The Influence of Water Activity and Temperature on Germination,Growth and Sporulation of <Emphasis Type="Italic">Stachybotrys chartarum</Emphasis> Strains

The objectives were to determine the influence of water activity (a_w, 0.997–0.92) and temperature (10–37°C) and their interactions on conidial germination, mycelial growth and sporulation of two strains of Stachybotrys chartarum in vitro on a potato dextrose medium. Studies were carried out by modifying the medium with glycerol and either spread plating with conidia to evaluate germination and germ tube extension or centrally inoculating treatment media for measuring mycelial growth rates and harvesting whole colonies for determining sporulation. Overall, germination of conidia was significantly influenced by a_w and temperature and was fastest at 0.997–0.98 a_w between 15 and 30°C with complete germination within 24 h. Germ tube extension was found to be most rapid at similar a_w levels and 25–30°C. Mycelial growth rates of both strains were optimal at 0.997 a_w between 25 and 30°C, with very little growth at 37°C. Sporulation was optimum at 30°C at 0.997 a_w. However, under drier conditions, this was optimum at 25°C. This shows that there are differences in the ranges of a_w x temperature for germination and growth and for sporulation. This may help in understanding the role of this fungal species in damp buildings and conditions under which immune-compromised patients may be at risk when exposed to such contaminants in the indoor air environment.     

Ochratoxin A production in aniseed-based media by selected fungal strains and in anise fruits (<Emphasis Type="Italic">Pimpinella anisum</Emphasis> L.)

The growth conditions and ochratoxin A (OTA) production of Aspergillus strains were studied in aniseed (Pimpinella anisum L.)-based media. The results showed that methanol/NaHCO₃ (50:50, v/v) mixture for extraction and competitive direct ELISA analytical method are capable of detecting low OTA concentrations in this raw material, which were confirmed by HPLC with fluorescence detection (R ² = 0.994). In aniseed meal extract agar artificially contaminated with selected fungi, the higher OTA values obtained were 283.8 ± 28.1 μg L^-1 for A. carbonarius and between 1.7 ± 0.1 μg L^-1 and 16.5 ± 12.8 μg L^-1 for A. steynii strains. While the optimal conditions of growth for A. carbonarius and A. steynii are 28°C and 0.98 a _w, the optimal production of OTA was observed at 0.99 a _w for both A. carbonarius and A. steynii but at 22°C and 28°C, respectively. Except in one sample, all the aniseed samples analysed were negative for OTA natural contamination. This study demonstrates that aniseed can be a matrix capable to contamination with OTA, at least produced by A. carbonarius and A. steynii strains, regardless of the antimicrobial properties of aniseed essential oil.     

Influence of water activity and temperature on in vitro growth of surface cultures of a Phoma sp. and production of the pharmaceutical metabolites, squalestatins S1 and S2

A Phoma sp., known to produce the pharmaceutically active metabolites squalestatin 1 (S1) and squalestatin 2 (S2), was cultured on malt-extract/agar (MEA) over a range of water activities (a _w, 0.995–0.90) and temperatures (10–35 °C) to investigate the influence on growth and metabolite production. Use of the ionic solute NaCl to adjust a _w resulted in significantly lower (P < 0.01) squalestatin yields than when the Phoma sp. was grown on MEA amended with the non-ionic solute glycerol. Water activity and temperature and their interactions were highly significant factors (P < 0.001) affecting growth of the Phoma sp., with optimum conditions of 0.998–0.980 a _w and 25 °C. Squalestatin production was similarly influenced by a _w, temperature, time and their interactions (P < 0.001). S1 and S2 production occurred over a narrower a _w and temperature range than growth, with a slightly lower optimum a _w range of 0.995–0.980 a _w. The optimum temperature for squalestatin production varied from 20 °C (S1) to 25 °C (S2) and yields of S2 were up to 1000 times lower than those of S1. The ratio of S1 and S2 produced by the Phoma sp. was influenced by a _w and temperature, with highest values at 0.99–0.98 a _w, and at 15 °C. Incubation times of 28 days gave highest yields of both S1 and S2. Up to 2000-fold increases in squalestatin yields were measured at optimum environmental conditions, compared to the unmodified MEA. This indicates the need to consider such factors in screening systems used to detect biologically active lead compounds produced by fungi. Received: 2 June 1997 / Received last revision: 6 November 1997 / Accepted: 7 November 1997     

Rapid solubilization of insoluble phosphate by a novel environmental stress-tolerant Burkholderia vietnamiensis M6 isolated from ginseng rhizospheric soil

We isolated and characterized novel insoluble phosphate (P)-solubilizing bacteria tolerant to environmental factors like high salt, low and high pHs, and low temperature. A bacterium M6 was isolated from a ginseng rhizospheric soil and confirmed to belong to Burkholderia vietnamiensis by BIOLOG system and 16S rRNA gene analysis. The optimal cultural conditions for the solubilization of P were 2.5% (w/v) glucose, 0.015% (w/v) urea, and 0.4% (w/v) MgCl₂·6H₂O along with initial pH 7.0 at 35°C. High-performance liquid chromatography analysis showed that B. vietnamiensis M6 produced gluconic and 2-ketogluconic acids. During the culture, the pH was reduced with increase in gluconic acid concentration and was inversely correlated with P solubilization. Insoluble P solubilization in the optimal medium was about 902 mg l⁻¹, which was approximately 1.6-fold higher than the yield in NBRIP medium (580 mg l⁻¹). B. vietnamiensis M6 showed resistance against different environmental stresses like 10–45°C, 1–5% (w/v) salt, and 2–11 pH range. The maximal concentration of soluble P produced by B. vietnamiensis M6 from Ca₃(PO₄)₂, CaHPO₄, and hydroxyapatite was 1,039, 2,132, and 1,754 mg l⁻¹, respectively. However, the strain M6 produced soluble P with 20 mg l⁻¹ from FePO₄ after 2 days and 100 mg l⁻¹ from AlPO₄ after 6 days, respectively. Our results indicate that B. vietnamiensis M6 could be a potential candidate for the development of biofertilizer applicable to environmentally stressed soil.     

Biosynthesis of Dibenzyl Trisulfide (DTS) from somatic embryos and rhizogenous/embryogenic callus derived from Guinea hen weed (<Emphasis Type="Italic">Petiveria alliacea</Emphasis> L<Emphasis Type="Italic">.</Emphasis>) leaf explants

A procedure for producing somatic embryos enriched with dibenzyl trisulfide (DTS) using a hormone-dependent culture system is reported for Petiveria alliacea L. (Guinea hen weed). Leaf explants were cultured on a Murashige and Skoog medium supplemented with a range of naphthaleneacetic acid (NAA) concentrations and a fixed concentration of benzyladenine (BAP) at 11.0 μM and sucrose or glucose at 30 g l⁻¹. Leaf explants cultured on all media types started to form callus at the cut surfaces of the discs 10–14 d after initiation. The type of sugar used influenced average fresh weight, the propensity to form roots, as well as the embryogenic response. The highest mean fresh weight (337.7 ± 26.18 mg) and mean root number (23.7 ± 1.69) was produced on media enriched with sucrose and supplemented with 53.7 μM NAA and 11.0 μM BAP. An ethanol extract of rhizogenic/embryogenic callus or somatic embryos was subjected to high-performance liquid chromatography analysis, which revealed the presence of DTS in both extracts. UV spectral analysis and the use of standard quantitation procedures showed that the quantity of DTS in the somatic embryo extract, at 0.16% (w/v), was approximately 30-fold higher than in rhizogenic/embryogenic callus (0.0055% w/v) of similar fresh weight. These results indicate that it is possible to biosynthesize approximately 6 mg of natural DTS from 3,808 mg of fresh somatic embryos within 10 wk from less than three leaf explants.     

Edible oil degradation by using yeast coculture of <Emphasis Type="Italic">Rhodotorula pacifica</Emphasis> ST3411 and <Emphasis Type="Italic">Cryptococcus laurentii</Emphasis> ST3412

To develop a microbial treatment of edible oil-contaminated wastewater, microorganisms capable of rapidly degrading edible oil were screened. The screening study yielded a yeast coculture comprising Rhodotorula pacifica strain ST3411 and Cryptococcus laurentii strain ST3412. The coculture was able to degrade efficiently even at low contents of nitrogen ([NH₄–N] = 240 mg/L) and phosphorus sources ([PO₄–P] = 90 mg/L). The 24-h degradation rate of 3,000 ppm mixed oils (salad oil/lard/beef tallow, 1:1 w/w) at 20°C was 39.8% ± 9.9% (means ± standard deviations of eight replicates). The highest degradation rate was observed at 20°C and pH 8. In a scaled-up experiment, the salad oil was rapidly degraded by the coculture from 671 ± 52.0 to 143 ± 96.7 ppm in 24 h, and the degradation rate was 79.4% ± 13.8% (means ± standard deviations of three replicates). In addition, a repetitive degradation was observed with the cell growth by only pH adjustment without addition of the cells.     

Synthesis of a citrulline-rich cyanophycin by use of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> ATCC 4359

Synthesis of cyanophycin (multi-l-arginyl-poly-l-aspartic acid, CGP) in recombinant organisms is an important option to obtain sufficiently large amounts of this polymer with a designed composition for use as putative precursors for biodegradable technically interesting chemicals. Therefore, derivates of CGP, harbouring a wider range of constituents, are of particular interest. As shown previously, cyanophycin synthetases with wide substrate ranges incorporate other amino acids than arginine. Therefore, using an organism, which produces the required supplement by itself, was the next logical step. Former studies showed that Pseudomonas putida strain ATCC 4359 is able to produce large amounts of l-citrulline from l-arginine. By expressing the cyanophycin synthetase of Synechocystis sp. PCC 6308, synthesis of CGP was observed in P. putida ATCC 4359. Using an optimised medium for cultivation, the strain was able to synthesise insoluble CGP amounting up to 14.7 ± 0.7% (w/w) and soluble CGP amounting up to 28.7 ± 0.8% (w/w) of the cell dry matter, resulting in a total CGP content of the cells of 43.4% (w/w). HPLC analysis of the soluble CGP showed that it was composed of 50.4 ± 1.3 mol % aspartic acid, 32.7 ± 2.8 mol % arginine, 8.7 ± 1.6 mol % citrulline and 8.3 ± 0.4 mol % lysine, whereas the insoluble CGP contained less than 1 mol % of citrulline. Using a mineral salt medium with 1.25 or 2% (w/v) sodium succinate, respectively, plus 23.7 mM l-arginine, the cells synthesised insoluble CGP amounting up to 25% to 29% of the CDM with only a very low citrulline content.     

Isolation,callus formation and plantlet regeneration from mesophyll protoplasts of <Emphasis Type="Italic">Tylophora indica</Emphasis> (Burm. f.) Merrill: an important medicinal plant

Protoplast culture and plant regeneration of an important medicinal plant Tylophora indica were achieved through callus regeneration. Protoplasts were isolated from leaf mesophyll cells and cultured at a density of 5 × 10⁵ protoplasts per gram fresh weight, which is required for the highest frequency of protoplast division (33.7%) and plating efficiency (9.3%). The first division was observed 2 d after plating and the second division after 4 d. Culture medium consists of Murashige and Skoog (MS) liquid medium with 4 μM 2,4-D, 0.4 M mannitol and 3% (w/v) sucrose with pH adjusted to 5.8. After 45 d of culture at 25°C in the dark, protoplasts formed colonies consisting of about 100 cells. The protoplast-derived microcalli were visible to the naked eye within 60 d of culture and reached a size of 0.2–0.4 mm in diameter after 90 d. Calli of 0.2–0.4-mm size were transferred to MS medium supplemented with 2,4-D (4 μM), 3% (w/v) sucrose and 0.8% (w/v) agar, formed friable organogenic calli (7-8 mm size) after 8 wk under incubation in normal light period supplemented with 200 μmol m⁻² S⁻¹ of day light fluorescent illumination. The calli were transferred to MS medium supplemented with thidiazuron (TDZ) (1–7 μM) and naphthalene acetic acid (NAA) (0.2–0.4 μM) for regeneration. The calli developed shoot buds after 3–4 wk, and the frequencies of calli-forming shoots varied from 5% to 44%. Optimum shoot regeneration occurred on MS medium supplemented with 5 μM TDZ and 0.4 μM NAA. On this medium, 44% cultures responded with an average number of 12 shoots per callus. Whole plants were recovered following rooting of shoots in 1/2 MS medium supplemented with 3 μM indole 3-butyric acid.     

Effective expression of soluble aglycosylated recombinant human Fcγ receptor I by low translational efficiency in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Human FcγRI (CD64) is an integral membrane glycoprotein functioning as a high-affinity receptor binding to monomeric IgG. In this study, the extracellular region of FcγRI, which is the actual part that interacts with IgG, was expressed as aglycosylated recombinant human FcγRI (rhFcγRI) in Escherichia coli. The soluble form of aglycosylated rhFcγRI was expressed in the periplasm of E. coli. The production of soluble aglycosylated rhFcγRI was increased by low induction levels. Furthermore, this production was increased by low translational efficiency, controlled by modification of the putative region between the ribosome binding site and initiation codon of rhFcγRI fusing signal peptide (MalE, PelB, or TorT) of the expression vector. By the optimization of induction and translational efficiency, the production of soluble aglycosylated rhFcγRI was up to approximately 0.8 mg/l of culture medium. Surface plasmon resonance analysis revealed that the binding affinities of aglycosylated rhFcγRI for human IgG1 (equilibrium dissociation constant K _D = [1.7 ± 0.2] × 10⁻¹⁰ M) and IgG3 (K _D = [1.1 ± 0.2] × 10⁻¹⁰ M) were similar to those of glycosylated rhFcγRI.     

Energetics of swimming at maximal speeds in humans

The energy cost per unit of distance (C _s, kilojoules per metre) of the front-crawl, back, breast and butterfly strokes was assessed in 20 elite swimmers. At sub-maximal speeds (v), C _s was measured dividing steady-state oxygen consumption (V˙O₂) by the speed (v, metres per second). At supra-maximal v, C _s was calculated by dividing the total metabolic energy (E, kilojoules) spent in covering 45.7, 91.4 and 182.9 m by the distance. E was obtained as: E = E _an+V˙O_2max t _p−V˙O_2max(1−e^{−( t p/)}), where E _an was the amount of energy (kilojoules) derived from anaerobic sources, V˙O_2max litres per second was the maximal oxygen uptake, α (=20.9 kJ · l O₂ ⁻¹) was the energy equivalent of O₂, τ (24 s) was the time constant assumed for the attainment of V˙O_2max at muscle level at the onset of exercise, and t _p (seconds) was the performance time. The lactic acid component was assumed to increase exponentially with t _p to an asymptotic value of 0.418 kJ · kg⁻¹ of body mass for t _p ≥ 120 s. The lactic acid component of E _an was obtained from the net increase of lactate concentration after exercise (Δ[La]_b) assuming that, when Δ[La]_b = 1 mmol · l⁻¹ the net amount of metabolic energy released by lactate formation was 0.069 kJ · kg⁻¹. Over the entire range of v, front crawl was the least costly stroke. For example at 1 m · s⁻¹, C _s amounted, on average, to 0.70, 0.84, 0.82 and 0.124 kJ · m⁻¹ in front crawl, backstroke, butterfly and breaststroke, respectively; at 1.5 m · s⁻¹, C _s was 1.23, 1.47, 1.55 and 1.87 kJ · m⁻¹ in the four strokes, respectively. The C _s was a continuous function of the speed in all of the four strokes. It increased exponentially in crawl and backstroke, whereas in butterfly C _s attained a minimum at the two lowest v to increase exponentially at higher v. The C _s in breaststroke was a linear function of the v, probably because of the considerable amount of energy spent in this stroke for accelerating the body during the pushing phase so as to compensate for the loss of v occurring in the non-propulsive phase. Accepted: 14 April 1998     

Quercetin in Lyotropic Liquid Crystalline Formulations: Physical, Chemical and Functional Stability

The purpose of this study was to develop a lyotropic liquid crystalline formulation using the emulsifier vitamin E TPGS and evaluate its behavior after incorporation of a flavonoid, quercetin. The physical (macro and microscopic), chemical (determination of quercetin content by the HPLC method) and functional (determination of quercetin antioxidant activity by DPPH^• assay) stability of the lamellar liquid crystalline formulation containing flavonoid was evaluated when stored at 4 ± 2 °C; 30 ± 2 °C/70 ± 5% RH (relative humidity) and 40 ± 2 °C/70 ± 5% RH during 12 months. The lamellar liquid crystalline structure of the formulation was maintained during the experiment, however chemical and functional stability results showed a great influence of the storage period in all conditions tested. A significant decrease in quercetin content (approximately 40%) was detected during the first month of storage and a similar significant loss in antioxidant activity was detected after 6 months. The remaining flavonoid content was unchanged during the final 6 months of the experimental period. The results suggest possible interactions between quercetin and the liquid crystalline formulation, which could inhibit or reduce the quercetin activity incorporated in the system. In conclusion, the present study demonstrated that incorporation of quercetin (1%) did not affect the liquid crystalline structure composed of vitamin E TPGS/IPM/PG–H₂O (1:1) at 63.75/21.25/15 (w/w/w). Nevertheless, of the total quercetin incorporated in the system only 60% was free to act as an antioxidant.     

Somatic embryogenesis and plantlet production using rejuvenated tissues from serial grafting of a mature <Emphasis Type="Italic">Kalopanax septemlobus</Emphasis> tree

An effective micropropagation technique via somatic embryogenesis has been developed using tissue from serially grafted shoots generated from a mature Kalopanax septemlobus tree (~40 y old). Callus was induced from leaf segments obtained from the grafts by culturing the explants in Murashige and Skoog (MS) medium supplemented with 2,4-D and 3% w/v sucrose under darkness. The effects of sucrose, coconut water, and polyethylene glycol (PEG-3350) were evaluated as factors to promote development of somatic embryos (SEs) from embryogenic callus. More than 90% of explants formed callus; however, only 2.5%, or 20 leaf segments out of 800 explants, formed embryogenic callus after 8 wk of culture. High sucrose concentrations (3% and 5% w/v) were effective in inducing SEs. Treatment with 2–10% v/v coconut water also had a positive effect on embryo induction. A synergistic effect on SE induction was obtained using sucrose and PEG, with presence of the latter compound resulting in smaller, more uniform SEs. Embryo germination and conversion to plantlets were significantly influenced by the gelling agents. In general, gelrite-gelled medium was superior to agar-gelled medium. In gelrite-gelled medium, gibberillic acid (GA₃) enhanced embryo germination. Converted plantlets in an artificial soil mixture showed a 91% survival rate and displayed no distinct morphological variations. Our results indicate that reliable somatic embryogenesis and plant production can be achieved with rejuvenated tissues after repeated grafting of shoots derived from a mature Kalopanax septemlobus tree.     

Influence of the Selected Antioxidants on the Stability of the Celsior Solution Used for Perfusion and Organ Preservation Purposes

The purpose of the following research was to improve the original Celsior solution in order to obtain a higher degree of stability and effectiveness. The solution was modified by the addition of selected antioxidants such as vitamin C, cysteine, and fumaric acid in the following concentrations: 0.1, 0.3, and 0.5 mmol/l. The solution’s stability was estimated using an accelerated stability test based on changes in histidine concentrations in the solution using Pauly’s method for determining concentrations. Elevated temperatures, the factor accelerating substances’ decomposition reaction rate, were used in the tests. The research was conducted at four temperatures at intervals of 10°C: 60 ± 0.2°C, 70 ± 0.2°C, 80 ± 0.2°C, and 90 ± 0.2°C. It was stated that the studied substances’ decomposition occurred in accordance with the equation for first-order reactions. The function of the logarithmic concentration (log%C) over time was revealed to be rectilinear. This dependence was used to determine the kinetics of decomposition reaction rate parameters (the rate constant of decomposition k, activation energy E _a, and frequency factor A). On the basis of these parameters, the stability of the modified solution was estimated at +5°C. The results obtained show that the proposed antioxidants have a significant effect on lengthening the Celsior solution’s stability. The best results were reached when combining two antioxidants: vitamin C and cysteine in 0.5 mmol/l concentrations. As a result, the Celsior solution’s stability was lengthened from 22 to 299 days, which is 13.5 times. Vitamin C at a concentration of 0.5 mmol/l increased the solution’s stability by 5.2 times (t ₉₀ = 115 days), cysteine at a concentration of 0.5 mmol/l caused a 4.4 times stability increase (t ₉₀ = 96 days), and fumaric acid at a concentration of 0.5 mmol/l extended the stability by 2.1 times (t ₉₀ = 48 days) in relation to the original solution.     

Extraction and characterisation of alginate from brown seaweeds (Fucales,Phaeophyceae) collected from Port Dickson,Peninsular Malaysia

Four species of brown seaweeds, namely Sargassum baccularia, Sargassum binderi, Sargassum siliquosum and Turbinaria conoides, harvested from Port Dickson, Negeri Sembilan, Malaysia were analysed for ash content, alginate yield and alginate properties. Seaweeds calcined at 450°C were found to have low amount of non-combustible residue as these were not contaminated by calcareous animals. Alginate was extracted from these seaweeds by two methods: hot and cold. In the hot method, the storing time was 3 h and the processing temperature was 50°C, whilst in the cold method, the sample was stored overnight at room temperature. Higher yield of alginate was obtained by the hot method compared to the cold method, but alginate extracted by the cold method gave higher molecular weight. In the hot method, 49.9% of alginate was extracted from S. siliquosum, followed by T. conoides (41.4%), S. binderi (38.9%) and S. baccularia (26.7%). Alginate extracted from T. conoides has an average molecular weight, M _w, of 8.06 × 10⁵ g mol⁻¹, whereas alginate from S. siliquosum was the lowest in M _w (4.81 × 10⁵ g mol⁻¹) when the extraction was done at room temperature. Alginate extracted from S. baccularia was found to be very heat-sensitive. Its M _w has dropped more than 83%, from 7.52 × 10⁵ to 1.23 × 10⁵ g mol⁻¹, when the extraction temperature was raised. The effect of heat on the extent of depolymerisation of the alginate molecule of the other three brown seaweed species was less significant, with decrease in molecular weight ranging between 13% and 16%.     

Characterisation of a detergent-stable alkaline protease from a novel thermophilic strain Paenibacillus tezpurensis sp. nov. AS-S24-II

An alkaline-protease-producing bacterial strain (AS-S24-II) isolated from a soil sample in Assam is a Gram-stain-positive, catalase-positive, endospore-forming rod and grows at temperatures ranging from 30 °C to 60 °C and salinity ranging from 0% to 7% (w/v) NaCl. Phenotypic characterisation, chemotaxonomic properties, presence of Paenibacillus-specific signature sequences, and ribotyping data suggested that the strain AS-S24-II represents a novel species of the genus Paenibacillus, for which the name Paenibacillus tezpurensis sp. nov. (MTCC 8959) is proposed. Phylogenetic analysis revealed that P. lentimorbus strain DNG-14 and P. lentimorbus strain DNG-16 represent the closest phylogenetic neighbour of this novel strain. Alkaline protease production (598 × 10³ U l⁻¹) by P. tezpurensis sp. nov. in SmF was optimised by response surface method. A laundry-detergent-stable, Ca²⁺-independent, 43-kDa molecular weight alkaline serine protease from this strain was purified with a 1.7-fold increase in specific activity. The purified protease displayed optimum activity at pH 9.5 and 45–50 °C temperature range and exhibited a significant stability and compatibility with surfactants and most of the tested commercial laundry detergents at room temperature. Further, the protease improved the wash performance of detergents, thus demonstrating its feasibility for inclusion in laundry detergent formulations.     

Evaluation of Candida acidothermophilum in ethanol production from lignocellulosic biomass

A Saccharomyces-cerevisiae-based simultaneous saccharification and fermentation (SSF) of lignocellulosic biomass is limited to an operating temperature of about 37 °C, and even a small increase in temperature can have a deleterious effect. This points to a need for a more thermotolerant yeast. To this end, S. cerevisiae D₅A and a thermotolerant yeast, Candida acidothermophilum, were tested at 37 °C, 40 °C, and 42 °C using dilute-acid-pretreated poplar as substrate. At 40 °C, C. acidothermophilum produced 80% of the theoretical ethanol yield, which was higher than the yield from S.cerevisiae D₅A at either 37 °C or 40 °C. At 42 °C, C. acidothermophilum showed a slight drop in performance. On the basis of preliminary estimates, SSF with C. acidothermophilum at 40 °C can reduce cellulase costs by about 16%. Proportionately greater savings can be realized at higher temperatures if such a high-temperature SSF is feasible. This demonstrates the advantage of using thermophilic or thermotolerant yeasts. Received: 20 February 1997 / Received revision: 24 June 1997 / Accepted: 4 July 1997     

Assessing the heat tolerance of 17 beef cattle genotypes

Cattle production plays a significant role in terms of world food production. Nearly 82% of the world’s 1.2 billion cattle can be found in developing countries. An increasing demand for meat in developing countries has seen an increase in intensification of animal industries, and a move to cross-bred animals. Heat tolerance is considered to be one of the most important adaptive aspects for cattle, and the lack of thermally-tolerant breeds is a major constraint on cattle production in many countries. There is a need to not only identify heat tolerant breeds, but also heat tolerant animals within a non-tolerant breed. Identification of heat tolerant animals is not easy under field conditions. In this study, panting score (0 to 4.5 scale where 0 = no stress and 4.5 = extreme stress) and the heat load index (HLI) [HLI_BG<25°C = 10.66 + 0.28 × rh + 1.30 × BG – WS; and, HLI _{BG> 25°C} = 8.62 + 0.38 × rh + 1.55 × BG – 0.5 × WS + e^{(2.4 – WS)}, where BG = black globe temperature (^oC), rh = relative humidity (decimal form), WS = wind speed (m/s) and e is the base of the natural logarithm] were used to assess the heat tolerance of 17 genotypes (12,757 steers) within 13 Australian feedlots over three summers. The cattle were assessed under natural climatic conditions in which HLI ranged from thermonuetral (HLI < 70) to extreme (HLI > 96; black globe temperature = 40.2°C, relative humidity = 64%, wind speed = 1.58 m/s). When HLI > 96 a greater number (P < 0.001) of pure bred Bos taurus and crosses of Bos taurus cattle had a panting score ≥ 2 compared to Brahman cattle, and Brahman-cross cattle. The heat tolerance of the assessed breeds was verified using panting scores and the HLI. Heat tolerance of cattle can be assessed under field conditions by using panting score and HLI.     

Preparation and <Emphasis Type="Italic">In Vitro</Emphasis>/<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Microparticle Formulations Containing Meloxicam

In this study, we have formulated chitosan-coated sodium alginate microparticles containing meloxicam (MLX) and aimed to investigate the correlation between in vitro release and in vivo absorbed percentages of meloxicam. The microparticle formulations were prepared by orifice ionic gelation method with two different sodium alginate concentrations, as 1% and 2% (w/v), in order to provide different release rates. Additionally, an oral solution containing 15 mg of meloxicam was administered as the reference solution for evaluation of in vitro/in vivo correlation (ivivc). Following in vitro characterization, plasma levels of MLX and pharmacokinetic parameters [elimination half-life (t _1/2), maximum plasma concentration (C _max), time for C _max (t _max)] after oral administration to New Zealand rabbits were determined. Area under plasma concentration–time curve (AUC_0–∞) was calculated by using trapezoidal method. A linear regression was investigated between released% (in vitro) and absorbed% (in vivo) with a model-independent deconvolution approach. As a result, increase in sodium alginate content lengthened in vitro release time and in vivo t _max value. In addition, for ivivc, linear regression equations with r ² values of 0.8563 and 0.9402 were obtained for microparticles containing 1% and 2% (w/v) sodium alginate, respectively. Lower prediction error for 2% sodium alginate formulations (7.419 ± 4.068) compared to 1% sodium alginate formulations (9.458 ± 5.106) indicated a more precise ivivc for 2% sodium alginate formulation.     

Comparison of metabolite levels in callus of <Emphasis Type="Italic">Tecoma stans</Emphasis> (L.) Juss. ex Kunth. cultured in photoperiod and darkness

Tecoma stans is a tropical plant from the Americas. Antioxidant activity and both phenolic compound and flavonoid total content were determined for callus tissue of T. stans cultured in either a set photoperiod or in darkness. Callus lines from three explant types (hypocotyls, stem, and leaf) were established on B5 culture medium supplemented with 0.5 μM 2,4-D and 5.0 μM kinetin. While leaf-derived callus grew slower under a 16-h photoperiod (specific growth rate, μ = 0.179 d⁻¹, t _D = 3.9 d) than in darkness (μ = 0.236 d⁻¹, t _D = 2.9 d), it accumulated the highest amount (p < 0.05) of both phenolics (86.6 ± 0.01 mg gallic acid equivalents/g) and flavonoids (339.6 ± 0.06 mg catechin equivalents/g). Similarly, antioxidant activity was significantly higher (p < 0.05) when callus was cultured in period light than when grown in extended darkness. Antioxidant activity measured with a 2,20-azinobis (3-ethylbenzothiazoline-6-sulphonic acid) diammonium salt (ABTS)-based assay was 350.5 ± 15.8 mmol Trolox/g extract for callus cultured under a defined photoperiod compared to 129.1 ± 7.5 mmol Trolox/g extract from callus cultured in darkness. Content of phenolic compounds and flavonoids was in agreement with a better antioxidant power (EC₅₀ = 450 μg extract/mg 1,1-diphenyl-2-picrylhydrazyl) and antiradical efficiency. Results of the present study show that calli of T. stans are a source of compounds with antioxidant activity that is favored by culture under a set photoperiod.     

Development of a measles vaccine production process in MRC-5 cells grown on Cytodex1 microcarriers and in a stirred bioreactor

Measles vaccination remains the most efficient way to control the spread of the virus. This work focuses on the production of a measles vaccine using stirred conditions as an advanced option for process scale up. Non-porous Cytodex 1 microcarriers were used to support MRC-5 cell growth in suspension cultures. Virus replication was first optimized in spinner flasks, and the effects of various operational parameters were investigated. Cell infection with AIK-C measles strain at an MOI (multiplicity of infection) of 0.005, without glucose regulation and in M199 medium, resulted in a virus titer of 10^6.25 TCID₅₀ (median tissue culture infective dose)/ml. To optimize the production process in a 7-l bioreactor, we carried out various perfused cultures using minimum essential medium (MEM) + 5% FCS diluted with phosphate-buffered saline (PBS). We achieved a high cell density level (4.1 × 10⁶ cells/ml) with an efficient use of the medium when MEM + 5% FCS diluted with PBS at 25% was used during the cell amplification step. Optimization of measles production in MRC-5 cells grown on Cytodex 1 beads in a 7-l bioreactor showed that perfusion was the most efficient when compared to repeated-batch culture. Perfusion at a rate of 0.25 V (reactor volume)/day showed the highest specific productivity (1.6 IVP [infectious virus particle] cell⁻¹ day⁻¹). Testing of several stabilizers containing pharmaceutically improved components such as sugars, amino acids, and charged ions showed that the formulation composed of sucrose and MgCl₂, led to the maintenance of the infectivity of the AIK-C measles virus strain to a significant level, when stored at +28 °C, +4 °C and −60 °C.