A DNA polymerase mutation that suppresses the segregation bias of an ARS plasmid in Saccharomyces cerevisiae.

Yeast autonomously replicating sequence (ARS) plasmids exhibit an unusual segregation pattern during mitosis. While the nucleus divides equally into mother and daughter cells, all copies of the ARS plasmid will often remain in the mother cell. A screen was designed to isolate mutations that suppress this segregation bias. A plasmid with a weak ARS (wARS) that displayed an extremely high segregation bias was constructed. When cells were grown under selection for the wARS plasmid, the resulting colonies grew slowly and had abnormal morphology. A spontaneous recessive mutation that restored normal colony morphology was identified. This mutation suppressed plasmid segregation bias, as indicated by the increased stability of the wARS plasmid in the mutant cells even though the plasmid was present at a lower copy number. An ARS1 plasmid was also more stable in mutant cells than in wild-type cells. The wild-type allele for this mutant gene was cloned and identified as POL delta (CDC2). This gene encodes DNA polymerase delta, which is essential for DNA replication. These results indicate that DNA polymerase delta plays some role in causing the segregation bias of ARS plasmids.     

Part of the human ribosomal RNA locus stabilizes a plasmid in yeast.

Most yeast plasmids--particularly those containing chromosomal replicators (ARS)--are unstable and do not segregate equally to mother and daughter cells unless they contain centromeric sequences. We have screened a fraction of the human genome for sequences that stabilize YRp7, a plasmid containing ARS1. We selected a fraction which we hoped would be enriched in human centromeric sequences--the DNA attached to the nucleoskeleton. We obtained one human sequence that partially stabilized a yeast plasmid and, surprisingly, it contained sequences homologous to those coding for the 3' end of 18s rRNA, the transcribed spacer and 5' end of 28s rRNA. This sequence did not show any ARS activity nor did it increase the copy number of the plasmid and so probably improved partition of the plasmid between mother and daughter cells. It had no homology to yeast centromeres.     

A DNA unwinding element and an ARS consensus comprise a replication origin within a yeast chromosome.

We have defined a replication origin, ORI305, within chromosome III of Saccharomyces cerevisiae by means of mutational analysis. cis-acting elements required for origin activity in the chromosome, as assayed by two-dimensional gel electrophoresis of replication intermediates, are the same as those required for the function of an autonomously replicating sequence, ARS305, in a plasmid. Essential elements include (i) an 11 bp sequence that is a near match to the ARS consensus and (ii) a broad sequence directly 3' to the consensus near match. Origin function is inactivated by point mutations in the essential near match sequence, suggesting that the sequence contributes to specifying the origin in the chromosome. Other consensus near matches with different sequences are present but are not required. The essential 3'-flanking sequence exhibits DNA helical instability and is sensitive to deletion mutations that stabilize the DNA helix. The wild-type 3'-flanking sequence can be functionally substituted by dissimilar sequences that also exhibit helical instability. The requirement for DNA helical instability indicates that the essential 3'-flanking sequence serves as a DNA unwinding element in the chromosome.     

An ARS element from Drosophila melanogaster telomeres contains the yeast ARS core and bent replication enhancer.

We have sequenced the 0.7-kb-long fragment of Drosophila DNA which ensures the autonomous replication of plasmids in yeast. Deletion mapping has shown the ARS element to consist of at least two domains: the core having the consensus 11-bp sequence TAAATATAAAT and the enhancer which is no more than 90 bp long and is located at the 3'-end of the A-rich core strand. Neither domain per se ensures plasmid replication in yeast. A comparison of the enhancer sequence with the sequences of 14 different ARS elements failed to reveal significant homology areas. Most probably the ARS flanks that are adjacent to the core and act as enhancer do not carry any consensus. They may determine a peculiar structural feature of DNA (for example bends) which are necessary for the protein-ARS interaction.     

Genetic analysis of an ARS element from the fission yeast Schizosaccharomyces pombe.

ARS (autonomously replicating sequence) elements are DNA fragments that can function as origins of DNA replication in yeast. We report the first fine-structure analysis of ars1, an ARS element of the fission yeast Schizosaccharomyces pombe. Characterization of a series of nested deletion mutations indicated that the minimal fragment of DNA encompassing ars1 is surprisingly large. No fragment < 650 bp retained significant ARS activity. Analysis of deletion and substitution mutations scanning the entire minimal ars1 identified a single essential 50 bp fragment (segment 1). Only one other 50 bp mutation reduced activity as much as 5-fold and most deletions were without effect. Thus, the minimal ars1 is composed of two general types of genetic elements, a small segment that is absolutely required for efficient ARS activity and a much larger region that is tolerant of internal structural alterations. Higher resolution analysis of segment 1 defined a critical 30 bp A/T-rich segment which appears to contain redundant genetic elements. Schizosaccharomyces pombe ars1 promoted high frequency transformation in the budding yeast S.cerevisiae but this heterologous activity was not dependent on segment 1. Our analysis indicates that the functional elements required for ARS function in S.pombe and S.cerevisiae are clearly different.     

An autonomously replicating sequence from HeLa DNA shows a similar organization to the yeast ARS1 element

Summary A HeLa DNA fragment, which may function as an anchorage point to the nuclear matrix for human chromosomes 1 and 2, also functions as an autonomously replicating sequence (ARS) in the yeast Saccharomyces cerevisiae. In the present report we show that this DNA fragment contains both bent DNA and an A-T rich region which appear to be associated with the ARS function. More interestingly, DNA sequence analysis shows that the spatial distribution of these features is strikingly similar to that found in the yeast ARS1 element.     

A mutation of the fission yeast EB1 overcomes negative regulation by phosphorylation and stabilizes microtubules

Mal3 is a fission yeast homolog of EB1, a plus-end tracking protein (+TIP). We have generated a mutation (89R) replacing glutamine with arginine in the calponin homology (CH) domain of Mal3. Analysis of the 89R mutant in vitro has revealed that the mutation confers a higher affinity to microtubules and enhances the intrinsic activity to promote the microtubule-assembly. The mutant Mal3 is no longer a +TIP, but binds strongly the microtubule lattice. Live cell imaging has revealed that while the wild type Mal3 proteins dissociate from the tip of the growing microtubules before the onset of shrinkage, the mutant Mal3 proteins persist on microtubules and reduces a rate of shrinkage after a longer pausing period. Consequently, the mutant Mal3 proteins cause abnormal elongation of microtubules composing the spindle and aster. Mal3 is phosphorylated at a cluster of serine/threonine residues in the linker connecting the CH and EB1-like C-terminal motif domains. The phosphorylation occurs in a microtubule-dependent manner and reduces the affinity of Mal3 to microtubules. We propose that because the 89R mutation is resistant to the effect of phosphorylation, it can associate persistently with microtubules and confers a stronger stability of microtubules likely by reinforcing the cylindrical structure.     

A novel mutation in ribosomal protein S4 that affects the function of a mutated RF1

Release factors (RF) 1 and 2 trigger the hydrolysis of the peptide from the peptidyl-tRNA during translation termination. RF1 binds to the ribosome in response to the stop codons UAG and UAA, whereas RF2 recognizes UAA and UGA. RF1 and RF2 have been shown to bind to several ribosomal proteins. To study this interaction in vivo, prfA1, a mutant form of RF1 has been used. A strain with the prfA1 mutation is temperature sensitive (Ts) for growth at 42 degrees C and shows an increased misreading of UAG and UAA. In this work we show that a point mutation in ribosomal protein S4 can, on the one hand, make the RF1 mutant strain Ts(+); on the other hand, this mutation increases the misreading of UAG, but not UAA, caused by prfA1. The S4 mutant allele, rpsD101, is a missense mutation (Tyr51 to Asp), which makes the cell cold sensitive. The behaviour of rpsD101 was compared to the well-studied S4 alleles rpsD12, rpsD14, and rpsD16. These three mutations all confer both a Ts (44 degrees C) phenotype and show a ribosomal ambiguity phenotype, which rpsD101 does not. The three alleles were sequenced and shown to be truncations of the S4 protein. None of the three mutations could compensate for the Ts phenotype caused by the prfA1 mutation. Hence, rpsD101 differs in all studied characteristics from the three above mentioned S4 mutants. Because rpsD101 can compensate for the Ts phenotype caused by prfA1 but enhances the misreading of UAG and not UAA, we suggest that S4 influences the interaction of RF1 with the decoding center of the ribosome and that the Ts phenotype is not a consequence of increased readthrough.     

Identification and purification of a protein that binds the yeast ARS consensus sequence

We have identified a yeast protein that binds specifically to the ARS consensus sequence. By two-step chromatography we have purified the factor to apparent homogeneity as a single polypeptide of 67 kd. The purified ARS consensus-binding protein (ACBP) recognizes the ARS consensus of the four genomic ARS elements tested, binding preferentially to the T-rich single strand. Point mutations in the consensus significantly reduce the affinity of the single-strand binding. At the histone H4 ARS, ACBP recognizes both the perfect ARS consensus and a 9/11 match 3' of it. These two binding sites correlate with the boundaries of the minimal functional H4 ARS element. A similar configuration of binding sites is found at ARS1. We propose a model implicating this factor in an early step of the initiation of DNA replication.     

A conserved element that stabilizes the group II intron active site

The internal loop at the base of domain 3 (D3) is one of the most conserved and catalytically important elements of a group II intron. However, the location and molecular nature of its tertiary interaction partners has remained unknown. By employing a combination of site-directed photo-cross-linking and nucleotide analog interference suppression (NAIS), we show that the domain 3 internal loop (D3IL) interacts with the epsilon-epsilon' duplex, which is an active-site element located near the 5'-splice site in D1. Our data also suggest that the D3IL may interact with the bulge of D5, which is a critical active site component. The results of this and other recent studies indicate that the D3IL participates in a complex network of tertiary interactions involving epsilon-epsilon', the bulge of D5 and J23, and that it helps to optimize active site architecture by supporting interactions among these catalytic motifs. Our results are consistent with the role of D3 as a catalytic effector that enhances intron reactivity through active site stabilization.     

A palindromic mutation of the linear killer plasmid k2 of yeast.

Production of the killer toxin in Kluyveromyces lactis is dependent on the presence of two linear DNA plasmids, k1 and k2. We isolated a non-killer mutant, VM5, with a modified plasmid composition. It had lost k1, but conserved k2, and acquired, in addition, three new DNA species. The new species were found to be rearranged derivatives of the k2 plasmid. One of them, pVM5-1, was made of the left terminal 4720 bp sequence of k2, including the inverted terminal repeat, and was organized as a large palindromic dimer molecule. The second, pVM5-2, was made of one strand of the pVM5-1 palindrome, folded into a hairpin structure. Like normal k2, pVM5-1 and 2 were present in a high copy number. The third species, pVM5-x, of variable size, was also a deletion product of k2, but not palindromic, and did not contain the terminal repeat. Genetic analysis showed that the presence of the palindromic derivatives appeared to destabilize the normal k2 genome, leading to gradual accumulation of plasmid-less cells.     

Single-stranded-DNA-binding protein-dependent DNA unwinding of the yeast ARS1 region.

DNA unwinding of autonomously replicating sequence 1 (ARS1) from the yeast Saccharomyces cerevisiae was investigated. When a negatively supercoiled plasmid DNA containing ARS1 was digested with single-strand-specific mung bean nuclease, a discrete region in the vector DNA was preferentially digested. The regions containing the core consensus A domain and the 3'-flanking B domain of ARS1 were weakly digested. When the DNA was incubated with the multisubunit single-stranded DNA-binding protein (SSB, also called RPA [replication protein A]) from human and yeast cells prior to mung bean nuclease digestion, the cleavage in the A and B domains was greatly increased. Furthermore, a region corresponding to the 5'-flanking C domain of ARS1 was digested. These results indicate that three domains of ARS1, each of which is important for replication in yeast cells, closely correspond to the regions where the DNA duplex is easily unwound by torsional stress. SSB may stimulate the unwinding of the ARS1 region by its preferential binding to the destabilized three domains. Mung bean nuclease digestion of the substitution mutants with mutations of ARS1 (Y. Marahrens and B. Stillman, Science 255:817-823, 1992) revealed that the sequences in the B2 and A elements are responsible for the unwinding of the B domain and the region containing the A domain, respectively.     

Structure of the chromosomal copy of yeast ARS1

We have used deoxyribonuclease I (DNase I) and methidium-propyl-EDTA.Fe(II) digestion to characterize the chromosomal structure of the single-copy autonomously replicating sequence ARS1. The major feature of this chromatin is a region of strong hypersensitivity to both cleavage agents. The hypersensitive region contains most of the DNA sequences which have been suggested by in vitro mutagenesis studies [Celniker, S., Sweder, K., Srienc, F., Bailey, J., & Campbell, J. (1984) Mol. Cell. Biol. 4, 2455-2466] to be important in ARS function. It lies at the downstream end of the TRP1 gene. A chromosomal DNase I footprinting analysis was carried out on the hypersensitive region. These data give direct evidence for several localized DNA/protein contacts within the hypersensitive region. The most prominent of these chromatin-dependent contacts is located on the functionally most important 11 base pairs of ARS DNA. On the TRP1 side of the hypersensitive region, there are positioned nucleosomes. On the other side of the hypersensitive region, there is a complex (and possibly heterogeneous) structure.     

Intra-allelic suppression of a mutation that stabilizes microtubules and confers resistance to colcemid

Cmd 4 is a colcemid resistant beta-tubulin mutant of Chinese hamster ovary cells that exhibits hypersensitivity to paclitaxel and temperature sensitivity for growth. The mutant beta-tubulin allele in this cell line encodes a D45Y amino acid substitution that produces colcemid resistance by making microtubules more stable. By selecting revertants of the temperature sensitive and paclitaxel hypersensitive phenotypes, we have identified three cis-acting suppressors of D45Y. One suppressor, V60A, maps to the same region as the D45Y alteration, and a second suppressor, Q292H, maps to a distant location. Both appear to produce compensatory changes in microtubule assembly that counteract the effects of the original D45Y substitution. Consistent with this view, expression of the V60A mutation in transfected wild-type cells produced paclitaxel resistance and greatly decreased microtubule assembly. Additionally, it produced a paclitaxel-dependent phenotype in which cells grew normally in the presence, but not the absence, of the drug. The Q292H mutation caused even greater disassembly of microtubules such that cells were unable to proliferate when the transgene was expressed; but, unlike the V60A mutation, cell growth could not be rescued by paclitaxel. A third suppressor, A254V, maps to a region near the interface between alpha- and beta-tubulin that contains the colchicine binding site. Although it made transfected wild-type cells hypersensitive to colcemid, it did not affect paclitaxel or vinblastine sensitivity, nor did it reduce microtubule assembly. We suggest that this mutation acts by increasing tubulin's affinity for colcemid.     

Sequence analysis of ARS elements in fission yeast.

Chromosomal DNA of Schizosaccharomyces pombe contains sequences with properties analogous to ARS elements of Saccharomyces cerevisiae. Following Sau3A fragmentation of the S. pombe genome we have recovered a number of such fragments in an M13-based shuttle vector, suitable for subsequent sequence analysis. The complete nucleotide sequence has been obtained for eight ARS+ inserts derived from the Sau3A cloning and for the ARS present in pFL20 isolated previously by Losson and Lacroute (Cell, 32, 371-377, 1983). The Sau3A clones are single fragments between 0.8 and 1.8 kb. No ARS+ clones smaller than this were recovered even though the average size Sau3A fragment in S. pombe is approximately 200-300 bp. The sequence analysis revealed that all clones are AT-rich (69-75% A + T residues), and all contain a particularly AT-rich 11 bp core element represented by the consensus sequence 5' (A/T)PuTT-TATTTA(A/T) 3'. Deletion mapping indicates that the consensus in all cases is in the vicinity of a functional ARS domain. However precise excision of the consensus by in vitro mutagenesis has little effect on ARS activity as judged by the transformation assay. We argue that the association of the consensus with the ARS domain occurs too reproducibly to be explained by chance alone. We suggest that although it may not be essential for the extrachromosomal maintenance of plasmids in S. pombe, the consensus does have a function in situ in the chromosome and thus is always present as a cryptic sequence in the isolated ARS element.     

Mutagenesis on cloned yeast genes. The mutation of the yeast gene comprising the plasmid and chromosome

The cells of Saccharomyces cerevisiae were transformed by plasmid pYG-007 treated in vitro with o-methylhydroxylamine. The plasmid consists of a portion of the bacterial plasmid with genes of resistance to ampicillin, chloramphenicol and tetracycline, 2 mkm yeast DNA and yeast genes ADE2 and LEU2. The collection of mutants containing a mutant allele of ADE2 gene within the plasmid was obtained. Interallelic complementation and that induced by suppression were studied in these ade 2 mutants. It was shown that all these induced ade 2 mutations were base-pair substitutions. Using the mechanism of conversion we managed to transfer the plasmid ade 2 mutations into the chromosome. Three pairs of strains carrying similar mutation in plasmid and chromosome were created. Analysis of frequency of reversions induced by UV-light and hydroxylaminopurine in the mutant ade2 locus comprised in the plasmid and chromosome showed that the former induced reversions in plasmid alleles less effectively than the latter.     

Close association of a DNA replication origin and an ARS element on chromosome III of the yeast, Saccharomyces cerevisiae.

Two dimensional gel electrophoretic techniques were used to locate all functional DNA replication origins in a 22.5 kb stretch of yeast chromosome III. Only one origin was detected, and that origin is located within several hundred bp of an ARS element.     

Drosophila ARSs contain the yeast ARS consensus sequence and a replication enhancer.

A number of restriction fragments that function as autonomously replicating sequences (ARSs) in yeast have been isolated from Drosophila melanogaster DNA. The behaviour in yeast of plasmids containing Drosophila ARS elements was studied and compared to that exhibited by the archetypal yeast ARS-1 plasmid. ARS functions were localised by subcloning and BAL-31 deletion analysis. These studies demonstrated the structural and functional complexity of Drosophila ARSs. Each Drosophila ARS element has at least two domains, one essential for replication (the replication sequence, RS) and a second (the replication enhancer, RE) which is essential for maximum function of the RS. The RS of three Drosophila ARSs was shown to contain a sequence identical to an 11 bp yeast ARS consensus sequence (5' A/T TTTATPuTTT A/T 3'). These observations lend support to the hypothesis that heterologous ARS elements may be of biological significance.     

Identification of an apolipoprotein A-I structural element that mediates cellular cholesterol efflux and stabilizes ATP binding cassette transporter A1

Synthetic peptides were used in this study to identify a structural element of apolipoprotein (apo) A-I that stimulates cellular cholesterol efflux and stabilizes the ATP binding cassette transporter A1 (ABCA1). Peptides (22-mers) based on helices 1 (amino acids 44-65) and 10 (amino acids 220-241) of apoA-I had high lipid binding affinity but failed to mediate ABCA1-dependent cholesterol efflux, and they lacked the ability to stabilize ABCA1. The addition of helix 9 (amino acids 209-219) to either helix 1 (creates a 1/9 chimera) or 10 (9/10 peptide) endowed cholesterol efflux capability and ABCA1 stabilization activity similar to full-length apoA-I. Adding helix 9 to helix 1 or 10 had only a small effect on lipid binding affinity compared with the 22-mer peptides, indicating that helix length and/or determinants on the polar surface of the amphipathic alpha-helices is important for cholesterol efflux. Cholesterol efflux was specific for the structure created by the 1/9 and 9/10 helical combinations, as 33-mers composed of helices 1 and 3 (1/3), 2/9, and 4/9 failed to mediate cholesterol efflux in an ABCA1-dependent manner. Transposing helices 9 and 10 (10/9 peptide) did not change the class Y structure, hydrophobicity, or amphiphilicity of the helical combination, but the topography of negatively charged amino acids on the polar surface was altered, and the 10/9 peptide neither mediated ABCA1-dependent cholesterol efflux nor stabilized ABCA1 protein. These results suggest that a specific structural element possessing a linear array of acidic residues spanning two apoA-I amphipathic alpha-helices is required to mediate cholesterol efflux and stabilize ABCA1.