Interactions between peptidoglycan and the ExeAB complex during assembly of the type II secretin of Aeromonas hydrophila

Aeromonas hydrophila transports extracellular protein toxins via the type II secretion system, an export mechanism comprised of numerous proteins that spans both the inner and outer membranes. Two components of this secretion system, ExeA and ExeB, form a complex in the inner membrane that functions to locate and/or assemble the ExeD secretin in the outer membrane. In the studies reported here, two-codon insertion mutagenesis of exeA revealed that an insertion at amino acid 495 in the C-terminal region of ExeA did not alter ExeAB complex formation yet completely abrogated its involvement in ExeD secretin assembly and thus rendered the bacteria secretion negative. In silico analysis of protein motifs with similar amino acid profiles revealed that this amino acid is located within a putative peptidoglycan (PG) binding motif in the periplasmic domain of ExeA. Substitution mutations of three highly conserved amino acids in the motif were constructed. In cells expressing each of these mutants, the ability to assemble the ExeD secretin or secrete aerolysin was lost, while ExeA retained the ability to form a complex with ExeB. In in vivo cross-linking experiments, wild-type ExeA could be cross-linked to PG, whereas the three substitution mutants of ExeA could not. These data indicate that PG binding and/or remodelling plays a role in the function of the ExeAB complex during assembly of the ExeD secretin.     

ExeA binds to peptidoglycan and forms a multimer for assembly of the type II secretion apparatus in Aeromonas hydrophila

Aeromonas hydrophila uses the type II secretion system (T2SS) to transport protein toxins across the outer membrane. The inner membrane complex ExeAB is required for assembly of the ExeD secretion channel multimer, called the secretin, into the outer membrane. A putative peptidoglycan‐binding domain (Pfam number PF01471) conserved in many peptidoglycan‐related proteins is present in the periplasmic region of ExeA (P‐ExeA). In this study, co‐sedimentation analysis revealed that P‐ExeA was able to bind to highly pure peptidoglycan. The protein assembled into large multimers in the presence of peptidoglycan fragments, as shown in native PAGE, gel filtration and cross‐linking experiments. The requirement of peptidoglycan for multimerization was abrogated when the protein was incubated at 30°C and above. These results provide evidence that the putative peptidoglycan‐binding domain of ExeA is involved in physical contact with peptidoglycan. The interactions facilitate the multimerization of ExeA, favouring a model in which the protein forms a multimeric structure on the peptidoglycan during the ExeAB‐dependent assembly of the secretin multimer in the outer membrane.     

Involvement of the twin-arginine translocation system in protein secretion via the type II pathway.

The general secretory pathway (GSP) is a two-step process for the secretion of proteins by Gram-negative bacteria. The translocation across the outer membrane is carried out by the type II system, which involves machinery called the secreton. This step is considered to be an extension of the general export pathway, i.e. the export of proteins across the inner membrane by the Sec machinery. Here, we demonstrate that two substrates for the Pseudomonas aeruginosa secreton, both phospholipases, use the twin-arginine translocation (Tat) system, instead of the Sec system, for the first step of translocation across the inner membrane. These results challenge the previous vision of the GSP and suggest for the first time a mosaic model in which both the Sec and the Tat systems feed substrates into the secreton. Moreover, since P.aeruginosa phospholipases are secreted virulence factors, the Tat system appears to be a novel determinant of bacterial virulence.     

An ExeAB complex in the type II secretion pathway of Aeromonas hydrophila: effect of ATP-binding cassette mutations on complex formation and function

The energy-dependent secretion of aerolysin by Aeromonas hydrophila requires the ExeA and ExeB proteins. An 85 kDa complex containing the two proteins was identified in wild-type cells but not in cells producing either protein alone. Radiolabelling followed by cross-linking, immunoprecipitation and then reduction of the cross-links confirmed the presence of the two proteins in the same complex. The complex could also be extracted intact from cell membranes with non-ionic detergents. A G229D substitution in the kinase-3a motif of ExeA strongly reduced the level of aerolysin secretion, as did the replacement of the invariant Lys of the kinase-1a motif (K56) with Arg. The G229D mutant contained very little of the ExeA–ExeB complex, but overexpression of the mutant complex until wild-type levels were achieved allowed normal secretion. In contrast, the K56R mutation had no effect on complex formation, but normal secretion levels occurred only when there was a far greater amount of the complex present. These results are consistent with a model in which binding of ATP by ExeA is required for ExeA–ExeB complex formation, while hydrolysis is required for its function in secretion once established.     

Structural interactions define assembly adapter function of a type II secretion system pseudopilin

1. Download : Download high-res image (174KB)
2. Download : Download full-size image

     

Protein-peptidoglycan interactions modulate the assembly of the needle complex in the Salmonella invasion-associated type III secretion system

The invasion-associated type III secretion system of Salmonella enterica assembles as a supra-molecular structure, termed needle complex, which spans the bacterial envelope. Here, we present evidence for protein-peptidoglycan interactions that modulate the assembly of this organelle. The presence of major membrane components of the needle complex (PrgH, PrgK and InvG) and InvH, required for efficient assembly of the organelle, was examined in peptidoglycan purified by extensive boiling of bacteria in 4% SDS. InvH, PrgH and PrgK, but not InvG, were detected in this purified material. InvH was present in the peptidoglycan in higher relative amounts than PrgH or PrgK, and was the only protein efficiently bound to peptidoglycan in cross-linking experiments. Analysis in mutants defective for needle complex proteins showed that the needle proteins PrgI and PrgJ and, to a lesser extent, InvH, sustain the association of PrgH and PrgK with peptidoglycan. In contrast, the association of InvH with peptidoglycan did not necessitate other needle complex proteins. Functional analysis showed that the association of InvH, PrgH and PrgK with peptidoglycan is abolished in live bacteria carrying structural modifications in the peptidoglycan. The loss of these interactions caused a marked reduction in the number of needle complexes and, concomitantly, in protein secretion and bacterial invasion of cultured eukaryotic cells. Altogether, these data provide the first evidence for an association between proteins of the Salmonella needle complex and the peptidoglycan. In addition, we demonstrate that these protein-peptidoglycan interactions are critical for an efficient and correct assembly of this specialized organelle.     

Assembly of the type II secretion system: identification of ExeA residues critical for peptidoglycan binding and secretin multimerization

Aeromonas hydrophila secretes a number of protein toxins across the outer membrane via the type II secretion system (T2SS). Assembly of the secretion channel ExeD secretin into the outer membrane is dependent on the peptidoglycan binding domain of ExeA. In this study, the peptidoglycan binding domain PF01471 family members were divided into a prokaryotic group and a eukaryotic group. By comparison of their sequence conservation profiles and their representative crystal structures, we found the prokaryotic members to have a highly conserved pocket(s) that is not present in the eukaryotic members. Substitution mutations of nine amino acids of the pocket were constructed in ExeA. Five of the substitution derivatives showed greatly decreased lipase secretion, accompanied by defects in secretin assembly. In addition, using in vivo cross-linking and in vitro cosedimentation assays, we showed that these mutations decreased ExeA-peptidoglycan interactions. These results suggest that the highly conserved pocket in ExeA is the binding site for its peptidoglycan ligand and identify residues critical for this binding.     

Molecular analysis of the Vibrio cholerae type II secretion ATPase EpsE

The type II secretion system is a macromolecular assembly that facilitates the extracellular translocation of folded proteins in gram-negative bacteria. EpsE, a member of this secretion system in Vibrio cholerae, contains a nucleotide-binding motif composed of Walker A and B boxes that are thought to participate in binding and hydrolysis of ATP and displays structural homology to other transport ATPases. Here we demonstrate that purified EpsE is an Mg2+-dependent ATPase and define optimal conditions for the hydrolysis reaction. EpsE displays concentration-dependent activity, which may suggest that the active form is oligomeric. Size exclusion chromatography showed that the majority of purified EpsE is monomeric; however, detailed analyses of specific activities obtained following gel filtration revealed the presence of a small population of active oligomers. We further report that EpsE binds zinc through a tetracysteine motif near its carboxyl terminus, yet metal displacement assays suggest that zinc is not required for catalysis. Previous studies describing interactions between EpsE and other components of the type II secretion pathway together with these data further support the hypothesis that EpsE functions to couple energy to the type II apparatus, thus enabling secretion.     

Structure and dynamic association of an assembly platform subcomplex of the bacterial type II secretion system

1. Download : Download high-res image (275KB)
2. Download : Download full-size image

     

The X-ray structure of the type II secretion system complex formed by the N-terminal domain of EpsE and the cytoplasmic domain of EpsL of Vibrio cholerae

Gram-negative bacteria use type II secretion systems for the transport of virulence factors and hydrolytic enzymes through the outer membrane. These sophisticated multi-protein complexes reach from the pore in the outer membrane via the pseudopilins in the periplasm and a multi-protein inner-membrane sub-complex, to an ATPase in the cytoplasm. The human pathogen Vibrio cholerae uses such a secretion machinery, called the Eps-system, for the export of its major virulence factor cholera toxin into the intestinal tract of the human host. Here, we describe the 2.4 A structure of the hetero-tetrameric complex of the N-terminal domain of the ATPase EpsE and the cytoplasmic domain of the inner membrane protein EpsL, which constitute the major cytoplasmic components of the Eps-system. A stable fragment of EpsE in complex with the cytoplasmic domain of EpsL was identified via limited proteolysis and facilitated the crystallization of the complex. This first structure of a complex between two different proteins of the type II secretion system reveals that the N-terminal domain of EpsE and the cytoplasmic domain of EpsL form a hetero-tetramer, in which EpsL is the central dimer and EpsE binds on the periphery. The dimer of EpsL in this complex is very similar to the dimer seen in the crystal structure of the native cytoplasmic domain of EpsL, suggesting a possible physiological relevance despite a relatively small 675 A2 buried solvent accessible surface. The N-terminal domain of EpsE, which forms a compact domain with an alpha+beta-fold, places its helix alpha2 in a mostly hydrophobic cleft between domains II and III of EpsL burying 1700 A2 solvent accessible surface. This extensive interface involves several residues whose hydrophobic or charged nature is well conserved and is therefore likely to be of general importance in type II secretion systems.     

Polar assembly of the type IV pilus secretin in Myxococcus xanthus

The type IV pilus filament of Myxococcus xanthus penetrates the outer membrane through a gated channel--the PilQ secretin. Assembly of the channel and formation of PilQ multimeric complexes that resist disassembly in heated detergent is correlated with the release of a 50 kDa fragment of PilQ. Tgl lipoprotein is required for PilQ assembly in M. xanthus, because PilQ monomers but no heat and detergent-resistant complexes are present in a strain from which tgl has been deleted. PilQ protein is often found in single patches at both poles of the cell. Tgl, however, is found in a patch at only one pole that most likely identifies the piliated cell pole. Tgl protein that has been transferred from another cell by contact stimulation leads to secretin assembly in the recipient. Pilus proteins PilQ, PilG, PilM, PilN, PilO and PilP are also required for the donation of Tgl by contact stimulation to a stimulation recipient. We suggest that these proteins are parts of a polar superstructure that holds PilQ monomers in a cluster and ready for Tgl to bring about secretin assembly.     

Involvement of the XpsN protein in formation of the XpsL-xpsM complex in Xanthomonas campestris pv. campestris type II secretion apparatus

The xps gene cluster is required for the second step of type II protein secretion in Xanthomonas campestris pv. campestris. Deletion of the entire gene cluster caused accumulation of secreted proteins in the periplasm. By analyzing protein abundance in the chromosomal mutant strains, we observed mutual dependence for normal steady-state levels between the XpsL and the XpsM proteins. The XpsL protein was undetectable in total lysate prepared from the xpsM mutant strain, and vice versa. Introduction of the wild-type xpsM gene carried on a plasmid into the xpsM mutant strain was sufficient for reappearance of the XpsL protein, and vice versa. Moreover, both XpsL and XpsM proteins were undetectable in the xpsN mutant strain. They were recovered either by reintroducing the wild-type xpsN gene or by introducing extra copies of wild-type xpsL or xpsM individually. Overproduction of wild-type XpsL and -M proteins simultaneously, but not separately, in the wild-type strain of X. campestris pv. campestris caused inhibition of secretion. Complementation of an xpsL or xpsM mutant strain with a plasmid-borne wild-type gene was inhibited by coexpression of XpsL and XpsM. The presence of the xpsN gene on the plasmid along with the xpsL and the xpsM genes caused more severe inhibition in both cases. Furthermore, complementation of the xpsN mutant strain was also inhibited. In both the wild-type strain and a strain with the xps gene cluster deleted (XC17433), carrying pCPP-LMN, which encodes all three proteins, each protein coprecipitated with the other two upon immunoprecipitation. Expression of pairwise combinations of the three proteins in XC17433 revealed that the XpsL-XpsM and XpsM-XpsN pairs still coprecipitated, whereas the XpsL-XpsN pair no longer coprecipitated.     

Type II secretion system secretin PulD localizes in clusters in the Escherichia coli outer membrane

The cellular localization of a chimera formed by fusing a monomeric red fluorescent protein to the C terminus of the Klebsiella oxytoca type II secretion system outer membrane secretin PulD (PulD-mCherry) in Escherichia coli was determined in vivo by fluorescence microscopy. Like PulD, PulD-mCherry formed sodium dodecyl sulfate- and heat-resistant multimers and was functional in pullulanase secretion. Chromosome-encoded PulD-mCherry formed fluorescent foci on the periphery of the cell in the presence of high (plasmid-encoded) levels of its cognate chaperone, the pilotin PulS. Subcellular fractionation demonstrated that the chimera was located exclusively in the outer membrane under these circumstances. A similar localization pattern was observed by fluorescence microscopy of fixed cells treated with green fluorescent protein-tagged affitin, which binds with high affinity to an epitope in the N-terminal region of PulD. At lower levels of (chromosome-encoded) PulS, PulD-mCherry was less stable, was located mainly in the inner membrane, from which it could not be solubilized with urea, and did not induce the phage shock response, unlike PulD in the absence of PulS. The fluorescence pattern of PulD-mCherry under these conditions was similar to that observed when PulS levels were high. The complete absence of PulS caused the appearance of bright and almost exclusively polar fluorescent foci.     

Complete type III secretion system of a mesophilic Aeromonas hydrophila strain

We have investigated the existence and genetic organization of a functional type III secretion system (TTSS) in a mesophilic Aeromonas strain by initially using the Aeromonas hydrophila strain AH-3. We report for the first time the complete TTSS DNA sequence of an Aeromonas strain that comprises 35 genes organized in a similar disposition as that in Pseudomonas aeruginosa. Using several gene probes, we also determined the presence of a TTSS in clinical or environmental strains of different Aeromonas species: A. hydrophila, A. veronii, and A. caviae. By using one of the TTSS genes (ascV), we were able to obtain a defined insertion mutant in strain AH-3 (AH-3AscV), which showed reduced toxicity and virulence in comparison with the wild-type strain. Complementation of the mutant strain with a plasmid vector carrying ascV was fully able to restore the wild-type toxicity and virulence.     

Composition of the type VII secretion system membrane complex

Pathogenic mycobacteria require type VII secretion (T7S) systems to transport virulence factors across their complex cell envelope. These bacteria have up to five of these systems, termed ESX‐1 to ESX‐5. Here, we show that ESX‐5 of Mycobacterium tuberculosis mediates the secretion of EsxN, PPE and PE_PGRS proteins, indicating that ESX‐5 is a major secretion pathway in this important pathogen. Using the ESX‐5 system of Mycobacterium marinum and Mycobacterium bovis BCG as a model, we have purified and analysed the T7S membrane complex under native conditions. blue native‐PAGE and immunoprecipitation experiments showed that the ESX‐5 membrane complex of both species has a size of ～ 1500 kDa and is composed of four conserved membrane proteins, i.e. EccB₅, EccC₅, EccD₅ and EccE₅. Subsequent limited proteolysis suggests that EccC₅ and EccE₅ mostly reside on the periphery of the complex. We also observed that EccC₅ and EccD₅ expression is essential for the formation of a stable membrane complex. These are the first data on a T7S membrane complex and, given the high conservation of its components, our data can likely be generalized to most mycobacterial T7S systems.     

VgrG-dependent effectors and chaperones modulate the assembly of the type VI secretion system

The type VI secretion system (T6SS) is a spear-like nanomachine found in gram-negative pathogens for delivery of toxic effectors to neighboring bacterial and host cells. Its assembly requires a tip spike complex consisting of a VgrG-trimer, a PAAR protein, and the interacting effectors. However, how the spike controls T6SS assembly remains elusive. Here we investigated the role of three VgrG-effector pairs in Aeromonas dhakensis strain SSU, a clinical isolate with a constitutively active T6SS. By swapping VgrG tail sequences, we demonstrate that the C-terminal ~30 amino-acid tail dictates effector specificity. Double deletion of vgrG1&2 genes (VgrG3⁺) abolished T6SS secretion, which can be rescued by ectopically expressing chimeric VgrG3 with a VgrG1/2-tail but not the wild type VgrG3. In addition, deletion of effector-specific chaperones also severely impaired T6SS secretion, despite the presence of intact VgrG and effector proteins, in both SSU and Vibrio cholerae V52. We further show that SSU could deliver a V. cholerae effector VasX when expressing a plasmid-borne chimeric VgrG with VasX-specific VgrG tail and chaperone sequences. Pull-down analyses show that two SSU effectors, TseP and TseC, could interact with their cognate VgrGs, the baseplate protein TssK, and the key assembly chaperone TssA. Effectors TseL and VasX could interact with TssF, TssK and TssA in V. cholerae. Collectively, we demonstrate that chimeric VgrG-effector pairs could bypass the requirement of heterologous VgrG complex and propose that effector-stuffing inside the baseplate complex, facilitated by chaperones and the interaction with structural proteins, serves as a crucial structural determinant for T6SS assembly.     

Structure and assembly of type VI secretion system cargo delivery vehicle

1. Download : Download high-res image (313KB)
2. Download : Download full-size image

     

Structure and electrophysiological properties of the YscC secretin from the type III secretion system of Yersinia enterocolitica

YscC is the integral outer membrane component of the type III protein secretion machinery of Yersinia enterocolitica and belongs to the family of secretins. This group of proteins forms stable ring-like oligomers in the outer membrane, which are thought to function as transport channels for macromolecules. The YscC oligomer was purified after solubilization from the membrane with a nonionic detergent. Sodium dodecyl sulfate did not dissociate the oligomer, but it caused a change in electrophoretic mobility and an increase in protease susceptibility, indicating partial denaturation of the subunits within the oligomer. The mass of the homo-oligomer, as determined by scanning transmission electron microscopy, was approximately 1 MDa. Analysis of the angular power spectrum from averaged top views of negatively stained YscC oligomers revealed a 13-fold angular order, suggesting that the oligomer consists of 13 subunits. Reconstituted in planar lipid bilayers, the YscC oligomer displayed a constant voltage-independent conductance of approximately 3 nS, thus forming a stable pore. However, in vivo, the expression of YscC did not lead to an increased permeability of the outer membrane. Electron microscopy revealed that the YscC oligomer is composed of three domains, two stacked rings attached to a conical domain. This structure is consistent with the notion that the secretin forms the upper part of the basal body of the needle structure of the type III secreton.     

Small-molecule type III secretion system inhibitors block assembly of the Shigella type III secreton

Type III secretion systems (T3SSs) are essential virulence devices for many gram-negative bacteria that are pathogenic for plants, animals, and humans. They serve to translocate virulence effector proteins directly into eukaryotic host cells. T3SSs are composed of a large cytoplasmic bulb and a transmembrane region into which a needle is embedded, protruding above the bacterial surface. The emerging antibiotic resistance of bacterial pathogens urges the development of novel strategies to fight bacterial infections. Therapeutics that rather than kill bacteria only attenuate their virulence may reduce the frequency or progress of resistance emergence. Recently, a group of salicylidene acylhydrazides were identified as inhibitors of T3SSs in Yersinia, Chlamydia, and Salmonella species. Here we show that these are also effective on the T3SS of Shigella flexneri, where they block all related forms of protein secretion so far known, as well as the epithelial cell invasion and induction of macrophage apoptosis usually demonstrated by this bacterium. Furthermore, we show the first evidence for the detrimental effect of these compounds on T3SS needle assembly, as demonstrated by increased numbers of T3S apparatuses without needles or with shorter needles. Therefore, the compounds generate a phenocopy of T3SS export apparatus mutants but with incomplete penetrance. We discuss why this would be sufficient to almost completely block the later secretion of effector proteins and how this begins to narrow the search for the molecular target of these compounds.