In Situ Study of Purified Phase Transition Path for α-FAPbI3 Crystallization

Phase transition during annealing in the two-step sequential deposition has drawn intensive attention as its significance in fabricating superior perovskite films. However, previous works have not paid enough attention to the importance of the purified phase transition path in the crystallization process. Herein, different from the mixed paths in the conventional cognition, purified phase transition path for α-FAPbI₃ crystallization is achieved by introducing dimethylurea (DMU) into lead iodide (PbI₂) precursor solution. The multifunctional molecule is found to design a penetrable porous PbI₂ film and fundamentally regulate the perovskite crystallization by forming single phase transition path via the complete δ-phase during annealing of perovskite. The role of DMU in purified transition path for α-FAPbI₃ crystallization is unraveled with in situ photoluminescence and grazing incidence wide-angle x-ray scattering (GIWAXS) investigation. The crystal quality of perovskite films is significantly improved, resulting in single crystal-like film. The best-performing perovskite solar cells (PSCs) deliver a power conversion efficiency of 24.75%, resulting from the higher FF of 83.25% and an improved long-term stability up to 3600 h. This work highlights the importance of purified phase transition path for the superior crystal quality toward high-performance perovskite photovoltaics.     

A Smooth CH3NH3PbI3 Film via a New Approach for Forming the PbI2 Nanostructure Together with Strategically High CH3NH3I Concentration for High Efficient Planar‐Heterojunction Solar Cells

The photovoltaic performance of perovskite solar cells (PVSCs) is extremely dependent on the morphology and crystallization of the perovskite film, which is affected by the deposition method. In this work, a new approach is demonstrated for forming the PbI₂ nanostructure and the use of high CH₃NH₃I concentration which are adopted to form high‐quality (smooth and PbI₂ residue‐free) perovskite film with better photovoltaic performances. On the one hand, self‐assembled porous PbI₂ is formed by incorporating small amount of rationally chosen additives into the PbI₂ precursor solutions, which significantly facilitate the conversion of perovskite without any PbI₂ residue. On the other hand, by employing a relatively high CH₃NH₃I concentration, a firmly crystallized and uniform CH₃NH₃PbI₃ film is formed. As a result, a promising power conversion efficiency of 16.21% is achieved in planar‐heterojunction PVSCs. Furthermore, it is experimentally demonstrated that the PbI₂ residue in perovskite film has a negative effect on the long‐term stability of devices.     

The effect of solvent on preparation of CH3NH3PbI3 photodetectors via an antisolvent-free method

During the fabrication of lateral-structured photodetectors based on CH₃NH₃PbI₃ film, antisolvents represented by toluene are usually used to accelerate the crystallization of perovskite. Using antisolvent not only leads to the formation of shrinkage holes at the bottom of the perovskite layer, but the toxicity of antisolvents would also hinder the industrial preparation of perovskite devices. An antisolvent-free method is a possible solution to avoid these problems. Here, we report a lateral-structured photodetector based on an antisolvent-free method. The lateral photodetector exhibited a high responsivity of 1.75 A⋅W⁻¹ and specific detectivity (D*) of 3.54 × 10¹² Jones. In particular, the results indicated that the solvent had an influence on perovskite film morphology, crystallization, and device performance. The prepared CH₃NH₃PbI₃ film presented needle-like crystals and low performance with single precursor solvent N,N-dimethylformamide (DMF). In comparison, appropriate mixing of dimethyl sulfoxide (DMSO) could improve the morphology, crystallization, and performance of the film. In addition, the solvent volume ratio of the precursor had a profound effect on the performance of the as-prepared photodetectors. At a DMSO:DMF volume ratio of 5:5, the as-prepared film had massive perovskite crystals and fewer defects, resulting in optimal device performance, which can be explained by Urbach energy.     

Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?

Unreacted lead iodide is commonly believed to be beneficial to the efficiency of methylammonium lead iodide perovskite based solar cells, since it has been proposed to passivate the defects in perovskite grain boundaries. However, it is shown here that the presence of unreacted PbI₂ results in an intrinsic instability of the film under illumination, leading to the film degradation under inert atmosphere and faster degradation upon exposure to illumination and humidity. The perovskite films without lead iodide have improved stability, but lower efficiency due to inferior film morphology (smaller grain size, the presence of pinholes). Optimization of the deposition process resulted in PbI₂‐free perovskite films giving comparable efficiency to those with excess PbI₂ (14.2 ± 1.3% compared to 15.1 ± 0.9%) Thus, optimization of the deposition process for PbI₂‐free films leads to dense, pinhole‐free, large grain size perovskite films which result in cells with high efficiency without detrimental effects on the film photostability caused by excess PbI₂. However, it should be noted that for encapsulated devices illuminated through the substrate (fluorine‐doped tin oxide glass, TiO₂ film), film photostability is not a key factor in the device degradation.     

Aerosol‐Jet‐Assisted Thin‐Film Growth of CH3NH3PbI3 Perovskites—A Means to Achieve High Quality,Defect‐Free Films for Efficient Solar Cells

A high level of automation is desirable to facilitate the lab‐to‐fab process transfer of the emerging perovskite‐based solar technology. Here, an automated aerosol‐jet printing technique is introduced for precisely controlling the thin‐film perovskite growth in a planar heterojunction p–i–n solar cell device structure. The roles of some of the user defined parameters from a computer‐aided design file are studied for the reproducible fabrication of pure CH₃NH₃PbI₃ thin films under near ambient conditions. Preliminary power conversion efficiencies up to 15.4% are achieved when such films are incorporated in a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate‐perovskite‐phenyl‐C71‐butyric acid methyl ester type device format. It is further shown that the deposition of atomized materials in the form of a gaseous mist helps to form a highly uniform and PbI₂ residue‐free CH₃NH₃PbI₃ film and offers advantages over the conventional two‐step solution approach by avoiding the detrimental solid–liquid interface induced perovskite crystallization. Ultimately, by integrating full 3D motion control, the fabrication of perovskite layers directly on a 3D curved surface becomes possible. This work suggests that 3D automation with aerosol‐jet printing, once fully optimized, could form a universal platform for the lab‐to‐fab process transfer of solution‐based perovskite photovoltaics and steer development of new design strategies for numerous embedded structural power applications.     

Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring

Chemical passivation is an effective approach to suppress the grain surface dominated charge recombination in perovskite solar cells (PSCs). However, the passivation effect is usually labile on perovskite crystal surface since most passivating agents are weakly anchored. Here, the use of a bidentate molecule, 2‐mercaptopyridine (2‐MP), to increase anchoring strength for improving the passivation efficacy and stability synchronously is demonstrated. Compared to monodentate counterparts of pyridine and p‐toluenethiol, 2‐MP passivation on CH₃NH₃PbI₃ film results in twofold improvement of photoluminescence lifetime and remarkably enhanced tolerance to chlorobenzene washing and vacuum heating, which improve the power conversion efficiency of n–i–p planar structured PSCs from 18.35% to 20.28%, with open‐circuit voltage approaching 1.18 V. Moreover, the CH₃NH₃PbI₃ films passivated with 2‐MP exhibit unprecedented humid‐stability that they can be exposed to saturated humidity for at least 5 h, mainly due to the passivation induced surface deactivation, which renders the unencapsulated devices retaining 93% of the initial efficiency after 60 days aging in air with relative humidity of 60–70%.     

Stabilization of Precursor Solution and Perovskite Layer by Addition of Sulfur

Efficient perovskite solar cells (PSCs) are mainly fabricated by a solution coating processes. However, the efficiency of such devices varies significantly with the aging time of the precursor solution used to fabricate them, which includes a mixture of perovskite components, especially methylammonium (MA), and formamidinium (FA) cations. Herein, how the inorganic–organic hybrid perovskite precursor solution of (FAPbI₃)_0.95(MAPbBr₃)_0.05 degrades over time and how such degradation can be effectively inhibited is reported on, and the associated mechanism of degradation is discussed. Such degradation of the precursor solution is closely related to the loss of MA cations dissolved in the FA solution through the deprotonation of MA to volatile methylamine (CH₃NH₂). Addition of elemental sulfur (S₈) drastically stabilizes the precursor solution owing to amine–sulfur coordination, without compromising the power conversion efficiency (PCE) of the derived PSCs. Furthermore, sulfur introduced to stabilize the precursor solution results in improved PSC stability.     

Growth Engineering of CH3NH3PbI3 Structures for High‐Efficiency Solar Cells

Controlling the growth of perovskite crystals has been one of the interesting strategies to mold their fundamental properties and exploit their potential in the fabrication of high performance solar cells. Herein, the impact of chloride on the conversion of lead halide into CH₃NH₃PbI₃, morphology, and coverage of perovskite structures using modified two‐step approach is investigated systematically, which eventually dictates the overall performance of the resulting device. Structural and morphological characterization is thoroughly carried out by X‐ray diffraction and field emission scanning electron microscopy, respectively. Various spectroscopic techniques provide ample evidence that CH₃NH₃PbI₃ structures formed in the presence of chloride, in the lead halide precursor solution, exhibit desired properties, such as fewer defects. Moreover, the morphology of CH₃NH₃PbI₃ structures and surface coverage of the resulting layers are considerably different from those obtained in the absence of chloride. After gaining a rational understanding regarding the effect of chloride on the growth, morphology, and optical properties of CH₃NH₃PbI₃ structures, fabrication of devices revealing a power conversion efficiency of over 16% under standard AM 1.5 G illumination is realized. The fundamental understanding and high efficiency reported here distinguishes our results, particularly where chloride based precursors are involved.     

Halogen Engineering for Operationally Stable Perovskite Solar Cells via Sequential Deposition

The performance of perovskite solar cells (PSCs) relies on the synthesis method and chemical composition of the perovskite materials. So far, PSCs that have adopted two‐step sequential deposited perovskite with the state‐of‐art composition (FAPbI₃)_1?x(MAPbBr₃)_x (x < 0.05) have achieved record power conversion efficiency (PCE), while their one‐step antisolvent dripping counterparts with typical composition Cs_0.05FA_0.81MA_0.14Pb(I_0.85Br_0.15)₃ with more bromine have exhibited much better long‐term operational stability. Thus, halogen engineering that aims to elevate bromine content in sequential deposited perovskite film would push operational stability of PSCs toward that of antisolvent dripping deposited perovskite materials. Here, a Br‐rich seeding growth method is devised and perovskite seed solution with high bromine content is introduced into a PbI₂ precursor, leading to bromine incorporation in the resulting perovskite film. Photovoltaic devices fabricated by Br‐rich seeding growth method exhibit a PCE of 21.5%, similar to 21.6% for PSCs having lower bromine content. Whereas, the operational stability of PSCs with higher bromine content is significantly enhanced, with over 80% of initial PCE retained after 500 h tracking at maximum power point under 1‐sun illumination. This work highlights the vital importance of halogen composition for the operational stability of PSCs, and introduces an effective way to incorporate bromine into mixed‐cation‐halide perovskite film via sequential deposition method.     

Impact of PbI2 Passivation and Grain Size Engineering in CH3NH3PbI3 Solar Absorbers as Revealed by Carrier‐Resolved Photo‐Hall Technique

With power conversion efficiencies now exceeding 25%, hybrid perovskite solar cells require deeper understanding of defects and processing to further approach the Shockley‐Queisser limit. One approach for processing enhancement and defect reduction involves additive engineering—, e.g., addition of MASCN (MA = methylammonium) and excess PbI₂ have been shown to modify film grain structure and improve performance. However, the underlying impact of these additives on transport and recombination properties remains to be fully elucidated. In this study, a newly developed carrier‐resolved photo‐Hall (CRPH) characterization technique is used that gives access to both majority and minority carrier properties within the same sample and over a wide range of illumination conditions. CRPH measurements on n‐type MAPbI₃ films reveal an order of magnitude increase in carrier recombination lifetime and electron density for 5% excess PbI₂ added to the precursor solution, with little change noted in electron and hole mobility values. Grain size variation (120–2100 nm) and MASCN addition induce no significant change in carrier‐related parameters considered, highlighting the benign nature of the grain boundaries and that excess PbI₂ must predominantly passivate bulk defects rather than defects situated at grain boundaries. This study offers a unique picture of additive impact on MAPbI₃ optoelectronic properties as elucidated by the new CRPH approach.     

Scalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates

Perovskite materials are good candidates for flexible photovoltaic applications due to their strong absorption and low‐temperature processing, but efficient flexible perovskite modules have not yet been realized. Here, a record efficiency flexible perovskite solar module is demonstrated by blade coating high‐quality perovskite films on flexible Corning Willow Glass using additive engineering. Ammonium chloride (NH₄Cl) is added into the perovskite precursor solution to retard the nucleation which prevents voids formation at the interface of perovskite and glass. The addition of NH₄Cl also suppresses the formation of PbI₂ and reduces the trap density in the perovskite films. The implementation of NH₄Cl enables the fabrication of single junction flexible perovskite solar devices with an efficiency of 19.72% on small‐area cells and a record aperture efficiency of 15.86% on modules with an area of 42.9 cm². This work provides a simple way to scale up high‐efficiency flexible perovskite modules for various applications.     

Electrospray‐Assisted Fabrication of Moisture‐Resistant and Highly Stable Perovskite Solar Cells at Ambient Conditions

An electrospray deposition technique to fabricate a perovskite (CH₃NH₃PbI₃) layer for highly stable and efficient perovskite solar cells at ambient humidity (30%–50% relative humidity) conditions is demonstrated. A detailed study is conducted to determine the effect of different electrospray parameters on the device performance and to provide a mechanistic explanation of the superior stability of the films. Due to the controlled reactivity that results in the formation of a smooth perovskite film, these cells exhibit stability exceeding 4000 h, in contrast to much lower stability of those fabricated by conventional spin coating methods. Furthermore, the perovskite film deposited by electrospray methods exhibits a self‐healing behavior when exposed to moisture. The authors hypothesize the formation of an intermediate metastable phase and smooth morphology of the film as the reason for this enhanced stability. Electrospray is a scalable technique that provides precise control over the amount of material required for deposition, reducing significant material loss that occurs in conventional solution‐based methods. Overall, this work shows that stability of perovskite solar cells can be improved by fabrication using a well controlled and optimized electrospray technique, without the use of any additives or cell encapsulants.     

Fused‐Ring Electron Acceptor ITIC‐Th: A Novel Stabilizer for Halide Perovskite Precursor Solution

Solution‐processed perovskite solar cells have great potential for low‐cost roll‐to‐roll fabrication. However, the degradation of aged precursor solutions will become a critical obstacle to mass production. In this report, a small molecule (ITIC‐Th) is employed to stabilize the perovskite precursor solution containing mixed cations and halides. It is found that ITIC‐Th can effectively suppress the formation of yellow δ‐phase in the films made from aged precursor solutions. Consequently, the devices fabricated from the aged precursor solution with ITIC‐Th experience much less efficiency drop with the increase of the precursor aging time—from 19.20% (fresh) to 16.55% (39 d), compared with the devices made from conventional precursor solutions dropping from 18.07% (fresh) to 1.76% (39 d). The characterizations suggest that ITIC‐Th is beneficial for CH₃NH₃⁺ cations to be incorporated into the crystal structure, facilitating the formation of perovskite phase. Furthermore, the presence of ITIC‐Th in the perovskite thin film gives rise to additional photocurrent as well as improved fill factor due to the well‐matched energy levels, the passivation of defects, and the complementary absorption spectra, suggesting a new route toward future high‐efficiency solar cells—incorporating organic non‐fullerene acceptors and halide perovskite materials into the same active layer.     

High‐Performance Perovskite Solar Cells with Excellent Humidity and Thermo‐Stability via Fluorinated Perylenediimide

The notoriously poor stability of perovskite solar cells is a crucial issue restricting commercial applications. Here, a fluorinated perylenediimide (F‐PDI) is first introduced into perovskite film to enhance the device's photovoltaic performance, as well as thermal and moisture stability simultaneously. The conductive F‐PDI molecules filling at grain boundaries (GBs) and surface of perovskite film can passivate defects and promote charge transport through GBs due to the chelation between carbonyl of F‐PDI and noncoordinating lead. Furthermore, an effective multiple hydrophobic structure is formed to protect perovskite film from moisture erosion. As a result, the F‐PDI‐incorporated devices based on MAPbI₃ and Cs_0.05 (FA_0.83MA_0.17)_0.95 Pb (Br_0.17I_0.83)₃ absorber achieve champion efficiencies of 18.28% and 19.26%, respectively. Over 80% of the initial efficiency is maintained after exposure in air for 30 days with a relative humidity (RH) of 50%. In addition, the strong hydrogen bonding of F···H‐N can immobilize methylamine ion (MA⁺) and thus enhances the thermal stability of device, remaining nearly 70% of the initial value after thermal treatment (100 °C) for 24 h at 50% RH condition.     

Efficient Passivation with Lead Pyridine‐2‐Carboxylic for High‐Performance and Stable Perovskite Solar Cells

Stability has become the main obstacle for the commercialization of perovskite solar cells (PSCs) despite the impressive power conversion efficiency (PCE). Poor crystallization and ion migration of perovskite are the major origins of its degradation under working condition. Here, high‐performance PSCs incorporated with pyridine‐2‐carboxylic lead salt (PbPyA₂) are fabricated. The pyridine and carboxyl groups on PbPyA₂ can not only control crystallization but also passivate grain boundaries (GBs), which result in the high‐quality perovskite film with larger grains and fewer defects. In addition, the strong interaction among the hydrophobic PbPyA₂ molecules and perovskite GBs acts as barriers to ion migration and component volatilization when exposed to external stresses. Consequently, superior optoelectronic perovskite films with improved thermal and moisture stability are obtained. The resulting device shows a champion efficiency of 19.96% with negligible hysteresis. Furthermore, thermal (90 °C) and moisture (RH 40–60%) stability are improved threefold, maintaining 80% of initial efficiency after aging for 480 h. More importantly, the doped device exhibits extraordinary improvement of operational stability and remains 93% of initial efficiency under maximum power point (MPP) tracking for 540 h.     

High‐Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on a (p‐FC6H4C2H4NH3)2[PbI4] Capping Layer

Supported by the density functional theory (DFT) calculations, for the first time, a fluorinated aromatic cation, 2‐(4‐fluorophenyl)ethyl ammonium iodide (FPEAI), is introduced to grow in situ a low dimensional perovskite layer atop 3D perovskite film with excess PbI₂. The resulted (p‐FC₆H₄C₂H₄NH₃)₂[PbI₄] perovskite functions as a protective capping layer to protect the 3D perovskite from moisture. In the meantime, the thin layer facilitates charge transfer at the interfaces, thereby reducing the nonradiative recombination pathways. Laser scanning confocal microscopy unveils visually the distribution of the 2D perovskite layer on top of the 3D perovskite. When employing the 3D–2D perovskite as the absorbing layer in the photovoltaic cells, a high power conversion efficiency of 20.54% is realized. Superior device performance and moisture stability are observed with the modified perovskite over the whole stability test period.     

Aquointermediate Assisted Highly Orientated Perovskite Thin Films toward Thermally Stable and Efficient Solar Cells

The stability of single‐crystalline/monocrystalline‐like perovskite film is expected to be better than its microcrystalline counterparts. In the present work, highly orientated perovskite thin films (CH₃NH₃PbI_3–xCl_x) are prepared by means of aquointermediates assisted solution process. It displays super‐duper preferred‐orientation along <110> direction that is close to the single crystal, and its diffraction intensity ratio of (110)/(310) is nearly two orders of magnitude higher in contrast to the films that prepared by traditional way. Owing to its superior performances, e.g., highly crystallized quality, stress‐free inside films, longer electron lifetime, faster temporal response time, etc., the highly orientated perovskite‐based solar cells accordingly allow realizing high efficiency while improving its thermal stability.     

Alternative Perovskites for Photovoltaics

The discovery of unique optoelectronic properties of 3D ABX₃ perovskites has produced a great impact on the field of photovoltaics. In the initial years after the breakthrough, interest has focused on a limited number of 3D ABX₃ perovskite materials, including the archetypal CH₃NH₃PbI₃ and its counterparts. Undoubtedly, the main limitation of perovskite devices is their low stability due the fast degradation of the perovskite layer; however, the high toxicity of Pb also poses a concern. Herein, the recent increasing number of articles reporting the theoretical modeling, synthesis, optoelectronic characterization, and implementation of alternative perovskite materials in solar devices is summarized. The extensive variety of perovskite derivatives is classified according to the material dimensionality and the crystal structure. The particular strengths and weaknesses for each novel material are discussed, and the device performance and potential stability enhancements are also highlighted.     

Simultaneous Improvement of Photovoltaic Performance and Stability by In Situ Formation of 2D Perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN Interface

To solve the stability issues of perovskite solar cells (PSC), here a novel interface engineering strategy that a versatile ultrathin 2D perovskite (5‐AVA)₂PbI₄ (5‐AVA = 5‐ammoniumvaleric acid) passivation layer that is in situ incorporated at the interface between (FAPbI₃)_0.88(CsPbBr₃)_0.12 and the hole transporting CuSCN is reported. Surface analysis using X‐ray photoelectron spectroscopy confirms the formation of 2D perovskite. Hysteresis is reduced by the interfacial 2D layer, which could be ascribed to improvement of interfacial charge extraction efficiency, associated with suppression of recombination. Moreover, introduction of the interface passivating layer enhances the moisture stability and photostability as compared to the control perovskite film due to hydrophobic nature of 2D perovskite. The unencapsulated device retains 98% of the initial power conversion efficiency (PCE) after 63 d under moisture exposure of about 10% in the dark. A PCE of the control device is boosted from 13.72 to 16.75% as a consequence of enhanced open‐circuit voltage (V_oc) and fill factor along with slightly increased short‐circuit current density (J_sc), which results from reduced trap states of (FAPbI₃)_0.88(CsPbBr₃)_0.12 as evidenced by enhanced carrier lifetimes and charge extraction. The perovskite/hole transport material interface engineering gives insight into simultaneous improvements of PCE and device stability.     

Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film

The synthesis and growth of perovskite films with controlled crystallinity and microstructure for highly efficient and stable solar cells is a critical issue. In this work, thiourea is introduced into the CH₃NH₃PbI₃ precursor with two‐step sequential ethyl acetate (EA) interfacial processing. This is shown for the first time to grow compact microsized and monolithically grained perovskite films. X‐ray diffraction patterns and infrared spectroscopy are used to prove that thiourea significantly impacts the perovskite crystallinity and morphology by forming the intermediate phase MAI·PbI₂·S?C(NH₂)₂. Afterward, the residual thiourea which coursed charge recombination is completely extracted by the sequential EA processing. The product has improved light harvesting, suppressed defect state, and enhanced charge separation and transport. The sequentially EA processed perovskite solar cells offer an impressive 18.46% power conversion efficiency and excellent stability in ambient air. More importantly, the EA postprocessed perovskite solar cells also have excellent voltage response under ultraweak light (0.05% sun) with promising utility in photodetectors and photoelectric sensors.