Thiophilic adsorption of immunoglobulins--analysis of conditions optimal for selective immobilization and purification

Immunoglobulins have been selected by their general affinity for adjacent sulfone-thioether sulfur groups as a useful model system for the characterization of thiophilic interaction chromatography. Mercaptoethanol coupled to divinylsulfone-activated agarose (thiophilic or T-gel) provided an affinity matrix for the efficient and reversible immobilization of the immunoglobulins. The adsorption/desorption process was investigated as a function of protein concentration, temperature, flow rate, and pH in different concentrations of ammonium sulfate. Immobilization of these proteins was (as a function of pH) found to be both dependent and independent of the adsorption-promoting effects of water-structure-forming salts. Buffer conditions are recommended for the selective adsorption of immunoglobulins from unfractionated human serum. These results indicate that thiophilic interaction chromatography provides a new and effective alternative for the immobilization and purification of immunoglobulins and other proteins under conditions known to preserve structure and biological activity.     

Covalent chromatography and salt-promoted thiophilic adsorption

Covalent chromatography on 3-(2-pyridyl disulfido)-2-hydroxypropyl agarose, abbreviated PyS2, turns out to involve more complex interactions than has been supposed heretofore. Unexpectedly, the sorption is highly salt dependent. The relative affinities for serum proteins have therefore been determined in the absence and presence of different types of salts at different salt concentrations and with different degrees of ligand substitution on the adsorbent. In the presence of water-structuring salts the PyS2-gel shows an adsorption pattern for serum proteins resembling that of the "thiophilic" T-gel (J. Porath; F. Maisano, and M. Belew (1985) FEBS Lett. 185, 306-310). Superimposed on thiophilic adsorption we have found, as expected, covalent attachment of thiol-containing proteins. Also the thiol-disulfide exchange increases from 4-5% in the absence of potassium sulfate or sodium chloride up to about 40% of the applied serum proteins when such a water-structuring salt is present. We have thus shown that the interaction of a protein with the ligand is greatly facilitated by a water-structuring salt--and in this case the product is a covalently as well as a thiophilically immobilized protein. A cautious interpretation of protein interaction phenomena is justified whenever ligands containing sulfide, disulfide, or pi-electron-rich structures such as aromatic moieties are involved.     

Behaviour of human immunoglobulin G subclasses on thiophilic gels: comparison with hydrophobic interaction chromatography

We have used thiophilic and hydrophobic interaction chromatography in an attempt to obtain enriched human immunoglobulin G (IgG) subclasses from a therapeutic immunoglobulin preparation. Proteins were adsorbed on a thiophilic gel and on Phenyl-, Butyl-, or Octyl-Sepharose in 1 M ammonium sulphate. Elution with a decreasing salt gradient produced no marked subclass selectivity, except with Octyl-Sepharose, which yielded a poorly adsorbed fraction somewhat enriched in IgG2, representing ca. 20% of the total initial protein. Neither thiophilic nor hydrophobic interaction chromatography appear suitable for an efficient enrichment in subclasses, which all show a broad heterogeneity in their affinity for these columns. The influence of the starting salt concentration was also studied. With thiophilic gels, in the absence of ammonium sulphate, ca. 30% of the initial load was not adsorbed, and was found to be enriched in IgG2. At 2.5 and 5% ammonium sulphate, practically no adsorption occurred. At 7.5% ammonium sulphate, the non-adsorbed fraction was enriched in IgG3. With Phenyl-Sepharose, adsorption increased smoothly with the salt concentration. It is concluded that different forces come into play for adsorption on thiophilic gels at low and high salt concentration.     

Frontal gel chromatographic analysis of the interaction of a protein with self-associating ligands: aberrant saturation in the binding of flavins to bovine serum albumin

Frontal gel chromatography is an accurate method to obtain the total free ligand concentration of a protein-ligand mixture in which ligands self-associate. The average number of bound ligands per protein molecule is obtained as a function of the total free ligand concentration. The method was applied to the interaction of bovine serum albumin with self-associating flavins. The binding curves for FMN and FAD leveled off at about 0.7 and 0.5, respectively. These data were simulated well by a binding model where flavins undergo isodesmic indefinite self-association and the monomer alone binds to a single binding site of albumin. The isodesmic association constants of FMN and FAD were (1.7 +/- 0.1) x 10(2) and (2.2 +/- 0.3) x 10(2) M(-1), respectively. The binding constants of the monomer of FMN and FAD were (7.6 +/- 0.2) x 10(2) and (3.5 +/- 0.2) x 10(2) M(-1), respectively. FMN competitively inhibited the binding of FAD to albumin. The affinity to flavins was in the following order at pH 5.8: lumiflavin, FMN, riboflavin, and FAD. The SH modification and the binding of palmitate did not affect the FMN binding to bovine albumin at pH 5.8. As pH increased from 5.8 to 9.0, the affinity to FMN of bovine albumin decreased 3-fold, whereas that of human albumin increased about 80-fold. The present study clearly showed how isodesmic self-association of a ligand can cause apparent saturation of the interaction of a protein with the ligand at levels lower than 1.     

Immobilized metal affinity chromatography of monoclonal immunoglobulin M against mutant amidase from Pseudomonas aeruginosa

The chromatographic behavior of monoclonal antibodies (MAbs) of immunoglobulin (Ig) M class against mutant (T103I) amidase from Pseudomonas aeruginosa was investigated on immobilized metal chelates. The effect of ligand concentration, the length of spacer arm, and the nature of metal ion were investigated in immobilized metal affinity chromatography (IMAC). The MAbs against mutant amidase adsorbed to Cu(II), Ni(II), Zn(II), Co(II), and Ca(II)-iminodiacetic acid (IDA) agarose columns. The increase in ligand concentration (epichlorohydrin: 30-60 and 1,4-butanediol-diglycidyl ether: 16-36) resulted in higher adsorption to IgM into immobilized metal chelates. The length of spacer arm was found to affect protein adsorption, as longer spacer arm (i.e., 1,4-butanediol-diglycidyl ether) increased protein adsorption of immobilized metal chelates. The adsorption of IgM onto immobilized metal chelates was pH dependent because an increase in the binding of IgM was observed as the pH varied from 6.0 to 8.0. The adsorption of IgM to immobilized metal chelates was the result of coordination of histidine residues to metal chelates that are available in the third constant domain of heavy chain (CH3) of immunoglobulins, as the presence of imidazole (5 mM) in the equilibration buffer abolished the adsorption of IgM to the column. The combination of tailor-made stationary phases for IMAC and a correct design of the adsorption parameters permitted to devise a one-step purification procedure for IgM. Culture supernatants containing IgM against mutant amidase (T103I) were purified either by IMAC on EPI-60-IDA-Co (II) column or by gel filtration chromatography on Sephacryl S-300HR. The specific content of IgM and final recovery of antibody activity exhibited similar values for both purification schemes. The purified preparations of IgM obtained by both schemes were apparently homogeneous on native polyacrylamide gel electrophoresis with a Mr of 851,000 Da. The results presented in this work strongly suggest that one-step purification of IgM by IMAC is a cost-effective and processcompatible alternative to other types of chromatography.     

Thiophilic adsorption chromatography: purification of Equ c2 and Equ c3, two horse allergens from horse sweat

Purification of two allergens from horse (Equus caballus) sweat, Equ c2 and Equ c3, by means of salt-promoted chromatography on a “thiophilic” (T-gel) adsorbent is described. Immobilization of these proteins was found to be dependent on the presence of water-structure-forming salts where the ammonium sulphate concentration in the equilibration buffer was 2 M. Equ c2 showed higher affinity towards the thiophilic matrix than Equ c3. Their molecular mass (M_r) values established by SDS–polyacrylamide gel electrophoresis were for Equ c2 ≈17 000 and for Equ c3 ≈16 000, and both proteins showed a low isoelectric point of ≈3.8. Their allergenic properties were also investigated using sera from horse-sensitized patients, where it was demonstrated that these proteins exhibited an IgE antibody binding capacity. In this report we show the broad potential applications of thiophilic adsorption chromatography for the efficient purification of allergens.     

A combination of cation exchange and ligand-affinity chromatography for purification of two molecular species of the folate binding protein in human milk,one equipped with a hydrophobic glycosyl phosphatidylinositol tail: characterization of hydrophobicity and electrical charge

Cation exchange chromatography combined with ligand (methotrexate) affinity chromatography on a column desorbed with a pH-gradient was used for separation and large scale purification of two folate binding proteins in human milk. One of the proteins, which had a molecular size of 27 kDa on gel filtration and eluted from the affinity column at pH 5-6 was a cleavage product of a 100 kDa protein eluted at pH 3-4 as evidenced by identical N-terminal amino acid sequences and a reduction in the molecular size of the latter protein to 27 kDa after cleavage of its hydrophobic glycosylphosphatidyl-inositol tail that inserts into Triton X-100 micelles. Chromatofocusing showed that both proteins possessed multiple isoelectric points within the pH range 7-9. The 100 kDa protein exhibited a high affinity to hydrophobic interaction chromatographic gels, whereas this was only the case with unliganded forms of the 27 kDa protein indicative of a decrease in the hydrophobicity of the protein after ligand binding.     

Examination of the protein binding behaviour of immobilised copper (II)-2,6-diaminomethylpyridine and its application in the immobilised metal ion affinity chromatographic separation of several human serum proteins.

A new metal ion chelator has been developed for use in the immobilised metal ion affinity chromatography (IMAC) of proteins. The aromatic tridentate ligand 2,6-diaminomethylpyridine (bisampyr), 1, was prepared as the dihydrochloride salt, via a two step synthesis from 2,6-pyridinedimethanol, 2, and immobilised onto Sepharose CL-4B through an epoxide coupling procedure. The resulting sorbent was chelated with Cu2+ ions to a density of 420 micromol Cu2+ ions per g gel and then characterised by frontal analysis using the protein, horse heart myoglobin (HMYO), at pH 7.0 and 9.0. From the resulting adsorption isotherms, the adsorption capacity, qm, for HMYO at pH 7.0 and pH 9.0 with the immobilised Cu2+-bisampyr Sepharose sorbent was found to be 1.27 micromol protein/g gel and 1.43 micromol protein/g gel, whilst the corresponding dissociation constants, K(D)s, were 18.0 x 10(-6) M and 16.0 x 10(-6) M respectively. The results confirm that the HMYO-Cu2+-bisampyr complex had similar stability at these pH values. This finding is in contrast with the situation observed with some other commonly used IMAC chelating ligates such as Cu2+-iminodiacetic acid (Cu2+-IDA) or Cu2+-nitrilotriacetic acid (Cu2+-NTA). Using human serum proteins, the interactive properties of the immobilised Cu2+-bisampyr Sepharose sorbent were further characterised at pH 5.0, 7.0 and 9.0 with specific reference to the binding behaviour of albumin, transferrin, and alpha2-macroglobulin.     

Investigations on the specificity of thiophilic interaction for monoclonal antibodies of different subclasses

A comparative study was carried out to investigate the influence of different mouse antibody subclasses on the chromatographic behaviour on thiophilic supports. Cell-free supernatants from different mouse-mouse hybridoma cultures in a standard medium were purified on thiophilic agarose and Fractogel EMD TA. The adsorption capacities and purification factors were monitored under optimised adsorption conditions. The different isotypes did not differ significantly regarding capacity of the thiophilic matrix, but the purity of the eluted antibody fractions was significantly lower for the IgG_2a subclass compared to all other murine antibodies. A significant copurification of proteins from cell culture supernatant with antibodies of the IgG_2a subclass indicated a restriction in the universal nature of thiophilic interaction.     

Immobilized metal affinity chromatography of monoclonal immunoglobulin M against mutant amidase from Pseudomonas aeruginosa

The chromatographic behavior of monoclonal antibodies (MAbs) of immunoglobulin (Ig) M class against mutant (T103I) amidase from Pseudomonas aeruginosa was investigated on immobilized metal chelates. The effect of ligand concentration, the length of spacer arm, and the nature of metal ion were investigated in immobilized metal affinity chromatography (IMAC). The MAbs against mutant amidase adsorbed to Cu(II), Ni(II), Zn(II), Co(II), and Ca(II)-iminodiacetic acid (IDA) agarose columns. The increase in ligand concentration (epichlorohydrin: 30–60 and 1,4-butanediol-diglycidyl ether: 16–36) resulted in higher adsorption to IgM into immobilized metal chelates. The length of spacer arm was found to affect protein adsorption, as longer spacer arm (i.e., 1,4-butanediol-diglycidyl ether) increased protein adsorption of immobilized metal chelates. The adsorption of IgM onto immobilized metal chelates was pH dependent because an increase in the binding of IgM was observed as the pH varied from 6.0 to 8.0. The adsorption of IgM to immobilized metal chelates was the result of coordination of histidine residues to metal chelates that are available in the third constant domain of heavy chain (CH3) of immunoglobulins, as the presence of imidazole (5 mM) in the equilibration buffer abolished the adsorption of IgM to the column. The combination of tailor-made stationary phases for IMAC and a correct design of the adsorption parameters permitted to devise a one-step purification procedure for IgM. Culture supernatants containing IgM against mutant amidase (T103I) were purified either by IMAC on EPI-60-IDA-Co (II) column or by gel filtration chromatography on Sephacryl S-300HR. The specific content of IgM and final recovery of antibody activity exhibited similar values for both purification schemes. The purified preparations of IgM obtained by both schemes were apparently homogeneous on native polyacrylamide gel electrophoresis with a M _r of 851,000 Da. The results presented in this work strongly suggest that one-step purification of IgM by IMAC is a cost-effective and process-compatible alternative to other types of chromatography.     

New hydrophobic charge-induction resin with 2-mercaptoimidazole as the ligand and its separation characteristics for porcine IgG

New hydrophobic charge-induction chromatography (HCIC) resin coupled with 2-mercaptoimidazole (MI) as the ligand was prepared and used to purify IgG from porcine plasma. The cellulose matrix was activated by divinylsulfone (DVS), and was then coupled with MI as the functional ligand. The reaction conditions were optimized as pH: 11, volume ratio of DVS to matrix: 1.0, reaction time: 4 h. The ligand density reached about 100 μmol/mL gel. The adsorption isotherms of porcine IgG was determined at different pH values, and high saturated adsorption capacities of 78.02 mg IgG/mL gel were found at pH 8. The adsorption of IgG showed a typical pHdependent property of HCIC, and the adsorption capacity decreased significantly in acidic conditions. The prepared resin was used to separate IgG from porcine plasma. After precipitating the fibrinogen by salting-out, the supernatant was loaded onto the column at pH 7 and the elution pH was optimized. The results indicated that acidic elution pH was necessary to recover the IgG. The purity of IgG in the elution fractions was in the range of 81 ～ 90%, which demonstrated that HCIC with the new ligand showed the excited separation performs and is a potential effective technique to purify IgG from the complex feedstock.     

Purification and properties of Saccharomyces cerevisiae acetolactate synthase from recombinant Escherichia coli

The yeast ilv2 gene, encoding acetolactate synthase, was subcloned in an Escherichia coli expression vector. Although a major part of the acetolactate synthase synthesized by E. coli cells harbouring this vector was packaged into protein inclusion bodies, we used these recombinant E. coli cells to produce large quantities of the yeast enzyme. The yeast acetolactate synthase was purified to homogeneity using first streptomycin and ammonium sulfate precipitations, followed by T-gel thiophilic interaction, Sephacryl S-300 gel filtration, Mono Q anion exchange, and Superose 12 gel filtration chromatography. SDS/PAGE and gel filtration of the purified enzyme showed that it is a dimer composed of two subunits, each with the molecular mass of 75 kDa. The purified yeast acetolactate synthase was further characterized with respect to pH optimum, dependence of the substrate, pyruvate, and requirements of the cofactors, thiamin diphosphate, Mg2+, and FAD.     

Novel heterocyclic ligands for the thiophilic purification of antibodies

Novel thiophilic ligands based on mercaptoheterocycles were synthesized for use in one-step purification of antibodies. In order to better characterize these new structures, affinity constants were measured, as well as the influence of pH and salt on adsorption and elution. The ligand concentration was optimized for efficient and fast adsorption and elution of antibodies from ascites and serum. The purification of antibodies from cell culture supernatant proved difficult due the indicator phenol red of the growth media.     

Optimizing dye-ligand density with molecular analysis for affinity chromatography of rabbit muscle L-lactate dehydrogenase

Ligand density is an important factor in determining the binding capacity and separation efficiency for affinity chromatography. A molecular analysis method based on the three-dimensional structure of protein and protein-ligand interactions was introduced to optimize the dye-ligand density for target protein separation. Expanded-bed adsorption (EBA) of L-lactate dehydrogenase (LDH) from rabbit muscle crude extract with Procion Red HE-3B as the dye-ligand was used as the model. After the analysis of LDH three-dimensional molecular structure and dye-protein interaction modes, the rational dye-ligand distance was predicted at about 20 A for efficiently binding LDH. A series of dye-ligand adsorbents with different ligand densities were prepared, and the isotherm adsorption equilibria of LDH were measured. High adsorption capacity of LDH was achieved at about 1600 U/mL adsorbent. Packed-bed chromatography was performed, and the elution effects were investigated. Finally, an EBA process was achieved to capture the LDH directly from rabbit muscle crude extract. The method established in the present work could be expanded to guide the screening of ligand density for other affinity chromatographic processes.     

Protein adsorption onto monoliths: A surface energetics study

This part of work was done to explore the basic understanding of the adsorption chromatography by determining the interaction of selected model proteins (n = 5) to monolithic chromatographic materials, with varying densities of butyl and phenyl ligands. Surface energetics approach was applied to study the interaction behavior. The physicochemical properties of the proteins and monolithic chromatographic materials were explored by contact angle and zeta potential values. These values were used to study protein to monolith interaction under various operating conditions. Surface energetics approach allowed the calculation of interaction energy as a function of distance, i.e. energy minimum values. Calculations were performed at various conditions to analyze the effect of major operating parameters on the interaction strength. The interaction strength exposed the hydrophobic nature of the monoliths which increases with increasing ligand density. Further, interaction energy of proteins were higher with monolith with butyl ligand compared to monolith with phenyl ligand. For instance, lactoferrin interaction to monoliths with butyl represents more interaction, i.e. 24.38 kT as compared to monoliths with phenyl i.e. 23.28 kT, keeping lambda as 0.2 nm and salt concentration as 100 mM of ammonium sulphate. Hence, more energy and time will be consumed for elution of proteins immobilized to monoliths with butyl. Similarly, the effect of solid surface for proteins immobilization, effect of ligand density and effect of lambda showed some interesting insights on the interaction behavior. The knowledge generated from the present work will help in the basic understanding as well as development of an efficient, low cost downstream processing design and may mimic the real chromatographic experiments.     

蕲蛇蛇毒中一种新型金属蛋白酶AA-MP-I的纯化和表征

本研究通过嗜硫色谱、Sephadex G-75、蓝胶和POROS HQ20离子交换色谱,从蕲蛇蛇毒中分离得到一种新组分AA-MP-I。该酶为分子量22.9kDa的单体蛋白,等电点为5.55,不含中性糖基,N端序列为STE-FQRYMEIVIVVDHSMVK,结果表明其为新型P-I型金属蛋白酶,对温度敏感,具有抗凝血活性,40℃下抗凝血活性最强,具有出血毒性,无磷脂酶A2活性。     

Partial purification of a receptor for the adipokinetic hormones from Musca autumnalis face flies.

Partial purification of the receptors for the neurohormones, diptera corpora cardiaca factors 1 and 2 (DCC1 and DCC2) was achieved. Receptor proteins were obtained from the abdomens of face fly, Musca autumnalis De Geer. Purification methods included detergent solubilization, affinity chromatography, and polyacrylamide gel electrophoresis. Analysis by gel electrophoresis has identified two proteins from this partial purification with relative molecular weights of 45 and 90 kD. A crude receptor preparation was used to develop a ligand binding assay with radiolabeled (tritiated and iodinated) DCC1. Ligand binding was inhibited by 90% when excess unlabeled DCC1 was added to the assay mixture. Ligand binding was optimum at pH 7.5. Binding saturation occurred at approximately 12 picomole radiolabeled ligand concentration. Because DCC1 and DCC2 have been shown to effect the lipid and trehalose levels in the insect an understanding of the neuropeptide-receptor interaction is important for the development of new methods of control of dairy and poultry muscoid flies.     

Structural analysis of glycosyl-phosphatidylinositol antigens of Leishmania major

Three glycosyl-phosphatidylinositol glycolipids recognized by antibodies from patients with cutaneous leishmaniasis were extracted from Leishmania major promastigotes by hexane:isopropanol and then purified by thin layer chromatography and LH-20 gel chromatography. Structural analysis was carried out using chemical analyses, fast atom bombardment mass spectrometry, and 1H NMR. The major structures deduced can be summarized as follows: (formula: see text) where n = 0, 1, 2; R1 = (CH2)23-CH3; R2 = (CH2)14-CH3 or (CH2)16-CH3. Alkyl-acyl substitutions in the glycerol backbone showed considerable heterogeneity. These three glycolipids belong to a relatively new class of compounds and may represent sequential steps in the biosynthesis of glycosyl-phosphatidylinositols which anchor proteins or other glycoconjugates to Leishmania cell membranes.     

Removal of heavy metals from water effluents using supermacroporous metal chelating cryogels

Applications of IDA in, for example, immobilized metal ion affinity chromatography for purification of His-tagged proteins are well recognized. The use of IDA as an efficient chelating adsorbent for environmental separations, that is, for the capture of heavy metals, is not studied. Adsorbents based on supermacroporous gels (cryogels) bearing metal chelating functionalities (IDA residues and ligand derived from derivatization of epoxy-cryogel with tris(2-aminoethyl)amine followed by the treatment with bromoacetic acid (defined as TBA ligand)) have been prepared and evaluated on capture of heavy metal ions. The cryogels were prepared in plastic carriers, resulting in desired mechanical stability and named as macroporous gel particles (MGPs). Sorption and desorption experiments for different metals (Cu2+, Zn2+, Cd2+, and Ni2+ with IDA adsorbent and Cu2+ and Zn2+ with TBA adsorbent) were carried out in batch and monolithic modes, respectively. Obtained capacities with Cu2+ were 74 μmol/mL (TBA) and 19 μmol/mL gel (IDA). The metal removal was higher for pH values between pH 3 and 5. Both adsorbents showed improved sorption at lower temperatures (10°C) than at higher (40°C) and the adsorption significantly dropped for the TBA adsorbent and Zn2+ at 40°C. Desorption of Cu2+ by using 1 M HCl and 0.1 M EDTA was successful for the IDA adsorbent whereas the desorption with the TBA adsorbent needs further attention. The result of this work has demonstrated that MGPs are potential treatment alternatives within the field of environmental separations and the removal of heavy metals from water effluents.     

Existence of a form of SV40 T antigen incapable of interacting with DNA

The interaction of SV40 T-antigen and viral DNA was studied by using adsorption of DNA-protein complexes on nitrocellulose filters. The T-antigen purification procedure included ion-exchange chromatography on DEAE-cellulose, selective adsorption of cellular proteins on single-stranded DNA-cellulose, chromatography on heparin-Sepharose and removal of cell proteins by an immunosorbent. Only the latter step allowed to remove the contamination of cellular DNA-binding proteins, judging from the reaction of T-antigen neutralization by specific antibodies. It was shown that T-antigen and cellular DNA-binding proteins interact with SV40 DNA at different values of pH, namely ah 6,0-6,4 and 7,9, respectively. The T-antigen obtained was passed through a column with native DNA-cellulose at pH and ionic strength values optimal for interaction with DNA. The bulk of T-antigen (30-40%) did not bind to native thymus DNA and did not interact with SV40 DNA. It is assumed that this fraction is a form of T-antigen, which undergoes structural or functional changes during specific interaction with viral or cellular DNAs.