Three-dimensional motion of the upper extremity joints during various activities of daily living

Highly reliable information on the range of motion (ROM) required to perform activities of daily living (ADL) is important to allow rehabilitation professionals to make appropriate clinical judgments of patients with limited ROM of the upper extremity joints. There are, however, no data available that take full account of corrections for gimbal-lock and soft tissue artifacts, which affect estimation errors for joint angles. We used an electromagnetic three-dimensional tracking system (FASTRAK) to measure the three-dimensional ROM of the upper extremity joints of healthy adults (N=20, age range 18–34) during 16 ADL movement tasks. The ROM required for the performance of each movement was shown in terms of the joint angle at the completion of the task, using a new definition of joint angle and regression analysis to compensate for estimation errors. The results of this study may be useful in setting goals for the treatment of upper extremity joint function.     

Computation of the kinematics and the minimum peak joint moments of sit-to-stand movements

Background  

A sit-to-stand (STS) movement requires muscle strength higher than that of other daily activities. There are many elderly people, who experience difficulty when standing up from a chair. The muscle strength required (or the load on the joints) during a STS task is determined by the kinematics (movement pattern). The purpose of this study was to evaluate the kinematics and resultant joint moments of people standing up from a chair in order to determine the minimum peak joint moments required for a STS task.     

Paired nonlinear behavior of active and passive joint torques associated with preparation for walk-to-run gait transition

This study investigated the lower extremity torque's active and passive features during the walk-to-run gait transition with continuously increased walking speed. Fourteen volunteers participated in the experiment. Kinematic and kinetic data were collected synchronously. Five strides leading up the gait transition were examined. Peaks of the passive (e.g., contact) and active (e.g., generalized muscle torques), along with net joint torque, and time to peak torques exhibited significant differences at the last stride before gait transition, compared to the first four strides, at the ankle, knee, and hip joints, respectively. Selected peak joint active and passive torques showed significant and opposite trends at critical events within a stride cycle: such ankle joint right after heel-contact, knee joint during weight acceptance, and both hip and knee joints right before toe-off. The magnitude and the corresponding time to active and passive peak torque changed in a nonlinear pattern before the transition from walk to run. The lower extremity segment-interaction during gait transition appeared to be an active reorganization exemplified by the interaction between the lower extremity's active and passive torque components.     

Kinematic Analysis of the Neck and Upper Extremities During Walking in Healthy Young Adults

The objective of this paper is to quantify the local stabilities of the neck and upper extremities (right/left shoulders and right/left elbows), and investigate differences between linear and nonlinear measurements of the associated joint motions and differences in the local stability between the upper and lower extremities. This attempt involves the calculation of a nonlinear parameter, Lyapunov Exponent (LE), and a linear parameter, Range of Motion (ROM), during treadmill walking in conjunction with a large population of healthy subjects. Joint motions of subjects were captured using a three-dimensional motion-capture system. Then mathematical chaos theory and the Rosenstein algorithm were employed to calculate LE of joints as the extent of logarithmic divergence between the neighboring state-space trajectories of flexion-extension angles. LEs computed over twenty males and twenty females were 0.037±0.023 for the neck, 0.043±0.021 for the right shoulder, 0.045±0.030 for the left shoulder, 0.032±0.021 for the right elbow, and 0.034±0.026 for the left elbow. Although statistically significant difference in the ROM was observed between all pairs of the neck and upper extremity joints, differences in the LE between all pairs of the joints as well as between males and females were not statistically significant. Between the upper and lower extremities, LEs of the neck, shoulder, and elbow were significantly smaller than those of the hip (∼0.064) and the knee (∼0.062). These results indicate that a statistical difference in the local stability between the upper extremity joints is not significant. However, the different result between the ROM and LE gives a strong rationale for applying both linear and nonlinear tools together to the evaluation of joint movement. The LEs of the joints calculated from a large population of healthy subjects could provide normative values for the associated joints and can be used to evaluate the recovery progress of patients with joint related diseases.     

The relations between morphology, asymmetry of mutual articular facets, and range of movement, in the human hand joints

Surface area measurements were performed on the articular facets in the human hand joints in order to calculate the area-asymmetry (incongruency) between mutual articular facets in every one of the hand joints, and to learn about the relations between the asymmetry in the joint, the joint's morphology, and the range of movement exhibited by it. Several different trials have led to the conclusion that the asymmetry in a joint is strongly influenced by its morphological type (plane; sellar; condyloid; bicondylar). No such correlation was found between the asymmetry in a joint and its characteristic range of movement. The results contradict the intuitive assumption that the greater the incongruency in a joint, the wider the movement it can perform.     

Biomechanical analysis of the relation between movement time and joint moment development during a sit-to-stand task

Background  

Slowness of movement is a factor that may cause a decrease of quality of daily life. Mobility in the elderly and people with movement impairments may be improved by increasing the quickness of fundamental locomotor tasks. Because it has not been revealed how much muscle strength is required to improve quickness, the purpose of this study was to reveal the relation between movement time and the required muscle strength in a sit to stand (STS) task. Previous research found that the sum of the peak hip and knee joint moments was relatively invariant throughout a range of movement patterns (Yoshioka et al., 2007, Biomedical Engineering Online 6:26). The sum of the peak hip and knee joint moment is an appropriate index to evaluate the muscle strength required for an STS task, since the effect of the movement pattern variation can be reduced, that is, the results can be evaluated purely from the viewpoint of the movement times. Therefore, the sum of the peak hip and knee joint moment was used as the index to indicate the required muscle strength.     

Translational and rotational joint power terms in a six degree-of-freedom model of the normal ankle complex

We hypothesized that defining joint power (JP) merely on the basis of joint rotations ignores important translational power terms, and may not adequately represent the energy flow profile for a given muscle group. A novel six degree-of-freedom (6 DOF) model of the ankle complex was implemented, accounting for previously ignored joint translations as well as traditional rotations. Foot and shank kinematic and kinetic data were collected over a stride cycle on five male and five female adults, walking five trials each at 0.69 statures s⁻¹. During intra-subject analyses, ensemble averages were calculated (n=5) for JP associated with each DOF, and for related velocity and force/moment data. Translational joint velocities typically peaked below 10% of the mean walking velocity. The largest peak in JP occurred for the rotational DOF associated with dorsi/planter flexion (360 W). The next largest peak in JP was for the vertical translational DOF, and was nearly 10% of the predominant peak. Positive work during push-off was significantly less p≤0.05) for the 6 DOF model (27.9 J) than for either 1 or 3 DOF rotational models (30.3 and 29.9 J, respectively). Negative work during early stance was significantly less for the 6 DOF model (−10.3 J) than for either the 1 or 3 DOF models (−13.1 and −12.6 J, respectively). Inter-subject analyses (n=50) were conducted for JP data only, with similar results. We conclude that translational JP terms are of practical importance in mechanical energy studies, and may be of particular concern when evaluating energy storing prostheses, when summing total power at several joints, and when studying pathologies that disturb joint geometry.     

Effect of landing height on frontal plane kinematics, kinetics and energy dissipation at lower extremity joints

Lack of the necessary magnitude of energy dissipation by lower extremity joint muscles may be implicated in elevated impact stresses present during landing from greater heights. These increased stresses are experienced by supporting tissues like cartilage, ligaments and bones, thus aggravating injury risk. This study sought to investigate frontal plane kinematics, kinetics and energetics of lower extremity joints during landing from different heights. Eighteen male recreational athletes were instructed to perform drop-landing tasks from 0.3- to 0.6-m heights. Force plates and motion-capture system were used to capture ground reaction force and kinematics data, respectively. Joint moment was calculated using inverse dynamics. Joint power was computed as a product of joint moment and angular velocity. Work was defined as joint power integrated over time. Hip and knee joints delivered significantly greater joint power and eccentric work (p<0.05) than the ankle joint at both landing heights. Substantial increase (p<0.05) in eccentric work was noted at the hip joint in response to increasing landing height. Knee and hip joints acted as key contributors to total energy dissipation in the frontal plane with increase in peak ground reaction force (GRF). The hip joint was the top contributor to energy absorption, which indicated a hip-dominant strategy in the frontal plane in response to peak GRF during landing. Future studies should investigate joint motions that can maximize energy dissipation or reduce the need for energy dissipation in the frontal plane at the various joints, and to evaluate their effects on the attenuation of lower extremity injury risk during landing.     

Interhemispheric Interaction during Memorization of Movement Rhythm

After memorizing a simple periodical movement in the ankle joint, 36 healthy subjects (right-handers) reproduced it from memory. The movement rhythm image that formed during movement in the left ankle joint was memorized better than when the movement was performed by the right extremity. The specific features of interhemispheric interaction at various stages of trace processes, unequal participation of the hemispheres in perception and processing of information, and the physiological expedience of the signal transmission from the right to the left hemisphere are sufficient to assume a basic sequence of hemispheric functional activity redistribution when the brain masters new cognitive actions.     

A musculoskeletal model of the human lower extremity: the effect of muscle, tendon, and moment arm on the moment-angle relationship of musculotendon actuators at the hip, knee, and ankle

We have developed a musculoskeletal model of the human lower extremity for computer simulation studies of musculotendon function and muscle coordination during movement. This model incorporates the salient features of muscle and tendon, specifies the musculoskeletal geometry and musculotendon parameters of 18 musculotendon actuators, and defines the active isometric moment of these actuators about the hip, knee, and ankle joints in the sagittal plane. We found that tendon slack length, optimal muscle-fiber length, and moment arm are different for each actuator, thus each actuator develops peak isometric moment at a different joint angle. The joint angle where an actuator produces peak moment does not necessarily coincide with the joint angle where: (1) muscle force peaks, (2) moment arm peaks, or (3) the in vivo moment developed by maximum voluntary contractions peaks. We conclude that when tendon is neglected in analyses of musculotendon force or moment about joints, erroneous predictions of human musculotendon function may be stated, not only in static situations as studied here, but during movement as well.     

Mechanical energy expenditure on human movement and the anthropomorphic mechanism]

Mechanical energy expenditures of the man and anthropomorphic locomotion machine during movement are compared theoretically. Sources of the mechanical energy affecting movement of human's lower extremity are modelled by 8 muscles, 3 of which are the two-joint muscles. The model of the lower extremity of anthropomorphic locomotion machine is moved by joint moments. It was shown that in the same movement the model of the human lower extremity can spend less mechanical energy than that of the model of the anthropomorphic locomotion machine. It is caused by the presence of two-joint muscles in the first model. Such an economy of mechanical energy expenditures realized by the two-joint muscle is possible at simultaneous execution of three conditions: 1) signs of the muscle powers, which are produced by that muscle at both joints, are opposite; 2) moments produced by that muscle at each of both joints have the same direction with the joint moments at these joints; 3) one-joint antagonistic muscles are not active. An expression which makes it possible to estimate the mechanical energy savings by the two-joint muscles during humans' movement was developed.     

Functional Asymmetry at Evaluation of Movement Trajectory of the Solid Sound Image in Human

At studying localization by human of moving solid sound image (SSI) under conditions of dichotic stimulation, an asymmetry has been revealed in evaluation of a shift of the initial and final points of the opposite SSI movement under mirror-symmetry conditions of stimulation. The shift to the right in all cases exceeds that to the left (by 3.4–32.1 degrees). The most pronounced asymmetry is observed at the initial moment of the SSI movement at the synergism of interaural differences in stimulation by its time and intensity; under these conditions, the trajectory of the SSI movement to the left turns out to be about 1.8 times longer than the movement to the right. Possible neurophysiological mechanisms of the obtained results are considered.     

The effects of sloped surfaces on locomotion: backward walking as a perturbation

The purpose of this study was to examine lower extremity kinetics and muscle activity during backward slope walking to clarify the relationship between joint moments and powers and muscle activity patterns observed in forward slope walking. Nine healthy volunteers walked backward on an instrumented ramp at three grades (-39% (-21 degrees ), 0% (level), +39% (+21 degrees )). EMG activity was recorded from major lower extremity muscles. Joint kinetics were obtained from kinematic and force platform data. The knee joint moment and power generation increased significantly during upslope walking; hip joint moment and power absorption increased significantly during downslope walking. When compared to data from forward slope walking, these backward walking data suggest that power requirements of a task dictate the muscle activity pattern needed to accomplish that movement. During downslope walking tasks, power absorption increased and changes in muscle activity patterns were directly related to the changes in the joint moment patterns. In contrast, during upslope walking tasks, power generation increased and changes in the muscle activity were related to the changes in the joint moments only at the 'primary' joint; at adjacent joints the changes in muscle activity were unrelated to the joint moment pattern. The 'paradoxical' changes in the muscle activity at the adjacent joints are possibly related to the activation of biarticular muscles required by the increased power generation at the primary joint. In total, these data suggest that changing power requirements at a joint impact the control of muscle activity at that and adjacent joints.     

Increased hip adductor activation during sit-to-stand improves muscle activation timing and rising-up mechanics in individuals with hemiparesis

Long sit-to-stand (STS) time has been identified as a feature of impaired functional mobility. The changes in biomechanics of STS performance with simultaneous hip adductor contraction have not been studied, which may limit indications for use of hip adductor activation during STS training.Ten individuals with hemiplegia (mean age 61.8 years, injury time 29.8 ± 15.2 months) performed the STS with and without squeezing a ball between two legs. The joint moments, ground reaction force (GRF), chair reaction force and movement durations and temporal index of electromyography were calculated from the control condition for comparison with those from the ball squeezing condition.Under the squeeze condition, reduced peak vertical GRF during the ascension phase with increased loading rate was observed in the nonparetic limb, and the peak knee extensor moment occurred earlier in the paretic. Earlier activation of tibialis anterior and gluteus maximus, and gluteus medius were found in squeeze STS.Squeezing a ball between limbs during STS increased the contraction timing of tibialis anterior, gluteus maximus, gluteus medius, and soleus as well as a more symmetric rising mechanics encourage the use of squeezing a ball between limbs during STS for individuals with hemiparesis.     

Gait synchronized force modulation during the stance period of one limb achieved by an active partial body weight support system

Our purpose was to demonstrate the ability of an actively controlled partial body weight support (PBWS) system to provide gait synchronized support during the stance period of a single lower extremity while examining the affect of such a support condition on gait asymmetry. Using an instrumented treadmill and a motion capture system, we compared gait parameters of twelve healthy elderly subjects (age 65-80 years) during unsupported walking to those while walking with 20% body weight support provided during only the stance period of the right limb. Specifically, we examined peak three-dimensional ground reaction force (GRF) data and the symmetry of lower extremity sagittal plane joint angles and of time and distance parameters. A reduction in all three GRF components was observed for the supported limb during modulated support. Reductions observed in the vertical GRF were comparable to the desired 20% support level. Additionally, GRF components examined for the unsupported limb during modulated support were consistently similar to those measured during unsupported walking. Modulated support caused statistically significant increases in asymmetry for knee flexion during stance (increased 5.9%), hip flexion during late swing (increased 9.1%), and the duration of single limb support (increased 2.8%). However, the observed increases were similar or considerably less than the natural variability in the asymmetry of these parameters during unsupported walking. The ability of the active PBWS device to provide unilateral support may offer new and possibly improved applications of PBWS rehabilitation for patients with unilateral walking deficits such as hemiparesis or orthopaedic injury.     

Bilateral differences in the net joint torques during the squat exercise

Bilateral movements are common in human movement, both as exercises and as daily activities. Because the movement patterns are similar, it is often assumed that there are no bilateral differences (BDs; differences between the left and right sides) in the joint torques that are producing these movements. The aim of this investigation was to test the assumption that the joint torques are equal between the left and right lower extremities by quantifying BDs during the barbell squat. Eighteen recreationally trained men (n = 9) and women (n = 9) completed 3 sets of 3 repetitions of the squat exercise, under 4 loading conditions: 25, 50, 75, and 100% of their 3 repetition maximum, while instrumented for biomechanical analysis. The average net joint moment (ANJM) and maximum flexion angle (MFA) for the hip, knee, and ankle as well as the average vertical ground reaction force (AVGRF) and the average distance from the ankle joint center to the center of pressure (ADCOP) were calculated. Group mean and individual data were analyzed (alpha = 0.05). At each joint, there was a significant main effect for side and load, no main effect for gender, with few significant interactions. The hip ANJM was 12.4% larger on the left side, the knee ANJM was 13.2% larger on the right side, and the ankle ANJM was 16.8% larger on the left side. Differences in MFAs between sides were less than 2 degrees for all 3 joints (all p > 0.20 except for the knee at 75% [p = 0.024] and 100% [p = 0.025]), but the AVGRF and the ADCOP were 6% and 11% larger on the left side. Few subjects exhibited the pattern identified with the group mean data, and no subject exhibited nonsignificant BDs for all 3 joints. These findings suggest that joint torques should not be assumed to be equal during the squat and that few individual subjects follow the pattern exhibited by group mean data.     

Feedback control from the jaw joints during biting: An investigation of the reptile Sphenodon using multibody modelling

Sphenodon, a lizard-like reptile, is the only living representative of a group that was once widespread at the time of the dinosaurs. Unique jaw mechanics incorporate crushing and shearing motions to breakdown food, but during this process excessive loading could cause damage to the jaw joints and teeth. In mammals like ourselves, feedback from mechanoreceptors within the periodontal ligament surrounding the teeth is thought to modulate muscle activity and thereby minimise such damage. However, Sphenodon and many other tetrapods lack the periodontal ligament and must rely on alternative control mechanisms during biting. Here we assess whether mechanoreceptors in the jaw joints could provide feedback to control muscle activity levels during biting. We investigate the relationship between joint, bite, and muscle forces using a multibody computer model of the skull and neck of Sphenodon. When feedback from the jaw joints is included in the model, predictions agree well with experimental studies, where the activity of the balancing side muscles reduces to maintain equal and minimal joint forces. When necessary, higher, but asymmetric, joint forces associated with higher bite forces were achievable, but these are likely to occur infrequently during normal food processing. Under maximum bite forces associated with symmetric maximal muscle activation, peak balancing side joint forces were more than double those of the working side. These findings are consistent with the hypothesis that feedback similar to that used in the simulation is present in Sphenodon.     

Kinematic performance of a six degree-of-freedom hand model (6DHand) for use in occupational biomechanics

Upper extremity musculoskeletal disorders represent an important health issue across all industry sectors; as such, the need exists to develop models of the hand that provide comprehensive biomechanics during occupational tasks. Previous optical motion capture studies used a single marker on the dorsal aspect of finger joints, allowing calculation of one and two degree-of-freedom (DOF) joint angles; additional algorithms were needed to define joint centers and the palmar surface of fingers. We developed a 6DOF model (6DHand) to obtain unconstrained kinematics of finger segments, modeled as frusta of right circular cones that approximate the palmar surface. To evaluate kinematic performance, twenty subjects gripped a cylindrical handle as a surrogate for a powered hand tool. We hypothesized that accessory motions (metacarpophalangeal pronation/supination; proximal and distal interphalangeal radial/ulnar deviation and pronation/supination; all joint translations) would be small (less than 5° rotations, less than 2mm translations) if segment anatomical reference frames were aligned correctly, and skin movement artifacts were negligible. For the gripping task, 93 of 112 accessory motions were small by our definition, suggesting this 6DOF approach appropriately models joints of the fingers. Metacarpophalangeal supination was larger than expected (approximately 10°), and may be adjusted through local reference frame optimization procedures previously developed for knee kinematics in gait analysis. Proximal translations at the metacarpophalangeal joints (approximately 10mm) were explained by skin movement across the metacarpals, but would not corrupt inverse dynamics calculated for the phalanges. We assessed performance in this study; a more rigorous validation would likely require medical imaging.