Tyrocidine A: crystal growth and preliminary x-ray diffraction data.

Tyrocidine A was crystallized from 2-methyl-2,4-pentanediol and water, or methanol, to yield crystals that are large enough for X-ray diffraction studies. Four crystals were examined; three were in equilibrium with mother liquor and the fourth was air-dried. They belong to the rhombohedral space group R32. Parameters of the hexagonal cell of the fully solvated crystals vary slightly and are approximately $\text{a = 34}\text{A}\text{?}\text{and}\text{c = 50}\text{A}\text{?}$. The asymmetric unit consists of one molecule of tyrocidine and several molecules of 2-methyl-2,4-pentanediol. Air-dried crystals appear to contain about half the number of solvent molecules. Three-dimensional X-ray diffraction data showing a maximum resolution of $\text{s = (1.7}\text{A}\text{?}\text{)}{}^{\mathrm{?1}}$ have been recorded.     

Using Soft X-Rays for a Detailed Picture of Divalent Metal Binding in the Nucleosome

Divalent metals associate with DNA in a site-selective manner, which can influence nucleosome positioning, mobility, compaction, and recognition by nuclear factors. We previously characterized divalent metal binding in the nucleosome core using hard (short-wavelength) X-rays allowing high-resolution crystallographic determination of the strongest affinity sites, which revealed that Mn²⁺ associates with the DNA major groove in a sequence- and conformation-dependent manner. In this study, we obtained diffraction data with soft X-rays at the Mn²⁺ absorption edge for a core particle crystal in the presence of 10 mM MnSO₄, mimicking prevailing Mg²⁺ concentration in the nucleus. This provides an exceptional view of counterion binding in the nucleosome through identification of 45 divalent metal binding sites.In addition to that at the well-characterized major interparticle interface, only one other histone-divalent metal binding site is found, which corresponds to a symmetry-related counterpart on the ‘free’ H2B α1 helix C-terminus. This emphasizes the importance of the α-helix dipole in ion binding and suggests that the H2B motif may serve as a nucleation site in nucleosome compaction. The 43 sites associated with the DNA are characterized by (1) high-affinity direct coordination at the most electrostatically favorable major groove locations, (2) metal hydrate binding to the major groove, (3) direct coordination to phosphate groups at sites of high charge density, (4) metal hydrate binding in the minor groove, or (5) metal hydrate-divalent anion pairing. Metal hydrates are found within the minor groove only at locations displaying a narrow range of high-intermediate width and to which histone N-terminal tails are not associated or proximal. This indicates that divalent metals and histone tails can both collaborate and compete in minor groove association, which sheds light on nucleosome solubility and chromatin compaction behavior.     

Crystal structures of monomeric actin bound to cytochalasin D

The fungal toxin cytochalasin D (CD) interferes with the normal dynamics of the actin cytoskeleton by binding to the barbed end of actin filaments. Despite its widespread use as a tool for studying actin-mediated processes, the exact location and nature of its binding to actin have not been previously determined. Here we describe two crystal structures of an expressed monomeric actin in complex with CD: one obtained by soaking preformed actin crystals with CD, and the other obtained by cocrystallization. The binding site for CD, in the hydrophobic cleft between actin subdomains 1 and 3, is the same in the two structures. Polar and hydrophobic contacts play equally important roles in CD binding, and six hydrogen bonds stabilize the actin-CD complex. Many unrelated actin-binding proteins and marine toxins target this cleft and the hydrophobic pocket at the front end of the cleft (viewing actin with subdomain 2 in the upper right corner). CD differs in that it binds to the back half of the cleft. The ability of CD to induce actin dimer formation and actin-catalyzed ATP hydrolysis may be related to its unique binding site and the necessity to fit its bulky macrocycle into this cleft. Contacts with residues lining this cleft appear to be crucial to capping and/or severing. The cocrystallized actin-CD structure also revealed changes in actin conformation. An ∼ 6° rotation of the smaller actin domain (subdomains 1 and 2) with respect to the larger domain (subdomains 3 and 4) results in small changes in crystal packing that allow the D-loop to adopt an extended loop structure instead of being disordered, as it is in most crystal structures of actin. We speculate that these changes represent a potential conformation that the actin monomer can adopt on the pathway to polymerization or in the filament.     

The Critical Roles of Residues P235 and F236 of Subunit A of the Motor Protein A-ATP Synthase in P-Loop Formation and Nucleotide Binding

The mutants P235A and F236A have been generated and their crystal structure was determined to resolutions of 2.38  and 2.35 Å, respectively, in order to understand the residues involved in the formation of the novel arched P-loop of subunit A of the A-ATP synthase from Pyrococcus horikoshii OT3. Both the structures show unique, altered conformations for the P-loop. Comparison with the previously solved wild type and P-loop mutant S238A structures of subunit A showed that the P-loop conformation for these two novel mutants occupy intermediate positions, with the wild type fully arched and the well-relaxed S238A mutant structures taking the extreme positions. Even though the deviation is similar for both mutants, the curvature of the P-loop faces the opposite direction. Deviations in the GER-loop, lying above the P-loop, are similar for both mutants, but in F236A, it moves towards the P-loop by around 2 Å. The curvature of the loop region V392-V410, located directly behind the P-loop, moves close by 3.6 Å towards the P-loop in the F236A structure and away by 2.5 Å in the P235A structure. Two major deviations were observed in the P235A mutant, which are not identified in any of the subunit A structures analyzed so far, one being a wide movement of the N-terminal loop region (R90-P110) making a rotation of 80° and the other being rigid-body rotation of the C-terminal helices from Q520-A588 by around 4° upwards. Taken together, the data presented demonstrate the concerted effects of the critical residues P235A, F236, and S238 in the unique P-loop conformation of the A-ATP synthases.     

Reconstitution and Engineering of Apoptotic Protein Interactions on the Bacterial Cell Surface

The interactions between pro- and anti-apoptotic members of the Bcl-2 class of proteins control whether a cell lives or dies, and the study of these protein-protein interactions has been an area of intense research. In this report, we describe a new tool for the study and engineering of apoptotic protein interactions that is based on the flow cytometric detection of these interactions on the surface of Escherichia coli. After validation of the assay with the well-studied interaction between the Bak(72-87) peptide and the anti-apoptotic protein Bcl-x_L, the effect of both increasing and decreasing Bak peptide length on Bcl-x_L binding was investigated. Previous work demonstrated that the Bak(72-87) peptide also binds to the anti-apoptotic protein Bcl-2, albeit with lower binding affinity compared to Bcl-x_L. Here, we demonstrate that a slightly longer Bak peptide corresponding to amino acids 72-89 of Bak binds Bcl-x_L and Bcl-2 equally well. Approximate binding affinity calculations on these peptide-protein complexes confirm the experimental observations. The flow cytometric assay was also used to screen a saturation mutagenesis library of Bak(72-87) variants for improved affinity to Bcl-x_L. The best variants obtained from this library exhibit an apparent K_d to Bcl-x_L 4-fold lower than that of wild-type Bak(72-87).     

The role of RNA sequence and structure in RNA--protein interactions

We investigate the sequence and structural properties of RNA-protein interaction sites in 211 RNA-protein chain pairs, the largest set of RNA-protein complexes analyzed to date. Statistical analysis confirms and extends earlier analyses made on smaller data sets. There are 24.6% of hydrogen bonds between RNA and protein that are nucleobase specific, indicating the importance of both nucleobase-specific and -nonspecific interactions. While there is no significant difference between RNA base frequencies in protein-binding and non-binding regions, distinct preferences for RNA bases, RNA structural states, protein residues, and protein secondary structure emerge when nucleobase-specific and -nonspecific interactions are considered separately. Guanine nucleobase and unpaired RNA structural states are significantly preferred in nucleobase-specific interactions; however, nonspecific interactions disfavor guanine, while still favoring unpaired RNA structural states. The opposite preferences of nucleobase-specific and -nonspecific interactions for guanine may explain discrepancies between earlier studies with regard to base preferences in RNA-protein interaction regions. Preferences for amino acid residues differ significantly between nucleobase-specific and -nonspecific interactions, with nonspecific interactions showing the expected bias towards positively charged residues. Irregular protein structures are strongly favored in interactions with the protein backbone, whereas there is little preference for specific protein secondary structure in either nucleobase-specific interaction or -nonspecific interaction. Overall, this study shows strong preferences for both RNA bases and RNA structural states in protein-RNA interactions, indicating their mutual importance in protein recognition.     

On the Structure of the Proton-Binding Site in the Fo Rotor of Chloroplast ATP Synthases

The recently reported crystal structures of the membrane-embedded proton-dependent c-ring rotors of a cyanobacterial F₁F_o ATP synthase and a chloroplast F₁F_o ATP synthase have provided new insights into the mechanism of this essential enzyme. While the overall features of these c-rings are similar, a discrepancy in the structure and hydrogen-bonding interaction network of the H⁺ sites suggests two distinct binding modes, potentially reflecting a mechanistic differentiation. Importantly, the conformation of the key glutamate side chain to which the proton binds is also altered. To investigate the nature of these differences, we use molecular dynamics simulations of both c-rings embedded in a phospholipid membrane. We observe that the structure of the c₁₅ ring from Spirulina platensis is unequivocally stable within the simulation time. By contrast, the proposed structure of the H⁺ site in the chloroplast c₁₄ ring changes rapidly and consistently into that reported for the c₁₅ ring, indicating that the latter represents a common binding mode. To assess this hypothesis, we have remodeled the c₁₄ ring by molecular replacement using the published structure factors. The resulting structure provides clear evidence in support of a common binding site conformation and is also considerably improved statistically. These findings, taken together with a sequence analysis of c-subunits in the ATP synthase family, indicate that the so-called proton-locked conformation observed in the c₁₅ ring may be a common characteristic not only of light-driven systems such as chloroplasts and cyanobacteria but also of a selection of other bacterial species.     

Mapping of protein-protein interaction sites by the 'absence of interference' approach

Protein-protein interactions are critical to most biological processes, and locating protein-protein interfaces on protein structures is an important task in molecular biology. We developed a new experimental strategy called the ‘absence of interference’ approach to determine surface residues involved in protein-protein interaction of established yeast two-hybrid pairs of interacting proteins. One of the proteins is subjected to high-level randomization by error-prone PCR. The resulting library is selected by yeast two-hybrid system for interacting clones that are isolated and sequenced. The interaction region can be identified by an absence or depletion of mutations. For data analysis and presentation, we developed a Web interface that analyzes the mutational spectrum and displays the mutational frequency on the surface of the structure (or a structural model) of the randomized protein†. Additionally, this interface might be of use for the display of mutational distributions determined by other types of random mutagenesis experiments. We applied the approach to map the interface of the catalytic domain of the DNA methyltransferase Dnmt3a with its regulatory factor Dnmt3L. Dnmt3a was randomized with high mutational load. A total of 76 interacting clones were isolated and sequenced, and 648 mutations were identified. The mutational pattern allowed to identify a unique interaction region on the surface of Dnmt3a, which comprises about 500-600 Å². The results were confirmed by site-directed mutagenesis and structural analysis. The absence-of-interference approach will allow high-throughput mapping of protein interaction sites suitable for functional studies and protein docking.     

Structural Analysis of Peroxide-Soaked MnSOD Crystals Reveals Side-On Binding of Peroxide to Active-Site Manganese

The superoxide dismutase (SOD) enzymes are important antioxidant agents that protect cells from reactive oxygen species. The SOD family is responsible for catalyzing the disproportionation of superoxide radical to oxygen and hydrogen peroxide. Manganese- and iron-containing SOD exhibit product inhibition whereas Cu/ZnSOD does not. Here, we report the crystal structure of Escherichia coli MnSOD with hydrogen peroxide cryotrapped in the active site. Crystallographic refinement to 1.55 Å and close inspection revealed electron density for hydrogen peroxide in three of the four active sites in the asymmetric unit. The hydrogen peroxide molecules are in the position opposite His26 that is normally assumed by water in the trigonal bipyramidal resting state of the enzyme. Hydrogen peroxide is present in active sites B, C, and D and is side-on coordinated to the active-site manganese. In chains B and D, the peroxide is oriented in the plane formed by manganese and ligands Asp167 and His26. In chain C, the peroxide is bound, making a 70° angle to the plane. Comparison of the peroxide-bound active site with the hydroxide-bound octahedral form shows a shifting of residue Tyr34 towards the active site when peroxide is bound. Comparison with peroxide-soaked Cu/ZnSOD indicates end-on binding of peroxide when the SOD does not exhibit inhibition by peroxide and side-on binding of peroxide in the product-inhibited state of MnSOD.     

Crystal structure of scytalidoglutamic peptidase with its first potent inhibitor provides insights into substrate specificity and catalysis

Scytalidoglutamic peptidase (SGP) from Scytalidium lignicolum is the founding member of the newly discovered\ family of peptidases, G1, so far found exclusively in fungi. The crystal structure of SGP revealed a previously undescribed fold for peptidases and a unique catalytic dyad of residues Gln53 and Glu136. Surprisingly, the beta-sandwich structure of SGP is strikingly similar to members of the carbohydrate-binding concanavalin A-like lectins/glucanases superfamily. By analogy with the active sites of aspartic peptidases, a mechanism employing nucleophillic attack by a water molecule activated by the general base functionality of Glu136 has been proposed. Here, we report the first crystal structures of SGP in complex with two transition state peptide analogs designed to mimic the tetrahedral intermediate of the proteolytic reaction. Of these two analogs, the one containing a central S-hydroxyl group is a potent sub-nanomolar inhibitor of SGP. The inhibitor binds non-covalently to the concave surface of the upper beta-sheet and enables delineation of the S4 to S3' substrate specificity pockets of the enzyme. Structural differences in these pockets account for the unique substrate preferences of SGP among peptidases having an acidic pH optimum. Inhibitor binding is accompanied by a structuring of the region comprising residues Tyr71-Gly80 from being mostly disordered in the apoenzyme and leading to positioning of crucial active site residues for establishing enzyme-inhibitor contacts. In addition, conformational rearrangements are seen in a disulfide bridged surface loop (Cys141-Cys148), which moves inwards, partially closing the open substrate binding cleft of the native enzyme. The non-hydrolysable scissile bond analog of the inhibitor is located in the active site forming close contacts with Gln53 and Glu136. The nucleophilic water molecule is displaced and a unique mode of binding is observed with the S-OH of the inhibitor occupying the oxyanion binding site of the proposed tetrahedral intermediate. Details of the enzyme-inhibitor interactions and mechanistic interpretations are discussed.     

A Survey of λ Repressor Fragments from Two-State to Downhill Folding

We survey the two-state to downhill folding transition by examining 20 λ_6-85^? mutants that cover a wide range of stabilities and folding rates. We investigated four new λ_6-85^? mutants designed to fold especially rapidly. Two were engineered using the core remodeling of Lim and Sauer, and two were engineered using Ferreiro et al.'s frustratometer. These proteins have probe-dependent melting temperatures as high as 80 °C and exhibit a fast molecular phase with the characteristic temperature dependence of the amplitude expected for downhill folding. The survey reveals a correlation between melting temperature and downhill folding previously observed for the β-sheet protein WW domain. A simple model explains this correlation and predicts the melting temperature at which downhill folding becomes possible. An X-ray crystal structure with a 1.64-Å resolution of a fast-folding mutant fragment shows regions of enhanced rigidity compared to the full wild-type protein.     

Structure of the Murine Unglycosylated IgG1 Fc Fragment

A prototypic IgG antibody can be divided into two major structural units: the antigen-binding fragment (Fab) and the Fc fragment that mediates effector functions. The IgG Fc fragment is a homodimer of the two C-terminal domains (C_H2 and C_H3) of the heavy chains. Characteristic of the Fc part is the presence of a sugar moiety at the inner face of the C_H2 domains. The structure of this complex branched oligosaccharide is generally resolved in crystal structures of Fc fragments due to numerous well-defined sugar-protein interactions and a small number of sugar-sugar interactions. This suggested that sugars play an important role in the structure of the Fc fragment. To address this question directly, we determined the crystal structure of the unglycosylated Fc fragment of the murine IgG1 MAK33. The structures of the C_H3 domains of the unglycosylated Fc fragment superimpose perfectly with the structure of the isolated MAK33 C_H3 domain. The unglycosylated C_H2 domains, in contrast, approach each other much more closely compared to known structures of partly deglycosylated Fc fragments with rigid-body motions between 10 and 14 Å, leading to a strongly “closed” conformation of the unglycosylated Fc fragment. The glycosylation sites in the C′E loop and the BC and FG loops are well defined in the unglycosylated C_H2 domain, however, with increased mobility and with a significant displacement of about 4.9 Å for the unglycosylated Asn residue compared to the glycosylated structure. Thus, glycosylation both stabilizes the C′E-loop conformation within the C_H2 domain and also helps to ensure an “open” conformation, as seen upon Fc receptor binding. These structural data provide a rationale for the observation that deglycosylation of antibodies often compromises their ability to bind and activate Fcγ receptors.     

Structural and Thermodynamic Characterization of Pre- and Postpolymerization States in the F4 Fimbrial Subunit FaeG

Enterotoxigenic Escherichia coli expressing F4 fimbriae are the major cause of porcine colibacillosis and are responsible for significant death and morbidity in neonatal and postweaned piglets. Via the chaperone-usher pathway, F4 fimbriae are assembled into thin, flexible polymers mainly composed of the single-domain adhesin FaeG. The F4 fimbrial system has been labeled eccentric because the F4 pilins show some features distinct from the features of pilins of other chaperone-usher-assembled structures. In particular, FaeG is much larger than other pilins (27  versus ∼ 17 kDa), grafting an additional carbohydrate binding domain on the common immunoglobulin-like core. Structural data of FaeG during different stages of the F4 fimbrial biogenesis process, combined with differential scanning calorimetry measurements, confirm the general principles of the donor strand complementation/exchange mechanisms taking place during pilus biogenesis via the chaperone-usher pathway.     

Energetics-based protein profiling on a proteomic scale: identification of proteins resistant to proteolysis

Native states of proteins are flexible, populating more than just the unique native conformation. The energetics and dynamics resulting from this conformational ensemble are inherently linked to protein function and regulation. Proteolytic susceptibility is one feature determined by this conformational energy landscape. As an attempt to investigate energetics of proteins on a proteomic scale, we challenged the Escherichia coli proteome with extensive proteolysis and determined which proteins, if any, have optimized their energy landscape for resistance to proteolysis. To our surprise, multiple soluble proteins survived the challenge. Maltose binding protein, a survivor from thermolysin digestion, was characterized by in vitro biophysical studies to identify the physical origin of proteolytic resistance. This experimental characterization shows that kinetic stability is responsible for the unusual resistance in maltose binding protein. The biochemical functions of the identified survivors suggest that many of these proteins may have evolved extreme proteolytic resistance because of their critical roles under stressed conditions. Our results suggest that under functional selection proteins can evolve extreme proteolysis resistance by modulating their conformational energy landscapes without the need to invent new folds, and that proteins can be profiled on a proteomic scale according to their energetic properties by using proteolysis as a structural probe.     

A new classification of membrane protein crystals

Although being much smaller than the number of soluble proteins in the Protein Data Bank, the number of membrane proteins therein now approaches 700, and a statistical analysis becomes meaningful. Such an analysis showed that the conventional subdivision into monotopic, β-barrel and α-helical membrane proteins is appropriate but should be amended by a classification according to the detergent micelle structure in the crystal, which can be derived from the packing of the membrane-immersed parts of the proteins. The crystal packing density is specific for the three conventional types of membrane proteins and soluble proteins. It is also specific for three observed detergent arrangements that are micelle pockets, micelle filaments and micelle sheets, demonstrating that the detergent structure affects crystallization. The packing density distribution of crystals from integral membrane proteins has approximately the same shape as that of soluble proteins but is by a factor of two broader and shifted to lower density. It seems unlikely that the differences can be explained by a mere solvent expansion due to the required detergent. The crystallized membrane proteins were further analyzed with respect to protein mass, oligomerization and crystallographic asymmetric unit, space group, crystal ordering and symmetry. The results provide a new view on membrane proteins.     

Systematic Mutational Analysis of Peptide Inhibition of the p53-MDM2/MDMX Interactions

Inhibition of the interaction between the tumor suppressor protein p53 and its negative regulators MDM2 and MDMX is of great interest in cancer biology and drug design. We previously reported a potent duodecimal peptide inhibitor, termed PMI (TSFAEYWNLLSP), of the p53-MDM2 and -MDMX interactions. PMI competes with p53 for MDM2 and MDMX binding at an affinity roughly 2 orders of magnitude higher than that of ^17-28p53 (ETFSDLWKLLPE) of the same length; both peptides adopt nearly identical α-helical conformations in the complexes, where the three highlighted hydrophobic residues Phe, Trp, and Leu dominate PMI or ^17-28p53 binding to MDM2 and MDMX. To elucidate the molecular determinants for PMI activity and specificity, we performed a systematic Ala scanning mutational analysis of PMI and ^17-28p53. The binding affinities for MDM2 and MDMX of a total of 35 peptides including 10 truncation analogs were quantified, affording a complete dissection of energetic contributions of individual residues of PMI and ^17-28p53 to MDM2 and MDMX association. Importantly, the N8A mutation turned PMI into the most potent dual-specific antagonist of MDM2 and MDMX reported to date, registering respective K_d values of 490 pM and 2.4 nM. The co-crystal structure of N8A-PMI-^25-109MDM2 was determined at 1.95 Å, affirming that high-affinity peptide binding to MDM2/MDMX necessitates, in addition to optimized intermolecular interactions, enhanced helix stability or propensity contributed by non-contact residues. The powerful empirical binding data and crystal structures present a unique opportunity for computational studies of peptide inhibition of the p53-MDM2/MDMX interactions.