Enzymatic hydrolysis of p-nitroacetanilide: mechanistic studies of the aryl acylamidase from Pseudomonas fluorescens.

Aryl acylamidase (EC 3.1.5.13; AAA) catalyzes the hydrolysis of p-nitroacetanilide (PNAA) via the standard three-step mechanism of serine hydrolases: binding of substrate (K(s)), acylation of active-site serine (k(acyl)), and hydrolytic deacylation (k(deacyl)). Key mechanistic findings that emerged from this study include that (1) AAA requires a deprotonated base with a pK(a) of 8.3 for expression of full activity toward PNAA. Limiting values of kinetic parameters at high pH are k(c) = 7 s(-1), K(m) = 20 microM, and k(c)/K(m) = 340 000 M(-1) s(-1). (2) At pH 10, where all the isotope effects were conducted, k(c) is equally rate-limited by k(acyl) and k(deacyl). (3) The following isotope effects were determined: (D)()2(O)(k(c)/K(m)) = 1.7 +/- 0.2, (D)()2(O)k(c) = 3.5 +/- 0.3, and (beta)(D)(k(c)/K(m)) = 0.83 +/- 0.04, (beta)(D)k(c) = 0.96 +/- 0.01. These values, together with proton inventories for k(c)/K(m) and k(c), suggest the following mechanism: (i) The initial binding of substrate to enzyme to form the Michaelis complex is accompanied by solvation changes that generate solvent deuterium isotope effects originating from hydrogen ion fractionation at multiple sites on the enzyme surface. (ii) From within the Michaelis complex, the active site serine attacks the carbonyl carbon of PNAA with general-base catalysis to form a substantially tetrahedral transition state enroute to the acyl-enzyme. (iii) Finally, deacylation occurs through a process involving a rate-limiting solvent isotope effect, generating conformational change of the acyl-enzyme that positions the carbonyl bond in a polarizing environment that is optimal for attack by water.     

Chemical mechanism of a cysteine protease, cathepsin C, as revealed by integration of both steady-state and pre-steady-state solvent kinetic isotope effects

Cathepsin C, or dipeptidyl peptidase I, is a lysosomal cysteine protease of the papain family that catalyzes the sequential removal of dipeptides from the free N-termini of proteins and peptides. Using the dipeptide substrate Ser-Tyr-AMC, cathepsin C was characterized in both steady-state and pre-steady-state kinetic modes. The pH(D) rate profiles for both log k cat/ K m and log k cat conformed to bell-shaped curves for which an inverse solvent kinetic isotope effect (sKIE) of 0.71 +/- 0.14 for (D)( k cat/ K a) and a normal sKIE of 2.76 +/- 0.03 for (D) k cat were obtained. Pre-steady-state kinetics exhibited a single-exponential burst of AMC formation in which the maximal acylation rate ( k ac = 397 +/- 5 s (-1)) was found to be nearly 30-fold greater than the rate-limiting deacylation rate ( k dac = 13.95 +/- 0.013 s (-1)) and turnover number ( k cat = 13.92 +/- 0.001 s (-1)). Analysis of pre-steady-state burst kinetics in D 2O allowed abstraction of a normal sKIE for the acylation half-reaction that was not observed in steady-state kinetics. Since normal sKIEs were obtained for all measurable acylation steps in the presteady state [ (D) k ac = 1.31 +/- 0.04, and the transient kinetic isotope effect at time zero (tKIE (0)) = 2.3 +/- 0.2], the kinetic step(s) contributing to the inverse sKIE of (D)( k cat/ K a) must occur more rapidly than the experimental time frame of the transient kinetics. Results are consistent with a chemical mechanism in which acylation occurs via a two-step process: the thiolate form of Cys-234, which is enriched in D 2O and gives rise to the inverse value of (D)( k cat/ K a), attacks the substrate to form a tetrahedral intermediate that proceeds to form an acyl-enzyme intermediate during a proton transfer step expressing a normal sKIE. The subsequent deacylation half-reaction is rate-limiting, with proton transfers exhibiting normal sKIEs. Through derivation of 12 equations describing all kinetic parameters and sKIEs for the proposed cathepsin C mechanism, integration of both steady-state and pre-steady-state kinetics with sKIEs allowed the provision of at least one self-consistent set of values for all 13 rate constants in this cysteine protease's chemical mechanism. Simulation of the resulting kinetic profile showed that at steady state approximately 80% of the enzyme exists in an active-site cysteine-acylated form in the mechanistic pathway. The chemical and kinetic details deduced from this work provide a potential roadmap to help steer drug discovery efforts for this and other disease-relevant cysteine proteases.     

Biochemical analysis of the substrate specificity of the beta-ketoacyl-acyl carrier protein synthase domain of module 2 of the erythromycin polyketide synthase

The beta-ketoacyl-acyl carrier protein synthase (KS) domain of the modular 6-deoxyerythronolide B synthase (DEBS) catalyzes the fundamental chain building reaction of polyketide biosynthesis. The KS-catalyzed reaction involves two discrete steps consisting of formation of an acyl-enzyme intermediate generated from the incoming acylthioester substrate and an active site cysteine residue, and the conversion of this intermediate to the beta-ketoacyl-acyl carrier protein product by a decarboxylative condensation with a paired methylmalonyl-SACP. We have determined the rate constants for the individual biochemical steps by a combination of protein acylation and transthioesterification experiments. The first-order rate constant (k(2)) for formation of the acyl-enzyme intermediate from [1-(14)C]-(2S,3R)-2-methyl-3-hydroxypentanoyl-SNAC (2) and recombinant DEBS module 2 is 5.8 +/- 2.6 min(-)(1), with a dissociation constant (K(S)) of 3.5 +/- 2.8 mM. The acyl-enzyme adduct was formed at a near-stoichiometric ratio of approximately 0.8:1. Transthioesterification between unlabeled diketide-SNAC 2 and N-[1-(14)C-acetyl]cysteamine gave a k(exch) of 0.15 +/- 0.06 min(-)(1), with a K(m) for HSNAC of 5.7 +/- 4.9 mM and a K(m) for 2 of 5.3 +/- 0.9 mM. Under the conditions that were used, k(exch) was equal to k(-)(2), the first-order rate constant for reversal of the acyl-enzyme-forming reaction. Since the rate of the decarboxylative condensation is much greater that the rate of reversion to the starting material (k(3) > k(-)(2)), formation of the acyl-enzyme adduct is effectively irreversible, thereby establishing that the observed value of the specificity constant (k(cat)/K(m)) is solely a reflection of the intrinsic substrate specificity of the KS-catalyzed acyl-enzyme-forming reaction. These findings were also extended to a panel of diketide- and triketide-SNAC analogues, revealing that some substrate analogues that are not converted to product by DEBS module 2 form dead-end acyl-enzyme intermediates.     

Staphylococcus aureus sortase transpeptidase SrtA: insight into the kinetic mechanism and evidence for a reverse protonation catalytic mechanism

The Staphylococcus aureus transpeptidase SrtA catalyzes the covalent attachment of LPXTG-containing virulence and colonization-associated proteins to cell-wall peptidoglycan in Gram-positive bacteria. Recent structural characterizations of staphylococcal SrtA, and related transpeptidases SrtB from S. aureus and Bacillus anthracis, provide many details regarding the active site environment, yet raise questions with regard to the nature of catalysis and active site cysteine thiol activation. Here we re-evaluate the kinetic mechanism of SrtA and shed light on aspects of its catalytic mechanism. Using steady-state, pre-steady-state, bisubstrate kinetic studies, and high-resolution electrospray mass spectrometry, revised steady-state kinetic parameters and a ping-pong hydrolytic shunt kinetic mechanism were determined for recombinant SrtA. The pH dependencies of kinetic parameters k(cat)/K(m) and k(cat) for the substrate Abz-LPETG-Dap(Dnp)-NH(2) were bell-shaped with pK(a) values of 6.3 +/- 0.2 and 9.4 +/- 0.2 for k(cat) and 6.2 +/- 0.2 and 9.4 +/- 0.2 for k(cat)/K(m). Solvent isotope effect (SIE) measurements revealed inverse behavior, with a (D)2(O)k(cat) of 0.89 +/- 0.01 and a (D)2(O)(k(cat)/K(m)) of 0.57 +/- 0.03 reflecting an equilibrium SIE. In addition, SIE measurements strongly implicated Cys184 participation in the isotope-sensitive rate-determining chemical step when considered in conjunction with an inverse linear proton inventory for k(cat). Last, the pH dependence of SrtA inactivation by iodoacetamide revealed a single ionization for inactivation. These studies collectively provide compelling evidence for a reverse protonation mechanism where a small fraction (ca. 0.06%) of SrtA is competent for catalysis at physiological pH, yet is highly active with an estimated k(cat)/K(m) of >10(5) M(-)(1) s(-)(1).     

Mechanistic studies with 2-C-methyl-D-erythritol 4-phosphate synthase from Escherichia coli

The mechanism of the reaction catalyzed by 2-C-methyl-d-erythritol 4-phosphate (MEP) synthase from Escherichia coli has been studied by steady-state and single-turnover kinetic experiments for the 1-deoxy-d-xylulose 5-phosphoric acid (DXP) analogues, 1,1,1-trifluoro-1-deoxy-d-xylulose 5-phosphoric acid (CF(3)-DXP), 1,1-difluoro-1-deoxy-d-xylulose 5-phosphoric acid (CF(2)-DXP), 1-fluoro-1-deoxy-d-xylulose 5-phosphoric acid (CF-DXP), and 1,2-dideoxy-d-hexulose 6-phosphate (Et-DXP). CF(3)-DXP, CF(2)-DXP, and Et-DXP were poor inhibitors, most likely because of the increase in steric bulk at C1 of DXP. The three analogues were also poor substrates for the enzyme. In contrast, CF-DXP was a good substrate (k(cat)(CF)(-)(DXP) = 37 +/- 2 s(-)(1), K(m)(CF)(-)(DXP) = 227 +/- 25 microM) for MEP synthase when compared to DXP (k(cat)(DXP) = 29 +/- 1 s(-)(1), K(m)(DXP) = 45 +/- 4 microM). A primary deuterium isotope effect was observed under single-turnover conditions when CF-DXP was incubated with 4S-[(2)H]NADPH ((H)k/(D)k = 1.34 +/-0.01), whereas no isotope effect was observed upon incubation with DXP and 4S-[(2)H]NADPH ((H)k/(D)k = 1.02 +/- 0.02). The reaction did not exhibit burst kinetics for either substrate, indicating that product release is not rate-limiting. These studies suggest that positive charge does not develop at C2 of DXP during catalysis. In addition, the isotope effect with CF-DXP and 4S-[(2)H]NADPH but not DXP indicates that the rearrangement step, which precedes hydride transfer, is rate-limiting for DXP but becomes partially rate-limiting for CF-DXP. Thus, rearrangement appears to be enhanced by substitution of a hydrogen atom in the methyl group of DXP by fluorine. These observations are consistent with a retro-aldol/aldol mechanism for the rearrangement during conversion of DXP to MEP.     

Solvent deuterium isotope effect on the oxidation of o-diphenols by tyrosinase

A solvent deuterium isotope effect on the catalytic affinity (K(m)) and rate constant (k(cat)) of tyrosinase in its action on 4-tert-butylcatechol (TBC) was observed. Both parameters decreased as the molar fraction of deuterated water in the medium increased, while the k(cat)/K(m) ratio remained constant. In a proton inventory study, the representation of k(cat)(f(n))/k(cat)(f(0)) and K(m)(f(n))/K(m)(f(0)) vs. n (atom fractions of deuterium) was linear, indicating that, of the four protons transferred from the two molecules of substrate and which are oxidized in one turnover, only one is responsible for the isotope effects. The fractionation factor of 0.64+/-0.02 contributed to identifying the possible proton acceptor. Possible mechanistic implications are discussed.     

Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Mechanistic origins of the substrate selectivity of serine proteases

Serine proteases catalyze the hydrolysis of amide bonds of their protein and peptide substrates through a mechanism involving the intermediacy of an acyl-enzyme. While the rate constant for formation of this intermediate, k(2), shows a dramatic dependence on peptide chain length, the rate constant for the intermediate's hydrolysis is relatively insensitive to chain length. To probe the mechanistic origins of this phenomenon, we determined temperature dependencies and solvent isotope effects for the alpha-chymotrypsin-catalyzed hydrolysis of Suc-Phe-pNA (K(s) = 1 mM, k(2) = 0.04 s(-)(1), and k(3) = 11 s(-)(1)), Suc-Ala-Phe-pNA (K(s) = 4 mM, k(2) = 0.9 s(-)(1), and k(3) = 42 s(-)(1)), and Suc-Ala-Ala-Pro-Phe-pNA (K(s) = 0.1 mM, k(2) = 98 s(-)(1), and k(3) = 71 s(-)(1)). We found that while the van't Hoff plots for K(s) and the Eyring plots for k(3) are linear for all three reactions, the Eyring plots for k(2) are convex, indicating that the process governed by k(2) is complex, possibly involving a coupling between active site chemistry and protein conformational isomerization. This interpretation is strengthened by solvent isotope effects on k(2) that are largely temperature-independent. Furthermore, the dependence of k(2) on peptide length is manifested entirely in the enthalpy of activation, suggesting a mechanism of catalysis by distortion. Taken together, this analysis of acylation suggests that extended substrates which can engage in subsite interactions are able to efficiently trigger the coupling mechanism between chemistry and a conformational isomerization that distorts the substrate and thereby promotes nucleophilic attack.     

Cloning and characterization of histamine dehydrogenase from Nocardioides simplex

Histamine dehydrogenase (NSHADH) can be isolated from cultures of Nocardioides simplex grown with histamine as the sole nitrogen source. A previous report suggested that NSHADH might contain the quinone cofactor tryptophan tryptophyl quinone (TTQ). Here, the hdh gene encoding NSHADH is cloned from the genomic DNA of N. simplex, and the isolated enzyme is subjected to a full spectroscopic characterization. Protein sequence alignment shows NSHADH to be related to trimethylamine dehydrogenase (TMADH: EC 1.5.99.7), where the latter contains a bacterial ferredoxin-type [4Fe-4S] cluster and 6-S-cysteinyl FMN cofactor. NSHADH has no sequence similarity to any TTQ containing amine dehydrogenases. NSHADH contains 3.6+/-0.3 mol Fe and 3.7+/-0.2 mol acid labile S per subunit. A comparison of the UV/vis spectra of NSHADH and TMADH shows significant similarity. The EPR spectrum of histamine reduced NSHADH also supports the presence of the flavin and [4Fe-4S] cofactors. Importantly, we show that NSHADH has a narrow substrate specificity, oxidizing only histamine (K(m)=31+/-11 microM, k(cat)/K(m)=2.1 (+/-0.4)x10(5)M(-1)s(-1)), agmatine (K(m)=37+/-6 microM, k(cat)/K(m)=6.0 (+/-0.6)x10(4)M(-1)s(-1)), and putrescine (K(m)=1280+/-240 microM, k(cat)/K(m)=1500+/-200 M(-1)s(-1)). A kinetic characterization of the oxidative deamination of histamine by NSHADH is presented that includes the pH dependence of k(cat)/K(m) (histamine) and the measurement of a substrate deuterium isotope effect, (D)(k(cat)/K(m) (histamine))=7.0+/-1.8 at pH 8.5. k(cat) is also pH dependent and has a reduced substrate deuterium isotope of (D)(k(cat))=1.3+/-0.2.     

Solvent isotope effects on alpha-glucosidase

The solvent kinetic isotope effects (SKIE) on the yeast alpha-glucosidase-catalyzed hydrolysis of p-nitrophenyl and methyl-d-glucopyranoside were measured at 25 degrees C. With p-nitrophenyl-D-glucopyranoside (pNPG), the dependence of k(cat)/K(m) on pH (pD) revealed an unusually large (for glycohydrolases) solvent isotope effect on the pL-independent second-order rate constant, (DOD)(k(cat)/K(m)), of 1.9 (+/-0.3). The two pK(a)s characterizing the pH profile were increased in D(2)O. The shift in pK(a2) of 0.6 units is typical of acids of comparable acidity (pK(a)=6.5), but the increase in pK(a1) (=5.7) of 0.1 unit in going from H(2)O to D(2)O is unusually small. The initial velocities show substrate inhibition (K(is)/K(m) approximately 200) with a small solvent isotope effect on the inhibition constant [(DOD)K(is)=1.1 (+/-0.2)]. The solvent equilibrium isotope effects on the K(is) for the competitive inhibitors D-glucose and alpha-methyl D-glucoside are somewhat higher [(DOD)K(i)=1.5 (+/-0.1)]. Methyl glucoside is much less reactive than pNPG, with k(cat) 230 times lower and k(cat)/K(m) 5 x 10(4) times lower. The solvent isotope effect on k(cat) for this substrate [=1.11 (+/-0. 02)] is lower than that for pNPG [=1.67 (+/-0.07)], consistent with more extensive proton transfer in the transition state for the deglucosylation step than for the glucosylation step.     

Ground-state destabilization in orotate phosphoribosyltransferases by binding isotope effects

Orotate phosphoribosyltransferases (OPRTs) form and break the N-ribosidic bond to pyrimidines by way of ribocation-like transition states (TSs) and therefore exhibit large α-secondary 1'-(3)H k(cat)/K(m) kinetic isotope effects (KIEs) [Zhang, Y., and Schramm, V. L. (2010) J. Am. Chem. Soc. 132, 8787-8794]. Substrate binding isotope effects (BIEs) with OPRTs report on the degree of ground-state destabilization for these complexes and permit resolution of binding and transition-state effects from the k(cat)/K(m) KIEs. The BIEs for interactions of [1'-(3)H]orotidine 5'-monophosphate (OMP) with the catalytic sites of Plasmodium falciparum and human OPRTs are 1.104 and 1.108, respectively. These large BIEs establish altered sp(3) bond hybridization of C1' toward the sp(2) geometry of the transition states upon OMP binding. Thus, the complexes of these OPRTs distort OMP part of the way toward the transition state. As the [1'-(3)H]OMP k(cat)/K(m) KIEs are approximately 1.20, half of the intrinsic k(cat)/K(m) KIEs originate from BIEs. Orotidine, a slow substrate for these enzymes, binds to the catalytic site with no significant [1'-(3)H]orotidine BIEs. Thus, OPRTs are unable to initiate ground-state destabilization of orotidine by altered C1' hybridization because of the missing 5'-phosphate. However the k(cat)/K(m) KIEs for [1'-(3)H]orotidine are also approximately 1.20. The C1' distortion for OMP happens in two steps, half upon binding and half on going from the Michaelis complex to the TS. With orotidine as the substrate, there is no ground-state destabilization in the Michaelis complexes, but the C1' distortion at the TS is equal to that of OMP. The large single barrier for TS formation with orotidine slows the rate of barrier crossing.     

Amphipathic property of free thiol group contributes to an increase in the catalytic efficiency of carboxypeptidase Y.

Cys341 of carboxypeptidase Y, which constitutes one side of the solvent-accessible surface of the S1 binding pocket, was replaced with Gly, Ser, Asp, Val, Phe or His by site-directed mutagenesis. Kinetic analysis, using Cbz-dipeptide substrates, revealed that polar amino acids at the 341 position increased K(m) whereas hydrophobic amino acids in this position tended to decrease K(m). This suggests the involvement of Cys341 in the formation of the Michaelis complex in which Cys341 favors the formation of hydrophobic interactions with the P1 side chain of the substrate as well as with residues comprising the surface of the S1 binding pocket. Furthermore, C341G and C341S mutants had significantly higher k(cat) values with substrates containing the hydrophobic P1 side chain than C341V or C341F. This indicates that the nonhydrophobic property conferred by Gly or Ser gives flexibility or instability to the S1 pocket, which contributes to the increased k(cat) values of C341G or C341S. The results suggest that Cys341 may interact with His397 during catalysis. Therefore, we propose a dual role for Cys341: (a) its hydrophobicity allows it to participate in the formation of the Michaelis complex with hydrophobic substrates, where it maintains an unfavorable steric constraint in the S1 subsite; (b) its interaction with the imidazole ring of His397 contributes to the rate enhancement by stabilizing the tetrahedral intermediate in the transition state.     

Mechanistic studies on thiamin phosphate synthase: evidence for a dissociative mechanism

Thiamin phosphate synthase catalyzes the coupling of 4-methyl-5-(beta-hydroxyethyl)thiazole phosphate (Thz-P) and 4-amino-5-(hydroxymethyl)-2-methylpyrimidine pyrophosphate (HMP-PP) to give thiamin phosphate. In this paper, we demonstrate that 4-amino-5-(hydroxymethyl)-2-(trifluoromethyl)pyrimidine pyrophosphate (CF(3)-HMP-PP) is a very poor substrate [k(cat)(CH(3)) > 7800k(cat)(CF(3))] and that 4-amino-5-(hydroxymethyl)-2-methoxypyrimidine pyrophosphate (CH(3)O-HMP-PP) is a good substrate [k(cat)(OCH(3)) > 2.8k(cat)(CH(3))] for the enzyme. We also demonstrate that the enzyme catalyzes positional isotope exchange. These observations are consistent with a dissociative mechanism (S(N)1 like) for thiamin phosphate synthase in which the pyrimidine pyrophosphate dissociates to give a reactive pyrimidine intermediate which is then trapped by the thiazole moiety.     

On true and apparent Michaelis constants in enzymology. II. Is the equation k(m)app = k(s) + k)cat)/k(1) true for enzyme-catalysed reactions with activator participation?

The article is dedicated to analysis of equation which expresses apparent Michaelis constant K(m)app) of enzyme-catalysed reactions with activator participation by means of the substrate constant K(s) and rate constant of enzyme-substrate complex decomposition k(cat). It has been shown that although it is possible to record the mechanisms of such reactions as a scheme similar to Michaelis-Menten model and to derive equation of apparent Michaelis constant as K(m(app) = K(s) + k(cat)/k(1), but this approach cannot be used for investigation of all reactions with activator participation. The equation mentioned above is not obeyed in the general case, it may be true for some mechanisms only or under certain ratio of kinetic parameters of enzyme-catalysed reactions.     

Kinetics of action of chymosin (rennin) on some peptide bonds of bovine beta-casein

The first steps of proteolysis of bovine beta-casein by chymosin were studied quantitatively by using reverse-phase high-performance liquid chromatography (RP-HPLC). Although chymosin has a broad specificity, it has been possible to selectively study the hydrolysis of two bonds (Ala-189-Phe-190 and Leu-192-Tyr-193) by choosing appropriate conditions. The disappearance of the substrate and the appearance of the reaction products as a function of time were followed at 220 nm by RP-HPLC. For concentrations where beta-casein was in a micellar form, the Michaelian parameters corresponding to the cleavage of bond 192-193 were determined by measuring initial rates of reaction at different substrate concentrations in a time period for which splitting of bond 189-190 was negligible. The following results were obtained; k1cat = 1.54 s-1, K1m = 0.075 mM, and k1cat/K1m = 20.6 mM-1 s-1. Under conditions where the protein was in a monomeric state, the following parameters were determined for the splitting of bond 192-193 by integrating the Michaelis equation: k2cat = 0.056 s-1, K2m = 0.007 mM, and k2cat/K2m = 79.7 mM-1 s-1. Under the latter conditions the four enzymic reactions involved in the cleavage of bonds 189-190 and 192-193 were first-order reactions. The four corresponding apparent rate constants were calculated by using a computer program. Excellent agreement was obtained between concentrations of four molecular species measured during the reaction period and those calculated by using the four apparent rate constants.     

Differential substrate behaviour of phenol and aniline derivatives during oxidation by horseradish peroxidase: kinetic evidence for a two-step mechanism

The catalytic constant (k(cat)) and the second-order association constant of compound II with reducing substrate (k(5)) of horseradish peroxidase C (HRPC) acting on phenols and anilines have been determined from studies of the steady-state reaction velocities (V(0) vs. [S(0)]). Since k(cat)=k(2)k(6)/k(2)+k(6), and k(2) (the first-order rate constant for heterolytic cleavage of the oxygen-oxygen bond of hydrogen peroxide during compound I formation) is known, it has been possible to calculate the first-order rate constant for the transformation of each phenol or aniline by HRPC compound II (k(6)). The values of k(6) are quantitatively correlated to the sigma values (Hammett equation) and can be rationalized by an aromatic substrate oxidation mechanism in which the substrate donates an electron to the oxyferryl group in HRPC compound II, accompanied by two proton additions to the ferryl oxygen atom, one from the substrate and the other the protein or solvent. k(6) is also quantitatively correlated to the experimentally determined (13)C-NMR chemical shifts (delta(1)) and the calculated ionization potentials, E (HOMO), of the substrates. Similar dependencies were observed for k(cat) and k(5). From the kinetic analysis, the absolute values of the Michaelis constants for hydrogen peroxide and the reducing substrates (K(M)(H(2)O(2)) and K(M)(S)), respectively, were obtained.     

Enzyme:substrate hydrogen bond shortening during the acylation phase of serine protease catalysis

Atomic resolution (相似文献   

Substrate recognition and catalysis by UCH-L1

Deubiquitinating enzymes regulate essential cellular processes, and their dysregulation is implicated in multiple disease states. Ubiquitin carboxy-terminal hydrolase L1 (UCH-L1) has garnered attention for its links with Parkinson's disease and cancer; however, the mechanism of action of this enzyme in cells remains poorly understood. In order to advance our understanding of UCH-L1 function, we have been developing small molecule modulators of the enzyme for use as tools to probe its role in cells. In support of these efforts, an investigation of the mechanism of UCH-L1 catalysis was previously reported. Here, we extend this mechanistic evaluation and examine substrate recognition by UCH-L1. We developed a panel of ubiquitin fusions to test the contribution of specific residues of ubiquitin to binding and catalysis by the enzyme, and determined the activation parameters of selected variants to gain additional mechanistic insight. Ubiquitin side chains critical for establishing the Michaelis complex and enabling catalysis were identified, and features of this complex that differ between UCH-L1 and a homologue, UCH-L3, were revealed. These data provide dramatic examples of differences in substrate specificity between these enzymes. The implications of our experiments with UCH-L1 for selective inhibitor design and the relationship to disease are discussed.     

Anomalous pH dependence of the reactions of carbenicillin and sulbenicillin with Bacillus cereus beta-lactamase I. Influence of the alpha-substituent charge on the kinetic parameters

The pH dependence of k(cat) for the Bacillus cereus beta-lactamase I catalyzed hydrolysis of carbenicillin(VI), which differs from benzylpenicillin (I) in having a carboxylic moiety alpha to the phenyl ring, exhibits a profile consistent with a model in which the alpha-COOH and alpha-COO forms of the ES complex turn over with respective rate constants of 2152 s(-1) and 384 s(-1). The pK(a)(app) for the alpha-COOH is shifted from 3.2 in solution to 6.1 in the ES complex. The normalized k(cat)/K(m) vs. pH profile for VI is not superimposable on that of I, indicating that both the neutral and anionic forms of the carboxyl moiety of VI combine with the enzyme to give the first irreversibly formed complex, presumably the acyl-enzyme. Quantitative accord with the kinetic data is achieved only through fitting to a model where kinetically significant proton transfer in the ES complex is permitted. The second-order rate constants for the reaction of the enzyme with the alpha-COOH and alpha-COO forms of VI are 2.2 x 10(8) M(-1) s(-1) and 3.8 x 10(6) M(-1) s(-1), respectively. The high value for the alpha-COOH form suggests that this reaction may be in part diffusion controlled. This conjecture is borne out by the observation that the sensitivity of k(cat)/K(m) to eta(rel) decreases with increasing pH for VI, whereas this sensitivity is pH independent for I. These conclusions are further supported by the results of a kinetic investigation of the pH dependence of sulbenicillin (VII) where an alpha-SO3H replaces the alpha-COOH of VI. The strongly acidic sulfonic acid moiety of VII is fully ionized throughout nearly the entire pH range of interest, and its kinetics, as a function of pH, are very similar to those observed and calculated for the alpha-COO form of VI. Solvent deuterium kinetic isotope effects are reported for k(cat) and k(cat)/K(m) for both VI and VII.