The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19.

Summary pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 by direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 by direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pT1319 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.     

The large Bacillus plasmid pTB19 contains two integrated rolling-circle plasmids carrying mobilization functions

Plasmid pTB19 is a 27-kb plasmid originating from a thermophilic Bacillus species. It was shown previously that pTB19 contains an integrated copy of the rolling-circle type plasmid pTB913. Here we describe the analysis of a 4324-bp region of pTB19 conferring resistance to tetracycline. The nucleotide sequence of this region revealed all the characteristics of a second plasmid replicating via the rolling-circle mechanism. This sequence contained (i) the tetracycline resistance marker of pTB19, which is highly similar to other tetL-genes of gram-positive bacteria; (ii) a hybrid mob gene, which bears relatedness to both the mob-genes of pUB110 and pTB913; (iii) a palU type minus origin identical to those of pUB110 and pTB913; and (iv) a plus origin of replication similar to that of pTB913. A repB-type replication initiation gene sequence identical to that of pTB913 was present, which lacked the middle part (492 bp), thus preventing autonomous replication of this region. The hybrid mob gene was functional in conjugative mobilization of plasmids between strains of Bacillus subtilis.     

Two replication determinants of an antibiotic-resistance plasmid, pTB19, from a thermophilic bacillus

Two different replication determinants were found on an antibiotic resistance plasmid, pTB19, from a thermophilic bacillus. One replication determinant (designated RepA) was functional only in Bacillus subtilis, whereas the other (designated RepB) functioned in both B. subtilis and Bacillus stearothermophilus. A deletion plasmid, pTB90, carrying the RepB derived from pTB19 coincidentally contained the specific 1.0 MDal EcoRI fragment of a cryptic plasmid pBSO2 from B. stearothermophilus. The presence of this 1.0 MDal EcoRI fragment in various deletion plasmids from pTB90 increased transformation frequencies for B. stearothermophilus 10(3) to 10(4) times and lowered plasmid copy numbers in the host strain to about one-tenth of those found for plasmids lacking this fragment.     

De novo synthesis of poly(dAT) by the cell extract of a thermophile Bacillus stearothermophilus carrying a plasmid pTB913

Abstract In the absence of added template and primer, DNA synthesis activity which required dATP, dTTP, magnesium ion, and ATP was detected in the cell extracts prepared from a thermophile Bacillus stearothermophilus carrying a plasmid pTB913, but not from the strain without plasmid. Polymer synthesis was detectable only after a lag period and then proceeded at an exponential rate. The DNA synthesized in vitro was the alternating copolymer of dAMP and dTMP, poly(dAT). This reaction was very similar to the de novo DNA synthesis by DNA polymerase I of Escherichia coli, Bacillus subtilis , and Micrococcus luteus , except for the requirement of ATP and thermostability.     

Structural and functional analysis of pTB6 from Bifidobacterium longum

The complete nucleotide sequence for pTB6 (3,624 bp) from Bifidobacterium longum was determined. This plasmid is 95% homologous in nucleotide (nuc) sequence, and also 92% in RepB aa sequence, to rolling circle replication (RCR) plasmids pKJ36 and pB44, suggesting that pTB6 replicates by the rolling circle mechanism. The putative MembB, MobA, and protein encoding from orf (Orf) I detected were nonessential for plasmid replication. We constructed an immobile shuttle vector from pTB6 and pUC18, which transformed B. longum with a high efficiency of 2.5 x 10(6) transformants/microg DNA.     

Sequence of the 68,869 bp IncP-1alpha plasmid pTB11 from a waste-water treatment plant reveals a highly conserved backbone, a Tn402-like integron and other transposable elements

To analyse the significance of conjugative broad-host-range IncP-1alpha plasmids for the spread of antibiotic resistance determinants in waste-water treatment plants we isolated and characterised five different IncP-1alpha plasmids from bacteria of activated sludge and the final effluents of a municipal waste-water treatment plant. These plasmids mediate resistance to ampicillin, cefaclor, cefuroxime, gentamicin, kanamycin, spectinomycin, streptomycin, tetracycline, tobramycin, and trimethoprim. The complete 68,869 bp DNA-sequence of the IncP-1alpha plasmid pTB11 was determined. The pTB11 backbone modules for replication (Rep), mating pair formation (Trb), multimer resolution (Mrs), post-segregational killing (Psk), conjugative DNA-transfer (Tra), plasmid control (Ctl), and stable maintenance and inheritance (KilA, KilE, and KilC) are highly conserved as compared to the 'Birmingham' IncP-1alpha plasmids. In contrast to the 'Birmingham' plasmids pTB11 carries an insert of a Tn402-derivative integrating a class 1 integron in the intergenic region between the multimer resolution operon parCBA and the post-segregational killing operon parDE. The integron comprises the resistance gene cassettes oxa2 (beta-lactamase), aacA4 (aminoglycoside-6'N-acetyltransferase), and aadA1 (aminoglycoside-3'-adenylyltransferase) and a complete tniABQR transposition module. Integron-specific sequences were also identified on other IncP-1alpha plasmids analysed in this work. In contrast to the 'Birmingham' plasmids the pTB11 tetracycline resistance module carries a pecM- and a pncA-like gene downstream of the tetracycline resistance gene tetA and contains an insertion of the new insertion sequence element ISTB11. The transposable elements IS21 and Tn1 which disrupted, respectively, orf7 and klcB on the 'Birmingham' plasmids are not present on pTB11. Identification of IncP-1alpha plasmids in bacteria of the waste-water treatment plant's final effluents indicates that bacteria carrying these kind of plasmids are released into the environment.     

Plasmid pTB913 derivatives are segregationally stable in Bacillus subtilis at elevated temperatures.

We studied the effects of temperature on the segregational stability of derivatives of the rolling-circle-type plasmid pTB913 in Bacillus subtilis. This 4.5-kb plasmid is a deletion derivative of pTB19, which was originally isolated from a thermophilic Bacillus. pTB913 derivatives carrying large inserts or lacking the minus origin for complementary strand synthesis were segregationally unstable at 37 degrees C. In contrast, at 47 degrees C all pTB913 derivatives tested were stably maintained in B. subtilis. The increased stability at 47 degrees C was attributed, at least partly, to increased copy numbers at this temperature. Although considerable amounts of single-stranded and high-molecular-weight plasmid DNA were formed at 47 degrees C, these products did not reduce plasmid stability at this temperature. The increased stability and increased copy number of pTB913 at elevated temperatures extend the use of this plasmid as a cloning vector in B. subtilis and other bacilli.     

Sequence of the 68,869 bp IncP-1α plasmid pTB11 from a waste-water treatment plant reveals a highly conserved backbone, a Tn402-like integron and other transposable elements

To analyse the significance of conjugative broad-host-range IncP-1α plasmids for the spread of antibiotic resistance determinants in waste-water treatment plants we isolated and characterised five different IncP-1α plasmids from bacteria of activated sludge and the final effluents of a municipal waste-water treatment plant. These plasmids mediate resistance to ampicillin, cefaclor, cefuroxime, gentamicin, kanamycin, spectinomycin, streptomycin, tetracycline, tobramycin, and trimethoprim. The complete 68,869 bp DNA-sequence of the IncP-1α plasmid pTB11 was determined. The pTB11 backbone modules for replication (Rep), mating pair formation (Trb), multimer resolution (Mrs), post-segregational killing (Psk), conjugative DNA-transfer (Tra), plasmid control (Ctl), and stable maintenance and inheritance (KilA, KilE, and KilC) are highly conserved as compared to the ‘Birmingham’ IncP-1α plasmids. In contrast to the ‘Birmingham’ plasmids pTB11 carries an insert of a Tn402-derivative integrating a class 1 integron in the intergenic region between the multimer resolution operon parCBA and the post-segregational killing operon parDE. The integron comprises the resistance gene cassettes oxa2 (β-lactamase), aacA4 (aminoglycoside-6′N-acetyltransferase), and aadA1 (aminoglycoside-3′-adenylyltransferase) and a complete tniABQR transposition module. Integron-specific sequences were also identified on other IncP-1α plasmids analysed in this work. In contrast to the ‘Birmingham’ plasmids the pTB11 tetracycline resistance module carries a pecM- and a pncA-like gene downstream of the tetracycline resistance gene tetA and contains an insertion of the new insertion sequence element ISTB11. The transposable elements IS21 and Tn1 which disrupted, respectively, orf7 and klcB on the ‘Birmingham’ plasmids are not present on pTB11. Identification of IncP-1α plasmids in bacteria of the waste-water treatment plant’s final effluents indicates that bacteria carrying these kind of plasmids are released into the environment.     

Replacement of the Epstein-Barr virus plasmid with the EBER plasmid in Burkitt's lymphoma cells

Transfection of an Epstein-Barr virus (EBV)-encoded plasmid containing EBER caused a substantial decrease in the level of plasmid containing EBV in Akata and Mutu Burkitt's lymphoma (BL) lines, but failed to do so in other BL lines. The results suggest that EBER could replace the role of EBV, but other EBV products also play a role in the growth of BL.     

A type Ib plasmid segregation machinery of the Advenella kashmirensis plasmid pBTK445

pBTK445 is a newly described large (～60Kb), low-copy number, conjugative plasmid indigenous to the sulfur-chemolithoautotroph Advenella kashmirensis. Based on its minimal replication region, a shuttle vector, pBTKS was constructed which can be used for diverse Alcaligenaceae members. The construct was found to be stably maintained both in the native host as well as in Escherichia coli in the absence of selective pressure which indicated that pBTKS harbors the stabilizing system of pBTK445, that are commonly coded by low-copy-number plasmids. Deletion analyzes of pBTKS confirmed the essentiality of parA (encoding a Walker-type ATPase of 214 amino acids) and the downstream located small parB (encoding an 85 amino acid protein having no sequence homolog in the database) in the faithful partitioning of pBTK445. A 1075bp PCR product, containing parA, parB and an upstream sequence having nine 11bp direct repeats (parS site) was found to comprise the partition functions of pBTK445, stabilizing both low-copy or high-copy number homologous and heterologous replicons in diverse hosts. The incompatibility determinant and the par promoter, P(par) were both found to be present within a 191bp iterated sequence present upstream of parA. ParB was found to regulate the expression of the Par proteins from P(par). The presence of a typical Walker-type ATPase motif in ParA, a short phylogenetically unrelated ParB, that acts as a repressor of P(par), and location of the iterated parS site upstream of parA, confirm that the active partition system of pBTK445 belongs to the type Ib.     

Segregation of the yeast plasmid: similarities and contrasts with bacterial plasmid partitioning

The high copy yeast plasmid 2 microm circle, like the well-studied low copy bacterial plasmids, utilizes two partitioning proteins and a cis-acting 'centromere'-like sequence for its stable propagation. Functionally, though, the protein and DNA constituents of the two partitioning systems are quite distinct. Key events in the yeast and bacterial segregation pathways are plasmid organization, localization, replication, 'counting' of replicated molecules and their distribution to daughter cells. We suggest that the two systems facilitate these common logistical steps by adapting to the physical, biochemical, and mechanical contexts in which the host chromosomes segregate.     

整合载体与选择载体共转化酵母菌的研究

以酿酒酵母菌株H158为例,研究了带有rDNA的多拷贝整合载体pMIRY2与选择载体pFAKnaMX4的共转化率,得到了共转化过程中两种载体的最佳比率为3-4：1,得到的共转化子在完全培养基中连续传代培养5d即可得到去除G418抗性标记基因的转化子,转化子的稳定性达到90%以上,实验表明该系统适合于外源基因在酵母中的稳定表达。     

Mobilization function of the pBHR1 plasmid, a derivative of the broad-host-range plasmid pBBR1

The pBHR1 plasmid is a derivative of the small (2.6-kb), mobilizable broad-host-range plasmid pBBR1, which was isolated from the gram-negative bacterium Bordetella bronchiseptica (R. Antoine and C. Locht, Mol. Microbiol. 6:1785-1799, 1992). Plasmid pBBR1 consists of two functional cassettes and presents sequence similarities with the transfer origins of several plasmids and mobilizable transposons from gram-positive bacteria. We show that the Mob protein specifically recognizes a 52-bp sequence which contains, in addition to the transfer origin, the promoter of the mob gene. We demonstrate that this gene is autoregulated. The binding of the Mob protein to the 52-bp sequence could thus allow the formation of a protein-DNA complex with a double function: relaxosome formation and mob gene regulation. We show that the Mob protein is a relaxase, and we located the nic site position in vitro. After sequence alignment, the position of the nic site of pBBR1 corresponds with those of the nick sites of the Bacteroides mobilizable transposon Tn4555 and the streptococcal plasmid pMV158. The oriT of the latter is characteristic of a family of mobilizable plasmids that are found in gram-positive bacteria and that replicate by the rolling-circle mechanism. Plasmid pBBR1 thus appears to be a new member of this group, even though it resides in gram-negative bacteria and does not replicate via a rolling-circle mechanism. In addition, we identified two amino acids of the Mob protein necessary for its activity, and we discuss their involvement in the mobilization mechanism.     

Effective and robust plasmid topology analysis and the subsequent characterization of the plasmid isoforms thereby observed

Within the biopharmaceutical industry, recombinant plasmid DNA is used both as a raw material (e.g. in lentiviral and AAV vector production) as well as an active ingredient (e.g. in DNA vaccines). Consequently, many analytical laboratories are routinely involved with plasmid DNA topoisoform qualitative analysis and quantification. In order to reliably determine plasmid topology, one must ensure that the methodology employed can reliably, precisely and accurately measure qualitatively and quantitatively all topological isoforms. Presented here are an anion-exchange high-performance liquid chromatography (AEC) and an agarose gel electrophoresis (AGE)-based method developed for this purpose. The strategies undertaken to overcome the respective typical problems of limited linear range of quantitation (for AGE) and isoform resolution (for AEC) are described. Also presented is a subsequent direct comparison (for assay precision/accuracy) of these two methods, as well as a package of species characterization [by chloroquine-AGE, enzymatic digestion, multi-angle laser light-scattering (MALLS) and electron microscopy] undertaken to confirm the identity of a minor supercoiled dimeric concatamer observed by both approaches.     

Biofilms and the plasmid maintenance question

Can a conjugative plasmid encoding enhanced biofilm forming abilities for its bacterial host facilitate the persistence of the plasmid in a bacterial population despite conferring diminished growth rate and segregative plasmid loss on its bearers? We construct a mathematical model in a chemostat and in a plug flow environment to answer this question. Explicit conditions for an affirmative answer are derived. Numerical simulations support the conclusion.     

Purification and properties of the plasmid maintenance proteins from the Borrelia burgdorferi linear plasmid lp17

The Lyme disease spirochete Borrelia burgdorferi carries more plasmids than any other bacterium, many of which are linear with covalently closed hairpin ends. These plasmids have also been referred to as mini-chromosomes and essential genetic elements and are integral components of its segmented genome. We have investigated two plasmid maintenance proteins, BBD14 (the replication initiator) and BBD21 (a presumptive ParA orthologue), encoded by the linear plasmid lp17; these proteins are representatives of paralogous families 62 and 32, respectively. We have purified recombinant 6-his-BBD21 and shown it possesses an ATPase activity. 6-his-BBD14 initially could not be overexpressed in Escherichia coli by itself. It was only effectively overproduced in recombinant form through coexpression with other B. burgdorferi proteins and codon optimization. Although the mechanism for increased production through coexpression is not clear, this method holds promise for expression and purification of other B. burgdorferi proteins, a number of which have remained recalcitrant to purification from E. coli. Finally, we present evidence for the physical interaction of BBD14 and BBD21, a feature suggesting that BBD21 and the paralogous family 32 proteins are more likely involved in DNA replication than functioning as simple ParA orthologues as previously surmised based upon sequence homology. Such a role would not preclude a function in plasmid partitioning through interaction with the replication initiator.     

Analysis of the F plasmid centromere

Summary The nucleotide sequence of the cis-acting partition site (centromere) of the miniF plasmid has been determined. Its most notable feature is a reiterated 43 base pair unit. A series of plasmids deleted for portions of the repeat region was constructed and tested for incompatibility with R386 and for stability of inheritance. The extent of incompatibility with R386 was correlated with the number of repeat units. In contrast, the great majority of the repeats were not needed for miniF stability. An adjacent region of unique sequence was also found to be involved in centromere function.