Sortase-catalyzed assembly of distinct heteromeric fimbriae in Actinomyces naeslundii

Two types of adhesive fimbriae are expressed by Actinomyces; however, the architecture and the mechanism of assembly of these structures remain poorly understood. In this study we characterized two fimbrial gene clusters present in the genome of Actinomyces naeslundii strain MG-1. By using immunoelectron microscopy and biochemical analysis, we showed that the fimQ-fimP-srtC1-fimR gene cluster encodes a fimbrial structure (designated type 1) that contains a major subunit, FimP, forming the shaft and a minor subunit, FimQ, located primarily at the tip. Similarly, the fimB-fimA-srtC2 gene cluster encodes a distinct fimbrial structure (designated type 2) composed of a shaft protein, FimA, and a tip protein, FimB. By using allelic exchange, we constructed an in-frame deletion mutant that lacks the SrtC2 sortase. This mutant produces abundant type 1 fimbriae and expresses the monomeric FimA and FimB proteins, but it does not assemble type 2 fimbriae. Thus, SrtC2 is a fimbria-specific sortase that is essential for assembly of the type 2 fimbriae. Together, our experiments pave the way for several lines of molecular investigation that are necessary to elucidate the fimbrial assembly pathways in Actinomyces and their function in the pathogenesis of different biofilm-related oral diseases.     

Multi-omic profiling reveals associations between the gut mucosal microbiome,the metabolome,and host DNA methylation associated gene expression in patients with colorectal cancer

Actinomyces oris is an early colonizer and has two types of fimbriae on its cell surface, type 1 fimbriae (FimP and FimQ) and type 2 fimbriae (FimA and FimB), which contribute to the attachment and coaggregation with other bacteria and the formation of biofilm on the tooth surface, respectively. Short-chain fatty acids (SCFAs) are metabolic products of oral bacteria including A. oris and regulate pH in dental plaques. To clarify the relationship between SCFAs and fimbrillins, effects of SCFAs on the initial attachment and colonization (INAC) assay using A. oris wild type and fimbriae mutants was investigated. INAC assays using A. oris MG1 strain cells were performed with SCFAs (acetic, butyric, propionic, valeric and lactic acids) or a mixture of them on human saliva-coated 6-well plates incubated in TSB with 0.25% sucrose for 1 h. The INAC was assessed by staining live and dead cells that were visualized with a confocal microscope. Among the SCFAs, acetic, butyric and propionic acids and a mixture of acetic, butyric and propionic acids induced the type 1 and type 2 fimbriae-dependent and independent INAC by live A. oris, but these cells did not interact with streptococci. The main effects might be dependent on the levels of the non-ionized acid forms of the SCFAs in acidic stress conditions. GroEL was also found to be a contributor to the FimA-independent INAC by live A. oris cells stimulated with non-ionized acid. SCFAs affect the INAC-associated activities of the A. oris fimbrillins and non-fimbrillins during ionized and non-ionized acid formations in the form of co-culturing with other bacteria in the dental plaque but not impact the interaction of A. oris with streptococci.     

The genetic determinant of adhesive function in type 1 fimbriae of Escherichia coli is distinct from the gene encoding the fimbrial subunit.

The role of type 1 fimbriae in the mannose-sensitive attachment of Escherichia coli to eucaryotic cells was investigated by deletion mutation analysis of a recombinant plasmid, pSH2, carrying the genetic information for the synthesis and expression of functional type 1 fimbriae. A mutant, pUT2002, containing a deletion remote from the structural gene encoding the 17-kilodalton subunit protein of type 1 fimbriae failed to agglutinate guinea pig erythrocytes even though the bacteria expressed fimbriae morphologically and antigenically indistinguishable from those produced by the intact recombinant plasmid. Fimbriae isolated from pUT2002 failed to agglutinate guinea pig erythrocytes, but reacted with a monoclonal antibody specific for quaternary structural determinants of type 1 fimbriae. Moreover, the dissociated fimbrial subunits from this mutant were indistinguishable from normal fimbriae by their migration during electrophoresis in sodium dodecyl sulfate-polyacrylamide gels, by their reactivity with a monoclonal antibody directed against a subunit-specific epitope, and in enzyme-linked immunosorbent assays with monospecific antisera. These results indicate that the adhesive functions in type 1 fimbriae are dependent on a factor(s) encoded by a gene other than those required for synthesis, assembly, and expression of the structural 17-kilodalton subunit.     

Identification of two ancillary subunits of Escherichia coli type 1 fimbriae by using antibodies against synthetic oligopeptides of fim gene products.

We have chemically synthesized oligopeptides corresponding to the NH2-terminal stretch of two gene products, designated FimG and FimH, of the fim gene cluster of Escherichia coli. These synthetic peptides, designated S-T1FimG(1-16) and S-T1FimH(1-25)C, evoked antibodies in rabbits that reacted with 14- and 29-kilodalton subunits, respectively, of dissociated fimbriae encoded by the recombinant plasmid pSH2 carrying the genetic information for the synthesis and expression of functional type 1 fimbriae. Neither of these fimbrial proteins was detected in dissociated fimbrial preparations from nonadhesive E. coli cells carrying the mutant plasmid pUT2002, containing a restriction site-specific deletion of fimG and fimH. Anti-S-T1FimH(1-25)C inhibited the adherence of type 1 fimbriated E. coli to epithelial cells. Immunoelectron microscopy revealed that anti-S-T1FimH(1-25)C, but not anti-S-T1FimG(1-16), bound to intact type 1 fimbriae of E. coli at the fimbrial tips and at long intervals along the fimbrial filaments. Anti-S-T1FimG(1-16) appeared to be directed at epitopes not accessible on the intact fimbriae and consequently failed to bind to intact fimbriae or to block fimbrial attachment. Our results suggest that the fimG and fimH gene products are components of type 1 fimbriae and that FimH may be the tip adhesin mediating the binding of type 1 fimbriated E. coli to D-mannose residues on mucosal surfaces.     

Purification and Characterization of Type 1 Fimbriae of Salmonella typhi

Type 1 fimbriae have been purified from a Salmonella typhi strain of clinical origin. Purified fimbriae retained their ability to bind to erythrocytes in a mannose-inhibitable fashion and, in doing so, behaved preferentially as a monovalent adhesin. SDS-PAGE analysis of the fimbrial preparation showed the presence of a 20-kDa major polypeptide component (fimbrillin) and of additional larger polypeptides present in smaller amounts. The amino-terminal sequence of fimbrillin was determined and turned out to be very similar but not identical to that of type 1 fimbrillins of other Salmonella serovars. A Western blot analysis of the purified fimbrial preparation using an antiserum raised against native fimbriae suggested that fimbrial proteins did not carry any major sequential epitope and that, in native fimbriae, conformational epitopes, possibly generated between different subunits, might provide for the major immunogenic epitopes. Analysis of different S. typhi clinical isolates using the anti-fimbrial antiserum showed an overall immunological similarity of these structures within this serovar.     

Characterization of type 1 and mannose-resistant fimbriae of Erwinia spp.

Type 1 fimbriae from Erwinia carotovora subsp. carotovora and mannose-resistant fimbriae from Erwinia rhapontici were purified and characterized. The type 1 fimbrillin had an apparent molecular weight of 16,500; that of the mannose-resistant fimbrillin was 18,000. The amino-terminal amino acid sequences of the two fimbrillins were related, but tryptic peptide maps showed significant differences between the proteins. No serological cross-reaction was found between the two fimbrial filaments, nor did they cross-react with type 1 or type 3 fimbriae purified from other enterobacterial species. Immunofluorescent staining of bacterial populations revealed that they were heterogeneous with respect to fimbriation.     

Heterogeneous post-translational modification of Actinobacillus actinomycetemcomitans fimbrillin

Fresh isolates of Actinobacillus actinomycetemcomitans produce bundle-forming fimbriae. The exact molecular mass of A. actinomycetemcomitans fimbrillin, a structural subunit of fimbriae, was determined by liquid chromatography-electrospray ionization mass spectrometry. Three major molecular species with 6,226.0, 6,366.0, and 6,513.0 Da were detected in a purified fimbrial fraction from the strain 310-a. These molecular masses were significantly higher than the molecular weight (5,118 Da) calculated from nucleotide sequence data of the fimbrillin gene, flp, suggesting that the fimbrial peptides were post-translationally modified. Modification of the fimbrial peptides was also suggested by an N-terminal amino acid sequence analysis of fimbrillin peptic fragments, with the modified amino acids being due to seven serine or asparagine residues located in the C-terminal region. A periodate oxidation/biotin-hydrazide labeling assay of fimbrillin suggested that it might be glycosylated.     

Fragmentation of Escherichia coli type 1 fimbriae exposes cryptic D-mannose-binding sites.

Cells of the gram-negative bacterium Escherichia coli are able to attach to various host cells by means of a mannose-specific adhesin associated with type 1 fimbriae. Here we show that fragmentation of type 1 fimbriae by freezing and thawing results in increased mannose-binding activity as demonstrated by increased hemagglutination, increased stimulation of human lymphocyte proliferation, and increased binding of the mannose-containing enzyme horseradish peroxidase. Increased activity in all three assays was mannose sensitive and was not exhibited by FimH- mutant type 1 fimbriae lacking the adhesin. Scatchard analysis of the data from peroxidase binding assays showed that unfrozen and frozen fimbriae contain binding sites displaying two classes of affinity. Frozen and thawed fimbriae expressed an increase in the number of high-affinity binding sites. These results show that fragmentation of the fimbrial structure exposes cryptic mannose-binding activity associated with type 1 fimbriae, presumably that of internally located adhesin molecules. Our data support earlier observations that adhesin moieties of type 1 fimbriae are located both at the tips and at intervals along the length of the fimbriae. In addition, our data suggest that only the adhesin moieties that are located at the fimbrial tips are functional in binding mannose. Adhesins located along the length of the fimbriae have their mannose-binding activity buried within the fimbrial structure and hence are not functional. We propose an updated model for the structure of type 1 fimbriae that is in agreement with the above observations.     

complex interplay between type 1 fimbrial expression and flagellum-mediated motility of uropathogenic Escherichia coli

Type 1 fimbriae and flagella have been previously shown to contribute to the virulence of uropathogenic Escherichia coli (UPEC) within the urinary tract. In this study, the relationship between motility and type 1 fimbrial expression was tested for UPEC strain CFT073 by examining the phenotypic effect of fimbrial expression on motility and the effect that induction of motility has on type 1 fimbrial expression. While constitutive expression of type 1 fimbriae resulted in a significant decrease in motility and flagellin expression (P < 0.0001), a loss of type 1 fimbrial expression did not result in increased motility. Additionally, hypermotility and flagellar gene over- and underexpression were not observed to affect the expression of type 1 fimbriae. Hence, it appeared that the relationship between type 1 fimbrial expression and motility is unidirectional, where the overexpression of type 1 fimbriae dramatically affects motility and flagellum expression but not vice versa. Moreover, the constitutive expression of type 1 fimbriae in UPEC cystitis isolate F11 and the laboratory strain E. coli K-12 MG1655 also resulted in decreased motility, suggesting that this phenomenon is not specific to CFT073 or UPEC in general. Lastly, by analyzing the repression of motility caused by constitutive type 1 fimbrial expression, it was concluded that the synthesis and presence of type 1 fimbriae at the bacterial surface is only partially responsible for the repression of motility, as evidenced by the partial restoration of motility in the CFT073 fim L-ON DeltafimAICDFGH mutant. Altogether, these data provide further insight into the complex interplay between type 1 fimbrial expression and flagellum-mediated motility.     

Molecular basis for the enterocyte tropism exhibited by Salmonella typhimurium type 1 fimbriae

Salmonella typhimurium exhibits a distinct tropism for mouse enterocytes that is linked to their expression of type 1 fimbriae. The distinct binding traits of Salmonella type 1 fimbriae is also reflected in their binding to selected mannosylated proteins and in their ability to promote secondary bacterial aggregation on enterocyte surfaces. The determinant of binding in Salmonella type 1 fimbriae is a 35-kDa structurally distinct fimbrial subunit, FimHS, because inactivation of fimHS abolished binding activity in the resulting mutant without any apparent effect on fimbrial expression. Surprisingly, when expressed in the absence of other fimbrial components and as a translational fusion protein with MalE, FimHS failed to demonstrate any specific binding tropism and bound equally to all cells and mannosylated proteins tested. To determine if the binding specificity of Salmonella type 1 fimbriae was determined by the fimbrial shaft that is intimately associated with FimHS, we replaced the amino-terminal half of FimHS with the corresponding sequence from Escherichia coli FimH (FimHE) that contains the receptor binding domain of FimHE. The resulting hybrid fimbriae bearing FimHES on a Salmonella fimbrial shaft exhibited binding traits that resembled that of Salmonella rather than E. coli fimbriae. Apparently, the quaternary constraints imposed by the fimbrial shaft on the adhesin determine the distinct binding traits of S. typhimurium type 1 fimbriae.     

Type 1 fimbriae of insecticidal bacterium Xenorhabdus nematophila is necessary for growth and colonization of its symbiotic host nematode Steinernema carpocapsiae

Xenorhabdus nematophila produces type 1 fimbriae on the surface of Phase I cells. Fimbriae mediate recognition and adhesion of the bacteria to its target cell. To investigate the role of fimbriae in the biology of X. nematophila , we have produced a fimbrial mutant strain by insertional inactivation of the mrx A gene, encoding the structural subunit of type 1 fimbriae. Phenotypic characterization of the mutant revealed loss of fimbriae on the cell surface. Cell surface characteristics like dye absorption, biofilm formation, red blood cell agglutination remained unaltered. The mrx A mutant was defective in swarming on soft agar, although swimming motility was not affected. Flagellar expression was suppressed in the mrxA strain under swarming conditions, but not swimming conditions. Agglutination and cytotoxicity of the mutant to larval haemocytes was also reduced. When the mutant cells were injected in the haemocoel of the fourth instar larvae of Helicoverpa armigera , an increase in the LT₅₀ of 9–12 h was observed relative to the wild-type strain. The nematode growth was slow on the lawn of the fimbrial mutant. The mrxA negative strain was unable to colonize the nematode gut efficiently. This study demonstrates importance of type 1 fimbriae in establishment of bacteria-nematode symbiosis, a key to successful pest management program.     

Investigating the role of secA2 in secretion and glycosylation of a fimbrial adhesin in Streptococcus parasanguis FW213

Adhesion of Streptococcus parasanguis FW213, a primary colonizer, to the tooth surface is mediated mainly by peritrichous long fimbriae. The fimbrial structural unit, Fap1, is indispensable for fimbriae biogenesis, adhesion to an in vitro tooth model and biofilm formation. Mature Fap1 is a glycoprotein with an apparent molecular mass of 200 kDa. Glycosylated Fap1 is not present in some mutants screened from a transposon mutant library. Localization of the transposition sites revealed a gene determined to be secA2, which is distinct from the canonical secA gene. In FW213, glycosylated Fap1 was present in all the subcellular fractions including the cytoplasm. In VT1574, a non-polar mutant of secA2 generated by in frame deletion, Fap1 was not secreted. Glycosylated Fap1 was present in the membrane and cytoplasm of the mutant, although in greatly reduced amounts. Fap1 secretion and abundance were restored when VT1574 was complemented by a plasmid-borne secA2. The secretion defect of the secA2 mutation appears to be limited to a small group of proteins such as Fap1 and FimA. These data suggested that Fap1 secretion rather than glycosylation was the major effect of the deletion of secA2; however, this deletion also had an impact on Fap1 abundance. Two more secA2 mutants with different regions deleted were tested for their ability to secrete Fap1. One mutant was completely unable to secrete Fap1 while the other was able to secrete, but in a decreased amount. These data suggest that the region deleted in the latter mutant (nucleotides 2032-2337) is dispensable for Fap1 secretion.     

Type I fimbriae mediate in vitro adherence of porcine F18ac+ enterotoxigenic <Emphasis Type="Italic">Escherichia coli</Emphasis> (ETEC)

Type I fimbriae commonly expressed by Escherichia coli mediate initial attachment of bacteria to host epithelial cells. However, the role of type I fimbriae in the adherence of porcine enterotoxigenic E. coli (ETEC) to host receptors is unclear. In this study, we examined the role of type I fimbriae in the adherence and biofilm formation of F18ac+ ETEC by constructing mutant strains with deletion of type I fimbrial major subunit (fimA) or minor subunit (fimH). The data indicated that the isogenic ΔfimA and ΔfimH mutants showed significantly lower adherence to porcine epithelial IPEC-1 and IPEC-J2 cells as compared to the F18ac+ ETEC parent strain. In addition, the adherence of F18ac+ ETEC to both cell lines was blocked by the presence of 0.5% D-mannose in the cell culture medium. In addition, both mutant strains impaired their ability to form biofilm in vitro. Interestingly, the deletion of fimA or fimH genes resulted in remarkable up-regulation of the expression of adhesin involved in diffuse adherence (AIDA-I). These results indicated that type I fimbriae may be required for efficient adherence of F18ac+ ETEC to pig epithelial cells and, perhaps, biofilm formation.     

Fimbrial adhesins: similarities and variations in structure and biogenesis

Abstract Fimbriae are wiry (2 to 4 nm diam.) or rod-shaped (6 to 8 nm diam.), fibre-like structures on the surfaces of bacteria which mediate attachment to host cells. Much has been learned in recent years about the biogenesis, structure and regulation of expression of these adhesive organelles in Gram-negative bacteria. Analyses of the genetic determinants encoding the biogenesis of fimbriae has revealed that the adhesive interaction of fimbriae can be mediated by major subunits (CFA/I and CS1 fimbriae) or minor subunits (P, S, and type 1 fimbriae), with the adhesin being located either at the tip of the fimbria or along the length of the fimbrial shaft. Minor subunits can also act as adapters, anchors, initiators or elongators. Post-translational glycosylation of the type 4 pilins of Neisseria gonorrhoeae, Neisseria meningitidis and Pseudomonas aeruginosa has been demonstrated. The structures of the PapD chaperone of Escherichia coli and of N. gonorrhoeae type 4 fimbrin have been resolved at 2.0–2.6 Å. Rod-shaped fimbriae should not be thought of as being rigid inflexible structures but rather as dynamic structures which can undergo transition from a helicoidal to a fibrillar conformation to provide a degree of elasticity and plasticity to the fimbriae so that they can resist shear forces, rather like a bungee cord. At least four mechanisms have been identified in the assembly of fimbriae from fimbrin subunits, namely the chaperone-usher pathway (e.g., P-fimbriae of uropathogenic E. coli ), the general secretion assembly pathway (e.g., type 4 fimbriae or N -methylphenylalanine fimbriae of P. aeruginosa , the extracellular nucleation-precipitation pathway (e.g., curli of E. coli ) and the CFA/I, CS1 and CS2 fimbrial pathway.     

Identification of the genetic determinants of Salmonella enterica serotype Typhimurium that may regulate the expression of the type 1 fimbriae in response to solid agar and static broth culture conditions

Background

Type 1 fimbriae are the most commonly found fimbrial appendages on the outer membrane of Salmonella enterica serotype Typhimurium. Previous investigations indicate that static broth culture favours S. Typhimurium to produce type 1 fimbriae, while non-fimbriate bacteria are obtained by growth on solid agar media. The phenotypic expression of type 1 fimbriae in S. Typhimurium is the result of the interaction and cooperation of several genes in the fim gene cluster. Other gene products that may also participate in the regulation of type 1 fimbrial expression remain uncharacterized.

Results

In the present study, transposon insertion mutagenesis was performed on S. Typhimurium to generate a library to screen for those mutants that would exhibit different type 1 fimbrial phenotypes than the parental strain. Eight-two mutants were obtained from 7,239 clones screened using the yeast agglutination test. Forty-four mutants produced type 1 fimbriae on both solid agar and static broth media, while none of the other 38 mutants formed type 1 fimbriae in either culture condition. The flanking sequences of the transposons from 54 mutants were cloned and sequenced. These mutants can be classified according to the functions or putative functions of the open reading frames disrupted by the transposon. Our current results indicate that the genetic determinants such as those involved in the fimbrial biogenesis and regulation, global regulators, transporter proteins, prophage-derived proteins, and enzymes of different functions, to name a few, may play a role in the regulation of type 1 fimbrial expression in response to solid agar and static broth culture conditions. A complementation test revealed that transforming a recombinant plasmid possessing the coding sequence of a NAD(P)H-flavin reductase gene ubiB restored an ubiB mutant to exhibit the type 1 fimbrial phenotype as its parental strain.

Conclusion

Genetic determinants other than the fim genes may involve in the regulation of type 1 fimbrial expression in S. Typhimurium. How each gene product may influence type 1 fimbrial expression is an interesting research topic which warrants further investigation.     

Identification of a gene, pilF, required for type 4 fimbrial biogenesis and twitching motility in Pseudomonas aeruginosa

Many bacterial pathogens produce a class of surface structures called type 4 fimbriae. In Pseudomonas aeruginosa these fimbriae are responsible for adhesion and translocation across host epithelial surfaces. We have identified a novel gene involved in the complex process of type 4 fimbrial biogenesis. This gene, termed pilF, is located on SpeI fragment S at 30 min on the P. aeruginosa genomic map, which is the sixth region on the chromosome shown to contain a fimbrial-associated gene. The PilF protein has a predicted M_r of 22 402, and together with a highly homologous upstream ORF shares a chromosomal arrangement similar to that found in Haemophilus influenzae. A pilF mutant is blocked in the export/assembly of the fimbrial subunit PilA, and accumulates this protein in the membrane fraction. Complementation studies indicate that the cloned pilF gene is able to restore the expression of surface fimbriae, twitching motility and susceptibility to fimbrial-specific bacteriophage