Surface-accessible residues in the monomeric and assembled forms of a bacterial surface layer protein

The S-layer protein SbsB of the thermophilic, Gram-positive organism Bacillus stearothermophilus PV72/p2 forms a crystalline, porous array constituting the outermost component of the cell envelope. SbsB has a molecular mass of 98 kDa, and the corresponding S-layer exhibits an oblique lattice symmetry. To investigate the molecular structure and assembly of SbsB, we replaced 75 residues (mainly serine, threonine, and alanine), located throughout the primary sequence, with cysteine, which is not found in the wild-type protein. As determined by electron microscopy, 72 out of 75 mutants formed regularly-structured self-assembly products identical to wild-type, thereby proving that the replacement of most of the selected amino acids by cysteine does not dramatically alter the structure of the protein. The three defective mutants, which showed a greatly reduced ability to self-assemble, were, however, successfully incorporated into S-layers of wild-type protein. Monomeric SbsB mutants and SbsB mutants assembled into S-layers were subjected to a surface accessibility screen by targeted chemical modification with a 5-kDa hydrophilic cysteine-reactive polyethylene glycol conjugate. In the monomeric form of SbsB, 34 of the examined residues were not surface accessible, while 23 were classified as very accessible, and 18 were of intermediate surface accessibility. By contrast, in the assembled S-layers, 57 of the mutated residues were not accessible, six were very accessible, and 12 of intermediate accessibility. Together with other structural information, the results suggest a model for SbsB in which functional domains are segregated along the length of the polypeptide chain.     

Identifying Assembly-Inhibiting and Assembly-Tolerant Sites in the SbsB S-Layer Protein from Geobacillus stearothermophilus

Surface layer (S-layer) proteins self-assemble into two-dimensional crystalline lattices that cover the cell wall of all archaea and many bacteria. We have generated assembly-negative protein variants of high solubility that will facilitate high-resolution structure determination. Assembly-negative versions of the S-layer protein SbsB from Geobacillus stearothermophilus PV72/p2 were obtained using an insertion mutagenesis screen. The haemagglutinin epitope tag was inserted at 23 amino acid positions known to be located on the monomer protein surface from a previous cysteine accessibility screen. Limited proteolysis, circular dichroism, and fluorescence were used to probe whether the epitope insertion affected the secondary and tertiary structures of the monomer, while electron microscopy and size-exclusion chromatography were employed to examine proteins' ability to self-assemble. The screen not only identified assembly-compromised mutants with native fold but also yielded correctly folded, self-assembling mutants suitable for displaying epitopes for biomedical and biophysical applications, as well as cryo-electron microscopy imaging. Our study marks an important step in the analysis of the S-layer structure. In addition, the approach of concerted insertion and cysteine mutagenesis can likely be applied for other supramolecular assemblies.     

On the metabolic activation of the carcinogen N-hydroxy-N-2-acetylaminofluorene : III. Oxidation with horseradish peroxidase to yield 2-nitrosofluorene and N-acetoxy-N-2-acetylaminofluorene

Previous studies have shown that the carcinogen N-hydroxy-2-acetylaminofluorene is converted by one-electron oxidants to a free nitroxide radical which dismutates to N-acetoxy-2-acetylaminofluorene and 2-nitrosofluorene. The present study shows that the same oxidation can be achieved with horseradish peroxidase and H₂O₂. The free radical intermediate was detected by its ESR signal, and the yields of N-acetoxy-2-acetylaminofluorene and of 2-nitrosofluorene were determined under a number of conditions. Addition of tRNA to the reaction mixture containing N-acetoxy-N-2-acetyl[2′-³H]aminofluorene yielded tRNA-bound radioactivity; addition of guanosine yielded a reaction product which appears to be N-guanosin-8-yl)-2-acetylaminofluorene. The latter compound has previously been identified as a reaction product of N-acetoxy-2-acetylaminofluorene and guanosine. Preliminary attempts to demonstrate the formation of a nitroxide free radical or its dismutation products with rat liver mixed function oxidase systems were not successful.     

Experimental Evidence for the Existence of a Stable Half-Barrel Subdomain in the (β/α)8-Barrel Fold

The (β/α)₈-barrel is one of the most common folds functioning as enzymes. The emergence of two (β/α)₈-barrel enzymes involved in histidine biosynthesis, each of which has a twofold symmetric structure, has been proposed to be a consequence of tandem duplication and fusion of a (β/α)₄-half-barrel. However, little evidence has been found for the existence of an ancestral half-barrel in the evolution of other (β/α)₈-barrel proteins. In order to detect remnants of an ancestral half-barrel in the (β/α)₈-barrel structure of Escherichia coli N-(5′-phosphoribosyl)anthranilate isomerase, we engineered three potential half-barrel units, (β/α)_1-4, (β/α)_3-6, and (β/α)_5-8. Among these three arrangements, only (β/α)_3-6 is stable; it exists in equilibrium between monomeric and dimeric forms. Thus, the central segment of N-(5′-phosphoribosyl)anthranilate isomerase from E. coli can serve as a half-barrel precursor. A tandem duplication of (β/α)_3-6 yielded predominantly monomeric structures that were quite stable. This result exemplified that the structural characteristics of noncovalently assembled half-barrels could be improved by duplication and fusion. Moreover, our results may provide information regarding the local structural units that encompass interactions important for the early folding events of this ubiquitous protein conformation.     

Identification of Interacting Regions within the Coiled Coil of the Escherichia coli Structural Maintenance of Chromosomes Protein MukB

MukB, a divergent structural maintenance of chromosomes (SMC) protein, is important for chromosome segregation and condensation in Escherichia coli and other γ-proteobacteria. MukB and canonical SMC proteins share a common five-domain structure in which globular N- and C-terminal regions combine to form an ABC-like ATPase domain. This ATPase domain is connected to a central, globular dimerization domain, commonly called the “hinge” domain, by a long antiparallel coiled coil. Although the ATPase and hinge domains of SMC proteins have been the subject of extensive investigation, little is known about the coiled coil, in spite of its clear importance for SMC function. This limited knowledge is primarily due to a lack of structural information. We report here the first experimental constraints on the relative alignment of the N- and C-terminal halves of the MukB coiled coil, obtained by a combination of limited proteolysis and site-directed cross-linking approaches. Using these experimental constraints, phylogenetic data, and coiled-coil prediction algorithms, we propose a pairing scheme for the discontinuous segments in the coiled coil. This structural model will not only facilitate the study of the physiological role of this unusually long and flexible antiparallel coiled coil but also help to delineate the boundaries between MukB domains.     

Slow Myosin ATP Turnover in the Super-Relaxed State in Tarantula Muscle

We measured the nucleotide turnover rate of myosin in tarantula leg muscle fibers by observing single turnovers of the fluorescent nucleotide analog 2′-/3′-O-(N′-methylanthraniloyl)adenosine-5′-O-triphosphate, as monitored by the decrease in fluorescence when 2′-/3′-O-(N′-methylanthraniloyl)adenosine-5′-O-triphosphate (mantATP) is replaced by ATP in a chase experiment. We find a multiexponential process with approximately two-thirds of the myosin showing a very slow nucleotide turnover time constant (∼ 30 min). This slow-turnover state is termed the super-relaxed state (SRX). If fibers are incubated in 2′-/3′-O-(N′-methylanthraniloyl)adenosine-5′-O-diphosphate and chased with ADP, the SRX is not seen, indicating that trinucleotide-relaxed myosins are responsible for the SRX. Phosphorylation of the myosin regulatory light chain eliminates the fraction of myosin with a very long lifetime. The data imply that the very long-lived SRX in tarantula fibers is a highly novel adaptation for energy conservation in an animal that spends extremely long periods of time in a quiescent state employing a lie-in-wait hunting strategy. The presence of the SRX measured here correlates well with the binding of myosin heads to the core of the thick filament in a structure known as the “interacting-heads motif,” observed previously by electron microscopy. Both the structural array and the long-lived SRX require relaxed filaments or relaxed fibers, both are lost upon myosin phosphorylation, and both appear to be more stable in tarantula than in vertebrate skeletal or vertebrate cardiac preparations.     

Characterisation of the interface between nucleophosmin (NPM) and p53: potential role in p53 stabilisation

We have used surface plasmon resonance to quantify the kinetics and stoichiometry of the interaction between p53 and nucleophosmin (NPM). Domains characterising the interface between the two proteins were identified by chemical cross-linking, proteolytic digestion and mass spectrometry based peptide mapping.We show that the C-terminal domain of NPM (residues 242-269) interacts with two regions of p53 (residues 175-196 and residues 343-363) which belong, respectively, to the DNA binding domain and the tetramerisation domain. Potential biological consequences of such interactions are discussed.     

Characterisation of the Nucleotide Exchange Factor ITSN1L: Evidence for a Kinetic Discrimination of GEF-Stimulated Nucleotide Release from Cdc42

Cdc42, a member of the Ras superfamily of small guanine nucleotide binding proteins, plays an important role in regulating the actin cytoskeleton, intracellular trafficking, and cell polarity. Its activation is controlled by guanine nucleotide exchange factors (GEFs), which stimulate the dissociation of bound guanosine-5′-diphosphate (GDP) to allow guanosine-5′-triphosphate (GTP) binding. Here, we investigate the exchange factor activity of the Dbl-homology domain containing constructs of the adaptor protein Intersectin1L (ITSN1L), which is a specific GEF for Cdc42. A detailed kinetic characterisation comparing ITSN1L-mediated nucleotide exchange on Cdc42 in its GTP- versus GDP-bound state reveals a kinetic discrimination for GEF-stimulated dissociation of GTP: The maximum acceleration of the intrinsic mGDP [2′/3′-O-(N-methyl-anthraniloyl)-GDP] release from Cdc42 by ITSN1L is accelerated at least 68,000-fold, whereas the exchange of mGTP [2′/3′-O-(N-methyl-anthraniloyl)-GTP] is stimulated only up to 6000-fold at the same GEF concentration. The selectivity in nucleotide exchange kinetics for GDP over GTP is even more pronounced when a Cdc42 mutant, F28L, is used, which is characterised by fast intrinsic dissociation of nucleotides. We furthermore show that both GTP and Mg²⁺ ions are required for the interaction with effectors. We suggest a novel model for selective nucleotide exchange residing on a conformational change of Cdc42 upon binding of GTP, which enables effector binding to the Cdc42 · GTP complex but, at the same time, excludes efficient modulation by the GEF. The higher exchange activity of ITSN1L towards the GDP-bound conformation of Cdc42 could represent an evolutionary adaptation of this GEF that ensures nucleotide exchange towards the formation of the signalling-active GTP-bound form of Cdc42 and avoids dissociation of the active complex.     

Identification and synthesis of N'-(2-oxoindolin-3-ylidene)hydrazide derivatives against c-Met kinase

A series of N′-(2-oxoindolin-3-ylidene)hydrazide derivatives were identified as moderately potent inhibitors against c-Met kinase by pharmacophore-based virtual screening and chemical synthesis methods. The structure-activity relationship (SAR) at various positions of the scaffold was investigated and its binding mode with c-Met kinase was analyzed by molecular modeling studies. In this study, two potent compounds D2 and D25, with IC₅₀ value at 1.3 μM and 2.2 μM against c-Met kinase respectively, were identified. Finally, based on the clues extracted from this study, future development for the optimization of this scaffold was discussed.     

The ATPase Cycle of PcrA Helicase and Its Coupling to Translocation on DNA

The superfamily 1 bacterial helicase PcrA has a role in the replication of certain plasmids, acting with the initiator protein (RepD) that binds to and nicks the double-stranded origin of replication. PcrA also translocates single-stranded DNA with discrete steps of one base per ATP hydrolyzed. Individual rate constants have been determined for the DNA helicase PcrA ATPase cycle when bound to either single-stranded DNA or a double-stranded DNA junction that also has RepD bound. The fluorescent ATP analogue 2′(3′)-O-(N-methylanthraniloyl)ATP was used throughout all experiments to provide a complete ATPase cycle for a single nucleotide species. Fluorescence intensity and anisotropy stopped-flow measurements were used to determine rate constants for binding and release. Quenched-flow measurements provided the kinetics of the hydrolytic cleavage step. The fluorescent phosphate sensor MDCC-PBP was used to measure phosphate release kinetics. The chemical cleavage step is the rate-limiting step in the cycle and is essentially irreversible and would result in the bound ATP complex being a major component at steady state. This cleavage step is greatly accelerated by bound DNA, producing the high activation of this protein compared to the protein alone. The data suggest the possibility that ADP is released in two steps, which would result in bound ADP also being a major intermediate, with bound ADP·P_i being a very small component. It therefore seems likely that the major transition in structure occurs during the cleavage step, rather than P_i release. ATP rebinding could then cause reversal of this structural transition. The kinetic mechanism of the PcrA ATPase cycle is very little changed by potential binding to RepD, supporting the idea that RepD increases the processivity of PcrA by increasing affinity to DNA rather than affecting the enzymatic properties per se.     

The cAMP Receptor-Like Protein CLP Is a Novel c-di-GMP Receptor Linking Cell-Cell Signaling to Virulence Gene Expression in Xanthomonas campestris

Cyclic-di-GMP [bis-(3′-5′)-cyclic diguanosine monophosphate] controls a wide range of functions in eubacteria, yet little is known about the underlying regulatory mechanisms. In the plant pathogen Xanthomonas campestris, expression of a subset of virulence genes is regulated by c-di-GMP and also by the CAP (catabolite activation protein)-like protein XcCLP, a global regulator in the CRP/FNR superfamily. Here, we report structural and functional insights into the interplay between XcCLP and c-di-GMP in regulation of gene expression. XcCLP bound target promoter DNA with submicromolar affinity in the absence of any ligand. This DNA-binding capability was abrogated by c-di-GMP, which bound to XcCLP with micromolar affinity. The crystal structure of XcCLP showed that the protein adopted an intrinsically active conformation for DNA binding. Alteration of residues of XcCLP implicated in c-di-GMP binding through modeling studies caused a substantial reduction in binding affinity for the nucleotide and rendered DNA binding by these variant proteins insensitive to inhibition by c-di-GMP. Together, these findings reveal the structural mechanism behind a novel class of c-di-GMP effector proteins in the CRP/FNR superfamily and indicate that XcCLP regulates bacterial virulence gene expression in a manner negatively controlled by the c-di-GMP concentrations.     

New Aspects of the Spontaneous Polymerization of Actin in the Presence of Salts

The mechanism of salt-induced actin polymerization involves the energetically unfavorable nucleation step, followed by filament elongation by the addition of monomers. The use of a bifunctional cross-linker, N,N′-(1,4-phenylene)dimaleimide, revealed rapid formation of the so-called lower dimers (LD) in which actin monomers are arranged in an antiparallel fashion. The filament elongation phase is characterized by a gradual LD decay and an increase in the yield of “upper dimers” (UD) characteristic of F-actin. Here we have used 90° light scattering, electron microscopy, and N,N′-(1,4-phenylene)dimaleimide cross-linking to reinvestigate relationships between changes in filament morphology, LD decay, and increase in the yield of UD during filament growth in a wide range of conditions influencing the rate of the nucleation reaction. The results show irregularity and instability of filaments at early stages of polymerization under all conditions used, and suggest that an earlier documented coassembling of LD with monomeric actin contributes to the initial disordering of the filaments rather than to the nucleation of polymerization. The effects of the type of G-actin-bound divalent cation (Ca²⁺/Mg²⁺), nucleotide (ATP/ADP), and polymerizing salt on the relation between changes in filament morphology and progress in G-actin-to-F-actin transformation show that ligand-dependent alterations in G-actin conformation determine not only the nucleation rate but also the kinetics of ordering of the filament structure in the elongation phase. The time courses of changes in the yield of UD suggest that filament maturation involves cooperative propagation of “proper” interprotomer contacts. Acceleration of this process by the initially bound MgATP supports the view that the filament-destabilizing conformational changes triggered by ATP hydrolysis and P_i liberation during polymerization are constrained by the intermolecular contacts established between MgATP monomers prior to ATP hydrolysis. An important role of contacts involving the DNase-I-binding loop and the C-terminus of actin is proposed.     

Mechanism of formation of actomyosin interface

Force generation in muscle results from binding of myosin to F-actin. ATP binding to myosin provides energy to dissociate actomyosin complex while the hydrolysis of ATP is needed for re-binding of myosin to F-actin. At the end of each cycle myosin and actin form a tight complex with a substantial interface area. We investigated the dynamics of formation of actomyosin interface in presence and absence of nucleotides by quenched flow cross-linking technique. We showed previously that myosin head (subfragment 1, S1) directly interacts with at least two monomers in the actin filament. The quenched flow cross-linking experiments revealed that the initial contact (in presence or absence of nucleotides) occurs between loop 635-647 of S1 and 1-12 N-terminal residues of one actin and, then, the second contact forms between loop 567-574 of S1 and the N terminus of the second actin. The distance between these two loops in S1 corresponds to the distance between N termini of two actins in the same strand (53 A) but is smaller than that between two actins from the different strands (102 A). The formation of the actomyosin complex proceeds in ordered sequence: S1 initially binds to one actin then binds with the second actin located in the same strand but probably closer to the barbed end of F-actin. The presence of nucleotides slows down the interaction of S1 with the second actin, which correlates with recently proposed cleft movement in a 50 kDa domain of S1. The sequential mechanism of formation of actomyosin interface starting from one end and developing towards the barbed end might be involved in force generation and directional movement in actin-myosin system.     

Oritavancin Binds to Isolated Protoplast Membranes but not Intact Protoplasts of Staphylococcus aureus

Solid-state NMR has been used to examine the binding of N′-4-[(4-fluorophenyl)benzyl)]chloroeremomycin, a fluorinated analogue of oritavancin, to isolated protoplast membranes and whole-cell sucrose-stabilized protoplasts of Staphylococcus aureus, grown in media containing [1-¹³C]glycine and l-[?-¹⁵N]lysine. Rotational-echo double-resonance NMR was used to characterize the binding by estimating internuclear distances from ¹⁹F of oritavancin to ¹³C and ¹⁵N labels of the membrane-associated peptidoglycan and to the ³¹P of the phospholipid bilayer of the membrane. In isolated protoplast membranes, both with and without 1 M sucrose added to the buffer, the nascent peptidoglycan was extended away from the membrane surface and the oritavancin hydrophobic side chain was buried deep in the exposed lipid bilayer. However, there was no N′-4-[(4-fluorophenyl)benzyl)]chloroeremomycin binding to intact sucrose-stabilized protoplasts, even though the drug bound normally to the cell walls of whole cells of S. aureus in the presence of 1 M sucrose. As shown by the proximity of peptidoglycan-bridge ¹³C labels to phosphate ³¹P, the nascent peptidoglycan of the intact protoplasts was confined to the membrane surface.     

Genetically Derepressed Nucleoplasmic Stellate Protein in Spermatocytes of D. melanogaster Interacts with the Catalytic Subunit of Protein Kinase 2 and Carries Histone-Like Lysine-Methylated Mark

Summary

The X-chromosome-linked clusters of the tandemly repeated testis-specific Stellate genes of Drosophila melanogaster, encoding proteins homologous to the regulatory β-subunit of the protein kinase casein kinase 2 (CK2), are repressed in wild-type males. Derepression of Stellate genes in the absence of the Y chromosome or Y-linked crystal locus (crystal line) causes accumulation of abundant protein crystals in testes and different meiotic abnormalities, which lead to partial or complete male sterility. To understand the cause of abnormalities in chromosome behavior owing to Stellate overexpression, we studied subcellular localization of Stellate proteins by biochemical fractionation and immunostaining of whole testes. We showed that, apart from the known accumulation of Stellate in crystalline form, soluble Stellate was located exclusively in the nucleoplasm, whereas Stellate crystals were located mainly in the cytoplasm. Coimmunoprecipitation experiments revealed that the α-subunit of the protein kinase CK2 (CK2α) was associated with soluble Stellate. Interaction between soluble Stellate and CK2α in the nucleus could lead to modulations in the phosphorylation of nuclear targets of CK2 and abnormalities in the meiotic segregation of chromosomes. We also observed that Stellate underwent lysine methylation and mimicked trimethyl-H3K9 epigenetic modification of histone H3 tail.     

Kinetics of Deoxy-CTP Incorporation Opposite a dG-C8-N-2-Aminofluorene Adduct by a High-Fidelity DNA Polymerase

The model carcinogen N-2-acetylaminofluorene covalently binds to the C8 position of guanine to form two adducts, the N-(2′-deoxyguanosine-8-yl)-aminofluorene (G-AF) and the N-2-(2′-deoxyguanosine-8-yl)-acetylaminofluorene (G-AAF). Although they are chemically closely related, their biological effects are strongly different and they are processed by different damage tolerance pathways. G-AF is bypassed by replicative and high-fidelity polymerases, while specialized polymerases ensure synthesis past of G-AAF. We used the DNA polymerase I fragment of a Bacillus stearothermophilus strain as a model for a high-fidelity polymerase to study the kinetics of incorporation of deoxy-CTP (dCTP) opposite a single G-AF. Pre-steady-state kinetic experiments revealed a drastic reduction in dCTP incorporation performed by the G-AF-modified ternary complex. Two populations of these ternary complexes were identified: (i) a minor productive fraction (20%) that readily incorporates dCTP opposite the G-AF adduct with a rate similar to that measured for the adduct-free ternary complexes and (ii) a major fraction of unproductive complexes (80%) that slowly evolve into productive ones. In the light of structural data, we suggest that this slow rate reflects the translocation of the modified base within the active site, from the pre-insertion site into the insertion site. By making this translocation rate limiting, the G-AF lesion reveals a novel kinetic step occurring after dNTP binding and before chemistry.     

Purification of an Arabidopsis chloroplast extract with in vitro RNA processing activity on psbA and petD 3'-untranslated regions

The mature 3′-end of many chloroplast mRNAs is generated by the processing of the 3′-untranslated region (3′-UTR), which is a mechanism that involves the removal of a segment located downstream an inverted repeat sequence that forms a stem-loop structure. Nuclear-encoded chloroplast RNA binding proteins associate with the stem-loop to process the 3′-UTR or to influence mRNA stability. A spinach chloroplast processing extract (CPE) has been previously generated and used to in vitro dissect the biochemical mechanism underlying 3′-UTR processing. Being Arabidopsis thaliana an important genetic model, the development of a CPE allowing to correlate 3′-UTR processing activity with genes encoding proteins involved in this process, would be of great relevance. Here, we developed a purification protocol that generated an Arabidopsis CPE able to correctly process a psbA 3′-UTR precursor. By UV crosslinking, we characterized the protein patterns generated by the interaction of RNA binding proteins with Arabidopsis psbA and petD 3′-UTRs, finding that each 3′-UTR bound specific proteins. By testing whether Arabidopsis CPE proteins were able to bind spinach ortholog 3′-UTRs, we also found they were bound by specific proteins. When Arabidopsis CPE 3′-UTR processing activity on ortholog spinach 3′-UTRs was assessed, stable products appeared: for psbA, a smaller size product than the expected mature 3′-end, and for petD, low amounts of the expected product plus several others of smaller sizes. These results suggest that the 3′-UTR processing mechanism of these chloroplast mRNAs might be partially conserved in Arabidopsis and spinach.     

Structural basis of interactions between human glutamate carboxypeptidase II and its substrate analogs

Human glutamate carboxypeptidase II (GCPII) is involved in neuronal signal transduction and intestinal folate absorption by means of the hydrolysis of its two natural substrates, N-acetyl-aspartyl-glutamate and folyl-poly-γ-glutamates, respectively. During the past years, tremendous efforts have been made toward the structural analysis of GCPII. Crystal structures of GCPII in complex with various ligands have provided insight into the binding of these ligands, particularly to the S1′ site of the enzyme. In this article, we have extended structural characterization of GCPII to its S1 site by using dipeptide-based inhibitors that interact with both S1 and S1′ sites of the enzyme. To this end, we have determined crystal structures of human GCPII in complex with phosphapeptide analogs of folyl-γ-glutamate, aspartyl-glutamate, and γ-glutamyl-glutamate, refined at 1.50, 1.60, and 1.67 Å resolution, respectively. The S1 pocket of GCPII could be accurately defined and analyzed for the first time, and the data indicate the importance of Asn519, Arg463, Arg534, and Arg536 for recognition of the penultimate (i.e., P1) substrate residues. Direct interactions between the positively charged guanidinium groups of Arg534 and Arg536 and a P1 moiety of a substrate/inhibitor provide mechanistic explanation of GCPII preference for acidic dipeptides. Additionally, observed conformational flexibility of the Arg463 and Arg536 side chains likely regulates GCPII affinity toward different inhibitors and modulates GCPII substrate specificity. The biochemical experiments assessing the hydrolysis of several GCPII substrate derivatives modified at the P1 position, also included in this report, further complement and extend conclusions derived from the structural analysis. The data described here form an a solid foundation for the structurally aided design of novel low-molecular-weight GCPII inhibitors and imaging agents.     

Structural and functional interaction of (±)-2-(N-tert-butylamino)-3′-iodo-4′-azidopropiophenone,a photoreactive bupropion derivative,with nicotinic acetylcholine receptors

The pharmacological properties of (±)-2-(N-tert-butylamino)-3′-iodo-4′-azidopropiophenone [(±)-SADU-3-72], a photoreactive analog of bupropion (BP), were characterized at different muscle nicotinic acetylcholine receptors (AChRs) by functional and structural approaches. Ca²⁺ influx results indicate that (±)-SADU-3-72 is 17- and 6-fold more potent than BP in inhibiting human (h) embryonic (hα1β1γδ) and adult (hα1β1εδ) muscle AChRs, respectively. (±)-SADU-3-72 binds with high affinity to the [³H]TCP site within the resting or desensitized Torpedo AChR ion channel, whereas BP has higher affinity for desensitized AChRs. Molecular docking results indicate that both SADU-3-72 enantiomers interact with the valine (position 13′) and serine (position 6′) rings. However, an additional domain, between the outer (position 20′) and valine rings, is observed in Torpedo AChR ion channels. Our results indicate that the azido group of (±)-SADU-3-72 may enhance its interaction with polar groups and the formation of hydrogen bonds at AChRs, thus supporting the observed higher potency and affinity of (±)-SADU-3-72 compared to BP. Collectively our results are consistent with a model where BP/SADU-3-72 and TCP bind to overlapping sites within the lumen of muscle AChR ion channels. Based on these results, we believe that (±)-SADU-3-72 is a promising photoprobe for mapping the BP binding site, especially within the resting AChR ion channel.