Study on the interaction of bovine serum albumin with acid cyanine 5R and its application in analysis.

A supramolecular complex of bovine serum albumin (BSA) with acid cyanine 5R (AC 5R, C.I. acid blue 113, C.I.: 26360) has been shown to form in Tris-HCl buffer solution (pH 7.42) by linear sweep voltammetry (LSV), fluorimetry, and spectrophotometry. The binding ratio and binding constant of BSA with AC 5R have been detected by LSV and fluorimetry. The binding mechanism is also preliminarily discussed. In Tris-HCl buffer solution (pH 7.42), AC 5R can easily be reduced on the mercury electrode, and it has a well-defined LSV peak current (Ip) and peak potential (Ep) at -0.65 V (vs. SCE). In the presence of BSA, the Ip of AC 5R decreases, and the peak potential (Ep) shifts to a more positive potential. The decrease of the second-order derivative of reductive peak current (deltaIp') of AC 5R is proportional to the logarithm of BSA concentration in the range of 1.54 x 10(-8) mol x L(-1)-1.54 x 10(-5) mol x L(-1) (r = 0.9931-0.9977). The limit of detection of BSA is 9.0 x 10(-9) mol x L(-1). The relative standard deviation is 1.83% (n = 10), and the standard recovery is 97.5%-104.8%. This method can be used to determine BSA concentration on the basis of the interaction of BSA with AC 5R.     

Immobilized antibody-based flow type enzyme immunosensor for determination of human serum albumin

A flow-type enzyme immunosensor was prepared for the electrochemical determination of human serum albumin (HSA). The immunosensor was constructed from the immobilized antibody (anti-HSA IgG) reactor and an oxygen electrode. The immunochemical reaction of catalase-labelled antibody with HSA was completed with 30 min. After the immunochemical reaction, hydrogen peroxide solution was injected into the system and a peak current was obtained within 2 min. A linear relationship was observed between the current increase and the logarithm of HSA concentration in the range 10⁻⁸-10⁻⁶ g ml⁻¹. The minimum measurable concentration was 10⁻⁸ g ml⁻¹. The current increase was reproducible with 10% of the relative errors when a sample solution containing 10⁻⁷ g ml⁻¹ of HSA was used. The minimum measurable concentration increased to 10⁻⁹ g ml⁻¹ when hydrogen peroxide was recycled for 5 min in the reactor system. The immobilized antibody reactor could be reused. HSA in human serum was determined by the system proposed.     

Aptamer-based electrochemical biosensor by using Au-Pt nanoparticles,carbon nanotubes and acriflavine platform

Herein, an ultrasensitive electrochemical aptasensor for quantitative detection of bisphenol A (BPA) was fabricated based on a novel signal amplification strategy. This aptasensor was developed by electrodeposition of gold-platinum nanoparticles (Au-PtNPs) on glassy carbon (GC) electrode modified with acid-oxidized carbon nanotubes (CNTs-COOH). In this protocol, acriflavine (ACF) was covalently immobilized at the surface of glassy carbon electrode modified with Au-PtNPs/CNTs-COOH nanocomposite. Attachment of BPA-aptamer at the surface of modified electrode was performed through the formation of phosphoramidate bonds between the amino group of ACF and phosphate group of the aptamer at 5′end. By interaction of BPA with the aptamer, the conformational of aptamer was changed which lead to retarding the interfacial electron transfer of ACF as a probe. Sensitive quantitative detection of BPA was carried out by monitoring the decrease of differential pulse voltammetric (DPV) responses of ACF peak current with increasing the BPA concentration. The resultant aptasensor exhibited good specificity, stability and reproducibility, indicating that the present strategy was promising for broad potential application.     

Electrochemical DNA biosensor for the study of ciprofloxacin-DNA interaction

The interaction of ciprofloxacin with DNA was studied by using an electrochemical DNA biosensor. The binding mechanism of ciprofloxacin was elucidated by using constant current potentiometry and differential pulse voltammetry at DNA-modified glassy carbon electrode. The decrease in the guanine oxidation peak area or peak current at +0.9 V was used as an indicator for the interaction mechanism in 0.2M acetate buffer (pH 5). The binding constant (K) values obtained were 1.33+/-0.02 x 10(4) and 1.32+/-0.08 x 10(4) M(-1) with constant current potentiometry and differential pulse voltammetry, respectively. A linear dependence of the guanine peak area or peak currents was observed in the range of 40-80 microM ciprofloxacin, with a detection limit of 24 microM with r=0.995 and 9 microM with r=0.999 by using constant current potentiometry and differential pulse voltammetry, respectively. Moreover, the influence of sodium and calcium ions was also studied to elucidate the mechanism of ciprofloxacin-DNA interaction at different solution conditions, and this proved to be helpful in understanding the ciprofloxacin-DNA interaction.     

Electrochemical studies of DNA immobilization onto the azide-terminated monolayers and its interaction with taxol

A surface modification procedure for the creation of self-assembled monolayers (SAMs) that can be used as a scaffold for double-stranded DNA (dsDNA) incorporation onto the gold surfaces is described. The SAMs of an azidohexane thiol derivative were prepared on the Au electrode and then used for the immobilization of dsDNA. The electrochemical characteristics of dsDNA onto the SAM-modified gold electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy, and the surface concentration of dsDNA onto the SAMs surface was estimated. The interaction of dsDNA with the anticancer drug, taxol (paclitaxel), was also studied on the surface of DNA/SAM/Au electrode. The observed decrease in the guanine oxidation peak current was used to monitor the interaction of taxol with DNA. The resulting Langmuir isotherm for taxol binding to DNA at the modified electrode was used to evaluate the binding constant of taxol-DNA. The results obtained supported the groove binding interaction of taxol with DNA. The modified electrode was used as a sensitive sensor for quantification of taxol in human serum sample.     

Spectrometric and voltammetric investigation of interaction of neutral red with calf thymus DNA: pH effect

The interaction of neutral red (NR) with calf thymus DNA (CT DNA) was investigated by spectrometric (UV-vis, circular dichroism and fluorescence) and voltammetric techniques. It was shown that the interaction of NR with DNA depended on the values of R (R is defined as the ratio of the concentration of NR to that of CT DNA) and pH of the solution. NR intercalated into CT DNA base pairs at lower R value (R < 2.4) and following by NR aggregating along the helical surface of DNA at higher R value (R > 2.4) in pH 6.0 solution. Interestingly, we found that at lower R value, NR intercalated into CT DNA with its long axis perpendicular or parallel to the dyad axis of DNA in the solution of pH 6.0. While in pH 7.0 solution, NR bound with CT DNA through intercalation and electrostatic interactions. The electrochemical inactive complexes, NR-2CT DNA, 3NR-CT DNA, and NR-CT DNA were formed when NR interacted with nucleic acids in pH 6.0 and 7.2 solutions, respectively. The corresponding intrinsic binding constants for these complexes were obtained by UV-vis and fluorescence spectrometric methods, respectively. The CD spectra showed that the conformation of CT DNA was converted from right-handed B-DNA to left-handed Z-DNA due to the aggregating of NR along the surface of DNA in pH 6.0 solution, whereas a conversion from B-DNA to C-DNA was induced due to the interaction of DNA with NR in pH 7.2 solution. Finally, two binding modes of NR with CT DNA in aqueous with different values of pH were shown in the scheme.     

Electrochemistry of dioxygen activation in the presence of adenine

The electrochemical behavior of dioxygen in the presence of adenine in dimethylformamide solution on the Hg electrode is studied. Evidence for the activation of O₂ is given by the shift of 150 mV towards more positive values of the one-electron reduction, accompanied by the autooxidation of adenine, while the adsorption of O₂ is shown by the characteristics of a polarographic pre-wave and voltammetric peak. The activation of O₂ is attributed to the interaction with adenine co-adsorbed on the Hg electrode.     

Simultaneous voltammetric determination of norepinephrine, ascorbic acid and uric acid on polycalconcarboxylic acid modified glassy carbon electrode

A novel polycalconcarboxylic acid (CCA) modified glassy carbon electrode (GCE) was fabricated by electropolymerization and then successfully used to simultaneously determine ascorbic acid (AA), norepinephrine (NE) and uric acid (UA). The characterization of electrochemically synthesized Poly-CCA film was investigated by atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and voltammetric methods. It was found that the electrochemical behavior of the polymer-modified electrode depended on film thickness, i.e., the electropylmyerization time. Based on the electrochemical data, the charge transfer coefficient (alpha) and the surface coverage (Gamma) were calculated. This poly-CCA modified GCE could reduce the overpotential of ascorbic acid (AA), norepinephrine (NE) and uric acid (UA) oxidation in phosphate buffer solution (pH 6.0), while it increases the peak current significantly. The current peak separations of AA/NE, NE/UA and AA/UA on this modified electrode are 91mV, 256mV and 390mV in CV at 100mVs(-1), respectively. Therefore, the voltammetric responses of these three compounds can be well resolved on the polymer-modified electrode, and simultaneously determination of these three compounds can be achieved. In addition, this modified electrode can be successfully applied to determine AA and NE in injection and UA in urine samples without interferences.     

Studies on sildenafil citrate (Viagra) interaction with DNA using electrochemical DNA biosensor

The interaction of sildenafil citrate (Viagra) with DNA was studied by using an electrochemical DNA biosensor. The binding mechanism of sildenafil citrate was elucidated by using constant current potentiometry and differential pulse voltammetry at DNA-modified glassy carbon electrode. The decrease in the guanine oxidation peak area or peak current was used as an indicator for the interaction in 0.2M acetate buffer (pH 5). The binding constant (K) values obtained were 2.01+/-0.05 x 10(5) and 1.97+/-0.01 x 10(5)M(-1) with constant current potentiometry and differential pulse voltammetry, respectively. A linear dependence of the guanine peak area or peak current was observed within the range of 1-40 microM sildenafil citrate with slope=-2.74 x 10(-4)s/microM, r=0.989 and slope=-2.78 x 10(-3)microA/microM, r=0.995 by using constant current potentiometry and differential pulse voltammetry, respectively. Additionally, binding constant values for sildenafil citrate-DNA interaction were determined for the pH range of 4-8 and in biological fluids (serum and urine) at pH 5. The influence of sodium and calcium ions was also studied to elucidate the mechanism of sildenafil citrate-DNA interaction under different solution conditions. The present study may prove to be helpful in extending our understanding of the anticancer activity of sildenafil citrate from cellular to DNA level.     

Selective recognition of d-tryptophan from d/l-tryptophan mixtures in the presence of Cu(II) by electropolymerized l-lysine film

Selective recognition of d-tryptophan (d-Trp) in the presence of Cu(II) was investigated at poly-l-lysine (p-l-Lys) film using electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). p-l-Lys film was immobilized on a glassy carbon electrode (GCE) by cyclic voltammetry between 0.0 and 1.9 V in 20 mM phosphate buffer solution (pH 8.6). After the p-l-Lys/GCE electrode was incubated with d-Trp solution containing Cu(II) ions, obvious enhancement of electron transfer resistance and decrease of voltammetric current could be observed. If d-Trp was replaced by l-tryptophan (l-Trp), there was no apparent resistance and current changes. Moreover, no resistance and current changes could be found in the absence of Cu(II). It may be due to the formation of Cu complex with l-lysine and d-tryptophan. Finally, this method was successfully applied to monitoring enantiomeric composition of the d-Trp and l-Trp mixtures.     

Electrochemical performance of 8-hydroxy-2'-deoxyguanosine and its detection at poly(3-methylthiophene) modified glassy carbon electrode

8-Hydroxy-2'-deoxyguanosine (8-OH-dG) has attracted enormous attention in recent years because it has been acknowledged as a typical biomarker of oxidative DNA damage. In this paper, the electrochemical performance of 8-OH-dG at the poly(3-methylthiophene) (P3MT) modified glassy carbon electrode (GCE) was investigated by cyclic voltammetry (CV) and linear sweep voltammetry (LSV). The conducting polymer P3MT can effectively decrease the oxidation peak potential of 8-OH-dG and greatly enhance its peak current. In 0.1 M pH 7.0 phosphate buffer solution (PBS), the anodic peak currents of cyclic voltammograms are linear with the 8-OH-dG concentration in two intervals, viz. 0.700-35.0 microM and 35.0-70.0 microM, with the correlative coefficients of 0.9992 and 0.9995, respectively. The detection limit of 8-OH-dG can be estimated to be 0.100 microM (S/N=3). This modified electrode can be used to detect the amount of 8-OH-dG in human urine. Furthermore, the effects of scan rate, pH, and interference of uric acid (UA) for the voltammetric behavior and detection of 8-OH-dG are also discussed. This proposed modified electrode also shows excellent reproducibility and stability that makes it an ideal candidate for amperometric detection of 8-OH-dG in flow injection analysis (FIA) and high performance liquid chromatography (HPLC).     

Electrochemical immunosensor of platelet-derived growth factor with aptamer-primed polymerase amplification

A new method for the determination of platelet-derived growth factor BB (PDGF-BB) was developed using an electrochemical immunosensor with an aptamer-primed, long-strand circular detection probe. Rabbit anti-human PDGF-B polyclonal antibody was immobilized on the electrode to serve as the capture antibody. The detection probe was synthesized via polymerase extension along a single-stranded circular plasmid DNA template with a primer headed by the anti-PDGF-B aptamer. In the presence of the analyte, the aptamer-primed circular probe was captured on the electrode via the formation of an antibody/PDGF-BB/aptamer sandwiched complex. The electroactivity indicator methylene blue was adsorbed on the electrode surface via the analyte-sandwiched complex with long-strand circular DNA, thus yielding a strong electrochemical signal for the quantification of PDGF-BB. This strategy allowed electrochemical detection with enormous signal amplification arising from the long-strand localized circular probe. The oxidation peak current of methylene blue in square wave voltammetric measurements showed a linear dependence on the concentration of PDGF-BB in the range from 50 to 500 ng mL⁻¹, with a detection limit as low as18 pg mL⁻¹.     

Electrochemical sensing of the behaviour of oligonucleotide lipoplexes at charged interfaces

Complexes between short oligodeoxynucleotides (ODN) with a variable dG(x)dC(y) base composition and liposomes composed of the cationic lipid DOTAP (ODN lipoplexes) were studied by differential pulse voltammetry at a glassy carbon electrode. Since lipoplexes are spontaneously formed by electrostatic interactions, the objective of the voltammetric study was to investigate their behaviour at the electrode surface/solution interface. It was verified that the peak current in the voltammograms for ODN lipoplexes was due to guanosine oxidation and that it was influenced both by the applied adsorption potential and the lipoplex (+/-) charge ratio used. It was found that for low ODN lipoplexes (+/-) charge ratios the peak current obtained was enhanced when compared to that registered with free ODN for the same concentration. This allowed a higher sensitivity in the determination of ODN by differential pulse voltammetry and a limit of detection of 5.5 ng/mL was achieved. A model that explains the organisation of ODN lipoplexes at the electrode surface/solution interface is proposed. The electrochemical results presented account for a better physicochemical characterisation of lipoplexes at charged interfaces, which can be important for the understanding and development of gene therapy vectors based on ODN lipoplexes.     

Probing the mechanism of interaction of metoprolol succinate with human serum albumin by spectroscopic and molecular docking analysis

In the present work, the mechanism of the interaction between a β1 receptor blocker, metoprolol succinate (MS) and human serum albumin (HSA) under physiological conditions was investigated by spectroscopic techniques, namely fluorescence, Fourier transform infra‐red spectroscopy (FT‐IR), fluorescence lifetime decay and circular dichroism (CD) as well as molecular docking and cyclic voltammetric methods. The fluorescence and lifetime decay results indicated that MS quenched the intrinsic intensity of HSA through a static quenching mechanism. The Stern–Volmer quenching constants and binding constants for the MS–HSA system at 293, 298 and 303 K were obtained from the Stern–Volmer plot. Thermodynamic parameters for the interaction of MS with HSA were evaluated; negative values of entropy change (ΔG°) indicated the spontaneity of the MS and HSA interaction. Thermodynamic parameters such as negative ΔH° and positive ΔS° values revealed that hydrogen bonding and hydrophobic forces played a major role in MS–HSA interaction and stabilized the complex. The binding site for MS in HSA was identified by competitive site probe experiments and molecular docking studies. These results indicated that MS was bound to HSA at Sudlow's site I. The efficiency of energy transfer and the distance between the donor (HSA) and acceptor (MS) was calculated based on the theory of Fosters' resonance energy transfer (FRET). Three‐dimensional fluorescence spectra and CD results revealed that the binding of MS to HSA resulted in an obvious change in the conformation of HSA. Cyclic voltammograms of the MS–HSA system also confirmed the interaction between MS and HSA. Furthermore, the effects of metal ions on the binding of MS to HSA were also studied.     

Design and characterization of electrochemical dopamine–aptamer as convenient and integrated sensing platform

Here, an ultrasensitive label-free electrochemical aptasensor was developed for dopamine (DA) detection. Construction of the aptasensor was carried out by electrodeposition of gold–platinum nanoparticles (Au–PtNPs) on glassy carbon (GC) electrode modified with acid-oxidized carbon nanotubes (CNTs–COOH). A designed complementary amine-capped capture probe (ssDNA1) was immobilized at the surface of PtNPs/CNTs–COOH/GC electrode through the covalent amide bonds formed by the carboxyl groups on the nanotubes and the amino groups on the oligonucleotides. DA-specific aptamer was attached onto the electrode surface through hybridization with the ssDNA1. Methylene blue (MB) was used as an electrochemical indicator that was intercalated into the aptamer through the specific interaction with its guanine bases. In the presence of DA, the interaction between aptamer and DA displaced the MB from the electrode surface, rendering a lowered electrochemical signal attributed to a decreased amount of adsorbed MB. This phenomenon can be applied for DA detection. The peak current of probe (MB) linearly decreased over a DA concentration range of 1–30 nM with a detection limit of 0.22 nM.     

Electrochemical behavior of neomycin at DNA-modified gold electrodes

Deoxyribonucleic acid (DNA) modified gold electrodes are prepared by the dry adsorptive method and the electrochemical behavior of neomycin and the influence of Pb(II) are studied by cyclic voltammetry, chronocoulometry, differential pulse voltammetry. It is found that in 0.01 M phosphate-buffered saline (PBS) buffer solutions (pH 7.3) at DNA/Au electrode neomycin exhibits an irreversible cathodic peak (E_p = 0.489 V), which is more positive and less sensitive compared with that at bare gold electrodes (E_p = 0.423 V). In the presence of Pb(II) the peak shifts toward positive with its height increasing. Moreover, the peak height is linear to neomycin concentration over the range of 0.15-57 μM. The interaction of Pb(II)-neomycin complex with calf thymus DNA is also studied by calculating the binding constants (K) of the Pb(II)-neomycin complex to DNA and binding site size (s) from voltammetric data (1.0 × 10⁷ M⁻¹ and 4 bp, respectively).     

Colloidal gold as an electrochemical label of streptavidin-biotin interaction

A new electrochemical method to monitor biotin-streptavidin interaction, based on the use of colloidal gold as an electrochemical label, is investigated. Biotinylated albumin is adsorbed on the pretreated surface of a carbon paste electrode (CPE). This modified electrode is immersed in colloidal gold-streptavidin labelled solutions. Adsorptive voltammetry is used to monitor colloidal gold bound to streptavidin, obtaining a good reproducibility of the analytical signal (R.S.D. = 3.3%). A linear relationship between peak current and streptavidin concentration from 2.5 x 10(-9) to 2.5 x 10(-5) M is obtained when a sequential competitive assay between streptavidin and colloidal gold-labelled streptavidin is carried out. On the other hand, the adsorption of streptavidin on the electrode surface was performed, followed by the reaction with biotinylated albumin labelled with colloidal gold. In this way, a linear relationship between peak current and colloidal gold labelled biotinylated albumin concentration is achieved with a limit of detection of 7.3 x 10(9) gold particles per ml (5.29 x 10(-9) M in biotin).     

Spectroelectrochemical characterization of pain biomarkers

This article reports the first electrochemical characterization of pain biomarkers that include arachidonic acid (AA), prostaglandin G₂ (PGG₂), and cyclooxygenase 2 (COX-2). These biomarkers are mediators of pathophysiology of pain, inflammation, and cell proliferation in cancer. The article also reports the development of an electrochemical immunosensor for monitoring these pain biomarkers. The results revealed that direct electron transfer between AA metabolites and the electrode could be easily monitored and that an enzyme-modified electrode dramatically enhanced bioelectrocatalytic activity toward AA. Cyclic voltammetric analysis of AA revealed a concentration-dependent anodic current with a slope of 2.37 and a limit of detection (LOD) of 0.25 nM. This unique AA/gold electrode electron transfer provides a good electrochemical sensing platform for prostaglandin H₂ (PGH₂) as the basis for quantitation of pain. An amperometric signal intensity of a COX-2 antibody-modified gold electrode was linear with COX-2 concentration in the range of 0.1-0.5 μg/ml and an LOD of 0.095 μg/ml. The results also revealed a linear correlation of the concentration of PGG₂ with an LOD of 0.227 μM.     

Electrochemical studies of kanamycin immobilization on self-assembled monolayer and interaction with DNA

The electrochemical characteristics of kanamycin onto self-assembled monolayer (SAM) modified gold electrode (SAM/Au) is investigated by cyclic voltammetry. In the potential range 0-0.6 V, Cu(II) yields a pair of stable redox waves at the bare gold electrode. E(pa) is located at 0.189 V and E(pc) at 0.254 V. In contrast, Cu(II) is reduced at a more positive potential and a decreasing current at the kanamycin SAM/Au electrode. Cu(II) and kanamycin can form a stoichiometry complex with chemical ratio of 2:1. The interaction of Cu(II)-kanamycin complex with calf thymus DNA is also studied in the solution. And the interactive mode between Cu(II)-kanamycin complex and DNA is verified by the fluorescence method. Binding constants (K) of the Cu(II)-kanamycin complex to DNA and binding site size (s) are calculated from voltammetric data and equal to 1.5 x 10(7) l/mol and 4 bp, respectively.     

Studies on the interaction mechanism between hexakis(imidazole) manganese(II) terephthalate and DNA and preparation of DNA electrochemical sensor

The interaction between hexakis(imidazole) manganese(II) terephthalate ([Mn(Im)(6)](teph).4H(2)O) and salmon sperm DNA in 0.2M pH 2.30 Britton-Robinson buffer solution was studied by fluorescence spectroscopy and cyclic voltammetry. Increasing fluorescence was observed for [Mn(Im)(6)](2+) with DNA addition, while quenching fluorescence phenomenon appeared for EB-DNA system when [Mn(Im)(6)](2+) was added. There were a couple quasi-reversible redox peaks of [Mn(Im)(6)](2+) from the cyclic voltammogram on the glassy carbon electrode. The peak current of [Mn(Im)(6)](2+) decreased with positive shift of the formal potential in the presence of DNA compared with that in the absence of DNA. All the experimental results indicate that [Mn(Im)(6)](2+) can bind to DNA mainly by intercalative binding mode. The binding ratio of the DNA-[Mn(Im)(6)](2+) association complex is calculated to be 1:1 and the binding constant is 4.44x10(3) M(-1). By using [Mn(Im)(6)](teph).4H(2)O as the electrochemical hybridization indicator, the DNA electrochemical sensor was prepared by covalent interaction and the selectivity of ssDNA modified electrode were described. The results demonstrate the use of electrochemical DNA biosensor in the determination of complementary ssDNA.