Correlative 3D imaging of whole mammalian cells with light and electron microscopy

We report methodological advances that extend the current capabilities of ion-abrasion scanning electron microscopy (IA-SEM), also known as focused ion beam scanning electron microscopy, a newly emerging technology for high resolution imaging of large biological specimens in 3D. We establish protocols that enable the routine generation of 3D image stacks of entire plastic-embedded mammalian cells by IA-SEM at resolutions of ∼10–20 nm at high contrast and with minimal artifacts from the focused ion beam. We build on these advances by describing a detailed approach for carrying out correlative live confocal microscopy and IA-SEM on the same cells. Finally, we demonstrate that by combining correlative imaging with newly developed tools for automated image processing, small 100 nm-sized entities such as HIV-1 or gold beads can be localized in SEM image stacks of whole mammalian cells. We anticipate that these methods will add to the arsenal of tools available for investigating mechanisms underlying host-pathogen interactions, and more generally, the 3D subcellular architecture of mammalian cells and tissues.     

X-ray microscopy enables multiscale high-resolution 3D imaging of plant cells,tissues, and organs

Capturing complete internal anatomies of plant organs and tissues within their relevant morphological context remains a key challenge in plant science. While plant growth and development are inherently multiscale, conventional light, fluorescence, and electron microscopy platforms are typically limited to imaging of plant microstructure from small flat samples that lack a direct spatial context to, and represent only a small portion of, the relevant plant macrostructures. We demonstrate technical advances with a lab-based X-ray microscope (XRM) that bridge the imaging gap by providing multiscale high-resolution three-dimensional (3D) volumes of intact plant samples from the cell to the whole plant level. Serial imaging of a single sample is shown to provide sub-micron 3D volumes co-registered with lower magnification scans for explicit contextual reference. High-quality 3D volume data from our enhanced methods facilitate sophisticated and effective computational segmentation. Advances in sample preparation make multimodal correlative imaging workflows possible, where a single resin-embedded plant sample is scanned via XRM to generate a 3D cell-level map, and then used to identify and zoom in on sub-cellular regions of interest for high-resolution scanning electron microscopy. In total, we present the methodologies for use of XRM in the multiscale and multimodal analysis of 3D plant features using numerous economically and scientifically important plant systems.

Lab-based X-ray microscopy allows high-resolution 3D imaging of intact plant samples over a wide range of sample types and sizes, filling the imaging gap between light and electron microscopy.     

Towards native-state imaging in biological context in the electron microscope

Modern cell biology is reliant on light and fluorescence microscopy for analysis of cells, tissues and protein localisation. However, these powerful techniques are ultimately limited in resolution by the wavelength of light. Electron microscopes offer much greater resolution due to the shorter effective wavelength of electrons, allowing direct imaging of sub-cellular architecture. The harsh environment of the electron microscope chamber and the properties of the electron beam have led to complex chemical and mechanical preparation techniques, which distance biological samples from their native state and complicate data interpretation. Here we describe recent advances in sample preparation and instrumentation, which push the boundaries of high-resolution imaging. Cryopreparation, cryoelectron microscopy and environmental scanning electron microscopy strive to image samples in near native state. Advances in correlative microscopy and markers enable high-resolution localisation of proteins. Innovation in microscope design has pushed the boundaries of resolution to atomic scale, whilst automatic acquisition of high-resolution electron microscopy data through large volumes is finally able to place ultrastructure in biological context.     

High-resolution confocal imaging and three-dimensional rendering

Intrinsic opacity and inhomeogeniety of most biological tissues have prevented the efficient light penetration and signal detection for high-resolution confocal imaging of thick tissues. Here, we summarize recent technical advances in high-resolution confocal imaging for visualization of cellular structures and gene expression within intact whole-mount thick tissues. First, we introduce features of the FocusClear technology that render biological tissue transparent and thus improve the light penetration and signal detection. Next, a universal fluorescence staining method that labels all nuclei and membranes is described. We then demonstrate the postrecording image processing techniques for 3D visualization. From these images, regions of interest in the whole-mount brain can be segmented and volume rendered. Together, these technical advances in confocal microscopy allow visualization of structures within whole-mount tissues up to 1mm thick at a resolution similar to that of the observation of single cells in culture. Practical uses and limitations of these techniques are discussed.     

Advanced Correlative Light/Electron Microscopy: Current Methods and New Developments Using Tokuyasu Cryosections

Microscopy is an essential tool for analysis of cellular structures and function. With the advent of new fluorescent probes and super-resolution light microscopy techniques, the study of dynamic processes in living cells has been greatly facilitated. Fluorescence light microscopy provides analytical, quantitative, and three-dimensional (3D) data with emphasis on analysis of live cells using fluorescent markers. Sample preparation is easy and relatively inexpensive, and the use of appropriate tags provides the ability to track specific proteins of interest. Of course, only electron microscopy (EM) achieves the highest definition in terms of ultrastructure and protein labeling. To fill the gap between light microscopy and EM, correlative light and electron microscopy (CLEM) strategies have been developed. In particular, hybrid techniques based upon immuno-EM provide sensitive protein detection combined with high-resolution information on cell structures and protein localization. By adding the third dimension to EM with electron tomography (ET) combined with rapid freezing, CLEM techniques now provide additional tools for quantitative 3D analysis. Here, we overview the major methods applied and highlight the latest advances in the field of CLEM. We then focus on two selected techniques that use cryosections as substrate for combined biomolecular imaging. Finally, we provide a perspective of future developments in the field. (J Histochem Cytochem 57:1103–1112, 2009)     

Nano-fEM: Protein Localization Using Photo-activated Localization Microscopy and Electron Microscopy

Mapping the distribution of proteins is essential for understanding the function of proteins in a cell. Fluorescence microscopy is extensively used for protein localization, but subcellular context is often absent in fluorescence images. Immuno-electron microscopy, on the other hand, can localize proteins, but the technique is limited by a lack of compatible antibodies, poor preservation of morphology and because most antigens are not exposed to the specimen surface. Correlative approaches can acquire the fluorescence image from a whole cell first, either from immuno-fluorescence or genetically tagged proteins. The sample is then fixed and embedded for electron microscopy, and the images are correlated ^1-3. However, the low-resolution fluorescence image and the lack of fiducial markers preclude the precise localization of proteins. Alternatively, fluorescence imaging can be done after preserving the specimen in plastic. In this approach, the block is sectioned, and fluorescence images and electron micrographs of the same section are correlated ^4-7. However, the diffraction limit of light in the correlated image obscures the locations of individual molecules, and the fluorescence often extends beyond the boundary of the cell. Nano-resolution fluorescence electron microscopy (nano-fEM) is designed to localize proteins at nano-scale by imaging the same sections using photo-activated localization microscopy (PALM) and electron microscopy. PALM overcomes the diffraction limit by imaging individual fluorescent proteins and subsequently mapping the centroid of each fluorescent spot ^8-10. We outline the nano-fEM technique in five steps. First, the sample is fixed and embedded using conditions that preserve the fluorescence of tagged proteins. Second, the resin blocks are sectioned into ultrathin segments (70-80 nm) that are mounted on a cover glass. Third, fluorescence is imaged in these sections using the Zeiss PALM microscope. Fourth, electron dense structures are imaged in these same sections using a scanning electron microscope. Fifth, the fluorescence and electron micrographs are aligned using gold particles as fiducial markers. In summary, the subcellular localization of fluorescently tagged proteins can be determined at nanometer resolution in approximately one week.     

Recent Developments in Correlative Super-Resolution Fluorescence Microscopy and Electron Microscopy

The recently developed correlative super-resolution fluorescence microscopy (SRM) and electron microscopy (EM) is a hybrid technique that simultaneously obtains the spatial locations of specific molecules with SRM and the context of the cellular ultrastructure by EM. Although the combination of SRM and EM remains challenging owing to the incompatibility of samples prepared for these techniques, the increasing research attention on these methods has led to drastic improvements in their performances and resulted in wide applications. Here, we review the development of correlative SRM and EM (sCLEM) with a focus on the correlation of EM with different SRM techniques. We discuss the limitations of the integration of these two microscopy techniques and how these challenges can be addressed to improve the quality of correlative images. Finally, we address possible future improvements and advances in the continued development and wide application of sCLEM approaches.     

Single organelle dynamics linked to 3D structure by correlative live‐cell imaging and 3D electron microscopy

Live‐cell correlative light‐electron microscopy (live‐cell‐CLEM) integrates live movies with the corresponding electron microscopy (EM) image, but a major challenge is to relate the dynamic characteristics of single organelles to their 3‐dimensional (3D) ultrastructure. Here, we introduce focused ion beam scanning electron microscopy (FIB‐SEM) in a modular live‐cell‐CLEM pipeline for a single organelle CLEM. We transfected cells with lysosomal‐associated membrane protein 1‐green fluorescent protein (LAMP‐1‐GFP), analyzed the dynamics of individual GFP‐positive spots, and correlated these to their corresponding fine‐architecture and immediate cellular environment. By FIB‐SEM we quantitatively assessed morphological characteristics, like number of intraluminal vesicles and contact sites with endoplasmic reticulum and mitochondria. Hence, we present a novel way to integrate multiple parameters of subcellular dynamics and architecture onto a single organelle, which is relevant to address biological questions related to membrane trafficking, organelle biogenesis and positioning. Furthermore, by using CLEM to select regions of interest, our method allows for targeted FIB‐SEM, which significantly reduces time required for image acquisition and data processing.      

Specimen Preparation, Imaging, and Analysis Protocols for Knife-edge Scanning Microscopy

Major advances in high-throughput, high-resolution, 3D microscopy techniques have enabled the acquisition of large volumes of neuroanatomical data at submicrometer resolution. One of the first such instruments producing whole-brain-scale data is the Knife-Edge Scanning Microscope (KESM)^{7, 5, 9}, developed and hosted in the authors'' lab. KESM has been used to section and image whole mouse brains at submicrometer resolution, revealing the intricate details of the neuronal networks (Golgi)^{1, 4, 8}, vascular networks (India ink)^{1, 4}, and cell body distribution (Nissl)³. The use of KESM is not restricted to the mouse nor the brain. We have successfully imaged the octopus brain⁶, mouse lung, and rat brain. We are currently working on whole zebra fish embryos. Data like these can greatly contribute to connectomics research¹⁰; to microcirculation and hemodynamic research; and to stereology research by providing an exact ground-truth. In this article, we will describe the pipeline, including specimen preparation (fixing, staining, and embedding), KESM configuration and setup, sectioning and imaging with the KESM, image processing, data preparation, and data visualization and analysis. The emphasis will be on specimen preparation and visualization/analysis of obtained KESM data. We expect the detailed protocol presented in this article to help broaden the access to KESM and increase its utilization.     

综述: 冷冻超分辨光电融合成像技术 ——新挑战，新机遇

冷冻超分辨光电融合成像技术近年来发展迅速,该技术结合了荧光显微镜特异性标记与冷冻电镜超高分辨率的优势,成为细胞原位结构研究的新手段,有望发展成为下一代成像技术.本文从发展背景、应用领域等几个方面,介绍了冷冻超分辨光电融合成像技术的概况及未来发展前景.     

The integrative role of cryo electron microscopy in molecular and cellular structural biology

After gradually moving away from preparation methods prone to artefacts such as plastic embedding and negative staining for cell sections and single particles, the field of cryo electron microscopy (cryo‐EM) is now heading off at unprecedented speed towards high‐resolution analysis of biological objects of various sizes. This ‘revolution in resolution’ is happening largely thanks to new developments of new‐generation cameras used for recording the images in the cryo electron microscope which have much increased sensitivity being based on complementary metal oxide semiconductor devices. Combined with advanced image processing and 3D reconstruction, the cryo‐EM analysis of nucleoprotein complexes can provide unprecedented insights at molecular and atomic levels and address regulatory mechanisms in the cell. These advances reinforce the integrative role of cryo‐EM in synergy with other methods such as X‐ray crystallography, fluorescence imaging or focussed‐ion beam milling as exemplified here by some recent studies from our laboratory on ribosomes, viruses, chromatin and nuclear receptors. Such multi‐scale and multi‐resolution approaches allow integrating molecular and cellular levels when applied to purified or in situ macromolecular complexes, thus illustrating the trend of the field towards cellular structural biology.     

The CryoCapsule: Simplifying Correlative Light to Electron Microscopy

Correlating complementary multiple scale images of the same object is a straightforward means to decipher biological processes. Light microscopy and electron microscopy are the most commonly used imaging techniques, yet despite their complementarity, the experimental procedures available to correlate them are technically complex. We designed and manufactured a new device adapted to many biological specimens, the CryoCapsule, that simplifies the multiple sample preparation steps, which at present separate live cell fluorescence imaging from contextual high‐resolution electron microscopy, thus opening new strategies for full correlative light to electron microscopy. We tested the biological application of this highly optimized tool on three different specimens: the in vitro Xenopus laevis mitotic spindle, melanoma cells over‐expressing YFP‐langerin sequestered in organized membranous subcellular organelles and a pigmented melanocytic cell in which the endosomal system was labeled with internalized fluorescent transferrin.      

Correlation of 4Pi and Electron Microscopy to Study Transport Through Single Golgi Stacks in Living Cells with Super Resolution

Two problems have hampered the use of light microscopy for structural studies of cellular organelles for a long time: the limited resolution and the difficulty of obtaining true structural boundaries from complex intensity curves. The advent of modern high-resolution light microscopy techniques and their combination with objective image segmentation now provide us with the means to bridge the gap between light and electron microscopy in cell biology applications. In this study, we provide the first comparative correlative analysis of three-dimensional structures obtained by 4Pi microscopy and segmented by a zero-crossing procedure with those of transmission electron microscopy (TEM). The distribution within the cisternae of isolated Golgi stacks of the cargo protein procollagen 3 was mapped by both 4Pi microscopy and TEM for a detailed comparative analysis of their imaging capabilities. A high correlation was seen for the structures, indicating the particular accuracy of the 4Pi microscopy. Furthermore, for the first time, transport of a cargo molecule (vesicular stomatitis virus G protein-pEGFP) through individual Golgi stacks (labeled by galactosyl transferase-venusYFP) was visualized by 4Pi microscopy. Following the procedures validated by the correlative analysis, our transport experiments show that (i) VSVG-pEGFP rapidly enter/exit individual Golgi stacks, (ii) VSVG-pEGFP never fills the GalT-venusYFP compartments completely and (iii) the GalT-venusYFP compartment volume increases upon VSVG-pEGFP arrival. This morphological evidence supports some previous TEM-based observations of intra-Golgi transport of VSVG-pEGFP and provides new insights toward a better understanding of protein progression across Golgi stacks. Our study thus demonstrates the general applicability of super-resolution fluorescence microscopy, coupled with the zero-crossing segmentation procedure, for structural studies of suborganelle protein distributions under living cell conditions.     

冷冻聚焦离子束-扫描电镜成像技术研究进展

冷冻聚焦离子束-扫描电镜成像(Cryo-FIB-SEM)是一种新兴的成像检测技术,在原位进行冷冻聚焦离子束切割和冷冻扫描电镜成像,为研究天然含水状态下生物样品内部未被破坏的原始结构打开了一扇窗口。近年来,该技术在生命科学领域的应用研究取得了一系列重要进展。该文对其在冷冻体积连续成像、冷冻光电关联成像、冷冻透射扫描成像、冷冻含水切片制备监控及冷冻扫描图像处理等方面的研究进展进行综述,并展望了该技术在大体积生物样品三维原位成像研究领域的前沿性发展趋势,以期推动Cryo-FIB-SEM技术在生物样品三维结构研究中的应用。     

Reconstruction of 3-Dimensional Histology Volume and its Application to Study Mouse Mammary Glands

Histology volume reconstruction facilitates the study of 3D shape and volume change of an organ at the level of macrostructures made up of cells. It can also be used to investigate and validate novel techniques and algorithms in volumetric medical imaging and therapies. Creating 3D high-resolution atlases of different organs^1,2,3 is another application of histology volume reconstruction. This provides a resource for investigating tissue structures and the spatial relationship between various cellular features. We present an image registration approach for histology volume reconstruction, which uses a set of optical blockface images. The reconstructed histology volume represents a reliable shape of the processed specimen with no propagated post-processing registration error. The Hematoxylin and Eosin (H&E) stained sections of two mouse mammary glands were registered to their corresponding blockface images using boundary points extracted from the edges of the specimen in histology and blockface images. The accuracy of the registration was visually evaluated. The alignment of the macrostructures of the mammary glands was also visually assessed at high resolution.This study delineates the different steps of this image registration pipeline, ranging from excision of the mammary gland through to 3D histology volume reconstruction. While 2D histology images reveal the structural differences between pairs of sections, 3D histology volume provides the ability to visualize the differences in shape and volume of the mammary glands.     

Deposition of Sodium Metal at the Copper-NaSICON Interface for Reservoir-Free Solid-State Sodium Batteries

“Anode-free” solid-state battery concepts are explored extensively as they promise a higher energy density with less material consumption and simple anode processing. Here, the homogeneous and uniform electrochemical deposition of alkali metal at the interface between current collector and solid electrolyte plays the central role to form a metal anode within the first cycle. While the cathodic deposition of lithium has been studied intensively, knowledge on sodium deposition is scarce. In this work, dense and uniform sodium layers of several microns thickness are deposited at the Cu|Na_3.4Zr₂Si_2.4P_0.6O₁₂ interface with high reproducibility. At current densities of ≈1 mA∙cm⁻², relatively uniform coverage is achieved underneath the current collector, as shown by electrochemical impedance spectroscopy and 3D confocal microscopy. In contrast, only slight variations of the coverage are observed at different stack pressures. Early stages of the sodium metal growth are analyzed by in situ transmission electron microscopy revealing oriented growth of sodium. The results demonstrate that reservoir-free (“anode-free”) sodium-based batteries are feasible and may stimulate further research efforts in sodium-based solid-state batteries.     

Practical Image Restoration of Thick Biological Specimens Using Multiple Focus Levels in Transmission Electron Microscopy

Three-dimensional electron tomographic studies of thick specimens such as cellular organelles or supramolecular structures require accurate interpretations of transmission electron micrograph intensities. In addition to microscope lens aberrations, thick specimen imaging is complicated by additional distortions resulting from multiple elastic and inelastic scattering. Extensive analysis of the mechanism of image formation using electron energy-loss spectroscopy and imaging as well as exit wavefront reconstruction demonstrated that multiple scattering does not contribute to the coherent component of the exit wave (Hanet al.,1996, 1995). Although exit wavefront restored images showed enhanced contrast and resolution, that technique, which requires the collection of more than 30 images at different focus levels, is not practical for routine data collection in 3D electron tomography, where usually over 100 projection views are required for each reconstruction. Using a 0.7-μm-thick specimen imaged at 200 keV, the accuracy of reconstructions using small numbers of defocused images and a simple linear filter (Schiske, 1968) was assessed by comparison to the complete exit wave restoration. We demonstrate that only four optimal focus levels are required to effectively restore the coherent component (deviation 5.1%). By contrast, the optimal single image (zero defocus) shows a 25.5% deviation to the exit wave restoration. Two pairs of under- and over-defocus images should be taken: one pair at quite high defocus (>10 μm) to differentiate the coherent (single elastic scattering) from the incoherent (multiple elastic and inelastic scattering) components, and the second pair to optimize information content at the highest desired resolution (e.g., 5 μm for (2.5 nm)⁻¹resolution). We also propose a new interpretation of the restored amplitude and phase components where the specimen mass-density is proportional to the logarithm of the amplitude component and linearly related to the phase component. This approach should greatly facilitate the collection of high resolution tomographic data from thick samples.     

Fluorescence Microscopy Gets Faster and Clearer: Roles of Photochemistry and Selective Illumination

Significant advances in fluorescence microscopy tend be a balance between two competing qualities wherein improvements in resolution and low light detection are typically accompanied by losses in acquisition rate and signal-to-noise, respectively. These trade-offs are becoming less of a barrier to biomedical research as recent advances in optoelectronic microscopy and developments in fluorophore chemistry have enabled scientists to see beyond the diffraction barrier, image deeper into live specimens, and acquire images at unprecedented speed. Selective plane illumination microscopy has provided significant gains in the spatial and temporal acquisition of fluorescence specimens several mm in thickness. With commercial systems now available, this method promises to expand on recent advances in 2-photon deep-tissue imaging with improved speed and reduced photobleaching compared to laser scanning confocal microscopy. Superresolution microscopes are also available in several modalities and can be coupled with selective plane illumination techniques. The combination of methods to increase resolution, acquisition speed, and depth of collection are now being married to common microscope systems, enabling scientists to make significant advances in live cell and in situ imaging in real time. We show that light sheet microscopy provides significant advantages for imaging live zebrafish embryos compared to laser scanning confocal microscopy.     

Investigation of HIV‐1 Assembly and Release Using Modern Fluorescence Imaging Techniques

The replication of HIV‐1, like that of all viruses, is intimately connected with cellular structures and pathways. For many years, bulk biochemical and cell biological methods were the main approaches employed to investigate interactions between HIV‐1 and its host cell. However, during the past decade advancements in fluorescence imaging technologies opened new possibilities for the direct visualization of individual steps occurring throughout the viral replication cycle. Electron microscopy (EM) methods, which have traditionally been employed for the study of viruses, are complemented by fluorescence microscopy (FM) techniques that allow us to follow the dynamics of virus–cell interaction. Subdiffraction fluorescence microscopy, as well as correlative EM/FM approaches, are narrowing the fundamental gap between the high structural resolution provided by EM and the high temporal resolution and throughput accomplished by FM. The application of modern microscopy to the study of HIV‐1–host cell interactions has provided insights into the biology of the virus which could not easily, or not at all, have been gained by other methods. Here, we review how modern fluorescence imaging techniques enhanced our knowledge of the dynamic and structural changes involved in HIV‐1 particle formation.      

有机荧光团及荧光标记细胞的阴极荧光成像研究

目的 阴极荧光（CL）成像是一种以电子束为激发源的高分辨荧光成像技术,但生物材料对电子束的敏感性限制了CL技术在生命科学中的广泛应用。为了研究和发展CL技术在生物样品中的应用,本文旨在通过探究电子辐照引起碳基材料的结构损伤、有机基团的降解及荧光猝灭等问题,深入理解电子源对有机荧光团的激发特性。方法 本研究应用扫描电镜（SEM）和阴极荧光谱仪系统（SEM-CL）,研究电子源对有机荧光团及荧光探针标记细胞的激发特性,观测了有机物的CL信号的发射特性、强度衰减、成像方式及特点。结果 实验结果显示,在低能量（2.5～5 keV）和低束流（～10 pA）电子辐照下,有机荧光微珠发射出较强的荧光,CL像分辨率达到～30 nm。荧光微珠经过12 min辐照,信号强度衰减了25%,CL像仍保持了可接受的发光强度和足够的信噪比。此外,还获得了从细胞表面到内部一定深度内,荧光标记的亚细胞结构信息。结论 在SEM-CL系统中,可以同时获得由电子束激发产生的电子像和CL像,实现阴极荧光与电子显微镜关联（CCLEM）成像。本实验的研究结果为CCLEM技术应用于生物结构研究提供了数据及技术支持。