Quantitative analysis of the effect of Acanthamoeba profilin on actin filament nucleation and elongation

The current view of the mechanism of action of Acanthamoeba profilin is that it binds to actin monomers, forming a complex that cannot polymerize [Tobacman, L. S., & Korn, E. D. (1982) J. Biol. Chem. 257, 4166-4170; Tseng, P., & Pollard, T. D. (1982) J. Cell Biol. 94, 213-218; Tobacman, L. S., Brenner, S. L., & Korn, E. D. (1983) J. Biol. Chem. 258, 8806-8812]. This simple model fails to predict two new experimental observations made with Acanthamoeba actin in 50 mM KC1, 1 mM MgCl2, and 1 mM EGTA. First, Acanthamoeba profilin inhibits elongation of actin filaments far more at the pointed end than at the barbed end. According, to the simple model, the Kd for the profilin-actin complex is less than 5 microM on the basis of observations at the pointed end and greater than 50 microM for the barbed end. Second, profilin inhibits nucleation more strongly than elongation. According to the simple model, the Kd for the profilin-actin complex is 60-140 microM on the basis of two assays of elongation but 2-10 microM on the basis of polymerization kinetics that reflect nucleation. These new findings can be explained by a new and more complex model for the mechanism of action that is related to a proposal of Tilney and co-workers [Tilney, L. G., Bonder, E. M., Coluccio, L. M., & Mooseker, M. S. (1983) J. Cell Biol. 97, 113-124]. In this model, profilin can bind both to actin monomers with a Kd of about 5 microM and to the barbed end of actin filaments with a Kd of about 50-100 microM. An actin monomer bound to profilin cannot participate in nucleation or add to the pointed end of an actin filament. It can add to the barbed end of a filament. When profilin is bound to the barbed end of a filament, actin monomers cannot bind to that end, but the terminal actin protomer can dissociate at the usual rate. This model includes two different Kd's--one for profilin bound to actin monomers and one for profilin bound to an actin molecule at the barbed end of a filament. The affinity for the end of the filament is lower by a factor of 10 than the affinity for the monomer, presumably due to the difference in the conformation of the two forms of actin or to steric constraints at the end of the filament.     

Kinetics of the interaction of a 41-kilodalton macrophage capping protein with actin: promotion of nucleation during prolongation of the lag period

A 41-kilodalton macrophage capping protein (MCP) has been isolated which is capable of forming complexes with actin monomers in addition to capping the barbed ends of actin filaments (Southwick & DiNubile, 1986). The protein is calcium activated in a fully reversible manner. Using kinetic assays, we determined a capping constant, defined here as a modified Kd, of 1 nM and a Kd of 3-4 microM for MCP-actin monomer complex formation. MCP weakly nucleates actin polymerization: more than 0.5 microM MCP is necessary to shorten the lag period, and 1 microM MCP at an actin/MCP ratio of 10 reduces the average length of actin filaments to about 200 molecules per filament. We determined that the actin nucleus that survives MCP inactivation contains a minimum number of five actin molecules. These experiments also make a point with respect to the interpretation of the prolongation of the lag period. We directly demonstrate that in the presence of an actin binding protein a prolongation of the lag period can be associated with increased nucleation, contrary to the usual interpretation in the literature that it indicates no or decreased nucleation by the actin binding protein.     

Capping Protein Terminates but Does Not Initiate Chemoattractant-induced Actin Assembly in Dictyostelium

The first step in the directed movement of cells toward a chemotactic source involves the extension of pseudopods initiated by the focal nucleation and polymerization of actin at the leading edge of the cell. We have previously isolated a chemoattractant-regulated barbed-end capping activity from Dictyostelium that is uniquely associated with capping protein, also known as cap32/34. Although uncapping of barbed ends by capping protein has been proposed as a mechanism for the generation of free barbed ends after stimulation, in vitro and in situ analysis of the association of capping protein with the actin cytoskeleton after stimulation reveals that capping protein enters, but does not exit, the cytoskeleton during the initiation of actin polymerization. Increased association of capping protein with regions of the cell containing free barbed ends as visualized by exogenous rhodamine-labeled G-actin is also observed after stimulation. An approximate threefold increase in the number of filaments with free barbed ends is accompanied by increases in absolute filament number, whereas the average filament length remains constant. Therefore, a mechanism in which preexisting filaments are uncapped by capping protein, in response to stimulation leading to the generation of free barbed ends and filament elongation, is not supported. A model for actin assembly after stimulation, whereby free barbed ends are generated by either filament severing or de novo nucleation is proposed. In this model, exposure of free barbed ends results in actin assembly, followed by entry of free capping protein into the actin cytoskeleton, which acts to terminate, not initiate, the actin polymerization transient.     

Dictyostelium discoideum plasma membranes contain an actin-nucleating activity that requires ponticulin, an integral membrane glycoprotein

In previous equilibrium binding studies, Dictyostelium discoideum plasma membranes have been shown to bind actin and to recruit actin into filaments at the membrane surface. However, little is known about the kinetic pathway(s) through which actin assembles at these, or other, membranes. We have used actin fluorescently labeled with N-(1- pyrenyl)iodoacetamide to examine the kinetics of actin assembly in the presence of D. discoideum plasma membranes. We find that these membranes increase the rate of actin polymerization. The rate of membrane-mediated actin polymerization is linearly dependent on membrane protein concentrations up to 20 micrograms/ml. Nucleation (the association of activated actin monomers into oligomers) appears to be the primary step of polymerization that is accelerated. A sole effect on the initial salt-induced actin conformational change (activation) is ruled out because membranes accelerate the polymerization of pre- activated actin as well as actin activated in the presence of membranes. Elongation of preexisting filaments also is not the major step of polymerization facilitated by membranes since membranes stripped of all peripheral components, including actin, increase the rate of actin assembly to about the same extent as do membranes containing small amounts of endogenous actin. Acceleration of the nucleation step by membranes also is supported by an analysis of the dependence of polymerization lag time on actin concentration. The barbed ends of membrane-induced actin nuclei are not obstructed by the membranes because the barbed end blocking agent, cytochalasin D, reduces the rate of membrane-mediated actin nucleation. Similarly, the pointed ends of the nuclei are not blocked by membranes since the depolymerization rate of gelsolin-capped actin is unchanged in the presence of membranes. These results are consistent with previous observations of lateral interactions between membranes and actin filaments. These results also are consistent with two predictions from a model based on equilibrium binding studies; i.e., that plasma membranes should nucleate actin assembly and that membrane-bound actin nuclei should have both ends free (Schwartz, M. A., and E. J. Luna. 1988. J. Cell Biol. 107:201-209). Integral membrane proteins mediate the actin nucleation activity because activity is eliminated by heat denaturation, treatment with reducing agents, or proteolysis of membranes. Activity also is abolished by solubilization with octylglucoside but is reconstituted upon removal or dilution of the detergent. Ponticulin, the major actin-binding protein in plasma membranes, appears to be necessary for nucleation activity since activity is not reconstituted from detergent extracts depleted of ponticulin.     

Rate constant for capping of the barbed ends of actin filaments by the gelsolin-actin complex

The rate of capping of actin filaments by the gelsolin-actin complex was measured by inhibition of elongation of the barbed ends of actin filaments. Polymeric actin (0.1-1.0 microM) was added to 0.5 microM monomeric actin and various concentrations of the gelsolin-actin complex (0.08-2.4 nM) to induce nucleated polymerization. As under the experimental conditions (2 mM MgCl2, 100 mM KCl, 37 degrees C, actin monomer concentration less than or equal to 0.5 microM) actin filaments treadmilled, filaments elongated only at the barbed ends and the gelsolin-actin complex did not nucleate actin filaments to polymerize towards the pointed ends. The rate of nucleated actin polymerization in the presence of the gelsolin-actin complex was quantitatively analyzed. The rate constant for capping of the barbed ends of actin filaments by the gelsolin-actin complex was found to be about 10(7) M-1 s-1.     

ADP-ribosylated actin caps the barbed ends of actin filaments

The mode of action on actin polymerization of skeletal muscle actin ADP-ribosylated on arginine 177 by perfringens iota toxin was investigated. ADP-ribosylated actin decreased the rate of nucleated actin polymerization at substoichiometric ratios of ADP-ribosylated actin to monomeric actin. ADP-ribosylated actin did not tend to copolymerize with actin. Actin filaments were depolymerized by the addition of ADP-ribosylated actin. The maximal monomer concentration reached by addition of ADP-ribosylated actin was similar to the critical concentration of the pointed ends of actin filaments. ADP-ribosylated actin had no effect on the rate of polymerization of gelsolin-capped actin filaments which polymerize at the pointed ends. The results suggest that ADP-ribosylated actin acts as a capping protein which binds to the barbed ends of actin filaments to inhibit polymerization. Based on an analysis of the depolymerizing effect of ADP-ribosylated actin, the equilibrium constant for binding of ADP-ribosylated actin to the barbed ends of actin filaments was determined to be about 10(8) M-1. As actin is ADP-ribosylated by perfringens iota toxin and by botulinum C2 toxin, it appears that conversion of actin into a capping protein by ADP-ribosylation is a pathophysiological reaction catalyzed by bacterial toxins which ultimately leads to inhibition of actin assembly.     

The Diaphanous-related formin dDia2 is required for the formation and maintenance of filopodia

Formins have important roles in the nucleation of actin and the formation of linear actin filaments, but their role in filopodium formation has remained elusive. Dictyostelium discoideum Diaphanous-related formin dDia2 is enriched at the tips of filopodia and interacts with profilin II and Rac1. An FH1FH2 fragment of dDia2 nucleated actin polymerization and removed capping protein from capped filament ends. Genetic studies showed that dDia2 is important for cell migration as well as the formation, elongation and maintenance of filopodia. Here we provide evidence that dDia2 specifically controls filopodial dynamics by regulating actin turnover at the barbed ends of actin filaments.     

Effects of CapZ, an actin capping protein of muscle, on the polymerization of actin

We have studied the interaction of CapZ, a barbed-end actin capping protein from the Z line of skeletal muscle, with actin. CapZ blocks actin polymerization and depolymerization (i.e., it "caps") at the barbed end with a Kd of approximately 0.5-1 nM or less, measured by three different assays. CapZ inhibits the polymerization of ATP-actin onto filament ends with ATP subunits slightly less than onto ends with ADP subunits, and onto ends with ADP-BeF3- subunits about as much as ends with ADP subunits. No effect of CapZ is seen at the pointed end by measurements either of polymerization from acrosomal processes or of the critical concentration for polymerization at steady state. CapZ has no measureable ability to sever actin filaments in a filament dilution assay. CapZ nucleates actin polymerization at a rate proportional to the first power of the CapZ concentration and the 2.5 power of the actin concentration. No significant binding is observed between CapZ and rhodamine-labeled actin monomers by fluorescence photobleaching recovery. These new experiments are consistent with but do not distinguish between three models for nucleation proposed previously (Cooper & Pollard, 1985). As a prelude to the functional studies, the purification protocol for CapZ was refined to yield 2 mg/kg of chicken breast muscle in 1 week. The activity is stable in solution and can be lyophilized. The native molecular weight is 59,600 +/- 2000 by equilibrium ultracentrifugation, and the extinction coefficient is 1.25 mL mg-1 cm-1 by interference optics. Polymorphism of the alpha and beta subunits has been detected by isoelectric focusing and reverse-phase chromatography. CapZ contains no phosphate (less than 0.1 mol/mol).     

Cdc42-induced actin filaments are protected from capping protein.

Each actin filament has a pointed and a barbed end, however, filament elongation occurs primarily at the barbed end. Capping proteins, by binding to the barbed end, can terminate this elongation. The rate of capping depends on the concentration of capping protein [1], and thus, if capping terminates elongation, the length of filaments should vary inversely with the concentration of capping protein. In cell extracts, such as those derived from neutrophils, new actin filaments can be nucleated by addition of GTPgammaS-activated Cdc42 (a small GTPase of the Rho family). To determine whether elongation of these filaments is terminated by capping, we manipulated the concentration of capping protein, the major calcium-independent capping protein in neutrophils, and observed the effects on filament lengths. Depletion of 70% of the capping protein from extracts increased the mean length of filaments elongated from spectrin-actin seeds (very short actin filaments with free barbed ends) but did not increase the mean length of filaments induced by Cdc42. Furthermore, doubling the concentration of capping protein in cell extracts by adding pure capping protein did not decrease the mean length of filaments induced by Cdc42. These results suggest that the barbed ends of Cdc42-induced filaments are protected from capping by capping protein.     

Control of actin assembly and disassembly at filament ends

The most important discovery in the field is that the Arp2/3 complex nucleates assembly of actin filaments with free barbed ends. Arp2/3 also binds the sides of actin filaments to create a branched network. Arp2/3's nucleation activity is stimulated by WASP family proteins, some of which mediate signaling from small G-proteins. Listeria movement caused by actin polymerization can be reconstituted in vitro using purified proteins: Arp2/3 complex, capping protein, actin depolymerizing factor/cofilin, and actin. actin depolymerizing factor/cofilin increases the rate at which actin subunits leave pointed ends, and capping protein caps barbed ends.     

Dynamics of capping protein and actin assembly in vitro: uncapping barbed ends by polyphosphoinositides

Bursts of actin polymerization in vivo involve the transient appearance of free barbed ends. To determine how rapidly barbed ends might appear and how long they might remain free in vivo, we studied the kinetics of capping protein, the major barbed end capper, binding to barbed ends in vitro. First, the off-rate constant for capping protein leaving a barbed end is slow, predicting a half-life for a capped barbed end of approximately 30 min. This half-life implies that cells cannot wait for capping protein to spontaneously dissociate from capped barbed ends in order to create free barbed ends. However, we find that phosphatidylinositol 4,5-bisphosphate (PIP2) and phosphatidylinositol 4- mono-phosphate (PIP) cause rapid and efficient dissociation of capping protein from capped filaments. PIP2 is a strong candidate for a second messenger regulating actin polymerization; therefore, the ability of PIP2 to remove capping protein from barbed ends is a potential mechanism for stimulating actin polymerization in vivo. Second, the on- rate constant for capping protein binding to free barbed ends predicts that actin filaments could grow to the length of filaments observed in vivo during one lifetime. Third, capping protein beta-subunit isoforms did not differ in their actin binding properties, even in tests with different actin isoforms. A major hypothesis for why capping protein beta-subunit isoforms exist is thereby excluded. Fourth, the proposed capping protein regulators, Hsc70 and S100, had no effect on capping protein binding to actin in vitro.     

Arabidopsis capping protein (AtCP) is a heterodimer that regulates assembly at the barbed ends of actin filaments

The precise regulation of actin filament polymerization and depolymerization is essential for many cellular processes and is choreographed by a multitude of actin-binding proteins (ABPs). In higher plants the number of well characterized ABPs is quite limited, and some evidence points to significant differences in the biochemical properties of apparently conserved proteins. Here we provide the first evidence for the existence and biochemical properties of a heterodimeric capping protein from Arabidopsis thaliana (AtCP). The purified recombinant protein binds to actin filament barbed ends with Kd values of 12-24 nM, as assayed both kinetically and at steady state. AtCP prevents the addition of profilin actin to barbed ends during a seeded elongation reaction and suppresses dilution-mediated depolymerization. It does not, however, sever actin filaments and does not have a preference for the source of actin. During assembly from Mg-ATP-actin monomers, AtCP eliminates the initial lag period for actin polymerization and increases the maximum rate of polymerization. Indeed, the efficiency of actin nucleation of 0.042 pointed ends created per AtCP polypeptide compares favorably with mouse CapZ, which has a maximal nucleation of 0.17 pointed ends per CapZ polypeptide. AtCP activity is not affected by calcium but is sensitive to phosphatidylinositol 4,5-bisphosphate. We propose that AtCP is a major regulator of actin dynamics in plant cells that, together with abundant profilin, is responsible for maintaining a large pool of actin subunits and a surprisingly small population of F-actin.     

Kinetic evidence for insertion of actin monomers between the barbed ends of actin filaments and barbed end-bound insertin, a protein purified from smooth muscle

An actin polymerization-retarding protein was isolated from chicken gizzard smooth muscle. This protein copurified with vinculin on DEAE-cellulose and gel filtration columns. The polymerization-retarding protein could be separated from vinculin by hydroxylapatite chromatography. The isolated polymerization-retarding protein lost its activity within a few days, but was stable for weeks when it was not separated from vinculin. We termed the polymerization-retarding protein "insertin". Because of the instability of the isolated insertin, we investigated the effect of insertin-vinculin on actin polymerization. Insertin-vinculin retarded nucleated actin polymerization maximally fivefold. Polymerization at the pointed ends of gelsolin-capped actin filaments was not affected by insertin-vinculin, suggesting that insertin-vinculin binds to the barbed ends, but not to the pointed ends, of actin filaments. Retarded polymerization was observed even if the actin monomer concentration was between the critical concentrations of the ends of treadmilling actin filaments. As at this low monomer concentration the pointed ends depolymerize, monomers appeared to be inserted at the barbed ends between the terminal subunit and barbed end-bound insertin molecules. Insertin-vinculin was found not to increase the actin monomer concentration to the value of the pointed ends. These observations support the conclusion that insertin is not a barbed end-capping protein but an actin monomer-inserting protein. According to a quantitative analysis of the kinetic data, all observations could be explained by a model in which two insertin molecules were assumed to bind co-operatively to the barbed ends of actin filaments. Actin monomers were found to be inserted between the barbed ends and barbed end-bound insertin molecules at a rate of about 1 x 10(6) M-1 s-1. Insertin may be an essential part of the machinery of molecules that permit treadmilling of actin filaments in living cells by insertion of actin molecules between membranes and actin filaments.     

Real-time measurements of actin filament polymerization by total internal reflection fluorescence microscopy

Understanding the mechanism of actin polymerization and its regulation by associated proteins requires an assay to monitor polymerization dynamics and filament topology simultaneously. The only assay meeting these criteria is total internal reflection fluorescence microscopy (Amann and Pollard, 2001; Fujiwara et al., 2002). The fluorescence signal is fourfold stronger with actin labeled on Cys-374 with Oregon green rather than rhodamine. To distinguish growth at barbed and pointed ends we used image drift correction and maximum intensity projections to reveal points where single N-ethylmaleimide inactivated myosins attach filaments to the glass coverslip. We estimated association rates at high actin concentrations and dissociation rates near and below the critical actin concentration. At the barbed end, the association rate constant for Mg-ATP-actin is 7.4 microM(-1) s(-1) and the dissociation rate constant is 0.89 s(-1). At the pointed end the association and dissociation rate constants are 0.56 microM(-1) s(-1) and 0.19 s(-1). When vitamin D binding protein sequesters all free monomers, ADP-actin dissociates from barbed ends at 1.4 s(-1) and from pointed ends at 0.16 s(-1) regardless of buffer nucleotide.     

An Arabidopsis Class II Formin,AtFH19, Nucleates Actin Assembly,Binds to the Barbed End of Actin Filaments and Antagonizes the Effect of AtFH1 on Actin Dynamics

Formin is a major protein responsible for regulating the nucleation of actin filaments, and as such, it permits the cell to control where and when to assemble actin arrays. It is encoded by a multigene family comprising 21 members in Arabidopsis thaliana. The Arabidopsis formins can be separated into two phylogenetically-distinct classes: there are 11 class I formins and 10 class II formins. Significant questions remain unanswered regarding the molecular mechanism of actin nucleation and elongation stimulated by each formin isovariant, and how the different isovariants coordinate to regulate actin dynamics in cells. Here, we characterize a class II formin, AtFH19, biochemically. We found that AtFH19 retains all general properties of the formin family, including nucleation and barbed end capping activity. It can also generate actin filaments from a pool of actin monomers bound to profilin. However, both the nucleation and barbed end capping activities of AtFH19 are less efficient compared to those of another well-characterized formin, AtFH1. Interestingly, AtFH19 FH1FH2 competes with AtFH1 FH1FH2 in binding actin filament barbed ends, and inhibits the effect of AtFH1 FH1FH2 on actin. We thus propose a mechanism in which two quantitatively different formins coordinate to regulate actin dynamics by competing for actin filament barbed ends.     

Purification and initial characterization of a protein from skeletal muscle that caps the barbed ends of actin filaments

We describe herein the purification of a protein from skeletal muscle that binds to ("caps") the morphologically defined barbed end of actin filaments. This actin-capping protein appeared to be a heterodimer with chemically and immunologically distinct subunits of Mr = 36,000 (alpha) and 32,000 (beta), Rs = 37 A, s20,w = 4.0 S, and a calculated native molecular weight of approximately 61,000. The protein was obtained in milligram quantities at greater than 95% purity from acetone powder of chicken skeletal muscle by extraction in 0.6 M KI, precipitation with ammonium sulfate, sequential chromatographic steps on DEAE-cellulose, hydroxylapatite, and Sephacryl S-200, followed by preparative rate zonal sucrose density gradient centrifugation. In immunoblots of myofibrillar proteins, affinity-purified antibodies selectively recognized protein bands of the same molecular weight as the subunits of the capping protein to which they were made, indicating that the isolated capping protein is a native myofibrillar protein, and not a proteolytic digestion product of a larger muscle protein. A specific interaction of the capping protein with the barbed end of actin filaments was indicated by its ability to inhibit actin filament assembly nucleated by spectrin-band 4.1-actin complex in 0.4 mM Mg2+, accelerate actin filament formation and increase the critical concentration of actin in 2-5 mM Mg2+, 75-100 mM KCl, and inhibit the addition of actin monomers to the barbed end of heavy meromyosin-decorated actin filaments as determined by electron microscopy. All of these effects occurred at nanomolar concentrations of capping protein and micromolar concentrations of actin, suggesting a high affinity interaction.     

The mouse formin, FRLalpha, slows actin filament barbed end elongation, competes with capping protein, accelerates polymerization from monomers, and severs filaments

Formins are a conserved class of proteins expressed in all eukaryotes, with known roles in generating cellular actin-based structures. The mammalian formin, FRLalpha, is enriched in hematopoietic cells and tissues, but its biochemical properties have not been characterized. We show that a construct composed of the C-terminal half of FRLalpha (FRLalpha-C) is a dimer and has multiple effects on muscle actin, including tight binding to actin filament sides, partial inhibition of barbed end elongation, inhibition of barbed end binding by capping protein, acceleration of polymerization from monomers, and actin filament severing. These multiple activities can be explained by a model in which FRLalpha-C binds filament sides but prefers the topology of sides at the barbed end (end-sides) to those within the filament. This preference allows FRLalpha-C to nucleate new filaments by side stabilization of dimers, processively advance with the elongating barbed end, block interaction between C-terminal tentacles of capping protein and filament end-sides, and sever filaments by preventing subunit re-association as filaments bend. Another formin, mDia1, does not reduce the barbed end elongation rate but does block capping protein, further supporting an end-side binding model for formins. Profilin partially relieves barbed end elongation inhibition by FRLalpha-C. When non-muscle actin is used, FRLalpha-C's effects are largely similar. FRLalpha-C's ability to sever filaments is the first such activity reported for any formin. Because we find that mDia1-C does not sever efficiently, severing may not be a property of all formins.     

Plant villin, lily P-135-ABP, possesses G-actin binding activity and accelerates the polymerization and depolymerization of actin in a Ca2+-sensitive manner

From germinating pollen of lily, two types of villins, P-115-ABP and P-135-ABP, have been identified biochemically. Ca(2+)-CaM-dependent actin-filament binding and bundling activities have been demonstrated for both villins previously. Here, we examined the effects of lily villins on the polymerization and depolymerization of actin. P-115-ABP and P-135-ABP present in a crude protein extract prepared from germinating pollen bound to a DNase I affinity column in a Ca(2+)-dependent manner. Purified P-135-ABP reduced the lag period that precedes actin filament polymerization from monomers in the presence of either Ca(2+) or Ca(2+)-CaM. These results indicated that P-135-ABP can form a complex with G-actin in the presence of Ca(2+) and this complex acts as a nucleus for polymerization of actin filaments. However, the nucleation activity of P-135-ABP is probably not relevant in vivo because the assembly of G-actin saturated with profilin, a situation that mimics conditions found in pollen, was not accelerated in the presence of P-135-ABP. P-135-ABP also enhanced the depolymerization of actin filaments during dilution-mediated disassembly. Growth from filament barbed ends in the presence of Ca(2+)-CaM was also prevented, consistent with filament capping activity. These results suggested that lily villin is involved not only in the arrangement of actin filaments into bundles in the basal and shank region of the pollen tube, but also in regulating and modulating actin dynamics through its capping and depolymerization (or fragmentation) activities in the apical region of the pollen tube, where there is a relatively high concentration of Ca(2+).     

Purification and characterization of aginactin, a newly identified agonist-regulated actin-capping protein from Dictyostelium amoebae.

Amoeboid chemotaxis involves a regulated increase in actin nucleation activity that is correlated with an increase in actin polymerization occurring seconds after chemotactic stimulation (Carson, M., Weber, A., and Zigmond, S. H. (1986) J. Cell Biol. 103, 2707-2714; Hall, A. L., Warren, V., Dharmawardhane, S., and Condeelis, J. (1989) J. Cell Biol. 109, 2207-2213). We report the isolation and characterization of an agonist-regulated capping protein, aginactin, from Dictyostelium that may regulate these changes in actin nucleation activity. Aginactin is isolated from low speed supernatants of starved amoebae by sequential anion exchange, hydrophobic interaction, fast protein liquid chromatography anion exchange, and hydroxyapatite chromatography. Aginactin migrates with an apparent molecular weight of 70,000 on sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels and gel filtration columns, suggesting that it is a globular monomer. Aginactin is a barbed-end capping protein by several criteria. It inhibits the rate and final extent of actin polymerization and increases the apparent critical concentration at substoichiometric ratios to actin. It also inhibits depolymerization of F-actin and inhibits polymerization at the barbed end of Limulus acrosomal bundles. Aginactin is unaffected by micromolar Ca2+, and it neither severs F-actin nor nucleates actin polymerization in either the presence or absence of Ca2+. Aginactin binds to and cosediments with F-actin and has an apparent Kd for capping F-actin of 2.7 nM.     

Tropomodulin caps the pointed ends of actin filaments

Many proteins have been shown to cap the fast growing (barbed) ends of actin filaments, but none have been shown to block elongation and depolymerization at the slow growing (pointed) filament ends. Tropomodulin is a tropomyosin-binding protein originally isolated from red blood cells that has been localized by immunofluorescence staining to a site at or near the pointed ends of skeletal muscle thin filaments (Fowler, V. M., M. A., Sussman, P. G. Miller, B. E. Flucher, and M. P. Daniels. 1993. J. Cell Biol. 120: 411-420). Our experiments demonstrate that tropomodulin in conjunction with tropomyosin is a pointed end capping protein: it completely blocks both elongation and depolymerization at the pointed ends of tropomyosin-containing actin filaments in concentrations stoichiometric to the concentration of filament ends (Kd < or = 1 nM). In the absence of tropomyosin, tropomodulin acts as a "leaky" cap, partially inhibiting elongation and depolymerization at the pointed filament ends (Kd for inhibition of elongation = 0.1-0.4 microM). Thus, tropomodulin can bind directly to actin at the pointed filament end. Tropomodulin also doubles the critical concentration at the pointed ends of pure actin filaments without affecting either the rate of extent of polymerization at the barbed filament ends, indicating that tropomodulin does not sequester actin monomers. Our experiments provide direct biochemical evidence that tropomodulin binds to both the terminal tropomyosin and actin molecules at the pointed filament end, and is the long sought-after pointed end capping protein. We propose that tropomodulin plays a role in maintaining the narrow length distributions of the stable, tropomyosin-containing actin filaments in striated muscle and in red blood cells.