investigated with regard to associated lithofacies and biota, microfabric and stable carbon and oxygen isotopes. The stromatolites of the “Middle Grey Series” are brecciated and reworked by a flooding event of a subsequent lake cycle. They comprise agglutinated stromatolites rich in fish scales as well as skeletal stromatolites composed of a rhythmically grown dendroid micropeloidal framework. The latter are characterized by a shift towards positive δ¹³C values relative to the associated lake carbonates. This points to an effective photosynthesis in biofilm calcification at low concentrations in dissolved inorganic carbon (DIC) in a perennial fresh to brackish water lake. The stromatolites of the “Upper Red Series” occur on top of perennial lake cycles intercalated between playa lake deposits. The fine-grained stromatolites are poor in microfabric characteristics but show a significant covariation of δ¹⁸O and δ¹³C. This points to evaporation/degassing acting as driving mechanism in biofilm calcification. The lack of biotic effects on carbon isotope fractionation may reflect high concentrations in dissolved inorganic carbon. Skeletal oncoids, which occur as allochthonous components within an intraformational lag deposit of the “Upper Red Series”, are composed of cyanobacterial tubes and probably represent lowest saline lakes with only poor DIC buffering. Stable isotope signatures in conjunction with stromatolite microfabric analyses may be used as a proxy of DIC concentrations in ancient closed lakes.     

Drowning of a Lower Jurassic carbonate platform: Jbel Bou Dahar, High Atlas, Morocco

Summary The high-plateau of the Jbel Bou Dahar, situated in the Central and Eastern High Atlas of Morocco, represents a Lower Jurassic carbonate platform that drowned at the beginning of the Toarcian. Three phases of platform evolution can be distinguished: During thepre-drowning phase (upper Sinemurian— upper Pliensbachian) the platform interior facies reflects a restricted-marine lagoonal environment, protected by scattered buildups and cemented debris at the platform margin. Upper and mid-slope are dominated by coarse-grained, poorly sorted limestones, deposited through debris flows during sea-level lowstands. Sea-level highstand deposits occur at the toe of slope and are formed by an alternation of fine-grained litho- and bioclastic pack- to grainstones (turbidites), marls and mud- to wackestones (hemipelagic oozes). A condensed section, reflecting an abrupt and fundamental environmental change along the entire platform, characterises thedrowning phase (upper Pliensbachian— lower Toarcian). Within the platform interior densely packed biosparites represent the switch to high-energy environments, causing erosion of the former pre-drowning lagoonal sediments. These erosional products were redeposited on the platform slope, leading to the formation of coarse-grained non-skeletal sparites and micrites. Both platform interior and slope successions show a series of cyclic variations in sediment composition that could have been triggered by small-scale sea-level fluctuations. In contrast to the abrupt facies change at the pre-drowning —drowning boundary, the transition to thepost-drowning phase (lower Toarcian—Aalenian) is gradual. During this phase, biopelmicrites and pure micrites were deposited in all platform sections, followed by the deposition of calcistiltites. The facies point to quiet-water conditions below storm-wave base and display a uniform deep-marine sedimentation. This analysis shows that the drowning of the Jbel Bou Dahar carbonate platform was caused by abrupt and fundamental changes in the shallow-water realm. After exposure of the platform, these changes prevented the carbonate factory from re-establishing itself and made it impossible for the platform to keep up with the subsequent rise in sea level. These local changes were probably triggered by high-frequency sealevel variations in combination with regional or even worldwide changes in ocean circulation patterns.     

Lateral variability of shallow-water facies and high-frequency cycles in foreland basin carbonate platforms (Pennsylvanian,NW Spain)

The kilometer-sized and 100-meter-thick carbonate platforms of the Escalada Fm. I and II (Middle Pennsylvanian) accumulated in the foredeep of a marine foreland basin during the transgressive phases of 3rd-order sequences and were buried by prograding siliciclastic deltaic systems in the course of the subsequent highstand. The carbonate successions show a general upward trend from grain- to mud-supported carbonates, interfingering landwards with siliciclastic deposits of a mixed siliciclastic-carbonate shelf (Fito Fm.) adjacent to deltaic systems. The spatial variability of the carbonate facies and the high-frequency (4th–5th order) cycles, from the platform margin-outer platform to the deltaic systems, has been interpreted from basin reconstruction. Carbonate facies include skeletal grainstone to packstone, ooidal grainstone, burrowed skeletal wackestone, microbial and algal boundstone to wackestone forming mounds, various algal bafflestone and coral biostromes in areas with siliciclastic input. These high-frequency transgressive–regressive cycles are interpreted to record allocyclic forcing of high-amplitude glacioeustasy because they show characteristic features of icehouse cycles: thickness >5 m, absence of peritidal facies, and in some cases, subaerial exposure surfaces capping the cycles. In the mixed cycles, siliciclastics are interpreted as late highstand to lowstand regressive deposits, whereas carbonates as transgressive-early highstand deposition. The lateral and vertical variability of the facies in the glacioeustatic cycles was a response to deposition in a rapidly subsiding, active foreland basin subjected to siliciclastic input, conditions that might be detrimental to the growth of high-relief carbonate systems.     

The role of microbes in reef-building communities of the Cannindah limestone (Mississippian), Monto region, Queensland, Australia

Reefs in the Cannindah Limestone at Old Cannindah Homestead, Monto region, Queensland, are exceptional in Eastern Australian Mississippian (Carboniferous) build-ups because of their largest dimension and differentiated microbial fabrics. Calcimicrobes and microbial carbonates, which represent a marine reefal environment occupied by both corals and sponges, are particularly abundant in the reef framework fabrics compared to other Mississippian build-ups in the world. They contributed significantly to the rigidity of the reefs on a crinoidal bank setting. Metazoans and calcimicrobes coexisted and played different roles in reef construction. Reef-building and cavity-dwelling microbes include Renalcis, Palaeomicrocodium, Girvanella, problematic Aphralysia, Ortonella, Shamovella-like, Rothpletzella-like, Wetheredella-like, and some problematic calcimicrobes, which occur in inter-corallite infillings of fasciculate rugose corals, in thrombolitic textures, in or within deposits between microdigitate stromatolite and laminated microbialites, and in reef cavities. Some reef intervals are entirely formed by Renalcis, Palaeomicrocodium, problematic calcimicrobes, and cement. Girvanella, as an encrusting calcimicrobe, generally bound bioclasts and micrite, or together with cement, formed boundstone. Microbial carbonates, including thrombolites, microencrusters, microdigitate stromatolite, laminated and tabular microbialite, irregular layers of self-encrusting vesicles, and microbial micrite, occur commonly in reef framestone and boundstone. The role of microbes and relevant microbial carbonates in the Cannindah reef limestone highlighted a significant account of microbial facies complexes associated with the Mississippian reefs.     

Mud mounds: A polygenetic spectrum of fine-grained carbonate buildups

Summary This research report contains nine case studies (part II to X) dealing with Palaeozoic and Mesozoic mud mounds, microbial reefs, and modern zones of active micrite production, and two parts (I and XI) summarizing the major questions and results. The formation of different types ofin situ formed micrites (automicrites) in close association with siliceous sponges is documented in Devonian, Carboniferous, Triassic, Jurassic and Cretaceous mounds and suggests a common origin with a modern facies found within reef caves. Processes involved in the formation of autochthonous micrites comprise: (i) calcifying mucus enriched in Asp and Glu, this type presumably is linked to the formation of stromatolites, thrombolites and massive fabrics; (ii) protein-rich substances within confined spaces (e.g. microcavities) result in peloidal pockets, peloidal coatings and peloidal stromatolites, and (iii) decay of sponge soft tissues, presumably enriched with symbiotic bacteria, lead to the micropeloidal preservation of parts of former sponge bodies. As a consequence, there is strong evidence that the primary production of micrite in place represents the initial cause for buildup development. The mode of precipitation corresponds to biologically-induced, matrix-mediated mineralization which results in high-Mg-calcites, isotopically balanced with inorganic cements or equilibrium skeletal carbonates, respectively. If distinct automicritic fabrics are absent, the source or origin of micrite remains questionable. However, the co-occurring identifiable components are inadequate, by quantity and physiology, to explain the enhanced accumulation of fine-grained calcium carbonate. The stromatolite reefs from the Permian Zechstein Basin are regarded as reminiscent of ancestral (Precambrian) reef facies, considered the precursor of automicrite/sponge buildups. Automicrite/sponge buildups represent the basic Phanerozoic reef type. Analogous facies are still present within modern cryptic reef habitats, where the biocalcifying carbonate factory is restricted in space.     

Platform-basin transect of a middle to late Jurassic large-scale carbonate platform system (Shotori mountains,Tabas area,east-central Iran)

Summary Following a phase of predominantly siliciclastic sedimentation in the Early and Middle Jurassic, a large-scale, low-latitude carbonate depositional system was established in the northern part of the Tabas Block, part of the central-east Iranian microplate, during the Callovian and persisted until the latest Oxfordian/Early Kimmeridgian. Running parallel to the present eastern block margin, a NNW/SSE-trending carbonate platform developed in an area characterized by reduced subsidence rates (Shotori Swell). The growth of this rimmed, flat-topped barrier platform strongly influenced the Upper Jurassic facies pattern and sedimentary history of the Tabas Block. The platform sediments, represented by the predominantly fine-grained carbonates of the Esfandiar Limestone Formation, pass eastward into slope to basin sediments of the Qal'eh Dokhtar Limestone Formation (platform-derived allochthonites, microbialites, and peri-platform muds). Towards the west, they interfinger with bedded limestones and marlstones (Kamar-e-Mehdi Formation), which were deposited in an extensive shelf lagoon. In a N−S direction, the Esfandiar Platform can be traced for about 170 km, in an E-W direction, the platform extended for at least 35–40 km. The width of the eastern slope of the platform is estimated at 10–15 km, the width of the western shelf lagoon varied considerably (>20–80 km). During the Late Callovian to Middle Oxfordian, the Esfandiar Platform flourished under arid climatic conditions and supplied the slope and basinal areas with large amounts of carbonates (suspended peri-platform muds and gravitational sediments). Export pulses of platform material, e.g. ooids and aggregate grains, into the slope and basinal system are interpreted as highstand shedding related to relative sealevel variations. The high-productivity phase was terminated in the Late Oxfordian when the eastern platform areas drowned and homogeneous deep water marls of the Upper Oxfordian to Kimmeridgian Korond Formation onlapped both the Qal'eh Dokhtar Limestone Formation and the drowned Esfandiar Limestone Formation. Tectonic instability, probably caused by faulting at the margins of the Tabas Block in connection with rotational movements of the east-central Iranian block assemblage, was responsible for the partial drowning of the eastern platform areas. In some areas, relicts of the platform persisted to produce shallow-water sediments into the Kimmeridgian.     

Signatures of hydrocarbon venting in a Middle Devonian Carbonate Mound (Hollard Mound) at the Hamar Laghdad (Antiatlas, Morocco)

Summary The Middle Devonian Hollard Mud Mound is situated in the eastern Hamar Laghdad, which is a small mountain range in the Tafilalt in SE Morocco. In contrast to the well known Lower Devonian Kess-Kess mounds, the Hollard Mound is of Middle Devonian age. The facies in the core of this mud mound differs from that of the other parts of the mound, and exhibits signatures of ancient hydrocarbon venting. The carbonate phases of the core facies are derived from the oxidation of vent fluids and consist of clotted micrite, a cryptocrystalline carbonate associated with spheres of uncertain origin, and a calcitic rim cement (rim cement B). These vent carbonates show δ¹³C values in the range of −11 to −20% PDB indicating that some of their carbon is derived from isotopically light hydrocarbons. Fossiliferous micrite has been affected by hydrocarbon venting in the proximity of the vent site, which is indicated by intermediate δ¹³C values between vent carbonates and not affected sediments. Bivalves occur in dense populations within the core facies. They form autochthonous shell accumulations and are almost exclusively articulated. it is likely that these bivalves were dependent on chemosynthesis similar to their counterparts at modern vents. The vent deposits also exhibit an unusual prasinophyte assemblage, which might have been linked to the specific nutrient availability at the vent site. The ancient vent site is characterized by an enhanced carbonate precipitation and rapid lithification. The latter is corroborated by the three-dimensional preservation of phytoplankton (prasinophytes and acritarchs) and the occurrence of stromatactoid pores. An early phase of carbonate corrosion predating the formation of vent carbonates affected the fossiliferous micrite of the core facies and is thought to be related to a phase of H₂S-rich venting.     

An example for black shale development on a carbonate platform (late Triassic, Seefeld, Austria)

Summary East of Seefeld/Tyrol the Hauptdolomit facies (Triassic, Norian) is accompanied by an organic-rich intercalation, the Seefeld facies. Three facies were distinguished, which developed within a separate basin within the Hauptdolomit carbonate platform. These facies have been investigated in an environmental and palaeoecological context applying microfacies analysis, palynology, organic petrology, organic geochemistry and stable isotope geochemistry. As the controlling factors of sedimentation, sea level changes are suggested for large scale fluctuations, and climatic changes for variations on a smaller scale. Within the basin facies a μm-scaled rhythm can be observed, which was obviously seasonally controlled. Amajor amount of organic material of the deposit has been produced by microbial activity under anoxic conditions. Causes for the absence of pollen and spores in many black shale deposits are discussed.     

Upper Triassic reefs of the Oman Mountains: Data from the South Tethyan margin

Summary The Upper Triassic reefal limestones of the Oman Mountains were investigated with respect to their microfacies, palaeontology and community structure. The reef fauna described and figured for the first time occurs in parautochthonous slope deposits of the Arabian platform (Sumeini Group) and in allochthonous reefal blocks (‘Oman Exotics’, Hawasina Complex). The ‘Oman Exotics’ are tectonically dislocated blocks, derived from isolated carbonate platforms on seamounts in the Hawasina basin or in the South Tethys Sea. The lithofacies and fauna of these blocks comprise a cyclic platform facies with megalodonts, reef and reef debris facies. The reefal limestones are dated as Norian/Rhaetian by benthic foraminiferal associations (Costifera, Siculocosta, Galeanella) and typical encrusting organisms (Alpinophragmium, Microtubus). Some small ‘Oman Exotics’ are of Carnian age. The shallow-marine organisms include scleractinian corals of different growth forms, ‘sphinctozoans’, ‘inozoans’ chaetetids, spongiomorphids, disjectoporids and solenoporacean algae as the main reef builders, various encrusters like microbes, foraminifers, sponges and many different problematical organisms for the stabilisation of the reef framework and a group of dwellers including benthic foraminifers, gastropods, bivalves and a few dasycladacean algae. The reef communities are characterized by the coverage of organisms and distributional pattern. Analogies with the coeval reef deposits from the European part of the Tethys have been recognized. Some species, now collected in Oman, were also reported from American and Asian localities.     

Biogeochemical cycling and microbial diversity in the thrombolitic microbialites of Highborne Cay,Bahamas

Thrombolites are unlaminated carbonate build‐ups that are formed via the metabolic activities of complex microbial mat communities. The thrombolitic mats of Highborne Cay, Bahamas develop in close proximity (1–2 m) to accreting laminated stromatolites, providing an ideal opportunity for biogeochemical and molecular comparisons of these two distinctive microbialite ecosystems. In this study, we provide the first comprehensive characterization of the biogeochemical activities and microbial diversity of the Highborne Cay thrombolitic mats. Morphological and molecular analyses reveal two dominant mat types associated with the thrombolite deposits, both of which are dominated by bacteria from the taxa Cyanobacteria and Alphaproteobacteria. Diel cycling of dissolved oxygen (DO) and dissolved inorganic carbon (DIC) were measured in all thrombolitic mat types. DO production varied between thrombolitic types and one morphotype, referred to in this study as ‘button mats’, produced the highest levels among all mat types, including the adjacent stromatolites. Characterization of thrombolite bacterial communities revealed a high bacterial diversity, roughly equivalent to that of the nearby stromatolites, and a low eukaryotic diversity. Extensive phylogenetic overlap between thrombolitic and stromatolitic microbial communities was observed, although thrombolite‐specific cyanobacterial populations were detected. In particular, the button mats were dominated by a calcified, filamentous cyanobacterium identified via morphology and 16S rRNA gene sequencing as Dichothrix sp. The distinctive microbial communities and chemical cycling patterns within the thrombolitic mats provide novel insight into the biogeochemical processes related to the lithifying mats in this system, and provide data relevant to understanding microbially induced carbonate biomineralization.     

Calcimicrobial cap rocks from the basal Triassic units: western Taurus occurrences (SW Turkey)

A post-extinction calcimicrobial cap rock occurs above the giant Permian skeletal carbonate platform exposed in the western Taurus Mountains (southern Turkey). It was formed during the main step of a very rapid and large-scale platform flooding (Earliest Triassic) and has been found also in other Tethyan localities. This calcimicrobial cap rock, 20 to 40 m thick, consists of thrombolitic and stromatolitic build-ups at the base and most oolitic grainstone in the upper part. It was terminated by a sudden input of fine terrigenous sediments. The domal, columnar and conical stromatolites are ‘anachronistic’ deposits as are the abundant botryoidal and fanning aragonite crystal pseudomorphs. This again shows the uniqueness of the Earliest Triassic period and indicates a delayed biotic recovery. To cite this article: A. Baud et al., C. R. Palevol 4 (2005).