Disruption of Putrescine Biosynthesis in Shewanella oneidensis Enhances Biofilm Cohesiveness and Performance in Cr(VI) Immobilization

Although biofilm-based bioprocesses have been increasingly used in various applications, the long-term robust and efficient biofilm performance remains one of the main bottlenecks. In this study, we demonstrated that biofilm cohesiveness and performance of Shewanella oneidensis can be enhanced through disrupting putrescine biosynthesis. Through random transposon mutagenesis library screening, one hyperadherent mutant strain, CP2-1-S1, exhibiting an enhanced capability in biofilm formation, was obtained. Comparative analysis of the performance of biofilms formed by S. oneidensis MR-1 wild type (WT) and CP2-1-S1 in removing dichromate (Cr₂O₇²⁻), i.e., Cr(VI), from the aqueous phase showed that, compared with the WT biofilms, CP2-1-S1 biofilms displayed a substantially lower rate of cell detachment upon exposure to Cr(VI), suggesting a higher cohesiveness of the mutant biofilms. In addition, the amount of Cr(III) immobilized by CP2-1-S1 biofilms was much larger, indicating an enhanced performance in Cr(VI) bioremediation. We further showed that speF, a putrescine biosynthesis gene, was disrupted in CP2-1-S1 and that the biofilm phenotypes could be restored by both genetic and chemical complementations. Our results also demonstrated an important role of putrescine in mediating matrix disassembly in S. oneidensis biofilms.     

Community structure and function in a H2-based membrane biofilm reactor capable of bioreduction of selenate and chromate

Two different H₂-based, denitrifying membrane-biofilm reactors (MBfRs) initially reduced Se(VI) or Cr(VI) stably to Se⁰ or Cr(III). When the oxidized contaminants in the influent were switched, each new oxidized contaminant was reduced immediately, and its reduction soon was approximately the same or greater than it had been in its original MBfR. The precipitation of reduced selenium and chromium in the biofilm was verified by scanning electron microscopy and energy dispersive X-ray analysis. These results on selenate and chromate reduction are consistent with the interpretation that the H₂-based biofilm community had a high level of functional diversity. The communities’ structures were assessed by cloning analysis. Dechloromonas spp., a known perchlorate-reducing bacteria, dominated the clones from both reactors during selenate and chromate reductions, which suggests that it may have functional diversity capable of reducing selenate and chromate as secondary and dissimilatory acceptors.     

Using non‐invasive magnetic resonance imaging (MRI) to assess the reduction of Cr(VI) using a biofilm–palladium catalyst

Industrial waste streams may contain contaminants that are valuable like Pd(II) and/or toxic and mutagenic like Cr(VI). Using Serratia sp. biofilm the former was biomineralized to produce a supported nanocrystalline Pd(0) catalyst, and this biofilm–Pd heterogeneous catalyst was then used to reduce Cr(VI) to less dangerous Cr(III) at room temperature, with formate as the electron donor. Cr(VI)_(aq) is non‐paramagnetic while Cr(III)_(aq) is paramagnetic, which enabled spatial mapping of Cr species concentrations within the reactor cell using non‐invasive magnetic resonance (MR) imaging experiments. Spatial reactivity heterogeneities were thus examined. In batch reactions, these could be attributed primarily to heterogeneity of Pd(0) distribution and to the development of gas bubbles within the reactor. In continuous flow reactions, spatial reactivity heterogeneities resulted primarily from heterogeneity of Cr(VI) delivery. Biotechnol. Bioeng. 2010;107: 11–20. © 2010 Wiley Periodicals, Inc.     

Biofilm form and function: carbon availability affects biofilm architecture, metabolic activity and planktonic cell yield

Aims: To investigate carbon transformation by biofilms and changes in biofilm architecture, metabolic activity and planktonic cell yield in response to fluctuating carbon availability. Methods and Results: Pseudomonas sp. biofilms were cultured under alternating carbon‐replete and carbon‐limited conditions. A shift to medium without added carbon led to a 90% decrease in biofilm respiration rate and a 40% reduction in planktonic cell yield within 1 h. Attached cell division and progeny release were shown to contribute to planktonic cell numbers during carbon limitation. Development of a significantly enlarged biofilm surface area during carbon limitation facilitated a rapid increase in whole‐biofilm metabolic activity, cell yield and biomass upon the re‐introduction of carbon after 8 days of limitation. The cumulative number of planktonic cells (>10¹⁰ CFU) released from the biofilm during the cultivation period contained only 1·0% of the total carbon available to the biofilm, with 6·5% of the carbon retained in the biofilm and 54% mineralized to CO₂. Conclusions: Biofilm‐derived planktonic cell yield is a proliferation mechanism. The rapid response of biofilms to environmental perturbations facilitates the optimal utilization of resources to promote both proliferation and survival. Biofilms function as efficient catalysts for environmental carbon transformation and mineralization. Significance and Impact of the study: A greater understanding of the relationship between biofilm form and function can inform strategies intended to control and/or promote biofilm formation.     

A novel approach combining the Calgary Biofilm Device and Phenotype MicroArray for the characterization of the chemical sensitivity of bacterial biofilms

A rapid method for screening the metabolic susceptibility of biofilms to toxic compounds was developed by combining the Calgary Biofilm Device (MBEC device) and Phenotype MicroArray (PM) technology. The method was developed using Pseudomonas alcaliphila 34, a Cr(VI)-hyper-resistant bacterium, as the test organism. P. alcaliphila produced a robust biofilm after incubation for 16 h, reaching the maximum value after incubation for 24 h (9.4 × 10⁶ ± 3.3 × 10⁶ CFU peg^?1). In order to detect the metabolic activity of cells in the biofilm, dye E (5×) and menadione sodium bisulphate (100 μM) were selected for redox detection chemistry, because they produced a high colorimetric yield in response to bacterial metabolism (340.4 ± 6.9 Omnilog Arbitrary Units). This combined approach, which avoids the limitations of traditional plate counts, was validated by testing the susceptibility of P. alcaliphila biofilm to 22 toxic compounds. For each compound the concentration level that significantly lowered the metabolic activity of the biofilm was identified. Chemical sensitivity analysis of the planktonic culture was also performed, allowing comparison of the metabolic susceptibility patterns of biofilm and planktonic cultures.     

Experimental and Computational Investigation of Biofilm Formation by Rhodopseudomonas palustris Growth under Two Metabolic Modes

We examined biofilms formed by the metabolically versatile bacterium Rhodopseudomonas palustris grown via different metabolic modes. R. palustris was grown in flow cell chambers with identical medium conditions either in the presence or absence of light and oxygen. In the absence of oxygen and the presence of light, R. palustris grew and formed biofilms photoheterotrophically, and in the presence of oxygen and the absence of light, R. palustris grew and formed biofilms heterotrophically. We used confocal laser scanning microscopy and image analysis software to quantitatively analyze and compare R. palustris biofilm formation over time in these two metabolic modes. We describe quantifiable differences in structure between the biofilms formed by the bacterium grown heterotrophically and those grown photoheterotrophically. We developed a computational model to explore ways in which biotic and abiotic parameters could drive the observed biofilm architectures, as well as a random-forest machine-learning algorithm based on structural differences that was able to identify growth conditions from the confocal imaging of the biofilms with 87% accuracy. Insight into the structure of phototrophic biofilms and conditions that influence biofilm formation is relevant for understanding the generation of biofilm structures with different properties, and for optimizing applications with phototrophic bacteria growing in the biofilm state.     

Immobilization of Cr(VI) and Its Reduction to Cr(III) Phosphate by Granular Biofilms Comprising a Mixture of Microbes

We assessed the potential of mixed microbial consortia, in the form of granular biofilms, to reduce chromate and remove it from synthetic minimal medium. In batch experiments, acetate-fed granular biofilms incubated aerobically reduced 0.2 mM Cr(VI) from a minimal medium at 0.15 mM day⁻¹ g⁻¹, with reduction of 0.17 mM day⁻¹ g⁻¹ under anaerobic conditions. There was negligible removal of Cr(VI) (i) without granular biofilms, (ii) with lyophilized granular biofilms, and (iii) with granules in the absence of an electron donor. Analyses by X-ray absorption near edge spectroscopy (XANES) of the granular biofilms revealed the conversion of soluble Cr(VI) to Cr(III). Extended X-ray absorption fine-structure (EXAFS) analysis of the Cr-laden granular biofilms demonstrated similarity to Cr(III) phosphate, indicating that Cr(III) was immobilized with phosphate on the biomass subsequent to microbial reduction. The sustained reduction of Cr(VI) by granular biofilms was confirmed in fed-batch experiments. Our study demonstrates the promise of granular-biofilm-based systems in treating Cr(VI)-containing effluents and wastewater.Chromium is a common industrial chemical used in tanning leather, plating chrome, and manufacturing steel. The two stable environmental forms are hexavalent chromium [Cr(VI)] and trivalent chromium [Cr(III)] (20). The former is highly soluble and toxic to microorganisms, plants, and animals, entailing mutagenic and carcinogenic effects (6, 22, 33), while the latter is considered to be less soluble and less toxic. Therefore, the reduction of Cr(VI) to Cr(III) constitutes a potential detoxification process that might be achieved chemically or biologically. Microbial reduction of Cr(VI) seemingly is ubiquitous; Cr(VI)-reducing bacteria have been isolated from both Cr(VI)-contaminated and -uncontaminated environments (6, 7, 23, 38, 39). Many archaeal/eubacterial genera, common to different environments, reduce a wide range of metals, including Cr(VI) (6, 16, 21). Some bacterial enzymes generate Cr(V) by mediating one-electron transfer to Cr(VI) (1, 4), while many other chromate reductases convert Cr(VI) to Cr(III) in a single step.Biological treatment of Cr(VI)-contaminated wastewater may be difficult because the metal''s toxicity potentially can kill the bacteria. Accordingly, to protect the cells, cell immobilization techniques were employed (31). Cells in a biofilm exhibit enhanced resistance and tolerance to toxic metals compared with free-living ones (15). Therefore, biofilm-based reduction of Cr(VI) and its subsequent immobilization might be a satisfactory method of bioremediation because (i) the biofilm-bound cells can tolerate higher concentrations of Cr(VI) than planktonic cells, and (ii) they allow easy separation of the treated liquid from the biomass. Ferris et al. (11) described microbial biofilms as natural metal-immobilizing matrices in aqueous environments. Bioflocs, the active biomass of activated sludge-process systems are transformed into dense granular biofilms in sequencing batch reactors (SBRs). As granular biofilms settle extremely well, the treated effluent is separated quickly from the granular biomass by sedimentation (9, 24). Previous work demonstrated that aerobic granular biofilms possess tremendous ability for biosorption, removing zinc, copper, nickel, cadmium, and uranium (19, 26, 31, 32, 40). However, no study has investigated the role of cellular metabolism of aerobically grown granular biofilms in metal removal experiments. Despite vast knowledge about biotransformation by pure cultures, very little is known about reduction and immobilization by mixed bacterial consortia (8, 12, 13, 16, 20, 31, 36). Our research explored, for the first time, the metabolically driven removal of Cr(VI) by microbial granules.The main aim of this study was to investigate Cr(VI) reduction and immobilization by mixed bacterial consortia, viz., aerobically grown granular biofilms. Such biofilm-based systems are promising for developing compact bioreactors for the rapid biodegradation of environmental contaminants (17, 24, 29). Accordingly, we investigated the microbial reduction of Cr(VI) by aerobically grown biofilms in batch and fed-batch experiments and analyzed the oxidation state and association of the chromium immobilized on the biofilms by X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS).     

The effect of hydrodynamic conditions on the phenotype of Pseudomonas fluorescens biofilms

Abstract

This study investigated the phenotypic characteristics of monoculture P. fluorescens biofilms grown under turbulent and laminar flow, using flow cells reactors with stainless steel substrata. The cellular physiology and the overall biofilm activity, structure and composition were characterized, and compared, within hydrodynamically distinct conditions. The results indicate that turbulent flow-generated biofilm cells were significantly less extensive, with decreased metabolic activity and a lower protein and polysaccharides composition per cell than those from laminar flow-generated biofilms. The effect of flow regime did not cause significantly different outer membrane protein expression. From the analysis of biofilm activity, structure and composition, turbulent flow-generated biofilms were metabolically more active, had twice more mass per cm², and higher cellular density and protein content (mainly cellular) than laminar flow-generated biofilms. Conversely, laminar flow-generated biofilms presented higher total and matrix polysaccharide contents. Direct visualisation and scanning electron microscopy analysis showed that these different flows generate structurally different biofilms, corroborating the quantitative results. The combination of applied methods provided useful information regarding a broad spectrum of biofilm parameters, which can contribute to control and model biofilm processes.     

Enhanced Uranium Immobilization and Reduction by Geobacter sulfurreducens Biofilms

Biofilms formed by dissimilatory metal reducers are of interest to develop permeable biobarriers for the immobilization of soluble contaminants such as uranium. Here we show that biofilms of the model uranium-reducing bacterium Geobacter sulfurreducens immobilized substantially more U(VI) than planktonic cells and did so for longer periods of time, reductively precipitating it to a mononuclear U(IV) phase involving carbon ligands. The biofilms also tolerated high and otherwise toxic concentrations (up to 5 mM) of uranium, consistent with a respiratory strategy that also protected the cells from uranium toxicity. The enhanced ability of the biofilms to immobilize uranium correlated only partially with the biofilm biomass and thickness and depended greatly on the area of the biofilm exposed to the soluble contaminant. In contrast, uranium reduction depended on the expression of Geobacter conductive pili and, to a lesser extent, on the presence of the c cytochrome OmcZ in the biofilm matrix. The results support a model in which the electroactive biofilm matrix immobilizes and reduces the uranium in the top stratum. This mechanism prevents the permeation and mineralization of uranium in the cell envelope, thereby preserving essential cellular functions and enhancing the catalytic capacity of Geobacter cells to reduce uranium. Hence, the biofilms provide cells with a physically and chemically protected environment for the sustained immobilization and reduction of uranium that is of interest for the development of improved strategies for the in situ bioremediation of environments impacted by uranium contamination.     

Cr(VI) removal from aqueous solution by thermophilic denitrifying bacterium <Emphasis Type="Italic">Chelatococcus daeguensis</Emphasis> TAD1 in the presence of single and multiple heavy metals

Cr(VI) pollution is increasing continuously as a result of ongoing industrialization. In this study, we investigated the thermophilic denitrifying bacterium Chelatococcus daeguensis TAD1, isolated from the biofilm of a biotrickling filter used in nitrogen oxides (NO_X) removal, with respect to its ability to remove Cr(VI) from an aqueous solution. TAD1 was capable of reducing Cr(VI) from an initial concentration of 10 mg/L to non-detectable levels over a pH range of 7–9 and at a temperature range of 30–50°C. TAD1 simultaneously removed both Cr(VI) and NO₃^?-N at 50°C, when the pH was 7 and the initial Cr(VI) concentration was 15 mg/L. The reduction of Cr(VI) to Cr(III) correlated with the growth metabolic activity of TAD1. The presence of other heavy metals (Cu, Zn, and Ni) inhibited the ability of TAD1 to remove Cr(VI). The metals each individually inhibited Cr(VI) removal, and the extent of inhibition increased in a cooperative manner in the presence of a combination of the metals. The addition of biodegradable cellulose acetate microspheres (an adsorption material) weakened the toxicity of the heavy metals; in their presence, the Cr(VI) removal efficiency returned to a high level. The feasibility and applicability of simultaneous nitrate removal and Cr(VI) reduction by strain TAD1 is promising, and may be an effective biological method for the clean-up of wastewater.     

Paenibacillus lentimorbus enhances growth of chickpea (Cicer arietinum L.) in chromium-amended soil

Chromium (Cr), with its great economic importance in industrial use, is a major metal pollutant of the environment. It affects soil microbial activity and soil fertility, resulting in losses in yield of plants. Paenibacillus lentimorbus B-30488^r (B-30488^r) tolerated 200 μg ml⁻¹ of Cr under in vitro conditions and produced the plant growth promoting substance indole acetic acid in the presence of Cr. Our in vitro study indicates enhancement in B-30488^r biofilm formation by sodium alginate (SA) and calcium chloride (CaCl₂) both in absence and presence of supplemented Cr(VI) as compared to unsupplemented control. The plant growth promoting effects caused by the B-30488^r biofilm in rhizosphere of chickpea under Cr(VI) stress suggests a phytoprotective role of B-30488^r biofilm. Our study reflects the multifarious role of strain B-30488^r and presents it as a potent plant growth promoting and bioremediation agent useful in Cr-contaminated rhizosphere soil, whereby the SA and CaCl₂ induced B-30488^r biofilm on plant root acts as a shield in preventing the direct access of toxic Cr to plant tissues, thus reducing its uptake in plants.     

Tolerance to the antimicrobial peptide colistin in Pseudomonas aeruginosa biofilms is linked to metabolically active cells, and depends on the pmr and mexAB-oprM genes

Bacteria living as biofilm are frequently reported to exhibit inherent tolerance to antimicrobial compounds, and might therefore contribute to the persistence of infections. Antimicrobial peptides are attracting increasing interest as new potential antimicrobial therapeutics; however, little is known about potential mechanisms, which might contribute to resistance or tolerance development towards these compounds in biofilms. Here we provide evidence that a spatially distinct subpopulation of metabolically active cells in Pseudomonas aeruginosa biofilms is able to develop tolerance to the antimicrobial peptide colistin. On the contrary, biofilm cells exhibiting low metabolic activity were killed by colistin. We demonstrate that the subpopulation of metabolically active cells is able to adapt to colistin by inducing a specific adaptation mechanism mediated by the pmr operon, as well as an unspecific adaptation mechanism mediated by the mexAB-oprM genes. Mutants defective in either pmr -mediated lipopolysaccharide modification or in mexAB-oprM -mediated antimicrobial efflux were not able to develop a tolerant subpopulation in biofilms. In contrast to the observed pattern of colistin-mediated killing in biofilms, conventional antimicrobial compounds such as ciprofloxacin and tetracycline were found to specifically kill the subpopulation of metabolically active biofilm cells, whereas the subpopulation exhibiting low metabolic activity survived the treatment. Consequently, targeting the two physiologically distinct subpopulations by combined antimicrobial treatment with either ciprofloxacin and colistin or tetracycline and colistin almost completely eradicated all biofilm cells.     

Reduction and precipitation of chromate by mixed culture sulphate-reducing bacterial biofilms

The ability of sulphate-reducing bacterial biofilms to reduce hexavalent chromium (Cr(VI)) to insoluble Cr(III), a process of environmental and biotechnological significance, was investigated. The reduction of chromate to insoluble form has been quantified and the effects of chromate on the carbon source utilization and sulphate-reducing activity of the bacterial biofilms evaluated. Using lactate as the carbon/energy source and in the presence of sulphate, reduction of 500 micromol l-1 Cr(VI) was monitored over a 48-h period where 88% of the total chromium was removed from solution. Mass balance calculations showed that ca 80% of the total chromium was precipitated out of solution with the bacterial biofilm retaining less than 10% of the chromium. Only ca 12% of the chromate added was not reduced to insoluble form. Although Cr(VI) did not have a significant effect on C source utilization, sulphate reduction was severely inhibited by 500 micromol-1 Cr(VI) and only ca 10% of the sulphate reducing activity detected in control biofilms occurred in the presence of Cr(VI). Low levels of sulphide were also produced in the presence of chromate, with control biofilms producing over 10-times more sulphide than Cr(VI)-exposed biofilms. Sulphide- or other chemically-mediated Cr(VI) reduction was not detected. The biological mechanism of Cr(VI) reduction is likely to be similar to that found in other sulphate-reducing bacteria.     

Effect of Batch and Fed-Batch Growth Modes on Biofilm Formation by <Emphasis Type="Italic">Listeria monocytogenes</Emphasis> at Different Temperatures

The influence of Listeria monocytogenes (L. monocytogenes) biofilm formation feeding conditions (batch and fed-batch) at different temperatures on biofilm biomass and activity was determined. Biofilm biomass and cellular metabolic activity were assessed by Crystal Violet (CV) staining and 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide inner salt (XTT) colorimetric method, respectively. Live/Dead staining was also performed in order to get microscopic visualization of the different biofilms. Results revealed that at refrigeration temperature (4°C) a higher amount of biofilm was produced when batch conditions were applied, while at higher temperatures the fed-batch feeding condition was the most effective on biofilm formation. Moreover, independently of the temperature used, biofilms formed under fed-batch conditions were metabolically more active than those formed in batch mode. In conclusion, this work shows that different growth modes significantly influence L. monocytogenes biofilm formation on abiotic surfaces as well as the metabolic activity of cells within biofilms.     

EFFECT OF CHROMIUM(VI) ON PHOTOSYSTEM II ACTIVITY AND HETEROGENEITY OF SYNECHOCYSTIS SP. (CYANOPHYTA): STUDIED WITH IN VIVO CHLOROPHYLL FLUORESCENCE TESTS1

The inhibitory effect of Cr(VI) on the PSII of Synechocystis sp. was studied. Cr(VI) reduced O₂ evolution and inhibited the water‐splitting system in PSII. S‐states test and flash induction test showed that Cr(VI) exposure increased the proportion of inactivated PSII (PSII_X) and PSII_β reaction centers, which increased the fluxes of dissipated energy. JIP test and Q_A^? reoxidation test demonstrated that Cr(VI) treatment induces inhibition of electron transport from Q_A^? to Q_B/Q_B^? and accumulation of P₆₈₀⁺. More Q_A^? had to be oxidized through S₂(Q_AQ_B)^? charge recombination and oxidation by PQ9 molecules in PSII under Cr(VI) stress. These changes finally decreased the index of photosynthesis performance.     

Effects of zinc on microalgal biofilms in intertidal and subtidal habitats

Microalgal biofilms are sensitive to environmental conditions. Impacts of contaminants on assemblages of marine biofilm are often investigated in laboratories or in mesocosms. Such experiments are rarely representative of the effects of contaminants on biofilms under natural conditions. Studies in field situations, with enough power to detect impacts, are necessary to develop a better understanding of the effects of contaminants on ecological processes. Metals are a common contaminant of marine systems and can cause disturbances to assemblages. Using a new technique to experimentally deliver contaminants to microalgal assemblages, hypotheses were tested regarding the effects of zinc on microalgal biofilms growing on settlement panels in subtidal and intertidal habitats. PAM fluorometry was used to assess the amount and physiological state of biofilms on panels. Control panels deployed for 1 month in each habitat had significantly greater amounts of biofilm than those exposed to zinc. After deployment for 3 months, the results varied with location. The observed effects on the biofilm did not, however, cause significant changes in the macro-invertebrate assemblages that developed on the panels.     

Effects of zinc on microalgal biofilms in intertidal and subtidal habitats

Microalgal biofilms are sensitive to environmental conditions. Impacts of contaminants on assemblages of marine biofilm are often investigated in laboratories or in mesocosms. Such experiments are rarely representative of the effects of contaminants on biofilms under natural conditions. Studies in field situations, with enough power to detect impacts, are necessary to develop a better understanding of the effects of contaminants on ecological processes. Metals are a common contaminant of marine systems and can cause disturbances to assemblages. Using a new technique to experimentally deliver contaminants to microalgal assemblages, hypotheses were tested regarding the effects of zinc on microalgal biofilms growing on settlement panels in subtidal and intertidal habitats. PAM fluorometry was used to assess the amount and physiological state of biofilms on panels. Control panels deployed for 1 month in each habitat had significantly greater amounts of biofilm than those exposed to zinc. After deployment for 3 months, the results varied with location. The observed effects on the biofilm did not, however, cause significant changes in the macro-invertebrate assemblages that developed on the panels.     

Physiological heterogeneity in biofilms

Biofilms contain bacterial cells that are in a wide range of physiological states. Within a biofilm population, cells with diverse genotypes and phenotypes that express distinct metabolic pathways, stress responses and other specific biological activities are juxtaposed. The mechanisms that contribute to this genetic and physiological heterogeneity include microscale chemical gradients, adaptation to local environmental conditions, stochastic gene expression and the genotypic variation that occurs through mutation and selection. Here, we discuss the processes that generate chemical gradients in biofilms, the genetic and physiological responses of the bacteria as they adapt to these gradients and the techniques that can be used to visualize and measure the microscale physiological heterogeneities of bacteria in biofilms.     

In situ effective diffusion coefficient profiles in live biofilms using pulsed‐field gradient nuclear magnetic resonance

Diffusive mass transfer in biofilms is characterized by the effective diffusion coefficient. It is well documented that the effective diffusion coefficient can vary by location in a biofilm. The current literature is dominated by effective diffusion coefficient measurements for distinct cell clusters and stratified biofilms showing this spatial variation. Regardless of whether distinct cell clusters or surface‐averaging methods are used, position‐dependent measurements of the effective diffusion coefficient are currently: (1) invasive to the biofilm, (2) performed under unnatural conditions, (3) lethal to cells, and/or (4) spatially restricted to only certain regions of the biofilm. Invasive measurements can lead to inaccurate results and prohibit further (time‐dependent) measurements which are important for the mathematical modeling of biofilms. In this study our goals were to: (1) measure the effective diffusion coefficient for water in live biofilms, (2) monitor how the effective diffusion coefficient changes over time under growth conditions, and (3) correlate the effective diffusion coefficient with depth in the biofilm. We measured in situ two‐dimensional effective diffusion coefficient maps within Shewanella oneidensis MR‐1 biofilms using pulsed‐field gradient nuclear magnetic resonance methods, and used them to calculate surface‐averaged relative effective diffusion coefficient (D_rs) profiles. We found that (1) D_rs decreased from the top of the biofilm to the bottom, (2) D_rs profiles differed for biofilms of different ages, (3) D_rs profiles changed over time and generally decreased with time, (4) all the biofilms showed very similar D_rs profiles near the top of the biofilm, and (5) the D_rs profile near the bottom of the biofilm was different for each biofilm. Practically, our results demonstrate that advanced biofilm models should use a variable effective diffusivity which changes with time and location in the biofilm. Biotechnol. Bioeng. 2010;106: 928–937. © 2010 Wiley Periodicals, Inc.