Synchrotron Protein Footprinting: A Technique to Investigate Protein-Protein Interactions

Abstract

Traditional approaches for macromolecular structure elucidation, including NMR, crystallography and cryo-EM have made significant progress in defining the structures of protein-protein complexes. A substantial number of macromolecular structures, however, have not been examined with atomic detail due to sample size and heterogeneity, or resolution limitations of the technique; therefore, the general applicability of each method is greatly reduced. Synchrotron footprinting attempts to bridge the gap in these methods by monitoring changes in accessible surface areas of discrete macromolecular moieties. As evidenced by our previous studies on RNA folding and DNA-protein interactions, the three-dimensional structure is probed by examining the reactions of these moieties with hydroxyl radicals generated by synchrotron X-rays. Here we report the application of synchrotron foot- printing to the investigation of protein-protein interactions, as the novel technique has been utilized to successfully map the contact sites of gelsolin segment-1 in the gelsolin segment 1/actin complex. Footprinting results demonstrate that phenylalanine 104, located on the actin binding helix of gelsolin segment 1, is protected from hydroxyl radical modification in the presence of actin. This change in reactivity results from the specific protection of gel- solin segment-1, consistent with the substantial decrease in solvent accessibility of F104 upon actin binding, as calculated from the crystal structural of the gelsolin segment 1/actin complex. The results presented here establish synchrotron footprinting as a broadly applicable method to probe structural features of macromolecular complexes that are not amenable to conventional approaches.     

Structural reorganization of proteins revealed by radiolysis and mass spectrometry: G-actin solution structure is divalent cation dependent

The solution structures of isolated monomeric actins in their Mg(2+)-ATP and Ca(2+)-ATP bound forms and in complexes with gelsolin segment-1 have been probed using hydroxyl radicals (*OH) generated by synchrotron X-ray radiolysis. Proteolysis and mass spectrometry analysis of 28 peptides containing 58 distinct reactive probe sites within actin were used to monitor conformational variations linked to divalent cation and gelsolin segment-1 binding. The solvent accessibilities of the probe sites, as measured by footprinting in solution for the Ca(2+)-G-actin and Mg(2+)-G-actin complexes with gelsolin segment-1, were consistent with available crystallographic data. This included a specific protection at the contact interface between the partners, as revealed by reduced reactivity of peptide 337-359 in the complex. Aside from the specific protection indicated previously, the oxidation rates for the reactive residues of the isolated Ca(2+)-G-actin were similar to those of the actin gelsolin segment-1 complexes; however, the reactivity of numerous residues in the isolated Mg(2+)-G-actin form was significantly reduced. Specifically, Mg(2+)-G-actin has a set of protected sites relative to Ca(2+)-G-actin that suggest a structural reorganization in subdomains 4 and 2 and a C-terminus more closely packed onto subdomain 1. These conformational variations for isolated Mg(2+)-G-actin provide a structural basis for its greater tendency to polymerize into filaments as compared to Ca(2+)-G-actin.     

Structure of an F-actin trimer disrupted by gelsolin and implications for the mechanism of severing

Stable oligomers of filamentous actin were obtained by cross-linking F-actin with 1,4-N,N'-phenylenedimaleimide and depolymerization with excess segment-1 of gelsolin. Segment-1-bound and cross-linked actin oligomers containing either two or three actin subunits were purified and shown to nucleate actin assembly. Kinetic assembly data from mixtures of monomeric actin and the actin oligomers fit a nucleation model where cross-linked actin dimer or trimer reacts with an actin monomer to produce a competent nucleus for filament assembly. We report the three-dimensional structure of the segment-1-actin hexamer containing three actin subunits, each with a tightly bound ATP. Comparative analysis of this structure with twelve other actin structures provides an atomic level explanation for the preferential binding of ATP by the segment-1-complexed actin. Although the structure of segment-1-bound actin trimer is topologically similar to the helical model of F-actin (1), it has a distorted symmetry compared with that of the helical model. This distortion results from intercalation of segment-1 between actin protomers that increase the rise per subunit and rotate each of the actin subunits relative to their positions in F-actin. We also show that segment-1 of gelsolin is able to sever actin filaments, although the severing activity of segment-1 is significantly lower than full-length gelsolin.     

Modeling of protein binary complexes using structural mass spectrometry data

In this article, we describe a general approach to modeling the structure of binary protein complexes using structural mass spectrometry data combined with molecular docking. In the first step, hydroxyl radical mediated oxidative protein footprinting is used to identify residues that experience conformational reorganization due to binding or participate in the binding interface. In the second step, a three-dimensional atomic structure of the complex is derived by computational modeling. Homology modeling approaches are used to define the structures of the individual proteins if footprinting detects significant conformational reorganization as a function of complex formation. A three-dimensional model of the complex is constructed from these binary partners using the ClusPro program, which is composed of docking, energy filtering, and clustering steps. Footprinting data are used to incorporate constraints-positive and/or negative-in the docking step and are also used to decide the type of energy filter-electrostatics or desolvation-in the successive energy-filtering step. By using this approach, we examine the structure of a number of binary complexes of monomeric actin and compare the results to crystallographic data. Based on docking alone, a number of competing models with widely varying structures are observed, one of which is likely to agree with crystallographic data. When the docking steps are guided by footprinting data, accurate models emerge as top scoring. We demonstrate this method with the actin/gelsolin segment-1 complex. We also provide a structural model for the actin/cofilin complex using this approach which does not have a crystal or NMR structure.     

Molecular dynamics study of interactions between polymorphic actin filaments and gelsolin segment-1

The assembly of protein actin into double-helical filaments promotes many eukaryotic cellular processes that are regulated by actin-binding proteins (ABPs). Actin filaments can adopt multiple conformations, known as structural polymorphism, which possibly influences the interaction between filaments and ABPs. Gelsolin is a Ca²⁺-regulated ABP that severs and caps actin filaments. Gelsolin binding modulates filament structure; however, it is not known how polymorphic actin filament structures influence an interaction of gelsolin S1 with the barbed-end of filament. Herein, we investigated how polymorphic structures of actin filaments affect the interactions near interfaces between the gelsolin segment 1 (S1) domain and the filament barbed-end. Using all-atom molecular dynamics simulations, we demonstrate that different tilted states of subunits modulate gelsolin S1 interactions with the barbed-end of polymorphic filaments. Hydrogen bonding and interaction energy at the filament-gelsolin S1 interface indicate distinct conformations of filament barbed ends, resulting in different interactions of gelsolin S1. This study demonstrates that filament's structural multiplicity plays important roles in the interactions of actin with ABPs.     

Essential functions and actin-binding surfaces of yeast cofilin revealed by systematic mutagenesis.

Cofilin stimulates actin filament turnover in vivo. The phenotypes of twenty yeast cofilin mutants generated by systematic mutagenesis were determined. Ten grew as well as the wild type and showed no cytoskeleton defects, seven were recessive-lethal and three were conditional-lethal and caused severe actin organization defects. Biochemical characterization of interactions between nine mutant yeast cofilins and yeast actin provided evidence that F-actin binding and depolymerization are essential cofilin functions. Locating the mutated residues on the yeast cofilin molecular structure allowed several important conclusions to be drawn. First, residues required for actin monomer binding are proximal to each other. Secondly, additional residues are required for interactions with actin filaments; these residues might bind an adjacent subunit in the actin filament. Thirdly, despite striking structural similarity, cofilin interacts with actin in a different manner from gelsolin segment-1. Fourthly, a previously unrecognized cofilin function or interaction is suggested by identification of spatially proximal residues important for cofilin function in vivo, but not for actin interactions in vitro. Finally, mutation of the cofilin N-terminus suggests that its sequence is conserved because of its critical role in actin interactions, not because it is sometimes a target for protein kinases.     

Structural analysis of gelsolin using synchrotron protein footprinting

Protein footprinting provides detailed structural information on protein structure in solution by directly identifying accessible and hydroxyl radical-reactive side chain residues. Radiolytic generation of hydroxyl radicals using millisecond pulses of a synchrotron "white" beam results in the formation of stable side chain oxidation products, which can be digested with proteases for mass spectrometry (MS) analysis. Liquid chromatography-coupled MS and tandem MS methods allow for the quantitation of the ratio of modified and unmodified peptides and identify the specific side chain probes that are oxidized, respectively. The ability to monitor the changes in accessibility of multiple side chain probes by monitoring increases or decreases in their oxidation rates as a function of ligand binding provides an efficient and powerful tool for analyzing protein structure and dynamics. In this study, we probe the detailed structural features of gelsolin in its "inactive" and Ca2+-activated state. Oxidation rate data for 81 peptides derived from the trypsin digestion of gelsolin are presented; 60 of these peptides were observed not to be oxidized, and 21 had detectable oxidation rates. We also report the Ca2+-dependent changes in oxidation for all 81 peptides. Fifty-nine remained unoxidized, five increased their oxidation rate, and two experienced protections. Tandem mass spectrometry was used to identify the specific side chain probes responsible for the Ca2+-insensitive and Ca2+-dependent responses. These data are consistent with crystallographic data for the inactive form of gelsolin in terms of the surface accessibility of reactive residues within the protein. The results demonstrate that radiolytic protein footprinting can provide detailed structural information on the conformational dynamics of ligand-induced structural changes, and the data provide a detailed model for gelsolin activation.     

Identification of a region in segment 1 of gelsolin critical for actin binding.

The actin severing and capping protein gelsolin contains three distinct actin binding sites. The smallest actin binding domain of approximately 15,000 Mr was originally obtained by limited proteolysis and it corresponds to the first of six repeating segments contained in the gelsolin sequence. We have expressed this domain (here termed segment 1 or N150 to define its amino acid length) in Escherichia coli, together with a series of smaller mutants truncated at either N- or C-terminal ends, in an attempt to localize residues critical of actin binding. Limited truncation of segment 1 by 11 residues at its N-terminal end has no observable effect on actin binding, but on removal of a further eight residues, actin binding is totally eliminated. Although this loss of actin binding may reflect ablation of critical residues, we cannot rule out the possibility that removal of these residues adversely affects the folding of the polypeptide chain during renaturation. Truncation at the C-terminus of segment 1 has a progressive effect on actin binding. Unlike intact segment 1, which shows no calcium sensitivity of actin binding within the resolution of our assays, a mutant with 19 residues deleted from its C-terminus shows unchanged affinity for actin in the presence of calcium, but approximately 100-fold weaker binding in its absence. Removal of an additional five residues from the C-terminus produces a mutant that binds actin only in calcium. Further limited truncation results in progressively weaker calcium dependent binding and all binding is eliminated when a total of 29 residues has been removed. Although none of the expressed proteins on their own binds calcium, 45Ca is trapped in the complexes, including the complex between actin and segment 1 itself. These results highlight a region close to the C-terminus of segment 1 that is essential for actin binding and demonstrate that calcium plays an important role in the high affinity actin binding by this domain of gelsolin.     

Cross-linked long-pitch actin dimer forms stoichiometric complexes with gelsolin segment 1 and/or deoxyribonuclease I that nonproductively interact with myosin subfragment 1

Actin dimer cross-linked along the long pitch of the F-actin helix by N-(4-azido)-2-nitrophenyl (ANP) was purified by gel filtration. Purified dimers were found to polymerize on increasing the ionic strength, although at reduced rate and extent in comparison with native actin. Purified actin dimer interacts with the actin-binding proteins (ABPs) deoxyribonuclease I (DNase I) and gelsolin segment-1 (G1) as analyzed by gel filtration and native gel electrophoresis. Complex formation of the actin dimer with these ABPs inhibits its ability to polymerize. The interaction with rabbit skeletal muscle myosin subfragment 1 (S1) was analyzed for polymerized actin dimer and dimer complexed with gelsolin segment 1 or DNase I by measurement of the actin-stimulated myosin S1-ATPase and gel filtration. The data obtained indicate binding of subfragment 1 to actin dimer, albeit with considerably lower affinity than to F-actin. Polymerized actin dimer was able to stimulate the S1-ATPase activity to about 50% of the level of native F-actin. In contrast, the actin dimer complexed to DNase I or gelsolin segment 1 or to both proteins was unable to significantly stimulate the S1-ATPase. Similarly, G1:dimer complex at 20 microM stimulated the rate of release of subfragment 1 bound nucleotide (mant-ADP) only 1.6-fold in comparison to about 9-fold by native F-actin at a concentration of 0.5 microM. Using rapid kinetic techniques, a dissociation constant of 2.4 x 10 (-6) M for subfragment 1 binding to G1:dimer was determined in comparison to 3 x 10 (-8) M for native F-actin under identical conditions. Since the rate of association of subfragment 1 to G1:dimer was considerably lower than to native F-actin, we suspect that the ATP-hydrolysis by S1 was catalyzed before its association to the dimer. These data suggest an altered, nonproductive mode for the interaction of subfragment 1 with the isolated long-pitch actin dimer.     

Sequential binding of actin monomers to plasma gelsolin and its inhibition by vitamin D-binding protein

Functional studies that distinguish free from actin-bound gelsolin based on the ability of the former to sever actin filaments reveal that the binding of actin monomers to gelsolin is highly cooperative and can be prevented by prior incubation of actin with vitamin D-binding protein (DBP), even though the apparent affinity of gelsolin for actin is 50-fold greater than that of DBP. Measurements of actin binding by immunoprecipitation and pyrene-actin fluorescence establish that DBP-actin complexes do not bind to gelsolin and that DBP removes one of the actin monomers in a 2:1 actin-gelsolin complex. These studies may explain why DBP-actin complexes exist in blood plasma in vivo in the presence of free gelsolin and suggest that the interaction of gelsolin with actin in cells and plasma may be regulated in part by actin monomer binding proteins.     

Interactions of gelsolin and gelsolin-actin complexes with actin. Effects of calcium on actin nucleation, filament severing, and end blocking

Gelsolin is a calcium binding protein that shortens actin filaments. This effect occurs in the presence but not in the absence of micromolar calcium ion concentrations and is partially reversed following removal of calcium ions. Once two actin molecules have bound to gelsolin in solutions containing Ca2+, one of the actins remains bound following chelation of calcium, so that the reversal of gelsolin's effect cannot be accounted for simply by its dissociation from the ends of the shortened filaments to allow for elongation. In this paper, the interactions with actin of the ethylene glycol bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) stable 1:1 gelsolin-actin complexes are compared with those of free gelsolin. The abilities of free or complexed gelsolin to sever actin filaments, nucleate filament assembly, bind to the fast growing (+) filament ends, and lower the filament size distribution in the presence of either Ca2+ or EGTA were examined. The results show that both free gelsolin and gelsolin-actin complexes are highly dependent on Ca2+ concentration when present in a molar ratio to actin less than 1:50. The gelsolin-actin complexes, however, differ from free gelsolin in that they have a higher affinity for (+) filament ends in EGTA and they cannot sever filaments in calcium. The limited reversal of actin-gelsolin binding following removal of calcium and the calcium sensitivity of nucleation by complexes suggest an alternative to reannealing of shortened filaments that involves redistribution of actin monomers and may account for the calcium-sensitive functional reversibility of the solation of actin by gelsolin.     

Hydroxyl radical footprints reveal novel structural features around the NF I binding site in adenovirus DNA.

We have identified a number of as yet unknown structural abnormalities of the NF I-DNA binding site within the inverted terminal repetition of adenovirus DNA by probing it with a hydroxyl radical footprinting technique. NF I binding alters the accessibility of the deoxyribose moieties to hydroxyl radicals both at the 3' and at the 5' side of the recognition sequence 5'-TGG(N)6GCCAA-3'. A smooth bend at the 5' side of the binding sequence is already present in naked linear DNA and it is further enhanced by protein binding. This could be demonstrated not only by hydroxyl radical footprinting but also by studying the temperature dependent mobility during gel electrophoresis of DNA fragments carrying the NF I binding site at circularly permutated positions. We propose that the bent conformation at this site is responsible for facilitating protein/DNA interactions.     

Mapping the cofilin binding site on yeast G-actin by chemical cross-linking

Cofilin is a major cytoskeletal protein that binds to both monomeric actin (G-actin) and polymeric actin (F-actin) and is involved in microfilament dynamics. Although an atomic structure of the G-actin-cofilin complex does not exist, models of the complex have been built using molecular dynamics simulations, structural homology considerations, and synchrotron radiolytic footprinting data. The hydrophobic cleft between actin subdomains 1 and 3 and, alternatively, the cleft between actin subdomains 1 and 2 have been proposed as possible high-affinity cofilin binding sites. In this study, the proposed binding of cofilin to the subdomain 1/subdomain 3 region on G-actin has been probed using site-directed mutagenesis, fluorescence labeling, and chemical cross-linking, with yeast actin mutants containing single reactive cysteines in the actin hydrophobic cleft and with cofilin mutants carrying reactive cysteines in the regions predicted to bind to G-actin. Mass spectrometry analysis of the cross-linked complex revealed that cysteine 345 in subdomain 1 of mutant G-actin was cross-linked to native cysteine 62 on cofilin. A cofilin mutant that carried a cysteine substitution in the α3-helix (residue 95) formed a cross-link with residue 144 in actin subdomain 3. Distance constraints imposed by these cross-links provide experimental evidence for cofilin binding between actin subdomains 1 and 3 and fit a corresponding docking-based structure of the complex. The cross-linking of the N-terminal region of recombinant yeast cofilin to actin residues 346 and 374 with dithio-bis-maleimidoethane (12.4 Å) and via disulfide bond formation was also documented. This set of cross-linking data confirms the important role of the N-terminal segment of cofilin in interactions with G-actin.     

Calcium-induced conformational changes in the C-terminal half of gelsolin stabilize its interaction with the actin monomer

The basic mechanism for the nucleating effect of gelsolin on actin polymerization is the formation of a complex of gelsolin with two actin monomers. Probably due to changes in the C-terminal part of gelsolin, a stable ternary complex is only formed at [Ca(2+)] >10(-5) M [Khaitlina, S., and Hinssen, H. (2002) FEBS Lett. 521, 14-18]. Therefore, we have studied the binding of actin monomer to the isolated C-terminal half of gelsolin (segments 4-6) over a wide range of calcium ion concentrations to correlate the conformational changes to the complex formation. With increasing [Ca(2+)], the apparent size of the C-terminal half as determined by gel filtration was reduced, indicating a transition into a more compact conformation. Moreover, Ca(2+) inhibited the cleavage by trypsin at Lys 634 within the loop connecting segments 5 and 6. Though the inhibitory effect was observed already at [Ca(2+)] of 10(-7) M, it was enhanced with increasing [Ca(2+)], attaining saturation only at >10(-4) M Ca(2+). This indicates that the initial conformational changes are followed by additional molecular transitions in the range of 10(-5)-10(-4) M [Ca(2+)]. Consistently, preformed complexes of actin with the C-terminal part of gelsolin became unstable upon lowering the calcium ion concentrations. These data provide experimental support for the role of the type 2 Ca-binding sites in gelsolin segment 5 proposed by structural studies [Choe et al. (2002) J. Mol. Biol. 324, 691]. We assume that the observed structural transitions contribute to the stable binding of the second actin monomer in the ternary gelsolin-actin complex.     

Capping and dynamic relation between domains 1 and 2 of gelsolin

Gelsolin is a protein that severs and caps actin filaments. The two activities are located in the N-terminal half of the gelsolin molecules. Severing and subsequent capping requires the binding of domains 2 and 3 (S2–3) to the side of the filaments to position the N-terminal domain 1 (S1) at the barbed end of actin (actin subdomains 1 and 3). The results provide a structural basis for the gelsolin capping mechanism. The effects of a synthetic peptide derived from the sequence of a binding site located in gelsolin S2 on actin properties have been studied. CD and IR spectra indicate that this peptide presented a secondary structure in solution which would be similar to that expected for the native full length gelsolin molecule. The binding of the synthetic peptide induces conformational changes in actin subdomain 1 and actin oligomerization. An increase in the polymerization rate was observed, which could be attributed to a nucleation kinetics effect. The combined effects of two gelsolin fragments, the synthetic peptide derived from an S2 sequence and the purified segment 1 (S1), were also investigated as a molecule model. The two fragments induced nucleation enhancement and inhibited actin depolymerization, two characteristic properties of capping. In conclusion, for the first time it is reported that the binding of a small synthetic fragment is sufficient to promote efficient capping by S1 at the barbed end of actin filaments. ©1998 European Peptide Society and John Wiley & Sons, Ltd.     

Actin-binding proteins--a unifying hypothesis

Actin participates in more protein-protein interactions than any other known protein, including the interaction of actin with itself to form the helical polymer F-actin. The vast majority of actin-binding proteins (ABPs) can be grouped into conserved families. Only a handful of structures of complexes of actin with ABPs have been determined so far. These structures are starting to reveal how certain ABPs, including gelsolin, vitamin D-binding protein and Wiskott-Aldrich syndrome protein (WASP)-homology domain-2-related proteins, share a common actin-binding motif. It is proposed here that other ABPs, including actin itself, might share this motif, providing a mechanism whereby ABPs and actin compete for a common binding site. Of particular interest is a hydrophobic pocket that mediates important interactions in five of the existing structures of actin complexes. As the pocket remains accessible in F-actin, it is proposed that this pocket represents a primary target for F-actin-binding proteins, such as calponin-homology-related proteins and myosin.     

The structural determinants of macrolide-actin binding: in silico insights

By the use of x-ray structures and flexible docking, we have developed the first in silico ligand-based view of the structural determinants of the binding of small molecule mimics of gelsolin, natural products bound to actin. Our technique highlights those residues on the actin binding site forming important hydrophobic and hydrogen-bonding interactions with the ligands. Significantly, through the flexible docking of toxin fragments, we have also identified potential residues on the actin binding site that have yet to be exploited. Guided by these observations, we have demonstrated that kabiramide C can be modified to produce a structure with a predicted binding energy increased by 20% while the molecular mass is reduced by 20%, clearly indicating the potential for future elaboration of structures targeting this important component of the cytoskeleton.     

Expression of human plasma gelsolin in Escherichia coli and dissection of actin binding sites by segmental deletion mutagenesis

Human plasma gelsolin has been expressed in high yield and soluble form in Escherichia coli. The protein has nucleating and severing activities identical to those of plasma gelsolin and is fully calcium sensitive in its interactions with monomeric actin. A number of deletion mutants have been expressed to explore the function of the three actin binding sites. Their design is based on the sixfold segmental repeat in the protein sequence. (These sites are located in segment 1, segments 2-3, and segments 4-6). Two mutants, S1-3 and S4-6, are equivalent to the NH2- and COOH-terminal halves of the molecule obtained by limited proteolysis. S1-3 binds two actin monomers in the presence or absence of calcium, it severs and caps filaments but does not nucleate polymerization. S4-6 binds a single actin monomer but only in calcium. These observations confirm and extend current knowledge on the properties of the two halves of gelsolin. Two novel constructs have also been studied that provide a different pairwise juxtaposition of the three sites. S2-6, which lacks the high affinity site of segment 1 (equivalent to the 14,000-Mr proteolytic fragment) and S1,4-6, which lacks segments 2-3 (the actin filament binding domain previously identified using the 28,000-Mr proteolytic fragment). S2-6 binds two actin monomers in calcium and nucleates polymerization; it associates laterally with filaments in the presence or absence of calcium and has a weak calcium-dependent fragmenting activity. S1,4-6 also binds two actin monomers in calcium and one in EGTA, has weak severing activity but does not nucleate polymerization. A model is presented for the involvement of the three binding sites in the various activities of gelsolin.     

Structural basis for the higher Ca(2+)-activation of the regulated actin-activated myosin ATPase observed with Dictyostelium/Tetrahymena actin chimeras

Replacement of residues 228-230 or 228-232 of subdomain 4 in Dictyostelium actin with the corresponding Tetrahymena sequence (QTA to KAY replacement: half chimera-1; QTAAS to KAYKE replacement: full chimera) leads to a higher Ca(2+)-activation of the regulated acto-myosin subfragment-1 ATPase activity. The ratio of ATPase activation in the presence of tropomyosin-troponin and Ca(2+) to that without tropomyosin-troponin becomes about four times as large as the ratio for the wild-type actin. To understand the structural basis of this higher Ca(2+)-activation, we have determined the crystal structures of the 1:1 complex of Dictyostelium mutant actins (half chimera-1 and full chimera) with gelsolin segment-1 to 2.0 A and 2.4 A resolution, respectively, together with the structure of wild-type actin as a control. Although there were local changes on the surface of the subdomain 4 and the phenolic side-chain of Tyr230 displaced the side-chain of Leu236 from a non-polar pocket to a more solvent-accessible position, the structures of the actin chimeras showed that the mutations in the 228-232 region did not introduce large changes in the overall actin structure. This suggests that residues near position 230 formed part of the tropomyosin binding site on actin in actively contracting muscle. The higher Ca(2+)-activation observed with A230Y-containing mutants can be understood in terms of a three-state model for thin filament regulation in which, in the presence of both Ca(2+) and myosin heads, the local changes of actin generated by the mutation (especially its phenolic side-chain) facilitate the transition of thin filaments from a "closed" state to an "open" state. Between 394 and 469 water molecules were identified in the different structures and it was found that actin recognizes hydrated forms of the adenine base and the Ca ion in the nucleotide binding site.     

Mapping the ADF/cofilin binding site on monomeric actin by competitive cross-linking and peptide array: evidence for a second binding site on monomeric actin

The binding sites for actin depolymerising factor (ADF) and cofilin on G-actin have been mapped by competitive chemical cross-linking using deoxyribonuclease I (DNase I), gelsolin segment 1 (G1), thymosin beta4 (Tbeta4), and vitamin D-binding protein (DbP). To reduce ADF/cofilin induced actin oligomerisation we used ADP-ribosylated actin. Both vitamin D-binding protein and thymosin beta4 inhibit binding by ADF or cofilin, while cofilin or ADF and DNase I bind simultaneously. Competition was observed between ADF or cofilin and G1, supporting the hypothesis that cofilin preferentially binds in the cleft between sub-domains 1 and 3, similar to or overlapping the binding site of G1. Because the affinity of G1 is much higher than that of ADF or cofilin, even at a 20-fold excess of the latter, the complexes contained predominantly G1. Nevertheless, cross-linking studies using actin:G1 complexes and ADF or cofilin showed the presence of low concentrations of ternary complexes containing both ADF or cofilin and G1. Thus, even with monomeric actin, it is shown for the first time that binding sites for both G1 and ADF or cofilin can be occupied simultaneously, confirming the existence of two separate binding sites. Employing a peptide array with overlapping sequences of actin overlaid by cofilin, we have identified five sequence stretches of actin able to bind cofilin. These sequences are located within the regions of F-actin predicted to bind cofilin in the model derived from image reconstructions of electron microscopical images of cofilin-decorated filaments. Three of the peptides map to the cleft region between sub-domains 1 and 3 of the upper actin along the two-start long-pitch helix, while the other two are in the DNase I loop corresponding to the site of the lower actin in the helix. In the absence of any crystal structures of ADF or cofilin in complex with actin, these studies provide further information about the binding sites on F-actin for these important actin regulatory proteins.