Spectroscopic characterization of mononuclear, binuclear, and insoluble polynuclear oxovanadium(IV)-Schiff base complexes and their oxidation catalysis

The objective was to prepare mononuclear, binuclear, and insoluble polynuclear oxovanadium(IV)-Schiff base complexes and to use them for sulfoxidation and epoxidation of organic substrates. [VO(salen)] (complex 1) with tetradentate salen(salicylideneethylenediamine) being coordinated in the equatorial plane of oxovanadium(IV), [VO(salap)] (complex 2), and [(VO)₂(sal₂-dhdabp)] (complex 3) with tridentate salap(salicylideneorthoaminophenol) and sal₂-dhdabp(salicylidene-3,3^′-dihydroxy-4,4^′-diaminobiphenyl) being bound, respectively, in the equatorial plane, of which polynuclear complexes were constituted as monomer units, were prepared and spectroscopically characterized. A sulfide and olefins were oxidized by use of complexes 1 and 2 (mononuclear), complex 3 (binuclear), and the polynuclear complexes (poly-1 and poly-3) synthesized with 1 and 3, respectively. The reaction rates for poly-1 and -3 were a little lower than those of the corresponding 1 and 3. On oxidation of sulfides, poly-3 exhibited lowering of activity by about 15% in three cycles, while poly-1 showed significant lose of activity with each use. Poly-3 was efficient for the oxidation of the olefins only in the first cycle. It was suggested that the loss of activity depends not only on the coordination geometry of the oxovanadium complex, but also on the kind of the substrate.     

Activity of homobimetallic ruthenium alkylidene complexes on intermolecular [2+2+2] cyclotrimerisation reactions of terminal alkynes

The activity of homobimetallic ruthenium alkylidene complexes, [(p-cymene)Ru(Cl)(μ-Cl)₂Ru(Cl)(CHPh)(PCy₃)] [Ru-I] and [(p-cymene)Ru(Cl)(μ-Cl)₂Ru(Cl)(CHPh)(IPr)] [Ru-II], on intermolecular [2+2+2] cyclotrimerisation reactions of monoynes has been investigated for the first time. It was found that these complexes can catalyse the chemo and regioselective cyclotrimerisation reactions of alkynes at both 25 and 50 °C in polar, aprotic solvents. The catalytic activity of [Ru-I] and [Ru-II] was compared to other well-known ruthenium catalysts such as Grubbs first generation catalyst [RuCl₂(CHPh)(PCy₃)₂] [Ru-III], [RuCl(μ-Cl)(p-cymene)]₂ [Ru-IV] and [RuCl₂(p-cymene)PCy₃] [Ru-V] complexes. To examine the effect of the steric hinderance of substrates on the regioselectivity of the reaction, a series of sterically hindered silicon containing alkynes (1a, 1b, 1c) were used. It was shown that the isomeric product distribution of the reaction shifts from 1,2,4-trisubstituted arenes to 1,3,5-trisubstituted arenes as the steric hinderance on the substrates increases. These homobimetallic ruthenium alkylidene complexes also catalysed regio- and chemo-selective cross-cyclotrimerisation reactions between silicon-containing alkynes (1a, 1b, 1c) and aliphatic alkynes (1d-g).     

Synthesis, structure, and catalytic activity of chiral silver(I) and copper(II) complexes with biaryl-based nitrogen-containing ligands

A series of chiral Ag(I) and Cu(II) complexes have been prepared from the reaction between AgX (X = NO₃, PF₆, OTf) or CuX₂ (X = Cl, ClO₄) and chiral biaryl-based N-ligands. The rigidity of the ligand plays an important role in the Ag(I) complex formation. For example, treatment of chiral N₃-ligands 1-3 with half equiv of AgX (X = NO₃, PF₆, OTf) gives the chiral bis-ligated four-coordinated Ag(I) complexes, while ligand 4 affords the two-coordinated Ag(I) complexes. Reaction of AgX with 1 equiv of chiral N₄-ligands 5, 7, 8 and 10 gives the chiral, binuclear double helicate Ag(I) complexes, while chiral mono-nuclear single helicate Ag(I) complexes are obtained with N₄-ligands 6 and 9. Treatment of either N₃-ligand 1 or N₄-ligand 9 or 10 with 1 equiv of CuX₂ (X = Cl, ClO₄) gives the mono-ligated Cu(II) complexes. All the complexes have been characterized by various spectroscopic techniques, and elemental analyses. Seventeen of them have further been confirmed by X-ray diffraction analyses. The Cu(II) complexes do not show catalytic activity for allylation reaction, in contrast to Ag(I) complexes, but they do exhibit catalytic activity for Henry reaction (nitroaldol reaction) that Ag(I) complexes do not.     

A new organic-inorganic hybrid framework containing octahedral hexarhenium cluster and its transformation by ligand exchange

A new organic-inorganic hybrid solid with 3-D framework, [Mn(DMF)₃]₂[Re₆Se₈(CN)₆] (1), has been synthesized and transformed to [H][Mn(salen)]₃[Re₆Se₈(CN)₆] (2) by a ligand exchange. Hexarhenium chalcocyanide clusters are closest packed in cubic symmetry for 1 and rhombohedral symmetry for 2. The manganese complexes in the interstitial sites are three-coordinated to the rhenium cluster in 1 and two-coordinated in 2.     

Synthesis and structural characterization of iron(III) salen complexes possessing appended anionic oxygen donor ligands

The synthesis and solid-state characterization of iron(III) salen complexes bearing monodentate and bidentate anionic oxygen donor ligands are reported. The synthesis of Fe(salen)OPh (OPh=2,6-diphenylphenoxide) (1) was accomplished using Fe[N(Si(CH₃)₃)₂]₃ with one equivalent of H₂salen and the corresponding phenol. The complex was isolated as a crystalline sample by the slow diffusion of pentane into a concentrated solution of 1 at −20 °C. The solid-state structure of complex 1 reveals distorted square pyramidal geometry about the iron metal center. Alternatively the preparation of Fe(salen) complex 2 bearing the anionic, bidentate acetylacetonate ligand in the axial position was accomplished by thermally replacing two acetylacetonate ligands in Fe(acac)₃ with one equivalent of H₂salen. The complex was isolated and crystallographically characterized using X-ray quality crystals formed via the aforementioned protocol. The metal center adopts a very distorted octahedral geometry, indicating a preference for the square pyramidal species which is typical of other iron salen derivatives. Unfortunately, 1 and 2 were found to be inactive in the copolymerization of CO₂ and cyclohexene oxide to afford polycarbonate in the presence of a Lewis base (i.e., N-MeIm and PCy₃). The μ-[Fe(salen)]₂O (3) derivative was also isolated via the protonation of Fe(salen)(N(Si(CH₃)₃)₂). The complex is relatively air stable, forming large, dark crystals over a short period of time at −20 °C. The solid-state structure reveals a nearly linear Fe-O-Fe bond angle, which is due to the electronic repulsions associated with the sterically encumbering tert-butyl groups on the salen framework.     

Rhenium tricarbonyl complexes of 1-benzyl-4-(5-bipyridyl)-1H-1,2,3-triazoles

Copper(I) catalyzed [3+2] cycloaddition reactions between 5-ethynylbipyridine and benzyl, p-methylbenzyl, or m-bromobenzyl azides yields the corresponding 1-benzyl-4-(5-bipyridyl)-1H-1,2,3-triazoles 1-3. Reaction between 1-3 and [NEt₄]₂[Re(CO)₃Br₃] yields the [1-benzyl-4-(5-bipyridyl)-1H-1,2,3-triazole]Re(CO)₃Br complexes 4-6. The Re(CO)₃Br complexes of 5- and 6-ethynylbipyridine complexes (7-8) are prepared in a similar fashion. Cycloaddition reactions between 7 and benzyl azide yields mixtures of 4 and unreacted starting material.     

Syntheses, structures, and mesomorphism of a series of Ni(II) salen complexes with 4-substituted long alkoxy chains

A series of nickel(II) salen complexes containing 4-substituted alkoxy chains of aromatic rings, [Ni((4-C_nH_2n + 1O)₂salen)] (n = 3 (1), 4 (2), 6 (3), 8 (4), 10 (5), 12 (6), 14 (7), 16 (8), 18 (9), and 20 (10)), and their parent complex, [Ni((4-HO)₂salen)] (11) (salen = N,N′-ethylenebis(salicylideneiminato)), have been prepared and mesomorphic properties have been investigated. An X-ray crystallographic analysis revealed that complex 11 · 2DMF has one-dimensional stacking structure supported by the π-π interaction between the six-membered chelate and aromatic rings with the NiNi distances of alternatively 3.3957 and 3.7224 Å and that complex 3 is formed by one-dimensional stacking by weak CH?O type hydrogen bonded interaction between the five-membered chelate ring and phenoxo atoms of the dramatically distorted salen moieties with the NiNi distance of 5.994 Å. Complexes 1-6 did not exhibit any mesophases. On the other hand, complexes 7-10 with longer alkoxy chains of n = 14-20 showed an unusual metallomesogen of a lamello-columnar mesophase within the smectic layers with an interlamellar distance of 31.1 Å (7), 33.6 Å (8), 37.1 Å (9), and 39.5 Å (10) and nearly constant stacking distance of 6.19-6.24 Å between the inter-dimers, irrespective of the variation of the alkoxy chain lengths by the X-ray diffraction measurements of the liquid crystal. The relationship between molecular assemblies and mesomorphic properties is discussed.     

Synthesis and characterization of binuclear rhenium(I) complexes containing bifunctional ligands

The ligand exchange reaction of the anionic binuclear rhenium complexes (R = H (1), or Me (2)) has been studied with the bifunctional ligands 2-aminophenol (3), 4-hydroxypyridine (4), 3-hydroxybenzoic acid (5), and 3-pyridylcarbinol (6). The reactivity the pendant pyridyl group of 6 was studied in reactions with the Lewis acids ZnCl₂ (7), and AgPF₆ (8). Crystal structure determinations for several of these derivatives have been carried out which reveal both discrete and polymeric complexes upon addition of the Lewis base.     

Bimetallic complexes of porphyrinphenanthroline: Preparation and catalytic activities

Condensation of tetraphenylporphyrin-2,3-dione with 1,10-phenanthroline-5,6-diamine provided porphyrinphenanthroline (2) as the desired ligand. Metallation of the porphyrinic site of 2 with CoCl₂, NiCl₂, ZnCl₂ and CuCl₂ afforded the corresponding metal complexes [Co(2)] (8a), [Ni(2)] (8b), [Zn(2)] (8c) and [Cu(2)] (8d), respectively. Subsequent reactions of these metalloporphyrins with [(COD)PdCl₂] yielded the corresponding bimetallic complexes [Co/Pd (9a), Ni/Pd (9b), Zn/Pd (9c) and Cu/Pd (9d)] in high yields. The bimetallic complex 9e (Mg/Pd) was prepared directly by complexation of 2 with MgBr₂ and [(COD)PdCl₂]. All complexes were characterized by both spectroscopic and elemental analyses. In addition, crystal structure of 9c was determined to confirm its formulation. The use of these bimetallic complexes as pre-catalysts for Mizoroki-Heck coupling reaction has been examined.     

Structure, dynamics and catalytic activity of palladium(II) complexes with imidazole ligands

Several palladium complexes of the type [Pd(im)₂Cl₂], [Pd(im)₃Cl]Cl, and [Pd(im)₄]Cl₂ (im = imidazole 1, 1-methylimidazole 2, 1,2-dimethylimidazole 3, 1-butylimidazole 4, 4a, 1-phenylimidazole 6, 1-phenylimidazoline 7, and 1-methylimidazoline 8) were prepared and structurally characterized. The square planar structure of two new complexes with the composition [Pd(im)₄]Cl₂ (2b, 4b) was confirmed by X-ray analysis. In solution, exchange of imidazole ligands leading to heteroleptic products was evidenced by ESI-MS studies. Two bis-ligated complexes, bearing 1-methylimidazole (2a) and 1-propoxymethylimidazole (5) ligands, were obtained in the reaction of palladium with imidazoles formed by deprotection of one nitrogen atom in the respective imidazolium halides. Catalytic Suzuki-Miyaura reactions were carried out using the obtained palladium complexes in isopropanol-water solution. High yields of the cross-coupling products were obtained at 40 and 60 °C when 2-bromotoluene, 4-bromotoluene, and 4-bromoanizole were used as substrates.     

Dicarbonyliridium(I) complexes of pyridine ester ligands and their reactivity towards various electrophiles

The reaction of dimeric precursor [Ir(CO)₂Cl]₂ with two molar equivalent of the pyridine-ester ligands (L) like methyl picolinate (a), ethyl picolinate (b), methyl nicotinate (c), ethyl nicotinate (d), methyl isonicotinate (e) and ethyl isonicotinate (f) affords the tetra coordinated neutral complexes of the type [Ir(CO)₂ClL] (1a-f). The single crystal X-ray structure of 1d reveals that the Ir atom occupies the centre of an approximately square planar geometry with two CO groups cis- to each other. Intermolecular C-H?O and Ir?C interactions greatly stabilize the supramolecular structure of 1d in the solid state. The oxidative addition (OA) reactions of 1a-f with different electrophiles such as CH₃I, C₂H₅I and I₂ undergo decarbonylation of one CO group to generate the oxidized products of the type [Ir(CO)RClIL] where R = -CH₃ (2a-f); -C₂H₅ (3a-f) and [Ir(CO)ClI₂L] (4a-f). Kinetic study of the reaction of 1c-f with CH₃I indicates a first order reaction which follow the order 1d > 1c > 1f > 1e. All the synthesized complexes were characterized by elemental analyses, IR, and multinuclear NMR spectroscopy.     

(Pyrazolylmethyl)pyridine platinum(II) and gold(III) complexes: Synthesis, structures and evaluation as anticancer agents

Reactions of 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine (L1), 2-(3,5-diphenylpyrazol-1-ylmethyl)pyridine (L2), 2-(3,5-di-tert-butylpyrazol-1-ylmethyl)pyridine (L3) and 2-(3-p-tolylpyrazol-1-ylmethyl)pyridine (L4) with K₂[PtCl₄] in a mixture of ethanol and water formed the dichloro platinum complexes [PtCl₂(L1)] (1), [PtCl₂(L2)] (2), [PtCl₂(L3)] (3) and [PtCl₂(L4)] (4). Complex 1, [PtCl₂(L1)], could also be prepared in a mixture of acetone and water. Performing the reactions of L2 and L3 in a mixture of acetone and water, however, led to C-H activation of acetone under mild conditions to form the neutral acetonyl complexes [Pt(CH₂COCH₃)Cl(L2)] (2a) and [Pt(CH₂COCH₃)Cl(L3)] (3a). The same ligands reacted with HAuCl₄ · 4H₂O in a mixture of ethanol and water to form the gold salts [AuCl₂(L1)][AuCl₄] (5) [AuCl₂(L2)][Cl] (6) [AuCl₂(L3)][Cl] (7) and [AuCl₂(L4)][AuCl₄] (8); however, with the pyrazolyl unit in the para position of the pyridinyl ring in 4-(3,5-dimethylpyrazol-1-ylmethyl)pyridine (L5), 4-(3,5-diphenylpyrazol-1-ylmethyl)pyridine (L6) neutral gold complexes [AuCl₃(L5)] (9) and [AuCl₂(L6)] (10) were formed; signifying the role the position of the pyrazolyl group plays in product formation in the gold reactions. X-ray crystallographic structural determination of L6, 2, 33a, 8 and 10 were very important in confirming the structures of these compounds; particularly for 3a and 8 where the presence of the acetonyl group confirmed C-H activation and for 8 where the counter ion is . Cytotoxicity studies of L2, L4 and complexes 1-10 against HeLa cells showed the Au complexes were much less active than the Pt complexes.     

Triorganotin(IV) complexes of Schiff base derived from 6-amino-2-mercaptobenzothiazole: Synthesis, characterization and X-ray crystal structures

Nine triorganotin(IV) complexes of the type R₃SnL (L = L1 R = Me 1, Ph 2, PhCH₂3; L = L2 R = Me 4, Ph 5, PhCH₂6; L = L2 R = Me 7, Ph 8, PhCH₂9) have been obtained by reaction of new Schiff base HL1, HL2 or HL3 with triorganotin(IV) chloride in the presence of sodium ethoxide. All the complexes 1-9 were characterized by elemental, IR and NMR spectra analyses. Except for complexes 3, 4, 6, 9, the others were also characterized by X-ray crystallography diffraction analyses, which revealed that complexes 1, 2, 5, 7, 8 were four coordinated and displayed a capped tetrahedron.     

Addition of secondary amines to activated alkenes promoted by Pd(II) complexes: Use of ammonium salts as cocatalysts

The complexes [Pd(acac)₂] 1, [Pd(hfa)₂] 2 (hfa = hexafluoroacetylacetonate), [Pd(CF₃CO₂)₂] 3 and [Pd₃(CH₃CO₂)₆] 4 exhibit very different catalytic efficiency in the reaction between secondary amines and activated alkenes. Complexes 1 and 4 generally show an enhanced activity when catalytic amounts of NH₄X salts (X⁻ = low-coordinating anion) are added to the reaction mixtures. On the contrary, the activity of the perfluorurate analogues 2 and 3, which is much higher than that of 1 and 4, is generally scarcely affected by the presence of the NH₄X additive. The cocatalytic effect of NH₄X is comparable with that of strong acids such as CF₃SO₃H. The ammonium salts alone can behave as a catalyst giving an almost quantitative yield of the hydroamination product.     

Chiral 2-pyridyl alcoholate copper complexes: crystal structures of [bis(2-pyridyl alcoholate)copper(II)] and the use of [(2-pyridyl alcoholate)copper(II)]and [(2-pyridyl alcoholate)copper(I)] in asymmetric cyclopropanation of styene and allylic oxidation of cyclohexene

Chiral N,O pyridine alcohols HL¹-HL⁶ were used to form complexes with copper(II) ions. Ligands HL¹ and HL² formed complexes with copper(II) ions when Cu(OAc)₂ and HL were refluxed in methanol/ethanol mixture. Ligand HL³ formed a complex with copper(II) when deprotonated with NaH and stirred in a Cu(II) acetate THF solution. Ligands HL⁴-HL⁶ did not form complexes with copper(II) under similar conditions. Two complexes, [Cu(L¹)₂] and [Cu(L²)₂], were isolated as single crystals and characterized by X-ray crystallography. These complexes showed low catalytic activities in asymmetric reactions. However, they became active when reacted with triflic acid. Copper complexes, [Cu(L)] or [Cu(L)]⁺, formed in situ by reacting ligands HL with copper(I) or (II) ions, respectively, were also found to be active copper catalysts for asymmetric cyclopropanation of styrene with ethyl diazoacetate and allylic oxidation of cyclohexene with t-butylperoxybenzoate. Enantioselectivities up to 56% and 38% were obtained in asymmetric cyclopropanation of styrene and asymmetric allylic oxidation of cyclohexene, respectively.     

Diverse reactivity of stereoisomers containing quadruply bonded dimolybdenum with oxygen: formation of [{Mo(η-N,N′-diisopropylbenzamidinato)oxo}2(μ-acetato)2(μ-oxo)]

The reaction of quadruply bonded dimolybdenum complex, [Mo₂(μ-OAc)₄] (1), with lithiated amidinato, Li[(NⁱPr)₂CR] (R = ^tBu; 2a, Me; 2b, Ph; 2c), was investigated. The reaction of 1 with 2a afforded the dark-red solid, whereas the product was so highly unstable that the product was not able to be characterized. In the case of acetamidinato 2b, lantern-type mixed-ligand quadruply bonded dimolybdenum complex, [Mo₂(μ-OAc){μ-(NⁱPr)₂CMe}₃] (3), was obtained as a yellow solid. In the reaction with benzamidinato 2c, symmetrical lantern-type dimolybdenum complex, [Mo₂(μ-OAc)₂ {μ-(NⁱPr)₂CPh}₂] (4), was isolated as a yellow solid. In the latter reaction, intermediary red compound (5), which is considered to be stereoisomer of 4 possessing non-lantern-type skeleton, was formed. However, isolation of 5 as a single component was not successful due to isomerization to 4. Complex 5 readily reacted with dry oxygen to give dimolybdenum(V) complex, [{Mo(η-(NⁱPr)₂CPh)oxo}₂ (μ-OAc)₂(μ-oxo)] (6), as a red solid. These complexes were characterized spectroscopically as well as, in some cases, by X-ray analyses.     

Relating catalytic activity and electrochemical properties: The case of arene-ruthenium phenanthroline complexes catalytically active in transfer hydrogenation

The electrochemical properties of cationic complexes [(η⁶-arene)Ru(N ∩ N)Cl]Cl (arene/N ∩ N = C₆H₆/1,10-phenanthroline (1), p-MeC₆H₄Prⁱ/1,10-phenanthroline (2), C₆Me₆/1,10-phenanthroline (3), C₆Me₆/5-NO₂-1,10-phenanthroline (4), and C₆Me₆/5-NH₂-1,10-phenanthroline (5)) were studied by cyclic voltammetry in order to rationalize catalytic activity in transfer hydrogenation of the respective aqua complexes [(η⁶-arene)Ru(N ∩ N)(OH₂)](BF₄)₂ (6-10). Complexes 1-5 were chosen because the ‘true’ catalysts 6-10 are unstable under the conditions of the measurement. The electrochemical behaviour of 1-5 in acetonitrile solution is rather complicated due to consecutive and parallel chemical reactions that accompany electron transfer processes. Nonetheless, interpretation of the electrochemical data allowed to assess the influence of the structure and substitution on the redox and catalytic properties: the catalytic ability correlates with the reduction potentials, indicating the decisive role of the η⁶-arene ring directly bonded to the catalytic centre (Ru).     

Synthesis and some reactivity of amidinato(pyridine) complexes of molybdenum and tungsten formulated as [M(η-allyl)(amidinato)(CO)2(NC5H5)]

Bis(pyridine) complexes of molybdenum and tungsten, [M(η³-allyl)Cl(CO)₂(NC₅H₅)₂] (M=Mo; 3-Mo, M=W; 3-W), reacted with an equimolar amount of lithiated amidinate, Li[(PhN)₂CR] (R=H; 4a-Li, R = CH₃; 4b-Li), to yield corresponding amidinato(pyridine) complexes, [M(η³-allyl){(PhN)₂CR}(CO)₂(NC₅H₅)] (M=Mo, R=H; 5a-Mo, M=Mo, R=CH₃; 5b-Mo, M=W, R=H; 5a-W), as a yellow solid. The dissociation of pyridine ligand from the central metal in complexes 5a was observed in a polar solvent such as acetonitrile. In these cases, although the formation of amidinato(acetonitrile) complexes, [M(η³-allyl){(PhN)₂CH}(CO)₂(NCMe)] (M=Mo; 6a-Mo, M=W; 6a-W), was suggested spectroscopically, isolation of complexes 6a was not successful but the re-formation of pyridine complexes 5a was observed. In the reactions of complexes 5a with PEt₃ and with P(OMe)₃, the substitution reactions easily took place to give [M(η³-allyl){(PhN)₂CH}(CO)₂(PEt₃)] (M=Mo; 7a-Mo, M=W; 7a-W) and [M(η³-allyl){(PhN)₂CH}(CO)₂{P(OMe)₃}] (M=Mo; 8a-Mo, M=W; 8a-W), respectively. These complexes were characterized spectroscopically as well as, in some cases, by X-ray analyses.     

Synthesis, characterization, and reactivity of zinc carboxylate complexes of 2,3-pyridine dicarboxylic acid and (3-oxo-2,3-dihydro-benzo[1,4]oxazin-4-yl)acetic acid

Ethylenediammonium tris-2,3-pyridine dicarboxylato zinc(II) trihydrate (enH₂)₂[ZnL₃]·2H₂O (1) (where H₂L = 2,3-pyridine dicarboxylic acid, en = ethylenediamine) and a mixed metal coordination polymer with composition [Na₂ZnL′₃(OAc)(H₂O)₃]_n (2) {where L′ = anion of (3-oxo-2,3-dihydro-benzo[1,4]oxazin-4-yl)acetic acid} are synthesized and characterized. The complex 1 is mono nuclear complex with three coordinating carboxylate anion along with nitrogen chelating zinc ion and there is three uncoordinated carboxylate group one each from three ligand molecules making a complex anion of zinc(II). The zinc(II) ion are in distorted octahedral coordination geometry. In this complex diprotonated ethylenediamines serve as cations. The complex 2 has a polymeric structure with one acetate and three carboxylate of L′ binding to zinc ion provides a tetrahedral environment and these ligands further hold dinuclear units of tri-aquated sodium ions; each dinuclear sodium units are bridged by one water molecule make the coordination polymer. The catalytic ability of these two complexes 1 and 2 towards carbon-carbon bond formation reaction between 3,4-dimethoxy benzaldehyde and acetone are studied. Both the complexes as well as sodium salt of L′ are found to be catalyst for such reactions.     

Synthesis of {15-benzyloxy-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),13,15-triene}nickel(II) perchlorate and its analogs, and their catalytic behavior in reductive debromination of 1-bromo-4-tert-butylbenzene

New nickel(II) complexes with macrocyclic ligands bearing benzyloxy [(5), (9)], 2-methylbenzyloxy (7), 3-methylbenzyloxy (8), and hydroxy (6) groups on the pyridine ring have been synthesized. Structures of the hydroxy substituted macrocyclic ligand (L-OH·3HCl·H₂O), and the benzyloxy substituted ligand (L-OBn·3HCl) and its nickel(II) complex (5), as well as an analogous Ni(II) complex (8), have been revealed by X-ray crystallography. Their catalytic capabilities in the reductive debromination of 1-bromo-4-tert-butylbenzene have been elucidated, which has revealed that the pyridine ring can be a suitable position for the introduction of functional groups while maintaining the catalytic capabilities of the nickel(II) complexes.