Single-step purification of recombinant Thermus aquaticus DNA polymerase using DNA-aptamer immobilized novel affinity magnetic beads

A DNA aptamer specific for Thermus aquaticus DNA polymerase (Taq-polymerase) was immobilized on magnetic beads, which were prepared in the presented study. The effect of various parameters including pH, temperaturem and aptamer concentration on the immobilization of 5'-thiol labeled DNA-aptamer onto glutaric dialdhyde activated magnetic beads was evaluated. The binding conditions of Taq-polymerase on the aptamer immobilized magnetic beads were studied using commercial Taq-polymerase to characterize the surface complexation reaction. Efficiency of affinity magnetic beads in the purification of recombinant Taq-polymerase from crude extracts was also evaluated. For this case, the enzyme "recombinant Taq-DNA polymerase" was cloned and expressed using an Amersham E. coli GST-Gene Fusion Expression system. Crude extracts were in contact with affinity magnetic beads for 30 min and were collected by magnetic field application. The purity of the eluted Tag-polymerase from the affinity beads, as determined by HPLC, was 93% with a recovery of 89% in a one-step purification protocol. Apparently, the system was found highly effective as one step for the low-cost purification of Taq-polymerase in bacterial crude extract.     

Design,synthesis and application of benzyl‐sulfonate biomimetic affinity adsorbents for monoclonal antibody purification from transgenic corn

The human anti‐human immunodeficiency virus (HIV) antibody 2G12 (mAb 2G12) is one of the most broadly neutralizing antibodies against HIV that recognizes a unique epitope on the surface glycoprotein gp120. In the present work, a limited affinity‐ligand library was synthesized and evaluated for its ability to bind and purify recombinant mAb 2G12 expressed in transgenic corn. The affinity ligands were structural fragments of polysulfonate triazine dye Cibacron Blue 3GA (CB3GA) and represent novel lead scaffolds for designing synthetic affinity ligands. Solid phase chemistry was used to synthesize variants of CB3GA lead ligand. One immobilized ligand, bearing 4‐aminobenzyl sulfonic acid (4ABS) linked on two chlorine atoms of the triazine ring (4ABS‐Trz‐4ABS), displayed high affinity for mAb 2G12. Absorption equilibrium, 3D molecular modelling and molecular dynamics simulation studies were carried out to provide a detailed picture of the 4ABS‐Trz‐4ABS interaction with mAb 2G12. This biomimetic affinity ligand was exploited for the development of a facile two‐step purification protocol for mAb 2G12. In the first step of the procedure, mAb 2G12 was purified on an S‐Sepharose FF cation exchanger, and in the second step, mAb 2G12 was purified using affinity chromatography on 4ABS‐Trz‐4ABS affinity adsorbent. Analysis of the antibody preparation by sodium dodecyl sulfate‐polyacrylamide gel electrophoresis and enzyme‐linked immunosorbent assay showed that the mAb 2G12 was fully active and of sufficient purity suitable for analytical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

pAM401-based shuttle vectors that enable overexpression of promoterless genes and one-step purification of tag fusion proteins directly from Enterococcus faecalis

Two novel Enterococcus faecalis-Escherichia coli shuttle vectors that utilize the promoter and ribosome binding site of bacA on the E. faecalis plasmid pPD1 were constructed. The vectors were named pMGS100 and pMGS101. pMGS100 was designed to overexpress cloned genes in E. coli and E. faecalis and encodes the bacA promoter followed by a cloning site and stop codon. pMGS101 was designed for the overexpression and purification of a cloned protein fused to a Strep-tag consisting of 9 amino acids at the carboxyl terminus. The Strep-tag provides the cloned protein with an affinity to immobilized streptavidin that facilitates protein purification. We cloned a promoterless beta-galactosidase gene from E. coli and cloned the traA gene of the E. faecalis plasmid pAD1 into the vectors to test gene expression and protein purification, respectively. beta-Galactosidase was expressed in E. coli and E. faecalis at levels of 10(3) and 10 Miller units, respectively. By cloning the pAD1 traA into pMGS101, the protein could be purified directly from a crude lysate of E. faecalis or E. coli with an immobilized streptavidin matrix by one-step affinity chromatography. The ability of TraA to bind DNA was demonstrated by the DNA-associated protein tag affinity chromatography method using lysates prepared from both E. coli and E. faecalis that overexpress TraA. The results demonstrated the usefulness of the vectors for the overexpression and cis/trans analysis of regulatory genes, purification and copurification of proteins from E. faecalis, DNA binding analysis, determination of translation initiation site, and other applications that require proteins purified from E. faecalis.     

Protein affinity chromatography reveals cell cycle dependent association of cellular factors with human DNA polymerase α

DNA polymerase α/primase (Polα) is the key replication enzyme in eukaryotic cells. This enzyme synthesizes and elongates short RNA primers at an unwound origin of replication. Polα was used as an affinity ligand to identify cellular replication factors interacting with it. Protein complexes between Polα and cellular factors were analyzed by co-immunoprecipitations with monoclonal antibodies directed against Polα and by protein affinity chromatography of cell extracts derived from pure G₁-and S-phase cell populations on Polα affinity columns. Co-immunoprecipitations resulted in the identification of a polypeptide with a molecular weight of 46 kDa. For Polα affinity chromatography, the ligand was purified from insect cells infected with a recombinant baculovirus encoding the catalytic subunit (p180) of Polα (Copeland and Wang, 1991). With 5×10⁸ infected Sf9 cells, a rapid one step purification protocol was used which yielded in five hours 0.6 mg pure enzyme with a specific activity of 140,000 units/mg. The G₁-and S-phase cell populations were generated by block, release and counterflow centrifugal elutriation of exponentially growing human MANCA cells. Starting with 2×10⁹ non synchronous cells, 5×10⁸ G₁-phase cells were isolated. Chromatography of cell extracts derived from G₁-or S-phase cells on Polα affinity columns resulted in identifying several polypeptides in the range of 40–70 kDa. Some of these polypeptides are more abundant in eluates derived from S-phase extracts than from G₁-phase extracts.     

Development and validation of an affinity chromatography step using a peptide ligand for cGMP production of factor VIII

An affinity chromatography step was developed for purification of recombinant B-Domain Deleted Factor VIII (BDDrFVIII) using a peptide ligand selected from a phage display library. The peptide library had variegated residues, contained both within a disulfide bond-constrained ring and flanking the ring. The peptide ligand binds to BDDrFVIII with a dissociation constant of approximately 1 microM both in free solution and when immobilized on a chromatographic resin. The peptide is chemically synthesized and the affinity resin is produced by coupling the peptide to an agarose matrix preactivated with N-hydroxysuccinimide. Coupling conditions were optimized to give consistent and complete ligand incorporation and validated with a robustness study that tested various combinations of processing limits. The peptide affinity chromatographic operation employs conditions very similar to an immunoaffinity chromatography step currently in use for BDDrFVIII manufacture. The process step provides excellent recovery of BDDrFVIII from a complex feed stream and reduces host cell protein and DNA by 3-4 logs. Process validation studies established resin reuse over 26 cycles without changes in product recovery or purity. A robustness study using a factorial design was performed and showed that the step was insensitive to small changes in process conditions that represent normal variation in commercial manufacturing. A scaled-down model of the process step was qualified and used for virus removal studies. A validation package addressing the safety of the leached peptide included leaching rate measurements under process conditions, testing of peptide levels in product pools, demonstration of robust removal downstream by spiking studies, end product testing, and toxicological profiling of the ligand. The peptide ligand affinity step was scaled up for cGMP production of BDDrFVIII for clinical trials.     

pGSTag--a versatile bacterial expression plasmid for enzymatic labeling of recombinant proteins.

We report on the construction of a plasmid, pGSTag, that directs the expression in E. coli of a glutathione S-transferase fusion protein that contains a high affinity phosphorylation site by protein kinase-A (PK-A). The fusion protein, following purification from crude bacterial lysates by substrate affinity chromatography, can be labeled in vitro to high specific activity with purified PK-A and 32P-gamma-ATP. Because labeling takes place while the fusion protein is immobilized on a solid support, the unincorporated label and enzyme can be washed away. Using the leucine-zipper domains of cAMP response element binding (CREB) proteins and CCAAT/enhancer binding protein (C/EBP)-like proteins as a model system, we show that the labeled protein, after elution from the affinity resin, can be used as a probe to detect interacting (dimerizing) species in a nitrocellulose-based ligand blot assay. The utility of this system for the creation of labeled protein probes is discussed.     

Purification of recombinant enhanced green fluorescent protein expressed in Escherichia coli with new immobilized metal ion affinity magnetic absorbents

A new immobilized metal ion affinity (IMA) adsorbent containing superparamagnetic nanoparticles and coated with hydrophilic resins are proposed here to improve the purification of His-tagged proteins. The magnetic chelating resin was prepared by radical polymerization of magnetite (Fe3O4), styrene, divinyl benzene (DVB) and glycidyl methacrylate-iminodiacetic acid (GMA-IDA) in ethanol/water medium. IDA is immobilized on magnetite as a ligand and pre-charged Cu2+, Zn2+ and Ni2+ as metal ions. To identify the GMA-IDA magnetic particles easily, we named these particles MPGI. The MPGI adsorbent was used to test their suitability for the direct recovery of an intracellular, polyhistidine-tagged protein, enhanced green fluorescent protein [EGFP-(His)(6)], from Escherichia coli lysates in a single step. Parameters influencing the purification efficiencies such as pH, ionic strength and imidazole concentration were optimized to achieve improved separation. The optimal selectively was observed in binding buffer (0.2M NaCl, 0.02M imidazole), washing buffer (0.4M NaCl, 0.03 M imidazole) and elution buffer (0.50M imidazole). The Cu2+-charged MPGI adsorbent had the highest yield and purification factor at 70.4% and 12.3, respectively. The calculated isotherm parameters (Q(m)=53.5 mg/g, K(d)=5.84 mg/mL and Q(m)/K(d)=9.2 mL/g) indicated that the MPGI adsorbent could be used as a suitable adsorbent for EGFP from an aqueous solution.     

水稻cDNA c73片段在大肠杆菌中的表达及其产物的纯化

曾以水稻蜡质基因５’调控区内一段３１ ｂｐ 片段为探针,用酵母单杂交法从水稻ｃＤＮＡ 文库中筛选出若干个其编码的蛋白可能与此３１ ｂｐ 片段结合的ｃＤＮＡ克隆,现将其中的ｐＣ７３ 克隆中的插入片段ｃ７３ 连接到含Ｈｉｓ６ 的表达载体ｐＥＴ２８ｃ（ ＋ ） 上,在大肠杆菌ＢＬ２１（ＤＥ３） 中进行诱导表达,并用ＮｉＮＴＡ 树脂纯化得到预期的融合表达产物。在合适的诱导表达条件下,融合表达产物主要以可溶形式存在于大肠杆菌细胞内;表达量占到大肠杆菌总蛋白的１０ ％ 左右;经ＮｉＮＴＡ 树脂亲和层析纯化得到的产物纯度达９５ ％ ,可供进一步研究之用。     

Ni2+-based immobilized metal ion affinity chromatography of lactose operon repressor protein from Escherichia coli

A two-step chromatographic sequence is described for the purification of native lactose operon repressor protein from Escherichia coli cells. The first step involves Ni(2+)-based immobilized metal ion affinity chromatography of the soluble cytoplasmic extract. This method provides superior speed, resolution and yield than the established phosphocellulose cation-exchange chromatographic procedure. Anion-exchange chromatography is used for further purification to >95% purity. The identity and purity of the lactose repressor protein were demonstrated using sodium dodecylsulphate polyacrylamide electrophoresis, crystallization, tryptic finger-printing mass spectrometry, and inducer binding assays. The purified lac repressor exhibited inducer sensitivity for operator DNA binding and undergoes a conformational change upon inducer binding. By all these extensive biochemical criteria, the purified protein behaves exactly as that described for the Escherichia coli lactose operon repressor.     

Combinatorial de novo design and application of a biomimetic affinity ligand for the purification of human anti‐HIV mAb 4E10 from transgenic tobacco

Monoclonal anti‐HIV antibody 4E10 (mAb 4E10) is one of the most broadly neutralizing antibodies against HIV, directed against a specific epitope on envelope protein gp41. In the present study, a combinatorial de novo design approach was used for the development of a biomimetic ligand for the affinity purification of mAb 4E10 from tobacco transgenic extract in a single chromatographic step. The biomimetic ligand (4E10lig) was based on a L ‐Phe/β‐Ala bi‐substituted 1,3,5‐triazine (Trz) scaffold (β‐Ala‐Trz‐L ‐Phe, 4E10lig) which potentially mimics the more pronounced electrostatic and hydrophobic interactions of mAb 4E10‐binding sequence determined by screening of a random peptide library. This library was comprised of Escherichia coli cells harboring a plasmid (pFlitrx) engineered to express a fusion protein containing random dodecapeptides that were inserted into the active loop of thioredoxin, which itself was inserted into the dispensable region of the flagellin gene. Adsorption equilibrium studies with this biomimetic ligand and mAb 4E10 determined a dissociation constant (K_D) of 0.41 ± 0.05 µM. Molecular modeling studies of the biomimetic ligand revealed that it can potentially occupy the same binding site as the natural binding core peptide epitope. The biomimetic affinity adsorbent was exploited in the development of a facile mAb 4E10 purification protocol, affording mAb 4E10 of high purity (approximately 95%) with good overall yield (60–80%). Analysis of the antibody preparation by SDS‐PAGE, enzyme‐linked immunosorbent assays (ELISA), and western blot showed that the mAb 4E10 was fully active and free of degraded variants, polyphenols, and alkaloids. Copyright © 2009 John Wiley & Sons, Ltd.     

Affinity purification of plasmid DNA by temperature-triggered precipitation

This report describes a new plasmid DNA purification method, which takes advantage of the DNA-binding affinity and specificity of the bacterial metalloregulatory protein MerR, and of the temperature responsiveness of elastin-like proteins (ELPs). Upon increasing the temperature, ELP undergoes a reversible phase transition from water-soluble forms into aggregates, and this property was exploited for the precipitation of plasmid DNA containing the MerR recognition sequence by a simple temperature trigger. In one purification step, plasmid DNA was purified from E. coli cell lysates to a better purity than that prepared by a standard alkaline purification method, with no contaminating chromosomal DNA and cellular proteins. This protein-based approach, in combination with the reversible phase transition feature of ELP, makes the outlined method a promising candidate for large-scale purification of plasmid DNA for sensitive applications such as nonviral gene therapy or DNA vaccines.     

A high-throughput assay to identify compounds that can induce dimerization of the erythropoietin receptor

Catalytic chromatography exploits both specific biological affinity and catalytic specificity to selectively purify enzymes. Two different applications are presented. Purification of EcoRI restriction endonuclease to apparent homogeneity was accomplished in a single step with significantly greater yield and purification than was obtained with affinity chromatography. An attempt to purify the multiple DNA polymerase activities of Escherichia coli was also developed. Five well-resolved peaks of DNA polymerase activity were fractionated. In this new chromatographic mode, the enzyme binds immobilized substrate coupled to a column in the absence of some required cofactor. When the missing cofactor is added, the enzyme converts substrate to product and selectively elutes from the column.     

Purification by affinity chromatography of 2,4-dienoyl-CoA reductases from bovine liver and Escherichia coli

1. Dye-ligand chromatography using immobilized Cibacron blue F3GA (blue Sepharose CL-6B) and Procion red HE3B (Matrex gel red A) as matrices and general ligand chromatography employing immobilized 2',5'-ADP (2',5'-ADP-Sepharose 4B) and immobilized 3',5'-ADP (3',5'-ADP-Agarose) were employed for purification of NADPH-dependent 2-enoyl-CoA reductase and 2,4-dienoyl-CoA reductase from bovine liver (formerly called 4-enoyl-CoA reductase [Kunau, W. H. and Dommes, P. (1978) Eur. J. Biochem. 91, 533-544], as well as 2,4-dienoyl-CoA reductase from Escherichia coli. 2. The NADPH-dependent 2-enoyl-CoA reductase from bovine liver mitochondria was separated from 2,4-dienoyl-CoA reductase by dye-ligand chromatography (Matrex gel red A/KCl gradient) as well as by general ligand affinity chromatography (2',5'-ADP-Sepharose 4B/NADP gradient). The enzyme was obtained in a highly purified form. 3. The NADPH-dependent 2,4-dienoyl-CoA reductase from bovine liver mitochondria was purified to homogeneity using blue Sepharose CL-6B, Matrex gel red A, and 2',5'-ADP-Sepharose 4B chromatography. 4. The bacterial 2,4-dienoyl-CoA reductase was completely purified by ion-exchange chromatography on DEAE-cellulose followed by a single affinity chromatography step employing 2',5'-ADP-Sepharose 4B and biospecific elution from the column with a substrate, trans,trans-2,4-decadienoyl-CoA. 5. The application of dye-ligand and general ligand affinity chromatography for purification of NADPH-dependent 2,4-dienoyl-CoA reductases taking part in the beta-oxidation of unsaturated fatty acids is discussed. It is concluded that making use of coenzyme specificity for binding and substrate specificity for elution is essential for obtaining homogeneous enzyme preparations.     

Beta-glycosylamidine as a ligand for affinity chromatography tailored to the glycon substrate specificity of beta-glycosidases

An affinity adsorbent for beta-glycosidases has been prepared by using beta-glycosylamidine as a ligand. beta-Glucosylamidine and beta-galactosylamidine, highly potent and selective inhibitors of beta-glucosidases and beta-galactosidases, respectively, were immobilized by a novel one-pot procedure involving the addition of a beta-glycosylamine and 2-iminothiolane.HCl simultaneously to a matrix modified with maleimido groups via an appropriate spacer to give an affinity adsorbent for beta-glucosidases and beta-galactosidases, respectively. This one-pot procedure enables various beta-glycosylamidine ligands to be formed and immobilized conveniently according to the glycon substrate specificities of the enzymes. A crude enzyme extract from tea leaves (Camellia sinensis) and a beta-galactosidase from Penicillium multicolor were chromatographed directly on each affinity adsorbent to give a beta-glucosidase and a beta-galactosidase to apparent homogeneity in one step by eluting the column with glucose or by a gradient NaCl elution, respectively. The beta-glucosidase and beta-galactosidase were inhibited competitively by a soluble form of the corresponding beta-glycosylamidine ligand with an inhibition constant (K(i)) of 2.1 and 0.80 microM, respectively. Neither enzyme was bound to the adsorbent with a mismatched ligand, indicating that the binding of the glycosidases was of specific nature that corresponds to the glycon substrate specificity of the enzymes. The ease of preparation and the selective nature of the affinity adsorbent should promise a large-scale preparation of the affinity adsorbent for the purification and removal of specific glycosidases according to their glycon substrate specificities.     

Integrated enzyme purification and immobilization processes with immobilized metal affinity adsorbents

Silica-based immobilized metal affinity chromatography adsorbents with various ligand densities were prepared for the purification and immobilization of poly(His)-tagged d-hydantoinase (DHTase). An adsorbent with a ligand density of 13.0 μmol Cu²⁺/g gel exhibiting the optimal selectivity and a capacity of 1.4 mg/g gel toward the poly(His)-tagged enzyme was identified. The adsorbent was used for the one-step purification of His-tagged enzymes from crude cell lysate with a purity above 90%. The silica-based affinity adsorbents are particularly well suited for industrial scale operations due to their robustness. A packed-bed bioreactor with the DHTase-loaded adsorbents was used for the continuous conversion of d,l-p-hydroxyphenylhydantoin (d,l-HPH) to N-carbamoyl-d-hydroxyphenylglycine, an intermediate for the production of d-hydroxylphenylglycine. Under optimal conditions, 60 °C and pH 8.0, a conversion of 60% was obtained at a residence time of 30 min. Upon extended operation, the catalytic activity of the biocatalysts declined significantly due to enzyme leakage and enzyme denaturation. The extent of enzyme leakage can be attenuated by crosslinking with glutaraldehyde. In this study, we successfully demonstrate that a packed-bed bioreactor containing silica-based IMAC adsorbents can be used for the direct purification and immobilization of poly(His)-tagged enzymes for biotransformation.     

Affinity purification of HIV-1 and HIV-2 proteases from recombinant E. coli strains using pepstatin-agarose

A procedure is described which employs pepstatin-agarose for the affinity purification of either HIV-1 or HIV-2 protease from two similar recombinant E. coli constructs that were developed for the expression of these enzymes. HIV-2 protease was routinely expressed at much higher levels than the HIV-1 enzyme and pepstatin-agarose was the only chromatography step required to isolate pure HIV-2 protease from crude bacterial lysates. A Mono S ionic exchange step following pepstatin-agarose chromatography was sufficient to bring the HIV-1 protease to homogeneity. Purification of either enzyme can be completed in several days yielding homogeneous preparations suitable for crystallization and other physical characterization.     

Rapid, high yield purification and characterization of the K(+)-translocating Kdp-ATPase from Escherichia coli.

The conventional procedure for the purification of the high affinity K+ uptake ATPase (KdpABC) from Escherichia coli involves a tedious three-column protocol (final enzyme purity, approximately 90%; activity yield, 6.5% (Siebers, A., and Altendorf, K. (1988) Eur. J. Biochem. 178, 131-140)). We have now developed a highly effective one-column (Fractogel TSK AF-Red) protocol yielding an enzyme preparation of comparable purity with severalfold higher activity yield. A further increase in enzyme purity up to 98% was achieved by a two-column protocol involving elution over DEAE-Sepharose CL-6B prior to TSK AF-Red affinity chromatography. The reduction of preparation time minimized KdpB protein degradation and led to hitherto unequaled values of specific activity (up to 2000 mumols x g-1 x min-1) and enrichment factors (up to 30-fold). Our results confirm the usefulness of triazine dye matrices for the purification of transport ATPases.     

Purification of the FLP site-specific recombinase by affinity chromatography and re-examination of basic properties of the system.

The FLP protein, a site-specific recombinase encoded by the 2 micron plasmid of yeast, has been purified to near homogeneity from extracts of E. coli cells in which the protein has been expressed. The purification is a three column procedure, the final step employing affinity chromatography. The affinity ligand consists of a DNA polymer with multiple FLP protein binding sites arranged in tandem repeats. This protocol yields 2 mg of FLP protein which is 85% pure. The purified protein is highly active, stable for several months at -70 degrees C and free of detectable nucleases. The molecular weight and N-terminal sequence are identical to that predicted for the FLP protein by the DNA sequence of the gene. Purified FLP protein primarily, but not exclusively, promotes intramolecular recombination. Intermolecular recombination becomes the dominant reaction when E. coli extracts containing no FLP protein are added to the reaction mixture. These extracts are not specifically required for recombination, but demonstrate that some properties previously attributed to FLP protein can be assigned to contaminating proteins present in E. coli.     

Simultaneous purification of L-malate dehydrogenase and L-lactate dehydrogenase from bovine heart by biomimetic-dye affinity chromatography

Two commercially important enzymes, L-lactate dehydrogenase (LDH) and L-malate dehydrogenase (MDH) were purified simultaneously from bovine heart, on an agarose affinity adsorbent. This adsorbent bears a dye-ligand composed of an anthraquinone chlorotriazine chromophore linked to a biomimetic terminal 4-aminophenyloxanylic acid moiety. The purification protocol exploited the biomimetic affinity adsorbent, in combination with a cross-linked agarose DEAE anion-exchanger. The procedure comprised a preliminary anion-exchange first step, for the separation of the three enzyme activities, mMDH, cMDH and LDH. In the second step, that of affinity chromatography, the unbound mMDH obtained from the first step, was purified by specific elution with NAD⁺/sulphite (22.5-fold purification, 55% step-yield). The procedure afforded mMDH preparation of specific activity approx. 1,300?u/mg (25?°C) at 45% overall yield, free of cytoplasmic MDH, glutamic-oxaloacetic transaminase (GOT) and fumarase. The LDH activity, which, bound to the anion-exchanger during the first step, was recovered from the adsorbent in 200?mM KCl, and finally purified by biomimetic-dye affinity chromatography (NAD⁺/sulphite elution) and a second ion-exchange chromatography step (elution with 200?mM KCl). The LDH preparation exhibited specific activity approx. 500?u/mg at 25?°C (content of impurities: pyruvate kinase and GOT were not detected; MDH, 0.01%).     

Activity assay of His-tagged E. coli DNA photolyase by RP-HPLC and SE-HPLC

Escherichia coli DNA photolyase was expressed as C-terminal 6x histidine-fused protein. Purification of His-tagged E. coli DNA photolyase was developed using immobilized metal affinity chromatography with Chelating Sepharose Fast Flow. By one-step affinity chromatography, approximate 4.6 mg DNA photolyase was obtained from 400 ml E. coli culture. The purified His-tagged enzyme was combined with two chromophors, FADH and MTHF. Using the oligonucleotide containing cyclobutane pyrimidine dimer as substrate, both reversed-phase high-performance liquid chromatography and size-exclusion high-performance liquid chromatography were developed to measure the enzyme activity. The enzyme was found to be able to repair the cyclobutane pyrimidine dimer with the turnover rate of 2.4 dimers/photolyase molecule/min.