Archaeal histone tetramerization determines DNA affinity and the direction of DNA supercoiling

DNA binding and the topology of DNA have been determined in complexes formed by >20 archaeal histone variants and archaeal histone dimer fusions with residue replacements at sites responsible for histone fold dimer:dimer interactions. Almost all of these variants have decreased affinity for DNA. They have also lost the flexibility of the wild type archaeal histones to wrap DNA into a negative or positive supercoil depending on the salt environment; they wrap DNA into positive supercoils under all salt conditions. The histone folds of the archaeal histones, HMfA and HMfB, from Methanothermus fervidus are almost identical, but (HMfA)(2) and (HMfB)(2) homodimers assemble into tetramers with sequence-dependent differences in DNA affinity. By construction and mutagenesis of HMfA+HMfB and HMfB+HMfA histone dimer fusions, the structure formed at the histone dimer:dimer interface within an archaeal histone tetramer has been shown to determine this difference in DNA affinity. Therefore, by regulating the assembly of different archaeal histone dimers into tetramers that have different sequence affinities, the assembly of archaeal histone-DNA complexes could be localized and used to regulate gene expression.     

Both DNA and histone fold sequences contribute to archaeal nucleosome stability.

The roles and interdependence of DNA sequence and archaeal histone fold structure in determining archaeal nucleosome stability and positioning have been determined and quantitated. The presence of four tandem copies of TTTAAAGCCG in the polylinker region of pLITMUS28 resulted in a DNA molecule with increased affinity (DeltaDeltaG of approximately 700 cal mol(-1)) for the archaeal histone HMfB relative to the polylinker sequence, and the dominant, quantitative contribution of the helical repeats of the dinucleotide TA to this increased affinity has been established. The rotational and translational positioning of archaeal nucleosomes assembled on the (TTTAAAGCCG)(4) sequence and on DNA molecules selectively incorporated into archaeal nucleosomes by HMfB have been determined. Alternating A/T- and G/C-rich regions were located where the minor and major grooves, respectively, sequentially faced the archaeal nucleosome core, and identical positioning results were obtained using HMfA, a closely related archaeal histone also from Methanothermus fervidus. However, HMfA did not have similarly high affinities for the HMfB-selected DNA molecules, and domain-swap experiments have shown that this difference in affinity is determined by residue differences in the C-terminal region of alpha-helix 3 of the histone fold, a region that is not expected to directly interact with DNA. Rather this region is thought to participate in forming the histone dimer:dimer interface at the center of an archaeal nucleosome histone tetramer core. If differences in this interface do result in archaeal histone cores with different sequence preferences, then the assembly of alternative archaeal nucleosome tetramer cores could provide an unanticipated and novel structural mechanism to regulate gene expression.     

Structure based hyperthermostability of archaeal histone HPhA from Pyrococcus horikoshii

The histone protein HPhA from the hyperthermophilic archaeon Pyrococcus horikoshii, shows hyperthermostability, as required for optimal growth of the organism at 95 degrees C. The structure of recombinant P.horikoshii HPhA has been determined to 2.3A resolution by molecular replacement, and refined to R(work) and R(free) values of 20.7% and 27.3%, respectively. The HPhA monomer structure is characterized by the histone fold and assembles into a homodimer like other archaeal histones. There are four anions found in the dimer structure, giving rise to clues as to where DNA might bind. A detailed comparison of four known structures of archaeal histones, which evolve and exist under different temperatures, shows that the thermophilic archaeal histone HPhA has a larger hydrophobic contact area, an increased number of hydrogen bonds and a reduced solvent-accessible area. We also observe a unique network of tyrosine residues located at the crossover point of the two HPhA monomers, which locks them together and stabilizes the dimer. These factors together account for the increased thermal stability.     

Histone stoichiometry and DNA circularization in archaeal nucleosomes.

Recombinant (r)HMfB (archaealhistone B fromMethanothermusfervidus) formed complexes with increasing stability with DNA molecules increasing in length from 52 to 100 bp, but not with a 39 bp molecule. By using125I-labeled rHMfB-YY (an rHMfB variant with I31Y and M35Y replacements) and32P-labeled 100 bp DNA, these complexes, designated archaeal nucleosomes, have been shown to contain an archaeal histone tetramer. Consistent with DNA bending and wrapping, addition of DNA ligase to archaeal nucleosomes assembled with 88 and 128 bp DNAs resulted in covalently-closed monomeric circular DNAs which, following histone removal, were positively supercoiled based on their electrophoretic mobilities in the presence of ethidium bromide before and after relaxation by calf thymus topoisomerase I. Ligase addition to mixtures of rHMfB with 53 or 30 bp DNA molecules also resulted in circular DNAs but these were circular dimers and trimers. These short DNA molecules apparently had to be ligated into longer linear multimers for assembly into archaeal nucleosomes and ligation into circles. rHMfB assembled into archaeal nucleosomes at lower histone to DNA ratios with the supercoiled, circular ligation product than with the original 88 bp linear version of this molecule. Archaeal histones are most similar to the globular histone fold region of eukaryal histone H4, and the results reported are consistent with archaeal nucleosomes resembling the structure formed by eukaryal histone (H3+H4)2tetramers.     

Structural Basis for Translation Factor Recruitment to the Eukaryotic/Archaeal Ribosomes

The archaeal ribosomal stalk complex has been shown to have an apparently conserved functional structure with eukaryotic pentameric stalk complex; it provides access to eukaryotic elongation factors at levels comparable to that of the eukaryotic stalk. The crystal structure of the archaeal heptameric (P0(P1)₂(P1)₂(P1)₂) stalk complex shows that the rRNA anchor protein P0 consists of an N-terminal rRNA-anchoring domain followed by three separated spine helices on which three P1 dimers bind. Based on the structure, we have generated P0 mutants depleted of any binding site(s) for P1 dimer(s). Factor-dependent GTPase assay of such mutants suggested that the first P1 dimer has higher activity than the others. Furthermore, we constructed a model of the archaeal 50 S with stalk complex by superposing the rRNA-anchoring domain of P0 on the archaeal 50 S. This model indicates that the C termini of P1 dimers where translation factors bind are all localized to the region between the stalk base of the 50 S and P0 spine helices. Together with the mutational experiments we infer that the functional significance of multiple copies of P1 is in creating a factor pool within a limited space near the stalk base of the ribosome.     

Histone dimers: a fundamental unit in histone assembly.

Histone interactions which occur, at moderate ionic strengths, when several types of purified, renatured histones are mixed at equimolar ratios have been studied. The four histones H2A,H2B,H3 and H4 complex and form dimers. Histone H1 does not interact with the other four histone types and does not form dimers. Mixing of single histone species with preformed histone pairs as well as mixing of two different types of histone pairs, leads to exchange of histones among the pairs and formation of dimers. No trimers are formed. The dimers are in equilibrium with high-molecular weight histone structures. The results indicate that histone dimers may serve as a stable intermediate in histone assembly. Because each histone type (except H1) can interact with itself as well as with each of the other three histone types we suggest that each histone type should be considered as an interchangeable subunit of a multichain protein in which the dimer species is the most stable structure.     

Three binding sites for stalk protein dimers are generally present in ribosomes from archaeal organism

Ribosomes have a characteristic protuberance termed the stalk, which is indispensable for ribosomal function. The ribosomal stalk has long been believed to be a pentameric protein complex composed of two sets of protein dimers, L12-L12, bound to a single anchor protein, although ribosomes carrying three L12 dimers were recently discovered in a few thermophilic bacteria. Here we have characterized the stalk complex from Pyrococcus horikoshii, a thermophilic species of Archaea. This complex is known to be composed of proteins homologous to eukaryotic counterparts rather than bacterial ones. In truncation experiments of the C-terminal regions of the anchor protein Ph-P0, we surprisingly observed three Ph-L12 dimers bound to the C-terminal half of Ph-P0, and the binding site for the third dimer was unique to the archaeal homologs. The stoichiometry of the heptameric complex Ph-P0(Ph-L12)(2)(Ph-L12)(2)(Ph-L12)(2) was confirmed by mass spectrometry of the intact complex. In functional tests, ribosomes carrying a single Ph-L12 dimer had significant activity, but the addition of the second and third dimers increased the activity. A bioinformatics analysis revealed the evidence that ribosomes from all archaeal and also from many bacterial organisms may contain a heptameric complex at the stalk, whereas eukaryotic ribosomes seem to contain exclusively a pentameric stalk complex, thus modifying our view of the stalk structure significantly.     

Asymmetry and polarity of nucleosomes in chicken erythrocyte chromatin.

Nucleosome dimers containing, on average, a single molecule of histone H5 have been isolated from chicken erythrocyte nuclei and the associated DNA fragments cloned and sequenced. The average sequence organization of at least one of the two nucleosomes in the dimers is highly asymmetric and suggests that the torsional, as well as the axial, flexibility of DNA is a determinant of nucleosome positioning. On average the nucleosome dimer is a polar structure containing linker DNA of variable lengths. The sequences associated with H5 containing nucleosomes and core particles are sufficiently different to indicate that removal of histone H5 (or H1) from chromatin may result in the migration of the histone octamer and a consequent exposure of sites for regulatory proteins.     

Large Multimeric Assemblies of Nucleosome Assembly Protein and Histones Revealed by Small-angle X-ray Scattering and Electron Microscopy

The nucleosome assembly protein (NAP) family represents a key group of histone chaperones that are essential for cell viability. Several x-ray structures of NAP1 dimers are available; however, there are currently no structures of this ubiquitous chaperone in complex with histones. We have characterized NAP1 from Xenopus laevis and reveal that it forms discrete multimers with histones H2A/H2B and H3/H4 at a stoichiometry of one NAP dimer to one histone fold dimer. These complexes have been characterized by size exclusion chromatography, analytical ultracentrifugation, multiangle laser light scattering, and small-angle x-ray scattering to reveal their oligomeric assembly states in solution. By employing single-particle cryo-electron microscopy, we visualized these complexes for the first time and show that they form heterogeneous ring-like structures, potentially acting as large scaffolds for histone assembly and exchange.     

Equilibrium folding of the core histones: the H3-H4 tetramer is less stable than the H2A-H2B dimer

To compare the stability of structurally related dimers and to aid in understanding the thermodynamics of nucleosome assembly, the equilibrium stabilities of the recombinant wild-type H3-H4 tetramer and H2A-H2B dimer have been determined by guanidinium-induced denaturation, using fluorescence and circular dichroism spectroscopies. The unfolding of the tetramer and dimer are highly reversible. The unfolding of the H2A-H2B dimer is a two-state process, with no detected equilibrium intermediates. The H3-H4 tetramer is unstable at moderate ionic strengths (mu approximately 0.2 M). TMAO (trimethylamine-N-oxide) was used to stabilize the tetramer; the stability of the H2A-H2B dimer was determined under the same solvent conditions. The equilibrium unfolding of H3-H4 was best described by a three-state mechanism, with well-folded H3-H4 dimers as a populated intermediate. When compared to H2A-H2B, the H3-H3 tetramer interface and the H3-H4 histone fold are strikingly less stable. The free energy of unfolding, in the absence of denaturant, for the H3-H4 and H2A-H2B dimers are 12.4 and 21.0 kcal mol(-)(1), respectively, in 1 M TMAO. It is postulated that the difference in stability between the histone dimers, which contain the same fold, is the result of unfavorable tertiary interactions, most likely the partial to complete burial of three salt bridges and burial of a charged hydrogen bond. Given the conservation of these buried interactions in histones from yeast to mammals, it is speculated that the H3-H4 tetramer has evolved to be unstable, and this instability may relate to its role in nucleosome dynamics.     

A thermodynamic model for Nap1-histone interactions

The yeast nucleosome assembly protein 1 (yNap1) plays a role in chromatin maintenance by facilitating histone exchange as well as nucleosome assembly and disassembly. It has been suggested that yNap1 carries out these functions by regulating the concentration of free histones. Therefore, a quantitative understanding of yNap1-histone interactions also provides information on the thermodynamics of chromatin. We have developed quantitative methods to study the affinity of yNap1 for histones. We show that yNap1 binds H2A/H2B and H3/H4 histone complexes with low nm affinity, and that each yNap1 dimer binds two histone fold dimers. The yNap1 tails contribute synergistically to histone binding while the histone tails have a slightly repressive effect on binding. The (H3/H4)(2) tetramer binds DNA with higher affinity than it binds yNap1.     

Nucleosome assembly protein 1 exchanges histone H2A-H2B dimers and assists nucleosome sliding

Eukaryotic chromatin is highly dynamic and turns over rapidly even in the absence of DNA replication. Here we show that the acidic histone chaperone nucleosome assembly protein 1 (NAP-1) from yeast reversibly removes and replaces histone protein dimer H2A-H2B or histone variant dimers from assembled nucleosomes, resulting in active histone exchange. Transient removal of H2A-H2B dimers facilitates nucleosome sliding along the DNA to a thermodynamically favorable position. Histone exchange as well as nucleosome sliding is independent of ATP and relies on the presence of the C-terminal acidic domain of yeast NAP-1, even though this region is not required for histone binding and chromatin assembly. Our results suggest a novel role for NAP-1 (and perhaps other acidic histone chaperones) in mediating chromatin fluidity by incorporating histone variants and assisting nucleosome sliding. NAP-1 may function either untargeted (if acting alone) or may be targeted to specific regions within the genome through interactions with additional factors.     

Analysis of the dynamic equilibrium of histone oligomers in a solution. The nature of forces stabilizing the (H2A-H2B-H3-H4)2 octamer structure

Dynamic equilibrium analysis of the (H2A-H2B-H3-H4)2 histone octamer with lower oligomers was performed in 2 M NaCl. Calculated data on the relative content of histone oligomers upon changing protein concentration in solution are given. The red shift of lambda max for histone tyrosine fluorescence spectra is shown to be due to hydrogen bond formation by tyrosyl OH-groups. Analysis of free energy changes of histone oligomers upon association (delta G = -17,37 +/- 0,14 kcal/mole) as well as the effect of urea on histone octamer dissociation made it possible to conclude that virtually all tyrosyls in octamer form hydrogen bonds. Intermolecular hydrogen bonds formed by tyrosyls contribute substantially to octamer stabilization. The (H2A-H2B) dimer positive cooperativity in association with the (H3-H4)2 tetramer was found. This cooperativity is caused by interaction between association sites with a two order increase in an apparent constant of dimers with tetramer association. The histone octamer was determined to be of asymmetric structure due to unequivolency of the two binding sites for the (H2A-H2B) dimers.     

Histones and nucleosomes in Archaea and Eukarya: a comparative analysis

Archaeal histones from mesophilic, thermophilic, and hyperthermophilic members of the Euryarchaeota have primary sequences, the histone fold, tertiary structures, and dimer formation in common with the eukaryal nucleosome core histones H2A, H2B, H3, and H4. Archaeal histones form nucleoprotein complexes in vitro and in vivo, designated archaeal nucleosomes, that contain histone tetramers and protect approximately 60 base pairs of DNA from nuclease digestion. Based on the sequence and structural homologies and experimental data reviewed here, archaeal nucleosomes appear similar, and may be homologous in evolutionary terms and function, to the structure at the center of the eukaryal nucleosome formed by the histone (H3+H4)₂ tetramer. Received: January 22, 1998 / Accepted: February 16, 1998     

A beta-hairpin comprising the nuclear localization sequence sustains the self-associated states of nucleosome assembly protein 1

The histone chaperone nucleosome assembly protein 1 (NAP1) is implicated in histone shuttling as well as nucleosome assembly and disassembly. Under physiological conditions, NAP1 dimers exist in a mixture of various high-molecular-weight oligomers whose size may be regulated by the cell cycle-dependent concentration of NAP1. Both the functional and structural significance of the observed oligomers are unknown. We have resolved the molecular mechanism by which yeast NAP1 (yNAP1) dimers oligomerize by applying x-ray crystallographic, hydrodynamic, and functional approaches. We found that an extended β-hairpin that protrudes from the compact core of the yNAP1 dimer forms a stable β-sheet with β-hairpins of neighboring yNAP1 dimers. Disruption of the β-hairpin (whose sequence is conserved among NAP1 proteins in various species) by the replacement of one or more amino acids with proline results in complete loss of yNAP1 dimer oligomerization. The in vitro functions of yNAP1 remain unaffected by the mutations. We have thus identified a conserved structural feature of NAP1 whose function, in addition to presenting the nuclear localization sequence, appears to be the formation of higher-order oligomers.     

The Hydrophobicity of the H3 Histone Fold differs from the Hydrophobicity of the other three Folds

The eukaryotic histone dimers, H3–H4 and H2A–H2B, are formed in the cytosol prior to being transported into the nucleus and assembled into the nucleosome. Residue side-chain distances from the interior of the histone dimers are obtained with an ellipsoidal spatial metric and structural information provided by X-ray analyses at atomic resolution of the nucleosome core particles. While the spatial hydrophobic moment profiles of the dimers are comparable with profiles obtained previously that characterize the hydrophobic core of single-chain, single-domain globular soluble proteins, correlation coefficients between the side-chain hydrophobicities and distances from the interior of the H3–H4 dimer and H2A–H2B dimer differ significantly. This difference is traced to the H3 histone fold, which segregates fewer hydrophobic residues within the protein interior than the three other folds. Examination of the correlation coefficient between residue hydrophobicity and side-chain distance from the dimer interior over local regions of the fold sequence shows that the region of reduced correlation is associated mainly with the residues at the carboxyl end of the H3 histone fold, the helical region of the fold involved in the H3–H3 binding of the (H3–H4)₂ tetramer of the nucleosome. Hydrophobic interactions apparently contribute to the binding of this fourfold helical bundle and this evolutionary requirement may trade off against the requirement for H3–H4 dimer stability. The present results provide a different view than previously proposed, albeit of similar origin, to account for the reduced stability of the H3–H4 dimer compared with the H2A–H2B dimer.Reviewing Editor: Dr. Martin Kreitman     

Histone interactions in solution and susceptibility to denaturation.

Histone interactions in solution may depend upon treatments used for purification. Optical rotatory dispersion and sedimentation-velocity measurements have been made in a reference solvent, before and after exposure to various treatments, to investigate histone susceptibility to irreversible denaturation. Some acid conditions and urea and guanidine solutions may denature. Interaction studies performed on nondenatured histones indicate that the dimer, (H4)(H3), and tetramer, (H4)2(H3)2, dissociate to monomers at low ionic strength. Sedimentation-velocity experiments suggest a model for the (H4)2(H3)2 tetramer, with a compact semispherical center and four protruding amino-terminal regions. Fractions H2a and H2b interact to form the mixed dimer in equilibrium with monomers. Fraction H2a self-associates readily to dimers, tetramers, and octamers, while fraction H1 associates only weakly to form dimers.     

The N-terminal tails of the H2A-H2B histones affect dimer structure and stability

The histone proteins of the core nucleosome are highly basic and form heterodimers in a "handshake motif." The N-terminal tails of the histones extend beyond the canonical histone fold of the hand-shake motif and are the sites of posttranslational modifications, including lysine acetylations and serine phosphorylations, which influence chromatin structure and activity as well as alter the charge state of the tails. However, it is not well understood if these modifications are signals for recruitment of other cellular factors or if the removal of net positive charge from the N-terminal tail plays a role in the overall structure of chromatin. To elucidate the effects of the N-terminal tails on the structure and stability of histones, the highly charged N-terminal tails were truncated from the H2A and H2B histones. Three mutant dimers were studied: DeltaN-H2A/WT H2B; WT H2A/DeltaN-H2B, and DeltaN-H2A/DeltaN-H2B. The CD spectra, stabilities to urea-denaturation, and the salt-dependent stabilization of the three truncated dimers were compared with those of the wild-type dimer. The data support four conclusions regarding the effects of the N-terminal tails of H2A and H2B: (1) Removal of the N-terminal tails of H2A and H2B enhance the helical structure of the mutant heterodimers. (2) Relative to the full-length WT heterodimer, the DeltaN-H2A/WT H2B dimer is destabilized, while the WT H2A/DeltaN-H2B and DeltaN-H2A/DeltaN-H2B dimers are slightly stabilized. (3) The truncated dimers exhibit decreased m values, relative to the WT dimer, supporting the hypothesis that the N-terminal tails in the isolated dimer adopt a collapsed structure. (4) Electrostatic repulsion in the N-terminal tails decreases the stability of the H2A-H2B dimer.