Retained structural integrity of collagen and elastin within cryopreserved human heart valve tissue as detected by two-photon laser scanning confocal microscopy

Cryopreservation is commonly used for the long-term storage of heart valve allografts. Despite the excellent hemodynamic performance and durability of cryopreserved allografts, reports have questioned whether cryopreservation affects the valvular structural proteins, collagen and elastin. This study uses two-photon laser scanning confocal microscopy (LSCM) to evaluate the effect of cryopreservation on collagen and elastin integrity within the leaflet and conduit of aortic and pulmonary human heart valves. To permit pairwise comparisons of fresh and cryopreserved tissue, test valves were bisected longitudinally with one segment imaged fresh and the other imaged after cryopreservation and brief storage in liquid nitrogen. Collagen was detected by second harmonic generation (SHG) stimulation and elastin by autofluorescence excitation. Qualitative analysis of all resultant images indicated the maintenance of collagen and elastin structure within leaflet and conduit post-cryopreservation. Analysis of the optimized percent laser transmission (OPLT) required for full dynamic range imaging of collagen and elastin showed that OPLT observations were highly variable among both fresh and cryopreserved samples. Changes in donor-specific average OPLT in response to cryopreservation exhibited no consistent directional trend. The donor-aggregated results predominantly showed no statistically significant change in collagen and elastin average OPLT due to cryopreservation. Since OPLT has an inverse relationship with structural signal intensity, these results indicate that there was largely no statistical difference in collagen and elastin signal strength between fresh and cryopreserved tissue. Overall, this study indicates that the conventional cryopreservation of human heart valve allografts does not detrimentally affect their collagen and elastin structural integrity.     

High resolution three-dimensional strain mapping of bioprosthetic heart valves using digital image correlation

Transcatheter aortic valve replacement (TAVR) is a safe and effective treatment option for patients deemed at high and intermediate risk for surgical aortic valve replacement. Similar to surgical aortic valves (SAVs), transcatheter aortic valves (TAVs) undergo calcification and mechanical wear over time. However, to date, there have been limited publications on the long-term durability of TAV devices. To assess longevity and mechanical strength of TAVs in comparison to surgical bioprosthetic valves, three-dimensional deformation analysis and strain measurement of the leaflets become an inevitable part of the evaluation. The goal of this study was to measure and compare leaflet displacement and strain of two commonly used TAVs in a side-by-side comparison with a commonly used SAV using a high-resolution digital image correlation (DIC) system. 26-mm Edwards SAPIEN 3, 26-mm Medtronic CoreValve, and 25-mm Carpentier-Edwards PERIMOUNT Magna surgical bioprosthesis were examined in a custom-made valve testing apparatus. A time-varying, spatially uniform pressure was applied to the leaflets at different loading rates. GOM ARAMIS® software was used to map leaflet displacement and strain fields during loading and unloading. High displacement regions were found to be at the leaflet belly region of the three bioprosthetic valves. In addition, the frame of the surgical bioprosthesis was found to be remarkably flexible, in contrary to CoreValve and SAPIEN 3 in which the stent was nearly rigid under a similar loading condition. The experimental DIC measurements can be used to characterize the anisotropic materiel behavior of the bioprosthetic heart valve leaflets and validate heart valve computational simulations.     

Quantitative imaging of fibrotic and morphological changes in liver of non-alcoholic steatohepatitis (NASH) model mice by second harmonic generation (SHG) and auto-fluorescence (AF) imaging using two-photon excitation microscopy (TPEM)

Non-alcoholic steatohepatitis (NASH) is a common liver disorder caused by fatty liver. Because NASH is associated with fibrotic and morphological changes in liver tissue, a direct imaging technique is required for accurate staging of liver tissue. For this purpose, in this study we took advantage of two label-free optical imaging techniques, second harmonic generation (SHG) and auto-fluorescence (AF), using two-photon excitation microscopy (TPEM). Three-dimensional ex vivo imaging of tissues from NASH model mice, followed by image processing, revealed that SHG and AF are sufficient to quantitatively characterize the hepatic capsule at an early stage and parenchymal morphologies associated with liver disease progression, respectively.     

Experimental investigation of the elastic-plastic deformation of mineralized lobster cuticle by digital image correlation

This study presents a novel experimental approach to the characterization of the deformation of a mineralized biological composite using arthropod cuticle as a model material. By performing tensile tests combined with a detailed strain analysis via digital image correlation, the elastic-plastic deformation behavior of the endocuticle of the American lobster Homarus americanus is examined. The test specimens originate from the pincher and crusher claws. For evaluating the effect of moisture on the deformation behavior, the samples are tested both in dry and in wet state. Sample characterization using the digital image correlation method requires a stochastic spot pattern on the sample surface. Digital images are then taken at subsequent deformation stages during the mechanical test. These images are used to calculate the displacement, the displacement gradient, and the strain fields via pattern correlation. The method is applied both, at a global scale to measure with high precision the stress-strain behavior of the bulk cuticle and at a microscopic scale to reveal strain heterogeneity, strain patterning, and strain localization phenomena.     

Cell and tissue deformation measurements: Texture correlation with third-order approximation of displacement gradients

Cells remarkably are capable of large deformations during motility and when subjected to mechanical force. Measurement of mechanical deformation (i.e. displacements, strain) is critical to understand functional changes in cells and biological tissues following disease, and to elucidate basic relationships between applied force and cellular biosynthesis. Microscopy-based imaging modalities provide the ability to noninvasively visualize small cell or tissue structures and track their motion over time, often using two-dimensional (2D) digital image (texture) correlation algorithms. For the measurement of complex and nonlinear motion in cells and tissues, implementation of texture correlation algorithms with high order approximations of displacement mapping terms are needed to minimize error. Here, we extend a texture correlation algorithm with up to third-order approximation of displacement mapping terms for the measurement of cell and tissue deformation. We additionally investigate relationships between measurement error and image texture, defined by subset entropy. Displacement measurement error is significantly reduced when the order of displacement mapping terms in the texture correlation algorithm matches or exceeds the order of the deformation observed. Displacement measurement error is also inversely proportional to subset entropy, with well-defined cell and tissue structures leading to high entropy and low error. For cell and tissue studies where complex or nonlinear displacements are expected, texture correlation algorithms with high order terms are required to best characterize the observed deformation.     

3D micro-scale deformations of wood in bending: synchrotron radiation muCT data analyzed with digital volume correlation

A micro-scale three-point-bending experiment with a wood specimen was carried out and monitored by synchrotron radiation micro-computed tomography. The full three-dimensional wood structure of the 1.57 × 3.42 × 0.75 mm³ specimen was reconstructed at cellular level in different loading states. Furthermore, the full three-dimensional deformation field of the loaded wood specimen was determined by digital volume correlation, applied to the reconstructed data at successive loading states. Results from two selected regions within the wood specimen are presented as continuous displacement and strain fields in both 2D and 3D. The applied combination of synchrotron radiation micro-computed tomography and digital volume correlation for the deformation analysis of wood under bending stress is a novel application in wood material science. The method offers the potential for the simultaneous observation of structural changes and quantified deformations during in situ micro-mechanical experiments. Moreover, the high spatial resolution allows studying the influence of anatomical features on the fracture behaviour of wood. Possible applications of this method range from bio-mechanical observations in fresh plant tissue to fracture mechanics aspects in structural timber.     

Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy

Mechanical properties of the adventitia are largely determined by the organization of collagen fibers. Measurements on the waviness and orientation of collagen, particularly at the zero-stress state, are necessary to relate the structural organization of collagen to the mechanical response of the adventitia. Using the fluorescence collagen marker CNA38-OG488 and confocal laser scanning microscopy, we imaged collagen fibers in the adventitia of rabbit common carotid arteries ex vivo. The arteries were cut open along their longitudinal axes to get the zero-stress state. We used semi-manual and automatic techniques to measure parameters related to the waviness and orientation of fibers. Our results showed that the straightness parameter (defined as the ratio between the distances of endpoints of a fiber to its length) was distributed with a beta distribution (mean value 0.72, variance 0.028) and did not depend on the mean angle orientation of fibers. Local angular density distributions revealed four axially symmetric families of fibers with mean directions of 0°, 90°, 43° and ?43°, with respect to the axial direction of the artery, and corresponding circular standard deviations of 40°, 47°, 37° and 37°. The distribution of local orientations was shifted to the circumferential direction when measured in arteries at the zero-load state (intact), as compared to arteries at the zero-stress state (cut-open). Information on collagen fiber waviness and orientation, such as obtained in this study, could be used to develop structural models of the adventitia, providing better means for analyzing and understanding the mechanical properties of vascular wall.     

New anatomical method of grain angles measurement using confocal microscopy and image cross-correlation

Some tropical trees with indistinct growth rings have a distinct interlocked grain that reveals their internal growth rhythm. To determine their growth rhythm, it is necessary to accurately measure the wood grain angle. The usual methods for grain angle measurement are radial splitting using wood disks, which occasionally provides inaccurate data, and serial tangential sectioning, which requires preparation and analysis of many sections. The present report proposes an easier but accurate method to measure grain angle using a single xylem transverse section. A confocal microscope was used to obtain two optical sections of different depths from a transverse section of a 7-year-old Hopea odorata Roxb. The tangential lag between the optical images was then calculated using image cross-correlation and transformed into grain angle. Radially consecutive sampling revealed distinct radial fluctuations in the grain angle. The fluctuation data were compared to data obtained by radial splitting and serial tangential sectioning. There was a strong correlation between grain angle using the three methods. In the region close to the cambium, however, the present method revealed an abrupt change in the grain angle, although radial splitting showed a smooth undulation throughout the radius. Using the present method, the analysis of a radial range of 5 cm required a single transverse section compared to 1,000 tangential sections 50-m thick. In conclusion, the present method using a single transverse section, confocal microscopy, and image cross-correlation analysis provides more accurate data than radial splitting, and is less time-consuming than serial tangential sectioning.     

Study of the microbial aggregation in Mycobacterium using image analysis and electron microscopy

Cellular aggregation, which occurs in both prokaryotes and eukaryotes, is controlled by the hydrophobicity as well as the electrokinetic potential of the cell surface and substratum. It is known that the Mycobacterium genus form aggregates, but the influence of sugar on the cellular aggregation has not been reported for this genus. The mutant strain Mycobacterium sp. MB-3683 that transforms sterol to androstenedione (AD), a steroidal precursor used by the pharmaceutical industries, was employed in this study. This strain was cultivated in a synthetic medium on three sugars (glycerol, glucose and fructose) at different concentrations, and at 144 h microbial growth, cellular aggregation, hydrophobicity, lipid content, fatty acid composition, and width of cellular walls were measured. It was observed that at different sugar concentrations, similar growth and pH were obtained. However, in fructose, the aggregation level was significantly high, followed by glycerol and glucose (fructose < glycerol < glucose). These results were confirmed using electron microscopy and the aggregate area quantified by image analysis. Hydrophobicity was the highest in fructose and the lowest in glucose. The total lipids, in contrast to cellular hydrophobicity, were higher in glucose than glycerol. Although, the hydrophilic-lipophilic balance (HLB) of principal fatty acids isolated was similar regardless of sugar used. In glycerol and fructose, the paraffins were observed, which are responsible for the high cellular hydrophobicity detected above. The width of cell wall of the organisms grown on glucose and fructose was similar, but in glycerol the walls were very thin. There is a correspondence between cell wall width and lipid content.     

Applying the digital image correlation method to estimate the mechanical properties of bacterial biofilms subjected to a wall shear stress

A digital image correlation (DIC) method was applied to characterize the mechanical behavior of Pseudomonas aeruginosa biofilms in response to wall shear stress using digital video micrographs taken from biofilm flow cells. The appearance of the biofilm in the transmitted light photomicrographs presented a natural texture which was highly conducive to random encoding for DIC. The displacement fields were calculated for two biofilm specimens. The DIC method concurred with previous analysis showing that biofilms exhibit viscoelastic behavior, but had the advantage over simple length measurements of longitudinal strain that it could precisely measure local strains in length (x) and width (y) within biofilm clusters with a 2 μm resolution as a function of time and wall shear stress. It was concluded that DIC was more accurate at measuring elastic moduli than simple length measurements, but that time-lapse 3D images would enable even more accurate estimates to be performed.     

Effect of round curvature of anterior implant-supported zirconia frameworks: finite element analysis and in vitro study using digital image correlation

Two groups of 4-unit zirconia frameworks were produced by CAD/CAM to simulate the restoration of an anterior edentulous gap supported by 2 implant-abutment assemblies. Group 1 comprised straight configuration frameworks and group 2 consisted of arched frameworks. Specimens were made with the same connector cross-section area and were cemented and submitted to static loads. Displacements were captured with two high-speed photographic cameras and analysed with video correlation system. Frameworks and the implant-abutment assembly were scanned and converted to 3DCAD objects by reverse engineering process. A specimen of each group was veneered and the corresponding 3D geometry was similarly obtained after scanning. Numerical models were created from the CAD objects and the FE analysis was performed on the zirconia frameworks and on the FPDs bi-layered with porcelain (veneered frameworks). Displacements were higher for the curved frameworks group, under any load. The predicted displacements correlated well with the experimental values of the two framework groups, but on the straight framework the experimental vertical displacements were superior to those predicted by the FEA. The results showed that the round curvature of zirconia anterior implant-supported FPDs plays a significant role on the deformation/stress of FPDs that cannot be neglected neither in testing nor in simulation and should be considered in the clinical setting.     

Strain imaging of the lateral collateral ligament using high frequency and conventional ultrasound imaging: An ex-vivo comparison

Recent first attempts of in situ ultrasound strain imaging in collateral ligaments encountered a number of challenges and illustrated a clear need for additional studies and more thorough validation of the available strain imaging methods. Therefore, in this study we experimentally validated ultrasound strain measurements of ex vivo human lateral collateral ligaments in an axial loading condition. Moreover, the use of high frequency ultrasound (>20 MHz) for strain measurement was explored and its performance compared to conventional ultrasound. The ligaments were stretched up to 5% strain and ultrasound measurements were compared to surface strain measurements from optical digital image correlation (DIC) techniques. The results show good correlations between ultrasound based and DIC based strain measures with R² values of 0.71 and 0.93 for high frequency and conventional ultrasound, subsequently. The performance of conventional ultrasound was significantly higher compared to high frequency ultrasound strain imaging, as the high frequency based method seemed more prone to errors. This study demonstrates that ultrasound strain imaging is feasible in ex vivo lateral collateral ligaments, which are relatively small structures. Additional studies should be designed for a more informed assessment of optimal in vivo strain measurements in collateral knee ligaments.     

Accurate and rapid viability assessment of Trichoderma harzianum using fluorescence-based digital image analysis

Fluorescence microscopy and image analysis were evaluated in order to assess the viability of Trichoderma harzianum, an economically important filamentous fungus. After the evaluation of the two most commonly used fluorochromes, acridine orange (AO) and fluorescein diacetate (FDA) as metabolic indicator stains, AO gave ambiguous results and therefore FDA was chosen. The lower stability at room temperature and fast fluorescence intensity decay (50% after only 30 s of illumination in UV light) could be overcome by the use of a digital image acquisition system including frame grabber and a video camera. Fresh (live) fungal hyphae emitted bright green fluorescence when stained with this dye (7.5 microg/L), whereas a total absence of fluorescence was observed when using sterilized (dead) fungal cells. Fresh cells were subjected to different lethal and sublethal treatments and the percentage of FDA stained fluorescent hyphae was then measured over the total hyphal area (% of FDA-stained area) by image analysis. At the same time, samples were cultivated in shake flasks in order to correlate this % of FDA-stained area with its growth rate, a functional indicator of viability. The linear correlation (r = 0.979) was: growth rate (g/L x h) = 2.25 x 10(-3) (% of FDA-stained area). This method was used to evaluate the viability of the fungus under two different fermentation conditions in a 10-L bioreactor. Estimated viable biomass during fermentation was strongly influenced by the process conditions. The use of FDA, with computer-aided quantitative image analysis, has made it possible to rapidly and reliably quantify the viability of T. harzianum.     

An approach to the architecture of Scutigera coleoptrata hemocyanin by electron microscopy and image processing

Summary— The 6 × 6meric hemocyanin of the centipede Scutigera coleoptrata, prepared by the single layer negative staining technique with uranyl acetate, has been investigated under the electron microscope. Isolated molecules were windowed from selected digitized micrographs. After alignment, they were submitted to correspondence analysis and hierarchical ascendant classification. Two main clusters of molecules were differentiated, and their average images were obtained. A 3D-model constructed from these images is proposed.     

New insights into the performance characteristics of the Planova-series hollow-fiber parvovirus filters using confocal and electron microscopy

Virus filtration remains a critical step in the downstream process for the production of monoclonal antibodies and other mammalian cell-derived biotherapeutics. Recent studies have shown large differences in virus capture behavior of different virus filters, although the origin of these differences is still unclear. The objective of this study was to use confocal and scanning electron microscopy to directly evaluate the capture of virus-size nanoparticles in Planova 20N and BioEX hollow-fiber virus filters. Confocal images of fluorescent nanoparticles were quantified using ImageJ image processing software based on the measured fluorescence intensity of the labeled nanoparticles. Nanoparticle capture by the Planova BioEX was independent of transmembrane pressure from 10 to 45 psi. In contrast, the Planova 20N showed significant differences in nanoparticle capture profile at low pressure, consistent with literature data showing virus breakthrough under these conditions. Images obtained after a process interruption show significant migration of previously captured nanoparticles in the Planova 20N filters but not in the BioEX. These results provide important insights into the nature of virus capture in different virus filters and its dependence on the underlying structure of the virus filtration membranes.     

Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: A literature review

Digital volume correlation (DVC) provides experimental measurements of displacements and strains throughout the interior of porous materials such as trabecular bone. It can provide full-field continuum- and tissue-level measurements, desirable for validation of finite element models, by comparing image volumes from subsequent µCT scans of a sample in unloaded and loaded states.     

Electron microscopy and image analysis of the mitochondrial outer membrane channel,VDAC

The channel protein in the outer membrane ofNeurospora crassa mitochondria, VDAC, forms extended planar crystals on the membrane. The arrays, which are induced by phospholipase A₂, are polymorphic, varying from parallelogram (P) to near-rectangular (R) geometry with increased phospholipase treatment. Computer-based analysis of projection images of negatively stained VDAC arrays indicates that the protein forms a transmembrane channel in the P array. Comparison of average images of arrays embedded in different negative stains suggests that the bore of the channel is 2–2.5 nm. The locations of functionally important lysine clusters on VDAC are inferred from the effects of succinylation on projection images of arrays negatively stained with phosphotungstate. Projection images of unstained frozen-hydrated arrays indicate the general shape of the channel and suggest each channel is formed by one 31-kDa VDAC polypeptide.     

Unsupervised organization of cervical cells using bright‐field and single‐shot digital holographic microscopy

We report results on unsupervised organization of cervical cells using microscopy of Pap‐smear samples in brightfield (3‐channel color) as well as high‐resolution quantitative phase imaging modalities. A number of morphological parameters are measured for each of the 1450 cell nuclei (from 10 woman subjects) imaged in this study. The principal component analysis (PCA) methodology applied to this data shows that the cell image clustering performance improves significantly when brightfield as well as phase information is utilized for PCA as compared to when brightfield‐only information is used. The results point to the feasibility of an image‐based tool that will be able to mark suspicious cells for further examination by the pathologist. More importantly, our results suggest that the information in quantitative phase images of cells that is typically not used in clinical practice is valuable for automated cell classification applications in general.