Hemocyanins in spiders, XX. Sulfhydryl groups and disulfide bridges in subunit d of Eurypelma californicum hemocyanin

Subunit d of Eurypelma californicum hemocyanin contains after reduction 7 cysteine residues. Using 3,3'-dithiobis(6-nitrobenzoic acid) 3 mol cysteine/mol subunit were determined. The cysteine- and cystine-containing peptides of subunit d were obtained by cyanogen bromide cleavage and subsequent treatment with trypsin. The free cysteines were established at positions 102, 261, and 454 respectively. Cys205-Cys210 and Cys529-Cys579 are connected by disulfide bridges.     

Assignment of the disulfide bonds in the sweet protein brazzein

The thermostable sweet protein brazzein consists of 54 amino acid residues and has four intramolecular disulfide bonds, the location of which is unknown. We found that brazzein resists enzymatic hydrolysis at enzyme/substrate ratios (w/w) of 1:100-1:10 at 35–40°C for 24–48 h. Brazzein was hydrolyzed using thermolysin at an enzyme/substrate ratio of 1:1 (w/w) in water, pH 5.5. for 6 h and at 50°C. The disulfide bonds were determined, by a combination of mass spectrometric analysis and amino acid sequencing of cystine-containing peptides, to be between Cys4-Cys52, Cys16-Cys37, Cys22-Cys47, and Cys26-Cys49. These disulfide bonds contribute to its thermostability. © 1996 John Wiley & Sons, Inc.     

The disulfide bridges of the trypsin-kallikrein inhibitor K from snails (Helix pomatia). Thermal inactivation and proteolysis by thermolysin (author's transl)]

Isoinhibitor K is the main component of the complex mixture of isoinhibitors of broad specificity secreted into the mucus by the Roman snail (Helix pomatia). The disulfide pairing was determined after the amino acid sequence had been elucidated. Two cystine-containing peptides with the disulfide bridges Cys32-Cys53 and Cys32-Cys53 plus Cys7-Cys57 were obtained after thermolytic hydrolysis of the native inhibitor at 80 degrees C and chromatographic separation of the peptides using SE-Sephadex. The Cys16-Cys40 disulfide bridge could be reduced selectively by sodium borohydride with no loss in biological activity. This property and the covalent structure correspond to that of the intracellular inhibitor from bovine organs, which is largely homologous in its amino acid sequence to the secretory inhibitor from the snail. The complete covalent structure of isoinhibitor K will be presented. The snail inhibitor is less stable against proteolytic inactivation by thermolysin and against thermal denaturation at pH 8.0 than the inhibitor from bovine organs (Kunitz inhibitor).     

Characterization of a recombinant murine interleukin-6: assignment of disulfide bonds

Murine interleukin 6 (mIL-6) has been synthesized as a fusion protein using a lac operon inducible plasmid in Escherichia coli. The first 8 amino acids are from the N-terminus of bacterial beta-galactosidase and the last 175 amino acids are from residue number 12 to the end of native mIL-6. This fusion protein is equipotent with the native molecule in the hybridoma growth factor assay and has comparable receptor binding characteristics. The two disulfide bridges in mIL-6 have been identified by Staphylococcus aureus V8 protease peptide mapping and Edman degradation of cystine-containing peptides. It has been shown that there are disulfide bonds between Cys46-Cys52 and Cys75-Cys85.     

A comparison of folding techniques in the chemical synthesis of the epidermal growth factor-like domain in neu differentiation factor alpha/beta.

The 52-residue alpha/beta chimera of the epidermal growth factor-like domain in neu differentiation factor (NDFealpha/beta) has been synthesized and folded to form a three disulfide bridge (Cys182-Cys196, Cys190-Cys210, Cys212-Cys221) containing peptide. We investigated two general strategies for the formation of the intramolecular disulfide bridges including, the single-step approach, which used fully deprotected and reduced peptide, and a sequential approach that relied on orthogonal cysteine protection in which specific pairs are excluded from the first oxidation step. Because there are 15 possible disulfide bridge arrangements in a peptide with six cysteines, the one-step approach may not always provide the desired disulfide pairing. Here, we compare the single-step approach with a systematic evaluation of the sequential approach. We employed the acetamidomethyl group to protect each pair of cysteines involved in disulfide bridges, i.e. Cys182 to Cys196, Cys190 to Cys210 and Cys212 to Cys221. This reduced the number of possible disulfide patterns from 15 to three in the first folding step. We compared the efficiencies of folding for each protected pair using RP-HPLC, mapped the disulfide connectivity of the predominant product and then formed the final disulfide from the partially folded intermediate via 12 oxidation. Only the peptide having the Cys182-Cys196 pair blocked with acetamidomethyl forms the desired disulfide isomer (Cys190-Cys210/Cys212-Cys221) as a single homogeneous product. By optimizing both approaches, as well as other steps in the synthesis, we can now rapidly provide large-scale syntheses of NDFealpha/beta and other novel EGF-like peptides.     

Amino acid sequence and carbohydrate-binding analysis of the N-acetyl-D-galactosamine-specific C-type lectin, CEL-I, from the Holothuroidea, Cucumaria echinata

CEL-I is one of the Ca2+-dependent lectins that has been isolated from the sea cucumber, Cucumaria echinata. This protein is composed of two identical subunits held by a single disulfide bond. The complete amino acid sequence of CEL-I was determined by sequencing the peptides produced by proteolytic fragmentation of S-pyridylethylated CEL-I. A subunit of CEL-I is composed of 140 amino acid residues. Two intrachain (Cys3-Cys14 and Cys31-Cys135) and one interchain (Cys36) disulfide bonds were also identified from an analysis of the cystine-containing peptides obtained from the intact protein. The similarity between the sequence of CEL-I and that of other C-type lectins was low, while the C-terminal region, including the putative Ca2+ and carbohydrate-binding sites, was relatively well conserved. When the carbohydrate-binding activity was examined by a solid-phase microplate assay, CEL-I showed much higher affinity for N-acetyl-D-galactosamine than for other galactose-related carbohydrates. The association constant of CEL-I for p-nitrophenyl N-acetyl-beta-D-galactosaminide (NP-GalNAc) was determined to be 2.3 x 10(4) M(-1), and the maximum number of bound NP-GalNAc was estimated to be 1.6 by an equilibrium dialysis experiment.     

Assignment of the Disulfide Bridges in Bothropstoxin-I, a Myonecrotic Lys49 PLA2 Homolog from Bothrops jararacussu Snake Venom

Bothropstoxin-I (BthTX-I), a Lys49 phospholipase A₂ homolog with no apparent catalytic activity, was first isolated from Bothrops jararacussu snake venom and completely sequenced in this laboratory. It is a 121-amino-acid single polypeptide chain, highly myonecrotic, despite its inability to catalyze hydrolysis of egg yolk phospholipids, and has 14 half-cystine residues identified at positions 27, 29, 44, 45, 50, 51, 61, 84, 91, 96, 98, 105, 123, and 131 (numbering according to the conventional alignment including gaps, so that the last residue is Cys 131). In order to access its seven disulfide bridges, two strategies were followed: (1) Sequencing of isolated peptides from (tryptic + SV₈) and chymotryptic digests by Edman-dansyl degradation; (2) crystallization of the protein and determination of the crystal structure so that at least two additional disulfide bridges could be identified in the final electron density map. Identification of the disulfide-containing peptides from the enzymatic digests was achieved following the disappearance of the original peptides from the HPLC profile after reduction and carboxymethylation of the digest. Following this procedure, four bridges were initially identified from the tryptic and SV₈ digests: Cys50-Cys131, Cys51-Cys98, Cys61-Cys91, and Cys84-Cys96. From the chymotryptic digest other peptides were isolated either containing some of the above bridges, therefore confirming the results from the tryptic digest, or presenting a new bond between Cys27 and Cys123. The two remaining bridges were identified as Cys29-Cys45 and Cys44-Cys105 by determination of the crystal structure, showing that BthTX-I disulfide bonds follow the normal pattern of group II PLA₂s.     

Disulfide structures of human interleukin-6 are similar to those of human granulocyte colony stimulating factor

The amino acid sequences of human interleukin-6 and granulocyte colony stimulating factor are approximately 30% homologous in the N-terminal region. The relative positions of four half-cystines in human interleukin-6 (IL-6) match four of the five in human granulocyte colony stimulating factor. Labeling experiments of recombinant interleukin-6 with tritiated iodoacetate confirmed that the molecule forms two intramolecular disulfide bonds and contains no detectable level of free sulfhydryls. By isolation and characterization of tryptic and subtilytic peptides obtained from different proteolytic digestions, the disulfide bonds of the IL-6 molecule were assigned to Cys44-Cys50 and Cys73-Cys83. The two disulfide bridges form two small loops which are separated by 22 amino acids. These structures are similar to those of recombinant granulocyte colony stimulating factor.     

Amino acid sequence of protein alpha-amylase inhibitor from Streptomyces griseosporeus YM-25

The amino acid sequence of a protein alpha-amylase inhibitor from Streptomyces griseosporeus YM-25 (Haim II), which consists of 77 amino acid residues, including two disulfide bridges, was determined by conventional methods. One of the disulfide bridges was found to be located between Cys(6) and Cys(22), and the other between Cys(40) and Cys(67) from the results of structure analyses of the two cystine-containing peptides obtained from the thermolysin digest of the native inhibitor.     

Human acid sphingomyelinase.

Human acid sphingomyelinase (haSMase, EC 3.1.4.12) catalyzes the lysosomal degradation of sphingomyelin to ceramide and phosphorylcholine. An inherited haSMase deficiency leads to Niemann-Pick disease, a severe sphingolipid storage disorder. The enzyme was purified and cloned over 10 years ago. Since then, only a few structural properties of haSMase have been elucidated. For understanding of its complex functions including its role in certain signaling and apoptosis events, complete structural information about the enzyme is necessary. Here, the identification of the disulfide bond pattern of haSMase is reported for the first time. Functional recombinant enzyme expressed in SF21 cells using the baculovirus expression system was purified and digested by trypsin. MALDI-MS analysis of the resulting peptides revealed the four disulfide bonds Cys120-Cys131, Cys385-Cys431, Cys584-Cys588 and Cys594-Cys607. Two additional disulfide bonds (Cys221-Cys226 and Cys227-Cys250) which were not directly accessible by tryptic cleavage, were identified by a combination of a method of partial reduction and MALDI-PSD analysis. In the sphingolipid activator protein (SAP)-homologous N-terminal domain of haSMase, one disulfide bond was assigned as Cys120-Cys131. The existence of two additional disulfide bridges in this region was proved, as was expected for the known disulfide bond pattern of SAP-type domains. These results support the hypothesis that haSMase possesses an intramolecular SAP-type activator domain as predicted by sequence comparison [Ponting, C.P. (1994) Protein Sci., 3, 359-361]. An additional analysis of haSMase isolated from human placenta shows that the recombinant and the native human protein possess an identical disulfide structure.     

Disulfide bonds in neurotoxin-III from the sea anenome Radianthus macrodactylus

Positions of the three disulfide bridges in neurotoxin-III (RTX-III) from sea anemone Radianthus macrodactylus were determined: Cys3--Cys43, Cys5--Cys33, Cys26--Cys44. The cystine-containing peptides obtained by the staphylococcal proteinase/trypsin digestion of the intact RTX-III were investigated.     

Selectivity of tryptophan residues in mediating photolysis of disulfide bridges in goat alpha-lactalbumin

Goat alpha-lactalbumin (GLA) contains four tryptophan (Trp) residues and four disulfide bonds. Illumination with near-UV light results in the cleavage of disulfide bridges and in the formation of free thiols. To obtain information about the reaction products, the illuminated protein was carbamidomethylated and digested with trypsin and the peptides were analyzed by mass spectrometry. Peptides containing Cys120Cam, Cys61Cam, or Cys91Cam were detected, as well as two peptides containing a new Cys-Lys cross-link. In one, Cys6 was cross-linked to Lys122, while the cross-link in the second was either a Cys91-Lys79 or Cys73-Lys93 cross-link; however, the exact linkage could not be defined. The results demonstrate photolytic cleavage of the Cys6-Cys120, Cys61-Cys77, and Cys73-Cys91 disulfide bonds. While photolysis of Cys6-Cys120 and Cys73-Cys91 disulfide bonds in GLA has been reported, cleavage of the Cys61-Cys77 disulfide bonds has not been previously detected. To examine the contribution of the individual Trp residues, we constructed the GLA mutants, W26F, W60F, W104F, and W118F, by replacing single Trp residues with phenylalanine (Phe). The substitution of each Trp residue led to less thiol production compared to that for wild-type GLA, showing that each Trp residue in GLA contributed to the photolytic cleavage of disulfide bridges. The specificity was expressed by the nature of the reaction products. No cleavage of the Cys6-Cys120 disulfide bridge was detected when the W26F mutant was illuminated, and no cleavage of the Cys73-Cys91 disulfide bridge was seen following illumination of W26F or W104F. In contrast, Cys61Cam, resulting from the cleavage of the Cys61-Cys77 disulfide bridge, was found following illumination of any of the mutants.     

Attempt to map the receptor binding sites of human follicle-stimulating hormone using disulfide peptides of its beta-subunit indicates major involvement of the regions around disulfide bonds Cys28-Cys82 and Cys32-Cys84 in receptor binding of the hormone.

Follicle-stimulating hormone (FSH) is a heterodimeric glycoprotein hormone secreted by the anterior pituitary. It plays a very important role in folliculogenesis in females and is responsible for spermatogenesis in males. The alpha-subunit which is common within a species and the beta-subunit which is hormone-specific are held together by noncovalent association. This association is very essential for the biological activity of the hormone. Each of these subunits are highly cross-linked by disulfide bonds which appear to stabilize the tertiary structures required for the noncovalent association of the subunits to generate hormonal activity. This study was initiated to delineate the role of the disulfide bonds of hFSH beta in receptor binding of the hormone. Five intermolecular and one intramolecular disulfide peptides corresponding to the disulfide bonds found in hFSH beta were synthesized and screened along with their linear counterparts, for their ability to competitively inhibit the radiolabelled [125I]hFSH from binding to the FSH receptor containing membranes from the testis of immature rats. The disulfide peptides Cys28-Cys82 and Cys32-Cys84 were found to be the most potent in inhibiting radiolabelled hFSH from binding to its receptor. The results suggest the involvement of the regions around disulfide bonds Cys28-Cys82 and Cys32-Cys84 in receptor binding of the hormone. The studies also suggest the involvement of beta L2 and beta L3 loop regions in receptor binding of the hormone. This study is the first of its kind to use disulfide peptides rather than linear peptides to map the receptor binding regions of hFSH.     

Localization of carbohydrate attachment sites and disulfide bridges in limulus alpha 2-macroglobulin. Evidence for two forms differing primarily in their bait region sequences

The primary structure determination of the dimeric invertebrate alpha(2)-macroglobulin (alpha(2)M) from Limulus polyphemus has been completed by determining its sites of glycosylation and disulfide bridge pattern. Of seven potential glycosylation sites for N-linked glycosylation, six (Asn(275), Asn(307), Asn(866), Asn(896), Asn(1089), and Asn(1145)) carry common glucosamine-based carbohydrates groups, whereas one (Asn(80)) carries a carbohydrate chain containing both glucosamine and galactosamine. Nine disulfide bridges, which are homologues with bridges in human alpha(2)M, have been identified (Cys(228)-Cys(269), Cys(456)-Cys(580), Cys(612)-Cys(799), Cys(657)-Cys(707), Cys(849)-Cys(876), Cys(874)-Cys(910), Cys(946)-Cys(1328), Cys(1104)-Cys(1155), and Cys(1362)-Cys(1475)). In addition to these bridges, Limulus alpha(2)M contains three unique bridges that connect Cys(361) and Cys(382), Cys(1370) and Cys(1374), respectively, and Cys(719) in one subunit with the same residue in the other subunit of the dimer. The latter bridge forms the only interchain disulfide bridge in Limulus alpha(2)M. The location of this bridge within the bait region is discussed and compared with other alpha-macroglobulins. Several peptides identified in the course of determining the disulfide bridge pattern provided evidence for the existence of two forms of Limulus alpha(2)M. The two forms have a high degree of sequence identity, but they differ extensively in large parts of their bait regions suggesting that they have different inhibitory spectra. The two forms (Limulus alpha(2)M-1 and -2) are most likely present in an approximately 2:1 ratio in the hemolymph of each animal, and they can be partially separated on a Mono Q column at pH 7.4 by applying a shallow gradient of NaCl.     

Maurotoxin and the Kv1.1 channel: voltage-dependent binding upon enantiomerization of the scorpion toxin disulfide bridge Cys31-Cys34.

Maurotoxin (MTX) is a 34-amino acid polypeptide cross-linked by four disulfide bridges that has been isolated from the venom of the scorpion Scorpio maurus palmatus and characterized. Maurotoxin competed with radiolabeled apamin and kaliotoxin for binding to rat brain synaptosomes and blocked K+ currents from Kv1 channel subtypes expressed in Xenopus oocytes. Structural characterization of the synthetic toxin identified half-cystine pairings at Cys3-Cys24, Cys9-Cys29, Cys13-Cys19 and Cys31-Cys34 This disulfide bridge pattern is unique among known scorpion toxins, particularly the existence of a C-terminal '14-membered disulfide ring' (i.e. cyclic domain 31-34), We therefore studied structure-activity relationships by investigating the structure and pharmacological properties of synthetic MTX peptides either modified at the C-terminus ?i.e. MTX(1-29), [Abu31,34]-MTX and [Cys31,34, Tyr32]D-MTX) or mimicking the cyclic C-terminal domain [i.e. MTX(31-34)]. Unexpectedly, the absence of a disulfide bridge Cys31-Cys34 in [Abu 31,34]-MTX and MTX(1-29) resulted in MTX-unrelated half-cystine pairings of the three remaining disulfide bridges for the two analogs, which is likely to be responsible for their inactivity against Kv1 channel subtypes. Cyclic MTX(31-34) was also biologically inactive. [Cys31,34, Tyr32]D-MTX, which had a 'native', MTX-related, disulfide bridge organization, but a D-residue-induced reorientation of the C-terminal disulfide bridge, was potent at blocking the Kv1.1 channel. This peptide-induced Kv1.1 blockage was voltage-dependent (a property not observed for MTX), maximal in the low depolarization range and associated with on-rate changes in ligand binding. Thus, the cyclic C-terminal domain of MTX seems to be crucial for recognition of Kv1.3, and to a lesser extent, Kv1.2 channels and it may contribute to the stabilization and strength of the interaction between the toxin and the Kv1.1 channel.     

Solution structure of the recombinant penaeidin-3, a shrimp antimicrobial peptide

Penaeidins are a family of antimicrobial peptides of 47-63 residues isolated from several species of shrimp. These peptides display a proline-rich domain (N-terminal part) and a cysteine-rich domain (C-terminal part) stabilized by three conserved disulfide bonds whose arrangement has not yet been characterized. The recombinant penaeidin-3a of Litopenaeus vannamei (63 residues) and its [T8A]-Pen-3a analogue were produced in Saccharomyces cerevisiae and showed similar antimicrobial activity. The solution structure of the [T8A]-Pen-3a analogue was determined by using two-dimensional 1H NMR and simulated annealing calculations. The proline-rich domain, spanning residues 1-28 was found to be unconstrained. In contrast, the cysteine-rich domain, spanning residues 29-58, displays a well defined structure, which consists of an amphipathic helix (41-50) linked to the upstream and the downstream coils by two disulfide bonds (Cys32-Cys47 and Cys48-Cys55). These two coils are in turn linked together by the third disulfide bond (Cys36-Cys54). Such a disulfide bond packing, which is in agreement with the analysis of trypsin digests by ESI-MS, contributes to the highly hydrophobic core. Side chains of Arg45 and Arg50, which belong to the helix, and side chains of Arg37 and Arg53, which belong to the upstream and the downstream coils, are located in two opposite parts of this globular and compact structure. The environment of these positively charged residues, either by hydrophobic clusters at the surface of the cysteine-rich domain or by sequential hydrophobic residues in the unconstrained proline-rich domain, gives rise to the amphipathic character required for antimicrobial peptides. We hypothesize that the antimicrobial activity of penaeidins can be explained by a cooperative effect between the proline-rich and cysteine-rich features simultaneously present in their sequences.     

Interchain cysteine bridges control entry of progesterone to the central cavity of the uteroglobin dimer.

The progesterone-binding protein uteroglobin has been expressed in Escherichia coli in an unfused, soluble form. Like mature uteroglobin from rabbit endometrium (UG), the E.coli produced uteroglobin (UG1) dimerizes in vitro, forms an antiparallel dimer with Cys3-Cys69' and Cys69-Cys3' disulfide bonds and binds progesterone under reducing conditions. In order to analyze the dimerization and the reduction dependence of progesterone binding in more detail, we separately replaced cysteine 3 and cysteine 69 by serines. Under reducing conditions, both uteroglobin variants (UG1-3Ser and UG1-69Ser) bind progesterone with the same affinity as the wild-type suggesting that both cysteine residues are not directly involved in progesterone binding. In contrast to the wild-type protein, both cysteine variants also bind progesterone with high affinity in the absence of reducing agents. In addition, UG1-3Ser and UG1-69Ser both form covalently linked homodimers. Thus, unnatural Cys69-69' and Cys3-3' disulfide bonds exist in UG1-3Ser and UG1-69Ser, respectively. These data together with computer models based on X-ray diffraction data strongly support the idea that progesterone reaches its binding site located in an internal hydrophobic cavity via a hydrophobic tunnel along helices 1 and 4. Under non-reducing conditions the tunnel is closed by two disulfide bridges (Cys3-Cys69' and Cys69-Cys3') that lie in the most flexible region of the dimer. Reduction or replacement of a cysteine residue enables conformational changes that open the channel allowing progesterone to enter.     

Molecular cloning and sequence analysis of cDNA for batroxobin, a thrombin-like snake venom enzyme

Determination of the nucleotide sequence of a cDNA for batroxobin, a thrombin-like enzyme from Bothrops atrox, moojeni venom, allowed elucidation of the complete amino acid sequence of batroxobin for the first time for a thrombin-like snake venom enzyme. The molecular weight of batroxobin is 25,503 (231 amino acids). The amino acid sequence of batroxobin exhibits significant homology with those of mammalian serine proteases (trypsin, pancreatic kallikrein, and thrombin), indicating that batroxobin is a member of the serine protease family. Based on this homology and enzymatic and chemical studies, the catalytic residues and disulfide bridges of batroxobin were deduced to be as follows: catalytic residues, His41, Asp86, and Ser178; and disulfide bridges, Cys7-Cys139, Cys26-Cys42, Cys74-Cys230, Cys118-Cys184, Cys150-Cys163, and Cys174-Cys199. The amino-terminal amino acid residue of batroxobin, valine, is preceded by 24 amino acids. This may indicate that the amino-terminal hydrophobic peptide (18 amino acids) is a prepeptide and that the hydrophilic peptide (6 amino acids), preceded by the putative prepeptide, is a propeptide.     

Disulfide bond structure of the atrial natriuretic peptide receptor extracellular domain: conserved disulfide bonds among guanylate cyclase-coupled receptors

The disulfide bond structure of the extracellular domain of rat atrial natriuretic peptide (ANP) receptor (NPR-ECD) has been determined by mass spectrometry (MS) and Edman sequencing. Recombinant NPR-ECD expressed in COS-1 cells and purified from the culture medium binds ANP with as high affinity as the natural ANP receptor. Reaction with iodoacetic acid yielded no S-carboxymethylcysteine, indicating that all six Cys residues in NPR-ECD are involved in disulfide bonds. Electrospray ionization MS of NPR-ECD deglycosylated by peptide-N-glycosidase F gave a molecular mass of 48377.5+/-1.6 Da, which was consistent with the presence of three disulfide bonds. Liquid chromatography MS analysis of a lysylendopeptidase digest yielded three cystine-containing fragments with disulfide bonds Cys(60)-Cys(86), Cys(164)-Cys(213) and Cys(423)-Cys(432) based on their observed masses. These bonds were confirmed by Edman sequencing of each of the three fragments. No evidence for an inter-molecular disulfide bond was found. The six Cys residues in NPR-ECD, forming a 1-2, 3-4, 5-6 disulfide pairing pattern, are strictly conserved among A-type natriuretic peptide receptors and are similar in B-type receptors. We found that in other families of guanylate cyclase-coupled receptors, the Cys residues involved in 1-2 and 5-6 disulfide pairs are conserved in nearly all, suggesting an important contribution of these disulfide bonds to the receptor's structure and function.