Copper(II) nitrato and chloro complexes with sterically hindered tridentate ligands: Influence of ligand framework and charge on their structure and physicochemical properties

Copper(II) coordination complexes of the neutral ligand, tris(3-tert-butyl-5-methyl-1-pyrazolyl)methane (L2′), i.e. the copper(II) nitrato complexes [Cu(L2′)(NO₃)][Cu(NO₃)₄]_1/2 (1) and [Cu(L2′)(NO₃)](ClO₄) (2) and the copper(II) chloro complex [Cu(L2′)(Cl)](ClO₄) (3), and its anionic borate analogue, hydrotris(3-tert-butyl-5-methyl-1-pyrazolyl)borate (L2⁻), i.e. the copper(II) nitrato complex [Cu(L2)(NO₃)] (4) and the copper(II) chloro complex [Cu(L2)(Cl)] (5), were synthesized in order to investigate the influence of ligand framework and charge on their structure and physicochemical properties. While X-ray crystallography did not show any definitive trends in terms of copper(II) atom geometry in four-coordinate copper(II) chloro complexes 3 and 5, different structural trends were observed in five-coordinate copper(II) nitrato complexes 1, 2, and 4. These complexes were also characterized by spectroscopic techniques, namely, UV-Vis, ESR, IR/far-IR, and X-ray absorption spectroscopy.     

Mononuclear and polynuclear halide and nitrate Cu(II) compounds with 1,4,5-triazanaphthalene as a ligand: Characterization, magnetism and X-ray structures

Using the ligand 1,4,5-triazanaphthalene (abbreviated as tan) in combination with Cu(II) salts, three mononuclear compounds, Cu(tan)₂Cl₂ (1), Cu(tan)₂Br₂ (3), Cu(tan)₂(NO₃)₂ (5) and three polynuclear compounds, [Cu(tan)Cl₂]_n (2), [Cu(tan)Br₂]_n (4), [Cu(tan)(NO₃)₂]_n (6) have been synthesized and characterized by UV-Vis, EPR, FTIR and Far-FTIR spectroscopies. The crystal structures of compounds 1, 3, 5 and 6 are reported, as well as that of the dioxane adduct of compound 4, [Cu(tan)Br₂(C₄H₈O₂)](C₄H₈O₂) (4A).The structure of (2) was solved by X-ray powder diffraction. The coordination geometry around the Cu(II) atoms is tetrahedral for (1) and (3), square-pyramidal for (4A) and distorted octahedral for (5) and (6). Magnetic susceptibility measurements on the polynuclear compounds revealed weak antiferromagnetic interactions between the Cu(II) atoms with interaction constants (J) of J = −9.1 and −10.5 cm⁻¹, for 4 and 6, respectively. For compound 2 two options for possible interactions were considered, with interaction constants which vary for J_rung −22.0 to −13.5 cm⁻¹ and J_rail −19.6 to −17.0 cm⁻¹. These figures are discussed in the light of relevant structural parameters and literature.     

Coordination polymers derived from a bis-pyridyl-bis-amide ligand: Supramolecular structural diversities and anion binding properties

Six new coordination polymers namely [{Cu(μ-L1)(CH₃COO)₂}]_∝1a, [{Cu(μ-L1)₂(CH₃COO)₂]_∝1b, [{Cu(μ-L1)₂(H₂O)₂}(NO₃)₂]_∝2, [{Cu(μ-L1)₂(H₂O)₂}(ClO₄)₂]_∝3, [{Cu(μ-L1)(H₂O)₂(μ-SO₄)}·3H₂O]_∝4a and [{Cu(μ-L1)₂SO₄}·X]_∝4b (L1 = N,N′-bis-(3-pyridyl)terephthalamide) have been synthesized. Single crystal structures of five coordination polymers namely 1a, 2-4b and the free ligand L1 are discussed in the context of the effect of conformation dependent ligating topology of the ligands, hydrogen bonding backbone, counter anions on the resultant supramolecular structures observed in these coordination polymers. It was revealed from the single crystal X-ray structure analysis that conformation dependent ligating topology of the bis-amide ligand L1, counter anion’s ligating strength dependent metal: ligand ratio, hydrogen bonding ability of the ligand as well as counter anions are responsible for the formation of 1D zigzag, 1D looped chain, 2D corrugated sheet in 1a, 2-3, 4a−4b, respectively. By following in situ coordination polymer crystallization technique, anion binding and separation studies have also been performed; nitrate anion has been separated as neat coordination polymer crystals from a complex mixture of anions.     

Coordination polymers of Cu(II) and Cd(II) with bifunctional chelates of the type dipicolylamino-alkylcarboxylate, (NC5H4CH2)2N(CH2)nCO2H (n = 1, 2, 3 and 4)

A series of bifunctional chelates of the type dipicolylamino-alkylcarboxylate (NC₅H₄CH₂)₂N(CH₂)_nCO₂H (n = 1-4; HL¹-HL⁴, respectively) has been prepared. Reactions of the ligands in aqueous methanol/N,N-dimethylformamide with the appropriate Cu(II) salts yielded the compounds [CuL¹](NO₃)·H₂O (1·H₂O), [CuL²(H₂O)]BF₄·H₂O (2·H₂O), [Cu(HL³)(SO₄)]₂ (3) and [CuL⁴(NO₃)]·MeOH (4·MeOH). While compounds 1, 2 and 4 are one-dimensional, the detailed connectivities within the chains are quite distinct, depending on factors such as alkyl chain length and ligation of aqua ligands or anionic components. In contrast to 1, 2 and 4, the structure of 3 is molecular, a binuclear assembly of edge-sharing Cu(II) ‘4+2’ distorted octahedra. The Cd(II) species, [{CdL²}₂(SO₄)]·4H₂O (5·4H₂O), prepared from HL² and CdSO₄·nH₂O in aqueous methanol/N,N-dimethylformamide, is two-dimensional, with a network constructed from binuclear units of seven coordinate Cd(II), , linked through bridging SO₄²⁻ groups to produce an assembly of linked hexagonal rings [{CdL²}₂(SO₄)]₆.     

Novel long bipyridine-type linking ligands containing an intervening naphthalene fragment: [Zn(L)(NO3)2], [Zn(L)(NO3)2], and [Cd(L)1.5(NO3)2] (L = (4-py)-CHN-C10H6-NCH-(4-py); L = (3-py)-CHN-C10H6-NCH-(3-py))

Novel bipyridine-type linking ligands L¹ ((4-py)-CHN-C₁₀H₆-NCH-(4-py)) and L² ((3-py)-CHN-C₁₀H₆-NCH-(3-py)), a pair of isomers due to possessing different pairs of terminal pyridyl groups, were prepared by the Schiff-base condensation. In ligand L¹, the N?N separation between the terminal pyridyl groups is 16.0 Å, with their nitrogen donor atoms at the para positions (4,4′). The corresponding N?N separation in ligand L² is 14.2 Å, with the nitrogen donor atoms at the meta positions (3,3′). 1-D zigzag-chain coordination polymers [Zn(L¹)(NO₃)₂] (1) and [Zn(L²)(NO₃)₂] (2) were prepared by reactions of Zn(NO₃)₂ · 6H₂O with ligands L¹ and L², respectively, by solution diffusion. Polymer 3, [Cd(L¹)_1.5(NO₃)₂], prepared from Cd(NO₃)₂ · 4H₂O and L¹, exhibits a 1-D ladder structure, whose repeating ladder unit consists of four Cd metals and four L¹ ligands to create a large 76-membered ring with dimensions of 20.8 × 20.8 Å. All products were structurally characterized by X-ray diffraction.     

Synthesis, characterization and copper chemistry of a non-symmetric phenanthroline ligand: 2-Methyl-9-(3,5-dimethyl-N-pyrazolylmethyl)-1,10-phenanthroline

The synthesis of an unsymmetrical phenanthroline-based ligand, 2-methyl-9-(3,5-dimethylpyrazolylmethyl)-1,10-phenanthroline (L), and its cupric [Cu(II)] (1) and cuprous [Cu(I)] (2) complexes, are reported. The X-ray structures of each of these Cu complexes show distinct changes in coordination environments consistent with the geometrical preferences of the two oxidation states. In the solid-state, the Cu(II) complex (1) adopts a geometry best described as trigonal bipyramidal, while the Cu(I) complex (2) consists of a single dicationic dimer in which the ligand bridges between two copper ions, separated by 4.26 Å. The two Cu(I) coordination sites differ in 2 with one copper center complexed in a trigonal planar geometry and the other copper in a distorted tetrahedral environment; the latter coordination results from an additional CH₃CN ligand. Complex 1 exhibits a reversible redox process at −0.34 V versus Fc/Fc⁺ in CH₃CN, attributable to the Cu²⁺/Cu⁺ couple, while the dimeric Cu(I) complex (2) does not display this redox couple on the CV timescale. Over minutes however, complex 1 does oxidize in the presence of dioxygen to 2 in CH₃CN.     

Two different 1D-chains in the structures of the copper(I) coordination polymers based on bidentate Schiff-base building units and thiocyanate anions as bridging ligands

The reaction of the bidentate Schiff-base ligands (3,4,5-MeO-ba)₂en (L¹) and (4-Me-ba)₂en (L²) with Cu(SCN) in CH₃CN yielded two copper(I) coordination polymers [Cu(L¹)(SCN)]_n (1) and [Cu(L²)(SCN)]_n (2), which have been characterized by elemental analyses, IR- and ¹H NMR-spectroscopy, and X-ray crystallography. The non-centrosymmetric structures of both Cu(I) complexes consist of an one-dimensional polymeric chain in which copper(I) ions are bridged by two thiocyanate groups bonding in an end-to-end fashion. The Cu(I)?Cu(I) separation is 5.604 Å in 1 and 5.706 Å in 2.     

Cu(II) complexes with square pyramidal (N2S)CuCl2 chromophore: Jahn-Teller distortion and subsequent effect on spectral and structural properties

One monomeric neutral Cu(II) complex [(pmtpm)CuCl₂] (1) is reported by Lindoy and Livingstone [8]. Two new complexes namely, μ-Cl bridged binuclear Cu(II) complex [{(pmtpm)Cu(Cl)}₂ μ-Cl](ClO₄) (2) and a bis μ-Cl bridged binuclear Cu(II) complex [{(pmtpm)Cu}₂(μ-Cl)₂](ClO₄)₂ (3) derived from a tridentate Schiff base ligand, 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine (pmtpm) were synthesized and characterized by various spectroscopic methods and by X-ray crystallography. (N₂S)CuCl₂ chromophore(s) of distorted square pyramidal coordination geometries around Cu(II) ion(s) have been observed for all the complexes 1-3. The equatorial sites of the square plane comprise two N and a thioether S donor atoms of the pmtpm ligand as well as one Cl⁻ ion (terminal in 1 and 2, and bridging in 3) while the remaining axial site is occupied by a terminal Cl⁻ ion (for 1) or a bridging Cl⁻ ion (for 2 and 3). The equatorial Cu-Cl distances are much shorter [1: 2.2511(4) Å, 2: 2.2307(12) Å, 3: 2.2513(12) Å] than the axial Cu-Cl distances [1: 2.4394(4) Å, 2: 2.5597(9) Å, 3: 2.7037(12) Å]. The correlation of an axial Cu-Cl bond elongation with a lower g_|| value in the solid state EPR spectrum and a blue shifted ligand field transition in the solid and solution phase absorption spectrum has been observed.     

Tuning the formation of copper(I) coordination architectures with quinoxaline-based N,S-donor ligands by varying terminal groups of ligands and reaction temperature

Five new complexes [Cu₂(L¹)I₂]_∞ (1), [Cu(L²)I]₂ (2), {[Cu₂(L²)I₂](CH₃CN)₃}_∞ (3), [Cu₂(L³)I₂]_∞ (4) and {[Cu(L³)I](CH₃CN)}₂ (5) have been obtained by reacting three structurally related ligands, 2,3-bis(n-propylthiomethyl)quinoxaline (L¹), 2,3-bis(tert-butylthiomethyl)quinoxaline (L²) and 2,3-bis[(o-aminophenyl)thiomethyl]quinoxaline (L³) with CuI, respectively, at different temperatures. Single crystal X-ray analyses show that 1, 3, 4 possess 1D chain structures, while 2 and 5 are discrete dinuclear molecules. It is interesting that the reactions of CuI with L¹ at room temperature and 0 °C, respectively, only afforded same structure of 1 (1a and 1b), while using L² (or L³) instead, two different frameworks 2 and 3 (or 4 and 5) have been obtained. The structural changes mainly resulted from the different conformations that L² or L³ adopted at different temperatures. Our research indicates that terminal groups of ligands take an essential role in the framework formation, and the reaction temperature also has important effect on the construction of such Cu(I) coordination architectures. Furthermore, the influence of hydrogen bonds on the conformation of ligands and the supramolecular structures of these complexes have also been explored. The luminescence properties of complexes 1, 2, and 4 have been studied in solid state at room temperature.     

Copper(I)-imine complexes: Synthesis and catalytic activity in olefin cyclopropanation

Different imine-type ligands, prepared by the condensation of anilines or of α-methylbenzylamine with 2-pyridinecarboxaldehyde (pyim^1,2) or 2-quinolinecarboxaldehyde (quim^1,2) were prepared. These species act as N,N′-bidentate, chelating ligands upon coordination to Cu(I): treatment of [Cu(PPh₃)₃Cl] with an equimolar amount of the ligands resulted in the displacement of two molecules of PPh₃, giving rise to the formation of [Cu(pyim^1,2)(PPh₃)Cl] (1-2) and [Cu(quim^1,2)(PPh₃)Cl] (3-4), respectively. The copper derivatives 1-4 proved to be highly active catalysts in olefin cyclopropanation in the presence of ethyl diazoacetate, even using deactivated olefins (namely, 2-cyclohexen-1-one) as substrate. The X-ray structure of complex 2, [Cu(pyim²)(PPh₃)Cl], is also reported.     

Tetranuclear mixed-valence Co(II/III) and binuclear Ni(II) complexes incorporating hydroxyl-rich ligand: Syntheses, structures and magnetic properties

Three complexes of composition [Co₂^IICo₂^III(H₂hbhpd)₂(H₄hbhpd)₂(H₂O)₂]Cl₂(CH₃OH)₄ (1), [Co₂^IICo₂^III(H₂hbhpd)₂(H₄hbhpd)₂(H₂O)₂](NO₃)₂(CH₃OH)₄ (2) and [Ni₂(H₄hbhpd)₂(NO₃)](NO₃)(CH₃OH)_1.5 (3) (H₅hbhpd = 2-(2-hydroxy-benzylamino)-2-hydroxymethyl-propane-1,3-diol) have been synthesized and their structures have been characterized. Complexes 1 and 2 are mixed-valence cobalt clusters and display face-sharing monovacant dicubane structures. In the complexes 1 and 2, one of the three alkyl hydroxyl groups of H₅hbhpd ligand is deprotonated instead of deprotonation of phenyl hydroxyl group; thus monoanionic H₄hbhpd⁻ ligand displays novel η³, η¹, η¹, μ₃ coordination mode. Complex 3 is binuclear, and the two metal centers of 3 are bridged by two deprotonated phenyl hydroxyl oxygen atoms and iso-orthogonalized by a nitrato group in η¹η¹-O,O′ coordination fashion. Variable-temperature solid-state dc magnetization studies have been performed in the temperature range 2-300 K for compounds 1 and 3. Antiferromagnetic interactions were determined for 1 and ferromagnetic couplings were found for 3.     

Structural analysis and magnetic properties of the copper(II) dicyanamide complexes [Cu2(dmphen)2(dca)4], [Cu(dmphen)(dca)(NO3)]n and [Cu(4,4-dmbpy)(H2O)(dca)2] (dca=dicyanamide; dmphen=2,9-dimethyl-1,10-phenanthroline; 4,4-dmbpy=4,4-dimethyl-2,2-bipyridine)

The preparation, crystal structures and magnetic properties of three copper(II) compounds of formulae [Cu₂(dmphen)₂(dca)₄] (1), [Cu(dmphen)(dca)(NO₃)]_n (2) and [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] (3) (dmphen=2,9-dimethyl-1,10-phenanthroline, dca=dicyanamide and 4,4^′-dmbpy=4,4^′-dimethyl-2,2^′-bipyridine) are reported. The structure of 1 consists of discrete copper(II) dinuclear units with double end-to-end dca bridges whereas that of 2 is made up of neutral uniform copper(II) chains with a single symmetrical end-to-end dca bridge. Each copper atom in 1 and 2 is in a distorted square pyramidal environment: two (1) or one (2) nitrile-nitrogen atoms from bridging dca groups, one of the nitrogen atoms of the dmphen molecule (1 and 2) and either one nitrile-nitrogen from a terminal dca ligand (1) or a nitrate-oxygen atom (2) build the equatorial plane whereas the second nitrogen atom of the heterocyclic dmphen fills the axial position (1 and 2). The copper-copper separations through double (1) and single (2) end-to-end dca bridges are 7.1337(7) (1) and 7.6617(7) (2). Compound 3 is a mononuclear copper(II) complex whose structure contains two neutral and crystallographically independent [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] molecules which are packed in two different layer arrangements running parallel to the bc-plane and alternating along the a-axis. The copper atoms in both molecules have slightly distorted square pyramidal surroundings with the two nitrogen atoms of the 4,4^′-dmbpy ligand and two dca nitrile-nitrogen atoms in the basal plane and a water oxygen in the apical position. A semi co-ordinated dca nitrile-nitrogen from a neighbour unit [2.952(6) Å for Cu(2)-N] is in trans position to the apical water molecule in one of the two molecules, this feature representing part of the difference in supramolecular connections in the alternating layers referred to above. Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K reveal the occurrence of weak antiferromagnetic interactions through double [J=−3.3 cm⁻¹ (1), ] and single [J=−0.57 cm⁻¹ (2), ] dca bridges and across intermolecular contacts [θ=−0.07 K (3)].     

Synthesis, spectroscopic and magnetostructural evidence for the formation of Cu(II) complexes of pyridyl-2-carboxylate (2-pca) and quinolyl-2-carboxylate (2-qca) as a result of a novel oxidative P-dealkylation reaction of diethyl 2-pyridylmethylphosphonate (2-pmpe) and diethyl 2-quinolylmethylphosphonate (2-qmpe) ligands

The interaction of diethyl 2-pyridylmethylphosphonate (2-pmpe) ligand with CuX₂ salts unexpectedly leads to the formation of compounds of the formula Cu(2-pca)₂ [X=Cl⁻ (1), CH₃COO⁻ (3)], and Cu(2-pca)Cl [X=Cl⁻ (2)] (2-pca=pyridine-2-carboxylate ion). The diethyl 2-quinolylmethylphosphonate ligand (2-qmpe) reacts with CuX₂ salts to similarly yield compounds of stoichiometry Cu(2-qca)₂ · H₂O (X=ClO₄ ⁻ (4)], and for X=Cl Cu(2-qca)₂ · H₂O (5) and Cu(2-qca)Cl (6), (2-qca=quinoline-2-carboxylate ion). These compounds are products of a novel oxidative P-dealkylation reaction, which takes place on 2-pmpe and 2-qmpe ligands under the used conditions. The compounds were characterized by infrared, ligand field, EPR spectroscopy and magnetic studies. Cu(2-pca)₂ exists in two crystalline forms, a blue form (1) and a violet form (3). For 3 the single-crystal structure was determined. The copper atom is four-coordinated in a square-planar geometry. The stack between related (and hence parallel) pca moieties involves interatomic distances of 3.27 Å. Cu(2-qca)₂ · H₂O also exists in two forms, a green (4) and a blue-green (5). Both these complexes are five coordinated, involve the same CuN₂O₃ chromophore and are examples of the distortion isomers. Variable-temperature magnetic susceptibility measurements (1.9-300 K) have shown that the antiferromagnetic coupling observed is much stronger in 6 than in 1, 3, 4 and 5. For 2 a ferromagnetic exchange occurs.     

Trinuclear and tetranuclear adduct formation between sodium perchlorate and copper(II) complexes of salicylaldimine type ligands: Structural characterization and theoretical investigation

The synthesis of two new sodium perchlorate adducts (1:2 and 1:3) with copper(II) “ligand-complexes” is reported. One adduct is trinuclear [(CuL¹)₂NaClO₄] (1) and the other is tetranuclear [(CuL²)₃Na]ClO₄·EtOH (2). The ligands are the tetradentate di-Schiff base of 1,3-propanediamines and salicylaldehyde (H₂L¹) or 2-hydroxyacetophenone (H₂L²). Both complexes have been characterized by X-ray single crystal structure analyses. In both structures, the sodium cation has a six-coordinate distorted octahedral environment being bonded to four oxygen atoms from two Schiff-base complexes in addition to a chelated perchlorate anion in 1 and to six oxygen atoms from three Schiff-base complexes in 2. We have carried out a DFT theoretical study (RI-B97-D/def2-SVP level of theory) to compute and compare the formation energies of 1:2 and 1:3 adducts. The DFT study reveals that the latter is more stabilized than the former. The X-ray crystal structure of 1 shows that the packing of the trinuclear unit is controlled by unconventional C-H···O H-bonds and Cu²⁺-π non-covalent interactions. These interactions explain the formation of 1 which is a priori disfavored with respect to 2.     

Syntheses and structures of cobalt(III) alcoholate complexes formed by addition of a water molecule across 2-pyridyl substituted imine function

Schiff bases L1-L5 {N-[1-pyridine-2-ylethylidene]pyridine-2-amine (L1), 3-methyl-N-[1-pyridine-2-ylmethylidene]pyridine-2-amine (L2), 3-methyl-N-[1-pyridine-2-ylethylidene]pyridine-2-amine (L3), 4-methyl-N-[1-pyridine-2-ylmethylidene]pyridine-2-amine (L4), 4-methyl-N-[1-pyridine-2-ylethylidene]pyridine-2-amine (L5)} were synthesized and on reaction with Co(NO₃)₂·6H₂O, complexes having the molecular formulae [Co(L1O)₂]NO₃ (1), [Co(L2O)₂]NO₃·xH₂O (2a, x = 2; 2b, x = 3), [Co(L3O)₂]NO₃ (3), [Co(L4O)₂]NO₃·4H₂O (4), [Co(L5O)₂]NO₃ (5) were isolated from the respective imines. The salt [Co(L2O)₂]PF₆ (2c) was obtained by treating 2 with KPF₆. Complexes 1-5 were formed as a result of addition of a water molecule across the imine function and the resultant alcohol binds in its deprotonated form. The alcoholate ion remained bound in a facial tridentate fashion to the low-spin cobalt(III). X-ray crystal structure determination confirmed the presence of trans-trans-trans-N_AN_PO (A = aminopyridyl and P = pyridyl) disposition in 2a and cis-cis-trans-N_AN_PO in 2b, 2c and 4. Water dimers in 2a, 2b, 4 and water-nitrate ion network in 2a were other notable features.     

Mn(II) coordination architectures with mixed ligands of 3-(2-pyridyl)pyrazole and carboxylic acids bearing different secondary coordination donors and pendant skeletons

In our efforts to investigate the factors that affect the formation of coordination architectures, such as secondary coordination donors and pendant skeletons of the carboxylic acid ligands, as well as H-bonding and other weak interactions, two kinds of ligands: (a) 3-(2-pyridyl)pyrazole (L¹) with a non-coordinated N atom as a H-bonding donor, a 2,2′-bipyridyl-like chelating ligand, and (b) four carboxylic ligands with different secondary coordination donors and/or pendant skeletons, 1,4-benzenedicarboxylic acid (H₂L²), 4-sulfobenzoic acid (H₂L³), quinoline-4-carboxylic acid (HL⁴) and fumaric acid (H₂L⁵), have been selected to react with Mn(II) salts, and five new complexes, [Mn(L¹)₂(SO₄)]₂ (1), [Mn(L¹)₂(L²)]_∞ (2), [Mn(L¹)(HL³)₂]_∞ (3), Mn(L¹)₂(L⁴)₂ (4), and [Mn(L¹)₂(L⁵)]_∞ (5), have been obtained and structurally characterized. The structural differences of 1-5 can be attributed to the introduction of the different carboxylic acid ligands (H₂L², H₂L³, HL⁴, and H₂L⁵) with different secondary coordination donors and pendant skeletons, respectively. This result also reveals that the typical H-bonding (i.e. N-H?O and O-H?O) and some other intra- or inter-molecular weak interactions, such as C-H?O weak H-bonding and π?π interactions, often play important roles in the formation of supramolecular aggregates, especially in the aspect of linking the multi-nuclear discrete subunits or low-dimensional entities into high-dimensional supramolecular networks.     

Mimicking the reduced, oxidized and azide inhibited form of manganese superoxide dismutase by mononuclear Mn compounds utilizing tridentate ligands

The manganese complexes [Mn^II(Hbmimpm)₂(NO₃)](NO₃) · Et₂O (1), [Mn^III(bmimpm)₂(OAc)] · 2CH₂Cl₂(2), and [Mn^III(bmiapm)₂(OAc)] · MeOH · H₂O · CH₂Cl₂(3) containing the new ligands Bis(1-methylimidazol-2-yl)-(4-methoxyphen-1-yl)methanol (Hbmimpm) and Bis[(1-methylimidazol-2-yl)](2-aminophenyl)methanol (Hbmiapm) were synthesized. They are good structural models for the reduced (1) and oxidized (2, 3) form of manganese superoxide dismutase. All complexes were characterized by spectroscopic methods and X-ray structure analysis. Compounds 1 and 2 crystallize in the monoclinic space group P2₁/c whereas complex 3 crystallizes in the monoclinic space group P2₁/n. The coordination sphere around the manganese cores is distorted octahedral with two corresponding tridentate ligands representing the protein ligands and one nitrate (1) or acetate (2, 3) ion occupying two cis positions. Similar to the enzyme the Mn(III) complex 2 reacts with sodium azide. The obtained microcrystalline azide adduct was characterized by UV-Vis and IR spectroscopy.     

Coordination polymers and monomers based on new aminocarboxylate ligands: A cadmium(II) polymer containing dimeric aqua-bridged cadmium complex governed by polymeric chain

The synthesis and characterization of novel coordination polymers [Co(HCCB)(H₂O)₂]_n (1), [Zn(HCCB)(H₂O)₂]_n (2), {[Cd(HCCB)₂]·0.5[Cd(μ-H₂O)(H₂O)₄]₂}_n (3) and [Cu(HCCB)(H₂O)₂]_n (4) based on 3-(carboxymethylamino)-4-chlorobenzoic acid (H₃CCB) and mononuclear complexes [Cu(HBCCB)(H₂O)]·H₂O (5), [Co(HBCCB)(H₂O)]·H₂O (6), [Zn(HBCCB)(H₂O)] (7) and [Cd(HBCCB)(H₂O)] (8) containing 3-bis(carboxymethylamino)-4-chlorobenzoic acid (H₃BCCB) have been described. The compounds under investigation have been characterized by elemental analyses, spectral studies and structures of 1-3 and 5 determined crystallographically. Structural data of 1 and 2 revealed that the deprotonated HCCB²⁻ bridges metal centers leading to a double stranded 1D chain. On the other hand, the HCCB²⁻ coordinated thorough carboxylate oxygen and amino nitrogen in 3 to afford a 1D chain whose charge neutrality is maintained by inclusion of aqua-bridged dimer [{Cd(μ-H₂O)(H₂O)₄}₂]⁴⁺. Strong Cu?Cl interaction (2.754 Å) in 5 imposes a coordination geometry that is half-way between the square planar and square pyramidal. The H₃CCB, H₃BCCB and 1-3 and 5 are fluorescent at rt. Thermal studies (TG and DSC) on 1-3 suggested higher stability of 2 relative to 1 and 3 [ΔH_f (kcal/mol), ΔS_f = 152.17, 0.60, 1; 195.56: 0.86, 2; 69.33:0.36, 3].     

Dinuclear triply-bridged copper(II) compounds containing carboxylato bridges and di-2-pyridylamine as a ligand: synthesis, crystal structure, spectroscopic and magnetic properties

Three new triply-bridged dinuclear copper(II) compounds with carboxylato bridges, [Cu₂(μ-O₂CH)(μ-OH)(μ-Cl)(dpyam)₂](PF₆) (1), [Cu₂(μ-O₂CH)₂(μ-OH)(dpyam)₂](PF₆) (2) and [Cu₂(μ-O₂CCH₂CH₃)₂(μ-OH)(dpyam)₂](ClO₄) (3) (dpyam = di-2-pyridylamine) have been synthesized and characterized crystallographically and spectroscopically. Compound 1 consists of a dinuclear unit in which both copper(II) ions are bridged by three different ligands, i.e., formate, chloride and hydroxide anions, providing a distorted trigonal bipyramidal geometry with a CuN₂O₂Cl chromophore. Compounds 2 and 3 have two bridging formato ligands and two bridging propionato ligands, respectively, together with a hydroxo bridge. The carboxylato ligands in both compounds 2 and 3 exhibit different coordination modes. One is in a syn, syn η¹:η¹:μ₂ bridging mode and the other is in a monoatomic bridging mode. The structure of compound 2 involves a dinuclear unit, with a distorted trigonal bipyramidal geometry around each Cu(II) ion with a CuN₂O₃ chromophore. Compound 3 contains a non-centrosymmetric unit; the coordination environment around Cu(1) is a distorted square-pyramidal geometry and an intermediate geometry of sp and tbp around the Cu(II) ion. The Cu?Cu separations are 3.061, 3.113 and 3.006 Å for compounds 1, 2 and 3, respectively. The EPR spectra of all three compounds show a broad isotropic signal with a g value around 2.10.The magnetic susceptibility measurements, measured from 5 to 280 K, revealed a moderate ferromagnetic interaction between the Cu(II) ions with a singlet-triplet energy gap (J) of 79.7, 47.8 and 24.1 cm⁻¹, for compounds 1, 2 and 3, respectively. Also a very weak intermolecular antiferromagnetic interaction was observed between the dinuclear units.     

Axial versus equatorial coordination of thioether sulfur: Mixed ligand copper(II) complexes of 2-pyridyl-N-(2′-methylthiophenyl)-methyleneimine with bidentate diimine ligands

The synthesis, structure and spectral and redox properties of the copper(II) complexes [Cu(pmtpm)Cl₂] (1) and [Cu(pmtpm)₂](ClO₄)₂ (6), where pmtpm is the linear tridentate ligand 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine containing a thioether and two pyridine donors, are described. Also, the mixed ligand complexes [Cu(pmtpm)(diimine)](ClO₄)₂ (2-5), where the diimine is 2,2′-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3), 2,9-dimethyl-1,10-phenanthroline (2,9-dmp) (4) or dipyrido-[3,2-d:2′,3′-f]-quinoxaline (dpq) (5), have been isolated and studied. The X-ray crystal structures of the complexes 1, [Cu(pmtpm)(2,9-dmp)](ClO₄)₂4 and 6 have been successfully determined. The complex 1 possesses a trigonal bipyramidal distorted square based pyramidal (TBDSBP) coordination geometry in which three corners of the square plane are occupied by two nitrogens and thioether s of pmtpm ligand and the remaining equatorial and the axial positions by two chloride ions. The complex 4 contains a CuN₄S chromophore also with a TBDSBP coordination geometry in which two nitrogens and the thioether sulfur of pmtpm ligand occupy three corners of the square plane. One of the two nitrogens of 2,9-dmp ligand is equatorially coordinated and the other axially to copper. On the other hand, the complex 6 is found to possess a square based pyramidal distorted trigonal bipyramidal (SPDTBP) coordination geometry. The CuN₂S trigonal plane in it is comprised of the pyridine and imine nitrogens and the thioether sulfur of the pmtpm ligand. The pyridine nitrogens of the ligand occupy the axial positions and the second thioether sulfur remains uncoordinated. On long standing in acetonitrile solution the mixed ligand complexes 2 and 3 undergo ligand disproportionation to provide the corresponding bis-complexes of bpy and phen, respectively, and 6. The electronic and EPR spectral parameters and the positive redox potential of complex 4 are consistent with the equatorial location of the thioether sulfur in the square-based coordination geometry around copper(II). On the other hand, the higher g_∥ and lower A_∥ values and lower E_1/2 values for the complexes 2, 3 and 5 are consistent with the axial coordination of the thioether sulfur. Also, the Cu(II)/Cu(I) redox potentials increase with increase in number of aromatic rings of the diimine ligand. The steric and electronic effects of the bidentate diimine ligands in orienting the thioether coordination to axial or equatorial position are discussed.