Long-term performance of a plant microbial fuel cell with Spartina anglica

The plant microbial fuel cell is a sustainable and renewable way of electricity production. The plant is integrated in the anode of the microbial fuel cell which consists of a bed of graphite granules. In the anode, organic compounds deposited by plant roots are oxidized by electrochemically active bacteria. In this research, salt marsh species Spartina anglica generated current for up to 119 days in a plant microbial fuel cell. Maximum power production was 100 mW m⁻² geometric anode area, highest reported power output for a plant microbial fuel cell. Cathode overpotential was the main potential loss in the period of oxygen reduction due to slow oxygen reduction kinetics at the cathode. Ferricyanide reduction improved the kinetics at the cathode and increased current generation with a maximum of 254%. In the period of ferricyanide reduction, the main potential loss was transport loss. This research shows potential application of microbial fuel cell technology in salt marshes for bio-energy production with the plant microbial fuel cell.     

The sucrose fuel cell: Efficient biomass conversion using a microbial catalyst

Sucrose was used as a fuel in a thionine-mediated microbial fuel cell containingProteus vulgaris serving as the biocatalyst in the anode compartment. The measured yields show that under suitable conditions the substrate may be oxidised quantitatively to electricity and carbon dioxide.     

Understanding the Anodic Mechanism of a Seafloor Fuel Cell: Interactions Between Geochemistry and Microbial Activity

Seafloor fuel cells made with graphite electrodes generate electricity by promoting electron transfer in response to a natural voltage difference (−0.7 to −0.8 V) between anoxic sediments and overlying oxic seawater. Geochemical impacts of a seafloor fuel cell on sediment solids and porewaters were examined to identify the anodic mechanisms and substrates available for current production. In an estuarine environment with little dissolved sulfide, solid-phase acid volatile sulfide and Cr²⁺-reducible sulfur minerals decreased significantly toward the anode after 7 months of nearly continuous energy harvesting. Porewater iron and sulfate increased by millimolar amounts. Scanning electron microscope images showed a biofilm overcoating the anode, and electron microprobe analyses revealed accumulations of sulfur, iron, silicon and phosphorus at the electrode surface. Sulfur deposition was also observed on a laboratory fuel cell anode used to generate electricity with only dissolved sulfide as an electron donor. Moreover, current densities and voltages displayed by these purely chemical cells were similar to the values measured with field devices. These results indicate that electron transfer to seafloor fuel cells can readily result in the oxidation of dissolved and solid-phase forms of reduced sulfur producing mainly S⁰ which deposits at the electrode surface. This oxidation product is consistent with the observed enrichment of bacteria most closely related to Desulfobulbus/Desulfocapsa genera within the anode biofilm, and its presence is proposed to promote a localized biogeochemical cycle whereby biofilm bacteria regenerate sulfate and sulfide. This electron-shuttling mechanism may co-occur while these or other bacteria use the anode directly as a terminal electron acceptor.     

Electricity generation from wastewaters with starch as carbon source using a mediatorless microbial fuel cell

Microbial fuel cells represent a new method for producing electricity from the oxidation of organic matter. A mediatorless microbial fuel cell was developed using Escherichia coli as the active bacterial component with synthetic wastewater of potato extract as the energy source. The two-chamber fuel cell, with a relation of volume between anode and cathode chamber of 8:1, was operated in batch mode. The response was similar to that obtained when glucose was used as the carbon source. The performance characteristics of the fuel cell were evaluated with two different anode and cathode shapes, platinised titanium strip or mesh; the highest maximum power density (502mWm(-2)) was achieved in the microbial fuel cell with mesh electrodes. In addition to electricity generation, the MFC exhibited efficient treatment of wastewater so that significant reduction of initial oxygen demand of wastewater by 61% was observed. These results demonstrate that potato starch can be used for power generation in a mediatorless microbial fuel cell with high removal efficiency of chemical oxygen demand.     

Expression of serotonin derivative synthetic genes on a single self-processing polypeptide and the production of serotonin derivatives in microbes

Soils are rich in organics, particularly those that support growth of plants. These organics are possible sources of sustainable energy, and a microbial fuel cell (MFC) system can potentially be used for this purpose. Here, we report the application of an MFC system to electricity generation in a rice paddy field. In our system, graphite felt electrodes were used; an anode was set in the rice rhizosphere, and a cathode was in the flooded water above the rhizosphere. It was observed that electricity generation (as high as 6 mW/m², normalized to the anode projection area) was sunlight dependent and exhibited circadian oscillation. Artificial shading of rice plants in the daytime inhibited the electricity generation. In the rhizosphere, rice roots penetrated the anode graphite felt where specific bacterial populations occurred. Supplementation to the anode region with acetate (one of the major root-exhausted organic compounds) enhanced the electricity generation in the dark. These results suggest that the paddy-field electricity-generation system was an ecological solar cell in which the plant photosynthesis was coupled to the microbial conversion of organics to electricity.     

纳米材料修饰微生物燃料电池阳极的研究进展

阳极作为微生物燃料电池中的重要组成部分,其性能的高低显著影响着微生物燃料电池的产电性能。纳米材料具有导电性好、表面积大等优良特性。因此,纳米材料修饰阳极能够有效减小电极内阻、增大微生物的粘附量,从而显著提高微生物燃料电池的产电性能。本文首先简要介绍了微生物燃料电池中阳极修饰纳米材料的种类,然后重点归纳了不同纳米材料修饰阳极对微生物燃料电池产电性能的影响及其原因。最后对微生物燃料电池阳极修饰纳米材料和技术进行展望。     

Electricity generation by anaerobic bacteria and anoxic sediments from hypersaline soda lakes

Anaerobic bacteria and anoxic sediments from soda lakes produced electricity in microbial fuel cells (MFCs). No electricity was generated in the absence of bacterial metabolism. Arsenate respiring bacteria isolated from moderately hypersaline Mono Lake (Bacillus selenitireducens), and salt-saturated Searles Lake, CA (strain SLAS-1) oxidized lactate using arsenate as the electron acceptor. However, these cultures grew equally well without added arsenate using the MFC anode as their electron acceptor, and in the process oxidized lactate more efficiently. The decrease in electricity generation by consumption of added alternative electron acceptors (i.e. arsenate) which competed with the anode for available electrons proved to be a useful indicator of microbial activity and hence life in the fuel cells. Shaken sediment slurries from these two lakes also generated electricity, with or without added lactate. Hydrogen added to sediment slurries was consumed but did not stimulate electricity production. Finally, electricity was generated in statically incubated “intact” sediment cores from these lakes. More power was produced in sediment from Mono Lake than from Searles Lake, however microbial fuel cells could detect low levels of metabolism operating under moderate and extreme conditions of salt stress.     

Sustained generation of electricity by the spore-forming,Gram-positive, <Emphasis Type="Italic">Desulfitobacterium hafniense</Emphasis> strain DCB2

Desulfitobacterium hafniense strain DCB2 generates electricity in microbial fuel cells (MFCs) when humic acids or the humate analog anthraquinone-2,6-disulfonate (AQDS) is added as an electron-carrying mediator. When utilizing formate as fuel, the Gram-positive, spore-forming bacterium generated up to 400 mW/m² of cathode surface area in a single-chamber MFC with a platinum-containing air-fed cathode. Hydrogen, lactate, pyruvate, and ethanol supported electricity generation, but acetate, propionate, and butyrate did not. Scanning electron microscopy indicated that strain DCB2 colonized the surface of a current-generating anode but not of an unconnected electrode. The electricity was recovered fully within minutes after the exchange of the medium in the anode chamber and within a week after an exposure of a colonized anode to 90°C for 20 min. Of the six strains of Desulfitobacteria tested, all of which would reduce AQDS, only D. hafniense strain DCB2 continued to reduce AQDS and generate electricity for more than 24 h, indicating that reduction of the humate analog alone is insufficient to sustain electrode reduction.     

采用填充床阳极的甲醇生物燃料电池

燃料电池是将化学能转变为电能的装置,人们已经在无机物燃料电池方面取得了很大进展。现在以各种有机物为燃料的生物燃料电池受到了重视。自然界存在大量的微生物和酶,可以氧化各种有机物,因此在原理上可以构建许多采用天然原料为燃料的生物燃料电池。目前,生物燃料电池实用化的主要问题是所提供的电流密度低,通过使用介体可以提高电流密度,在这方面已经做了许多工作,本实验室也有类似的工     

Effect of bacterial cell size on electricity generation in a single-compartmented microbial fuel cell

A single-compartmented microbial fuel cell composed of a graphite felt anode modified with Neutral Red (NR-anode) and a porous Fe(II)-carbon cathode (FeC-cathode) were compared for electricity generation from Microbacterium sp. and Pseudomonas sp. under identical conditions. Pseudomonas sp. was more than four times the size of Microbacterium sp. based on SEM images. In cyclic voltammetry, the redox reaction between Microbacterium sp and electrode was three times the rate observed between Pseudomonas sp. and the electrode based on the Y-axis (current) variation of cyclic voltammogram. The electric power generated by Microbacterium sp. was approx 3–4 times higher than that with Pseudomonas sp. during incubation for more than 150 days in the fuel cell.     

Biofilm and Nanowire Production Leads to Increased Current in Geobacter sulfurreducens Fuel Cells

Geobacter sulfurreducens developed highly structured, multilayer biofilms on the anode surface of a microbial fuel cell converting acetate to electricity. Cells at a distance from the anode remained viable, and there was no decrease in the efficiency of current production as the thickness of the biofilm increased. Genetic studies demonstrated that efficient electron transfer through the biofilm required the presence of electrically conductive pili. These pili may represent an electronic network permeating the biofilm that can promote long-range electrical transfer in an energy-efficient manner, increasing electricity production more than 10-fold.     

Microbial fuel cell characterisation and evaluation of <Emphasis Type="Italic">Lysinibacillus macroides</Emphasis> MFC02 electrigenic capability

Microbial fuel cell (MFC) is the most prominent research field due to its capability to generate electricity by utilizing the renewable sources. In the present study, Two MFC designs namely, H type-Microbial fuel cell (HT-MFC) and U type-Microbial fuel cell (UT-MFC) were constructed based on standardized H shaped anode and cathode compartment as well as U shaped anode and cathode compartments, respectively. In order to lower the cost for MFC construction, Pencil graphite lead was used as electrode and salt agar as Proton exchange membrane. Results inferred that newly constructed UT-MFC showed high electron production when compared to the HT-MFC. UT-MFC displayed an output of about 377?±?18.85 mV (millivolts); whereas HT-MFC rendered only 237?±?11.85 mV (millivolts) of power generation, which might be due to the low internal resistance. By increasing the number of cathode in UT-MFC, power production was increased upto 313?±?15.65 mV in Open circuit voltage (OCV). Electrogenic bacteria namely, Lysinibacillus macroides (Acc. No. KX011879) rendered enriched power generation. The attachment of bacteria as a biofilm on pencil graphite lead was analyzed using fluorescent microscope and Scanning Electron Microscope (SEM). Based on our findings, it was observed that UT-MFC has a tendency to produce high electron generation using pencil graphite lead as the electrode material.     

A microbial fuel cell operating at low pH using the acidophile Acidiphilium cryptum

For the first time, a microbial fuel cell has been developed using an acidophile, Acidiphilium cryptum, as the anode biocatalyst. Electricity production using its natural electron acceptor, iron, as the electron mediating agent at pH values < or =4.0 was demonstrated. Accumulation of Fe(III) at the electrode, however, restricted current output. The combination of nitrilotriacetic acid and Phenosafranin as electron mediators increased the power output to 12.7 mW/m(2) in a two-chamber air-sparged fuel cell. Direct electron transfer from the microorganisms to the anode was also investigated but was not detected under the conditions studied.     

Bioanode for a microbial fuel cell based on Gluconobacter oxydans immobilized into a polymer matrix

Acetic acid bacteria Gluconobacter oxydans subsp. industrius RKM V-1280 were immobilized into a synthetic matrix based on polyvinyl alcohol modified with N-vinylpyrrolidone and used as biocatalysts for the development of bioanodes for microbial fuel cells. The immobilization method did not significantly affect bacterial substrate specificity. Bioanodes based on immobilized bacteria functioned stably for 7 days. The maximum voltage (fuel cell signal) was reached when 100–130 μM of an electron transport mediator, 2,6-dichlorophenolindophenol, was added into the anode compartment. The fuel cell signals reached a maximum at a glucose concentration higher than 6 mM. The power output of the laboratory model of a fuel cell based on the developed bioanode reached 7 mW/m² with the use of fermentation industry wastes as fuel.     

Lack of electricity production by Pelobacter carbinolicus indicates that the capacity for Fe(III) oxide reduction does not necessarily confer electron transfer ability to fuel cell anodes

The ability of Pelobacter carbinolicus to oxidize electron donors with electron transfer to the anodes of microbial fuel cells was evaluated because microorganisms closely related to Pelobacter species are generally abundant on the anodes of microbial fuel cells harvesting electricity from aquatic sediments. P. carbinolicus could not produce current in a microbial fuel cell with electron donors which support Fe(III) oxide reduction by this organism. Current was produced using a coculture of P. carbinolicus and Geobacter sulfurreducens with ethanol as the fuel. Ethanol consumption was associated with the transitory accumulation of acetate and hydrogen. G. sulfurreducens alone could not metabolize ethanol, suggesting that P. carbinolicus grew in the fuel cell by converting ethanol to hydrogen and acetate, which G. sulfurreducens oxidized with electron transfer to the anode. Up to 83% of the electrons available in ethanol were recovered as electricity and in the metabolic intermediate acetate. Hydrogen consumption by G. sulfurreducens was important for ethanol metabolism by P. carbinolicus. Confocal microscopy and analysis of 16S rRNA genes revealed that half of the cells growing on the anode surface were P. carbinolicus, but there was a nearly equal number of planktonic cells of P. carbinolicus. In contrast, G. sulfurreducens was primarily attached to the anode. P. carbinolicus represents the first Fe(III) oxide-reducing microorganism found to be unable to produce current in a microbial fuel cell, providing the first suggestion that the mechanisms for extracellular electron transfer to Fe(III) oxides and fuel cell anodes may be different.     

Effects of inoculation strategy and cultivation approach on the performance of microbial fuel cell using marine sediment as bio-matrix

Aims: To investigate the effects of inoculation strategy and cultivation approach on the performance of microbial fuel cell (MFC). Methods and Results: A dual‐chamber sediment fuel cell was set up fed with glucose under batch condition. At day 30, the supernatant consortium was partly transferred and used as inoculum for the evaluation of cultivation approach. Power output gradually increased to 9·9 mW m^?2 over 180 days, corresponding to coulombic efficiency (CE) of 29·6%. Separated biofilms attached anode enabled power output and CE dramatically up to 100·9 mW m^?2 and over 50%, respectively, whereas the residual sediment catalysed MFC gave a poor performance. MFC catalysed by in situ supernatant consortium demonstrated more than twice higher power than MFC catalysed by the supernatant consortium after Fe(OH)₃ cultivation. However, the re‐generation of biofilms from the latter largely enhanced the cell performance. Conclusions: MFC exhibited a more efficient inducement of electroactive consortium than Fe(OH)₃ cultivation. MFC performance varied depending on different inoculation strategies. Significance and Impact of the Study: This is the first time to study cultivation approach affecting electricity generation. In addition, anodic limitations of mass and electron transfer were discussed through MFC catalysed by sediment‐based bio‐matrix.     

Impact of electrode composition on electricity generation in a single-compartment fuel cell using Shewanella putrefaciens

The production of electricity by Shewanella putrefaciens in the absence of exogenous electron acceptors was examined in a single compartment fuel cell with different types of electrodes and varying physiological conditions. Electricity production was dependent on anode composition, electron donor type and cell concentration. A maximum current of 2.5 mA and a current density of 10.2 mW/m(2)electrode was obtained with a Mn(4+) graphite anode, 200 mM sodium lactate and a cell concentration of 3.9 g cell protein/ml. Current production by S. putrefaciens was enhanced 10-fold when an electron mediator (i.e., Mn(4+) or neutral red) was incorporated into the graphite anode.     

Electricity production from alkalophilic organisms

Selected strains of alkalophilicbacillus organisms showed a remarkable ability for reducing redox mediator reagents, and were used as biocatalysts in the anode compartment of a redox-mediated microbial fuel cell. Substantial generation of electricity from oxidation of glucose as the fuel-substrate was demonstrated, particularly at the optimum growth pH.     

Biofilm and nanowire production leads to increased current in Geobacter sulfurreducens fuel cells

Geobacter sulfurreducens developed highly structured, multilayer biofilms on the anode surface of a microbial fuel cell converting acetate to electricity. Cells at a distance from the anode remained viable, and there was no decrease in the efficiency of current production as the thickness of the biofilm increased. Genetic studies demonstrated that efficient electron transfer through the biofilm required the presence of electrically conductive pili. These pili may represent an electronic network permeating the biofilm that can promote long-range electrical transfer in an energy-efficient manner, increasing electricity production more than 10-fold.     

Electricity generation using p-nitrophenol as substrate in microbial fuel cell

The cell voltage and degradation rate of p-nitrophenol (PNP) were monitored in a two-chambered microbial fuel cell (MFC) system. Degradation metabolites in the anode solution of MFC were analyzed by gas chromatography–mass spectrometry (GC–MS). PNP was used as substrate by the MFC that was inoculated with anaerobic sludge. The results showed that electricity output increased with the PNP concentration increased, the MFC displayed a maximum power density of 1.778 mW m⁻² and a maximum PNP degradation rate of 64.69% when PNP was used as a sole substrate. However, the cell voltage and the PNP degradation rate with sodium acetate (402.3 mV and 95.96%) were higher than those fed with glucose (341.9 mV and 83.51%) when glucose and sodium acetate were used as a substrate, respectively. Furthermore, GC–MS analysis showed that the PNP was biodegraded completely after 142 h in the MFC. These results demonstrate that PNP can be used for electricity generation in MFC for practical applications of wastewater treatment.