A study on the flow stability of regenerated silk fibroin aqueous solution

The flow stability of silk fibroin (SF) aqueous solutions with different concentrations under different temperatures was investigated. It was found that the flow stability decreased quickly with the increase of solution concentration and temperature. X-ray diffraction, Fourier transform infrared (FTIR) and Raman spectroscopy analysis showed that silk fibroin in aqueous solution was mainly in random coil and alpha-helix conformation. However, it turned into alpha-helix and beta-sheet conformation after gelation, and both silk I and silk II crystalline structures appeared accordingly. The investigation implies that the original dilute regenerated SF aqueous solution should be stored under low temperature and concentrated just before spinning.     

Biodegradable materials based on silk fibroin and keratin

Wool and silk were dissolved and used for the preparation of blended films. Two systems are proposed: (1) blend films of silk fibroin and keratin aqueous solutions and (2) silk fibroin and keratin dissolved in formic acid. The FTIR spectra of pure films cast from aqueous solutions indicated that the keratin secondary structure mainly consists of alpha-helix and random coil conformations. The IR spectrum of pure SF is characteristic of films with prevalently amorphous structure (random coil conformation). Pure keratin film cast from formic acid shows an increase in the amount of beta-sheet and disordered keratin structures. The FTIR pattern of SF dissolved in formic acid is characteristic of films with prevalently beta-sheet conformations with beta-sheet crystallites embedded in an amorphous matrix. The thermal behavior of the blends confirmed the FTIR results. DSC curve of pure SF is typical of amorphous SF and the curve of pure keratin show the characteristic melting peak of alpha-helices for the aqueous system. These patterns are no longer observed in the films cast from formic acid due to the ability of formic acid to induce crystallization of SF and to increase the amount of beta-sheet structures on keratin. The nonlinear trend of the different parameters obtained from FTIR analysis and DSC curves of both SF/keratin systems indicate that when proteins are mixed they do not follow additives rules but are able to establish intermolecular interactions. Degradable polymeric biomaterials are preferred candidates for medical applications. It was investigated the degradation behavior of both SF/keratin systems by in vitro enzymatic incubation with trypsin. The SF/keratin films cast from water underwent a slower biological degradation than the films cast from formic acid. The weight loss obtained is a function of the amount of keratin in the blend. This study encourages the further investigation of the type of matrices presented here to be applied whether in scaffolds for tissue engineering or as controlled release drug delivery vehicles.     

The effect of residual silk sericin on the structure and mechanical property of regenerated silk filament

In this study, we elucidated the effect of residual silk sericin (SS) on structure and mechanical properties of regenerated silk filament as well as on fiber formation. The dope viscosity markedly increased with increasing residual SS content in dope solution which was prepared by dissolving the silk protein in formic acid. As a result of FTIR, (13)C NMR, and XRD, a small amount of SS (9.6%) contained in the filament showed highest content of beta-sheet conformation and maximum crystallinity. It seems that the SS affects the structural change of SF up to a certain level by inducing the beta-transition easily. The tenacity of the filaments, containing 9.6-18.9% SS, was in the range of 2.1-2.4 gf/d, which was about 50% higher than the filament without SS (pure SF). Consequently, with the enhancement of spinnability in wet spinning process, the SS can play an important role for developing the crystalline structure of SF as well as for improving mechanical properties of the regenerated silk fiber.     

Morphology and structure of electrospun mats from regenerated silk fibroin aqueous solutions with adjusting pH

In this paper, regenerated silk fibroin (SF) aqueous solutions were adjusted to a pH of 6.9 by mimicing the condition in the posterior division of silkworm's gland and rheological behavior of solutions was investigated. The electrospinning technique was used to prepare fibers, and non-woven mats of regenerated B. mori silk fibroin were successfully obtained. The effects of electrospinning parameters on the morphology and diameter of regenerated silk fibers were investigated by orthogonal design. Statistical analysis showed that voltage, the concentration of regenerated SF solutions and the distance between tip and collection plate were the most dominant parameters to fiber morphology, diameter and diameter distribution, respectively. An optimal electrospinning condition was obtained in producing uniform cylindrical fibers with an average diameter of 1300nm. It was as follows: the concentration 30%, voltage 40kV, distance 20cm. The structure of electrospun mats was characterized by Raman spectroscopy (RS), wide-angle X-ray diffraction (WAXD) and modulated differential scanning calorimetry (MDSC). It was found that electrospun mats were predominantly random coil/silk I structure, and the transition to silk II (beta-sheet) rich structure should be further explored.     

Formation of silk fibroin matrices with different texture and its cellular response to normal human keratinocytes

Three forms of silk fibroin (SF) matrices, woven (microfiber), non-woven (nanofiber), and film form, were used to perform a conformational analysis and cell culture using normal human oral keratinocytes (NHOK). To obtain the SF microfiber (SF-M) matrix, natural grey silk was degummed, while the SF film (SF-F) and nanofiber (SF-N) matrices were prepared by casting and electrospinning the formic acid solutions of the regenerated SF, respectively. For insolubilization, as-prepared SF-F and SF-N matrices were chemically treated with an aqueous methanol solution of 50%. The conformational structures of as-prepared and chemically treated SF matrices were investigated using attenuated total reflectance infrared spectroscopy (ATR-IR) and solid-state ¹³C CP/MAS nuclear magnetic resonance (NMR) spectroscopy. The as-cast SF-F matrix formed a mainly β-sheet structure that was similar to the SF-M matrix, whereas the as-spun SF-N matrix had a random coil conformation as the predominant secondary structure. Conformational transitions from random coil to β-sheet of the as-spun SF-N occurred rapidly within 10 min following aqueous methanol treatment, and were confirmed by solid-state ¹³C NMR analysis. To assess the cytocompatibility and cells behavior on the different textures of SF, we examined the cell attachment and spreading of NHOK that was seeded onto the SF matrices, as well as the interaction between the cells and SF matrices. Our results indicate that the SF nanofiber matrix may be more preferable than SF film and SF microfiber matrices for biomedical applications, such as wound dressings and scaffolds for tissue engineering.     

Structure and properties of regenerated Antheraea pernyi silk fibroin in aqueous solution

Antheraea pernyi silk fibroin fibers were dissolved by aqueous lithium thiocyanate to obtain regenerated A. pernyi silk fibroin solution. By means of circular dichroism, ¹³C NMR and Raman spectroscopy, the molecular conformation of regenerated A. pernyi silk fibroin in aqueous solution was investigated. The relationship of environmental factors and sol–gel transformation behavior of regenerated A. pernyi silk fibroin was also studied. The molecular conformations of regenerated A. pernyi silk fibroin mainly were -helix and random coil in solution. There also existed a little β-sheet conformation. It was obviously different with Bombyx mori silk fibroin, whose molecular conformation in solution was only random coil but no -helix existence. With the increase of temperature and solution concentration and with the decrease of solution pH value, the gelation velocity of regenerated A. pernyi silk fibroin solution increased. Especially, it showed that A. pernyi silk fibroin was more sensitive to temperature than B. mori silk fibroin during the sol–gel transformation. The velocity increased obviously when the temperature was above 30 °C. During the sol–gel transformation, the molecular conformation of regenerated A. pernyi silk fibroin changed from random coil to β-sheet structure. The results of these studies provided important insight into the preparation of new biomaterials by silk fibroin protein.     

Effect of pH and copper(II) on the conformation transitions of silk fibroin based on EPR, NMR, and Raman spectroscopy

Much attention has been paid to the natural mechanism of silkworm spinning due to the impressive mechanical properties of the natural fibers. Our results in the present work show that the fractional changes of the conformational components in regenerated silk fibroin (SF) extracted from Bombyx mori fibers is remarkably pH- and Cu(II)-dependent as demonstrated by Cu(II) EPR, (13)C NMR, and Raman spectroscopy. Cu(II) coordination atoms in SF are changed from four nitrogens to two nitrogens and two oxygens as well as to one nitrogen and three oxygens when the pH is lowered from 8.0 to 4.0. The addition of a given amount of Cu(II) into a SF solution could induce efficiently the SF conformational fractional change from silk I, a soluble helical conformation, to silk II, an insoluble beta-sheet conformation. This behavior is strikingly similar to that seen in prion protein and amyloid beta-peptide. On the basis of the similarity in the relevant sequence in SF to the octapeptide PHGGGWGQ in PrP, we suggest that at basic and neutral pH polypeptide AHGGYSGY in SF may form a 1:1 complex with Cu(II) by coordination of imidazole N(pi) of His together with two deprotonated main-chain nitrogens from two glycine residues and one nitrogen or oxygen from serine. Such a type of coordination may make the interaction between two adjacent beta-form polypeptide chains more difficult, thereby leading to an amorphous structure. Under weakly acidic conditions, however, Cu(II)-amide linkages may be broken and Cu(II) may switch to bind two N(tau) from two histidines in adjacent peptide chains, forming an intermolecular His(N(tau))-Cu(II)-His(N(tau)) bridge. This type of coordination may induce beta-sheet formation and aggregation, leading to a crystalline structure.     

Structural characteristics and properties of the regenerated silk fibroin prepared from formic acid

Structural characteristics and thermal and solution properties of the regenerated silk fibroin (SF) prepared from formic acid (FU) were compared with those of SF from water (AU). According to the turbidity and shear viscosity measurement, SF formic acid solution was stable and transparent, no molecular aggregations occurred. The sample FU exhibited the beta-sheet structure, while AU random coil conformation using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry. The effects of methanol treatment on samples were also examined. According to the measurement of crystallinity (XRD) and crystallinity index (FTIR), the concept of long/short-range ordered structure formation was proposed. Long-range ordered crystallites are predominantly formed for methanol treated SF film while SF film cast from formic acid favors the formation of short-range ordered structure. The relaxation temperatures of SF films measured by dynamic thermomechanical analysis supported the above mechanism due to the sensitivity of relaxation temperature on the short-range order.     

pH- and thermal-dependent conformational transition of PGAIPG, a repeated hexapeptide sequence from tropoelastin

The secondary structure of PGAIPG (Pro-Gly-Ala-IIe-Pro-Gly), a repeated hexapeptide of tropoelastin, in buffer solution of different pH was determined by using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. The thermal-dependent structural change of PGAIPG in aqueous solution or in solid state was also examined by thermal FTIR microspectroscopy. The conformation of PGAIPG in aqueous solution exhibited a pH-dependent structural characterization. A predominant peak at 1614 cm(-1) (aggregated beta-sheet) with a shoulder near 1560 cm(-1) (beta-sheet) appeared in pH 5.5-8.5 buffer solutions. A new broad shoulder at 1651 cm(-1) (random coil and/or alpha-helix) with 1614 cm(-1) was observed in the pH 4.5 buffer solution. However, the broad shoulder at 1651 cm(-1) was converted to a maximum peak at 1679 cm(-1) (beta-turn/antiparallel beta-sheet) when the pH shifted from 4.5 to 3.5, but the original pronounced peak at 1614 cm(-1) became a shoulder. Once the pH was lowered to 2.5, the IR spectrum of PGAIPG was dominated by major absorption at 1679 cm(-1) with a minor peak at 1552 cm(-1) (alpha-helix/random coil). The result indicates that the pH was a predominant factor to transform PGAIPG structure from aggregated beta-sheet (pH 8.5) to beta-turn/intermolecular antiparallel beta-sheet (pH 2.5). Moreover, a partial conformation of PGAIPG with minor alpha-helix/random coil structures was also explored in the lower pH buffer solution. There was no thermal-dependent structural change for solid-state PGAIPG. The thermal-induced formation of aggregated beta-sheet for PGAIPG in aqueous solution was found from 28 to 30 degrees C, however, which might be correlated with the formation of an opaque gel that turned from clear solution. The formation of aggregated beta-sheet structure for PGAIPG beyond 30 degrees C might be due to the intermolecular hydrogen bonded interaction between the hydrophobic PGAIPG fragments induced by coacervation.     

Conformation transition kinetics of regenerated Bombyx mori silk fibroin membrane monitored by time-resolved FTIR spectroscopy

The ethanol-induced conformation transition of regenerated Bombyx mori silk fibroin membrane from a poorly defined to the well ordered state was monitored by time-resolved Fourier transform infrared spectroscopy (FTIR) for the first time. From the analysis of FTIR difference spectra, taken on time scales as short as 6 s and up to 1 h after addition of ethanol, intensity vs. time plots of an increasing band at 1618 cm(-1) were observed indicating formation of a beta-sheet coincident with the loss of intensity of a band at 1668 cm(-1) indicating decreases of random coil and/or silk I structure. Both infrared markers were fitted with identical biphasic exponential decay functions, however, there was a clear burst phase occurring prior to the onset of the observed transitions. The conformation transition process is indicated to either proceed sequentially through (at least) two intermediate states that contain different levels of beta-sheet structure or to have parallel pathways of initial beta-sheet formation followed by a slower 'perfection' phase. The first observed process forms in a burst phase a few seconds after mixing (or even faster), prior to the collection of the first spectrum at 6 s. The second observed process occurs with a time constant of approximately 0.5 min, the intermediate present at this stage then continues with a time constant of 5.5 min completing the observed formation of the beta-sheet. The conformation transition of this slower intermediate is not only indicated by an analysis of the kinetics of the random coil and beta-sheet-specific bands discussed above, it roughly coincides with the appearance of an additional infrared marker at 1695 cm(-1), which may be a marker for beta-sheet structure specific to the formation of the perfected structure. The conformation transition of this protein analyzed by infrared spectroscopy provides insight into a part of the fascinating process of cocoon formation in B. mori.     

The natural silk spinning process. A nucleation-dependent aggregation mechanism?

The spinning mechanism of natural silk has been an open issue. In this study, both the conformation transition from random coil to beta sheet and the beta sheet aggregation growth of silk fibroin are identified in the B. mori regenerated silk fibroin aqueous solution by circular dichroism (CD) spectroscopy. A nucleation-dependent aggregation mechanism, similar to that found in prion protein, amyloid beta (Abeta) protein, and alpha-synuclein protein with the conformation transition from a soluble protein to a neurotoxic, insoluble beta sheet containing aggregate, is a novel suggestion for the silk spinning process. We present evidence that two steps are involved in this mechanism: (a) nucleation, a rate-limiting step involving the conversion of the soluble random coil to insoluble beta sheet and subsequently a series of thermodynamically unfavorable association of beta sheet unit, i.e. the formation of a nucleus or seed; (b) once the nucleus forms, further growth of the beta sheet unit becomes thermodynamically favorable, resulting a rapid extension of beta sheet aggregation. The aggregation growth follows a first order kinetic process with respect to the random coil fibroin concentration. The increase of temperature accelerates the beta sheet aggregation growth if the beta sheet seed is introduced into the random coil fibroin solution. This work enhances our understanding of the natural silk spinning process in vivo.     

Time-resolved structural investigation of regenerated silk fibroin nanofibers treated with solvent vapor

Nonwoven matrices of silk fibroin (SF) nanofibers were prepared by electrospinning a regenerated SF solution, followed by treatment with solvent vapor including water, methanol, ethanol, and propanol. Structural changes of solvent vapor-treated SF nanofibers were investigated in a time-resolved manner using IR spectroscopy. Conformational transitions of SF nanofibers from random coil to beta-sheet forms were dependent on the type of solvent vapor used, and their transition rates were strongly influenced by treatment temperatures. Consistent with previous findings, methanol vapor treatment provided a fast and effective means by which to alter the secondary structure of SF nanofibers. However, treatment with water vapor, as compared to treatment with alcohol vapor, was also useful for inducing structural changes in SF nanofibers. As demonstrated in the present study, our approach of controlling secondary structure formation of proteins by solvent vapor treatment and monitoring real-time conformational changes may be useful for the design and tailoring of materials for biomedical applications.     

Investigation of rheological properties and conformation of silk fibroin in the solution of AmimCl

The conformation and eventual morphology of silk fibroin (SF) chains are crucial for the mechanical properties of SF materials, and are strongly related to the solvation step as a key stage in their processing conditions. In this work, a novel SF/AmimCl (1-allyl-3-methylimidazolium chloride) solution with unique properties is reported and compared with conventional regenerated SF aqueous solutions, based on an investigation of its rheological properties. The steady shearing behavior suggested that AmimCl is a good solvent for SF molecules, and shear thinning of semidiluted SF/AmimCl solution at high shear rates showed behavior similar to that in native spinning, which is due to the rearrangement and orientation of SF molecular chains. Fitting of experimental dynamic viscoelastic data to the Rouse model provided an effective method to estimate the molecular weight of SF. We believe that this work not only provides a better understanding of the relationship between properties of silk protein and aggregation states of their molecular chains, but also provides tools to fabricate high-performance SF-based materials.     

Preparation of semi-interpenetrating polymer networks composed of silk fibroin and poloxamer macromer

A system was designed to utilize silk fibroin (SF) as a matrix for wound dressing. For this system, we prepared a sponge type of porous semi-interpenetrating networks (SIPNs) hydrogel composed of SF and poloxamer 407 macromer to enhance the mechanical and functional properties of SF. The thermal and mechanical properties of the hydrogels as well as their swelling behaviors were studied by means of differential scanning calorimetry, compressive modulus measurement, and gravimetric method, respectively. The morphology and crystalline structure of these SIPN hydrogels were also investigated by scanning electron microscopy (SEM) and wide-angle diffractometry, respectively. Conformational change of SF from random coil to beta-sheet structure was accelerated by formation of SIPNs with poloxamer. The melting temperature of poloxamer in the SIPNs decreased due to the prevention of crystallization by the incorporation of SF. The mechanical strength of SIPNs hydrogel was much higher than those of SF itself or SF/poloxamer blend and increased with the poloxamer content. The equilibrium water content of SF was remarkably increased by formation of SIPNs with poloxamer due to the hydrophilicity of poloxamer. The crystallinity and morphology of SIPNs hydrogel were affected by SIPNs hydrogel composition.     

Inhibitor discovery targeting the intermediate structure of beta-amyloid peptide on the conformational transition pathway: implications in the aggregation mechanism of beta-amyloid peptide

Abeta peptides cleaved from the amyloid precursor protein are the main components of senile plaques in Alzheimer's disease. Abeta peptides adopt a conformation mixture of random coil, beta-sheet, and alpha-helix in solution, which makes it difficult to design inhibitors based on the 3D structures of Abeta peptides. By targeting the C-terminal beta-sheet region of an Abeta intermediate structure extracted from molecular dynamics simulations of Abeta conformational transition, a new inhibitor that abolishes Abeta fibrillation was discovered using virtual screening in conjunction with thioflavin T fluorescence assay and atomic force microscopy determination. Circular dichroism spectroscopy demonstrated that the binding of the inhibitor increased the beta-sheet content of Abeta peptides either by stabilizing the C-terminal beta-sheet conformation or by inducing the intermolecular beta-sheet formation. It was proposed that the inhibitor prevented fibrillation by blocking interstrand hydrogen bond formation of the pleated beta-sheet structure commonly found in amyloid fibrils. The study not only provided a strategy for inhibitor design based on the flexible structures of amyloid peptides but also revealed some clues to understanding the molecular events involved in Abeta aggregation.     

Solution conformations and aggregational properties of synthetic amyloid beta-peptides of Alzheimer's disease. Analysis of circular dichroism spectra.

The A4 or beta-peptide (39 to 43 amino acid residues) is the principal proteinaceous component of amyloid deposits in Alzheimer's disease. Using circular dichroism (c.d.), we have studied the secondary structures and aggregational properties in solution of 4 synthetic amyloid beta-peptides: beta-(1-28), beta-(1-39), beta-(1-42) and beta-(29-42). The natural components of cerebrovascular deposits and extracellular amyloid plaques are beta-(1-39) and beta-(1-42), while beta-(1-28) and beta-(29-42) are unnatural fragments. The beta-(1-28), beta-(1-39) and beta-(1-42) peptides adopt mixtures of beta-sheet, alpha-helix and random coil structures, with the relative proportions of each secondary structure being strongly dependent upon the solution conditions. In aqueous solution, beta-sheet structure is favored for the beta-(1-39) and beta-(1-42) peptides, while in aqueous solution containing trifluoroethanol (TFE) or hexafluoroisopropanol (HFIP), alpha-helical structure is favored for all 3 peptides. The alpha-helical structure unfolds with increasing temperature and is favored at pH 1 to 4 and pH 7 to 10; the beta-sheet conformation is temperature insensitive and is favored at pH 4 to 7. Peptide concentration studies showed that the beta-sheet conformation is oligomeric (intermolecular), whereas the alpha-helical conformation is monomeric (intramolecular). The rate of aggregation to the oligomeric beta-sheet structure (alpha-helix----random coil----beta-sheet) is also dependent upon the solution conditions such as the pH and peptide concentration; maximum beta-sheet formation occurs at pH 5.4. These results suggest that beta-peptide is not an intrinsically insoluble peptide. Thus, solution abnormalities, together with localized high peptide concentrations, which may occur in Alzheimer's disease, may contribute to the formation of amyloid plaques. The hydrophobic beta-(29-42) peptide adopts exclusively an intermolecular beta-sheet conformation in aqueous solution despite changes in temperature or pH. Therefore, this segment may be the first region of the beta-peptide to aggregate and may direct the folding of the complete beta-peptide to produce the beta-pleated sheet structure found in amyloid deposits. Differences between the solution conformations of the beta-(1-39) and beta-(1-42) peptides suggests that the last 3 C-terminal amino acids are crucial to amyloid deposition.     

Conformational transitions and fibrillation mechanism of human calcitonin as studied by high-resolution solid-state 13C NMR

Conformational transitions of human calcitonin (hCT) during fibril formation in the acidic and neutral conditions were investigated by high-resolution solid-state 13C NMR spectroscopy. In aqueous acetic acid solution (pH 3.3), a local alpha-helical form is present around Gly10 whereas a random coil form is dominant as viewed from Phe22, Ala26, and Ala31 in the monomer form on the basis of the 13C chemical shifts. On the other hand, a local beta-sheet form as viewed from Gly10 and Phe22, and both beta-sheet and random coil as viewed from Ala26 and Ala31 were detected in the fibril at pH 3.3. The results indicate that conformational transitions from alpha-helix to beta-sheet, and from random coil to beta-sheet forms occurred in the central and C-terminus regions, respectively, during the fibril formation. The increased 13C resonance intensities of fibrils after a certain delay time suggests that the fibrillation can be explained by a two-step reaction mechanism in which the first step is a homogeneous association to form a nucleus, and the second step is an autocatalytic heterogeneous fibrillation. In contrast to the fibril at pH 3.3, the fibril at pH 7.5 formed a local beta-sheet conformation at the central region and exhibited a random coil at the C-terminus region. Not only a hydrophobic interaction among the amphiphilic alpha-helices, but also an electrostatic interaction between charged side chains can play an important role for the fibril formation at pH 7.5 and 3.3 acting as electrostatically favorable and unfavorable interactions, respectively. These results suggest that hCT fibrils are formed by stacking antiparallel beta-sheets at pH 7.5 and a mixture of antiparallel and parallel beta-sheets at pH 3.3.     

Temperature-dependent beta-sheet formation in beta-amyloid Abeta(1-40) peptide in water: uncoupling beta-structure folding from aggregation

To probe the role of temperature in the conversion of soluble Alzheimer's beta-amyloid peptide (Abeta) to insoluble beta-sheet rich aggregates, we analyzed the solution conformation of Abeta(1-40) from 0 to 98 degrees C by far-UV circular dichroism (CD) and native gel electrophoresis. The CD spectra of 15-300 microg/ml Abeta(1-40) in aqueous solution (pH approximately 4.6) at 0 degrees C are concentration-independent and suggest a substantially unfolded and/or unusually folded conformation characteristic of Abeta monomer or dimer. Heating from 0 to 37 degrees C induces a rapid reversible coil to beta-strand transition that is independent of the peptide concentration and thus is not linked to oligomerization. Consequently, this transition may occur within the Abeta(1-40) monomer or dimer. Incubation at 37 degrees C leads to slow reversible concentration-dependent beta-sheet accumulation; heating to 85 degrees C induces further beta-sheet folding and oligomerization. Our results demonstrate the importance of temperature and thermal history for the conformation of Abeta.     

Enzymatic grafting of chitosan onto Bombyx mori silk fibroin: kinetic and IR vibrational studies

The potential for using tyrosinase to graft the polysaccharide chitosan (Ch) onto Bombyx mori silk fibroin (SF) was examined. FT-IR spectroscopy coupled to HPLC amino acid analysis showed that mushroom tyrosinase (MT) catalyses the oxidation of tyrosine (Tyr) of SF to electrophilic o-quinones. Kinetic studies showed that only a fraction of the Tyr residues available on the SF chain were oxidized. This result was interpreted in the light of the structure assumed by SF in aqueous solution: Tyr aromatic side chain groups buried into the folded hydrophobic portions of the chain were probably less accessible to MT for steric reasons. Using slightly acidic conditions (pH 6), it was possible to modify SF under homogeneous conditions. FT-IR spectroscopy provided evidence that Ch was grafted onto MT-oxidized SF: the o-quinones were found to undergo a subsequent non-enzymatic reaction with nucleophilic amino groups of Ch via Schiff-base and Michael addition mechanisms. Various factors, i.e. reaction time, pH, MT/SF ratio, were found to influence the grafting yield. The highest grafting yield was achieved at pH 7, i.e. more favorable to MT activity rather than to Ch solubility, suggesting that the determining step of the grafting reaction is the formation of o-quinones. The FT-IR spectroscopy revealed that grafting induced a beta-sheet --> random coil conformational transition.     

Conformation transition in silk protein films monitored by time-resolved Fourier transform infrared spectroscopy: effect of potassium ions on Nephila spidroin films

We used time-resolved Fourier transform infrared spectroscopy (FTIR) to follow a conformation transition in Nephila spidroin film from random coil and/or helical structures to beta-sheet induced by the addition of KCl from 0.01 to 1.0 mol/L in D(2)O. Time series difference spectra showed parallel increases in absorption at 1620 and 1691 cm(-)(1), indicating formation of beta-sheet, together with a coincident loss of intensity of approximately 1650 cm(-)(1), indicating decrease of random coil and/or helical structures. Increase in KCl concentration produced an increased rate of the conformation transition that may attributable to weakening of hydrogen bonds within spidroin macromolecules. The conformation transition was a biphasic process with [KCl] > or = 0.3 mol/L but monophasic with [KCl] < or = 0.1 mol/L. This suggests that, at high KCl concentrations, segments of the molecular chain are adjusted first and then the whole molecule undergoes rearrangement. We discuss the possible significance of these findings to an understanding of the way that spiders spin silk.