SNPstream UHT: ultra-high throughput SNP genotyping for pharmacogenomics and drug discovery

Single nucleotide polymorphism (SNP) genotyping is playing an increasing role in genome mapping, pharmacogenetic studies, and drug discovery. To date, genome-wide scans and studies involving thousands of SNPs and samples have been hampered by the lack of a system that can perform genotyping with cost-effective throughput, accuracy, and reliability. To address this need, Orrhid has developed an automated, ultra-high throughput system, SNPstream UHT, which uses multiplexed PCR in conjunction with our next generation SNP-IT tag array single base extension genotyping technology The system employs oligonucleotide microarrays manufactured in a 384-well format on a novel glass-bottomed plate. Multiplexed PCR and genotyping are performed in homogeneous reactions, and assay results are read by direct two-color fluorescence on the SNPstream UHTArray Imager. The systems flexibility enables large projects involving thousands of SNPs and thousands of samples as well as small projects that have hundreds of SNPs and hundreds of samples to be done cost effectively. We have successfully demonstrated this system in greater than 1,000,000 genotyping assays with >96% of samples giving genotypes with >99% accuracy     

A novel procedure for efficient genotyping of single nucleotide polymorphisms

Due to the surge in interest in using single nucleotide polymorphisms (SNPs) for genotyping a facile and affordable method for this is an absolute necessity. Here we introduce a procedure that combines an easily automatable single tube sample preparation with an efficient high throughput mass spectrometric analysis technique. Known point mutations or single nucleotide polymorphisms are easily analysed by this procedure. It starts with PCR amplification of a short stretch of genomic DNA, for example an exon of a gene containing a SNP. By shrimp alkaline phosphatase digest residual dNTPs are destroyed. Allele-specific products are generated using a special primer, a conditioned set of α-S-dNTPs and α-S-ddNTPs and a fresh DNA polymerase in a primer extension reaction. Unmodified DNA is removed by 5′-phosphodiesterase digestion and the modified products are alkylated to increase the detection sensitivity in the mass spectrometric analysis. All steps of the preparation are simple additions of solutions and incubations. The procedure operates at the lowest practical sample volumes and in contrast to other genotyping protocols with mass spectrometric detection requires no purification. This reduces the cost and makes it easy to implement. Here it is demonstrated in a version using positive ion detection on described mutations in exon 17 of the amyloid precursor protein gene and in a version using negative ion detection on three SNPs of the granulocyte-macrophage colony stimulating factor gene. Preparation and analysis of SNPs is shown separately and simultaneously, thus demonstrating the multiplexibility of this genotyping procedure. The preparation protocol for genotyping is adapted to the conditions used for the SNP discovery method by denaturing HPLC, thus demonstrating a facile link between protocols for SNP discovery and SNP genotyping. Results corresponded unanimously with the control sequencing. The procedure is useful for high throughput genotyping as it is required for gene identification and pharmacogenomics where large numbers of DNA samples have to be analysed. We have named this procedure the ‘GOOD Assay’ for SNP analysis.     

An efficient procedure for genotyping single nucleotide polymorphisms

Analysis of single nucleotide polymorphisms (SNPs) has been and will be increasingly utilized in various genetic disciplines, particularly in studying genetic determinants of complex diseases. Such studies will be facilitated by rapid, simple, low cost and high throughput methodologies for SNP genotyping. One such method is reported here, named tetra-primer ARMS-PCR, which employs two primer pairs to amplify, respectively, the two different alleles of a SNP in a single PCR reaction. A computer program for designing primers was developed. Tetra-primer ARMS-PCR was combined with microplate array diagonal gel electrophoresis, gaining the advantage of high throughput for gel-based resolution of tetra-primer ARMS-PCR products. The technique was applied to analyse a number of SNPs and the results were completely consistent with those from an independent method, restriction fragment length polymorphism analysis.     

Rapid method for detecting SNPs on agarose gels and its application in candidate gene mapping

TILLING (Targeting Induced Local Lesions IN Genomes) exploits the fact that CEL I endonuclease cleaves heteroduplexes at positions of single nucleotide or small indel mismatches. To detect single nucleotide polymorphisms (SNPs) across a population, DNA pools are created and a target locus under query is PCR-amplified and subjected to heteroduplex formation, followed by CEL I cleavage. Currently, the common method used to detect cleaved products is by polyacrylamide gel electrophoresis using a high-throughput genotyping platform. Exact SNPs are then determined by sequencing. We sought to simplify the detection of CEL I-cleaved products on conventional agarose gels to make the technique more accessible to collaborating partners in developing countries where access to instrumentation could be limiting. Here, we used a panel of stress-related genes to evaluate SNP detection across 48 rice genotypes by contrasting them individually against IR64 and Nipponbare. SNP detection calls corresponded perfectly with those obtained from the Li-Cor genotypers. We were able to detect SNPs in pools of eight DNA templates, suggesting that the agarose gel system could be used to screen for SNPs with comparable throughput as that of the Li-Cor genotypers and showed that the throughput can be increased by analyzing larger amplicons (∼3 kb). The agarose method offers a significant advantage by alleviating the need for labeled primers. We further demonstrated that the agarose method can be effectively used in gene mapping, an application particularly useful for parental lines with low levels of polymorphism. The lower cost and simplicity of the technique make it possible for broader applications of SNP-based markers for germplasm characterization and mapping studies.     

A High Throughput Single Nucleotide Polymorphism Multiplex Assay for Parentage Assignment in New Zealand Sheep

Accurate pedigree information is critical to animal breeding systems to ensure the highest rate of genetic gain and management of inbreeding. The abundance of available genomic data, together with development of high throughput genotyping platforms, means that single nucleotide polymorphisms (SNPs) are now the DNA marker of choice for genomic selection studies. Furthermore the superior qualities of SNPs compared to microsatellite markers allows for standardization between laboratories; a property that is crucial for developing an international set of markers for traceability studies. The objective of this study was to develop a high throughput SNP assay for use in the New Zealand sheep industry that gives accurate pedigree assignment and will allow a reduction in breeder input over lambing. This required two phases of development- firstly, a method of extracting quality DNA from ear-punch tissue performed in a high throughput cost efficient manner and secondly a SNP assay that has the ability to assign paternity to progeny resulting from mob mating. A likelihood based approach to infer paternity was used where sires with the highest LOD score (log of the ratio of the likelihood given parentage to likelihood given non-parentage) are assigned. An 84 “parentage SNP panel” was developed that assigned, on average, 99% of progeny to a sire in a problem where there were 3,000 progeny from 120 mob mated sires that included numerous half sib sires. In only 6% of those cases was there another sire with at least a 0.02 probability of paternity. Furthermore dam information (either recorded, or by genotyping possible dams) was absent, highlighting the SNP test’s suitability for paternity testing. Utilization of this parentage SNP assay will allow implementation of progeny testing into large commercial farms where the improved accuracy of sire assignment and genetic evaluations will increase genetic gain in the sheep industry.     

Use of genotyping by sequencing data to develop a high‐throughput and multifunctional SNP panel for conservation applications in Pacific lamprey

Next‐generation sequencing data can be mined for highly informative single nucleotide polymorphisms (SNPs) to develop high‐throughput genomic assays for nonmodel organisms. However, choosing a set of SNPs to address a variety of objectives can be difficult because SNPs are often not equally informative. We developed an optimal combination of 96 high‐throughput SNP assays from a total of 4439 SNPs identified in a previous study of Pacific lamprey (Entosphenus tridentatus) and used them to address four disparate objectives: parentage analysis, species identification and characterization of neutral and adaptive variation. Nine of these SNPs are F_ST outliers, and five of these outliers are localized within genes and significantly associated with geography, run‐timing and dwarf life history. Two of the 96 SNPs were diagnostic for two other lamprey species that were morphologically indistinguishable at early larval stages and were sympatric in the Pacific Northwest. The majority (85) of SNPs in the panel were highly informative for parentage analysis, that is, putatively neutral with high minor allele frequency across the species’ range. Results from three case studies are presented to demonstrate the broad utility of this panel of SNP markers in this species. As Pacific lamprey populations are undergoing rapid decline, these SNPs provide an important resource to address critical uncertainties associated with the conservation and recovery of this imperiled species.     

The use of genotyping by sequencing in blackcurrant (Ribes nigrum): developing high-resolution linkage maps in species without reference genome sequences

A genotyping by sequencing (GbS) approach is reported in blackcurrant (Ribes nigrum L.) using a de novo read assembly method developed because of the current absence of a reference genome sequence for this species. A new approach to single nucleotide polymorphism (SNP) genotype calling is described, where individual genotypes for a large number of SNPs were characterised from the GbS counts using a novel method based on a functional regression of major and minor allele read counts. The high-quality GbS SNPs were combined with SNPs and simple sequence repeats generated from other technologies to develop a linkage map with increased marker density and improved genome coverage, containing up to 204 SNPs on each linkage group. SNPs of lower quality were then located on the map using quantitative trait locus (QTL) interval mapping of the proportion of the major allele. Two QTL each for 100-berry weight and Brix scores, measured over three years, were identified using the map. The use of this approach to identify and map a significant number of novel SNPs in a woody species with hitherto limited genomic resources may have generic application to other under-resourced and minor species in the development of cost-effective and efficient high-density genetic maps.     

Multimarker analysis and imputation of multiple platform pooling-based genome-wide association studies

For many genome-wide association (GWA) studies individually genotyping one million or more SNPs provides a marginal increase in coverage at a substantial cost. Much of the information gained is redundant due to the correlation structure inherent in the human genome. Pooling-based GWA studies could benefit significantly by utilizing this redundancy to reduce noise, improve the accuracy of the observations and increase genomic coverage. We introduce a measure of correlation between individual genotyping and pooling, under the same framework that r(2) provides a measure of linkage disequilibrium (LD) between pairs of SNPs. We then report a new non-haplotype multimarker multi-loci method that leverages the correlation structure between SNPs in the human genome to increase the efficacy of pooling-based GWA studies. We first give a theoretical framework and derivation of our multimarker method. Next, we evaluate simulations using this multimarker approach in comparison to single marker analysis. Finally, we experimentally evaluate our method using different pools of HapMap individuals on the Illumina 450S Duo, Illumina 550K and Affymetrix 5.0 platforms for a combined total of 1 333 631 SNPs. Our results show that use of multimarker analysis reduces noise specific to pooling-based studies, allows for efficient integration of multiple microarray platforms and provides more accurate measures of significance than single marker analysis. Additionally, this approach can be extended to allow for imputing the association significance for SNPs not directly observed using neighboring SNPs in LD. This multimarker method can now be used to cost-effectively complete pooling-based GWA studies with multiple platforms across over one million SNPs and to impute neighboring SNPs weighted for the loss of information due to pooling.     

Typing single-nucleotide polymorphisms using a gel-based sequencer

Single-nucleotide polymorphisms (SNPs) are increasingly used as genetic markers. Although a high number of SNP-genotyping techniques have been described, most techniques still have low throughput or require major investments. For laboratories that have access to an automated sequencer, a single-base extension (SBE) assay can be implemented using the ABI SNaPshot™ kit. Here we present a modified protocol comprising multiplex template generation, multiplex SBE reaction, and multiplex sample analysis on a gel-based sequencer such as the ABI 377. These sequencers run on a Macintosh platform, but on this platform the software available for analysis of data from the ABI 377 has limitations. First, analysis of the size standard included with the kit is not facilitated. Therefore a new size standard was designed. Second, using Genotype (ABI), the analysis of the data is very tedious and time consuming. To enable automated batch analysis of 96 samples, with 10 SNPs each, we developed SNPtyper. This is a spreadsheet-based tool that uses the data from Genotyper and offers the user a convenient interface to set parameters required for correct allele calling. In conclusion, the method described will enable any lab having access to an ABI sequencer to genotype up to 1000 SNPs per day for a single experimenter, without investing in new equipment.     

Gene-centric characteristics of genome-wide association studies

Background

The high-throughput genotyping chips have contributed greatly to genome-wide association (GWA) studies to identify novel disease susceptibility single nucleotide polymorphisms (SNPs). The high-density chips are designed using two different SNP selection approaches, the direct gene-centric approach, and the indirect quasi-random SNPs or linkage disequilibrium (LD)-based tagSNPs approaches. Although all these approaches can provide high genome coverage and ascertain variants in genes, it is not clear to which extent these approaches could capture the common genic variants. It is also important to characterize and compare the differences between these approaches.

Methodology/Principal Findings

In our study, by using both the Phase II HapMap data and the disease variants extracted from OMIM, a gene-centric evaluation was first performed to evaluate the ability of the approaches in capturing the disease variants in Caucasian population. Then the distribution patterns of SNPs were also characterized in genic regions, evolutionarily conserved introns and nongenic regions, ontologies and pathways. The results show that, no mater which SNP selection approach is used, the current high-density SNP chips provide very high coverage in genic regions and can capture most of known common disease variants under HapMap frame. The results also show that the differences between the direct and the indirect approaches are relatively small. Both have similar SNP distribution patterns in these gene-centric characteristics.

Conclusions/Significance

This study suggests that the indirect approaches not only have the advantage of high coverage but also are useful for studies focusing on various functional SNPs either in genes or in the conserved regions that the direct approach supports. The study and the annotation of characteristics will be helpful for designing and analyzing GWA studies that aim to identify genetic risk factors involved in common diseases, especially variants in genes and conserved regions.     

Molecular haplotyping of tandem single nucleotide polymorphisms by allele-specific PCR

BARD1 Val507Met (1592A>G) is an interesting marker for association studies on cancer risk. However, studies are scarce in the literature, probably reflecting the methodological problem imposed by the fact that next to the 1592A>G stands the 1591C>T single nucleotide polymorphism (SNP). We have designed an allele-specific PCR method capable of molecular haplotyping tandem SNPs. In the tandem SNPs haplotyping assay (tSNPh), four reverse primers are designed to be perfect matches of each potential haplotype. The forward primer is labeled with a fluorochrome. PCR products are analyzed by capillary electrophoresis. Haplotyping is performed by size calling. To ascertain the accuracy and reproducibility of the assay, we measured the level of concordance with sequencing data in 124 samples. In vitro-generated templates have been used for further testing. We developed a novel and reliable assay that permits typing two SNPs directly adjacent to each other, avoiding mutual interferences. The method is amenable to automation and high throughput. We expect that this assay will contribute to clarifying the role of BARD1 in cancer susceptibility. In addition, we suggest that tandem SNPs are potentially interesting polymorphic markers in which molecular haplotyping can be performed easily.     

三色荧光技术在SNP检测中的应用

利用三色荧光标记的A、C、T双脱氧核苷酸单碱基延伸的方法结合编码寡核苷酸芯片技术检测单核苷酸多态性 (SNP)的基因型。以beta地中海贫血样本基因 (HBB基因 )突变作为模型的研究结果显示该方法能同时对多位点的SNP进行检测。     

Characterization of 13 single nucleotide polymorphism markers for chum salmon

We report the characterization of 13 single nucleotide polymorphism (SNP) genotyping assays for chum salmon (Oncorhynchus keta). These assays are based on the 5′‐nuclease reaction and thus facilitate high‐throughput genotyping with minimal optimization time. Because data generated using these markers may be transported and combined across laboratories, SNPs offer the potential to reduce the amount of redundant work being done in mixture and migratory studies of chum salmon.     

High-throughput SNP genotyping by single-tube PCR with Tm-shift primers

Despite many recent advances in high-throughput single nucleotide polymorphism (SNP) genotyping technologies, there is still a great need for inexpensive and flexible methods with a reasonable throughput. Here we report substantial modifications and improvements to an existing homogenous allele-specific PCR-based SNP genotyping method, making it an attractive new option for researchers engaging in candidate gene studies or following up on genome-wide scans. In this advanced version of the melting temperature (Tm)-shift SNP genotyping method, we attach two GC-rich tails of different lengths to allele-specific PCR primers, such that SNP alleles in genomic DNA samples can be discriminated by the Tms of the PCR products. We have validated 306 SNP assays using this method and achieved a success rate in assay development of greater than 83% under uniform PCR conditions. We have developed a standalone software application to automatically assign genotypes directly from melting curve data. To demonstrate the accuracy of this method, we typed 592 individuals for 6 SNPs and showed a high call rate (>98%) and high accuracy (>99.9%). With this method, 6-10,000 samples can be genotyped per day using a single 384-well real-time thermal cycler with 2-4 standard 384-well PCR instruments.     

A FRET-based analysis of SNPs without fluorescent probes

Fluorescence resonance energy transfer (FRET) is a simple procedure for detecting specific DNA sequences, and is therefore used in many fields. However, the cost is relatively high, because FRET-based methods usually require fluorescent probes. We have designed a cost-effective way of using FRET, and developed a novel approach for the genotyping of single nucleotide polymorphisms (SNPs) and allele frequency estimation. The key feature of this method is that it uses a DNA-binding fluorogenic molecule, SYBR Green I, as an energy donor for FRET. In this method, single base extension is performed with dideoxynucleotides labeled with an orange dye and a red dye in the presence of SYBR Green I. The dyes incorporated into the extended products accept energy from SYBR Green I and emit fluorescence. We have validated the method with ten SNPs, which were successfully discriminated by end-point measurements of orange and red fluorescence intensity in a microplate fluorescence reader. Using a mixture of homozygous samples, we also confirmed the potential of this method for estimation of allele frequency. Application of this strategy to large-scale studies will reduce the time and cost of genotyping a vast number of SNPs.     

Minimum sample sizes for population genomics: an empirical study from an Amazonian plant species

High‐throughput DNA sequencing facilitates the analysis of large portions of the genome in nonmodel organisms, ensuring high accuracy of population genetic parameters. However, empirical studies evaluating the appropriate sample size for these kinds of studies are still scarce. In this study, we use double‐digest restriction‐associated DNA sequencing (ddRADseq) to recover thousands of single nucleotide polymorphisms (SNPs) for two physically isolated populations of Amphirrhox longifolia (Violaceae), a nonmodel plant species for which no reference genome is available. We used resampling techniques to construct simulated populations with a random subset of individuals and SNPs to determine how many individuals and biallelic markers should be sampled for accurate estimates of intra‐ and interpopulation genetic diversity. We identified 3646 and 4900 polymorphic SNPs for the two populations of A. longifolia, respectively. Our simulations show that, overall, a sample size greater than eight individuals has little impact on estimates of genetic diversity within A. longifolia populations, when 1000 SNPs or higher are used. Our results also show that even at a very small sample size (i.e. two individuals), accurate estimates of F_ST can be obtained with a large number of SNPs (≥1500). These results highlight the potential of high‐throughput genomic sequencing approaches to address questions related to evolutionary biology in nonmodel organisms. Furthermore, our findings also provide insights into the optimization of sampling strategies in the era of population genomics.