Structural uncoupling between opposing domains of oxidized calmodulin underlies the enhanced binding affinity and inhibition of the plasma membrane Ca-ATPase

Stabilization of the plasma membrane Ca-ATPase (PMCA) in an inactive conformation upon oxidation of multiple methionines in the calcium regulatory protein calmodulin (CaM) is part of an adaptive cellular response to minimize ATP utilization and the generation of reactive oxygen species (ROS) under conditions of oxidative stress. To differentiate oxidant-induced structural changes that selectively modify the amino-terminal domain of CaM from those that modulate the conformational coupling between the opposing domains, we have engineered a tetracysteine binding motif within helix A in the amino-terminal domain of calmodulin (CaM) that permits the selective and rigid attachment of the conformationally sensitive fluorescent probe 4',5'-bis(1,3,2-dithioarsolan-2-yl)fluorescein-(1,2-ethanedithiol)(2) (FlAsH-EDT(2)). The position of the FlAsH label in the amino-terminal domain provides a signal for monitoring its binding to the CaM-binding sequence of the PMCA. Following methionine oxidation, there is an enhanced binding affinity between the amino-terminal domain and the CaM-binding sequence of the PMCA. To identify oxidant-induced structural changes, we used frequency domain fluorescence anisotropy measurements to assess the structural coupling between helix A and the amino- and carboxyl-terminal domains of CaM. Helix A undergoes large amplitude motions in apo-CaM; following calcium activation, helix A is immobilized as part of a conformational switch that couples the opposing domains of CaM to stabilize the high-affinity binding cleft associated with target protein binding. Methionine oxidation disrupts the structural coupling between opposing globular domains of CaM, without affecting the calcium-dependent immobilization of helix A associated with activation of the amino-terminal domain to promote high-affinity binding to target proteins. We suggest that this selective disruption of the structural linkage between the opposing globular domains of CaM relieves steric constraints associated with high-affinity target binding, permitting the formation of new contact interactions between the amino-terminal domain and the CaM-binding sequence that stabilizes the PMCA in an inhibited conformation.     

Helix A stabilization precedes amino-terminal lobe activation upon calcium binding to calmodulin

The structural coupling between opposing domains of CaM was investigated using the conformationally sensitive biarsenical probe 4,5-bis(1,3,2-dithioarsolan-2-yl)resorufin (ReAsH), which upon binding to an engineered tetracysteine motif near the end of helix A (Thr-5 to Phe-19) becomes highly fluorescent. Changes in conformation and dynamics are reflective of the native CaM structure, as there is no change in the (1)H- (15)N HSQC NMR spectrum in comparison to wild-type CaM. We find evidence of a conformational intermediate associated with CaM activation, where calcium occupancy of sites in the amino-terminal and carboxyl-terminal lobes of CaM differentially affect the fluorescence intensity of bound ReAsH. Insight into the structure of the conformational intermediate is possible from a consideration of calcium-dependent changes in rates of ReAsH binding and helix A mobility, which respectively distinguish secondary structural changes associated with helix A stabilization from the tertiary structural reorganization of the amino-terminal lobe of CaM necessary for high-affinity binding to target proteins. Helix A stabilization is associated with calcium occupancy of sites in the carboxyl-terminal lobe ( K d = 0.36 +/- 0.04 microM), which results in a reduction in the rate of ReAsH binding from 4900 M (-1) s (-1) to 370 M (-1) s (-1). In comparison, tertiary structural changes involving helix A and other structural elements in the amino-terminal lobe require calcium occupancy of amino-terminal sites (K d = 18 +/- 3 microM). Observed secondary and tertiary structural changes involving helix A in response to the sequential calcium occupancy of carboxyl- and amino-terminal lobe calcium binding sites suggest an important involvement of helix A in mediating the structural coupling between the opposing domains of CaM. These results are discussed in terms of a model in which carboxyl-terminal lobe calcium activation induces secondary structural changes within the interdomain linker that release helix A, thereby facilitating the formation of calcium binding sites in the amino-terminal lobe and linked tertiary structural rearrangements to form a high-affinity binding cleft that can associate with target proteins.     

Closer proximity between opposing domains of vertebrate calmodulin following deletion of Met(145)-Lys(148)

To investigate the structural linkage between the opposing globular domains in vertebrate calmodulin (CaM), we have constructed a CaM mutant (CaMX(145)) deficient in the last four amino acids between Met(145) and Lys(148) at the carboxyl terminal. Circular dichroism and fluorescence spectroscopic measurements were used to detect changes in the average secondary and tertiary structure of CaMX(145) in comparison to full-length CaM. Complementary measurements of the maximal calcium-binding stoichiometry and ability to activate the plasma membrane (PM) Ca-ATPase permit an assessment of the functional significance of observed structural changes. In comparison with native CaM, we find that CaMX(145) exhibits (i) a large reduction in alpha-helical content, (ii) a dramatic decrease in the average spatial separation between the opposing globular domains, (iii) the loss of one high-affinity calcium-binding site, and (iv) a diminished binding affinity for the PM-Ca-ATPase. Thus, the sequence near the carboxyl terminus functions to stabilize high-affinity calcium binding at one site and facilitates important intramolecular interactions that maintain CaM in an extended conformation. However, despite the large conformational changes resulting from deletion of the last four amino acids at the carboxyl terminal, CaMX(145) can fully activate the PM-Ca-ATPase. These results indicate that target protein binding can restore the nativelike structure critical to function, emphasizing that the structure of the central helix is not critical to CaM function under equilibrium conditions. Rather, the central helix functions to maintain the spatial separation between the opposing domains in CaM that may be critical to high-affinity binding and the rapid activation of the PM-Ca-ATPase, which are necessary for optimal calcium signaling. Thus, following initial association between CaM and target proteins, structural changes involving the carboxyl-terminal sequence have the potential to play an important role in triggering the structural collapse of CaM that facilitates the rapid and cooperative binding of the opposing globular domains with target proteins, which is important to high-affinity binding and rapid enzyme activation.     

Mutation of Tyr138 disrupts the structural coupling between the opposing domains in vertebrate calmodulin

We have used circular dichroism and frequency-domain fluorescence spectroscopy to determine how the site-specific substitution of Tyr138 with either Phe138 or Gln138 affects the structural coupling between the opposing domains of calmodulin (CaM). A double mutant was constructed involving conservative substitution of Tyr99 --> Trp99 and Leu69 --> Cys69 to assess the structural coupling between the opposing domains, as previously described [Sun, H., Yin, D., and Squier, T. C. (1999) Biochemistry 38, 12266-12279]. Trp99 acts as a fluorescence resonance energy transfer (FRET) donor in distance measurements to probe the conformation of the central helix. Cys69 provides a reactive group for the covalent attachment of 5-((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid (IAEDANS), which functions as a FRET acceptor and permits the measurement of the rotational dynamics of the amino-terminal domain. These CaM mutants demonstrate normal calcium-dependent gel-mobility shifts and changes in their near-UV CD spectra, have similar secondary structures to wild-type CaM following calcium activation, and retain the ability to fully activate the plasma membrane Ca-ATPase. The global folds, therefore, of both the carboxyl- and amino-terminal domains in these CaM mutants are similar to that of wild-type CaM. However, in comparison to wild-type CaM, the substitution of Tyr138 with either Phe138 or Gln138 results in (i) alterations in the average spatial separation and increases in the conformational heterogeneity between the opposing globular domains and (ii) the independent rotational dynamics of the amino-terminal domain. These results indicate that alterations in either the hydrogen bond between Tyr138 and Glu82 or contact interactions between aromatic amino acid side chains have the potential to initiate the structural collapse of CaM normally associated with target protein binding and activation.     

Calcium-dependent structural coupling between opposing globular domains of calmodulin involves the central helix.

We have used fluorescence spectroscopy to investigate the average structure and extent of conformational heterogeneity associated with the central helix in calmodulin (CaM), a sequence that contributes to calcium binding sites 2 and 3 and connects the amino- and carboxyl-terminal globular domains. Using site-directed mutagenesis, a double mutant was constructed involving conservative substitution of Tyr(99) --> Trp(99) and Leu(69) --> Cys(69) with no significant effect on the secondary structure of CaM. These mutation sites are at opposite ends of the central helix. Trp(99) acts as a fluorescence resonance energy transfer (FRET) donor in distance measurements of the conformation of the central helix. Cys(69) provides a reactive group for the covalent attachment of the FRET acceptor 5-((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid (IAEDANS). AEDANS-modified CaM fully activates the plasma membrane (PM) Ca-ATPase, indicating that the native structure is retained following site-directed mutagenesis and chemical modification. We find that the average spatial separation between Trp(99) and AEDANS covalently bound to Cys(69) decreases by approximately 7 +/- 2 A upon calcium binding. However, irrespective of calcium binding, there is little change in the conformational heterogeneity associated with the central helix under physiologically relevant conditions (i.e., pH 7.5, 0.1 M KCl). These results indicate that calcium activation alters the spatial arrangement of the opposing globular domains between two defined conformations. In contrast, under conditions of low ionic strength or pH the structure of CaM is altered and the conformational heterogeneity of the central helix is decreased upon calcium activation. These results suggest the presence of important ionizable groups that affect the structure of the central helix, which may play an important role in mediating the ability of CaM to rapidly bind and activate target proteins.     

Loss of conformational stability in calmodulin upon methionine oxidation.

We have used electrospray ionization mass spectrometry (ESI-MS), circular dichroism (CD), and fluorescence spectroscopy to investigate the secondary and tertiary structural consequences that result from oxidative modification of methionine residues in wheat germ calmodulin (CaM), and prevent activation of the plasma membrane Ca-ATPase. Using ESI-MS, we have measured rates of modification and molecular mass distributions of oxidatively modified CaM species (CaMox) resulting from exposure to H2O2. From these rates, we find that oxidative modification of methionine to the corresponding methionine sulfoxide does not predispose CaM to further oxidative modification. These results indicate that methionine oxidation results in no large-scale alterations in the tertiary structure of CaMox, because the rates of oxidative modification of individual methionines are directly related to their solvent exposure. Likewise, CD measurements indicate that methionine oxidation results in little change in the apparent alpha-helical content at 28 degrees C, and only a small (0.3 +/- 0.1 kcal mol(-1)) decrease in thermal stability, suggesting the disruption of a limited number of specific noncovalent interactions. Fluorescence lifetime, anisotropy, and quenching measurements of N-(1-pyrenyl)-maleimide (PMal) covalently bound to Cys26 indicate local structural changes around PMal in the amino-terminal domain in response to oxidative modification of methionine residues in the carboxyl-terminal domain. Because the opposing globular domains remain spatially distant in both native and oxidatively modified CaM, the oxidative modification of methionines in the carboxyl-terminal domain are suggested to modify the conformation of the amino-terminal domain through alterations in the structural features involving the interdomain central helix. The structural basis for the linkage between oxidative modification and these global conformational changes is discussed in terms of possible alterations in specific noncovalent interactions that have previously been suggested to stabilize the central helix in CaM.     

Concerted but noncooperative activation of nucleotide and actuator domains of the Ca-ATPase upon calcium binding

Calcium-dependent domain movements of the actuator (A) and nucleotide (N) domains of the SERCA2a isoform of the Ca-ATPase were assessed using constructs containing engineered tetracysteine binding motifs, which were expressed in insect High-Five cells and subsequently labeled with the biarsenical fluorophore 4',5'-bis(1,3,2-dithioarsolan-2-yl)fluorescein (FlAsH-EDT(2)). Maximum catalytic function is retained in microsomes isolated from High-Five cells and labeled with FlAsH-EDT(2). Distance measurements using the nucleotide analog 2',3'-O-(2,4,6-trinitrophenyl) adenosine 5'-triphosphate (TNP-ATP), which acts as a fluorescence resonance energy transfer (FRET) acceptor from FlAsH, identify a 2.4 A increase in the spatial separation between the N- and A-domains induced by high-affinity calcium binding; this structural change is comparable to that observed in crystal structures. No significant distance changes occur across the N-domain between FlAsH and TNP-ATP, indicating that calcium activation induces rigid body domain movements rather than intradomain conformational changes. Calcium-dependent decreases in the fluorescence of FlAsH bound, respectively, to either the N- or A-domains indicate coordinated and noncooperative domain movements, where both A- and N-domains display virtually identical calcium dependencies (i.e., K(d) = 4.8 +/- 0.4 microM). We suggest that occupancy of a single high-affinity calcium binding site induces the rearrangement of the A- and N-domains of the Ca-ATPase to form an intermediate state, which facilitates phosphoenzyme formation from ATP upon occupancy of the second high-affinity calcium site.     

The secondary structure of calcineurin regulatory region and conformational change induced by calcium/calmodulin binding

The protein serine/threonine phosphatase calcineurin (CN) is activated by calmodulin (CaM) in response to intracellular calcium mobilization. A widely accepted model for CN activation involves displacement of the CN autoinhibitory peptide (CN(467-486)) from the active site upon binding of CaM. However, CN activation requires calcium binding both to the low affinity sites of CNB and to CaM, and previous studies did not dissect the individual contributions of CNB and CaM to displacement of the autoinhibitory peptide from the active site. In this work we have produced separate CN fragments corresponding to the CNA regulatory region (CNRR(381-521), residues 381-521), the CNA catalytic domain truncated at residue 341, and the CNA-CNB heterodimer with CNA truncated at residue 380 immediately after the CNB binding helix. We show that the separately expressed regulatory region retains its ability to inhibit CN phosphatase activity of the truncated CN341 and CN380 and that the inhibition can be reversed by calcium/CaM binding. Tryptophan fluorescence quenching measurements further indicate that the isolated regulatory region inhibits CN activity by occluding the catalytic site and that CaM binding exposes the catalytic site. The results provide new support for a model in which calcium binding to CNB enables CaM binding to the CNA regulatory region, and CaM binding then instructs an activating conformational change of the regulatory region that does not depend further on CNB. Moreover, the secondary structural content of the CNRR(381-521) was tentatively addressed by Fourier transform infrared spectroscopy. The results indicate that the secondary structure of CNRR(381-521) fragment is predominantly random coil, but with significant amount of beta-strand and alpha-helix structures.     

Backbone dynamics of calmodulin studied by 15N relaxation using inverse detected two-dimensional NMR spectroscopy: the central helix is flexible.

The backbone dynamics of Ca(2+)-saturated recombinant Drosophila calmodulin has been studied by 15N longitudinal and transverse relaxation experiments, combined with 15N(1H) NOE measurements. Results indicate a high degree of mobility near the middle of the central helix of calmodulin, from residue K77 through S81, with order parameters (S2) in the 0.5-0.6 range. The anisotropy observed in the motion of the two globular calmodulin domains is much smaller than expected on the basis of hydrodynamic calculations for a rigid dumbbell type structure. This indicates that, for the purposes of 15N relaxation, the tumbling of the N-terminal (L4-K77) and C-terminal (E82-S147) lobes of calmodulin is effectively independent. A slightly shorter motional correlation time (tau c approximately 6.3 ns) is obtained for the C-terminal domain compared to the N-terminal domain (tau c approximately 7.1 ns), in agreement with the smaller size of the C-terminal domain. A high degree of mobility, with order parameters of approximately 0.5, is also observed in the loop that connects the first with the second EF-hand type calcium binding domain and in the loop connecting the third and fourth calcium binding domain.     

Fluorophore-assisted light inactivation of calmodulin involves singlet-oxygen mediated cross-linking and methionine oxidation

Fluorophore-assisted light inactivation (FALI) permits the targeted inactivation of tagged proteins and, when used with cell-permeable multiuse affinity probes (MAPs), offers important advantages in identifying physiological function, because targeted protein inactivation is possible with spatial and temporal control. However, reliable applications of FALI, also known as chromophore-assisted light inactivation (CALI) with fluorescein derivatives, have been limited by lack of mechanistic information regarding target protein sensitivity. To permit the rational inactivation of targeted proteins, we have identified the oxidizing species and the susceptibility of specific amino acids to modification using the calcium regulatory protein calmodulin (CaM) that, like many essential proteins, regulates signal transduction through the reversible association with a large number of target proteins. Following the covalent and rigid attachment of 4',5'-bis(1,3,2-dithioarsolan-2-yl)fluorescein (FlAsH) to helix A, we have identified light-dependent oxidative modifications of endogenous methionines to their corresponding methionine sulfoxides. Initial rates of methionine oxidation correlate with surface accessibility and are insensitive to the distance between the bound fluorophore and individual methionines, which vary between approximately 7 and 40 A. In addition, we observed a loss of histidines, as well as zero-length cross-linking with binding partners corresponding to the CaM-binding sites of smooth myosin light chain kinase and ryanodine receptor. Our results provide a rationale for proteomic screens using FALI to inhibit the function of many signaling proteins, which, like CaM, commonly present methionines at binding interfaces.     

Energetics of calmodulin domain interactions with the calmodulin binding domain of CaMKII

Calmodulin (CaM) is an essential eukaryotic calcium receptor that regulates many kinases, including CaMKII. Calcium‐depleted CaM does not bind to CaMKII under physiological conditions. However, binding of (Ca²⁺)₄‐CaM to a basic amphipathic helix in CaMKII releases auto‐inhibition of the kinase. The crystal structure of CaM bound to CaMKIIp, a peptide representing the CaM‐binding domain (CaMBD) of CaMKII, shows an antiparallel interface: the C‐domain of CaM primarily contacts the N‐terminal half of the CaMBD. The two domains of calcium‐saturated CaM are believed to play distinct roles in releasing auto‐inhibition. To investigate the underlying mechanism of activation, calcium‐dependent titrations of isolated domains of CaM binding to CaMKIIp were monitored using fluorescence anisotropy. The binding affinity of CaMKIIp for the domains of CaM increased upon saturation with calcium, with the C‐domain having a 35‐fold greater affinity than the N‐domain. Because the interdomain linker of CaM regulates calcium‐binding affinity and contribute to conformational change, the role of each CaM domain was explored further by investigating effects of CaMKIIp on site‐knockout mutants affecting the calcium‐binding sites of a single domain. Investigation of the thermodynamic linkage between saturation of individual calcium‐binding sites and CaM‐domain binding to CaMKIIp showed that calcium binding to Sites III and IV was sufficient to recapitulate the behavior of (Ca²⁺)₄‐CaM. The magnitude of favorable interdomain cooperativity varied depending on which of the four calcium‐binding sites were mutated, emphasizing differential regulatory roles for the domains of CaM, despite the high degree of homology among the four EF‐hands of CaM. Proteins 2009. © 2008 Wiley‐Liss, Inc.     

The plant plasma membrane Ca2+ pump ACA8 contains overlapping as well as physically separated autoinhibitory and calmodulin-binding domains

In plant Ca(2+) pumps belonging to the P(2B) subfamily of P-type ATPases, the N-terminal cytoplasmic domain is responsible for pump autoinhibition. Binding of calmodulin (CaM) to this region results in pump activation but the structural basis for CaM activation is still not clear. All residues in a putative CaM-binding domain (Arg(43) to Lys(68)) were mutagenized and the resulting recombinant proteins were studied with respect to CaM binding and the activation state. The results demonstrate that (i) the binding site for CaM is overlapping with the autoinhibitory region and (ii) the autoinhibitory region comprises significantly fewer residues than the CaM-binding region. In a helical wheel projection of the CaM-binding domain, residues involved in autoinhibition cluster on one side of the helix, which is proposed to interact with an intramolecular receptor site in the pump. Residues influencing CaM negatively are situated on the other face of the helix, likely to face the cytosol, whereas residues controlling CaM binding positively are scattered throughout. We propose that early CaM recognition is mediated by the cytosolic face and that CaM subsequently competes with the intramolecular autoinhibitor in binding to the other face of the helix.     

Insight into the activation mechanism of Bordetella pertussis adenylate cyclase by calmodulin using fluorescence spectroscopy.

The interaction of the adenylate cyclase catalytic domain (AC) of the Bordetella pertussis major exotoxin with its activator calmodulin (CaM) was studied by time-resolved fluorescence spectroscopy using three fluorescent groups located in different regions of AC: tryptophan residues (W69 and W242), a nucleotide analogue (3'-anthraniloyl-2'-deoxyadenosine 5'-triphosphate, Ant-dATP) and a cysteine-specific probe (acrylodan). CaM binding elicited large changes in the dynamics of W242, which dominates the fluorescence emission of both AC and AC-CaM, similar to that observed for isolated CaM-binding sequences of different lengths [Bouhss, A., Vincent, M., Munier, H., Gilles, A.M., Takahashi, M., Barzu, O., Danchin, A. & Gallay, J. (1996) Eur. J. Biochem.237, 619-628]. In contrast, Ant-dATP remains completely immobile and inaccessible to the solvent in both the AC and AC-CaM nucleotide-binding sites. As AC contains no cysteine residue, a single-Cys mutant at position 75 was constructed which allowed labeling of the catalytic domain with acrylodan. Its environment is strongly apolar and rigid, and only slightly affected by CaM. The protein's hydrodynamic properties were also studied by fluorescence anisotropy decay measurements. The average Brownian rotational correlation times of AC differed significantly according to the probe used (19 ns for W242, 25 ns for Ant-dATP, and 35 ns for acrylodan), suggesting an elongated protein shape (axial ratio of approximately 1.9). These values increased greatly with the addition of CaM (39 ns for W242, 60-70 ns for Ant-dATP and 56 ns for acrylodan). This suggests that (a) the orientation of the probes is altered with respect to the protein axes and (b) the protein becomes more elongated with an axial ratio of approximately 2.4. For comparison, the hydrodynamic properties of the anthrax AC exotoxin were computed by a mathematical approach (hydropro), which uses the 3D structure [Drum, C.L., Yan, S.-Z., Bard, J., Shen, Y.-Q., Lu, D., Soelalman, S., Grabarek, Z., Bohm, A. & Tang, W.-J. (2002) Nature (London)415, 396-402]. A change in axial ratio is also observed on CaM binding, but in the reverse direction from that for AC: from 1.7 to 1.3. The mechanisms of activation of the two proteins by CaM may therefore be different.     

Calcium-dependent stabilization of the central sequence between Met(76) and Ser(81) in vertebrate calmodulin

Spin-label electron paramagnetic resonance (EPR) provides optimal resolution of dynamic and conformational heterogeneity on the nanosecond time-scale and was used to assess the structure of the sequence between Met(76) and Ser(81) in vertebrate calmodulin (CaM). Previous fluorescence resonance energy transfer and anisotropy measurements indicate that the opposing domains of CaM are structurally coupled and the interconnecting central sequence adopts conformationally distinct structures in the apo-form and following calcium activation. In contrast, NMR data suggest that the opposing domains of CaM undergo independent rotational dynamics and that the sequence between Met(76) and Ser(81) in the central sequence functions as a flexible linker that connects two structurally independent domains. However, these latter measurements also resolve weak internuclear interactions that suggest the formation of transient helical structures that are stable on the nanosecond time-scale within the sequence between Met(76) and Asp(80) in apo-CaM (H. Kuboniwa, N. Tjandra, S. Grzekiek, H. Ren, C. B. Klee, and A. Bax, 1995, Nat. Struct. Biol. 2:768-776). This reported conformational heterogeneity was resolved using site-directed mutagenesis and spin-label EPR, which detects two component spectra for 1-oxyl-2,2,5,5-tetramethylpyrroline-3-methyl)-methanethiosulfonate spin labels (MTSSL) bound to CaM mutants T79C and S81C that include a motionally restricted component. In comparison to MTSSL bound within stable helical regions, the fractional contribution of the immobilized component at these positions is enhanced upon the addition of small amounts of the helicogenic solvent trifluoroethanol (TFE). These results suggest that the immobilized component reflects the formation of stable secondary structures. Similar spectral changes are observed upon calcium activation, suggesting a calcium-dependent stabilization of the secondary structure. No corresponding changes are observed in either the solvent accessibility to molecular oxygen or the maximal hyperfine splitting. In contrast, more complex spectral changes in the line-shape and maximal hyperfine splitting are observed for spin labels bound to sites that undergo tertiary contact interactions. These results suggest that spin labels at solvent-exposed positions within the central sequence are primarily sensitive to backbone fluctuations and that either TFE or calcium binding stabilizes the secondary structure of the sequence between Met(76) and Ser(81) and modulates the structural coupling between the opposing domains of CaM.     

Structure of the complex of calmodulin with the target sequence of calmodulin-dependent protein kinase I: studies of the kinase activation mechanism

Calcium-saturated calmodulin (CaM) directly activates CaM-dependent protein kinase I (CaMKI) by binding to a region in the C-terminal regulatory sequence of the enzyme to relieve autoinhibition. The structure of CaM in a high-affinity complex with a 25-residue peptide of CaMKI (residues 294-318) has been determined by X-ray crystallography at 1.7 A resolution. Upon complex formation, the CaMKI peptide adopts an alpha-helical conformation, while changes in the CaM domain linker enable both its N- and C-domains to wrap around the peptide helix. Target peptide residues Trp-303 (interacting with the CaM C-domain) and Met-316 (with the CaM N-domain) define the mode of binding as 1-14. In addition, two basic patches on the peptide form complementary charge interactions with CaM. The CaM-peptide affinity is approximately 1 pM, compared with 30 nM for the CaM-kinase complex, indicating that activation of autoinhibited CaMKI by CaM requires a costly energetic disruption of the interactions between the CaM-binding sequence and the rest of the enzyme. We present biochemical and structural evidence indicating the involvement of both CaM domains in the activation process: while the C-domain exhibits tight binding toward the regulatory sequence, the N-domain is necessary for activation. Our crystal structure also enables us to identify the full CaM-binding sequence. Residues Lys-296 and Phe-298 from the target peptide interact directly with CaM, demonstrating overlap between the autoinhibitory and CaM-binding sequences. Thus, the kinase activation mechanism involves the binding of CaM to residues associated with the inhibitory pseudosubstrate sequence.     

Calcium-dependent association of calmodulin with the C-terminal domain of the tetraspanin protein peripherin/rds

Peripherin/rds (p/rds), an integral membrane protein from the transmembrane 4 (TMF4) superfamily, possesses a multi-functional C-terminal domain that plays crucial roles in rod outer segment (ROS) disk renewal and structure. Here, we report that the calcium binding protein calmodulin (CaM) binds to the C-terminal domain of p/rds. Fluorescence spectroscopy reveals Ca2+-dependent association of CaM with a polypeptide corresponding to the C-terminal domain of p/rds. The fluorescence anisotropy of the polypeptide upon CaM titration yields a dissociation constant (KD) of 320 +/- 150 nM. The results of the fluorescence experiments were confirmed by GST-pull down analyses in which a GST-p/rds C-terminal domain fusion protein was shown to pull down CaM in a calcium-dependent manner. Moreover, molecular modeling and sequence predictions suggest that the CaM binding domain resides in a p/rds functional hot spot, between residues E314 and G329. Predictions were confirmed by peptide competition studies and a GST-p/rds C-terminal domain construct in which the putative Ca2+/CaM binding site was scrambled. This GST-polypeptide did not associate with Ca2+/CaM. This putative calmodulin domain is highly conserved between human, mouse, rat, and bovine p/rds. Finally, the binding of Ca2+/CaM inhibited fusion between ROS disk and ROS plasma membranes as well as p/rds C-terminal-domain-induced fusion in model membrane studies. These results offer a new mechanism for the modulation of p/rds function.     

Structure of a trapped intermediate of calmodulin: calcium regulation of EF-hand proteins from a new perspective

Calmodulin (CaM) is a multifunctional Ca2+-binding protein that regulates the activity of many enzymes in response to changes in the intracellular Ca2+ concentration. There are two globular domains in CaM, each containing a pair of helix-loop-helix Ca2+-binding motifs called EF-hands. Ca2+-binding induces the opening of both domains thereby exposing hydrophobic pockets that provide binding sites for the target enzymes. Here, I present a 2.4 A resolution structure of a calmodulin mutant (CaM41/75) in which the N-terminal domain is locked in the closed conformation by a disulfide bond. CaM41/75 crystallized in a tetragonal lattice with the Ca2+ bound in all four EF-hands. In the closed N-terminal domain Ca ions are coordinated by the four protein ligands in positions 1, 3, 5 and 7 of the loop, and by two solvent ligands. The glutamate side-chain in the 12th position of the loop (Glu31 in site I and Glu67 in site II), which in the wild-type protein provides a bidentate Ca2+ ligand, remains in a distal position. Based on a comparison of CaM41/75 with other CaM and troponin C structures a detailed two-step mechanism of the Ca2+-binding process is proposed. Initially, the Ca2+ binds to the N-terminal part of the loop, thus generating a rigid link between the incoming helix (helix A, or helix C) and the central beta structure involving the residues in the sixth, seventh and eighth position of the loop. Then, the exiting helix (helix B or helix D) rotates causing the glutamate ligand in the 12th position to move into the vicinity of the immobilized Ca2+. An adjustment of the phi, psi backbone dihedral angles of the Ile residue in the eighth position is necessary and sufficient for the helix rotation and functions as a hinge. The model allows for a significant independence of the Ca2+-binding sites in a two-EF-hand domain.     

Crystal structures of apocalmodulin and an apocalmodulin/SK potassium channel gating domain complex

Small conductance Ca2+-activated K+ channels (SK channels) are composed of the pore-forming alpha subunit and calmodulin (CaM). CaM binds to a region of the alpha subunit called the CaM binding domain (CaMBD), located intracellular and immediately C-terminal to the inner helix gate, in either the presence or absence of Ca2+. SK gating occurs when Ca2+ binds the N lobe of CaM thereby transmitting the signal to the attached inner helix gate to open. Here we present crystal structures of apoCaM and apoCaM/SK2 CaMBD complex. Several apoCaM crystal forms with multiple (12) packing environments reveal the same EF hand domain-swapped dimer providing potentially new insight into CaM regulation. The apoCaM/SK2 CaMBD structure, combined with our Ca2+/CaM/CaMBD structure suggests that Ca2+ binding induces folding and dimerization of the CaMBD, which causes large CaMBD-CaM C lobe conformational changes, including a >90 degrees rotation of the region of the CaMBD directly connected to the gate.     

Converting troponin C into calmodulin: effects of mutations in the central helix and of changes in temperature

Calmodulin (CaM) and troponin C (TnC) are the most similar members of EF-hand family and show few differences in the primary structure. Here, we use mutants of troponin that mimic calmodulin and changes in temperature to investigate the factors that determine their specificity as regulatory proteins. Using a double mutant of troponin that resembles calmodulin in lacking both the N-terminal helix and KGK(91-93) we observe a small difference from troponin in binding to the erythrocyte Ca(2+)-ATPase, and an improvement in enzyme activation. A triple mutant, where in addition, the residues 88-90 are replaced with the corresponding sequence from calmodulin is equivalent to calmodulin in maximal activation, and it restores protein ability to increase Ca(2+) affinity for the enzyme. However, this mutant also binds less tightly (1/100) than calmodulin. Remarkably, a decrease in temperature has a more marked effect in protein binding than either mutation, reducing the difference in affinities to 18-fold, but without any improvement in their ability to increase Ca(2+) affinity for the enzyme. Spectroscopic analysis of hydrophobic domain exposure in EF-hand proteins was carried out using 8-anilino-1-naphthalenesulfonic acid (ANS). The probe shows a much higher fluorescence when bound to the complex Ca(4)-calmodulin than to Ca(4)-troponin. Decreasing the temperature exposes additional hydrophobic regions of troponin. Changing the Mg(2+) concentration does not affect their bindings to the enzyme. It is suggested that the requirements for troponin to mimic calmodulin in binding to the target enzyme, and those for activating it, are met by different regions of the protein.     

Functional significance of the central helix in calmodulin

The 3-A crystal structure of calmodulin indicates that it has a polarized tertiary arrangement in which calcium binding domains I and II are separated from domains III and IV by a long central helix consisting of residues 65-92. To investigate the functional significance of the central helix, mutated calmodulins were engineered with alterations in this region. Using oligonucleotide-primed site-directed mutagenesis, Thr-79 was converted to Pro-79 to generate CaMPM. CaMPM was further mutated by insertion of Pro-Ser-Thr-Asp between Asp-78 and Pro-79 to yield CaMIM. Calmodulin, CaMPM, and CaMIM were indistinguishable in their ability to activate calcineurin and Ca2+-ATPase. All mutated calmodulins would also maximally activate cGMP-phosphodiesterase and myosin light chain kinase, however, the concentrations of CaMPM and CaMIM necessary for half-maximal activation (Kact) were 2- and 9-fold greater, respectively, than CaM23. Conversion of the 2 Pro residues in CaMIM to amino acids that predict retention of helical secondary structure did not restore normal calmodulin activity. To investigate the nature of the interaction between mutated calmodulins and target enzymes, synthetic peptides modeled after the calmodulin binding region of smooth and skeletal muscle myosin light chain kinase were prepared and used as inhibitors of calmodulin-dependent cGMP-phosphodiesterase. The data suggest that the different kinetics of activation of myosin light chain kinase by CaM23 and CaMIM are not due to differences in the ability of the activators to bind to the calmodulin binding site of this enzyme. These observations are consistent with a model in which the length but not composition of the central helix is more important for the activation of certain enzymes. The data also support the hypothesis that calmodulin contains multiple sites for protein-protein interaction that are differentially recognized by its multiple target proteins.