Nanofibers from blends of polyvinyl alcohol and polyhydroxy butyrate as potential scaffold material for tissue engineering of skin

Nanofibers were prepared by electrospinning from pure polyvinyl alcohol (PVA), polyhydroxybutyrate (PHB), and their blends. Miscibility and morphology of both polymers in the nanofiber blends were studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC), revealing that PVA and PHB were miscible with good compatibility. DSC also revealed suppression of crystallinity of PHB in the blend nanofibers with increasing proportion of PVA. The hydrolytic degradation of PHB was accelerated with increasing PVA fraction. Cell culture experiments with a human keratinocyte cell line (HaCaT) and dermal fibroblast on the electrospun PHB and PVA/PHB blend nanofibers showed maximum adhesion and proliferation on pure PHB. However, the addition of 5 wt % PVA to PHB inhibited growth of HaCaT cells but not of fibroblasts. On the contrary, adhesion and proliferation of HaCaT cells were promoted on PVA/PHB (50/50) fibers, which inhibited growth of fibroblasts.     

Electrospun water-soluble carboxyethyl chitosan/poly(vinyl alcohol) nanofibrous membrane as potential wound dressing for skin regeneration

Biocompatible carboxyethyl chitosan/poly(vinyl alcohol) (CECS/PVA) nanofibers were successfully prepared by electrospinning of aqueous CECS/PVA solution. The composite nanofibrous membranes were subjected to detailed analysis by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). SEM images showed that the morphology and diameter of the nanofibers were mainly affected by the weight ratio of CECS/PVA. XRD and DSC demonstrated that there was strong intermolecular hydrogen bonding between the molecules of CECS and PVA. The crystalline microstructure of the electrospun fibers was not well developed. The potential use of the CECS/PVA electrospun fiber mats as scaffolding materials for skin regeneration was evaluated in vitro using mouse fibroblasts (L929) as reference cell lines. Indirect cytotoxicity assessment of the fiber mats indicated that the CECS/PVA electrospun mat was nontoxic to the L929 cell. Cell culture results showed that fibrous mats were good in promoting the cell attachment and proliferation. This novel electrospun matrix would be used as potential wound dressing for skin regeneration.     

Electrospun core-shell nanofibers from homogeneous solution of poly(vinyl alcohol)/bovine serum albumin

We report on the preparation and characterization of core-shell structure of bovine serum albumin (BSA) blended poly(vinyl alcohol) (PVA) composite nanofibers by using electrospinning process. The core-shell structure nanofibers have been electrospun from the homogeneous solution of BSA (as shell) and PVA (as core). The morphology, chemical compositions, structure and thermal properties of the resultant products were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) techniques. The blending ratio of PVA and BSA, molecular weight of BSA and the applied voltage of electrospinning process were observed to be the key influence factors on the formation of core-shell nanofibers structure. Based on the experimental findings, we proposed a possible physical mechanism for the formation of core-shell nanofibers structure of PVA blended BSA composite.     

Carbon nanotube reinforced Bombyx mori silk nanofibers by the electrospinning process

Nanocomposite fibers of Bombyx mori silk and single wall carbon nanotubes (SWNT) were produced by the electrospinning process. Regenerated silk fibroin dissolved in a dispersion of carbon nanotubes in formic acid was electrospun into nanofibers. The morphology, structure, and mechanical properties of the electrospun nanofibers were examined by field emission environmental scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and microtensile testing. TEM of the reinforced fibers shows that the single wall carbon nanotubes are embedded in the fibers. The mechanical properties of the SWNT reinforced fiber show an increase in Young's modulus up to 460% in comparison with the un-reinforced aligned fiber, but at the expense of the strength and strain to failure.     

Electrospun Ultrafine Fibers from Black Bean Protein Concentrates and Polyvinyl Alcohol

In this study, ultrafine fibers were produced from black bean protein concentrates (BPCs) and polyvinyl alcohol (PVA) by electrospinning. The BPC was denatured under acidic (pH 2) or basic (pH 11) conditions. Polymer solutions containing different PVA concentrations (11% or 21%, w/v) and different BPC: PVA ratios (50:50 or 75:25, v/v) were used for fiber production. The electrical conductivity and rheological properties of the fiber-forming solutions were evaluated, as well as the morphology, size distribution, infrared spectrum, and thermal properties of the electrospun fibers. The fibers showed a homogeneous morphology and diameters ranging from 115 to 541 nm. Fibers from the solution containing BPC denatured at pH 11, 11% PVA, and 75:25 (v/v) BPC: PVA presented the lowest diameter, and those from BPC denatured at pH 2 had less beads than the fibers obtained from BPC denatured at pH 11. The solution formulation affected the thermal properties of the fibers, with weight loss increases ranging from 39.0% to 60.9%. The polymeric solutions containing PVA and BPC (whether denatured under basic or acidic conditions) resulted in ultrafine electrospun fibers with highly favorable characteristics that could potentially be used for the encapsulation of bioactive compounds and food applications.

     

Electrospun nano-fiber mats containing cationic cellulose derivatives and poly (vinyl alcohol) with antibacterial activity

Nano-fibrous mats have been successfully prepared by electrospinning of the blend solutions of cationic cellulose derivatives (PQ-4) and polyvinyl alcohol (PVA). Effects of the blending ratio and applied voltage on the morphology and diameter of the electrospun nano-fibers were investigated. The average diameter of the PQ-4/PVA blend fibers was in the range of 150–250 nm. The electrospinning process became instable and the fiber diameter distribution broadened with increasing PQ-4 content and applied voltage. The antibacterial activity of electrospun PQ-4/PVA blend mats against Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus indicated potential for biomedical use.     

Biomimetic growth of hydroxyapatite on phosphorylated electrospun cellulose nanofibers

In biomimicking the formation of collagen fiber/hydroxyapatite (HAp) in natural bone, electrospun cellulose nanofiber (CelluNF)/HAp composites were synthesized in simulated body fluid (SBF). Their morphology and structure were characterized by SEM, TEM, XRD and XPS. CelluNFs showed low bioactivity in inducing the growth of HAp. In order to improve this ability, CelluNFs were slightly phosphorylated with a degree of substitution of phosphate group of 0.28. The modified CelluNFs were highly effective in guiding the HAp growth along the fibers. The HAp crystal size in the composites was ca. 24 nm, and the lattice spacing of (2 1 1) plane was 2.83 Å. It was found that the HAps in the composites were calcium deficient. The CelluNF/HAp composites are highly porous materials with micro-, meso-, and macro-pores. A mechanism for the HAp growth on CelluNFs was presented. Such CelluNF/HAp composites can be potentially useful in the field of bone tissue engineering.     

Lignin-based electrospun nanofibers reinforced with cellulose nanocrystals

Lignin-based fibers were produced by electrospinning aqueous dispersions of lignin, poly(vinyl alcohol) (PVA), and cellulose nanocrystals (CNCs). Defect-free nanofibers with up to 90 wt % lignin and 15% CNCs were achieved. The properties of the aqueous dispersions, including viscosity, electrical conductivity, and surface tension, were examined and correlated to the electrospinnability and resulting morphology of the composite fibers. A ternary lignin-PVA-water phase diagram was constructed as a tool to rationalize the effect of mixing ratios on the dispersion electrospinability and morphology of the resulting fibers. The influence of reinforcing CNCs on the thermal properties of the multicomponent fibers was investigated by using thermal gravimetric analysis and differential scanning calorimetry. The thermal stability of the system was observed to increase owing to a strong interaction of the lignin-PVA matrix with the dispersed CNCs, mainly via hydrogen bonding, as observed in Fourier transform infrared spectroscopy experiments.     

Morphology and structure of electrospun mats from regenerated silk fibroin aqueous solutions with adjusting pH

In this paper, regenerated silk fibroin (SF) aqueous solutions were adjusted to a pH of 6.9 by mimicing the condition in the posterior division of silkworm's gland and rheological behavior of solutions was investigated. The electrospinning technique was used to prepare fibers, and non-woven mats of regenerated B. mori silk fibroin were successfully obtained. The effects of electrospinning parameters on the morphology and diameter of regenerated silk fibers were investigated by orthogonal design. Statistical analysis showed that voltage, the concentration of regenerated SF solutions and the distance between tip and collection plate were the most dominant parameters to fiber morphology, diameter and diameter distribution, respectively. An optimal electrospinning condition was obtained in producing uniform cylindrical fibers with an average diameter of 1300nm. It was as follows: the concentration 30%, voltage 40kV, distance 20cm. The structure of electrospun mats was characterized by Raman spectroscopy (RS), wide-angle X-ray diffraction (WAXD) and modulated differential scanning calorimetry (MDSC). It was found that electrospun mats were predominantly random coil/silk I structure, and the transition to silk II (beta-sheet) rich structure should be further explored.     

Preparation and Evaluation of Electrospun Zein/HA Fibers Based on Two Methods of Adding HA Nanoparticles

Zein/HA fibrous membranes were successfully prepared by electrospinning the zein/HA solution mixed by magnetic stirrer （Method I） or ultrasonic power （Method Ⅱ）. The morphology of zeirdHA nanocomposite fibers and the distribution of HA within the fibers electrospun by two methods were researched by Scanning Electron Microscopy （SEM） and Energy-dispersive X-ray spectroscopy （EDX）. In Method I, the distribution of HA nanoparticles is not homogeneous and HA particles tend to agglom- erate. The relatively homogeneous HA distribution can be observed in the membranes electrospun by Method Ⅱ. Using mag- netic stirrer to prepare the electrospinning solution improves the wettability of zein/HA membranes. From the viewpoint of application, electrospun zein/HA membranes fabricated by the solution mixed via Methods I and II both possessed reasonable tensile strength and elongation at break for both handling and sterilization. Considering two aspects of strength and elongation, electrospun zein/HA membranes fabricated by Method I are more balanced than those fabricated by Method Ⅱ. Biological performances of the control zein and zein/HA membranes were assessed by in vitro culture of hMSCs. Results show that both types of the membranes can support cell proliferation. The cells cultured on the zein/HA membranes electrospun by Method I with 5 wt% HA （on weight ofzein） show significantly higher proliferation than those cultured on the control zein membranes on the seventh day. The electrospun zein/HA fibrous membranes show promises for bone tissue engineering applications.     

PHBV‐TiO2 mats prepared by electrospinning technique: Physico‐chemical properties and cytocompatibility

One of the most important challenges in tissue engineering research is the development of biomimetic materials. In this present study, we have investigated the effect of the titanium dioxide (TiO₂) nanoparticles on the properties of electrospun mats of poly (hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), to be used as scaffold. The morphology of electrospun fibers was observed by scanning electron microscopy (SEM). Both pure PHBV and nanocomposites fibers were smooth and uniform. However, there was an increase in fiber diameter with the increase of TiO₂ concentration. Thermal properties of PHBV and nanocomposite mats were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC analysis showed that the crystallization temperature for PHBV shifts to higher temperature in the presence of the nanoparticles, indicating that TiO₂ nanoparticles change the process of crystallization of PHBV due to heterogeneous nucleation effect. TGA showed that in the presence of the nanoparticles, the curves are shifted to lower temperatures indicating a decreasing in thermal stability of nanocomposites compared to pure PHBV. To produce scaffolds for tissue engineering, it is important to evaluate the biocompatibility of the material. Cytotoxicity assay showed that TiO₂ nanoparticles were not cytotoxic for cells at the concentration used to synthesize the mats. The proliferation of cells on the mats was evaluated by the MTT assay. Results showed that the nanocomposite samples increased cell proliferation compared to the pure PHBV. These results indicate that continuous electrospun fibrous scaffolds may be a good substrate for tissue regeneration.     

Electrospinning of poly(vinyl alcohol)-water-soluble quaternized chitosan derivative blend

Defect free mats containing a cationic polysaccharide, chitosan derivative such as N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (HTCC), have been prepared using electrospinning of an aqueous solution of poly(vinyl alcohol) (PVA)-HTCC blends. HTCC, a water-soluble derivative of chitosan, was synthesized via the reaction between glycidyl-trimethylammonium chloride and chitosan. Solutions of PVA-HTCC Blends were electrospun. The morphology, diameter and structure of the produced electrospun nanofibres were examined by scanning electron microscopy (SEM). The average fibre diameter was in the range of 200-600 nm. SEM images showed that the morphology and diameter of the nanofibres were mainly affected by weight ratio of the blend and applied voltage. The results revealed that increasing HTCC content in the blends decreases the average fibre diameter. These observations were discussed on the basis of shear viscosities and conductivities of the spinning solutions. Microbiological assessment showed that the PVA-HTCC mats have a good antibacterial activity against Gram-positive bacteria, Staphylococcus aureus, and Gram-negative bacteria, Escherichia coli.     

Antibacterial Activity and Inhibition of Adherence of Streptococcus mutans by Propolis Electrospun Fibers

Mouth-dissolving fibers with antibacterial activity for the oral cavity were prepared by an electrospinning technique. Propolis extract was used as an active ingredient and polyvinylpyrrolidone (PVP) K90 as the polymer matrix. The morphology and diameter of the fibers were characterized by scanning electron microscopy. Antibacterial activity against Streptococcus mutans and the inhibition of S. mutans adhesion on a smooth glass surface during the biofilm formation were tested. Propolis, 5% (w/v), was combined with a PVP K90 solution, 8% (w/v), with or without Tween 80 including flavor additives and electrospun with an applied voltage of 15 kV. Uniform and smooth fibers of propolis-PVP K90 were obtained. The results showed that electrospun fibers with propolis extract can dissolve and release the propolis in water. Propolis-PVP electrospun fibers showed better antibacterial activity by reduction of bacteria adhesion on a smooth glass surface when compared to some commercial mouthwash products. These results indicated the potential of electrospun fibers to be used as mouth-dissolving fibers for effective antibacterial activity in the oral cavity.KEY WORDS: antibacterial activity, electrospun fibers, inhibition of adherence, propolis, Streptococcus mutans     

Electrospun poly(lactic acid)/chitosan core-shell structure nanofibers from homogeneous solution

The core-shell structure nanofibers of poly(lactic acid)/chitosan with different weight ratios were successfully electrospun from homogeneous solution. The preparation process was more simple and effective than double-needle electrospinning. The nanofibers were obtained with chitosan in shell while poly(lactic acid) in core attributing to phase separation, which were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). The electrospun nanofibrous membrane was evaluated in vitro by using mouse fibroblasts (L929) as reference cell lines. Cell culture results indicated that these materials were good in promoting cell growth and attachment, thus they could be used for tissue engineering and wound healing dressing.     

Extraction and characterization of biocompatible hydroxyapatite from fresh water fish scales for tissue engineering scaffold

In bone tissue engineering, porous hydroxyapatite (HAp) is used as filling material for bone defects, augmentation, artificial bone graft and scaffold material. The present paper compares the preparation and characterization of HAp from fish scale (FS) and synthetic body fluid (SBF) solution. Thermo gravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and particle size analysis of the samples have been performed. The analysis indicates that synthesized HAp consists of sub-micron HAp particle with Ca/P ratio corresponding to FS and SBF 1.62 and 1.71, respectively. MTT assay and quantitative DNA analysis show growth and proliferation of cells over the HA scaffold with the increase in time. The shape and size (morphology) of mesenchymal stem cells after 3 days show a transition from rounded shape to elongated and flattened shape expressing its spreading behavior. These results confirm that HAp bio-materials from fish scale are physico-chemically and biologically equivalent to the chemically synthesized HAp from SBF. Biological HAp, thus, possesses a great potential for conversion of industrial by-product into highly valuable compounds using simple effective and novel processes.     

Three-dimensional fibrous PLGA/HAp composite scaffold for BMP-2 delivery

A protein loaded three-dimensional scaffold can be used for protein delivery and bone tissue regeneration. The main objective of this project was to develop recombinant human bone morphogenetic protein-2 (rhBMP-2) loaded poly(D,L-lactide-co-glycolide)/hydroxylapatite (PLGA/HAp) composite fibrous scaffolds through a promising fabrication technique, electrospinning. In vitro release of BMP-2 from these scaffolds, and the attachment ability and viability of marrow derived messenchymal stem cells (MSCs) in the presence of the scaffolds were investigated. The PLGA/HAp composite scaffolds developed in this study exhibit good morphology and it was observed that HAp nanoparticles were homogeneously dispersed inside PLGA matrix within the scaffold. The composite scaffolds allowed sustained (2-8 weeks) release of BMP-2 whose release rate was accelerated with increasing HAp content. It was also shown that BMP-2 protein successfully maintained its integrity and natural conformations after undergoing the process of electrospinning. Cell culture experiments showed that the encapsulation of HAp could enhance cell attachment to scaffolds and lower cytotoxicity.     

Optimized bone regeneration based on sustained release from three-dimensional fibrous PLGA/HAp composite scaffolds loaded with BMP-2

Contemporary treatment of critical bone defect remains a significant challenge in the field of orthopedic surgery. Engineered biomaterials combined with growth factors have emerged as a new treatment alternative in bone repair and regeneration. Our approach is to encapsulate bone morphogenetic protein-2 (BMP-2) into a polymeric matrix in different ways and characterize their individual performance in a nude mouse model. The main objective of this study is to examine whether the PLGA/HAp composite fibrous scaffolds loaded with BMP-2 through electrospinning can improve bone regeneration. The hypothesis is that different loading methods of BMP-2 and different HAp contents in scaffolds can alternate the release profiles of BMP-2 in vivo, therefore modify the performance of scaffolds in bone regeneration. Firstly, mechanical strength of scaffolds and HAp nanoparticles distribution in scaffolds were investigated. Secondly, nude mice experiments extended to 6 weeks were carried out to test the in vivo performance of these scaffolds, in which measurements, like serum BMP-2 concentration, ALP activity, X-ray qualification, and H&E/IHC tissue staining were utilized to monitor the growth of new bone and the changes of the corresponding biochemical parameters. The results showed that the PLGA/HAp composite scaffolds developed in this study exhibited good morphology/mechanical strength and HAp nanoparticles were homogeneously dispersed inside PLGA matrix. Results from the animal experiments indicate that the bioactivity of BMP-2 released from the fibrous PLGA/HAp composite scaffolds is well maintained, which further improves the formation of new bone and the healing of segmental defects in vivo. It is concluded that BMP-2 loaded PLGA/HAp composite scaffolds are promising for bone healing.     

Electrospinning of Cross-Linked Magnetic Chitosan Nanofibers for Protein Release

A poly(vinylalcohol) (PVA) electrospun/magnetic/chitosan nanocomposite fibrous cross-linked network was fabricated using in situ cross-linking electrospinning technique and used for bovine serum albumin (BSA) loading and release applications. Sodium tripolyphosphate (TPP) and glutaraldehyde (GA) were used as cross-linkers which modified magnetic-Fe₃O₄ chitosan as Fe₃O_4/CS/TPP and Fe₃O_4/CS/GA, respectively. BSA was used as a model protein drugs which was encapsulated to form Fe₃O₄/CS/TPP/BSA and Fe₃O₄/CS/GA/BSA nanoparticles. The composites were electrospun with PVA to form nanofibers. Nanofibers were characterized by field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The characterization results suggest that Fe₃O₄ nanoparticles with average size of 45 nm were successfully bound on the surface of chitosan. The cross-linked nanofibers were found to contain uniformly dispersed Fe₃O₄ nanoparticles. The size and morphology of the nanofibers network was controlled by varying the cross-linker type. FTIR data show that these two polymers have intermolecular interactions. The sample with TPP cross-linker showed an enhancement of the controlled release properties of BSA during 30-h experimental investigation.

Graphical Abstract

Open in a separate windowᅟKEY WORDS: cross-linker, electrospun, magnetite, mano-composite, protein loading     

Poly(vinyl alcohol) nanofibers by electrospinning as a protein delivery system and the retardation of enzyme release by additional polymer coatings

Protein-loaded (bovine serum albumin (BSA) or luciferase) poly(vinyl alcohol) (PVA) nanofibers were obtained by electrospinning. Poly(p-xylylene) (PPX, also coined as parylene) coated PVA/BSA nanofibers were prepared by chemical vapor deposition (CVD). The release of BSA from PVA nanofibers under physiological conditions was monitored by absorption spectroscopy. Burst release of BSA was noted with uncoated PVA nanofibers. In contrast, PPX-coated nanofibers exhibited a significantly retarded release of BSA depending on the coating thickness of PPX (ranging from 40 to 300 nm). Luciferase was used here as model enzyme, which after electrospinning retained its enzyme activity. This preservation of enzyme activity and the continuous release of the intact enzyme from the immersed fibers meets a fundamental prerequisite for the application of enzymes or other sensitive agents released from electrospun nanofibers under physiological conditions.     

Coating electrospun collagen and gelatin fibers with perlecan domain I for increased growth factor binding

Electrospun natural polymer membranes were fabricated from collagen or gelatin coated with a bioactive recombinant fragment of perlecan, a natural heparan sulfate proteoglycan. The electrospinning process allowed the facile processing of a three-dimensional, porous fibril (2-6 microm in diameter) matrix suitable for tissue engineering. Laser scanning confocal microscopy revealed that osteoblast-like MG63 cells infiltrated the depth of the electrospun membrane evenly without visible apoptosis. Tissue engineering scaffolds ideally mimic the extracellular matrix; therefore, the electrospun membrane must contain both structural and functional matrix features. Fibers were coated, after processing, with perlecan domain I (PlnDI) to improve binding of basic fibroblast growth factor (FGF-2), which binds to native heparan sulfate chains on PlnDI. PlnDI-coated electrospun collagen fibers were ten times more effective than heparin-BSA collagen fibers at binding FGF-2. Because FGF-2 modulates cell growth, differentiation, migration and survival, the ability to effectively bind FGF-2 to an electrospun matrix is a key improvement in creating a successful tissue engineering scaffold.