Negative dielectrophoretic patterning with different cell types

In this paper, a novel method for patterning different cell types based on negative dielectrophoresis (n-DEP), without any special pretreatment of a culture slide, has been described. An interdigitated array (IDA) electrode with four independent microelectrode subunits was fabricated with indium-tin-oxide (ITO) and used as a template to form cellular micropatterns. A suspension of C2C12 cells was introduced into the patterning device between the upper slide and the bottom IDA. In the present system, the n-DEP force is induced by applying an ac voltage (typically 12V(pp), 1MHz) to direct cells toward a weaker region of electric field strength. The cells aligned above one of the bands of IDA within 1min since the aligned areas on the slide were regions with the lower electric field. The application of an ac voltage for 5min allows the cells to adsorb onto the cell culture slide. After removing excess cells, the second cell type was patterned in lines using the same method as with the first set of cells. Periodic and alternate cell lines incorporating two cell types were also fabricated by changing the ac voltage mode. A second cell type was introduced into the device and guided to other areas to form a different pattern. The described system enables two cell types to be patterned in 15min. The patterning method provides a novel tool for use in fundamentals studies of cell biology based on cell-cell interactions between different cell types.     

Effect of actin cytoskeleton disruption on electric pulse‐induced apoptosis and electroporation in tumour cells

Electric pulses are known to affect the outer membrane and intracellular structures of tumour cells. By applying electrical pulses of 450 ns duration with electric field intensity of 8 kV/cm to HepG2 cells for 30 s, electric pulse‐induced changes in the integrity of the plasma membrane, apoptosis, viability and mitochondrial transmembrane potential were investigated. Results demonstrated that electric pulses induced cell apoptosis and necrosis accompanied with the decrease of mitochondrial transmembrane potential and the formation of pores in the membrane. The role of cytoskeleton in cellular response to electric pulses was investigated. We found that the apoptotic and necrosis percentages of cells in response to electric pulses decreased after cytoskeletal disruption. The electroporation of cell was not affected by cytoskeletal disruption. The results suggest that the disruption of actin skeleton is positive in protecting cells from killing by electric pulses, and the skeleton is not involved in the electroporation directly.     

Dielectrophoretic registration of living cells to a microelectrode array

We present a novel microfabricated device to simultaneously and actively trap thousands of single mammalian cells in alignment with a planar microelectrode array. Thousands of 3 micromdiameter trapping electrodes were fabricated within the bottom of a parallel-plate flow chamber. Cells were trapped on the electrodes and held against destabilizing fluid flows by dielectrophoretic forces generated in the device. In general, each electrode trapped only one cell. Adhesive regions were patterned onto the surface in alignment with the traps such that cells adhered to the array surface and remained in alignment with the electrodes. By driving the device with different voltages, we showed that trapped cells could be killed by stronger electric fields. However, with weaker fields, cells were not damaged during trapping, as indicated by the similar morphologies and proliferation rates of trapped cells versus controls. As a test of the device, we patterned approximately 20000 cells onto a 1cm(2) grid of rectangular adhesive regions, with two electrodes and thus two cells per rectangle. Our method obtained 70+/-1% fidelity versus 17+/-1% when using an existing cell-registration technique. By allowing the placement of desired numbers of cells at specified locations, this approach addresses many needs to manipulate and register cells to the surfaces of biosensors and other devices with high precision and fidelity.     

Dielectrophoretic registration of living cells to a microelectrode array

We present a novel microfabricated device to simultaneously and actively trap thousands of single mammalian cells in alignment with a planar microelectrode array. Thousands of 3 Ipm diameter trapping electrodes were fabricated within the bottom of a parallel-plate flow chamber. Cells were trapped on the electrodes and held against destabilizing fluid flows by dielectrophoretic forces generated in the device.In general, each electrode trapped only one cell. Adhesive regions were patterned onto the surface in alignment with the traps such that cells adhered to the array surface and remained in alignment with the electrodes. By driving the device with different voltages, we showed that trapped cells could be killed by stronger electric fields. However, with weaker fields, cells were not damaged during trapping, as indicated by the similar morphologies and proliferation rates of trapped cells versus controls. As a test of the device, we patterned approximately 20,000 cells onto aI cm2 grid of rectangular adhesive regions, with two electrodes and thus two cells per rectangle. Our method obtained 70 +/- 1% fidelity versus 17 +/- 1% when using an existing cell-registration technique. By allowing the placement of desired numbers of cells at specified locations, this approach addresses many needs to manipulate and register cells to the surfaces of biosensors and other devices with high precision and fidelity.     

Computer Simulation of Cellular Patterning Within the Drosophila Pupal Eye

We present a computer simulation and associated experimental validation of assembly of glial-like support cells into the interweaving hexagonal lattice that spans the Drosophila pupal eye. This process of cell movements organizes the ommatidial array into a functional pattern. Unlike earlier simulations that focused on the arrangements of cells within individual ommatidia, here we examine the local movements that lead to large-scale organization of the emerging eye field. Simulations based on our experimental observations of cell adhesion, cell death, and cell movement successfully patterned a tracing of an emerging wild-type pupal eye. Surprisingly, altering cell adhesion had only a mild effect on patterning, contradicting our previous hypothesis that the patterning was primarily the result of preferential adhesion between IRM-class surface proteins. Instead, our simulations highlighted the importance of programmed cell death (PCD) as well as a previously unappreciated variable: the expansion of cells'' apical surface areas, which promoted rearrangement of neighboring cells. We tested this prediction experimentally by preventing expansion in the apical area of individual cells: patterning was disrupted in a manner predicted by our simulations. Our work demonstrates the value of combining computer simulation with in vivo experiments to uncover novel mechanisms that are perpetuated throughout the eye field. It also demonstrates the utility of the Glazier–Graner–Hogeweg model (GGH) for modeling the links between local cellular interactions and emergent properties of developing epithelia as well as predicting unanticipated results in vivo.     

Hey2 functions in parallel with Hes1 and Hes5 for mammalian auditory sensory organ development

Background  

During mouse development, the precursor cells that give rise to the auditory sensory organ, the organ of Corti, are specified prior to embryonic day 14.5 (E14.5). Subsequently, the sensory domain is patterned precisely into one row of inner and three rows of outer sensory hair cells interdigitated with supporting cells. Both the restriction of the sensory domain and the patterning of the sensory mosaic of the organ of Corti involve Notch-mediated lateral inhibition and cellular rearrangement characteristic of convergent extension. This study explores the expression and function of a putative Notch target gene.     

Tissue scaffold surface patterning for clinical applications

Patterned scaffold surfaces provide a platform for highly defined cellular interactions, and have recently taken precedence in tissue engineering. Despite advances in patterning techniques and improved tissue growth, no clinical studies have been conducted for implantation of patterned biomaterials. Four major clinical application fields where patterned materials hold great promise are antimicrobial surfaces, cardiac constructs, neurite outgrowth, and stem cell differentiation. Specific examples include applications of patterned materials to (i) counter infection by antibiotic resistant bacteria, (ii) establish proper alignment and contractile force of regrown cardiac cells for repairing tissue damaged by cardiac infarction, (iii) increase neurite outgrowth for central nervous system wound repair, and (iv) host differentiated stem cells while preventing reversion to a pluripotent state. Moreover, patterned materials offer unique advantages for artificial implants which other constructs cannot. For example, by inducing selective cell adhesion using topographical cues, patterned surfaces present cellular orientation signals that lead to functional tissue architectures. Mechanical stimuli such as modulus, tension, and material roughness are known to influence tissue growth, as are chemical stimuli for cell adhesion. Scaffold surface patterns allow for control of these mechanical and chemical factors. This review identifies research advances in scaffold surface patterning, in light of pressing clinical needs requiring organization of cellular interactions.     

Electrophoretic repatterning of charged cytoplasmic molecules within tissues coupled by gap junctions by externally applied electric fields

Ionic currents and cytoplasmic voltage gradients have been observed in a variety of polarizing cells and developing tissues. In certain cases, it has been determined that these endogenous electric fields can segregate intracellular charged molecules by electrophoresis; in other cases, the endogenous fields are suspected to have such an influence. Separate theoretical suggestions have been made that extracellular electric currents, whether from a biological or a nonbiological source, should be able to electrophorese intracellular molecules after being conducted through cell membranes into the interior of long single cells [L.F. Jaffe and R. Nuccitelli (1977) Annu. Rev. Biophys. Bioeng. 6, 445-476] or extended ensembles of cells coupled electrotonically by gap junctions [M.S. Cooper (1984) J. Theor. Biol. 111, 123-130]. To test whether external electric fields could redistribute intracellular molecules within a tissue coupled by gap junctions, and to quantitatively measure in situ the electrophoretic mobility of a charged intracellular molecule, we injected 6-carboxyfluorescein into the electrotonically coupled lateral giant neurons of the crayfish abdominal nerve cord. When a dc electric field (0.2-3.4 V/cm) was subsequently applied along the length of the cord, the negatively charged fluorescent dye was observed to migrate through both the cytoplasms and the gap junctions of the lateral giant neurons, toward the anode, at a rate directly proportional to the applied electric field strength (electrophoretic mobility = -0.92 +/- 0.27 micron/sec per V/cm). These results suggest that electric fields of a sufficient magnitude, whether of an exogenous or an endogenous origin, can repattern the distribution of charged molecules within the cytoplasm of an extended ensemble of coupled cells. In addition, these results suggest that externally applied electric fields might be used in studies of pattern formation to repattern the intercellular distribution of charged molecules that are permeant to gap junctions within electrically coupled tissues.     

Calmodulin transit via gap junctions is reduced in the absence of an electric field

Gap junctional transport of Calmodulin (CaM) from epithelial cells to insect oocytes is enhanced by alignment of the molecules via an electric field. It has recently been shown that CaM is needed for uptake of vitellogenins, is produced in the epithelial cells and reaches oocytes via gap junctions. For CaM to transit the gap junctions something must align these elongated molecules with the lumina of the gap junctions. This might be accomplished by the electric field that exists at the membrane of any cell with an Em of >0 mV. Fluorescently labeled CaM was injected into oocytes. At t=0, the epithelial cell/oocyte "fluorescence" ratio showed epithelial cells to be 24%+/-1.5% as bright as the injected oocyte. In follicles which maintained an electric field for one hour the epithelial cell/oocyte fluorescence ratio had risen to 79%+/-1.4%, while for follicles in which the field was cancelled by holding Em at 0 mV the ratio was only 45%+/-1.7%. After termination of the holding current follicles regained their original Em and their original electric field. At the end of a second hour of incubation the ratio had risen to 76%+/-1.2%, very close to what was observed in the untreated control follicles.     

Influence of cell adhesion and spreading on impedance characteristics of cell-based sensors

Impedance measurements of cell-based sensors are a primary characterization route for detection and analysis of cellular responses to chemical and biological agents in real time. The detection sensitivity and limitation depend on sensor impedance characteristics and thus on cell patterning techniques. This study introduces a cell patterning approach to bind cells on microarrays of gold electrodes and demonstrates that single-cell patterning can substantially improve impedance characteristics of cell-based sensors. Mouse fibroblast cells (NIH3T3) are immobilized on electrodes through a lysine-arginine-glycine-aspartic acid (KRGD) peptide-mediated natural cell adhesion process. Electrodes are made of three sizes and immobilized with either covalently bound or physically adsorbed KRGD (c-electrodes or p-electrodes). Cells attached to c-electrodes increase the measurable electrical signal strength by 48.4%, 24.2%, and 19.0% for three electrode sizes, respectively, as compared to cells attached to p-electrodes, demonstrating that both the electrode size and surface chemistry play a key role in cell adhesion and spreading and thus the impedance characteristics of cell-based sensors. Single cells patterned on c-electrodes with dimensions comparable to cell size exhibit well-spread cell morphology and substantially outperform cells patterned on electrodes of other configurations.     

A packed Cytodex microbead array for three-dimensional cell-based biosensing

A packed Cytodex 3 microbead array was fabricated as a simple three-dimensional (3-D) cell-based biosensing format. Resting membrane potentials and voltage-gated calcium channel (VGCC) function of SH-SY5Y human neuroblastoma cells cultured on the microbead array versus collagen-coated flat (2-D) substrates were evaluated by confocal microscopy with a potentiometric dye, tetramethylrhodamine methyl ester, and a calcium fluorescent indicator, Calcium Green-1. SH-SY5Y cells, differentiated with 1mM dibutyryl cAMP and 2.5 microM 5-bromodeoxyuridine, showed significant resting membrane potential establishment on the topographical scaffolds in a period of 13 days into differentiation, in contrast to the previously reported insignificant resting membrane potential establishment of the same cells within collagen hydrogels. On days 2, 8 and 13 into differentiation, cells on collagen-coated flat substrates developed resting membrane potentials of -6.0+/-19.5 mV (n=198), -30.5+/-19.9 mV (n=191) and -21.7+/-18.9 mV (n=308), in contrast to values for cells on 3-D scaffolds of -25.8+/-14.7 mV (n=112), -37.6+/-13.1 mV (n=120) and -28.7+/-12.2 mV (n=158), respectively. The development of VGCC function, as measured by percentage of cells responsive to 50 mM high K(+) depolarization, was significantly slower for cells on 3-D scaffolds (20.0% on day 13 into differentiation) than for cells on 2-D substrates (30.7% on day 8 into differentiation). The exaggerated 2-D cell calcium dynamics, in comparison with those of 3-D cells, is consistent with previous 2-D/3-D comparative studies. This study established the rationale and feasibility of the microbead array format for 3-D cell-based biosensing.     

Electric Field-Assisted Delivery of Photofrin to Human Breast Carcinoma Cells

The influence of electroporation on the Photofrin uptake and distribution was evaluated in the breast adenocarcinoma cells (MCF-7) and normal Chinese hamster ovary cells (CHO) lacking voltage-dependent channels in vitro. Photofrin was used at a concentration of 5 and 25 μM. The uptake of Photofrin was assessed using flow cytometry and fluorescence microscopy methods. Cells viability was evaluated with crystal violet assay. Our results indicated that electropermeabilization of cells, in the presence of Photofrin, increased the uptake of the photosensitizer. Even at the lowest electric field intensity (700 V/cm) Photofrin transport was enhanced. Flow cytometry results for MCF-7 cells revealed ~1.7 times stronger fluorescence emission intensity for cells exposed to Photofrin and electric field of 700 V/cm than cells treated with Photofrin alone. Photofrin was effective only when irradiated with blue light. Our studies on combination of photodynamic reaction with electroporation suggested improved effectiveness of the treatment and showed intracellular distribution of Photofrin. This approach may be attractive for cancer treatment as enhanced cellular uptake of Photofrin in MCF-7 cells can help to reduce effective dose of the photosensitizer and exposure time in this type of cancer, diminishing side effects of the therapy.     

Comparative Endothelial Cell Response on Topographically Patterned Titanium and Silicon Substrates with Micrometer to Sub-Micrometer Feature Sizes

In this work, we evaluate the in vitro response of endothelial cells (EC) to variation in precisely-defined, micrometer to sub-micrometer scale topography on two different substrate materials, titanium (Ti) and silicon (Si). Both substrates possess identically-patterned surfaces composed of microfabricated, groove-based gratings with groove widths ranging from 0.5 to 50 µm, grating pitch twice the groove width, and groove depth of 1.3 µm. These specific materials are chosen due to their relevance for implantable microdevice applications, while grating-based patterns are chosen for the potential they afford for inducing elongated and aligned cellular morphologies reminiscent of the native endothelium. Using EA926 cells, a human EC variant, we show significant improvement in cellular adhesion, proliferation, morphology, and function with decreasing feature size on patterned Ti substrates. Moreover, we show similar trending on patterned Si substrates, albeit to a lesser extent than on comparably patterned Ti substrates. Collectively, these results suggest promise for sub-micrometer topographic patterning in general, and sub-micrometer patterning of Ti specifically, as a means for enhancing endothelialization and neovascularisation for novel implantable microdevice applications.     

Viability and differential function of rainbow trout liver cells in primary culture: Coculture with two permanent fish cells

Summary The study investigates the influence of different culture conditions on attachment, viability and functional status of rainbow trout (Oncorhynchus mykiss) liver cells in primary culture. Cells were isolated by a two-step collagenase perfusion and incubated in serum-free, chemically defined minimal essential medium (MEM), (a) as a monolayer on uncoated PRI-MARIA? dishes, (b) as a monolayer on culture dishes coated with calf collagen type 1, and (c) in coculture with the established fish cell lines RTH-149 or RTG-2. Cell attachment was assessed from DNA and protein concentrations per dish, viability was estimated from cellular lactate dehydrogenase release, and the metabolic status was investigated by measuring activities of the phosphoenolpyruvate carboxykinase and biotransformation enzymes as well as the total cytochrome P450 contents. Seeding of hepatocytes on collagen-coated dishes did not alter cell attachment or detachment from the culture substrate, but had a small, but not significant effect on cell viability and metabolic parameters. Coculture of liver cells and RTG-2 cells reduced hepatocyte detachment from the culture substrate, and it was associated with a significant elevation of 7-ethoxyresorufin-O-deethylase activities in the hepatic cells. Cytochrome P450 contents, however, were not altered. The coculture effect on liver cell physiology clearly depended on the type of cell line, because coculture with RTH-149 cells led to similar, but much weaker effects than obtained in cocultures with RTG-2 cells. Electron microscopical observations revealed the existence of gap junctions and possible exocytosis-like transport between cell lines and hepatocytes. The results point to the potential of coculture systems to improve physiological parameters of trout liver cells in primary culture.     

Modification of electrokinetic properties of nuclei in human buccal epithelial cells by electric fields

The influence of an alternating (50 Hz) electric field (5--110 V/cm) on the state of human buccal epithelium cells was studied by the methods of intracellular microelectrophoresis, heterochromatin staining with orcein, and indigo carmine staining for viability and membrane integrity evaluations. Electric field exposure induced an increase in electrophoretic mobility of cell nuclei, decreased numbers of heterochromatin granules near the inner membrane of cell nucleus, and induced cell membrane damage; but cell viability was conserved. Nuclear and cell membrane properties varied with electric field strength and age of the donors. The data obtained are interpreted as evidence of electric field induced activation of the functional state of nuclei.     

Specific electric resistance of a narrow gap between two lipid bilayer membranes

The study deals with measurements of specific electric resistance of a narrow gap between two bilayer lipid membranes (BLM). The technique is based upon the influence of the outer electric field on the distance between two BLM which has been revealed earlier. The curve of specific resistance/solution ionic strength obtained suggests that surface conductivity is significant in similar systems. In gaps narrower than 40 nm possible increase of water viscosity must be also taken into consideration. A hypothetic mechanism of electric connection between cells is proposed.     

Action of 50 Hz magnetic fields on neurite outgrowth in pheochromocytoma cells

This study tests the capacity of 50 Hz magnetic and electric fields to stimulate neurite outgrowth in PC-12D cells, a cell line which originated from a pheochromocytoma in rat adrenal medulla. The cells were plated on collagen-coated, plastic petri dishes and exposed to sinusoidal 50 Hz magnetic fields for 22 h in a 5% CO₂ incubator at 37°C. Two 1,000 turn coils, 20 cm in diameter, were assembled in a Helmholtz configuration to generate a magnetic field in a vertical orientation, thereby inducing a companion electric field in the dish with intensity proportional to radius. A magnetic-field shield housed the control samples in the same incubator. Total cells and number of cells with neurites at least as long as one cell diameter or having a growth cone were counted within a radius of 0.3 cm of the dish center and within an annulus of 1.7–1.8 cm radii in 60 mm dishes, at 3.6 cm radius in 100 mm dishes, and between 1.9 and 2.1 cm radii in the outer well of organ culture dishes, which are physically separated into two concentric wells. Sham exposure demonstrated no difference in percentage of cells with neurites between the exposed and control locations in the incubator. Exposures were done at 4.0. 8.9, 22, 29, 40, 120, 236, and 400 milliGauss (mG). At dish radii of 1.7–1.8 cm in the 60 mm dishes these magnetic flux densities induced electric fields of 1.1, 2.5, 5.9, 8.1, 11, 33, 65, and 110 μV/m, respectively, while within a radius of 0.3 cm, the induced electric fields were less than 0.2, 0.4, 1.0, 1.5, 1.9, 6.0, 11, and 19 μV/m, respectively. For other dishes, the larger radii produced proportionally larger induced electric fields. At each field strength, there were two control dishes and four to nine exposed dishes: 100 or more cells were counted at each location on the dishes. The results demonstrate that magnetic fields stimulate neurite outgrowth in a flux-density-dependent manner between 22 and 40 mG, reaching an apparent stimulation plateau between 40 and 400 mG; no effects were seen at 8.9 mG or lower. There was no apparent neurite stimulation due to the electric field. Although relatively low intensity (?22mG) magnetic fields alone can stimulate a morphological response in a cell which is normally stimulated by nerve growth factor molecules binding to membrane receptors, the chemical basis of this response is unknown. © 1993 Wiley-Liss. Inc.     

Using a Spread Sheet Program to Model the Interaction of Low-Frequency Electric Fields with Inhomogeneous,Irregularly Shaped Objects

This paper describes the use of an ordinary business spread sheet program to calculate, using a two-stage finite difference method, the electric fields and current densities produced inside irregularly shaped models of the upper arm and forearm. The limb interiors are inhomogeneous, being represented as realistic cross-sections of bone and muscle.

A spread sheet forms a two-dimensional array. Each cell of the sheet can correspond to a physical element of space. Equations entered into the cells then represent the relationships among the potentials of the corresponding spatial elements.

The model is validated for a two-layer, lossy dielectric cylinder. Good agreement is obtained between the numerical and analytical solutions in this case except near the boundaries of the outer layer. The electric field within the limb depends on the shape and orientation of the limb relative to the applied field. The flow of current around the less conductive bones in the forearm can be observed.     

Kidney proximal tubular cells isolated by collagenase perfusion grow in defined media in the absence of growth factors

Cells from kidney proximal tubules have been successfully isolated, characterized, and cultured from male Fischer 344 rats between 150-400 g using a two-step collagenase perfusion. The cells undergo high levels of DNA synthesis and mitosis in both serum free media (with an without hormone supplementation) and media containing 10% fetal bovine serum. Confluent monolayers were observed between 5 to 7 days after seeding 2 X 10(5) cell/35 mm collagen-coated plate. Approximately 50% of the total kidney and 70% of the cortex was isolated using this technique. The viability of the isolated tubules was 75 +/- 8% and the estimated number of viable cells was 12 +/- 3 X 10(6) cells. At the time of isolation greater than 90% of the isolated tubules and cells were positive for gamma glutamyltransferase (GGT), periodic acid-schiff (PAS), and glucose-6-phosphatase (G-6-Pase). Both GGT and G-6-Pase decreased rapidly during the first 3 days in primary culture as assessed by histochemistry. Ultrastructurally the isolates consisted of cells with numerous microvilli and mitochondria. The size and number of microvilli decrease rapidly in primary culture. The morphologic and biochemical evidence suggests that the primary isolates and cultures are proximal tubular in origin.     

Two-step cell patterning on planar and complex curved surfaces by precision spraying of polymers

Controlling adhesion of living animal cells plays a key role in biosensor fabrication, drug-testing technologies, basic biological research, and tissue engineering applications. Current techniques for cell patterning have two primary limitations: (1) they require photolithography, and (2) they are limited to patterning of planar surfaces. Here we demonstrate a simple, precision spraying method for both positive and negative patterning of planar and curved surfaces to achieve cell patterns rapidly and reproducibly. In this method, which we call precision spraying (PS), a polymer solution is aerosolized, focused with sheath airflow through an orifice, and deposited on the substrate using a deposition head to create approximately 25 microm sized features. In positive patterning, adhesive molecules, such as laminin or polyethylenimine (PEI) were patterned on polydimethylsiloxane (PDMS) substrates in a single spraying operation. A variety of animal cell types were found to adhere to the adhesive regions, and avoid the non-adhesive (bare PDMS) regions. In negative patterning, hydrophobic materials, such as polytetrafluoroethylene (PTFE) and PDMS, were patterned on glass substrates. Cells then formed patterns on the exposed glass regions and avoided the hydrophobic regions. Cellular patterns were maintained for up to 2 weeks in the presence of serum, which normally fouls non-adhesive regions. Additionally, we found that precision spraying enabled micropatterning of complex-curved surfaces. Our results show that precision spraying followed by cell plating enables rapid and flexible cellular micropatterning in two simple steps.