Ag(I)-cysteamine complex based electrochemical stripping immunoassay: ultrasensitive human IgG detection

An ultrasensitive electrochemical immunosensor for a protein using a Ag (I)-cysteamine complex (Ag-Cys) as a label was fabricated. The low detection of a protein was based on the electrochemical stripping of Ag from the adsorbed Ag-Cys complex on the gold nanoparticles (AuNPs) conjugated human immunoglobulin G (anti-IgG) antibody (AuNPs-anti-IgG). The electrochemical immunosensor was fabricated by immobilizing anti-IgG antibody on a poly-5,2':5',2'-terthiophene-3'-carboxylic acid (polyTTCA) film grown on the glassy carbon electrode through the covalent bond formation between amine groups of anti-IgG and carboxylic acid groups of polyTTCA. The target protein, IgG was sandwiched between the anti-IgG antibody that covalently attached onto the polyTTCA layer and AuNPs-anti-IgG. Using square wave voltammetry, well defined Ag stripping voltammograms were obtained for the each target concentration. Various experimental parameters were optimized and interference effects from other proteins were checked out. The immunosensor exhibited a wide dynamic range with the detection limit of 0.4 ± 0.05 fg/mL. To evaluate the analytical reliability, the proposed immunosensor was applied to human IgG spiked serum samples and acceptable results were obtained indicating that the method can be readily extended to other bioaffinity assays of clinical or environmental significance.     

Amperometric immunosensor for the determination of IgA deficiency in human serum samples

An electrochemical immunosensor for the detection of human IgA deficiency in real human blood serum has been developed. The performance of the immunosensor presents a large but sensitive dynamic range that allows the determination of non-deficient IgA levels (>70 μg/mL) as well as of severe IgA deficiencies (0.5-5.0 μg/mL). The assay architecture involves the immobilisation of a coating antibody on an electrode surface using carboxylic-ended bipodal alkane-thiol self-assembled monolayers (SAMs). The long chain bipodal SAM presents intercalated poly(ethylenglycol) groups that confer the immunosensor the ability to retain its optimum performance in very complex matrices and serum with negligible non-specific adsorption phenomena. Amperometric optimisation of the assay resulted in limits of detection of 142 ng/mL in just 30 min total assay time. Real patients' serum samples were analysed using the developed electrochemical immunosensor demonstrating an excellent correlation in terms of sensitivity and reproducibility compared with standard enzyme linked immunosorbent assays (ELISA).     

Layer-by-layer assembly of chemical reduced graphene and carbon nanotubes for sensitive electrochemical immunoassay

In this work, uniform and stable multi-walled carbon nanotubes (MWCT) and chemically reduced graphene (GR) composite electrode interface was fabricated by using layer-by-layer assembly method. The performances of these GR-MWCT assembled electrode interfaces were studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). It was demonstrated that the assembled composite film significantly improved the interfacial electron transfer rate compared with that of GR or MWCT modified electrode. Based on the GR-MWCT assembled interface, a sandwich-type electrochemical immunosensor was constructed using human IgG as a model target. In this assay, human IgG was fixed as the target antigen, the HRP-conjugated IgG as the probing antibody and hydroquinone as the electron mediator. The detection limit of the immunosensor was 0.2 ng mL(-1) (signal-to-noise ratio of 3). A good linear relationship between the current signals and the concentrations of Human IgG was achieved from 1 ng mL(-1) to 500 ng mL(-1). Moreover, this electrochemical immunosensor exhibited excellent selectivity, stability and reproducibility, and can be used to accurately detect IgG concentration in human serum samples. The results suggest that the electrochemical immunosensor based on GR-MWCT assembled composite will be promising in the point-of-care diagnostics application of clinical screening of multiple diseases.     

Epitope mapping of the N‐terminal portion of tissue transglutaminase protein antigen to identify linear epitopes in celiac disease

Celiac disease (CD) is an autoimmune mediated disease with complex and multifactorial etiology. Gluten intake triggers a composite immune response involving T‐cells and B‐cells and leading to the secretion of autoantibodies if a genetic predisposition is present. Untreated CD patients show high levels of circulating autoantibodies directed to different auto‐antigens present in the intestinal mucosa. The most important auto‐antigen is the endomysial enzyme tissue transglutaminase (tTG). Both IgA and IgG antibody isotypes to tTG are known, but only the IgA antibodies demonstrate the highest disease specificity and thus are considered disease biomarkers. Because the pathogenicity and exact tTG binding properties of these autoantibodies are still unclear, the characterization of tTG antigenic domains is a crucial step in understanding CD onset and the autoimmune pathogenesis. Overlapping peptide libraries can be used for epitope mapping of selected protein portions to determine antigenic fragments contributing to the immunological activity and possibly develop innovative peptide‐based tools with high specificity and sensitivity for CD. We performed an epitope mapping study to characterize putative linear auto‐antigenic epitopes present in the tTG N‐terminal portion (1–230). A library of 23 overlapping peptides spanning tTG(1–230) was generated by Fmoc/tBu solid‐phase peptide synthesis and screened by immunoenzymatic assays employing patients' sera. The results indicate that four synthetic peptides, that is, Ac‐tTG(1–15)‐NH₂, Ac‐tTG(41–55)‐NH₂, Ac‐tTG(51–65)‐NH₂, and Ac‐tTG(151–165)‐NH₂, are recognized by IgA autoantibodies circulating in CD patients' sera. These results offer important insight on the nature of the antigen‐antibody interaction. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Horseradish peroxidase-functionalized gold nanoparticle label for amplified immunoanalysis based on gold nanoparticles/carbon nanotubes hybrids modified biosensor

This paper describes the combination of electrochemical immunosensor using gold nanoparticles (GNPs)/carbon nanotubes (CNTs) hybrids platform with horseradish peroxidase (HRP)-functionalized gold nanoparticle label for the sensitive detection of human IgG (HIgG) as a model protein. The GNPs/CNTs nanohybrids covered on the glass carbon electrode (GCE) constructed an effective antibody immobilization matrix and made the immobilized biomolecules hold high stability and bioactivity. Enhanced sensitivity was obtained by using bioconjugates featuring HRP labels and secondary antibodies (Ab₂) linked to GNPs at high HRP/Ab₂ molar ratio. The approach provided a linear response range between 0.125 and 80 ng/mL with a detection limit of 40 pg/mL. The immunosensor showed good precision, acceptable stability and reproducibility and could be used for the detection of HIgG in real samples, which provided a potential alternative tool for the detection of protein in clinical laboratory.     

Graphene-assisted dual amplification strategy for the fabrication of sensitive amperometric immunosensor

A sensitive electrochemical immunosensor with graphene-assisted signal amplification has been developed. In order to construct the base of the immunosensor, a novel hybrid architecture was initially fabricated by combining poly (diallyldimethylammonium chloride) functionalized graphene nanosheets (PDDA-G) and gold nanoparticles (AuNPs) via a simple sonication-induced assembly. The formed hybrid architecture provided an effective matrix for antibody immobilization with good stability and bioactivity. Subsequently, a smart, multilabel, and graphene-based nanoprobe that contains gold nanoparticles functionalized exfoliated graphene oxide and horseradish peroxidase-secondary antibodies was designed for constructing a novel sandwiched electrochemical immunosensor. Enhanced sensitivity was obtained by combining the advantages of high-binding capability and excellent electrical conductivity of hybrid architecture with the multilabel signal amplification. On the basis of the dual signal amplification strategy of graphene-based architecture and the multilabel, the immunosensor displayed excellent analytical performance for the detection of human IgG (HIgG) range from 0.1 to 200 ng/mL with a detection limit of 0.05 ng/mL at 3σ. Moreover, the proposed method showed good precision, acceptable stability and reproducibility, and could be used for the detection of HIgG in real samples. Therefore, the present strategy definitely paves a way for the wide application of graphene in clinical research.     

An electrochemical immunosensor for digoxin using core–shell gold coated magnetic nanoparticles as labels

A simple, sensitive, and low-cost immunosensor was designed for the detection of digoxin through core–shell gold coated magnetic nanoparticles (Fe₃O₄-Au-NPs) as an electrochemical label. Having had such a large potential for a variety of applications, Fe₃O₄-Au-NPs have attracted a considerable attention and are actively investigated recently. Digoxin is a cardiac glycoside which, at high level, can indicate an increased risk of toxicity. This new competitive electrochemical immunosensor was developed based on antigen–antibody reaction employing antigen (Ag) labeled Fe₃O₄-Au-NPs and PVA modified screen-printed carbon electrode surface in order to detect the serum digoxin. The structures of Fe₃O₄-Au-NPs were studied by transmission electron microscopy, X-ray diffraction and Fourier transformed infrared spectroscopy. Cyclic voltammetry and differential pulse voltammetry (DPV) were employed to determine the physicochemical and electrochemical properties of immunosensor. DPV was employed for quantitative detection of digoxin in biological samples. The developed immunosensor was capable to detect digoxin in the range from 0.5 to 5 ng mL^?1, with a detection limit as low as 0.05 ng mL^?1. The proposed method represented acceptable reproducibility, stability, and reliability for the rapid detection of digoxin in serum samples.     

A novel electrochemical immunosensor based on ordered Au nano-prickle clusters

In this paper, we report a kind of ordered 3D Au nano-prickle clusters by directly electrodeposited on glassy carbon electrode utilizing the spatial obstruction/direction of the polycarbonate membrane. The proposed 3D nanoclusters are applied to fabricate a sandwich-type electrochemical immunosensor with human IgG as a model analyte. The electrodeposited Au nanoclusters build direct electrical contact and immobilization interface for protein molecules, which do not need post-modification and positioning. Scanning electron microscopy, cyclic voltammetry and alternating current impedance spectroscopy were used to investigate the properties of the modified interface. The deposited Au nanoclusters are stable with good biocompatibility, large specific surface area and high electron exchange capability. Under the optimized experimental conditions, a wide linear range from 1.0 to 10000.0 ng/mL was reached with a detection limit of 0.5 ng/mL. The calibration curve fits a second-order polynomial equation very well (R(2)=0.9914). The developed immunosensor based on Au nano-prickle clusters possesses advantages such as simple fabrication, fast response, low detection limit, wide linear range, easy regeneration, excellent reproducibility and long stability. To our knowledge, the Au nanostructure of special ordered 3D nano-prickle clusters is new for electrochemical immunosensor.     

Label-free electrochemical immunosensor for the determination of fetoprotein based on core-shell-shell nanocomposite particles

A new approach toward the development of advanced immunosensors based on chemically functionalized core-shell-shell magnetic nanocomposite particles, and the preparation, characteristics, and measurement of relevant properties of the immunosensor useful for the detection of alpha-1-fetoprotein (AFP) in clinical immunoassays. The core-shell NiFe2O4/3-aminopropyltriethoxysilance (APTES) (NiFe2O4@APTES) was initially prepared by covalent conjugation, then gold nanoparticles were adsorbed onto the surface of NiFe2O4@APTES, and then anti-AFP molecules were conjugated on the gold nanoparticles. The core-shell-shell nanocomposite particles not only had the properties of magnetic nanoparticles, but also provided a good biocompatibility for the immobilization of biomolecules. The core-shell-shell nanostructure present good magnetic properties to facilitate and modulate the way it was integrated into a carbon paste. The analytical performance of the immunosensor was investigated by using an electrochemical method. Under optimal conditions, the resulting composite presents good electrochemical response for the detection of AFP, and exhibits wide linear range from 0.9 to 110 ng/mL AFP with a detection limit of 0.5 ng/mL. Moreover, the proposed immunosensors were used to analyze AFP in human serum specimens. Analytical results, obtained for the clinical serum specimen by the developed immunosensor, were in accordance with those assayed by the standard ELISA. Importantly, the proposed immunoassay system could be further developed for the immobilization of other antigens or biocompounds.     

Ultrasensitive electrochemical immunosensor based on Au nanoparticles dotted carbon nanotube-graphene composite and functionalized mesoporous materials

A facile and sensitive electrochemical immunosensor for detection of human chorionic gonadotrophin (hCG) was designed by using functionalized mesoporous nanoparticles as bionanolabels. To construct high-performance electrochemical immunosensor, Au nanoparticles (AuNPs) dotted carbon nanotubes (MWCNTs)-graphene composite was immobilized on the working electrode, which can increase the surface area to capture a large amount of primary antibodies (Ab(1)) as well as improve the electronic transmission rate. The as-prepared bionanolabels. composed of mesoporous silica nanoparticles (MCM-41) coated with AuNPs through thionine linking, showed good adsorption of horseradish peroxidase-labeled secondary anti-hCG antibody. Interlayer thionine was not only a bridging agent between MCM-41 and AuNPs but also an excellent electron mediator. The approach provided a good linear response range from 0.005 to 500 mIU mL(-1) with a low detection limit of 0.0026 mIU mL(-1). The immunosensor showed good precision, acceptable stability and reproducibility. Satisfactory results were obtained for determination of hCG in human serum samples. The proposed method provides a new promising platform of clinical immunoassay for other biomolecules.     

Electrochemical immunoassay for carcinoembryonic antigen based on signal amplification strategy of nanotubular mesoporous PdCu alloy

Interests in using nanoporous metals for biosensing applications have been increasing. Herein, nanotubular mesoporous PdCu (NM-PdCu) alloy is used to fabricate a novel label-free electrochemical immunosensor for cancer biomarker carcinoembryonic antigen (CEA). It operates through physisorption of anti-CEA on NM-PdCu and the mixture of sulfonated graphene sheets (HSO(3)-GS) and thionine (TH) functionalized glassy carbon electrode interface as the detection platform. In this study, chitosan (CS)-PdCu is bound very strongly to carcinoembryonic antibody (anti-CEA), because of the good electron conductivity, high surface area, and good biocompatibility. CS-PdCu is immobilized on electrodes by electrostatic interactions between the negatively charged sulfo group of HSO(3)-GS and the abundant positively charged amino groups of chitosan. TH acts as the redox probe. Under the optimized conditions, the electrochemical immunosensor exhibits a wide working range from 0.01 to 12 ng/mL with a low detection limit of 4.86 pg/mL. The accuracy, reproducibility, and stability of the immunosensor are acceptable. The assay is evaluated for real serum samples, receiving satisfactory results. The nanoporous metal materials-based immunoassay provides a promising approach in clinical application and thus represents a versatile detection method.     

A carbon nanotube-based high-sensitivity electrochemical immunosensor for rapid and portable detection of clenbuterol

Carbon nanotubes have shown their unique advantages of mechanical, chemical and electronic properties in bioanalysis. We herein report a new method to efficiently and reproducibly prepare multi-walled carbon nanotubes (MWNTs)-protein sensing layers for electrochemical immunosensors. This method employs centrifugation to prepare a conjugate of MWNTs and goat anti mouse-immunoglobulin G (IgG) (secondary antibody). The conjugates were then deposited on screen-printed electrodes to form a nanostructured layer (MWNT-I layer). CLB monoclonal antibody was assembled through its binding to the secondary antibody. The MWNT-I layer-based electrodes were used for rapid and sensitive amperometric immunosensing detection of clenbuterol (CLB) in swine urine samples. Horseradish peroxidase-coupled CLB (CLB-HRP) competed with free CLB in the samples to bind the monoclonal antibody. It has shown significantly higher sensitivity and better reproducibility than the chemical conjugation method. This MWNT-based immunosensor is highly sensitive, leading to a limit of detection of 0.1 ng/mL within a rapid assay time of 16 min. Its sensitivity is at least 1 order of magnitude higher than that of a normal immunosensor (without MWNTs). The sensing device is portable with disposable screen-printed electrode, satisfactorily meeting the requirements for field detection of food security-related species.     

A signal-amplified electrochemical immunosensor for aflatoxin B1 determination in rice

A sensitive and simple electrochemical immunosensor based on enzymatic silver deposition amplification was constructed for the detection of aflatoxin B₁ (AFB₁) in rice. The immunosensor was based on an indirect competitive format between free AFB₁ and aflatoxin B₁-bovine serum albumin (AFB₁-BSA) conjugate immobilized on the electrode surface for binding to a fixed amount of anti-AFB₁ antibody. Then the alkaline phosphatase (ALP)-labeled anti-mouse immunoglobulin G (IgG) secondary antibody was bound to the electrode surface through reaction with primary antibody. Finally, ALP catalyzed the substrate, ascorbic acid 2-phosphate, into ascorbic acid that reduced silver ions in solution to metal silver deposited onto the electrode surface. Linear sweep voltammetry was carried out to quantify the metal silver, which indirectly reflected the amount of the analyte. The experimental parameters, such as the dilution ratio of antibody and the concentration of AFB₁-BSA conjugate, have been evaluated and optimized. At the optimal conditions, the working range of the electrochemical immunosensor was from 0.1 to 10 ng/ml with a detection limit of 0.06 ng/ml. Good recoveries were obtained for the detection of spiked rice samples. So, the proposed method in this article could find a good use for screening AFB₁ in real samples.     

Jacalin interaction with human immunoglobulin A1 and bovine immunoglobulin G1: affinity constant determined by piezoelectric biosensoring

The affinity of the D-galactose-binding lectin from Artocarpus heterophyllus lectin, known as jacalin, with immonuglobulins (Igs) was determined by biofunctionalization of a piezoelectric transducer. This piezoelectric biofunctionalized transducer was used as a mass-sensitive analytical tool, allowing the real-time binding analysis of jacalin-human immunoglobulin A1 (IgA(1)) and jacalin-bovine IgG(1) interactions from which the apparent affinity constant was calculated. The strategy was centered in immobilizing jacalin on the gold electrode's surface of the piezoelectric crystal resonator using appropriate procedures based on self-assembling of 11-mercaptoundecanoic acid and 2-mercaptoethanol thiol's mixture, a particular immobilization strategy by which it was possible to avoid cross-interaction between the proteins over electrode's surface. The apparent affinity constants obtained between jacalin-human IgA(1) and jacalin-bovine IgG(1) differed by 1 order of magnitude [(8.0 ± 0.9) 10(5) vs (8.3 ± 0.1) 10(6) L mol(-1)]. On the other hand, the difference found between human IgA(1) and human IgA(2) interaction with jacalin, eight times higher for IgA(1), was attributed to the presence of O-linked glycans in the IgA(1) hinge region, which is absent in IgA(2). Specific interaction of jacalin with O-glycans, proved to be present in the human IgA(1) and hypothetically present in bovine IgG(1) structures, is discussed as responsible for the obtained affinity values.     

Electrochemical immunosensor detection of antigliadin antibodies from real human serum

The determination of antigliadin antibodies from human serum samples is of vital importance for the diagnosis of an autoimmune disease such as celiac disease. An electrochemical immunosensor that mimics traditional ELISA type architecture has been constructed for the detection of antigliadin antibodies with control over the orientation and packing of gliadin antigen molecules on the surface of gold electrodes. The orientation of the antigen on the surface has been achieved using a carboxylic-ended bipodal alkanethiol that is covalently linked with amino groups of the antigen protein. The bipodal thiol presents a long poly(ethyleneglycol)-modified chain that acts as an excellent non-specific adsorption barrier. The bipodal nature of the thiol ensured a good spacing and hence good diffusion properties of electroactive species through the self-assembled monolayer, which is vital for the efficiency of the constructed electrochemical immunosensor. The electrochemical immunosensor was characterized using surface plasmon resonance as well as electrochemical impedance spectroscopy. Amperometric evaluation of the sensor with polyclonal antigliadin antibodies showed stable and reproducible low limits of detection (46 ng/mL; % RSD = 8.2, n = 5). The behaviour and performance of the electrochemical immunosensor with more complex matrixes such as reference serum solutions and real patient samples was evaluated and compared with commercial ELISA kits demonstrating an excellent degree of correlation in thirty minutes total assay time; the electrochemical immunosensor not only delivers a positive or negative result, it allows the estimation of semi-quantitative antibody contents based on the comparison against clinical reference solutions.     

Carbon nanotube-based ultrasensitive multiplexing electrochemical immunosensor for cancer biomarkers

A multiplexing electrochemical immunosensor was developed for ultrasensitive detection of cancer related protein biomarkers. We employed disposable screen-printed carbon electrode (SPCE) array as the detection platform. A universal multi-labeled nanoprobe was developed by loading HRP and goat-anti-rabbit IgG (secondary antibody, Ab₂) onto multiwalled carbon nanotube (MWNT). This universal nanoprobe was available for virtually any sandwich-based antigen detection and showed superiority in several areas. By using the SPCE array and the universal nanoprobe, we could detect as low as 5 pg mL⁻¹ of prostate specific antigen (PSA) and 8 pg mL⁻¹ of Interleukin 8 (IL-8) with the electrochemical immunosensor. We also demonstrated simultaneous detection of two protein biomarkers with this platform. With these attracted features, our immunoassay system shows promising applications for in-field and point-of-care test in clinical diagnostics.     

A disposable two-throughput electrochemical immunosensor chip for simultaneous multianalyte determination of tumor markers

A disposable two-throughput immunosensor array was proposed for simultaneous electrochemical determination of tumor markers. The low-cost immunosensor array was fabricated simply using cellulose acetate membrane to co-immobilize thionine as a mediator and two kinds of antigens on two carbon electrodes of a screen-printed chip, respectively. With two simultaneous competitive immunoreactions the corresponding horseradish peroxidase (HRP) labeled antibodies were captured on the membranes, respectively, on which the immobilized thionine shuttled electrons between HRP and the electrodes for enzymatic reduction of H2O2 to produce detectable signals. The electrochemical and electronic cross-talks between the electrodes could be avoided, which was beneficial to the miniaturization of the array without considering the distance between immunosensors. Under optimal conditions the immunosensor array could be used for fast simultaneous electrochemical detection of CA 19-9 and CA 125 with the limits of detection of 0.2 and 0.4 U/ml, respectively. The serum samples from clinic were assayed with the proposed method and the results were in acceptable agreement with the reference values. The proposed method for preparation of immunosensor array could be conveniently used for fabrication of disposable electrochemical biochip with high throughput and possessed the potential of mass production and commercialization.     

Integrated microfluidic systems with an immunosensor modified with carbon nanotubes for detection of prostate specific antigen (PSA) in human serum samples

This paper describes the development of an immunosensor coupled to glassy carbon electrode (GCE) modified with multiwall carbon nanotubes (MWCNT) (CNT-GCE) integrated with microfluidic systems for rapid and sensitive quantification of prostate specific antigen (PSA) in human serum samples. Mouse monoclonal (5G6) to PSA antibodies were immobilized on a rotating disk. PSA in the serum sample are allowed to react immunologically with the immobilized anti-tPSA and horseradish peroxidase (HRP) enzyme-labeled second antibodies specific to PSA. HRP, in the presence of hydrogen peroxide (H(2)O(2)) catalyzes the oxidation of 4-tert-butylcatechol (4-TBC), whose back electrochemical reduction was detected on CNT-GCE at -0.15 V. The electrochemical detection can be done within 1 min and total assay time was 30 min. The calculated detection limits for electrochemical detection and the ELISA procedure are 0.08 and 0.5 microg L(-1), respectively and the intra- and inter-assay coefficients of variation were below 4.5%. The electrochemical immunosensor showed higher sensitivity and lower time consumed than the standard spectrophotometric detection ELISA method, which shows potential for detecting PSA in clinical diagnosis.     

Direct immobilization of antibodies on a new polymer film for fabricating an electrochemical impedance immunosensor

A new polymer bearing aldehyde groups was designed and synthesized by grafting 4-pyridinecarboxaldehyde onto poly(epichlorohydrin). Antibodies can be directly immobilized on the surface of the polymer film through the covalent bonding of aldehyde groups of the film with amino groups of antibodies. In this study, human immunoglobulin G (IgG) was used as a model analyte for the fabrication of an electrochemical impedance immunosensor. Using the proposed immunosensor, IgG in the range from 0.1 to 80 ng ml⁻¹ was detected with a detection limit of 0.07 ng ml⁻¹ (signal/noise [S/N] = 3). In addition, the electrochemical impedance immunosensor displays good stability and reproducibility.