A new series of iodocarbonyl ruthenium (II) complexes with unsymmetrical phosphine-phosphine sulfide ligands of the type Ph2P(CH2)nP(S)Ph2, n = 1-4: Isolation and structural investigation

Hexa-coordinated chelate complex cis-[Ru(CO)₂I₂(P∩S)] (1a) {P∩S = η²-(P,S)-coordinated} and penta-coordinated non-chelate complexes cis-[Ru(CO)₂I₂(P∼S)] (1b-d) {P∼S = η¹-(P)-coordinated} are produced by the reaction of polymeric [Ru(CO)₂I₂]_n with equimolar quantity of the ligands Ph₂P(CH₂)_nP(S)Ph₂ {n = 1(a), 2(b), 3(c), 4(d)} in dichloromethane at room temperature. The bidentate nature of the ligand a in the complex 1a leads to the formation of five-membered chelate ring which confers extra stability to the complex. On the other hand, 1:2 (Ru:L) molar ratio reaction affords the hexa-coordinated non-chelate complexes cis,cis,trans-[Ru(CO)₂I₂(P∼S)₂] (2a-d) irrespective of the ligands. All the complexes show two equally intense terminal ν(CO) bands in the range 2028-2103 cm⁻¹. The ν(PS) band of complex 1a occurs 23 cm⁻¹ lower region compared to the corresponding free ligand suggesting chelation via metal-sulfur bond formation. X-ray crystallography reveals that the Ru(II) atom occupies the center of a slightly distorted octahedral geometry. The complexes have also been characterized by elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopy.     

Reaction of [MCl2(CH3CN)2] (M = Pd(II), Pt(II)) compounds with N1-alkylpyridylpyrazole-derived ligands

Palladium(II) and platinum(II) complexes with N-alkylpyridylpyrazole-derived ligands, 2-(1-ethyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L¹) and 2-(1-octyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L²), cis-[MCl₂(L)] (M = Pd(II), Pt(II)), have been synthesised. Treatment of [PdCl₂(L)] (L = L¹, L²) with excess of ligand (L¹, L²), pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ and NaBPh₄ produced the following complexes: [Pd(L)₂](BPh₄)₂, [Pd(L)(py)₂](BPh₄)₂ and [Pd(L)(PPh₃)₂](BPh₄)₂. All complexes have been characterised by elemental analyses, conductivity, IR and NMR spectroscopies. The crystal structures of cis-[PdCl₂(L²)] (2) and cis-[PtCl₂(L¹)] (3) were determined by a single crystal X-ray diffraction method. In both complexes, the metal atom is coordinated by one pyrazole nitrogen, one pyridine nitrogen and two chlorine atoms in a distorted square-planar geometry. In complex 3, π-π stacking between pairs of molecules is observed.     

Homoleptic platinum(II) and palladium(II) complexes of 1,5,9-trithiacyclododecane: the crystal structures of [Pt(12S3)2](PF6)2 · 2CH3NO2 and [Pd(12S3)2](BF4)2 · 0.5H2O

The synthesis, spectroscopy, electrochemistry, and crystal structures of two new mononuclear homoleptic Pt(II) and Pd(II) complexes with the crown trithioether 1,5,9-trithiacyclododecane (12S3) are reported. In contrast to behavior with analogous smaller ring trithiacrowns, both metal complexes exhibit exodentate axial sulfur donors, a consequence of the preferred conformation of the 12S3 ligand. The lack of two axial metal-sulfur interactions correlates with the observed electronic spectroscopy and oxidative electrochemistry displayed by the complexes and contrasts with properties exhibited by complexes containing smaller polythioether macrocycles. The two complexes have electronic spectra dominated by charge transfer, not d-d bands and show no M²⁺/M³⁺ couples. Both complexes show a fluxional 12S3 ligand in solution due to a 1,5-metallotropic shift, an uncommon observation of this particular type of intramolecular ligand exchange. The ¹⁹⁵Pt NMR chemical shift of −4201 ppm for [Pt(12S3)₂]²⁺ is consistent with an alternating positioning of the four sulfur lone pairs on the coordinated thioethers. Although 12S3 is poorly pre-organized for facial complexation, its flexibility to position a sulfur in an exodentate fashion enables it to form stable complexes with d⁸ metal ions such as Pt(II) and Pd(II).     

Synthesis and multinuclear magnetic resonance spectroscopy of the novel ionic Pt(II) mixed-ligands complexes cis- and trans-[Pt(pyrazine)2(Ypy)2](NO3)2 where Ypy = pyridine derivative

Novel ionic mixed-ligands complexes of the types cis- and trans-[Pt(pz)₂(Ypy)₂](NO₃)₂ (where Ypy is a pyridine derivative and pz = pyrazine) were synthesized and studied mainly in the solid state by IR spectroscopy and in aqueous solution by multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopy. The trans isomers with ligands containing a methyl group in ortho position on the pyridine ring could not be synthesized. The results of the solution NMR characterization have shown that the isolated compounds are pure. In ¹⁹⁵Pt NMR, the cis complexes containing a methyl group in ortho positions were observed at lower field (average −2337 ppm) than the other cis compounds (average −2427 ppm), which is explained by the solvent effect. The trans isomers were observed at very slightly lower fields (average −2422 ppm) than the equivalent cis complexes (average −2427 ppm). In ¹H NMR, the coupling constants ³J(¹⁹⁵Pt-¹H_Ypy) and ³J(¹⁹⁵Pt-¹H_pz) are larger in the cis compounds (∼40 Hz) than in the trans complexes (∼31 Hz). A few ⁴J(¹⁹⁵Pt-¹H_pz) were observed (∼16 Hz). In ¹³C NMR spectroscopy, the coupling constants ³J(¹⁹⁵Pt-¹³C_pz) and ³J(¹⁹⁵Pt-¹³C_Ypy) are also larger in the cis configuration (∼30 and ∼38 Hz, respectively) than in the trans isomers (∼20 Hz). One ⁴J(¹⁹⁵Pt-¹³C_pz) could be calculated (17 Hz). The presence of the syn and anti rotamers were observed in all the cis complexes containing a pyridine derivative with a -CH₃ group in ortho position. They were observed in ¹⁹⁵Pt, ¹H and ¹³C NMR spectroscopy. The proportion of the two rotamers is about 55% and 45%.     

Synthesis and characterization of homologous nickel(II) and palladium(II) complexes with biphosphine monoxide ligands Ph2P(CH2)nP(O)Ph2 (n = 1–3) and pTol2P(CH2)P(O)pTol2

A series of cationic nickel complexes [(η³-methally)Ni(PP(O))]SbF₆ (1–4) [PP(O) = Ph₂P(CH₂)P(O)Ph₂ (dppmO) (1), Ph₂P(CH₂)₂P(O)Ph₂ (dppeO) (2), Ph₂P(CH₂)₃P(O)Ph₂ (dpppO) (3), pTol₂P(CH₂)P(O)pTol₂ (dtolpmO) (4)] has been synthesized in good yields by treatment of [(η³-methally)NiBr]₂ with biphosphine monoxides and AgSbF₆. The ligands are coordinated in a bidentate way. Starting from [(η³-all)PdI]₂ the cationic complexes [(η³-all)PP(O))]Y (8–14). [PP(O) = dppmO, dppeO, dpppO, dtolpmO;Y = BF₄, SbF₆, CF₃SO₃, pTolSO₃] were synthesized in good yields. The coordination mode of the ligand is dependent on the backbone and the anion, revealing a monodentate coordination with dppmO for stronger coordinating anions. The intermediates [(η³-all)Pd(I)(PP(O)-κ¹-P)] (5–7) [PP(O) = dppmO (5), dppeO (6), dtolpmO (7)] were isolated and characterized. Neutral methyl complexes [(Cl)(Me)Pd(PP(O))] (15–18). [PP(O) = dppmO (15), dppeO (16), dpppO (17), dtolpmO (18)] can easily be obtained in high yields starting from [(cod)PdCl₂]. For dppmO two different routes are presented. The structure of [(Me)(Cl)Pd{;Ph₂P(CH₂-P(O)Ph₂-κ²-P,O};] · CH₂Cl₂ (15) with the chlorine atom trans to phosphorus was determined by X-ray diffraction.     

Heterobimetallic Fe-Pd and Fe-Pt NCN pincer complexes (NCN = [C6H2(CH2NMe2)2-2,6])

The meta-diaminoaryl ferrocenes Fc-NCN-H (3) and Fc-CC-NCN-H (5) (Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe, NCN-H = C₆H₃(CH₂NMe₂)₂-3,5) can be used as precursors in the preparation of heterobimetallic transition metal complexes of structural type Fc-NCN-MX (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻; MX = PdCl (7), PtCl (8), PtI (9)) and Fc-CC-NCN-MX (MX = PdCl (11), PdI (12), PtCl (13)), respectively. They are accessible by applying different synthesis procedures, including oxidative addition and metallation-transmetallation processes.Cyclovoltammetric studies show that the ferrocene moieties in 3, 5, 7-9 and 11-13 can reversibly be oxidised. The potential of the Fe(II)/Fe(III) redox couple decreases with increasing electron density at the NCN pincer unit. The use of 8 as a possible (electro)chemical sensor in the detection of SO₂ is discussed as well.The solid-state structures of 8 and 13 are reported. The crystals of 8 contain two molecules of 8 in the asymmetric unit. The plane of the C₆H₂ moiety is with 27.2(3)° and 38.2(3)° tilted towards the C₅H₄ entity, while in 13 an angle of 45.9(3)° can be found. The d⁸-electron configured platinum atoms possess a somewhat distorted square-planar surrounding, setup by two Me₂NCH₂ortho-substituents, the NCN C_ipso carbon atom and the chloride ligand.     

Comparison in halide binding ability between the unsaturated clusters [Pd3(μ-dppm)3(CO)] and [PdPtCo(μ-dppm)2(CO)3(CNBu)] (dppm = Ph2PCH2PPh2)

The trinuclear clusters [Pd₃(μ-dppm)₃(CO)]²⁺ and [PtPdCo(μ-dppm)₂(CO)₃(CN^tBu)]⁺ exhibit a large and a small cavity, respectively, formed by the phenyl rings of the bridging diphosphine ligands. Their binding constants (K₁₁) with halide ions (X⁻) were obtained by UV-Vis spectroscopy. The binding ability varies as I⁻ > Br⁻ > Cl⁻, and [Pd₃(μ-dppm)₃(CO)]²⁺ > [ptPdCo(μ-dppm)₂-(CO)₃(CN^tBu)]⁺. The MO diagram for the related cluster [Pd₂Co(μ-dppm)₂(CO)₄]⁺ has been addressed theoretically in order to predict the nature of the lowest energy electronic bands. For this class of compounds, the lowest energy bands are assigned to charge transfers from the Co center to the Pd₂ centers.     

The structural definition of adducts of stoichiometry MX:dpex (2:3)(∞), M = Cu, Ag, X = simple anion, dpex = Ph2E(CH2)xEPh2, E = P, As

Single crystal X-ray structural characterizations are recorded for a number of adducts of MX:dpex (2:3) stoichiometry (MX = simple univalent copper or silver salt; dpex = Ph₂E(CH₂)_xEPh₂ (E = P, As)). CuX:dppe (2:3) (X = Cl, Br, I, CN) are binuclear [(dppe-P,P′)CuX(P-dppe-P′)CuX(P,P′-dppe)], all centrosymmetric. AgX:dpex (2:3) (dpex = ‘dpae’ (Ph₂As(CH₂)₂AsPh₂), X = Br, F₃CCO₂ (= ‘tfa’), F₃CSO₃ (≡ ‘tfs’); dpex = ‘dpape’ (Ph₂As(CH₂)₂PPh₂), X = CN, SCN, OClO₃) are one-dimensional polymers ?-E′)₁AgX(E-dpex-E′)₂-AgX(E-dpex-E′)₁AgX?, P, As sites scrambled in the latter. AgNO₃:dpam (2:3) is also a one-dimensional polymer, ?AgO·NO·OAg(As-dpam-As)AgO·NO·OAg? (‘dpam’ ≡ Ph₂As(CH₂)₂AsPh₂). AgX:dpae (2:3) (X = I, CN, ClO₄, NO₃) and AgX:dpape (2:3) (X = Br, I, NO₃) are two-dimensional polymers with large 30-membered macrocyclic rings; similar webs are found for dppx ligands in AgOH:dppb (2:3) and AgNCO, Agtfa:dpph (2:3) with 42- and 54-membered rings. Complexes AgX:dpape (1:3) (X = Cl, Br) are defined as mono-nuclear [XAg(Ph₂P(CH₂)₂AsPh₂)₃] arrays, the unidentate ligands predominantly P-bound. Synthetic procedures for the adducts are reported, selected compounds being characterized both in solution (¹H, ³¹P NMR, ESI MS) and in the solid state (IR).     

[Co{Ph2P(O)CH2P(O)Ph2}3][CoCl4] · 8CHCl3: Crystal structure and formation from [Co2(Ph2PCH2PPh2)(CO)6] in chloroform

When a solution of [Co₂(Ph₂PCH₂PPh₂)(CO)₆] in chloroform or deuterochloroform is allowed to stand in air at room temperature, it deposits dark green crystals of [Co{Ph₂P(O)CH₂P(O)Ph₂}₃][CoCl₄] · 8CHCl₃. The same product is formed more quickly and in much higher yield (80% based on Co) if the reaction is carried out in the presence of 2 equiv. of [Ph₂PCH₂PPh₂]; the Co^II appears to catalyse the air-oxidation of [Ph₂PCH₂PPh₂]. The salt was characterised by X-ray crystallography and shown to contain octahedral Co^II cations and Co^II tetrahedral anions having normal bond lengths and angles.     

Synthesis and multinuclear magnetic resonance spectroscopy of the novel ionic Pt(II) mixed-ligands complexes cis- and trans-[Pt(amine)2(pyrimidine)2](NO3)2

Novel ionic mixed-ligands complexes of the types cis- and trans-[Pt(amine)₂(pm)₂](NO₃)₂ (where pm = pyrimidine) were synthesized and studied in the solid state by IR spectroscopy and in aqueous solution by multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopy. The results of the solution NMR characterization have shown that the isolated compounds are pure. In ¹⁹⁵Pt NMR, the cis RNH₂ complexes were observed at slightly lower fields (ave. −2441 ppm) than the equivalent trans analogues (ave. −2448 ppm). For Me₂NH, the difference between the two isomers is larger (29 ppm). The complexes are observed at lower fields (difference of 100 ppm) than the corresponding [Pt(amine)₄]²⁺ complexes, which might indicate the presence of π-backdonation in the Pt-pm bond. In ¹H NMR, the coupling constants ³J(¹⁹⁵Pt-¹H_amine) are larger in the cis compounds (38-48 Hz) than in the trans analogues (30-36 Hz). The ³J(¹⁹⁵Pt-¹H_pm) values are also larger for the cis isomers. In ¹³C NMR spectroscopy, the coupling constants ³J(¹⁹⁵Pt-¹³C_amine) are 36 Hz (ave.) for the cis complexes and 26 Hz (ave.) for the trans isomers, while the ²J(¹⁹⁵Pt-¹³C_amine) are 18 Hz (cis) and 14 Hz (trans), respectively. The ³J(¹⁹⁵Pt-¹³C_5(pm)) values are 36 Hz (cis) and 28 Hz (trans). A few ²J(¹⁹⁵Pt-¹³C_pm) couplings were observed (7-10 Hz).     

Synthesis and characterisation of palladium(II) and platinum(II) compounds containing pyrazole-derived ligands: crystal structure of [PdCl2(HL)] (HL = 3-phenyl-5-(2-pyridyl)pyrazole)

Reaction of the ligands 3-phenyl-5-(2-pyridyl)pyrazole (HL¹), 3,5-bis(2-pyridyl)pyrazole (HL²), 3-methyl-5-(2-pyridyl)pyrazole (HL³) and 3-methyl-5-phenylpyrazole (HL⁴) with [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) or [PdCl₂(cod)] gives complexes with stoichiometry [PdCl₂(HL)₂] (HL = HL¹, HL², HL³), [Pt(L)₂] (L = L¹, L², L³) and [MCl₂(HL⁴)₂] (M = Pd(II), Pt(II)). The new complexes were characterised by elemental analyses, conductivity measurements, infrared and ¹H NMR spectroscopies. The crystal and molecular structure of [PdCl₂(HL¹)] was resolved by X-ray diffraction, and consists of monomeric cis-[PdCl₂(HL¹)] molecules. The palladium centre has a typical square planar geometry, with a slight tetrahedral distortion. The tetra-coordinated metal atom is bonded to one pyridine nitrogen, one pyrazolic nitrogen and two chloro ligands in a cis disposition. The ligand HL¹ is not completely planar.     

Mn(II) complexes of monoanionic bidentate chelators: X-ray crystal structures of Mn(dha)2(CH3OH)2 (Hdha = dehydroacetic acid) and [Mn(ema)2(H2O)]2 · 2H2O (Hema = 2-ethyl-3-hydroxy-4-pyrone)

This report describes synthesis and characterization of bis-ligand Mn(II) complexes of bidentate chelators: maltol (3-hydroxy-2-methyl-4-pyrone), ethylmaltol (2-ethyl-3-hydroxy-4-pyrone), 1,2-dimethyl-3-hydroxy-4-pyridinone (DMHP) and dehydroacetic acid. All four Mn(II) complexes were characterized by elemental analysis, IR, UV/Vis, EPR, cyclic voltammetry, and X-ray crystallography in cases of Mn(dha)₂(CH₃OH)₂ and [Mn(ema)₂(H₂O)]₂ · 2H₂O. The bidentate chelator plays a significant role in the solid state structure of its Mn(II) complex. For example, dha forms the monomeric complex Mn(dha)₂(CH₃OH)₂ while ethylmaltol forms the dimeric complex [Mn(ema)₂(H₂O)]₂. Because of smaller size, maltol ligands in Mn(ma)₂ are able to bridge adjacent Mn(II) centers to give a polymeric structure in solid state. Despite of the difference in their solid state structures, both Mn(ema)₂ and Mn(ma)₂ exist in solution as monomeric Mn(II) species, Mn(ema)₂(H₂O)₂ and Mn(ma)₂(H₂O)₂. This assumption is supported by the similarity in their UV/Vis spectra, EPR data and electrochemical properties. Replacing maltol with DMHP results in a decrease (by ∼100 mV) in the redox potential for the Mn(II)/Mn(III) couple, suggesting that DMHP stabilizes Mn(III) better than maltol. Since Mn(DMHP)₂(H₂O)₂ is readily oxidized to form the more stable Mn(III) complex Mn(DMHP)₃, DMHP has the potential as a chelator for removal of excess Mn(II) from patients with chronic Mn toxicity.     

Complexes formed from 2,4,6-trimercaptotriazine (H3TMT): synthesis and structural characterization of [M(PhP(CH2CH2P(Ph)2)2(HTMT)], M=Ni(II), Pd(II), Pt(II)

Na₃TMT · 9H₂O (H₃TMT=2,4,6-trimercaptotriazine) reacts with M(PPP)Cl₂, PPP=PhP(CH₂CH₂PPh₂)₂, M=Ni, Pd, Pt, to give the compounds [M(PPP)(HTMT)]. The nickel and palladium complexes have been characterized by single-crystal X-ray diffraction analysis. PPP is tridentate in both complexes. The nickel complex has an irregular trigonal bipyramidal configuration in which the triazine is bidentate, coordinating through one sulfur and one nitrogen donor atom. The palladium complex has an approximately square planar geometry in which the triazine forms a strong Pd-S bond in the plane and also a very weak Pd-N interaction above the plane. The ³¹P NMR spectrum of the platinum complex is similar to that of the palladium complex, which is consistent with the Pt complex also having an approximately square-planar structure. Variable temperature NMR spectra show that two conformational isomers of the nickel complex are present in solution at low temperatures, though exchange is fast at room temperature. DFT calculations have confirmed the possible existence of two five-coordinate isomers of comparable stability.     

The platinum complexes with histamine: Pt(II)(Hist)Cl2, Pt(II)(Iodo-Hist)Cl2 and Pt(IV)(Hist)2Cl2

The Pt(II) and Pt(IV) complexes with histamine were calculated by using more than 20 DFT functionals and various basis sets. Based on the comparison between the X-ray and theoretical geometrical parameters of the Pt(II)(Hist)Cl₂ complex the MPW1PW91, OPW91 and SVWN5 functionals combined with the 6-311G^∗∗ basis set for non-metallic and SDD (ECP) basis set for platinum were found to yield the most satisfactory agreement. The structure of the Pt(II) complex with iodohistamine important for pharmacy, so far isolated only in minute amounts, was predicted by using the MPW1PW91 functional. Comparison of the theoretical NMR chemical shifts of the Pt(II)(Hist)Cl₂ complex with those found experimentally have shown that the theoretical ¹H and ¹³C NMR chemical shifts are in plausible agreement with the experimental ones, whereas the theoretical ¹⁹⁵Pt chemical shifts fit the experimental values only when the relativistic approach is applied within the ZORA formalism. We confirmed suitability of the three selected functionals for reproduction of the experimental structure of Pt complexes at fourth oxidation state by using the cis- and ions as models. Finally, with the selected theoretical methods, the structures and stabilities of four Pt(IV)(Hist)₂Cl₂ complex isomers were predicted.     

Synthesis and characterization of complexes of the type [Pt(amine)4]I2 and trans-[Pt(CH3NH2)2(H3CNC(CH3)2)2]I2 by crystallography and multinuclear magnetic resonance spectroscopy

Complexes of the type [Pt(amine)₄]I₂ were synthesized and characterized mainly by multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopy. The compounds were prepared with different primary amines, but not with bulky amines, due to steric hindrance. In ¹⁹⁵Pt NMR, the signals were observed between −2715 and −2769 ppm in D₂O. The coupling constant ³J(¹⁹⁵Pt-¹H) for the MeNH₂ complex is 42 Hz. In ¹³C NMR, the average values of the coupling constants ²J(¹⁹⁵Pt-¹³C) and ³J(¹⁹⁵Pt-¹³C) are 18 and 30 Hz, respectively. The crystal structure of [Pt(EtNH₂)₄]I₂ was determined by X-ray diffraction methods. The Pt atom is located on an inversion center. The structure is stabilized by H-bonding between the amines and the iodide ions. The compound with n-BuNH₂ was found by crystallographic methods to be [Pt(n-BuNH₂)₄]₂I₃(n-BuNHCOO). The crystal contains two independent [Pt(CH₃NH₂)₄]²⁺ cations, three iodide ions and a carbamate ion formed from the reaction of butylamine with CO₂ from the air. When the compound [Pt(CH₃NH₂)₄]I₂ was dissolved in acetone, crystals identified as trans-[Pt(CH₃NH₂)₂(H₃CNC(CH₃)₂)₂]I₂ were isolated and characterized by crystallographic methods. Two trans bonded MeNH₂ ligands had reacted with acetone to produce the two N-bonded Schiff base Pt(II) compound.     

Synthesis and structure of two polymeric barium-oxydiacetates: [Ba(oda) · H2O]n and [Ba(Hoda)2]n (H2oda: oxydiacetic acid)

The reaction of barium carbonate or hydroxide with oxydiacetic acid leads to the self-assembly of two barium oxydiacetate polymers in good yield: [Ba(oda) · H₂O]_n (1) and [Ba(Hoda)₂]_n (2). The products have been characterized by elemental analysis, IR, TGA and single crystal X-ray diffraction studies. The central barium atom in each mononuclear fragment is nine-coordinate in 1 and 10-coordinate in 2. These fragments are bridged by carboxylato groups in anti-anti conformation and through H-bonds bonding interactions forming complex 3D networks.     

The structural definition of adducts of stoichiometry MX:dppx (1:1) M = Cu, Ag, X = simple anion, dppx=Ph2P(CH2)xPPh2, x = 3-6

Single crystal X-ray structural characterizations are recorded for a wide range of adducts of the form MX:dppx (1:1)_(n), M = silver(I) (predominantly), copper(I), X = simple (pseudo-) halide or oxy-anion (the latter spanning, where accessible, perchlorate, nitrate, carboxylate - a range of increasing basicity), dppx=bis(diphenylphosphino)alkane, Ph₂P(CH₂)_xPPh₂, x = 3-6. Adducts are defined of two binuclear forms: (i) [LM(μ-X)₂L], with each ligand chelating a single metal atom, and (ii) [M(μ-X)₂(μ-(P-L-P′))₂M′] where both ligands L and halides bridge the two metal atoms; a few adducts are defined as polymers, the ligands connecting M(μ-X)₂M′ kernels, this motif persisting in all forms. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR).     

Chemistry in environmentally benign media Part 1. Synthesis and characterization of 1,2-bis[bis(hydroxymethyl)phosphino]ethane (‘HMPE’). X-ray structure of [Pt{(HOH2C)2PCH2CH2P(CH2OH)2}2](Cl)2

The water-soluble bisphosphine, 1,2-bis(bis(hydroxymethyl)phosphino)ethane (1), was synthesized in near quantitative yield by the reaction of bisphosphine, H₂PCH₂CH₂PH₂, with an aqueous formaldehyde in the presence of K₂PtCl₄. The reaction of this water-soluble bisphosphine 1 with cis-Pt(COD)Cl₂ affords the mononuclear bischelate complex, [Pt{(HOH₂C)₂PCH₂CH₂P(CH₂OH)₂}₂](Cl)₂ (2), in near quantitative yield. The new ligand and complex have been characterized spectroscopically and the structure of the metal complex, 2, was determined by X-ray crystallography. The Pt(II) complex 2 crystallizes in the orthorhombic space group Pbca(a=14.623(1), B=16.216(2), C=9.319(4) Å) with Z=4. The final R value is 0.024.     

Preparation, crystal structures and spectroscopic properties of novel [MCl3 − n(P)3 + n] (M = Co, Rh; n = 0, 1, 2 or 3) series of complexes containing tripodal tridentate phosphine, 1,1,1-tris(dimethylphosphinomethyl)ethane

Cobalt(III) and rhodium(III) complexes of the series of [M^IIICl_3 − n(P)_3 + n]ⁿ⁺ (M = Co or Rh; n = 0, 1, 2 or 3) have been prepared with the use of 1,1,1-tris(dimethylphosphinomethyl)ethane (tdmme) and mono- or didentate phosphines. The single-crystal X-ray analyses of both series of complexes revealed that the M-P and M-Cl bond lengths were dependent primarily on the strong trans influence of the phosphines, and secondarily on the steric congestion around the metal center resulting from the coordination of several phosphine groups. In fact, the M-P(tdmme) bonds became longer in the order of [MCl₃(tdmme)] < [MCl₂(tdmme)(PMe₃)]⁺ < [MCl(tdmme)(dmpe)]²⁺ (dmpe = 1,2-bis(dimethylphosphino)ethane) < [M(tdmme)₂]³⁺ for both Co^III and Rh^III series of complexes, while the M-Cl bond lengths were shortened in this order (except for [M(tdmme)₂]³⁺). Such a steric congestion around the metal center can also account for the structural and spectroscopic characteristics of the series of complexes, [MCl(tdmme)(dmpm, dmpe or dmpp)]²⁺ (dmpm = bis(dimethylphosphino)methane, dmpp = 1,3-bis(dimethylphosphino)propane). The X-ray analysis for [CoCl(tdmme)(dmpm or dmpe)](BF₄)₂ showed that all Co-P bonds in the dmpm complex were shorter by 0.03-0.04 Å than those in the dmpe complex. Furthermore, the first d-d transition energy of the Co^III complexes and the ¹J_Rh-P(tdmme) coupling constants observed for the Rh^III complexes indicated an unusual order in the coordination bond strengths of the didentate diphosphines, i.e., dmpm > dmpe > dmpp.     

Synthesis, structure, and reactivity of fluorous phosphorus/carbon/phosphorus pincer complexes derived from P(CH2)5P backbones

Reactions of the diphosphine H₂P(CH₂)₅PH₂ and fluorous alkenes H₂CCHR_fn (excess; R_fn = (CF₂)_n−1CF₃; n = a, 6; b, 8; c, 10) at 60 °C in the presence of AIBN give the precursors (R_fnCH₂CH₂)₂P(CH₂)₅P(CH₂CH₂R_fn)₂ (2a-c; 68-74%). These react with Pd(O₂CCF₃)₂ in CF₃C₆F₅ at 80 °C to give the title complexes (5a-c, 51-18%). Addition of LiCl to 5b gives (6b, 97%); subsequent reaction with MeLi affords the corresponding methyl complex (97%). A solvate of 6b is crystallographically characterized. The structure exhibits CH₂CH₂R_f8 groups with nearly anti C-C-C-C conformations, extending in parallel above and below the palladium square plane to create fluorous lattice domains. Reactions of 2b and other metal complexes are described; in the cases of (PhCN)₂PdCl₂ or (COD)₂PtCl₂ (CF₃C₆H₅, room temperature), bimetallic species in which two MCl₂ moieties are bridged by two diphosphines appear to form. The CF₃C₆F₁₁/toluene partition coefficients of 2a-c and 5a-c establish high fluorophilicities; despite the lower fluorine weight%, those of 5a-c are slightly greater ((97.4-99.7):(2.6-0.3) versus (95.3-99.3):(4.7-0.7)).