<Emphasis Type="Italic">In vitro</Emphasis> sucrose concentration influences microtuber production and diosgenin content in white yam (<Emphasis Type="Italic">Dioscorea rotundata</Emphasis> Poir)

Dioscorea spp. is an important food crop in many countries and the source of the phytochemical diosgenin. Efficient microtuber production could provide source materials for farm-planting stock, for food markets, and for the production of high-diosgenin-producing cultivars. The first step in this study was optimizing the plant growth regulators for plantlet production, followed by a study of the effects of sucrose concentration on microtuber induction and diosgenin production. Significantly, more shoots (3.5) were produced at 4.65 μM (1 mg L^?1) kinetin (KIN), longer shoots (4.1 cm) were obtained at 2.46 μM (0.5 mg L^?1) indole-3-butyric acid (IBA), and root number (3.9) was significantly higher at 5.38 μM (1 mg L^?1) naphthalene acetic acid (NAA) than in other treatments. Increased sucrose concentrations in the optimized growth medium with 4.65 μM KIN and 5.38 μM NAA had significant effects on microtuber production (p < 0.01) and diosgenin content (p < 0.05). The most microtubers (6.2) were obtained with 100 g L^?1 sucrose, while those on 80 g L^?1 sucrose were the heaviest (0.7 g) and longest (7.4 mm). Microtubers formed in medium with 80 g L^?1 sucrose had significantly higher diosgenin content (3.64% [w/w]) than those in other sucrose treatments (< 2%) and was similar to that of field-grown parent tubers (3.79%). This result indicates an important role for sucrose in both microtuber growth and diosgenin production. Medium containing 4.65 μM KIN and 5.38 μM NAA is recommended for plantlet production, and medium containing 80 g L^?1 sucrose is recommended for microtuber and diosgenin production.     

Enhanced citric acid production by a yeast <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> over-expressing a pyruvate carboxylase gene

In this study, after the expression of a pyruvate carboxylase gene (PYC) cloned from Meyerozyma guilliermondii in a marine-derived yeast Yarrowia lipolytica SWJ-1b, a transformant PG86 obtained had much higher PYC activity than Y. lipolytica SWJ-1b. At the same time, the PYC gene expression and citric acid (CA) production by the transformant PG86 were also greatly enhanced. When glucose concentration in the medium was 60.0 g L^?1, CA concentration formed by the transformant PG86 was 34.02 g L^?1, leading to a CA yield of 0.57 g g^?1 of glucose. During a 10-L fed-batch fermentation, the final concentration of CA was 101.0 ± 1.3 g L^?1, the yield was 0.89 g g^?1 of glucose, the productivity was 0.42 g L^?1 h^?1 and only 5.93 g L^?1 reducing sugar was left in the fermented medium within 240 h of the fed-batch fermentation. HPLC analysis showed that most of the fermentation products were CA.     

Potential Outdoor Cultivation of Green Microalgae Based on Response to Changing Temperatures and by Combining with Air Temperature Occurrence

In this study, our working hypothesis was to examine whether temperature alters biomass and metabolite production by microalgae according to strain. We also addressed whether it is possible to choose a strain suitable for growing in each season of a given region. A factorial experiment revealed a significant interaction between chlorophylls a and b (Chl a and Chl b), carotenoid/Chl (a?+?b) ratio, biomass and total lipid productivity of six green microalgae (four Chlorella spp., Chlorella sorokiniana and Neochloris oleoabundans) after 15 days at four temperatures. At 39/35 °C, two Chlorella sp. strains (IPR7115 and IPR7117) showed higher total carotenoids/Chl (a?+?b) (0.578 and 0.830), respectively. N. oleoabundans had the highest Chl a (8210 μg L^?1) and Chl b (1909 μg L^?1) at 19/15 °C and highest maximum dry biomass (2900 mg L^?1), specific growth rate (0.538 day^?1) and total lipids (1003 mg L^?1) at 15/8 °C. We applied a method to infer the growth of these six green microalgae in outdoor ponds, as based on their response to changing temperatures and by combining with historical data on day/night air temperature occurrence for a given region. We conclude that the use of regionalized maps based on air temperature is a good strategy for predicting microalgal cultivation in outdoor ponds based on their features and tolerance to changing temperature.     

Production of butanol and isopropanol with an immobilized <Emphasis Type="Italic">Clostridium</Emphasis>

Clostridium beijerinckii optinoii is a Clostridium species that produces butanol, isopropanol and small amounts of ethanol. This study compared the performances of batch and continuous immobilized cell fermentations, investigating how media flow rates and nutritional modification affected solvent yields and productivity. In 96-h batch cultures, with 80 % of the 30 g L^?1 glucose consumed in synthetic media, solvent concentration was 9.45 g L^?1 with 66.0 % as butanol. In a continuous fermentation using immobilized C. beijerinckii optinoii cells, also with 80 % of 30 g L^?1 glucose utilization, solvent productivity increased to 1.03 g L^?1 h^?1. Solvent concentration reached 12.14 g L^?1 with 63.0 % as butanol. Adjusting the dilution rate from 0.085 to 0.050 h^?1 to allow extended residence time in column was required when glucose concentration in fresh media was increased from 30 to 50 g L^?1. When acetate was used to improve the buffer capacity in media, the solvent concentration reached 12.70 on 50 g L^?1 glucose. This continuous fermentation using immobilized cells showed technical feasibility for solvent production.     

Engineering rTCA pathway and C4-dicarboxylate transporter for <Emphasis Type="SmallCaps">l</Emphasis>-malic acid production

l-Malic acid is an important component of a vast array of food additives, antioxidants, disincrustants, pharmaceuticals, and cosmetics. Here, we presented a pathway optimization strategy and a transporter modification approach to reconstruct the l-malic acid biosynthesis pathway and transport system, respectively. First, pyruvate carboxylase (pyc) and malate dehydrogenase (mdh) from Aspergillus flavus and Rhizopus oryzae were combinatorially overexpressed to construct the reductive tricarboxylic acid (rTCA) pathway for l-malic acid biosynthesis. Second, the l-malic acid transporter (Spmae) from Schizosaccharomyces pombe was engineered by removing the ubiquitination motification to enhance the l-malic acid efflux system. Finally, the l-malic acid pathway was optimized by controlling gene expression levels, and the final l-malic acid concentration, yield, and productivity were up to 30.25 g L^?1, 0.30 g g^?1, and 0.32 g L^?1 h^?1 in the resulting strain W4209 with CaCO₃ as a neutralizing agent, respectively. In addition, these corresponding parameters of pyruvic acid remained at 30.75 g L^?1, 0.31 g g^?1, and 0.32 g L^?1 h^?1, respectively. The metabolic engineering strategy used here will be useful for efficient production of l-malic acid and other chemicals.     

Promotion of shoot regeneration of <Emphasis Type="Italic">Swertia chirata</Emphasis> by biosynthesized silver nanoparticles and their involvement in ethylene interceptions and activation of antioxidant activity

A complete protocol for the in vitro induction of Eclipta alba tetraploids has been optimized to enhance the wedelolactone content, an anti-cancerous compound. The effects of different concentrations of colchicine (0, 0.01, 0.05, 0.1, 0.2 and 0.3%; w/v) along with treatment durations (12, 24, 36 and 48 h) were investigated on shoot tip (ST) and nodal segment (NS). The treated explants were then incubated on Murashige and Skoog (MS) medium having 1.5 mg L^?1 N⁶-benzylaminopurine and 0.5 mg L^?1 α-napthalene acetic acid for shoot regeneration and afterward root was induced on 1.0 mg L^?1 indole-3-acetic acid enriched ½MS medium. The tetraploids of E. alba were proficiently induced by the treatment of 0.1% colchicine for 24 h. The highest tetraploid induction efficiency was obtained from ST (30.56%) in comparison to the NS (22.22%). Analysis by spectrophotometry and flow cytometry showed that colchicine treated plants contained higher quantity of DNA than diploid plants. Cytological studies demonstrated doubled the chromosome number in tetraploids (2n?=?4x?=?44) than diploids (2n?=?2x?=?22). The ploidy level enhancement lead to alteration of other traits, like increased plant height, stem diameter, leaf size, stomatal size and chlorophyll content. As determined through high performance thin-layer chromatography, the ultimate achievement of this technique is the higher accumulation of wedelolactone in tetraploid plants (300.32 µg g^?1 dry weight) in evaluation to in vitro diploid (131.31 µg g^?1 dry weight) and in vivo diploid mother plants (93.26 µg g^?1 dry weight), thus improving the pharmaceutical value of E. alba.     

Oxygen transfer as a tool for fine-tuning recombinant protein production by <Emphasis Type="Italic">Pichia pastoris</Emphasis> under glyceraldehyde-3-phosphate dehydrogenase promoter

Effects of oxygen transfer on recombinant protein production by Pichia pastoris under glyceraldehyde-3-phosphate dehydrogenase promoter were investigated. Recombinant glucose isomerase was chosen as the model protein. Two groups of oxygen transfer strategies were applied, one of which was based on constant oxygen transfer rate where aeration rate was Q _O/V = 3 and 10 vvm, and agitation rate was N = 900 min^?1; while the other one was based on constant dissolved oxygen concentrations, C _DO = 5, 10, 15, 20 and 40 % in the fermentation broth, by using predetermined exponential glucose feeding with μ _o = 0.15 h^?1. The highest cell concentration was obtained as 44 g L^?1 at t = 9 h of the glucose fed-batch phase at C _DO = 20 % operation while the highest volumetric and specific enzyme activities were obtained as 4440 U L^?1 and 126 U g^?1 cell, respectively at C _DO = 15 % operation. Investigation of specific enzyme activities revealed that keeping C _DO at 15 % was more advantageous with an expense of relatively higher by-product formation and lower specific cell growth rate. For this strategy, the highest oxygen transfer coefficient and oxygen uptake rate were K _L a = 0.045 s^?1 and OUR = 8.91 mmol m^?3 s^?1, respectively.     

Phytoplankton blooms under dim and cold conditions in freshwater lakes of East Antarctica

The seasonal variations of limnological (water temperature, light availability, turbidity, and chlorophyll a concentration) parameters were recorded continuously from January 2004 to February 2005 at two freshwater lakes: Oyako-ike and Hotoke-ike, Sôya Coast, East Antarctica. Water was in a liquid phase throughout the year, with temperatures ranging from 0 to 10°C. The maximum photosynthetically active radiation in Lake Oyako-ike was 23.16 mol m^?2 day^?1 (at 3.8 m) and Hotoke-ike was 53.01 mol m^?2 day^?1 (at 2.2 m) in summer, and chlorophyll a concentration ranged from ca. 0.5 to 2.5 μg L^?1 (Oyako-ike) and from ca. 0.1 to 0.8 μg L^?1 (Hotoke-ike) during the study period. Increase in chlorophyll a fluorescence occurred under dim-light conditions when the lakes were covered with ice in spring and autumn, but the signals were minimum in ice-free summer in both the lakes. During spring and summer, as a result of decreasing snow cover, the chlorophyll a concentration similarly decreased when PAR was relatively high, following periods of heavy winds. The autumnal and spring increase occurred under different PAR levels (ca. 20-fold and 90-fold stronger, respectively, in autumn in both the lakes). Differences in the autumn and spring increases suggest that the spring algal community is more shade-adapted than the autumn algal community. Antarctic phytoplankton appears especially adapted to low-light levels and inhibited by strong light regimes.     

Long-term nutrient trends and harmful cyanobacterial bloom potential in hypertrophic Lake Taihu,China

Rapid economic development in China’s Lake Taihu basin during the past four decades has accelerated nitrogen (N) and phosphorus (P) loadings to the lake. This has caused a shift from mesotrophic to hypertrophic conditions, symptomized by harmful cyanobacterial blooms (CyanoHABs). The relationships between phytoplankton biomass as chlorophyll a (Chla) and nutrients as total nitrogen (TN) and total phosphorus (TP) were analyzed using historical data from 1992 to 2012 to link the response of CyanoHAB potential to long-term nutrient changes. Over the twenty year study period, annual mean Chla showed significantly positive correlations with both annual mean TN and TP (P < 0.001), reflecting a strong phytoplankton biomass response to changes in nutrient inputs to the lake. However, phytoplankton biomass responded slowly to annual changes in TN after 2002. There was not a well-defined or significant relationship between spring TN and summertime Chla. The loss of a significant fraction of spring N loading due to denitrification likely weakened this relationship. Bioavailability of both N and P during the summer plays a key role in sustaining cyanobacterial blooms. The frequency of occurrence of bloom level Chla (>20 μg L^?1) was compared to TN and TP to determine nutrient-bloom thresholds. A decline in bloom risk is expected if TN remains below 1.0 mg L^?1 and TP below 0.08 mg L^?1.     

Carbon dioxide and poultry waste utilization for production of polyhydroxyalkanoate biopolymers by <Emphasis Type="Italic">Nostoc muscorum</Emphasis> Agardh: a sustainable approach

The new paradigm is to view wastes as resources for sustainable development. In this regard, the feasibility of poultry waste and CO₂ utilization for cultivation of a filamentous nitrogen-fixing cyanobacterium, Nostoc muscorum Agardh, was investigated for production polyhydroxyalkanoates, the biodegradable polymers. This cyanobacterium showed profound rise in biomass yield with up to 10 % CO₂ supply in airstream with an aeration rate of 0.1 vvm. Maximum biomass yield of 1.12 g L^?1 was recorded for 8 days incubation period, thus demonstrating a CO₂ biofixation rate of 0.263 g L^?1 day^?1 at 10 % (v/v) CO₂-enriched air. Poultry litter (PL) supplementation also had a positive impact on the biomass yield. The nutrient removal efficiency of N. muscorum was reflected in the significant reduction in nutrient load of PL over the experimental period. A maximum poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) [P(3HB-co-3HV)] copolymer yield of 774 mg L^?1 (65 % of dry cell wt.), the value almost 11-fold higher than the control, was recorded in 10 g L^?1 PL-supplemented cultures with 10 % CO₂ supply under the optimized condition, thus demonstrating that N. muscorum has good potential for CO₂ biomitigation and poultry waste remediation while simultaneously producing eco-friendly polymers.     

Sweet Sorghum Juice and Bagasse as Feedstocks for the Production of Optically Pure Lactic Acid by Native and Engineered <Emphasis Type="Italic">Bacillus coagulans</Emphasis> Strains

Sweet sorghum is a bioenergy crop that produces large amounts of soluble sugars in its stems (3–7 Mg ha^?1) and generates significant amounts of bagasse (15–20 Mg ha^?1) as a lignocellulosic feedstock. These sugars can be fermented not only to biofuels but also to bio-based chemicals. The market potential of the latter may be higher given the current prices of petroleum and natural gas. The yield and rate of production of optically pure d-(?)- and l-(+)-lactic acid as precursors for the biodegradable plastic polylactide was optimized for two thermotolerant Bacillus coagulans strains. Strain 36D1 fermented the sugars in unsterilized sweet sorghum juice at 50 °C to l-(+)-lactic acid (～150 g L^?1; productivity, 7.2 g L^?1 h^?1). B. coagulans strain QZ19-2 was used to ferment sorghum juice to d-(?)-lactic acid (～125 g L^?1; productivity, 5 g L^?1 h^?1). Carbohydrates in the sorghum bagasse were also fermented after pretreatment with 0.5 % phosphoric acid at 190 °C for 5 min. Simultaneous saccharification and co-fermentation of all the sugars (SScF) by B. coagulans resulted in a conversion of 80 % of available carbohydrates to optically pure lactic acid depending on the B. coagulans strain used as the microbial biocatalyst. Liquefaction of pretreated bagasse with cellulases before SScF (L + SScF) increased the productivity of lactic acid. These results show that B. coagulans is an effective biocatalyst for fermentation of all the sugars present in sweet sorghum juice and bagasse to optically pure lactic acid at high titer and productivity as feedstock for bio-based plastics.     

Cultivation of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> with swine wastewater and potential for algal biodiesel production

In this study, an alga-based simultaneous process of treating swine wastewater (SWW) and producing biodiesel was explored. Chlorella vulgaris (UTEX-265) was employed as a model species, and a SWW-based medium was prepared by dilution with tap water. Chlorella vulgaris grew well in the SWW-based medium, and at optimum dilution ratios, it exceeded the conventional culture medium in terms of biomass concentration and productivity. In eightfold diluted SWW, which supported the maximum growth, biomass productivity was 0.247 g L^?1 day^?1, while the productivity was merely 0.165 g L^?1 day^?1 in standard tris-acetate-phosphorous (TAP) algal medium. In addition, fatty acid methyl ester (FAME) productivity was greater in the SWW-based medium (0.067 versus 0.058 g L^?1 day^?1). This enhanced productivity resulted in more than 95 % removal of both nitrogen and phosphorous. All these show that C. vulgaris cultivation is indeed possible in a nutrient-rich wastewater with appropriate dilution, and in so doing, the wastewater can effectively be treated.     

Growth and palmitoleic acid accumulation of filamentous oleaginous microalgae <Emphasis Type="Italic">Tribonema minus</Emphasis> at varying temperatures and light regimes

Palmitoleic acid (C16:1Δ9), contributes greatly to human health, industrial chemicals and biodiesel. The filamentous oleaginous microalgae Tribonema sp. has been identified as a highly efficient producer of palmitoleic acid. Temperature and light regime were adapted to regulate the palmitoleic acid content in this study. Strain T. minus was able to grow well at all the tested temperatures, even at 5 °C. The optimum temperature for palmitoleic acid accumulation (54.25 % of total fatty acid) was 25 °C. Moreover, both light intensity and photoperiod affect the growth, lipid content and fatty acid files of T. minus. The culture exposed to 240 μmol photons m^?2 s^?1 with a photoperiod of 24:0 showed the highest biomass (6.87 g L^?1) and biggest lipid content (61.27 % of dry weight), whereas the most amount of palmitoleic acid (50.47 % of total fatty acid) was detected at 120 μmol photons m^?2 s^?1. These findings make tangible contributions to culture T. minus for commercial production of lipid or palmitoleic acid.     

Biological CO<Subscript>2</Subscript> fixation using C<Emphasis Type="Italic">hlorella vulgaris</Emphasis> and its thermal characteristics through thermogravimetric analysis

The present research is focused on cultivation of microalgae strain Chlorella vulgaris for bio-fixation of CO₂ coupled with biomass production. In this regard, a single semi-batch vertical tubular photobioreactor and four similar photobioreactors in series have been employed. The concentration of CO₂ in the feed stream was varied from 2 to 12 % (v/v) by adjusting CO₂ to air ratio. The amount of CO₂ capture and algae growth were monitored by measuring decrease of CO₂ concentration in the gas phase, microalgal cell density, and algal biomass production rate. The results show that 4 % CO₂ gives maximum amount of biomass (0.9 g L^?1) and productivity (0.118 g L^?1 day^?1) of C. vulgaris in a single reactor. In series reactors, average productivity per reactor found to be 0.078 g L^?1 day^?1. The maximum CO₂ uptake for single reactor also found with 4 % CO_2, and it is around 0.2 g L^?1 day^?1. In series reactors, average CO₂ uptake is 0.13 g L^?1 day^?1 per reactor. TOC analysis shows that the carbon content of the produced biomass is around 40.67 % of total weight. The thermochemical characteristics of the cultivated C. vulgaris samples were analyzed in the presence of air. All samples burn above 200 °C and the combustion rate become faster at around 600 °C. Almost 98 wt% of the produced biomass is combustible in this range.     

Co-generation of ethanol and <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from corn stalk under a hybrid process

Background

Corn stover, as one important lignocellulosic material, has characteristics of low price, abundant output and easy availability. Using corn stover as carbon source in the fermentation of valuable organic chemicals contributes to reducing the negative environmental problems and the cost of production. In ethanol fermentation based on the hydrolysate of corn stover, the conversion rate of fermentable sugars is at a low level because the native S. cerevisiae does not utilize xylose. In order to increase the conversion rate of fermentable sugars deriving from corn stover, an effective and energy saving biochemical process was developed in this study and the residual xylose after ethanol fermentation was further converted to l-lactic acid.

Results

In the hybrid process based on the hydrolysate of corn stover, the ethanol concentration and productivity reached 50.50 g L^?1 and 1.84 g L^?1 h^?1, respectively, and the yield of ethanol was 0.46 g g^?1. The following fermentation of l-lactic acid provided a product titer of 21.50 g L^?1 with a productivity of 2.08 g L^?1 h^?1, and the yield of l-lactic acid was 0.76 g g^?1. By adopting a blank aeration before the inoculation of B. coagulans LA1507 and reducing the final cell density, the l-lactic acid titer and yield reached 24.25 g L^?1 and 0.86 g g^?1, respectively, with a productivity of 1.96 g L^?1 h^?1.

Conclusions

In this work, the air pumped into the fermentor was used as both the carrier gas for single-pass gas stripping of ethanol and the oxygen provider for the aerobic growth of B. coagulans LA1507. Ethanol was effectively separated from the fermentation broth, while the residual medium containing xylose was reused for l-lactic acid production. As an energy-saving and environmental-friendly process, it introduced a potential way to produce bioproducts under the concept of biorefinery, while making full use of the hydrolysate of corn stover.

     

Process Engineering for High-Cell-Density Cultivation of Lipid Rich Microalgal Biomass of <Emphasis Type="Italic">Chlorella</Emphasis> sp. FC2 IITG

In the present study, process engineering strategy was applied to achieve lipid-rich biomass with high density of Chlorella sp. FC2 IITG under photoautotrophic condition. The strategy involved medium optimization, intermittent feeding of limiting nutrients, dynamic change in light intensity, and decoupling growth and lipid induction phases. Medium optimization was performed using combinations of artificial neural network or response surface methodology with genetic algorithm (ANN-GA and RSM-GA). Further, a fed-batch operation was employed to achieve high cell density with intermittent feeding of nitrate and phosphate along with stepwise increase in light intensity. Finally, mutually exclusive biomass and lipid production phases were decoupled into two-stage cultivation process: biomass generation in first stage under nutrient sufficient condition followed by lipid enrichment through nitrogen starvation. The key findings were as follows: (i) ANN-GA resulted in an increase in biomass titer of 157 % (0.95 g L^?1) in shake flask and 42.8 % (1.0 g L^?1) in bioreactor against unoptimized medium at light intensity of 20 μE m^?2 s^?1; (ii) further optimization of light intensity in bioreactor gave significantly improved biomass titer of 5.6 g L^?1 at light intensity of 250 μE m^?2 s^?1; (iii) high cell density of 13.5 g L^?1 with biomass productivity of 675 mg L^?1 day^?1 was achieved with dynamic increase in light intensity and intermittent feeding of limiting nutrients; (iv) finally, two-phase cultivation resulted in biomass titer of 17.7 g L^?1 and total lipid productivity of 313 mg L^?1 day^?1 which was highest among Chlorella sp. under photoautotrophic condition.     

Antioxidant activity and phenolic profile in filamentous cyanobacteria: the impact of nitrogen

In the present study, ethanolic extracts of ten cyanobacterial strains cultivated under different nitrogen conditions were assessed for the phenolic content and antioxidant activity. The amount of detected phenolic compounds ranged from 14.86 to 701.69 μg g^?1 dry weight (dw) and HPLC-MS/MS analysis revealed gallic acid, chlorogenic acid, quinic acid, catechin, epicatechin, kaempferol, rutin and apiin. Only catechin, among the detected phenolics, was present in all the tested strains, while quinic acid was the most dominant compound in all the tested Nostoc strains. The results also indicated the possibility of increasing the phenolic content in cyanobacterial biomass by manipulating nitrogen conditions, such as in the case of quinic acid in Nostoc 2S7B from 70.83 to 594.43 μg g^?1 dw. The highest radical scavenging activity in DPPH assay expressed Nostoc LC1B with IC₅₀ value of 0.04?±?0.01 mg mL^?1, while Nostoc 2S3B with IC₅₀ =?9.47?±?3.61 mg mL^?1 was the least potent. Furthermore, the reducing power determined by FRAP assay ranged from 8.36?±?0.08 to 21.01?±?1.66 mg AAE g^?1, and it was significantly different among the tested genera. The Arthrospira strains exhibited the highest activity, which in the case of Arthrospira S1 was approximately twofold higher in comparison to those in nitrogen-fixing strains. In addition to this, statistical analysis has indicated that detected phenolics were not major contributor to antioxidant capacities of tested cyanobacteria. However, this study highlights cyanobacteria of the genera Nostoc, Anabaena, and Arthrospira as producers of antioxidants and phenolics with pharmacological and health-beneficial effects, i.e., quinic acid and catechin in particular.     

Xylitol production by genetically modified industrial strain of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> using glycerol as co-substrate

Xylitol is commercially used in chewing gum and dental care products as a low calorie sweetener having medicinal properties. Industrial yeast strain of S. cerevisiae was genetically modified to overexpress an endogenous aldose reductase gene GRE3 and a xylose transporter gene SUT1 for the production of xylitol. The recombinant strain (XP-RTK) carried the expression cassettes of both the genes and the G418 resistance marker cassette KanMX integrated into the genome of S. cerevisiae. Short segments from the 5′ and 3′ delta regions of the Ty1 retrotransposons were used as homology regions for integration of the cassettes. Xylitol production by the industrial recombinant strain was evaluated using hemicellulosic hydrolysate of the corn cob with glucose as the cosubstrate. The recombinant strain XP-RTK showed significantly higher xylitol productivity (212 mg L^?1 h^?1) over the control strain XP (81 mg L^?1 h^?1). Glucose was successfully replaced by glycerol as a co-substrate for xylitol production by S. cerevisiae. Strain XP-RTK showed the highest xylitol productivity of 318.6 mg L^?1 h^?1 and titre of 47 g L^?1 of xylitol at 12 g L^?1 initial DCW using glycerol as cosubstrate. The amount of glycerol consumed per amount of xylitol produced (0.47 mol mol^?1) was significantly lower than glucose (23.7 mol mol^?1). Fermentation strategies such as cell recycle and use of the industrial nitrogen sources were demonstrated using hemicellulosic hydrolysate for xylitol production.     

Improved production of <Emphasis Type="Italic">Oroxylum indicum</Emphasis> (L.) Kurz by altering the salts of the medium

The present study was conducted to test the effects of KNO₃, KH₂PO₄, and CaCl₂ on shoot multiplication, root proliferation, and accumulation of phytochemicals in in vitro cultures of Oroxylum indicum. The results indicate that modifying the MS salt formulation in relation to particular inorganic nutrients highly affected shoot multiplication, root proliferation, and accumulation of flavonoids in in vitro cultures. A concentration of 0.60 g L^?1 CaCl₂ resulted in the highest frequency of shoot regeneration (5.6 shoots per explant). A concentration of 0.40 g L^?1 CaCl₂ resulted in the highest frequency of root regeneration (7.8 roots per shoot). Modifications of the concentrations of inorganic salts were also found to be advantageous for production media for both multiple shoots and shoot-derived root in vitro cultures. Multiple shoots generated on shoot induction medium with a concentration of 0.60 g L^?1 CaCl₂ and roots generated on root induction medium with a concentration of 1.5 g L^?1 KNO₃ yielded about a five times higher flavonoid level than cultures generated on control medium respectively.     

Copper and thermal perturbations on the early life processes of the hard coral <Emphasis Type="Italic">Platygyra acuta</Emphasis>

Anthropogenic pollutants and climate change are major threats to coral reefs today. Yet interactions between chemical and thermal perturbations have not been fully explored in reef studies. Here, we present the single and combined effects of copper (Cu) with thermal stress on five early life-history stages/processes (fertilization, larval mortality, swimming ability, metamorphosis and growth of juvenile recruits) of the massive coral Platygyra acuta in Hong Kong. In the first four experiments, coral gametes and larvae were exposed to different Cu doses (0–200 μg L^?1, apart from the fertilization assay in which 0–1000 μg L^?1 was used) and temperature treatments (ambient and ambient +2 or +3 °C as a thermal stress treatment) following a factorial experimental design. Exposure time was 5 h for the fertilization assay and 48 h for the other experiments. The last experiment on growth of coral recruits was conducted over 56 d with 0–80 μg L^?1 Cu used. Cu significantly reduced percent fertilization success, percentage of active swimming larvae and larval survivorship (EC₅₀s, the half maximal effective concentrations, for percent fertilization success and percentage of active swimming larvae were 92–145 and 45–47 μg L^?1 respectively. While LC₅₀, the lethal concentration that kills 50% of the population, was 101–110 μg L^?1), while growth of coral recruits was not affected at 80 μg L^?1 Cu for 56 d. No settling cues were used in the settlement experiment. In their absence, percent metamorphosis increased with Cu doses, in sharp contrast to earlier findings. Settlement and metamorphosis may thus be strategies for coral larvae to escape from Cu toxicity. Thermal treatment did not significantly affect any experimental end points. This is likely because the thermal regimes used in the experiments were within the range experienced by local corals. The high variability in Cu toxicities indicates differential susceptibilities of the various life-history stages/processes of P. acuta. The level of Cu tolerance was also markedly higher than that reported in the literature for other coral species. This provides evidence to suggest possible adaptation of this species to survive in a highly polluted marine environment like that in Hong Kong.