Measurement of spinal sagittal curvatures using the laser triangulation method

The purpose of the first part of the study was to establish the variability of repeated measurements in different measuring conditions. In the second part, we performed in a large number of patients, a measurement of thoracic kyphosis and lumbar lordosis and compared them to age, gender, and level of nourishment. In the first part, measurements were performed on a plastic model of the back of a patient with a rigid and a normal spine. In the second part, 250 patients participated in the study (126 men and 124 women). For measuring spinal curvatures we used an apparatus for laser triangulation constructed at the Faculty of Mechanical Engineering, University of Ljubljana. A comparison of 30 repeated measurements was shown as the average value +/- 2 SD which included 95% of the results. Thirty repeated readings of one 3D measurement: thoracic kyphosis 41.2 degrees +/- 0.6 degrees, lumbar lordosis 4.4 degrees +/- 1.2 degrees; 30 measurements on a plastic model: thoracic kyphosis 36.8 degrees +/- 1.2 degrees, lumbar lordosis 30.9 degrees +/- 2.0 degrees; 30 measurements on a patient with a rigid spine: thoracic kyphosis 41.5 degrees +/- 2.4 degrees, lumbar lordosis 4.0 degrees +/- 1.8 degrees; 30 measurements on a patient with a normal spine: thoracic kyphosis 48.8 degrees +/- 7.4 degrees, lumbar lordosis 21.1 degrees +/- 4.4 degrees. The average size of thoracic kyphosis in 250 patients was 46.8 degrees (SD 10.1 degrees) and lumbar lordosis 31.7 degrees (SD 12.5 degrees). The angle size was statistically significantly correlated to gender (increased thoracic kyphosis and lumbar lordosis in women) and body mass index (increased thoracic kyphosis and lumbar lordosis in more nourished patients). Age was not significantly correlated to the observed angles. During measurements of the spinal angles it was important to pay attention to relaxation and the patient's position as well as to perform more measurements providing the average value. The age and the level of nourishment influence the size of the sagittal spinal angles. In the observed sample the effect of age was not confirmed.     

Comparison of posture among adolescent male volleyball players and non-athletes

Due to high training loads and frequently repeated unilateral exercises, several types of sports training can have an impact on the process of posture development in young athletes. The objective of the study was to assess and compare the postures of adolescent male volleyball players and their non-training peers. The study group comprised 104 volleyball players while the control group consisted of 114 non-training individuals aged 14-16 years. Body posture was assessed by the Moiré method. The volleyball players were significantly taller, and had greater body weight and fat-free mass. The analysis of posture relative to symmetry in the frontal and transverse planes did not show any significant differences between the volleyball players and non-athletes. Postural asymmetries were observed in both the volleyball players and the control participants. Lumbar lordosis was significantly less defined in the volleyball players compared to non-training individuals while no difference was observed in thoracic kyphosis. All athletes demonstrated a loss of lumbar lordosis and an increase in thoracic kyphosis. Significant differences in anteroposterior curvature of the spine between the volleyball players and the non-athletes might be associated with both training and body height. Considering the asymmetric spine overloads which frequently occur in sports training, meticulous posture assessment in young athletes seems well justified.     

Straight back syndrome. Case report]

Straight back syndrome results from the shortening of the distance between the sternum and thoracic spine leading to a compression of the heart. The syndrome is caused by the lack of spine kyphosis or cobbler's chest. Straight back syndrome produces sometimes clinical symptoms suggesting acquired heart abnormalities. However, hemodynamic cardiac functioning is normal. Prognosis is this syndrome is favourable. Straight back syndrome caused by the lack of thoracic spine kyphosis was diagnosed in a 26-year patient admitted to the hospital with suspected heart abnormality and epilepsy.     

Trunk Muscle Activity Is Modified in Osteoporotic Vertebral Fracture and Thoracic Kyphosis with Potential Consequences for Vertebral Health

This study explored inter-relationships between vertebral fracture, thoracic kyphosis and trunk muscle control in elderly people with osteoporosis. Osteoporotic vertebral fractures are associated with increased risk of further vertebral fractures; but underlying mechanisms remain unclear. Several factors may explain this association, including changes in postural alignment (thoracic kyphosis) and altered trunk muscle contraction patterns. Both factors may increase risk of further fracture because of increased vertebral loading and impaired balance, which may increase falls risk. This study compared postural adjustments in 24 individuals with osteoporosis with and without vertebral fracture and with varying degrees of thoracic kyphosis. Trunk muscle electromyographic activity (EMG) associated with voluntary arm movements was recorded and compared between individuals with and without vertebral fracture, and between those with low and high thoracic kyphosis. Overall, elderly participants in the study demonstrated co-contraction of the trunk flexor and extensor muscles during forwards arm movements, but those with vertebral fractures demonstrated a more pronounced co-contraction than those without fracture. Individuals with high thoracic kyphosis demonstrated more pronounced alternating flexor and extensor EMG bursts than those with less kyphosis. Co-contraction of trunk flexor and extensor muscles in older individuals contrasts the alternating bursts of antagonist muscle activity in previous studies of young individuals. This may have several consequences, including altered balance efficacy and the potential for increased compressive loads through the spine. Both of these outcomes may have consequences in a population with fragile vertebrae who are susceptible to fracture.     

Differences on spinal curvature in standing position by gender, age and weight status using a noninvasive method

This aim was to examine differences on lumbar lordosis and thoracic kyphosis in standing position by gender, age and weight status in healthy subjects using a noninvasive method. A total of 297 women (36.6 ± 7.3 years) and 362 men (39.8 ± 7.5 years) participated in this study. Participants were categorized according to the international BMI (kg/m2) cut-off points. Age was stratified by ten years increments starting from 20 y. Men showed smaller lumbar lordosis (17.3 ± 9.3) and larger thoracic kyphosis (42.8 ± 8.8°) than women (29.6 ± 11.3 and 40.4 ± 9.5° respectively; both p < .001). Older groups presented smaller lumbar lordosis and larger thoracic kyphosis values compared with the 20-29 y group (20.9 ± 10.4, 20.8 ± 11.2 and 23.6 ± 12.6° for ≥ 50, 40-49 and 30-39 y, respectively vs. 26.7 ± 12.2° for 20-29 y in lumbar lordosis and 42.6 ± 9.8, 42.61 ± 8.7 and 41.8 ± 8.9° for ≥ 50, 40-49 and 30-39 y, respectively vs. 37.5 ± 10.9° for 20-29 y in thoracic kyphosis; both p < .05). Finally, overweight and obese groups showed smaller lumbar lordosis (19.4 ± 11.1 and 20.9 ± 11.8° respectively) and larger thoracic kyphosis values (42.7 ± 8.9 and 42.8 ± 9.4° respectively) compared with nonoverweight participants (25.1 ± 12.4 and 40.6 ± 9.2° for lumbar lordosis and thoracic kyphosis respectively; all p < .05). However, when gender, age and weight status were take into account all together only gender seems to influence the lumbar lordosis curvature. The results of this study suggest that gender could be the only determinant factor of lumbar lordosis in healthy people.     

Between-session reliability of opto-electronic motion capture in measuring sagittal posture and 3-D ranges of motion of the thoracolumbar spine

This study evaluated between-session reliability of opto-electronic motion capture to measure trunk posture and three-dimensional ranges of motion (ROM). Nineteen healthy participants aged 24–74 years underwent spine curvature, pelvic tilt and trunk ROM measurements on two separate occasions. Rigid four-marker clusters were attached to the skin overlying seven spinous processes, plus single markers on pelvis landmarks. Rigid body rotations of spine marker clusters were calculated to determine neutral posture and ROM in flexion, extension, total lateral bending (left-right) and total axial rotation (left-right). Segmental spine ROM values were in line with previous reports using opto-electronic motion capture. Intraclass correlation coefficients (ICC) and standard error of measurement (SEM) were calculated as measures of between-session reliability and measurement error, respectively. Retroreflective markers showed fair to excellent between-session reliability to measure thoracic kyphosis, lumbar lordosis, and pelvic tilt (ICC = 0.82, 0.63, and 0.54, respectively). Thoracic and lumbar segments showed highest reliabilities in total axial rotation (ICC = 0.78) and flexion-extension (ICC = 0.77–0.79) ROM, respectively. Pelvic segment showed highest ICC values in flexion (ICC = 0.78) and total axial rotation (ICC = 0.81) trials. Furthermore, it was estimated that four or fewer repeated trials would provide good reliability for key ROM outcomes, including lumbar flexion, thoracic and lumbar lateral bending, and thoracic axial rotation. This demonstration of reliability is a necessary precursor to quantifying spine kinematics in clinical studies, including assessing changes due to clinical treatment or disease progression.     

Flexion-extension movements in the adult thoracic spine

The flexion-extension mobility of the thoracic spine was studied by examining 120 patients who had no complaints about the thoracic spine. Its quantitative characteristics that assess the contribution of some segments to the movements of the thoracic spine were developed. Sexual differences of the developed quantitative characteristics of the motor function of the thoracic spine were defined. The specific features of changes in the motor function were analyzed in adult females and males.     

The effect of axial load on the sagittal plane curvature of the upright human spine in vivo

Determining the effect of load carriage on the human spine in vivo is important for determining spinal forces and establishing potential mechanisms of back injury. Previous studies have suggested that the natural curvature of the spine straightens under load, but are based on modelling and external measurements from the surface of the back. In the current study, an upright positional MRI scanner was used to acquire sagittal images of the lumbar and lower thoracic spine of 24 subjects. The subjects were imaged in standing whilst supporting 0, 8 and 16kg of load which was applied axially across the shoulders using an apron. An active shape model of the vertebral bodies from T10 to S1 was created and used to characterise the effect of load. The results from the shape model showed that the behaviour of the average-shaped spine was to straighten slightly. However, the shape model also showed that the effect of load exhibited systematic variation between individuals. Those who had a smaller than average curvature before loading straightened under load, whereas those who had a greater than average curvature before loading showed an increase in curvature under load. The variation in behaviour of differently shaped spines may have further implications for the effects of load in lifting manoeuvres and in understanding the aetiology of back pain.     

MSCT-3D技术在动物与人骨骼形态比较研究中的应用

目的应用MSCT-3D显示技术比较正常贵州香猪、Marshall比格犬、恒河猴与人上肢带骨及躯干骨的形态学差异。方法采用MSCT分别对贵州香猪、比格犬和恒河猴进行CT全身扫描并进行图像重建,观察其上肢带骨、躯干骨形态结构与人的异同。结果比格犬、恒河猴、贵州香猪脊椎骨和肋的基本组成与人相同,脊椎骨由椎体和附件组成,肋骨包括真肋、假肋和浮肋。而脊柱曲度、各段椎骨数目、胸骨结构、肋的数目、胸肋连接、上肢带骨的组成与人不同,恒河猴的脊柱曲度和上肢带骨连接与人相同,有颈、胸、腰、骶四个生理性弯曲并由锁骨和肩胛骨共同连接自由上肢骨,比格犬和贵州香猪只有颈、胸腰、骶三个生理性弯曲,仅由肩胛骨连接自由上肢骨。结论恒河猴躯干骨和上肢带骨与人有良好的相似性,而比格犬和贵州香猪与人差别较大。MSCT-3D技术为实验动物形态学比较研究提供了一种相对无创、快速、可以在体研究并动态连续观察的科学有效方法。     

Using Skin Markers for Spinal Curvature Quantification in Main Thoracic Adolescent Idiopathic Scoliosis: An Explorative Radiographic Study

Background and Purpose

Although the relevance of understanding spinal kinematics during functional activities in patients with complex spinal deformities is undisputed among researchers and clinicians, evidence using skin marker-based motion capture systems is still limited to a handful of studies, mostly conducted on healthy subjects and using non-validated marker configurations. The current study therefore aimed to explore the validity of a previously developed enhanced trunk marker set for the static measurement of spinal curvature angles in patients with main thoracic adolescent idiopathic scoliosis. In addition, the impact of inaccurate marker placement on curvature angle calculation was investigated.

Methods

Ten patients (Cobb angle: 44.4±17.7 degrees) were equipped with radio-opaque markers on selected spinous processes and underwent a standard biplanar radiographic examination. Subsequently, radio-opaque markers were replaced with retro-reflective markers and the patients were measured statically using a Vicon motion capture system. Thoracolumbar / lumbar and thoracic curvature angles in the sagittal and frontal planes were calculated based on the centers of area of the vertebral bodies and radio-opaque markers as well as the three-dimensional position of the retro-reflective markers. To investigate curvature angle estimation accuracy, linear regression analyses among the respective parameters were used. The impact of inaccurate marker placement was explored using linear regression analyses among the radio-opaque marker- and spinous process-derived curvature angles.

Results and Discussion

The results demonstrate that curvatures angles in the sagittal plane can be measured with reasonable accuracy, whereas in the frontal plane, angles were systematically underestimated, mainly due to the positional and structural deformities of the scoliotic vertebrae. Inaccuracy of marker placement had a greater impact on thoracolumbar / lumbar than thoracic curvature angles. It is suggested that spinal curvature measurements are included in marker-based clinical gait analysis protocols in order to enable a deeper understanding of the biomechanical behavior of the healthy and pathological spine in dynamic situations as well as to comprehensively evaluate treatment effects.     

Conservative treatment in Scheuermann’s kyphosis: comparison between lateral curve and variation of the vertebral geometry

Background

Conservative treatment in the Scheuermann’s kyphosis obtain, during skeletal growth, remodelling of the deformed vertebras. In a previous paper on Scheuermann’s kyphosis, we have studied the geometry variations of all vertebrae included in the curve, before and after the treatment.

The purpose of this study was to confirm the effectiveness of conservative treatment in Scheuermann’s kyphosis and was to evaluate and compare the variation of the vertebral geometry with the curve trend in Cobb degrees, before and after conservative treatment.

Methods

From a consecutive series of patients, we selected 90 patients with thoracic Scheuermann’s kyphosis, treated using anti-gravity brace: 59 male, 31 female. The mean age at the beginning of the treatment was 14 years.

Radiographical measurements were performed on radiographs from a lateral projection, at the beginning (t1) and at the end of the treatment (t5). Vertebral geometry modifications at t1 and t5 were analysed according to the following parameters and evaluated by three independent observers: Anterior wedging angle (ALFA) of the apex vertebra and Posterior wall inclination (APOS) of the limiting lower vertebra. The curve was measured in Cobb degrees.

Results

The results from our study showed that of the 90 patients with a thoracic curve mean value of Cobb degrees was 57.8 ± 6.0 SD at t1 and 41.3 ± 5.6 SD at t5. The differences between t1(angle at baseline) and t5 (end of treatment) were calculated for Cobb, ALFA and APOS angle and were respectively −16.4 ± 4.5, −6.4 ± 1.4 and −2.7 ± 1.2; tested with paired t-test were significative (p < 0.01). The results of the regression analysis to test the relationship between the three measures for the kyphosis (Cobb degree, ALFA and APOS) showed that the best association was between Cobb t5 and ALFA t5 (p < 0.01) and Cobb t1 and APOS t1 (p < 0.01). No significative association was found between the difference between ALFA and APOS.

Conclusion

We sustain that using new parameters to study vertebral remodelling allows us to reach a better comprehension of Scheuermann spine response to anti-gravity brace treatment. Furthermore, the evaluation of the ALFA angle of the apex vertebra confirms to be more reliable than Cobb’s angle because it cannot be affected by the radiological position.

     

CT and radiographic analysis of sagittal profile changes following thoracoscopic anterior scoliosis surgery

ABSTRACT: BACKGROUND: Previous studies report an increase in thoracic kyphosis after anterior approaches and a flattening of sagittal contours following posterior approaches. Difficulties with measuring sagittal parameters on radiographs are avoided with reformatted sagittal CT reconstructions due to the superior endplate clarity afforded by this imaging modality. METHODS: A prospective study of 30 Lenke 1 adolescent idiopathic scoliosis (AIS) patients receiving selective thoracoscopic anterior spinal fusion (TASF) was performed. Participants had ethically approved low dose CT scans at minimum 24 months after surgery in addition to their standard care following surgery. The change in sagittal contours on supine CT was compared to standing radiographic measurements of the same patients and with previous studies. Inter-observer variability was assessed as well as whether hypokyphotic and normokyphotic patient groups responded differently to the thoracoscopic anterior approach. RESULTS: Mean T5-12 kyphosis Cobb angle increased by 11.8 degrees and lumbar lordosis increased by 5.9 degrees on standing radiographs two years after surgery. By comparison, CT measurements of kyphosis and lordosis increased by 12.3 degrees and 7.0 degrees respectively. 95% confidence intervals for inter-observer variability of sagittal contour measurements on supine CT ranged between 5-8 degrees. TASF had a slightly greater corrective effect on patients who were hypokyphotic before surgery compared with those who were normokyphotic. CONCLUSIONS: Restoration of sagittal profile is an important goal of scoliosis surgery, but reliable measurement with radiographs suffers from poor endplate clarity. TASF significantly improves thoracic kyphosis and lumbar lordosis while preserving proximal and distal junctional alignment in thoracic AIS patients. Supine CT allows greater endplate clarity for sagittal Cobb measurements and linear relationships were found between supine CT and standing radiographic measurements. In this study, improvements in sagittal kyphosis and lordosis following surgery were in agreement with prior anterior surgery studies, and add to the current evidence suggesting that anterior correction is more capable than posterior approaches of addressing the sagittal component of both the instrumented and adjacent non instrumented segments following surgical correction of progressive Lenke 1 idiopathic scoliosis.     

The effect of follower load on the intersegmental coupled motion characteristics of the human thoracic spine: An in vitro study using entire rib cage specimens

The mechanical coupling behaviour of the thoracic spine is still not fully understood. For the validation of numerical models of the thoracic spine, however, the coupled motions within the single spinal segments are of importance to achieve high model accuracy. In the present study, eight fresh frozen human thoracic spinal specimens (C7-L1, mean age 54 ± 6 years) including the intact rib cage were loaded with pure bending moments of 5 Nm in flexion/extension (FE), lateral bending (LB), and axial rotation (AR) with and without a follower load of 400 N. During loading, the relative motions of each vertebra were monitored. Follower load decreased the overall ROM (T1-T12) significantly (p < 0.01) in all primary motion directions (extension: −46%, left LB: −72%, right LB: −72%, left AR: −26%, right AR: −26%) except flexion (−36%). Substantial coupled motion was found in lateral bending with ipsilateral axial rotation, which increased after a follower load was applied, leading to a dominant axial rotation during primary lateral bending, while all other coupled motions in the different motion directions were reduced under follower load. On the monosegmental level, the follower load especially reduced the ROM of the upper thoracic spine from T1-T2 to T4-T5 in all motion directions and the ROM of the lower thoracic spine from T9-T10 to T11-T12 in primary lateral bending. The facet joints, intervertebral disc morphologies, and the sagittal curvature presumably affect the thoracic spinal coupled motions depending on axial compressive preloading. Using these results, the validation of numerical models can be performed more accurately.     

The shape and mobility of the thoracic spine in asymptomatic adults – A systematic review of in vivo studies

A comprehensive knowledge of the thoracic shape and kinematics is essential for effective risk prevention, diagnose and proper management of thoracic disorders and assessment of treatment or rehabilitation strategies as well as for in silico and in vitro models for realistic applications of boundary conditions.After an extensive search of the existing literature, this study summarizes 45 studies on in vivo thoracic kyphosis and kinematics and creates a systematic and detailed database. The thoracic kyphosis over T1–12 determined using non-radiological devices (34°) was relatively less than measured using radiological devices (40°) during standing. The majority of kinematical measurements are based on non-radiological devices. The thoracic range of motion (RoM) was greatest during axial rotation (40°), followed by lateral bending (26°), and flexion (21°) when determined using non-radiological devices during standing. The smallest RoM was identified during extension (13°). The lower thoracic level (T8–12) contributed more to the RoM than the upper (T1–4) and middle (T4–8) levels during flexion and lateral bending. During axial rotation and extension, the middle level (T4–8) contributed the most. Coupled motion was evident, mostly during lateral bending and axial rotation. With aging, the thoracic kyphosis increased by about 3° per decade, whereas the RoM decreased by about 5° per decade for all load directions. These changes with aging mainly occurred in the lower region (T6–12). The influence of sex on thoracic kyphosis and the RoM has been described as partly contradictory. Obesity was found to decrease the thoracic RoM. Studies comparing standing, sitting and lying reported the effect of posture as significant.     

Biomechanical modeling of posterior instrumentation of the scoliotic spine

Scoliosis is a three-dimensional deformation of the spine that can be treated by vertebral fusion using surgical instrumentation. However, the optimal configuration of instrumentation remains controversial. Simulating the surgical maneuvers with personalized biomechanical models may provide an analytical tool to determine instrumentation configuration during the pre-operative planning. Finite element models used in surgical simulations display convergence difficulties as a result of discontinuities and stiffness differences between elements. A kinetic model using flexible mechanisms has been developed to address this problem, and this study presents its use in the simulation of Cotrel-Dubousset Horizon surgical maneuvers. The model of the spine is composed of rigid bodies corresponding to the thoracic and lumbar vertebrae, and flexible elements representing the intervertebral structures. The model was personalized to the geometry of three scoliotic patients (with a thoracic Cobb angle of 45 degrees, 49 degrees and 39 degrees ). Binary joints and kinematic constraints were used to represent the rod-implant-vertebra joints. The correction procedure was simulated using three steps: (1) Translation of hooks and screws on the first rod; (2) 90 degrees rod rotation; (3) Hooks and screws look-up on the rod. After the simulation, slight differences of 0-6 degrees were found for the thoracic spine scoliosis and the kyphosis, and of 1-8 degrees for the axial rotation of the apical vertebra and for the orientation of the plane of maximum deformity, compared to the real post-operative shape of the patient. Reaction loads at the vertebra-implant link were mostly below 1000 N, while reaction loads at the boundary conditions (representing the overall action of the surgeon) were in the range 7-470 N and maximum torque applied to the rod was 1.8 Nm. This kinetic modeling approach using flexible mechanisms provided a realistic representation of the surgical maneuvers. It may offer a tool to predict spinal geometry correction and assist in the pre-operative planning of surgical instrumentation of the scoliotic spine.     

Mice with a targeted deletion of the tetranectin gene exhibit a spinal deformity

Tetranectin is a plasminogen-binding, homotrimeric protein belonging to the C-type lectin family of proteins. Tetranectin has been suggested to play a role in tissue remodeling, due to its ability to stimulate plasminogen activation and its expression in developing tissues such as developing bone and muscle. To test the functional role of tetranectin directly, we have generated mice with a targeted disruption of the gene. We report that the tetranectin-deficient mice exhibit kyphosis, a type of spinal deformity characterized by an increased curvature of the thoracic spine. The kyphotic angles were measured on radiographs. In 6-month-old normal mice (n = 27), the thoracic angle was 73 degrees +/- 2 degrees, while in tetranectin-deficient 6-month-old mice (n = 35), it was 93 degrees +/- 2 degrees (P < 0.0001). In approximately one-third of the mutant mice, X-ray analysis revealed structural changes in the morphology of the vertebrae. Histological analysis of the spines of these mice revealed an apparently asymmetric development of the growth plate and of the intervertebral disks of the vertebrae. In the most advanced cases, the growth plates appeared disorganized and irregular, with the disk material protruding through the growth plate. Tetranectin-null mice had a normal peak bone mass density and were not more susceptible to ovariectomy-induced osteoporosis than were their littermates as determined by dual-emission X-ray absorptiometry scanning. These results demonstrate that tetranectin plays a role in tissue growth and remodeling. The tetranectin-deficient mouse is the first mouse model that resembles common human kyphotic disorders, which affect up to 8% of the population.     

Motor variability during a repetitive lifting task is impaired by wearing a passive back-support exoskeleton

PurposeEvaluate whether wearing a passive back-support exoskeleton during repetitive lifting impairs motor variability of erector spinae muscle and spine movement and whether this association is influenced by lifting style.Scope: Thirty-six healthy males performed ten lifts in four randomized conditions with exoskeleton (without, with) and lifting style (squat, stoop) as dependent variables. One lifting cycle contained four phases: bending/straighten without/with load. Erector spinae muscular activity, thoracic kyphosis and lumbar lordosis were measured with surface electromyography and gravimetric position sensors, respectively. Absolute and relative cycle-to-cycle variability were calculated. The effects of exoskeleton and exoskeleton × lifting style were assessed on outcomes during the complete lifting cycle and its four phases.ResultsFor the complete lifting cycle, muscular variability and thoracic kyphosis variability decreased whereas lumbar lordosis variability increased with exoskeleton. For lifting phases, effects of exoskeleton were mixed. Absolute and relative muscular variability showed a significant interaction effect for the phase straighten with load; variability decreased with exoskeleton during squat lifting.ConclusionUsing the exoskeleton impaired several motor variability parameters during lifting, supporting previous findings that exoskeletons may limit freedom of movement. The impact of this result on longer-term development of muscular fatigue or musculoskeletal disorders cannot yet be estimated.     

Monitoring of spine curvatures and posture during pregnancy using surface topography – case study and suggestion of method

Background

Low back and pelvic pain is one of the most frequently reported disorders in pregnancy, however etiology and pathology of this problem have not been fully determined. The relationship between back pain experienced during pregnancy and posture remains unclear. It is challenging to measure reliably postural and spinal changes at the time of pregnancy, since most imaging studies cannot be used due to the radiation burden. 3D shape measurement, or surface topography (ST), systems designed for posture evaluation could potentially fill this void. A pilot study was conducted to test the potential of monitoring the change of spine curvatures and posture during pregnancy using surface topography. A single case was studied to test the methodology and preliminarily assess the usefulness of the procedure before performing a randomized trial. The apparatus used in this study was metrologically tested and utilized earlier in scoliosis screening.

Case presentation

The subject was measured using a custom-made structured light illumination scanner with accuracy of 0.2 mm. Measurement was taken every 2 weeks, between 17th and 37th week of pregnancy, 11 measurements in total. From the measurement the thoracic kyphosis and lumbar lordosis angles, and vertical balance angle were extracted automatically. Custom-written software was used for analysis. Oswestry Low Back Pain Disability Questionnaire (ODI) was done with every measurement. The values were correctly extracted from the measurement. The results were: 50.9 ± 2.4° for kyphosis angle, 58.1 ± 2.1° for lordosis angle and 4.7 ± 1.7° for vertical balance angle. The registered change was 7.4° in kyphosis angle, 8.4° in lordosis angle and 5.5° in vertical balance angle. The calculated ODI values were between moderate disability and severe disability (22 to 58 %).

Conclusions

This case study presents that surface topography may be suitable for monitoring of spinal curvature and posture change in pregnant women. The ionizing radiation studies are contraindicated during pregnancy. Surface topography data connected with information from pain level questionnaires allows to investigate the connection between changes in posture and back pain.

     

Sagittal plane assessment of spino-pelvic complex in a Central European population with adolescent idiopathic scoliosis: a case control study

Background

Scoliosis is a complex three-dimensional deformity. While the frontal profile is well understood, increasing attention has turned to balance in the sagittal plane. The present study evaluated changes in sagittal spino-pelvic parameters in a large Hungarian population with adolescent idiopathic scoliosis.

Methods

EOS 2D/3D images of 458 scoliotic and 69 control cases were analyzed. After performing 3D reconstructions, the sagittal parameters were assessed as a whole and by curve type using independent sample t test and linear regression analysis.

Results

Patients with scoliosis had significantly decreased thoracic kyphosis (p <?0.001) with values T1–T12, 34.1?±?17.1^o vs. 43.4?±?12.7^o in control; T4–T12, 27.1?±?18.8^o vs. 37.7?±?15.1^o in control; and T5–T12, 24.9?±?15.8^o vs. 32.9?±?15.0^o in control. Changes in thoracic kyphosis correlated with magnitude of the Cobb angle (p <?0.001). No significant change was found in lumbar lordosis and the pelvic parameters. After substratification according to the Lenke classification and individually evaluating subgroups, results were similar with a significant decrease in only the thoracic kyphosis. A strong correlation was seen between sacral slope, pelvic incidence, and lumbar lordosis, and between pelvic version and thoracic kyphosis in control and scoliotic groups, whereas pelvic incidence was also seen to be correlated with thoracic kyphosis in scoliosis patients.

Conclusion

Adolescent idiopathic scoliosis patients showed a significant decrease in thoracic kyphosis, and the magnitude of the decrease was directly related to the Cobb angle. Changes in pelvic incidence were minimal but were also significantly correlated with thoracic changes. Changes were similar though not identical to those seen in other Caucasian studies and differed from those in other ethnicities. Scoliotic curves and their effect on pelvic balance must still be regarded as individual to each patient, necessitating individual assessment, although changes perhaps can be predicted by patient ethnicity.