Filament arrangements in negatively stained cultured cells: the organization of actin

Treatment of spread, cultured cells with Triton X-100 followed by negative staining reveals the organization of the unextracted intracellular filamentous elements: actin, microtubules and the 100 angstrom filaments. The present report describes the organization of the actin-like filaments in human skin fibroblasts and mouse 3 T 3 cells. As shown in earlier studies, the cytoplasmic stress fibres were seen to be composed of bundles of colinear actin-like filaments. In addition to these large stress fibres much smaller bundles of thin filaments as well as randomly oriented thin filaments were also observed. A thick bundle of thin filaments, 0.2 microm to 0.5 microm in diameter, was found to delimit the concave cell edges most prominent in well-spread stationary cells. The leading edge and ruffled border of human skin fibroblasts appeared as a broad web, of meshwork of diagonally oriented thin filaments interconnecting radiating, linear bundles of thin filaments about 0.1 microm in diameter. These bundles corresponding to the microspikes described earlier ranged from about 1.5 microm in length and were separated by 1 microm to 3 microm laterally. The leading edge of 3 T 3 cells showed a similar organization but with fewer radiating thin filament bundles. Both the filaments in the bundles and in the meshwork formed arrowhead complexes with smooth muscle myosin subfragment - 1 which were unipolar and directed towards the main body of the cell. The findings are discussed in relation to the mechanisms of non-muscle cell motility.     

Endothelial cell connecting filaments anchor endothelial cells to the subjacent elastic lamina in the developing aortic intima of the mouse

The ultrastructural association of endothelial cells with the subjacent elastic lamina was investigated in the developing mouse aorta by electron microscopy. In the 5-day postnatal aorta, extensive filament bundles extend along the subendothelial matrix connecting the endothelial cells to the underlying elastic lamina. The connecting filaments form lateral associations with the abluminal surface of the endothelial cells in regions of membrane occupied by membrane-associated dense plaques. On the intracellular face of each plaque, the termini of stress fibers penetrate and anchor to the cell membrane in alignment with the extracellular connecting filaments. Both the stress fibers and the connecting filaments are oriented parallel to the longitudinal axis of the vessel. High magnification electron micrographs of individual endothelial cell connecting filaments reveal features similar to those of elastin-associated microfibrils. Each connecting filament consists of a 9–10 nm linear core with an electron-lucent center and peripheral spike-like projections. From the filaments, small thread-like extensions span laterally, linking the filaments into a loose bundle and anchoring them to the endothelial cell membrane and the surface of the elastic lamina. The filaments also appear heavily coated with electron-dense material; often with some degree of periodicity along the filament length. During development, the number of endothelial cell connecting filaments decreases as the elastic lamina expands and the subendothelial matrix is reduced. In the aortic intima of mature mice, the elastic lamina is closely apposed to the abluminal surface of the endothelial cell and no connecting filaments are seen. These observations suggest that endothelial cell connecting filaments are developmental features of the aortic intima which, together with the intracellular stress fibers, aid to maintain the structural integrity of the endothelial cell layer during development by providing the cells with protection from intraluminal shear forces.     

Actin filament bundling by fimbrin is important for endocytosis, cytokinesis, and polarization in fission yeast

Through the coordinated action of diverse actin-binding proteins, cells simultaneously assemble actin filaments with distinct architectures and dynamics to drive different processes. Actin filament cross-linking proteins organize filaments into higher order networks, although the requirement of cross-linking activity in cells has largely been assumed rather than directly tested. Fission yeast Schizosaccharomyces pombe assembles actin into three discrete structures: endocytic actin patches, polarizing actin cables, and the cytokinetic contractile ring. The fission yeast filament cross-linker fimbrin Fim1 primarily localizes to Arp2/3 complex-nucleated branched filaments of the actin patch and by a lesser amount to bundles of linear antiparallel filaments in the contractile ring. It is unclear whether Fim1 associates with bundles of parallel filaments in actin cables. We previously discovered that a principal role of Fim1 is to control localization of tropomyosin Cdc8, thereby facilitating cofilin-mediated filament turnover. Therefore, we hypothesized that the bundling ability of Fim1 is dispensable for actin patches but is important for the contractile ring and possibly actin cables. By directly visualizing actin filament assembly using total internal reflection fluorescence microscopy, we determined that Fim1 bundles filaments in both parallel and antiparallel orientations and efficiently bundles Arp2/3 complex-branched filaments in the absence but not the presence of actin capping protein. Examination of cells exclusively expressing a truncated version of Fim1 that can bind but not bundle actin filaments revealed that bundling activity of Fim1 is in fact important for all three actin structures. Therefore, fimbrin Fim1 has diverse roles as both a filament "gatekeeper" and as a filament cross-linker.     

FINE STRUCTURE AND SIZE DISTRIBUTION OF FREE THICK FILAMENTS IN EARLY FIBRILLOGENESIS OF ASCIDIAN TADPOLE

The development and the size distribution of free thick filaments which accumulate in the early stages of myofibril formation in somitic myoblasts of the ascidian tadpole were studied by electron microscopy. Such filaments appeared in the cell cortex but, rather dominantly, the aggregates of these thick filaments and filamentous structures were observed in the interior of the cell. The aggregate consisted of some of the following elements: filamentous structures (20–60 A in diameter); free thick filaments (60–220 A); dense Z-band precursor materials; bundles of thick (140–160 A) and thin (60–70 A) filaments; and ribosomal clusters. The free thick filaments were variable in diameter and showed long lateral projections (300–600 A) and tapered ends.
The variation curve in diameter of the free thick filaments indicates a continuous size distribution, suggesting the continuous growth of these filaments by polymerization of myosin molecules. Free thick filaments thicker than myosin filaments which were found within myofibrils were present; their significance is discussed in relation to myosin filament formation.     

Identification of Novel Graded Polarity Actin Filament Bundles in Locomoting Heart Fibroblasts: Implications for the Generation of Motile Force

We have determined the structural organization and dynamic behavior of actin filaments in entire primary locomoting heart fibroblasts by S1 decoration, serial section EM, and photoactivation of fluorescence. As expected, actin filaments in the lamellipodium of these cells have uniform polarity with barbed ends facing forward. In the lamella, cell body, and tail there are two observable types of actin filament organization. A less abundant type is located on the inner surface of the plasma membrane and is composed of short, overlapping actin bundles (0.25–2.5 μm) that repeatedly alternate in polarity from uniform barbed ends forward to uniform pointed ends forward. This type of organization is similar to the organization we show for actin filament bundles (stress fibers) in nonlocomoting cells (PtK2 cells) and to the known organization of muscle sarcomeres. The more abundant type of actin filament organization in locomoting heart fibroblasts is mostly ventrally located and is composed of long, overlapping bundles (average 13 μm, but can reach up to about 30 μm) which span the length of the cell. This more abundant type has a novel graded polarity organization. In each actin bundle, polarity gradually changes along the length of the bundle. Actual actin filament polarity at any given point in the bundle is determined by position in the cell; the closer to the front of the cell the more barbed ends of actin filaments face forward.

By photoactivation marking in locomoting heart fibroblasts, as expected in the lamellipodium, actin filaments flow rearward with respect to substrate. In the lamella, all marked and observed actin filaments remain stationary with respect to substrate as the fibroblast locomotes. In the cell body of locomoting fibroblasts there are two dynamic populations of actin filaments: one remains stationary and the other moves forward with respect to substrate at the rate of the cell body.

This is the first time that the structural organization and dynamics of actin filaments have been determined in an entire locomoting cell. The organization, dynamics, and relative abundance of graded polarity actin filament bundles have important implications for the generation of motile force during primary heart fibroblast locomotion.

     

Unidirectional sliding of myosin filaments along the bundle of F-actin filaments spontaneously formed during superprecipitation

I reported previously (Higashi-Fujime, S., 1982, Cold Spring Harbor Symp. Quant. Biol., 46:69-75) that active movements of fibrils composed of F-actin and myosin filaments occurred after superprecipitation in the presence of ATP at low ionic strengths. When the concentration of MgCl2 in the medium used in the above experiment was raised to 20-26 mM, bundles of F-actin filaments, in addition to large precipitates, were formed spontaneously both during and after superprecipitation. Along these bundles, many myosin filaments were observed to slide unidirectionally and successively through the bundle, from one end to the other. The sliding of myosin filaments continued for approximately 1 h at room temperature at a mean rate of 6.0 micron/s, as long as ATP remained in the medium. By electron microscopy, it was found that most F-actin filaments decorated with heavy meromyosin pointed to the same direction in the bundle. Myosin filaments moved actively not only along the F-actin bundle but also in the medium. Such movement probably occurred along F-actin filaments that did not form the bundle but were dispersed in the medium, although dispersed F-actin filaments were not visible under the microscope. In this case, myosin filament could have moved in a reverse direction, changing from one F-actin filament to the other. These results suggested that the direction of movement of myosin filament, which has a bipolar structure and the potentiality to move in both directions, was determined by the polarity of F-actin filament in action.     

Actin filaments elongate from their membrane-associated ends

In limulus sperm an actin filament bundle 55 mum in length extends from the acrosomal vacuole membrane through a canal in the nucleus and then coils in a regular fashion around the base of the nucleus. The bundle expands systematically from 15 filaments near the acrosomal vacuole to 85 filaments at the basal end. Thin sections of sperm fixed during stages in spermatid maturation reveal that the filament bundle begins to assemble on dense material attached to the acrosomal vacuole membrane. In micrographs fo these early stages in maturation, short bundles are seen extending posteriorly from the dense material. The significance is that these short, developing bundles have about 85 filaments, suggesting that the 85-filament end of the bundle is assembled first. By using filament bundles isolated and incubated in vitro with G actin from muscle, we can determine the end “preferred” for addition of actin monomers during polymerization. The end that would be associated with the acrosomal vacuole membrane, a membrane destined to be continuous with the plasma membrane, is preferred about 10 times over the other, thicker end. Decoration of the newly polymerized portions of the filament bundle with subfragment 1 of myosin reveals that the arrowheads point away from the acrosomal vacuole membrane, as is true of other actin filament bundles attached to membranes. From these observations we conclude that the bundle is nucleated from the dense material associated with the acrosomal vacuole and that monomers are added to the membrane-associated end. As monomers are added at the dense material, the thick first-made end of the filament bundle is pushed down through the nucleus where, upon reaching the base of the nucleus, it coils up. Tapering is brought about by the capping of the peripheral filaments in the bundle.     

Drosophila singed, a fascin homolog, is required for actin bundle formation during oogenesis and bristle extension

Drosophila singed mutants were named for their gnarled bristle phenotype but severe alleles are also female sterile. Recently, singed protein was shown to have 35% peptide identity with echinoderm fascin. Fascin is found in actin filament bundles in microvilli of sea urchin eggs and in filopodial extensions in coelomocytes. We show that Drosophila singed is required for actin filament bundle formation in the cytoplasm of nurse cells during oogenesis; in severe mutants, the absence of cytoplasmic actin filament bundles allows nurse cell nuclei to lodge in ring canals and block nurse cell cytoplasm transport. Singed is also required for organized actin filament bundle formation in the cellular extension that forms a bristle; in severe mutants, the small disorganized actin filament bundles lack structural integrity and allow bristles to bend and branch during extension. Singed protein is also expressed in migratory cells of the developing egg chamber and in the socket cell of the developing bristle, but no defect is observed in these cells in singed mutants. Purified, bacterially expressed singed protein bundles actin filaments in vitro with the same stoichiometry reported for purified sea urchin fascin. Singed-saturated actin bundles have a molar ratio of singed/actin of approximately 1:4.3 and a transverse cross-banding pattern of 12 nm seen using electron microscopy. Our results suggest that singed protein is required for actin filament bundle formation and is a Drosophila homolog of echinoderm fascin.     

Long continuous actin bundles in Drosophila bristles are constructed by overlapping short filaments

The actin bundles essential for Drosophila bristle elongation are hundreds of microns long and composed of cross-linked unipolar filaments. These long bundles are built from much shorter modules that graft together. Using both confocal and electron microscopy, we demonstrate that newly synthesized modules are short (1-2 microm in length); modules elongate to approximately 3 microm by growing over the surface of longitudinally adjacent modules to form a graft; the grafted regions are initially secured by the forked protein cross-bridge and later by the fascin cross-bridge; actin bundles are smoothed by filament addition and appear continuous and without swellings; and in the absence of grafting, dramatic alterations in cell shape occur that substitutes cell width expansion for elongation. Thus, bundle morphogenesis has several components: module formation, elongation, grafting, and bundle smoothing. These actin bundles are much like a rope or cable, made by overlapping elements that run a small fraction of the overall length, and stiffened by cross-linking.     

Differentiation of actin-containing filaments during chick skeletal myogenesis.

Actin-containing filaments in cultures of differentiating chick skeletal muscle were examined by indirect immunofluorescence and transmission electron microscopy (TEM). As early as 20 h in culture, a large proportion of the pre-fusion population appeared as elongated, bipolar cells which contained actin filaments parallel to the longitudinal axis of the cell. During fusion, most of the mononucleated cells were bipolar and contained actin filament bundles which appeared to extend the entire length of the cell body and lie in close proximity to the plasma membrane. Striations were observed within actin filament bundles only after fusion had been completed. The small number of non-myogenic cells present in the cultures were not observed to display a bipolar morphology, orientation of actin fibers parallel to the longitudinal axis of the cell, or striations in their actin filament bundles.     

Actin filament turnover regulated by cross-linking accounts for the size, shape, location, and number of actin bundles in Drosophila bristles

Drosophila bristle cells are shaped during growth by longitudinal bundles of cross-linked actin filaments attached to the plasma membrane. We used confocal and electron microscopy to examine actin bundle structure and found that during bristle elongation, snarls of uncross-linked actin filaments and small internal bundles also form in the shaft cytoplasm only to disappear within 4 min. Thus, formation and later removal of actin filaments are prominent features of growing bristles. These transient snarls and internal bundles can be stabilized by culturing elongating bristles with jasplakinolide, a membrane-permeant inhibitor of actin filament depolymerization, resulting in enormous numbers of internal bundles and uncross-linked filaments. Examination of bundle disassembly in mutant bristles shows that plasma membrane association and cross-bridging adjacent actin filaments together inhibits depolymerization. Thus, highly cross-bridged and membrane-bound actin filaments turn over slowly and persist, whereas poorly cross-linked filaments turnover more rapidly. We argue that the selection of stable bundles relative to poorly cross-bridged filaments can account for the size, shape, number, and location of the longitudinal actin bundles in bristles. As a result, filament turnover plays an important role in regulating cytoskeleton assembly and consequently cell shape.     

The Stepping Pattern of Myosin X Is Adapted for Processive Motility on Bundled Actin

Myosin X is a molecular motor that is adapted to select bundled actin filaments over single actin filaments for processive motility. Its unique form of motility suggests that myosin X's stepping mechanism takes advantage of the arrangement of actin filaments and the additional target binding sites found within a bundle. Here we use fluorescence imaging with one-nanometer accuracy to show that myosin X takes steps of ∼18 nm along a fascin-actin bundle. This step-size is well short of the 36-nm step-size observed in myosin V and myosin VI that corresponds to the actin pseudohelical repeat distance. Myosin X is able to walk along bundles with this step-size if it straddles two actin filaments, but would be quickly forced to spiral into the constrained interior of the bundle if it were to use only a single actin filament. We also demonstrate that myosin X takes many sideways steps as it walks along a bundle, suggesting that it can switch actin filament pairs within the bundle as it walks. Sideways steps to the left or the right occur on bundles with equal frequency, suggesting a degree of lateral flexibility such that the motor's working stroke does not bias it to the left or to the right. On single actin filaments, we find a broad mixture of 10-20-nm steps, which again falls short of the 36-nm actin repeat. Moreover, the motor leans to the right as it walks along single filaments, which may require myosin X to adopt strained configurations. As a control, we also tracked myosin V stepping along actin filaments and fascin-actin bundles. We find that myosin V follows a narrower path on both structures, walking primarily along one surface of an actin filament and following a single filament within a bundle while occasionally switching to neighboring filaments. Together, these results delineate some of the structural features of the motor and the track that allow myosin X to recognize actin filament bundles.     

The actin filament severing protein actophorin promotes the formation of rigid bundles of actin filaments crosslinked with alpha-actinin

The actin filament severing protein, Acanthamoeba actophorin, decreases the viscosity of actin filaments, but increases the stiffness and viscosity of mixtures of actin filaments and the crosslinking protein alpha-actinin. The explanation of this paradox is that in the presence of both the severing protein and crosslinker the actin filaments aggregate into an interlocking meshwork of bundles large enough to be visualized by light microscopy. The size of these bundles depends on the size of the containing vessel. The actin filaments in these bundles are tightly packed in some areas while in others they are more disperse. The bundles form a continuous reticulum that fills the container, since the filaments from a particular bundle may interdigitate with filaments from other bundles at points where they intersect. The same phenomena are seen when rabbit muscle aldolase rather than alpha-actinin is used as the crosslinker. We propose that actophorin promotes bundling by shortening the actin filaments enough to allow them to rotate into positions favorable for lateral interactions with each other via alpha-actinin. The network of bundles is more rigid and less thixotropic than the corresponding network of single actin filaments linked by alpha-actinin. One explanation may be that alpha-actinin (or aldolase) normally in rapid equilibria with actin filaments may become trapped between the filaments increasing the effective concentration of the crosslinker.     

Actin filament bundles in Drosophila wing hairs: hairs and bristles use different strategies for assembly

Actin filament bundles can shape cellular extensions into dramatically different forms. We examined cytoskeleton formation during wing hair morphogenesis using both confocal and electron microscopy. Hairs elongate with linear kinetics (approximately 1 microm/h) over the course of approximately 18 h. The resulting structure is vividly asymmetric and shaped like a rose thorn--elongated in the distal direction, curved in two dimensions with an oval base and a round tip. High-resolution analysis shows that the cytoskeleton forms from microvilli-like pimples that project actin filaments into the cytoplasm. These filaments become cross-linked into bundles by the sequential use of three cross-bridges: villin, forked and fascin. Genetic loss of each cross-bridge affects cell shape. Filament bundles associate together, with no lateral membrane attachments, into a cone of overlapping bundles that matures into an oval base by the asymmetric addition of bundles on the distal side. In contrast, the long bristle cell extension is supported by equally long (up to 400 microm) filament bundles assembled together by end-to-end grafting of shorter modules. Thus, bristle and hair cells use microvilli and cross-bridges to generate the common raw material of actin filament bundles but employ different strategies to assemble these into vastly different shapes.     

Confocal Microscopy Observations on Actin Cytoskeleton in the Pollen and Pollen Protoplast of Narcissus

Actin cytoskeleton was localized in the pollen and pollen protoplast of Narcissus cyclamineus using fluorescence labelled phalloidin andconfocal microscopy. In the hydrated pollen (before germination) actin filamem bundles were arranged in a parallel array and at right angles to the long axis of the pollen grain in the cortex. But at the germination pore region(or fur row) the actin filament bundles formed a reticulate network. In the centre of the grain there was also an actin filament network which was more open and had less bundles associated with it than the network underneath the furrow. When the pollen grain started to produce pollen tube, most(if not all) of the actin filament bundles in the pollen grain rearranged into a parallel array pointing towards the tube. The bundles in the array later elongated and extended into the pollen tube. In the pollen protoplast a very tightly-packed actin bundle network was present. Numerous branches and jonts of actin filament bundles could be seen in the network. If the protoplasts were fixed before staining, the bundles aggregated and the branches and joints became less obvious indicating that fixation had affected the nature and arrangement of the actin filament bundles. If the pollen protoplasts were bursted (using the osmotic shock technique) or extracted (using Triton X-100), fragments of actin filament bundles could still be found associated with the membrane ghost indicating that some of the actin filament bundles in the cortex were tightly attached to the membrane. Using a double staining technique, actin filaments and microtubules were co-localized in the pollen protoplast. The co-alignment of some of the actin filament bundles with the microtubule bundles suggested that the actin cytoskeleton and the microtubule cytoskeleton were not distributed at random but in a well organized and orchestrated manner [possibly under the control of a yet undiscovered structure(s). The actin filament cytoskeleton in the generative cells failed to stain either in pollen or pollen tube, but they became stained in the pollen protoplast. The actin cytoskeleton in the generative cell appeared as a loosely organized network made up of short and long actin filament bundles.     

Filament-directed intercellular contacts during differentiation of cultured chick myoblasts

Detergent-extracted, critical point dried chicken myoblasts at early stages of development in tissue culture were observed by electron microscopy. It was found that the organization of filaments within these cells changes significantly during development. A particular specialization of the cellular filament framework is the formation of microprocesses; long extensions of the cellular filament system. These microprocesses appear to be involved in cell-to-cell contact. The filaments of these processes appear to integrate with the filament system of a contacted cell, and possibly transmit tension from one cell to another. The role of these structures in effecting muscle differentiation by forming cytoplasmic connections and the implications for muscle gene expression are discussed.     

Novel filamentous bundles in the cytoplasm of a unicellular eukaryote,Crithidia fasciculata

Summary Trypanosomes, an evolutionarily ancient group of unicellular eukaryotic parasites, appear to lack both microfilaments (actin) and intermediate filaments (IFs): the major cytoskeletal component common to all trypanosomes consists of a stable microtubular array intimately associated with the plasma membrane. We present here evidence of bundles of trans-cytoplasmic filaments ca. 10 nm in diameter, seen by transmission electron microscopy, that are formed in stationary cultures of an insect trypanosome,Crithidia fasciculata. Immunofluorescent labelling with an antibody raised against plant fibrillar bundles (AFB) and Western blotting with an antibody that cross-reacts with a broad range of IFs (anti-IFA) as well as with fibrillar bundles, indicates that these filaments appear to share antigenic determinants common to animal IFs and to fibrillar bundles of plant origin.Abbreviations AFB anti-fibrillar bundle antibody - anti-IFA anti-intermediate filament antibody - IF intermediate filament - SEM scanning electron microscope - TEM transmission electron microscope - YOL 1/34 anti--tubulin antibody     

Ultrastructural study of crystalloids in Sertoli cells of the three-toed sloth (Bradypus tridactylus)

Summary Crystalloids were found in Sertoli cells of the testis of the three-toed sloth by examination at the lightand electron-microscopic levels. Needle-, or spindle-shaped crystalloids, varying in length, were located in the basal part of the Sertoli cells. They consisted of bundles of filaments each measuring ~ 11 nm in diameter. Several filaments were packed hexagonally to form a bundle. The center-to-center distance between individual filaments of a bundle was ~ 17 nm. Periodical lateral projections emanated from the filaments. Cross sections of crystalloids showed that the projections radiated from each filament in three directions, forming an equilateral triangle with a side length of ~ 15 nm. Scattered polyribosomes were found between and around the bundles.     

Intermediate filaments,microtubules and microfilaments in epidermis of sea urchin tube foot

Summary Tube foot epidermal cells of the sea urchin Strongylocentrotus purpuratus were examined by transmission electron microscopy and fluorescence microscopy to identify the chemical nature of prominent bundles of cytoplasmic filaments. Cross sections revealed filaments of roughly 7–8 nm in diameter closely packed into dense bundles. These bundles, in turn, were each surrounded by a loose sheath of microtubules. The filament size and negative reaction with the fluorescent F-actin binding drug NBD-phallacidin indicated that they were not actin. Indirect immunofluorescence microscopy of whole tissues and frozen sections revealed a strong reaction of the filaments with a monoclonal antibody prepared against porcine stomach desmin. In SDS-polyacrylamide gels of whole tube foot protein, a band of apparent molecular weight around 50 000 daltons reacted with the anti-desmin monoclonal antibody. The combined data provide evidence that the epidermal filament bundles are related to vertebrate intermediate filaments, but further biochemical studies will be necessary to assign them to a particular class of filament proteins.     

Nonuniform distribution of myosin light chains within the thick filaments of lobster slow muscle: Immunocytochemical study.

The in situ distribution of the alpha and beta myosin light chains was investigated at the subsarcomeric and subfilament levels in individual fibers of the superficial flexor muscle (SFM) of the lobster, Homarus americanus. Polyclonal antibodies were produced against the two classes of myosin light chains and used for subsequent immunolocalization on thin sections of sarcomeres and on isolated filaments from both the medial and lateral fiber bundles of the SFM. The beta myosin light chains were uniformly distributed within the crossbridge region of sarcomeres of both medial and lateral bundles. The alpha myosin light chains were uniformly distributed within the crossbridge region of sarcomeres from the medial bundle, but were nonuniformly distributed over the crossbridge region of lateral bundle sarcomeres. In the latter, the number of alpha myosin light chains was highest toward the center of the thick filaments, diminishing towards the ends. Similar distributions of alpha light chains were found in isolated myosin filaments. These data demonstrate that heterogeneity in protein composition extends to the level of the myosin filament and suggest that the myosin filament substructure in lobster may be different than that found in vertebrate skeletal muscle.