Identification of the minimal domain structure of bone morphogenetic protein-1 (BMP-1) for chordinase activity: chordinase activity is not enhanced by procollagen C-proteinase enhancer-1 (PCPE-1)

Bone morphogenetic protein 1 (BMP-1), which is a tolloid member of the astacin-like family of zinc metalloproteinases, is a highly effective procollagen C-proteinase (PCP) and chordinase. On the other hand, mammalian tolloid like-2 (mTLL-2) does not cleave chordin or procollagen; procollagen is cleaved by mTLL-2 in the presence of high levels of procollagen C-proteinase enhancer-1 (PCPE-1), for reasons that are unknown. We used these differences in activity between BMP-1 and mTLL-2 to narrow in on the domains in BMP-1 that specify PCP and chordinase activity. Using a domain swap approach, we showed that: 1) the metalloproteinase and CUB2 domains of BMP-1 are absolutely required for PCP activity; swaps with either of the corresponding domains in BMP-1 and mTLL-2 did not result in procollagen cleavage and 2) the proteinase domain of mTLL-2 can cleave chordin if coupled to the CUB1 domain of BMP-1. Therefore, the minimal structure for chordinase activity comprises a metalloproteinase domain (either from BMP-1 or from mTLL-2) and the CUB1 domain of BMP-1 (the CUB1 domain of mTLL-2 cannot substitute for the CUB1 domain of BMP-1). We showed that the minimal procollagen C-proteinase (BMP-1 lacking the EGF and CUB3 domain) was enhanced by PCPE-1 but not as well as BMP-1 retaining the CUB3 domain. Further studies showed that PCPE-1 had no effect on the ability of BMP-1 to cleave chordin. The data support a previously suggested mechanism of PCPE-1 whereby PCPE-1 interacts with procollagen, but in addition, the CUB3 domain of BMP-1 appears to augment the interaction.     

Binding of Procollagen C-Proteinase Enhancer-1 (PCPE-1) to Heparin/Heparan Sulfate: PROPERTIES AND ROLE IN PCPE-1 INTERACTION WITH CELLS*

Procollagen C-proteinase enhancer-1 (PCPE-1) is an extracellular matrix (ECM) glycoprotein that can stimulate procollagen processing by procollagen C-proteinases (PCPs) such as bone morphogenetic protein-1 (BMP-1). The PCPs can process additional extracellular protein precursors and play fundamental roles in developmental processes and assembly of the ECM. The stimulatory activity of PCPE-1 is restricted to the processing of fibrillar procollagens, suggesting PCPE-1 is a specific regulator of collagen deposition. PCPE-1 consists of two CUB domains that bind to the procollagen C-propeptides and are required for PCP enhancing activity, and one NTR domain that binds heparin. To understand the biological role of the NTR domain, we performed surface plasmon resonance (SPR) binding assays, cell attachment assays as well as immunofluorescence and activity assays, all indicating that the NTR domain can mediate PCPE-1 binding to cell surface heparan sulfate proteoglycans (HSPGs). The SPR data revealed binding affinities to heparin/HSPGs in the high nanomolar range and dependence on calcium. Both 3T3 mouse fibroblasts and human embryonic kidney cells (HEK-293) attached to PCPE-1, an interaction that was inhibited by heparin. Cell attachment was also inhibited by an NTR-specific antibody and the NTR fragment. Immunofluorescence analysis revealed that PCPE-Flag binds to mouse fibroblasts and heparin competes for this binding. Cell-associated PCPE-Flag stimulated procollagen processing by BMP-1 several fold. Our data suggest that through interaction with cell surface HSPGs, the NTR domain can anchor PCPE-1 to the cell membrane, permitting pericellular enhancement of PCP activity. This points to the cell surface as a physiological site of PCPE-1 action.     

Bone morphogenetic protein-1 (BMP-1). Identification of the minimal domain structure for procollagen C-proteinase activity

Bone morphogenetic protein-1 (BMP-1) is a shorter spliced variant of mammalian tolloid (mTld), both of which cleave the C-propeptides of type I procollagen during the synthesis of extracellular matrix collagen fibrils. The fact that BMP-1 and mTld both exhibit procollagen C-proteinase (PCP) activity and that BMP-1 is the smaller variant might indicate that BMP-1 comprises the minimal required sequences for PCP activity. BMP-1 comprises a metalloproteinase domain, three CUB domains, and an epidermal growth factor (EGF)-like domain, which is located between the second and third CUB (complement components C1r/C1s, the sea urchin protein Uegf, and BMP-1) domains. In this study we showed the following. 1) The CUB1 domain is required for secretion of the molecule. Domain swapping experiments, in which CUB1 and other CUB domains were interchanged, resulted in retention of the proteins by cells. Therefore, CUB1 and its location immediately adjacent to the metalloproteinase domain are essential for secretion of the protein. 2) Mutants lacking the EGF-like and CUB3 domains exhibited full C-proteinase activity. In contrast, mutants lacking the CUB2 domain were poor C-proteinases. 3) Further studies showed that Glu-483 on the beta4-beta5 loop of CUB2 is essential for C-proteinase activity of BMP-1. In conclusion, the study showed that the minimal domain structure for PCP activity is considerably shorter than expected and comprises the metalloproteinase domain and the CUB1 and CUB2 domains of BMP-1.     

Bone morphogenetic protein-1 (BMP-1) mediates C-terminal processing of procollagen V homotrimer

The processing of the fibrillar procollagen precursors to mature collagens is an essential requirement for fibril formation. The enzymes involved in these events are known as the procollagen N and C proteinases. The latter, which cleaves the C-propeptides of the fibrillar procollagens I-III, is identical to the previously described bone morphogenetic protein-1 (BMP-1). Surprisingly, unlike the other fibrillar collagens, the processing of the C-propeptide domain of the procollagen V homotrimer was found to be mediated by furin rather than BMP-1. However, the presence of putative BMP-1 cleavage sites in the alpha1(V) C-propeptide sequence prompted us to reconsider the procollagen V C-propeptide cleavage by BMP-1. Using a recombinant system to produce substantial amounts of the proalpha1(V) homotrimer, we have previously shown that the C-propeptide is spontaneously released in the culture medium. The trimeric C-propeptide fragment, resulting from the furin cleavage, still encompassed the predicted BMP-1 cleavage sites. It was purified and tested as a substrate for BMP-1. In parallel, the release of the C-propeptide in the culture medium was inhibited by the addition of a specific furin inhibitor, allowing the re-examination of BMP-1 activity on the intact molecule. We showed that BMP-1 does cleave both substrates at one of the two predicted C-proteinase cleavage sites. Our results favor a role for PCP/BMP-1 in physiological C-terminal processing of procollagen V and imply a general mechanism for fibrillar collagen C-terminal processing.     

beta(2)-Microglobulin-selective direct hemoperfusion column for the treatment of dialysis-related amyloidosis

Lixelle is a direct hemoperfusion-type adsorption column that was developed to selectively eliminate beta2-microglobulin (beta2-m) from the circulating blood of patients with dialysis-related amyloidosis (DRA). The adsorbent in Lixelle comprises porous cellulose beads to which hydrophobic hexadecyl alkyl chain is covalently bound. One milliliter of wet Lixelle beads eliminates more than 1 mg of beta2-m in vitro. In hemodialysis patients who were treated with Lixelle, Lixelle improved joint pain, nocturnal awakening, pinch strength, motor terminal latency, and their activity of daily living. The adsorbent adsorbs beta2-m selectively but not specifically, as well as inflammatory cytokines such as interleukin-1beta and IL-6 which are considered to be involved in the development of DRA. Lixelle treatments reduce the circulating levels of beta2-m and inflammatory cytokines, thereby improving the symptoms of patients with DRA.     

Substrate-specific modulation of a multisubstrate proteinase. C-terminal processing of fibrillar procollagens is the only BMP-1-dependent activity to be enhanced by PCPE-1

Members of the bone morphogenetic protein-1/tolloid (BMP-1/Tld) family of metalloproteinases, also known as procollagen C-proteinases (PCPs), control multiple biological events (including matrix assembly, cross-linking, cell adhesion/migration and pattern formation) through enzymatic processing of several extracellular substrates. PCP activities on fibrillar procollagens can be stimulated by another family of extracellular proteins, PCP enhancers (PCPE-1, PCPE-2), which lack intrinsic enzymatic activity. While PCPs have multiple substrates, the extent to which PCPEs is involved in the processing of proteins other than fibrillar procollagens is unknown. In the experiments reported here, PCPE-1 was found to have no effect on the in vitro BMP-1 processing of procollagen VII, the procollagen V N-propeptide, the laminin 5 gamma2 chain, osteoglycin, prolysyl oxidase, or chordin. In contrast, PCPE-1 enhanced C-terminal processing of human fibrillar procollagen III but only when this substrate was in its native, disulfide-bonded conformation. Surprisingly, processing of procollagen III continued to be enhanced when essentially all the triple-helical region was removed. These and previous results (Ricard-Blum, S., Bernocco, S., Font, B., Moali, C., Eichenberger, D., Farjanel, J., Burchardt, E. R., van der Rest, M., Kessler, E., and Hulmes, D. J. S. (2002) J. Biol. Chem. 277, 33864-33869; Bernocco, S., Steiglitz, B. M., Svergun, D. I., Petoukhov, M. V., Ruggiero, F., Ricard-Blum, S., Ebel, C., Geourjon, C., Deleage, G., Font, B., Eichenberger, D., Greenspan, D. S., and Hulmes, D. J. S. (2003) J. Biol. Chem. 278, 7199-7205) indicate that the mechanism of PCPE-1 action involves recognition sites in both the C-propeptide domain and in the C-telopeptide region of the procollagen molecule. PCPEs therefore define a new class of extracellular adaptor proteins that stimulate proteinase activity in a substrate-specific manner, thereby providing a new target for the selective regulation of PCP activity on fibrillar procollagen substrates.     

Historical background and clinical treatment of dialysis-related amyloidosis

Dialysis-related amyloidosis (DRA) is a frequent and serious complication in patients on long-term dialysis. The amyloid has a marked affinity for joint tissues, and carpal tunnel syndrome, polyarthralgia, destructive spondyloarthropathy, and bone cysts are the major clinical manifestations of DRA. beta(2)-Microglobulin (beta(2)-m) was identified as the major protein constituent of the amyloid fibrils. Risk factors for the development of DRA include age, duration of dialysis treatment, use of low-flux dialysis membrane, use of low purity dialysate, monocyte chemoattractant protein-1 GG genotype, and apolipoprotein E4 allele, although the retention of beta(2)-m in the plasma appears to be prerequisite. Clinical therapeutic strategies for DRA include dialysis, medical or surgical therapy, and renal transplantation. Preventive measures have attempted to remove beta(2)-m from the serum by using high-flux membranes and a beta(2)-m adsorption column in hemodialysis. Renal transplantation is a radical approach to treating the arthralgias attributed to the amyloid deposits while the regression of dialysi-related amyloid deposits is not identified after successful renal transplantation in many studies. It is necessary to elucidate the pathogenesis of DRA and to establish more effective prevention and therapy in the future.     

Procollagen C-proteinase enhancer stimulates procollagen processing by binding to the C-propeptide region only

Bone morphogenetic protein-1 (BMP-1) and the tolloid-like metalloproteinases control several aspects of embryonic development and tissue repair. Unlike other proteinases whose activities are regulated mainly by endogenous inhibitors, regulation of BMP-1/tolloid-like proteinases relies mostly on proteins that stimulate activity. Among these, procollagen C-proteinase enhancers (PCPEs) markedly increase BMP-1/tolloid-like proteinase activity on fibrillar procollagens, in a substrate-specific manner. Here, we performed a detailed quantitative study of the binding of PCPE-1 and of its minimal active fragment (CUB1-CUB2) to three regions of the procollagen III molecule: the triple helix, the C-telopeptide, and the C-propeptide. Contrary to results described elsewhere, we found the PCPE-1-binding sites to be located exclusively in the C-propeptide region. In addition, binding and enhancing activities were found to be independent of the glycosylation state of the C-propeptide. These data exclude previously proposed mechanisms for the action of PCPEs and also suggest new mechanisms to explain how these proteins can stimulate BMP-1/tolloid-like proteinases by up to 20-fold.     

Role of the C-terminal 28 residues of beta2-microglobulin in amyloid fibril formation

Beta2microglobulin (beta2m) is the major protein component of the fibrillar amyloid deposits isolated from patients diagnosed with dialysis-related amyloidosis (DRA). While investigating the molecular mechanism of amyloid fibril formation by beta2m, we found that the beta2m C-terminal peptide of 28 residues (cbeta2m) itself forms amyloid fibrils. When viewed by electron microscopy, cbeta2m aggregates appear as elongated unbranched fibers, the morphology typical for amyloids. Cbeta2m fibers stain with Congo red and show apple-green birefringence in polarized light, characteristic of amyloids. The observation that the beta2m C-terminal fragment readily forms amyloid fibrils implies that beta2m amyloid fibril formation proceeds via interactions of amyloid forming segments, which become exposed when the beta2m subunit is partially unfolded.     

The interaction of recombinant subdomains of the procollagen C-proteinase with procollagen I provides a quantitative explanation for functional differences between the two splice variants, mammalian tolloid and bone morphogenetic protein 1

The procollagen C-proteinase (PCP) is a zinc peptidase of the astacin family and the metzincin superfamily. The enzyme removes the C-terminal propeptides of fibrillar procollagens and activates other matrix proteins. Besides its catalytic protease domain, the procollagen C-proteinase contains several C-terminal CUB modules (named after complement factors C1r and C1s, the sea urchin UEGF protein, and BMP-1) and EGF-like domains. The two major splice forms of the C-proteinase differ in their overall domain composition. The longer variant, termed mammalian tolloid (mTld, i.e., PCP-2), has the protease-CUB1-CUB2-EGF1-CUB3-EGF2-CUB4-CUB5 composition, whereas the shorter form termed bone morphogenetic protein 1 (BMP-1, i.e., PCP-1) ends after the CUB3 domain. Two related genes encode proteases similar to mTld in humans and have been termed mammalian tolloid like-1 and -2 (mTll-1 and mTll-2, respectively). For mTll-1, it has been shown that it has C-proteinase activity. We demonstrate that recombinant EGF1-CUB3, CUB3, CUB3-EGF2, EGF2-CUB4, and CUB4-CUB5 modules of the procollagen C-proteinase can be expressed in bacteria and adopt a functional antiparallel beta-sheet conformation. As shown by surface plasmon resonance analysis, the modules bind to procollagen I in a 1:1 stoichiometry with dissociation constants (K(D)) ranging from 622.0 to 1.0 nM. Their binding to mature collagen I is weaker by at least 1 order of magnitude. Constructs containing EGF domains bind more strongly than those consisting of CUB domains only. This suggests that a combination of CUB and EGF domains serves as the minimal functional unit. The binding affinities of the EGF-containing modules for procollagen increase in the order EGF1-CUB3 < CUB3-EGF2 < EGF2-CUB4. In the context of the full length PCP, this implies that a given module has an affinity that continues to increase the more C-terminally the module is located within the PCP. The tightest binding module, EGF2-CUB4 (K(D) = 1.0 nM), is only present in mTld, which might provide a quantitative explanation for the different efficiencies of BMP-1 and mTld in procollagen C-proteinase activity.     

Investigation of a peptide responsible for amyloid fibril formation of beta 2-microglobulin by achromobacter protease I.

To obtain insight into the mechanism of amyloid fibril formation from beta(2)-microglobulin (beta2-m), we prepared a series of peptide fragments using a lysine-specific protease from Achromobacter lyticus and examined their ability to form amyloid fibrils at pH 2.5. Among the nine peptides prepared by the digestion, the peptide Ser(20)-Lys(41) (K3) spontaneously formed amyloid fibrils, confirmed by thioflavin T binding and electron microscopy. The fibrils composed of K3 peptide induced fibril formation of intact beta2-m with a lag phase, distinct from the extension reaction without a lag phase observed for intact beta2-m seeds. Fibril formation of K3 peptide with intact beta2-m seeds also exhibited a lag phase. On the other hand, the extension reaction of K3 peptide with the K3 seeds occurred without a lag phase. At neutral pH, the fibrils composed of either intact beta2-m or K3 peptide spontaneously depolymerized. Intriguingly, the depolymerization of K3 fibrils was faster than that of intact beta2-m fibrils. These results indicated that, although K3 peptide can form fibrils by itself more readily than intact beta2-m, the K3 fibrils are less stable than the intact beta2-m fibrils, suggesting a close relation between the free energy barrier of amyloid fibril formation and its stability.     

Conformational dynamics of beta(2)-microglobulin analyzed by reduction and reoxidation of the disulfide bond

Although native beta(2)-microglobulin (beta2-m), the light chain of the major histocompatibility complex class I antigen, assumes an immunoglobulin domain fold, it is also found as a major component of dialysis-related amyloid fibrils. In the amyloid fibrils, the conformation of beta2-m is considered to be largely different from that of the native state, and a monomeric denatured form is likely to be a precursor to the amyloid fibril. To obtain insight into the conformational dynamics of beta2-m leading to the formation of amyloid fibrils, we studied the reduction and reoxidation of the disulfide bond by reduced and oxidized dithiothreitol, respectively, and the effects on the reduction of the chaperonin GroEL, a model protein that might destabilize the native state of beta2-m. We show that beta2-m occasionally unfolds into a denatured form even under physiological conditions and that this transition is promoted upon interaction with GroEL. The results imply that in vivo interactions of beta2-m with other proteins or membrane components could destabilize its native structure, thus stabilizing the amyloid precursor.     

Ultrasonication-induced amyloid fibril formation of beta2-microglobulin

To obtain insight into the mechanism of fibril formation, we examined the effects of ultrasonication, a strong agitator, on beta2-microglobulin (beta2-m), a protein responsible for dialysis-related amyloidosis. Upon sonication of an acid-unfolded beta2-m solution at pH 2.5, thioflavin T fluorescence increased markedly after a lag time of 1-2 h with a simultaneous increase of light scattering. Atomic force microscopy images showed the formation of a large number of short fibrils 3 nm in diameter. When the sonication-induced fibrils were used as seeds in the next seeding experiment at pH 2.5, a rapid and intense formation of long fibrils 3 nm in diameter was observed demonstrating seed-dependent fibril growth. We then examined the effects of sonication on the native beta2-m at neutral pH, conditions under which amyloid deposits occur in patients. In the presence of 0.5 mm sodium dodecyl sulfate, a model compound of potential trigger and stabilizer of amyloid fibrils in patients, a marked increase of thioflavin T fluorescence was observed after 1 day of sonication at pH 7.0. The products of sonication caused the accelerated fibril formation at pH 7.0. Atomic force microscopy images showed that the fibrils formed at pH 7.0 have a diameter of more than 7 nm, thicker than those prepared at pH 2.5. These results indicate that ultrasonication is one form of agitation triggering the formation of amyloid fibrils of beta2-m, producing fibrils adapted to the respective pH.     

Core and heterogeneity of beta2-microglobulin amyloid fibrils as revealed by H/D exchange

Dialysis-related amyloidosis, which occurs in the patients receiving a long-term hemodialysis with high frequency, accompanies the deposition of amyloid fibrils composed of beta(2)-microglobulin (beta2-m). In vitro, beta2-m forms two kinds of fibrous structures at acidic pH. One is a rigid "mature fibril", and the other is a flexible thin filament often called an "immature fibril". In addition, a 22-residue peptide (K3 peptide) corresponding to Ser20 to Lys41 of intact beta2-m forms rigid amyloid-like fibrils similar to mature fibrils. We compared the core of these three fibrils at single-residue resolution using a recently developed hydrogen/deuterium (H/D) exchange method with the dissolution of fibrils by dimethylsulfoxide (DMSO). The exchange time-course of these fibrils showed large deviations from a single exponential curve showing that, because of the supramolecular structures, the same residue exists in different environments from molecule to molecule, even in a single fibril. The exchange profiles revealed that the core of the immature fibril is restricted to a narrow region compared to that of the mature fibril. In contrast, all residues were protected from exchange in the K3 fibril, indicating that a whole region of the peptide is engaged in the beta-sheet network. These results suggest the mechanism of amyloid fibril formation, in which the core beta-sheet formed by a minimal sequence propagates to form a rigid and extensive beta-sheet network.     

Heparin strongly enhances the formation of beta2-microglobulin amyloid fibrils in the presence of type I collagen

The tissue specificity of fibrillar deposition in dialysis-related amyloidosis is most likely associated with the peculiar interaction of beta2-microglobulin (beta2-m) with collagen fibers. However, other co-factors such as glycosaminoglycans might facilitate amyloid formation. In this study we have investigated the role of heparin in the process of collagen-driven amyloidogenesis. In fact, heparin is a well known positive effector of fibrillogenesis, and the elucidation of its potential effect in this type of amyloidosis is particularly relevant because heparin is regularly given to patients subject to hemodialysis to prevent blood clotting. We have monitored by atomic force microscopy the formation of beta2-m amyloid fibrils in the presence of collagen fibers, and we have discovered that heparin strongly accelerates amyloid deposition. The mechanism of this effect is still largely unexplained. Using dynamic light scattering, we have found that heparin promotes beta2-m aggregation in solution at pH 6.4. Morphology and structure of fibrils obtained in the presence of collagen and heparin are highly similar to those of natural fibrils. The fibril surface topology, investigated by limited proteolysis, suggests that the general assembly of amyloid fibrils grown under these conditions and in vitro at low pH is similar. The exposure of these fibrils to trypsin generates a cleavage at the C-terminal of lysine 6 and creates the 7-99 truncated form of beta2-m (DeltaN6beta2-m) that is a ubiquitous constituent of the natural beta2-m fibrils. The formation of this beta2-m species, which has a strong propensity to aggregate, might play an important role in the acceleration of local amyloid deposition.     

Low concentrations of sodium dodecyl sulfate induce the extension of beta 2-microglobulin-related amyloid fibrils at a neutral pH

In beta(2)-microglobulin-related (Abeta2M) amyloidosis, partial unfolding of beta(2)-microglobulin (beta2-m) is believed to be prerequisite to its assembly into Abeta2M amyloid fibrils in vivo. Although low pH or 2,2,2-trifluoroethanol at a low concentration has been reported to induce partial unfolding of beta2-m and subsequent amyloid fibril formation in vitro, factors that induce them under near physiological conditions have not been determined. Using fluorescence spectroscopy with thioflavin T, circular dichroism spectroscopy, and electron microscopy, we here show that at low concentrations, sodium dodecyl sulfate (SDS) converts natively folded beta2-m monomers into partially folded, alpha-helix-containing conformers. Surprisingly, this results in the extension of Abeta2M amyloid fibrils at neutral pH, which could be explained basically by a first-order kinetic model. At low concentrations, SDS also stabilized the fibrils at neutral pH. These SDS effects were concentration-dependent and maximal at approximately 0.5 mM, around the critical micelle concentration of SDS (0.67 mM). As the concentration of SDS was increased above 1 mM, the alpha-helix content of beta2-m rose to approximately 10%, while the beta-sheet content decreased to approximately 20%, a change paralleled by a complete cessation of fibril extension and the destabilization of the fibrils. Detergents of other classes had no significant effect on the extension of fibrils. These findings are consistent with the hypothesis that in vivo, specific factors (e.g., phospholipids) that affect the conformation and stability of beta2-m and amyloid fibrils will have significant effects on the kinetics of Abeta2M fibril formation.     

Growth of beta(2)-microglobulin-related amyloid fibrils by non-esterified fatty acids at a neutral pH

Abeta2M (beta(2)-microglobulin-related) amyloidosis is a frequent and serious complication in patients on long-term dialysis. Partial unfolding of beta2-m (beta(2)-microglobulin) may be essential to its assembly into Abeta2M amyloid fibrils in vivo. Although SDS around the critical micelle concentration induces partial unfolding of beta2-m to an alpha-helix-containing aggregation-prone amyloidogenic conformer and subsequent amyloid fibril formation in vitro, the biological molecules with similar activity under near-physiological conditions are still unknown. The effect of various NEFAs (non-esterified fatty acids), which are representative anionic amphipathic compounds in the circulation, on the growth of Abeta2M amyloid fibrils at a neutral pH was examined using fluorescence spectroscopy with thioflavin T, CD spectroscopy, and electron microscopy. Physiologically relevant concentrations of laurate, myristate, oleate, linoleate, and mixtures of palmitate, stearate, oleate and linoleate, induced the growth of fibrils at a neutral pH by partially unfolding the compact structure of beta2-m to an aggregation-prone amyloidogenic conformer. In the presence of human serum albumin, these NEFAs also induced the growth of fibrils when their concentrations exceeded the binding capacity of albumin, indicating that the unbound NEFAs rather than albumin-bound NEFAs induce the fibril growth reaction in vitro. These results suggest the involvement of NEFAs in the development of Abeta2M amyloidosis, and in the pathogenesis of Abeta2M amyloidosis.     

Strong Cooperativity and Loose Geometry between CUB Domains Are the Basis for Procollagen C-Proteinase Enhancer Activity

Procollagen C-proteinase enhancers (PCPE-1 and -2) specifically activate bone morphogenetic protein-1 (BMP-1) and other members of the tolloid proteinase family during C-terminal processing of fibrillar collagen precursors. PCPEs consist of two CUB domains (CUB1 and CUB2) and one NTR domain separated by one short and one long linker. It was previously shown that PCPEs can strongly interact with procollagen molecules, but the exact mechanism by which they enhance BMP-1 activity remains largely unknown. Here, we used a series of deletion mutants of PCPE-1 and two chimeric constructs with repetitions of the same CUB domain to study the role of each domain and linker. Out of all the forms tested, only those containing both CUB1 and CUB2 were capable of enhancing BMP-1 activity and binding to a mini-procollagen substrate with nanomolar affinity. Both these properties were lost by individual CUB domains, which had dissociation constants at least three orders of magnitude higher. In addition, none of the constructs tested could inhibit PCPE activity, although CUB2CUB2NTR was found to modulate BMP-1 activity through direct complex formation with the enzyme, resulting in a decreased rate of substrate processing. Finally, increasing the length of the short linker between CUB1 and CUB2 was without detrimental effect on both activity and substrate binding. These data support the conclusion that CUB1 and CUB2 bind to the procollagen substrate in a cooperative manner, involving the short linker that provides a flexible tether linking the two binding regions.     

Amyloidogenic synthetic peptides of beta2-microglobulin--a role of the disulfide bond

To search for the essential regions responsible for the beta2-microglobulin (beta2-m) amyloid fibril formation, we synthesized six peptides corresponding to six of the seven beta-sheets in the native structure of beta2-m, and examined their amyloidogenicity. Among the peptides examined, peptide (21-31) (strand B) and the mixture of peptide (21-31) and (78-86) (strand F) showed fibril formation at both pH 2.5 and 7.5. Peptide (21-31) is the N-terminal half of the previously reported proteolytic fragment of beta2-m, Ser21-Lys41 (K3), suggesting that this region may be the essential core. Interestingly, the dimer formation of peptide (21-31) by the disulfide bond substantially facilitated the fibril formation, indicating that the disulfide bond is important for the structural stability of the fibrils.