Determination of the multiplicity of the silk fibroin gene and detection of fibroin gene-related DNA in the genome of Bombyx mori.

The number of silk fibroin genes per genome in the silkworm Bombyx mori has been determined by hybridization using fibroin [¹²⁵I]mRNA. The purified [¹²⁵I]mRNA had an oligonucleotide pattern after RNAase T₁ digestion which was characteristic of fibroin mRNA (Suzuki &; Brown, 1972) and it hybridized specifically to DNA with a G + C content expected for a fibroin gene. Thermal denaturations indicated that these hybrids were mismatched by about 3%, which probably indicates some variation among the sequences encoding the internal repetitions of the fibroin protein.The concentration of fibroin gene sequences in B. mori DNA was measured by saturation hybridization of [¹²⁵I]mRNA to filter bound DNA. The same saturation level of 1.8 × 10^?5 μg mRNA per μg DNA was calculated from data obtained with unfractionated DNA and with fibroin gene sequences which had been separated from bulk B. mori DNA by actinomycin $\text{D}\text{CsCl}$ centrifugation. Scatchard plots of the subsaturation data extrapolated to an identical saturation value. Internal reiteration of the fibroin mRNA molecule was apparent from the high association constant of hybridization. An exhaustive hybridization experiment showed that such repetitions comprise at least 90% of each mRNA molecule. The saturation value, in conjunction with the genome DNA content and the mRNA size, indicated the presence of only one fibroin gene per haploid B. mori genome.Hybridization of actinomycin $\text{D}\text{CsCl}$ fractionated DNA indicated that fibroin mRNA can form hybrids with DNA that bands with bulk B. mori DNA. These hybrids appear to involve DNA which is related to, but distinguishable from, true fibroin gene sequences. The fibroin gene-related sequences form mismatched hybrids with the mRNA, are much shorter than the fibroin gene and are dispersed in B. mori DNA of much lower G + C content, and there are many copies of these sequences per B. mori genome.     

In vivo analysis of fibroin heavy chain signal peptide of silkworm Bombyx mori using recombinant baculovirus as vector

In order to investigate the functional signal peptide of silkworm fibroin heavy chain (FibH) and the effect of N- and C-terminal parts of FibH on the secretion of FibH in vivo, N- and C-terminal segments of fibh gene were fused with enhanced green fluorescent protein (EGFP) gene. The fused gene was then introduced into silkworm larvae and expressed in silk gland using recombinant AcMNPV (Autographa californica multiple nuclear polyhedrosis virus) as vector. The fluorescence of EGFP was observed with fluorescence microscope. FibH-EGFP fusion proteins extracted from silk gland were analyzed by Western blot. Results showed that the two alpha helices within N-terminal 163 amino acid residues and the C-terminal 61 amino acid residues were not necessary for cleavage of signal peptide and secretion of the fusion protein into silk gland. Then the C-terminal 61 amino acid residues were substituted with a His-tag in the fusion protein to facilitate the purification. N-terminal sequencing of the purified protein showed that the signal cleavage site is between position 21 and 22 amino acid residues.     

The genes for silk fibroin in Bombyx mori

The genes for the protein silk fibroin were quantitated by hybridizaton of purified fibroin messenger RNA with the DNA from several tissues of the silk-worm Bombyx mori.     

Internal structure of the silk fibroin gene of Bombyx mori. I The fibroin gene consists of a homogeneous alternating array of repetitious crystalline and amorphous coding sequences

The DNA sequence orgainzation of the protein encoding region of the gene for silk fibroin has been analyzed. The accompanying paper (Manningm R. F., and Gage, L. P. (1980) J. Biol. Chem. 255, 9451-9457) shows that the total length of the gene, and its protein, as well as the pattern of restriction sites in the gene is highly polymorphic among inbred stocks of Bombyx mori, In this paper, those features of fibroin gene structure which are invariant among these alleles are presented. Fibroin is composed primarily of relatively short "crystalline" and "amorphous" peptides of known sequence whose arrangement in the protein is unknown. Knowledge of the codons most commonly used in fibroin mRNA allowed utilization of particular restriction inzymes as a means for determing the nature and organization of crystalline and amorphous coding sequences in the fibroin gene. Three restriction endonucleases were identified that cleve sequences coding for amorphous region peptides. Their cleavage pattern revelaed that the repetitive coding sequence of the gene core (approximately 15 kilobases) is divided into at least 10 large crystalline coding domains interrupted by smaller amorphous coding domains. Many restriction endoncleases do not cleave the fibroin core at all, three of them with four gase recognition sequences. Specific deductions as to codon usage and repetitive sequence homogeneity in the gene follow from these results. One novel finding is the rigorous exclusion of the glycine codon GGA prior to serine codons even though this glycine codon is used frequently prior to alanine codons. The sequence homogeneity and the regularly alternating arrangement of crystalline and amorphous coding sequences of the gene are discussed in terms of the function of fibroin protein and the evolution of highly repetitive DNA.     

Purification of the c-fos enhancer-binding protein.

We have purified the c-fos enhancer-binding protein from HeLa cell nuclear extracts. The key purification steps involved chromatography on a nonspecific DNA affinity column, from which binding activity and other protein were eluted at low salt concentrations, followed by chromatography on a specific oligonucleotide affinity column, from which the enhancer binding activity was specifically eluted at high salt concentrations. The purified protein had a strong affinity for the c-fos enhancer dyad symmetry sequence, with an equilibrium dissociation constant of 3.3 x 10(-11) M. This affinity was at least 50,000-fold stronger than that found for nonspecific DNA sequences.     

Purification of a cellular, double-stranded DNA-binding protein required for initiation of adenovirus DNA replication by using a rapid filter-binding assay.

A rapid and quantitative nitrocellulose filter-binding assay is described for the detection of nuclear factor I, a HeLa cell sequence-specific DNA-binding protein required for the initiation of adenovirus DNA replication. In this assay, the abundant nonspecific DNA-binding activity present in unfractionated HeLa nuclear extracts was greatly reduced by preincubation of these extracts with a homopolymeric competitor DNA. Subsequently, specific DNA-binding activity was detected as the preferential retention of a labeled 48-base-pair DNA fragment containing a functional nuclear factor I binding site compared with a control DNA fragment to which nuclear factor I did not bind specifically. This specific DNA-binding activity was shown to be both quantitative and time dependent. Furthermore, the conditions of this assay allowed footprinting of nuclear factor I in unfractionated HeLa nuclear extracts and quantitative detection of the protein during purification. Using unfrozen HeLa cells and reagents known to limit endogenous proteolysis, nuclear factor I was purified to near homogeneity from HeLa nuclear extracts by a combination of standard chromatography and specific DNA affinity chromatography. Over a 400-fold purification of nuclear factor I, on the basis of the specific activity of both sequence-specific DNA binding and complementation of adenovirus DNA replication in vitro, was affected by this purification. The most highly purified fraction was greatly enriched for a polypeptide of 160 kilodaltons on silver-stained sodium dodecyl sulfate-polyacrylamide gels. Furthermore, this protein cosedimented with specific DNA-binding activity on glycerol gradients. That this fraction indeed contained nuclear factor I was demonstrated by both DNase I footprinting and its function in the initiation of adenovirus DNA replication. Finally, the stoichiometry of specific DNA binding by nuclear factor I is shown to be most consistent with 2 mol of the 160-kilodalton polypeptide binding per mol of nuclear factor I-binding site.     

Purification of BBF, a DNA-binding protein recognizing a positive cis-acting element in the mouse alpha 1(III) collagen promoter.

A positive cis-acting element, the B element, located between -83 and -61 in the mouse alpha 1(III) collagen promoter, binds a factor present in nuclear extracts of NIH 3T3 fibroblasts and HeLa cells. We have purified this factor using ion exchange chromatography, sequence-specific DNA affinity chromatography, and sodium dodecyl sulfate-polyacrylamide gel fractionation. The DNA sequence used for the affinity chromatography was a single-base substitution in the B element that increased the stability of the B element-protein complex by 50%. Purification of the B element-binding factor (BBF) by DNA affinity chromatography resulted in the apparent loss of most or all of the DNA-binding activity of this factor. The DNA-binding activity could, however, be reconstituted by combining two chromatographic fractions: the high-salt eluate and the column flow-through. When the partially purified high-salt eluate was size-fractionated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis with subsequent renaturation of gel fractions from guanidine HCl, the purified BBF (apparent molecular weight of about 95,000) bound to the B element with high affinity. These results suggest that during DNA affinity purification of BBF a factor that inhibits BBF DNA binding was co-eluted with BBF. This inhibition of BBF DNA binding was reversed by the addition of the DNA affinity column flow-through. The binding of BBF to the B element of the mouse alpha 1(III) collagen promoter is therefore an apparently complex process involving interactions between BBF and other protein factors.     

Translation of silk fibroin messenger RNA in an Ehrlich ascites cell-free extract.

RNA identified by its base composition and T1 RNase oligonucleotide pattern as the message for silk fibroin was purified from mature posterior silk glands of Bombyx mori larvae and used to direct polypeptide synthesis in an Ehrlich ascites cell-free extract. Fibroin mRNA stimulated [3-H]alanine incorporation about 3- to 4-fold in the presence of 80 mM K+ and 4 mM Mg-2+. The stimulation was reduced in the presence of 5 times 10-minus 6 to 10-minus 4 M aurintricarboxylic acid, an inhibitor of the initiation of protein synthesis. The cell-free products were heterogeneous in size, including peptides as large as 100,000 daltons. They co-precipitated with carrier fibroin sequences after digestion with trypsin. A large fraction of the polypeptides synthesized in response to fibroin mRNA was precipitated by antiserum directed against amino acid sequences in noncrystalline region polypeptides of fibroin. Furthermore, after digestion with chymotrypsin, a major fraction of the cell-free products specifically co-precipitated with crystalline region sequences of native fibroin. The size and amino acid composition of the fibroin crystalline region polypeptides isolated from the cell-free products were similar to those from native fibroin.     

Overproduction in Escherichia coli and purification of Epstein-Barr virus EBNA-1

Epstein-Barr virus nuclear antigen 1 (EBNA-1) is a multi-functional protein of the Epstein-Barr virus (EBV). Due to its low abundance in EBV-transformed cells, overproduction in a foreign host is preferred to obtain purified EBNA-1 protein. The EBNA-1 gene possesses a large number of Escherichia coli rare codons (23%). By using E. coli BL21(DE3)Rosetta2 cells that augment the low-abundance tRNA genes, the expression level of EBNA-1 in E. coli was greatly enhanced. EBNA-1 was then purified by applying the whole cell extract soluble fraction to a Ni-NTA Superflow column and eluting with an imidazole gradient. The improved overexpression in E. coli followed by a one-step Ni-NTA purification resulted in a sufficient amount of pure EBNA-1 protein to test DNA binding activity, and prepare and test EBNA-1-specific monoclonal antibodies (mAbs).