红掌品种亲缘关系SRAP分析

利用相关序列扩增多态性（SRAP）分子标记,从100对引物组合中筛选出 26对多态性高、条带清晰的SRAP引物,对33个红掌品种进行遗传多样性和亲缘关系分析。结果如下：（1）26对引物共扩增出366条条带,其中有314条多态性条带,多态性比率为85.79%。引物组合产生的条带数在9～23之间,平均每对引物组合扩增出14.1条和12.1条多态性条带。（2）根据SRAP扩增结果,利用UPGMA法进行聚类分析,33份材料的遗传相似系数在0.55～0.94之间,在遗传相似系数0.786处可将33个红掌品种分为5个类群。结果表明,供试品种遗传多样性丰富,本研究为品种鉴定和杂交育种提供了参考信息。     

基于ISSR标记的62个朱顶红品种的遗传关系分析及指纹图谱构建

采用ISSR标记方法分析了62个朱顶红(Hippeastrum spp.)品种(包含60个引自荷兰的品种和2个苏州本地品种)的遗传多样性,并采用UPGMA法对62个朱顶红品种进行聚类分析.在此基础上,通过特异性条带的比较及筛选,采用黑白方格示意图法构建了供试品种的ISSR指纹图谱.扩增结果显示:用11条引物从62个朱顶红品种的基因组DNA中共扩增出118条带,其中多态性条带109条,多态性条带百分率达92.4％,有5条引物扩增条带的多态性条带百分率达100.0％.62个品种间的遗传相似系数变幅较大,为0.371 4～0.842 9,表明各品种间存在丰富的遗传变异和遗传多样性.聚类分析结果显示:在遗传相似系数0.63处62个品种被分为7组,多数形态相似的品种被聚在一起;其中形态相似的白色单瓣品种间遗传相似系数较高(约0.8),大多聚在一起,表明它们同源性较高;而2个苏州本地品种间遗传相似系数最高(0.842 9),表明它们可能具有同一来源.品种‘小红星’在引物UBC873扩增图谱的450 bp处有1条特异性条带,而品种‘精灵’在引物UBC835扩增图谱的3 000 bp处有1条特异缺失条带,这2条特异性条带可分别用于品种‘小红星’和‘精灵’的鉴定.基于引物UBC835和UBC873的ISSR扩增条带组合构建了供试的62个朱顶红品种的ISSR指纹图谱,采用这一指纹图谱可对供试的所有朱顶红品种进行鉴定.     

采用RAPD技术探讨花椒的遗传多样性及其与环境的关系

采用RAPD分子标记方法分析11个花椒品种的遗传多样性,以及遗传多样性与环境因素的相关性。从60条随机引物中筛选出10条引物,共扩增出67条带,平均每个引物扩增出6．7条,其中56条具有多态性,多态比例为84％。根据品种间的遗传距离构建的聚类分析树状图,11个花椒品种的相似系数在0．08-0．92之间,可分为2个类群,这种分类与花椒的叶的外形分类结果一致。不同地域种植的同一品种材料遗传距离较大,显示花椒的遗传多样性与地域分布有关系。     

中国主要黑芝麻品种的遗传多样性分析

利用SRAP和SSR各23对引物对20个中国主要黑芝麻品种进行了遗传多样性分析。结果显示,23对SRAP引物共扩增出DNA带672条,其中多态性带152条,比率为22.62%,平均每对引物扩增总带数和多态性条带分别为29.22条和6.61条。23对SSR多态性引物共扩增出DNA带92条,每对引物扩增出3~6条,平均4.00条;每对引物扩增出多态性带1~5条,平均3.09条,多态性带比率平均为77.17%。20个黑芝麻品种间的遗传相似系数为0.8547~0.9804,遗传距离为0.0159~0.0921,遗传多样性匮乏,遗传基础狭窄。聚类结果表明,来自主产区江西的11个品种明显聚在一起,且江西黑芝麻品种的遗传相似系数高于其他省份品种,遗传距离低于其他省份品种,与其他省份品种的差异均达到极显著水平。加强资源引进和利用是拓宽中国黑芝麻品种遗传基础的迫切要求。     

牛鞭草品种EST-SSR指纹图谱构建及遗传多样性分析

为探讨牛鞭草(Hemarthria spp.)品种间的遗传多样性,从86对EST-SSR引物中筛选出8对引物对牛鞭草属6个品种进行指纹图谱的构建及遗传多样性分析。结果表明,8对EST-SSR引物对牛鞭草属6个品种共扩增出193条清晰条带,多态性条带161条,多态性比例为83.4%。每条引物的多态信息含量(PIC)为0.480~0.695,平均为0.602。UPGMA聚类分析表明,牛鞭草属6个品种在相似系数为0.652处可分为两大类群。8对EST-SSR引物均能将6个品种完全区分开,以3对EST-SSR引物扩增的电泳图谱为基础,建立了牛鞭草属6个品种的指纹图谱标准模式图,每个品种都有唯一的指纹图谱。牛鞭草属6个品种的平均Nei’s基因多样性指数为0.333,平均Shannon信息指数为0.496,品种间的相似系数介于0.399~0.782之间。可见,牛鞭草属植物品种的遗传多样性较丰富,种间差异明显。     

基于改良RAPD标记的花梅与果梅品种的遗传关系分析

为了探讨梅(Prunus mume Sieb.et Zucc.)的2种类型--花梅与果梅的遗传多样性,利用23条长度为11bp的随机引物以及严格筛选退火温度的改良RAPD-PCR优化体系对25个花梅和21个果梅品种的基因组总DNA进行了分析,并在此基础上采用UPGMA聚类方法对46个花梅与果梅品种间的遗传关系进行了分析.结果显示:使用重复性好、条带清晰且多态性强的23条随机引物,共从46个花梅和果梅品种基因组总DNA中扩增出131条带,其中多态性条带107条,多态性条带百分率达81.7%,说明花梅和果梅各品种间具有丰富的遗传多样性.聚类分析结果显示:46个花梅和果梅品种的遗传相似系数为0.63～0.83;在遗传相似系数0.66处,供试的46个品种被分为5组.A组包含6个果梅品种和11个花梅品种;B组仅包含4个花梅品种;C组包含16个品种,其中15个品种为果梅;D组仅包含4个花梅品种;E组也仅包含5个花梅品种.研究结果表明:花梅和果梅具有相近的亲缘关系,遗传背景相似.     

野生扁蓿豆种质资源AFLP遗传多样性的分析

本研究采用AFLP标记对河北省、辽宁省、吉林省、山西省、内蒙古自治区和西藏自治区的10份野生扁蓿豆居群进行遗传多样性分析。从64对AFLP引物组合中,筛选出8对扩增条带清晰、多态性高的引物组合,8对引物共扩增出640个条带,其中多态性条带有472个,多态性位点百分率为73.8%;Nei's基因多样性指数平均为0.157,Shannon's多态性信息指数平均为0.099;居群间遗传相似系数(GS)平均值为0.827。聚类和主成分分析可将10个扁蓿豆居群聚为3大类,结果与居群的地理分布大致相符,呈一定的地域性分布规律。由此可见,AFLP分子标记研究结果能较好地揭示扁蓿豆居群间的遗传多样性。对我国各地的野生扁蓿豆资源的广泛收集、评价和基因资源的保护有重要的意义。     

猕猴桃SCoT遗传多样性分析及指纹图谱的构建

利用SCoT标记对32个猕猴桃品种进行了遗传多样性分析。从47个SCoT引物中筛选了11个引物进行PCR扩增,共扩增出185个条带,其中多态性条带180个,多态性比率为97.30%。各引物Nei's基因多样性指数（H）平均为0.238 4,Shannon's信息指数（I）平均为0.377 8。利用UPGMA构建32份猕猴桃种质资源的聚类树状图。在遗传相似系数为0.78处可将32个猕猴桃品种分为5组,聚类结果与形态学分类基本一致。利用4条引物扩增的16个多态性位点构建了32个猕猴桃品种的DNA指纹图谱,可以将32个猕猴桃品种区分并准确鉴定。     

基于EST-SSR标记的莲属种质资源遗传多样性分析

利用EST-SSR分子标记对30个亚洲莲、6个美洲莲及14个亚美杂交莲品种(野生居群)进行遗传多样性分析,结果表明:从123对EST-SSR引物中筛选出52对(42.3%)扩增稳定、具有多态性的引物;利用这52对引物对50个不同类型代表的莲属品种进行扩增,共获得177条多态性条带,引物的等位基因数和多态性信息量(PIC)的范围分别为2~8个和0.63(NNFB-1059)-0.91(NNFB-750),平均为3.4个和0.79。利用NTSYS-pc2.11软件对扩增结果进行Jaccard相似性系数分析,50个荷花品种材料遗传相似系数为0.24~0.86;通过UPGMA法进行聚类分析,在遗传相似系数0.37处供试荷花材料可分为4大类群:亚洲莲品种均聚类在I、II类群中,III类群绝大部分为亚美杂交莲品种,IV类群为美洲莲,亚美杂交莲品种与亚洲莲品种的亲缘关系相对较近,与传统分类及前人研究结果相一致。     

51个春兰(Cymbidium goeringii)品种的AFLP遗传多样性分析

为了揭示春兰品种的遗传多样性和亲缘关系,为春兰种质资源的有效利用和开发提供依据,采用AFLP技术对51个春兰品种进行了遗传多样性分析,经筛选得到了8对条带清晰、多态性高的引物,共扩增出1315条DNA片段,其中多态性条带为1217条,平均1对引物扩增条带164条,多态性带152条,多态性位点频率为92.5%,表明春兰品种具有丰富的遗传多态性。49个品种含有特有带。51个品种间遗传相似系数变化范围为0.501~0.716,聚类分析表明,51个春兰品种共分为5个类群,来自同一地区的品种并没有聚在一起,表明春兰品种的遗传背景混乱。AFLP分子标记技术能有效地分析春兰品种的遗传多样性和亲缘关系。     

影响水稻光合日变化的酶和相关因素的分析

水稻叶片的最大光合速率出现在上午１０：００时,Ｒｕｂｉｓｃｏ初始活力也在此时达到最大,然后逐渐降低,下午１４：００时略上升后又下降．Ｒｕｂｉｓｃｏ初始活力与光合速率之间极显著相关,相关系数为 ０．９４７４．运用相关性分析、回归分析、通径分析,对晴（有时有云）天气水稻叶片的光合速度、光合关键酶及有关因素的日变化进行综合评估,结果发现中午光合下降主要来自气孔限制,同时Ｒｕｂｉｓｃｏ活性也下降;Ｒｕｂｉｓｃｏ活性是影响光合日变化的又一重要生化因子．体内Ｒｕｂｉｓｃｏ活性受Ｒｕｂｉｓｃｏ活化酶的调节．     

甲醇对酵母过氧化氢酶活性的影响机理研究

将酵母过氧化氢酶加入一定比例的甲醇,测定其活性变化。结果表明:在含2%甲醇时酶活比对照提高4026%。将粗酶液用70%饱和度的硫酸铵盐析后离心所得的上清液再加入硫酸铵至80%饱和度,离心的沉淀溶解在缓冲液中,上SephadexG75柱,分离出的有酶活性的蛋白峰经电泳得一条蛋白带,说明过氧化氢酶已经被提纯到电泳纯。光谱分析发现,甲醇处理后过氧化氢酶纯酶的吸收光谱和荧光发射光谱与未经处理的比较基本不变,而差示光谱出现明显的正峰和负峰。由动力学分析可知,在甲醇中,过氧化氢酶的Vmax和Km值均有不同程度提高 。     

凡纳滨对虾各月龄性状的主成分与判别分析

为了研究凡纳滨对虾各性状增长规律和判定最佳生长季节凡纳滨对虾的体格与月龄的关系,选择1～6月龄凡纳滨对虾各1000只,选择全长、体长、第一腹节背高、第三腹节背高、第一腹节背宽、头胸甲长和体重共7个性状,进行主成分与判别分析.结果表明:各月龄凡纳滨对虾性状之间均呈现显著的正相关(P<0.01), 其中以全长与体长的相关性最为明显,1月龄凡纳滨对虾体重与形态性状的相关系数较小.各月龄凡纳滨对虾的主成分有所不同,1～2月龄凡纳滨对虾的第一主成分为长度因子,第二主成分为宽度因子,第三主成分为高度因子;3月龄凡纳滨对虾的第一主成分与1～2月龄凡纳滨对虾一致,但第二主成分为高度因子,第三主成分为体重因子;4～6月龄凡纳滨对虾的第一主成分为体重因子,第二主成分为高度因子,第三主成分为宽度因子.1～3月龄凡纳滨对虾形态性状的增长优先于体重, 4～6月龄凡纳滨对虾体重优先于形态性状的增长.错过最佳生长季节的凡纳滨对虾的与体格大小相符的月龄可通过建立的判别式来判断,总的判别准确率为98.98%,其中2～4月龄凡纳滨对虾的判别准确率为100%.     

Some remarks about the analysis of active control studies

In an active-controlled trial, the experimental treatment can be declared to be non-inferior to the control if the confidence interval for the difference excludes a fixed pre-specified margin. Recently, some articles have discussed an alternative method where the data from the current study and placebo-controlled studies for the active control are combined together into a single test statistic to test whether a fixed fraction of the effect of the active control is preserved. It has been shown that, conditional on nuisance parameters from the active-controlled study, a fixed margin can be defined that will be operationally equivalent to this latter method. In this article, we will discuss statistical properties associated with these approaches. Specifically, the interim monitoring boundaries and level of evidence will be considered.     

Phenotypic evaluation of genetic variability and selection of yield contributing traits in chickpea recombinant inbred line population under high temperature stress

Heat is a major abiotic stress that drastically reduces chickpea yield. This study aimed to identify heat-responsive traits to sustain crop productivity by screening a recombinant inbred line (RILs) population at two locations in India (Ludhiana and Faridkot). The RIL population was derived from an inter-specific cross between heat-tolerant genotype GPF 2 (C. arietinum L.) and heat sensitive accession ILWC 292 (C. reticulatum). The pooled analysis of variance showed highly significant differences for all the traits in RILs and most of the traits were significantly affected by heat stress at both locations. High values of genotypic coefficient of variation (19.52–38.53%), phenotypic coefficient of variation (20.29–39.85%), heritability (92.50–93.90%), and genetic advance as a percentage of mean (38.68–76.74%) have been observed for plant height, number of pods per plant, biomass, yield, and hundred seed weight across the heat stress environments. Association studies and principal component analysis showed a significant positive correlation of plant height, number of pods per plant, biomass, hundred seed weight, harvest index, relative leaf water content, and pollen viability with yield under both timely-sown and late-sown conditions. Path analysis revealed that biomass followed by harvest index was the major contributor to yield among the environments. Both step-wise and multiple regression analyses concluded that number of pods per plant, biomass and harvest index consistently showed high level of contribution to the total variation in yield under both timely-sown and late-sown conditions. Thus, the holistic approach of these analyses illustrated that the promising traits provide a framework for developing heat-tolerant cultivars in chickpea.Supplementary InformationThe online version contains supplementary material available at 10.1007/s12298-021-00977-5.     

Discrimination of higher plant calluses based on embryogenic capacity and taxonomic classification by pyrolysis mass spectrometry

Pyrolysis mass spectrometry (PyMS) is a rapid, simple, high-resolution analytical method based on thermal degradation of complex material in a vacuum, and has been widely applied to the discrimination of closely related microbial strains. Minimally prepared samples of embryogenic and non-embryogenic calluses derived from various higher plants (sweet potato, morning glory, Korean ginseng, Siberian ginseng, and balloon flower) were subjected to PyMS for spectral fingerprinting. A dendrogram based on the unweighted pair group method, with arithmetic mean of pyrolysis mass spectra, divided the calluses into Siberian ginseng embryogenic callus and the others, which were subsequently divided into embryogenic and non-embryogenic callus groups, regardless of plant species from which the calluses were derived. In the non-embryogenic callus group, the dendrogram was in agreement with the known taxonomy of the plants. These results indicate that PyMS analysis could be applied for discriminating plant calluses based on embryogenic capacity and taxonomic classification.     

Normal Approximations of Exact Tests in Configural Frequency Analysis

The most common tests for types and antitypes in configural frequency analysis are normal approximations of exact tests. In the paper such statistics under the complete independence model and under the fixed margins model are discussed. It turns out that these test statistics are not acceptable when the number of simultaneously performed tests is large or when the expected frequencies are small. In these cases, the use of exact tests is advocated and some existing computer programs for such tests are indicated. A normal approximation based on the strong version of the De Moivre-Laplace limit theorem is also discussed. Empirical examples are given from longitudinal data describing psychological development of boys.     

Comparison of the Halving of Tablets Prepared with Eccentric and Rotary Tablet Presses

The aim of this study was to compare the densification of powder mixtures on eccentric and rotary tablet presses and to establish relationships with the halving properties of the resulting scored tablets. This is an important problem because the recent guidelines of EU require verification of the equal masses of tablet halves. The models of Walker, Heckel, and Kawakita were used to describe the powder densification on the two machines. The calculated parameters revealed that the shorter compression cycle of rotary machines results in poorer densification and lower tablet hardness at a given compression force. This is manifested in poorer halving properties, which are influenced mainly by the hardness. Better densification improves the halving even at lower tablet hardness. This demonstrates that these parameters can be good predictors of tablet halving properties.     

土壤中微生物含量影响因素的统计方法分析

【目的】采用多元方差分析、多元线性回归分析、通径分析等统计方法,并利用多元统计方法对土壤中微生物含量进行分析。【方法】通过研究这3种常用统计方法的原理、应用条件、适用于解决的问题等,用不同的方法分析影响土壤中微生物含量的各种因素,利用SPSS软件求解。【结果】得出不同降雨量下土壤中的微生物含量存在差异性;铵态氮含量和海拔高度与变形菌门含量呈显著的线性关系,土壤中变形菌门含量随着铵态氮含量增多而增多,且铵态氮含量对变形菌门含量所起的直接作用最大;土壤中铵态氮含量、总氮量和海拔高度与放线菌门含量呈显著的线性关系,且均为负相关;其中总氮量对土壤中放线菌门含量的变化所起的负面作用最大,但铵态氮含量对放线菌门含量所起的直接作用最大。对比描述性统计方法与多元方差分析方法可知,应用描述性统计方法只能得出降雨量是影响土壤中不同细菌群落相对含量的因素之一,而不知降雨量对微生物含量变化的影响程度,6个梯度降雨量引起地显著差异究竟是由哪种微生物引起的,方差分析方法可以解决以上的问题。对比多元线性回归分析方法与通径分析方法可知,多元线性回归分析得出的相关系数只能表示铵态氮含量、总氮量和海拔与变形菌门含量(放线菌门含量)之间关系的密切程度,但无法解释和分析这种关系的构成和来源,通径分析方法可以解决这个问题。【结论】通径分析方法在分析相关问题时要优于多元线性回归分析方法,通径分析比多元线性回归分析方法更能体现因素对变形菌门含量(放线菌门含量)的直接影响和间接影响,分析结论更直观、更能说明问题。